Fastronix 3/8" Stud Terminal Covers Red and Black
Asin: B07NBKWT7Q | Ean: 0635414975844 | UPC: 635414975844
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Use With 2/0 Or Smaller Battery Cable.
Use With Fastronix 406-252 Junction Blocks.
Prevent Incidental Shorting.
Flexible Cover Is Designed To Fit Over 3/8" Stud And Nut.
Features
- Includes (1) Red and (1) Black Terminal Cover
- Flexible Cover is Designed to Fit over 3/8 Stud and Nut
- Use with 2/0 or Smaller Battery Cable
- Prevent Incidental Shorting
- Use with Fastronix 406-252 Junction Blocks
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
See On Amazon Similar To Fastronix 3 8 Stud Terminal
#1
AUCELI Battery Terminal Connector, Top Post Battery Cable Terminal Clamp Set, Positive and Negative 1 Pair with 2 Washers, Good Contact Corrosion Resistance Car Accessories for SUV Van Motorcycle
Asin: B0BYMWLBPH | Model: Terminal Clamp | PartNumber: Terminal Clamp
【Common Specification】: In The Battery Cable Terminal Clips, The Red Plastic Casing Is The Positive Battery Terminal And The Black Plastic Casing Is The Negative Battery Terminal, Red And Black Are A Pair. We Provide Two Kinds Of Packaging For You, One Pair And Two Pairs, So That You Can Choose To Buy According To Your Actual Needs..
【Thoughtful Design】: This Product Is Meticulously Made With Smooth Edges And Will Not Scratch Your Palm. The Small Size Is Easy To Store And Can Be Put Into A Car Storage Bag Or Door Storage Compartment For Storage And Organisation. Stylish And Well Chosen Materials, The Silver White Clean Galvanised Surface Can Effectively Enhance The Car Decoration..
【Easy To Install】: Each Connector Comes With A Corresponding M8 Nut And Washer For A Secure And Quick Installation. Easy To Remove, Easy To Clean And Take Care Of, No Damage To The Original Car. Note: Please Make Sure To Connect The Correct Terminals To The Correct Polarity..
【Widely Applicable】: The Positive And Negative Electrodes Have The Same Appearance, With Different Hole Diameter Sizes. The Positive Pole Hole Is 0.75 Inches (19Mm) In Diameter And The Negative Pole Is 0.67 Inches (17Mm). They Are Suitable For Most Car Models, Such As Sports Cars, Minivans, Suvs, Large Vans, Trucks, Taxis, Etc. Please Check If The Size Matches Your Car Before You Buy..
Features
- Rugged and Durable : The battery terminal connector is made of excellent iron galvanized material, which conducts electricity efficiently and reduces voltage distortion and transmission loss. Rugged and durable, with excellent resistance to rust, oxidation and corrosion. The protective shell is made of hard plastic, tightly waterproof and resistant to wear and tear.
- Widely Applicable : The positive and negative electrodes have the same appearance, with different hole diameter sizes. The positive pole hole is 0.75 inches (19mm) in diameter and the negative pole is 0.67 inches (17mm). They are suitable for most car models, such as sports cars, minivans, SUVs, large vans, trucks, taxis, etc. Please check if the size matches your car before you buy.
- Common Specification : In the battery cable terminal clips, the red plastic casing is the positive battery terminal and the black plastic casing is the negative battery terminal, red and black are a pair. We provide two kinds of packaging for you, one pair and two pairs, so that you can choose to buy according to your actual needs.
- Easy to Install : Each connector comes with a corresponding M8 nut and washer for a secure and quick installation. Easy to remove, easy to clean and take care of, no damage to the original car. Note: Please make sure to connect the correct terminals to the correct polarity.
- Thoughtful Design : This product is meticulously made with smooth edges and will not scratch your palm. The small size is easy to store and can be put into a car storage bag or door storage compartment for storage and organisation. Stylish and well chosen materials, the silver white clean galvanised surface can effectively enhance the car decoration.
- See more on Amazon...
Brand: AUCELI | Manufacturer: AUCELI
Dimensions: 0.10 x 0.70 x 0.30 inches | Weight: 0.11 pounds
Warranty: 0.2
See On Amazon #2
Schumacher Electric BAF-MT1 Zinc-Plated Marine Terminal Ends for 3/8-Inch and 5/16-Inch Battery Posts, With One-Year Limited Warranty, Silver, 2 Units
Asin: B0060YHLJS | Model: BAF-MT1 | PartNumber: BAF-MT1 | Ean: 0026666141376, 7294104199651 | UPC: 026666141376
Positive And Negative Terminal Ends: The Schumacher Electric Baf-Mt1 Zinc-Plated Marine Terminal Ends Includes One Positive 3/8-Inch Terminal End And One Negative 5/16-Inch Terminal End.
75 Years Of Innovation: Since 1947, Schumacher Electric Has Been Producing High-Quality Automotive Parts And Accessories, Battery Chargers, Jump Starters, And More.
In The Box: With Your Purchase, You Will Receive The Schumacher Electric Baf-Mt1 Zinc-Plated Marine Terminal Ends For 3/8-Inch And 5/16-Inch Battery Posts (2) And A One-Year Limited Warranty.
Superior Construction: The Schumacher Electric Baf-Mt1 Zinc-Plated Marine Terminal Ends Feature Heavy-Duty Zinc-Plated Construction For Superior Performance.
Schumacher Quality: For Reliable And Well-Made Replacement Parts For Your Schumacher Product Or Vehicle Battery, Look No Further Than The Schumacher Electric Line Of Battery Accessories And Parts.
Built Green: The Schumacher Electric Baf-Mt1 Zinc-Plated Marine Terminal Ends Meets The Standards Established For Rohs (Restriction Of Hazardous Substances) Compliance.
Reliable Replacement Parts: The Schumacher Electric Baf-Mt1 Zinc-Plated Marine Terminal Ends Are Three Times More Conductive Than Many Other Terminal Ends.
Features
- Designed for Marine Use: Easily replace your boat battery s terminal ends with the Schumacher Electric BAF-MT1 Zinc-Plated Marine Terminal Ends, a high-performance alternative
- Reliable Replacement Parts: The Schumacher Electric BAF-MT1 Zinc-Plated Marine Terminal Ends are three times more conductive than many other terminal ends
- Positive and Negative Terminal Ends: The Schumacher Electric BAF-MT1 Zinc-Plated Marine Terminal Ends includes one positive 3/8-inch terminal end and one negative 5/16-inch terminal end
- Built Green: The Schumacher Electric BAF-MT1 Zinc-Plated Marine Terminal Ends meets the standards established for RoHS (Restriction of Hazardous Substances) compliance
- Superior Construction: The Schumacher Electric BAF-MT1 Zinc-Plated Marine Terminal Ends feature heavy-duty zinc-plated construction for superior performance
- Schumacher Quality: For reliable and well-made replacement parts for your Schumacher product or vehicle battery, look no further than the Schumacher Electric line of battery accessories and parts
- 75 Years of Innovation: Since 1947, Schumacher Electric has been producing high-quality automotive parts and accessories, battery chargers, jump starters, and more
- In the Box: With your purchase, you will receive the Schumacher Electric BAF-MT1 Zinc-Plated Marine Terminal Ends for 3/8-Inch and 5/16-Inch Battery Posts (2) and a one-year limited warranty
- See more on Amazon...
First Available: 10/29/2011
Brand: Schumacher | Manufacturer: Schumacher
Dimensions: 6.00 x 2.00 x 4.00 inches | Weight: 0.50 pounds
Warranty: 1 Year Warranty
See On Amazon #3
Recoil 10 Pack Silicone Terminal Covers for Alternator Battery Stud and Power Junction Blocks, Fits 10-2AWG Wire, 5 Red and 5 Black Pairs
Asin: B08BL4S5YJ
Use With Wire Diameter Between 1/5" And 1/2" (10-2Awg), Simply Trim Material To Desired Opening Size.Includes 5 X Red And 5 X Black Covers.
High-Quality Silicone Rubber Material.Rated Temperature: -40C To 105C.
Great For Alternator, Starter, Solenoid, Or Power Junction Studs.
Professional Appearance Of Your Wiring.Use With 3/8”, 5/16" Or Smaller Studs To Fit Over Nut.
Features
- Protects battery and alternator connections from corrosion and shorting
- Professional appearance of your wiring.Use with 3/8 , 5/16 or smaller studs to fit over nut
- Use with wire diameter between 1/5 and 1/2 (10-2AWG), Simply trim material to desired opening size.Includes 5 x red and 5 x black covers
- Great for alternator, starter, solenoid, or power junction studs
- High-quality silicone rubber material.Rated temperature: -40C to 105C
- See more on Amazon...
Brand: RECOIL | Manufacturer: RECOIL
Warranty: 1 year manufacturer
See On Amazon #4
Schumacher BAF-TPT Zinc-Plated Top Post Terminal End - For Automotive Use
Asin: B0060YHIW8 | Model: BAF-TPT | PartNumber: BAF-TPT | Ean: 0026666141208 | UPC: 026666141208
High Conductivity: Three Times More Conductive Than Other Top Post Terminal Ends, The Schumacher Electric Baf-Tpt Heavy-Duty Zinc-Plated Top Post Terminal End, Is The Choice Of Professional Mechanics.
75 Years Of Innovation: Since 1947, Schumacher Electric Has Been Producing High-Quality Automotive Parts And Accessories, Battery Chargers, Jump Starters, And More.
In The Box: With Your Purchase, You Will Receive The Schumacher Electric Baf-Tpt Heavy-Duty Zinc-Plated Top Post Terminal End (1 Unit) And A One-Year Warranty.
Schumacher Quality: For Reliable And Well-Made Replacement Parts For Your Schumacher Product Or Vehicle Battery, Look No Further Than The Schumacher Electric Line Of Battery Accessories And Parts.
1-4/0 Gauge Compatible: The Schumacher Electric Baf-Tpt Heavy-Duty Zinc-Plated Top Post Terminal End Is Compatible With 1-4/0 Gauge Wires, Giving You Flexibility In Installation.
Features
- Zinc Plated: The Schumacher Electric BAF-TPT Heavy-Duty Zinc-Plated Top Post Terminal End is designed and built with zinc plating for superior conductivity, giving you better performance from your battery
- 1-4/0 Gauge Compatible: The Schumacher Electric BAF-TPT Heavy-Duty Zinc-Plated Top Post Terminal End is compatible with 1-4/0 gauge wires, giving you flexibility in installation
- High Conductivity: Three times more conductive than other top post terminal ends, the Schumacher Electric BAF-TPT Heavy-Duty Zinc-Plated Top Post Terminal End, is the choice of professional mechanics
- Schumacher Quality: For reliable and well-made replacement parts for your Schumacher product or vehicle battery, look no further than the Schumacher Electric line of battery accessories and parts
- 75 Years of Innovation: Since 1947, Schumacher Electric has been producing high-quality automotive parts and accessories, battery chargers, jump starters, and more
- In the Box: With your purchase, you will receive the Schumacher Electric BAF-TPT Heavy-Duty Zinc-Plated Top Post Terminal End (1 unit) and a one-year warranty
- See more on Amazon...
First Available: 10/29/2011
Brand: Schumacher | Manufacturer: Schumacher
Warranty: 1 Year
See On Amazon #5
Vgate 8-Way Lead Acid Battery Terminal Connector, AGM Post Terminal Ends, 8AWG up to 4/0(XL) AWG Gauge, Positive & Negative for SAE/DIN/EN Tapered Top Post
Asin: B0CB6CTHWK | Model: A-8 | PartNumber: A-8
🎁 - Battery Post Type: Sae/ Din/ En (But Jis Pencil Post Not Included)..
🎁 - To Ensure A Stable Installation, Do Not Use The Anti-Corrosion Washers..
🎁 - Battery Voltage: 48V, 36V, 24V, 12V, 6V..
🎁 - Battery Type: Lead Acid Battery (Agm, Gel, Wet, Mf And Ca/Ca)..
Features
- - Vgate 8-Way connectors: 4 x hole-holders and 4 x threaded studs. It contains two 2/0 AWG and two 1/0 AWG hole holders.
- - Battery Type: Lead Acid Battery (AGM, GEL, WET, MF and CA/CA).
- - Battery Post Type: SAE/ DIN/ EN (But JIS Pencil Post not Included).
- - Battery Voltage: 48V, 36V, 24V, 12V, 6V.
- - To ensure a stable installation, DO NOT use the anti-corrosion washers.
- See more on Amazon...
Brand: Vgate | Manufacturer: Vgatemall
Weight: 0.66 pounds
See On Amazon #6
InstallGear 2,4,8 or 10 Gauge Battery Terminals w/Shims - Positive & Negative | Car Battery Terminal, Battery Pack, Heavy Duty Battery Terminal Connectors, 2 Gauge, 4 Gauge, 8 Gauge, & 10 Gauge Wires
Asin: B00NQ7U982 | Model: IGBT-2 | PartNumber: IGBT-2 | Ean: 0753968370981, 0839868005168 | UPC: 753968370981, 839868005168
Effortless Installation: No More Complex Installations With Installgear Battery Terminals. Designed For Fast And Hassle-Free Setup, These Terminals Streamline The Process, Saving You Valuable Time And Effort. Enjoy The Convenience Of A Straightforward Installation Process Without Compromising On Quality Or Reliability..
Optimal Signal Transfer: Maximize Signal Transfer Efficiency With Installgear Battery Terminals. Crafted From Nickel And Gold Materials, These Terminals Ensure Excellent Conductivity, Resulting In Superior Signal Transmission. Enjoy Enhanced Performance And Reliability With Terminals Designed To Deliver Exceptional Signal Transfer While Adding A Touch Of Style To Your Setup..
Comprehensive Set: Equip Your Car Battery Using Installgear Battery Terminals. Each Pack Includes One Negative And One Positive Terminal, Providing A Complete Solution For Your Battery Connection Needs. This Comprehensive Set Has You Covered Either You're Replacing Old Terminals Or Upgrading Your System..
Secure Cable Connection: Our Battery Terminals Have Gold Screw Terminals That Firmly Hold Cables In Place. No More Worrying About Loose Connections Or Potential Disruptions In Power Supply. Installgear Battery Terminals Ensure A Reliable And Secure Link Between Your Car Battery Terminal And Connected Wiresb For Uninterrupted Performance..
Features
- VERSATILE GAUGE INPUTS: Easily connect various wire gauges with precision using InstallGear heavy duty battery terminal. Featuring designated inputs for 2, 4, 8, and 10 gauge wires, these terminals ensure a snug fit for optimal conductivity. One 2 Gauge Input; One 4 Gauge Input; Two 8/10 Gauge Inputs. These terminals accommodate all with ease.
- SECURE CABLE CONNECTION: Our battery terminals have gold screw terminals that firmly hold cables in place. No more worrying about loose connections or potential disruptions in power supply. InstallGear Battery Terminals ensure a reliable and secure link between your car battery terminal and connected wiresb for uninterrupted performance.
- EFFORTLESS INSTALLATION: No more complex installations with InstallGear Battery Terminals. Designed for fast and hassle-free setup, these terminals streamline the process, saving you valuable time and effort. Enjoy the convenience of a straightforward installation process without compromising on quality or reliability.
- COMPREHENSIVE SET: Equip your car battery using InstallGear Battery Terminals. Each pack includes one negative and one positive terminal, providing a complete solution for your battery connection needs. This comprehensive set has you covered either you're replacing old terminals or upgrading your system.
- OPTIMAL SIGNAL TRANSFER: Maximize signal transfer efficiency with InstallGear Battery Terminals. Crafted from nickel and gold materials, these terminals ensure excellent conductivity, resulting in superior signal transmission. Enjoy enhanced performance and reliability with terminals designed to deliver exceptional signal transfer while adding a touch of style to your setup.
- See more on Amazon...
Brand: InstallGear | Manufacturer: InstallGear
Weight: 1.10 Pounds
See On Amazon #7
Joinfworld Power Distribution Block 12V 3/8" Single Stud Bus Bar M10 Insulated Battery Post Junction Block for Marine Boat Automotive - Positive&Negative
Asin: B0B2LK7KDR | Model: BB1-1A-RB | PartNumber: BB1-1A-RB | Ean: 0751717591588 | UPC: 751717591588
★ 3/8" Stud Terminal ★ - The Battery Post Is Single 3/8" M10 Stud Terminal Design, Which Makes The 12V Bus Bar Terminal Block Be Able To Accept Large Size Terminal Connectors And Wires..
★ Application ★ - The Heavy Duty Insulated Junction Post Block Aims To Make The Wiring Of Circuit Become Neat And Tidy, Prevent Electric Short Circuit, Suitable For Automotive, Car, Truck, Marine, Boat, Solar Panel, Etc..
★ 316 Stainless Steel Material ★ - The Stud Of The Terminal Post Is Made Of 316 Stainless Steel, Which Makes This 12V Junction Post Have Better Corrosion Resistance Performance Compared With 304 Stainless Steel Made Battery Bus Bar..
★ Rating ★ - The 12V Battery Junction Block Rated 250A When Work In 12V Circuit, And The Battery Junction Block Can Work With Max 48V Power..
Features
- Product - A pair of single stud terminal 12V junction block, includes a positive power distribution block red and a negative power distribution block black.
- Rating - The 12v battery junction block rated 250A when work in 12v circuit, and the battery junction block can work with MAX 48v power.
- 3/8 Stud Terminal - The battery post is single 3/8 M10 stud terminal design, which makes the 12v bus bar terminal block be able to accept large size terminal connectors and wires.
- 316 Stainless Steel Material - The Stud of the terminal post is made of 316 stainless steel, which makes this 12v junction post have better corrosion resistance performance compared with 304 stainless steel made battery bus bar.
- Application - The Heavy Duty Insulated Junction Post Block aims to make the wiring of circuit become neat and tidy, prevent electric short circuit, suitable for automotive, car, truck, marine, boat, Solar Panel, etc.
- See more on Amazon...
Brand: Joinfworld | Manufacturer: Joinfworld
See On Amazon #8
Fastronix Red and Black Top Post Style Flexible Battery Terminal Cover
Asin: B011CO8806 | Model: 404-100 | PartNumber: 404-100 | Ean: 0638037089448 | UPC: 638037089448
Includes 1 Red And 1 Black Terminal Cover.
Use With Fastronix 405-003 And 405-004 For A Complete Installation.
Slides On Up To 2/0 Gauge Cable Prior To Installing Battery Terminal.
Features
- Use for a Professional looking Battery Installation
- Slides on up to 2/0 Gauge Cable Prior to Installing Battery Terminal
- Includes 1 Red and 1 Black Terminal Cover
- Use with Fastronix 405-003 and 405-004 for a Complete Installation
- See more on Amazon...
Brand: Fastronix Solutions
See On Amazon #9
Ampper 3/8" Single Stud Battery Junction Posts Block, Heavy Duty Power and Ground Junction Block Power Distribution Studs Terminal Kit, Pack of 2 (Red and Black)
Asin: B09T6KHBTK | Model: Am-BJPS21 | PartNumber: Am-BJPS21
Fitment: 200 A Continuous At Dc 12V, Fit For Max Up To Dc 48V Power Distribution Stud Application..
Compatible: Used As Battery Junction Block, For Car, Vehicle, Rv And Boat, Also Electrical Equipment And Solar Cells Etc...
Heavy Duty: Nylon Construction With Stainless Steel Stud For Strength And Durability..
Easy To Install: Panel Surface Install With Screw Mounting Holes For Any Orientation Installation..
Features
- Function: used to connect two or more connectors / wires, as battery junction post for battery power and ground junction. Very useful for customizing or relocating battery and wires.
- Easy to install: panel surface install with screw mounting holes for any orientation installation.
- Fitment: 200 A continuous at DC 12V, fit for max up to DC 48V power distribution stud application.
- Heavy Duty: nylon construction with stainless steel stud for strength and durability.
- Compatible: used as battery junction block, for car, vehicle, Rv and boat, also electrical equipment and solar cells etc..
- See more on Amazon...
Brand: Ampper | Manufacturer: Ampper
Dimensions: 0.70 x 2.00 x 0.70 inches | Weight: 0.13 pounds
See On Amazon #10
Fastronix 3/8" 2 Post 180/1000 Amp High Current Battery Disconnect Switch
Asin: B011EYWMDS | Model: 303-001 | PartNumber: 303-001 | Ean: 0638037089455 | UPC: 638037089455
Provides Single Power Cut Off To Entire Electrical System.
Works Great As A Power Disconnect For Rv's When Not In Use.
Fastronix 404-110 Terminal Covers Provide Electrical Protection To The Studs.
Required For Nhra Competition When Battery Is Relocated.
Mounts In 3/4" Hole Or Add Fastronix 980-000 Switch Mount To Install On Any Surface With Two 1/4" Holes..
Features
- Rated to 180A Continuous or 1000A Intermittent
- Mounts in 3/4 Hole or Add Fastronix 980-000 Switch Mount to Install on any Surface with Two 1/4 Holes.
- Provides Single Power Cut off to Entire Electrical System
- Required for NHRA Competition When Battery is Relocated
- Works Great As a Power Disconnect for RV's When Not in Use
- Fastronix 404-110 Terminal Covers Provide Electrical Protection to the Studs
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Weight: 0.22 Pounds
See On Amazon #11
YZQPNB Battery Disconnect Switch with Lockout Plate Fits Negative Battery Doctor Replace 20247, 500A 12V-36V Master Battery Kill Switch Fixed Handle Isolator for Car Auto RV and Boat Waterproof
Asin: B09W5KDTN2 | Model: 500A | PartNumber: 500A
【Specifications】Working Voltage: 12V 24V 36V , Rated Current: 500A, Instantaneous Current: 5000A. Two 10Mm Threaded Studs With Nuts For The Negative Battery Cable..
【Warranty】The Battery Disconnect Switch From Ket Comes Complete With A Lifetime Warranty.If There Is Any Problem On Your Car, Auto, Boat Or Rv, Please Contact Us To Solve The Problem For You Immediately..
【Features】Connection Material Silver Plated Copper. Features Sealed, Waterproof Design, Heavy Duty Fixed Die Cast Handle,Includes Lockout / Mounting Bracket..
【Operation】Just Turn The Knob To Turn It On Or Off. The Knob Switch Can Be Locked On The Panel To Prevent Accidental Closing Or Opening..
Features
- Wide Application Battery disconnect switch is widely used for cars, autos, boats, RVs, yachts, trucks and engineering vehicles.
- Operation Just turn the knob to turn it on or off. The knob switch can be locked on the panel to prevent accidental closing or opening.
- Specifications Working voltage: 12V 24V 36V , rated current: 500A, instantaneous current: 5000A. Two 10mm threaded studs with nuts for the negative battery cable.
- Features Connection material silver plated copper. Features sealed, waterproof design, heavy duty fixed die cast handle,includes lockout / mounting bracket.
- Warranty The battery disconnect switch from KET comes complete with a lifetime warranty.If there is any problem on your car, auto, boat or RV, please contact us to solve the problem for you immediately.
- See more on Amazon...
Brand: YZQPNB | Manufacturer: BaoSJ
Weight: 0.00 Pounds
See On Amazon #12
Schumacher Electric BAF-MT2 Coated Marine Terminal Ends and Felt Post Washers for 3/8-Inch and 5/16-Inch Battery Posts, Zinc-Plated, Red, Black, Green, 2 Sets
Asin: B0060YHP3A | Model: BAF-MT2 | PartNumber: BAF-MT2 | Ean: 0026666141383 | UPC: 026666141383
Built Green: The Schumacher Electric Baf-Mt2 Coated Marine Terminal Ends And Felt Post Washers Meet The Standards Established For Rohs (Restriction Of Hazardous Substances) Compliance.
75 Years Of Innovation: Since 1947, Schumacher Electric Has Been Producing High-Quality Automotive Parts And Accessories, Battery Chargers, Jump Starters, And More.
In The Box: With Your Purchase, You Will Receive (2) Schumacher Electric Baf-Mt2 Coated Marine Terminal Ends For 3/8-Inch And 5/16-Inch Battery Posts, (2) Felt Post Washers, And A One-Year Warranty.
Schumacher Quality: For Reliable And Well-Made Replacement Parts For Your Schumacher Product Or Vehicle Battery, Look No Further Than The Schumacher Electric Line Of Battery Accessories And Parts.
Secure Fit: The Schumacher Electric Baf-Mt2 Coated Marine Terminal Ends And Post Washers Are Designed And Built To Fit Snugly On 3/8-Inch And 5/16-Inch Battery Posts.
Features
- Zinc-Plated Terminal Ends: The Schumacher Electric BAF-MT2 Coated Marine Terminal Ends feature zinc plating for three times more conductivity than uncoated battery terminal ends
- Secure Fit: The Schumacher Electric BAF-MT2 Coated Marine Terminal Ends and post washers are designed and built to fit snugly on 3/8-inch and 5/16-inch battery posts
- Built Green: The Schumacher Electric BAF-MT2 Coated Marine Terminal Ends and Felt Post Washers meet the standards established for RoHS (Restriction of Hazardous Substances) compliance
- Schumacher Quality: For reliable and well-made replacement parts for your Schumacher product or vehicle battery, look no further than the Schumacher Electric line of battery accessories and parts
- 75 Years of Innovation: Since 1947, Schumacher Electric has been producing high-quality automotive parts and accessories, battery chargers, jump starters, and more
- In the Box: With your purchase, you will receive (2) Schumacher Electric BAF-MT2 Coated Marine Terminal Ends for 3/8-Inch and 5/16-Inch Battery Posts, (2) felt post washers, and a one-year warranty
- See more on Amazon...
First Available: 10/29/2011
Brand: Schumacher | Manufacturer: Schumacher Electric Corporation
Weight: 0.53 Pounds
Warranty: 1 Year Warranty
See On Amazon #13
2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors Kit Positive and Negative Set Red & Black
Asin: B07J32TGHZ | Ean: 0729270261613 | UPC: 729270261613
【Easy To Use】Our Products——The Battery Post Terminals Connectors Copper Color: Red(+) & Black(-).Wiring Is Easy To Modify And Connection Is Firm. Batteries Can Be Connected To The Battery Posts By Pressing Down The Lever, So No Tools Are Needed..
【You Will Get】2Pcs Pure Copper Battery Terminals Connectors.I Believe Our Product Can Fully Meet Your Requirements. If You Have Any Questions, Please Feel Free To Come To Us, We Will Provide High-Quality Guarantee And Friendly Customer Service..
【Wide Application】These Battery Terminal Connectors Can Be Used For Most 6/12V Cars, Vans, Caravan, Motorhomes, Boat, Truck Batteries Etc. Just Make Sure To Connect The Correct Terminal For The Correct Polarity..
【Sturdy & Durable】Our Quick Disconnect Battery Terminal Made Of Tinned Copper Not Only Have Good Conductivity And Corrosion Resistance, But Also Can Reduce Voltage Distortion And Transmission Loss.Positive Negative Battery Terminal Material: Pure Copper + Plastic..
Features
- Dimension Size: Appro2.16X1.37X1.77 inch (As the picture show) .
- Sturdy & Durable Our quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss.Positive Negative Battery Terminal Material: Pure Copper + Plastic.
- Easy to use Our products the battery post terminals Connectors Copper Color: Red(+) & Black(-).Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed.
- Wide application These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity.
- You will get 2Pcs pure copper battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service.
- See more on Amazon...
Brand: HUSUKU | Manufacturer: HUSUKU
Weight: 0.29 pounds
See On Amazon #14
ZOZOMOTORS 3/8" Side Post Remote Battery Disconnect Switch 12V Battery Kill Switch for Car Truck UTV ATV Marine Anti Theft Battery Cut/Shut Off Switch, 200/1000 AMP Heavy Duty, On/Off
Asin: B0C6HXBPHY
Parts Specifications Are On Product Image 7 For You To Verify Whether It Fits Your Equipment. Copper Bridges With 3/8" Diameter Holes. Relay Switch Stud Terminal Size: 1/4" (7Mm) X 2. Recommend Install On The Negative Side Of The Battery. Installation On The Positive Side Is Also Allowed. This Switch Can Be Used To Disconnect 12V System Including Cars, Trucks, Rvs, Boats, And Other Equipment.
Reminder. This Switch Is To Disconnect Power Directly From The Battery, Electronics That Store Data, Like Your Radio, Will Lose Memory. California Users Must Keep The Battery Connected Without Activating The Switch For Several Days Before A Smog Test.
Easy To Install, Wiring Diagram Is Provided. You Can Check The Clearance Around The Negative Pole Of Your Battery (Refer To Product Image 3). An Easy-To-Follow Wiring Diagram Is Included In The Package. The Red And Black Wires Power The Remote Receiver In The Relay And Should Always Go To The Positive And Negative Battery Poles Respectively. One Side Stud Terminal Of The Relay Goes To The Negative Pole On The Battery, And The Other Gets The Negative Wire From The Car.
Heavy Duty / High Current Device. High Current Rated To 200A Continuous / 1000A Crank Amps. Enough Crank Amps To Start Your Car In Cold Weather. This Is A High Quality Solid State Relay With A Remote Control Receiver Circuit Built Into It. This Switch Lasts 3-4 Times Longer Than An Ordinary Relay Switch. Zozomotors Uses High Quality & Durable Parts Only. The Current Draw Of This Switch (The Remote Receiver) Is 0.001 - 0.005 Amps While Connected. It's Very Minor.
Features
- 100M REMOTE CONTROL BATTERY DISCONNECT SWITCH. 100M remote battery kill switch used for 12V equipment that not in use, prevent battery from parasitic drain or as a theft deterrent. Convenient FOB remote control, no need to open the hood to disconnect battery, just a quick button push. The remote is preprogrammed and ready to go out of the box
- HEAVY DUTY / HIGH CURRENT DEVICE. High current rated to 200A Continuous / 1000A Crank Amps. Enough crank amps to start your car in cold weather. This is a high quality solid state relay with a remote control receiver circuit built into it. This switch lasts 3-4 times longer than an ordinary relay switch. ZOZOMOTORS uses high quality & durable parts only. The current draw of this switch (the remote receiver) is 0.001 - 0.005 AMPS while connected. it's very minor
- PARTS SPECIFICATIONS ARE ON PRODUCT IMAGE 7 FOR YOU TO VERIFY WHETHER IT FITS YOUR EQUIPMENT. Copper bridges with 3/8 diameter holes. Relay switch stud terminal size: 1/4 (7mm) x 2. Recommend install on the NEGATIVE SIDE of the battery. Installation on the positive side is also allowed. This switch can be used to disconnect 12V system including cars, trucks, RVs, boats, and other equipment
- EASY TO INSTALL, WIRING DIAGRAM IS PROVIDED. You can check the clearance around the negative pole of your battery (refer to product image 3). An easy-to-follow wiring diagram is included in the package. The red and black wires power the remote receiver in the relay and should always go to the positive and negative battery poles respectively. One side stud terminal of the relay goes to the negative pole on the battery, and the other gets the negative wire from the car
- REMINDER. This switch is to disconnect power directly from the battery, electronics that store data, like your radio, will lose memory. California users must keep the battery connected without activating the switch for several days before a smog test
- See more on Amazon...
Brand: ZOZOMOTORS | Manufacturer: ZOZOMOTORS Automotive
Dimensions: 2.36 x 5.91 x 3.94 inches | Weight: 0.10 pounds
See On Amazon #15
Vgate 20-Way Lead Acid Battery Post Terminal Ends Distribution Block Bus Bar, 8AWG up to 4/0(XL) Wire Gauge for Tapered Top Post SAE/DIN/EN
Asin: B0B45SCL38 | Model: AM-20 - 8 to 4/0 AWG | PartNumber: AM-20 - 8 to 4/0 AWG
🏆 - Battery Post Type: Sae/ Din/ En (But Jis Pencil Post Not Included).
🏆 - Battery Voltage: 48V, 36V, 24V, 12V, 6V.
🏆 - Battery Type: Lead Acid Battery (Agm, Gel, Wet, Mf And Ca/Ca). For Lithium Battery, Stud Post Adapter Required..
🏆 - Upgrade: Suitable For Various Wire Gauges, 8 Awg Up To 2/0 Awg Input Hole Holders..
Features
- - 20-Way Multi-Size connectors: 8 x input hole holders and 12 x threaded studs.
- - Upgrade: Suitable for various wire gauges, 8 AWG up to 2/0 AWG input hole holders.
- - Battery Post Type: SAE/ DIN/ EN (But JIS Pencil Post not Included)
- - Battery Type: Lead Acid Battery (AGM, GEL, WET, MF and CA/CA). For Lithium Battery, Stud Post Adapter Required.
- - Battery Voltage: 48V, 36V, 24V, 12V, 6V
- See more on Amazon...
Brand: Vgate | Manufacturer: Vgatemall
Weight: 1.06 Pounds
See On Amazon #16
3/8" Copper Battery Terminal Stud Connector, Ampper M10 Remote Battery Binding Post Junction Post Block Terminal Kit, Pack of 2 (Red and Black)
Asin: B089FF3185
Mount In Panels Or Battery Box, Can Hook The Wires Inside And Outside..
1 Set Of Remote Battery Binding Post With Nuts, Recommend Professional Installation..
Compatible: Used For Battery Box And Panels, For Car, Vehicle, Rv And Boat, Also Electrical Equipment And Solar Cells Etc...
Easy To Install: 2 Sets Of Nut Systems Make It Simple And Flexible To Extend, Tighten And Assemble The Connector..
Features
- Made of copper with red and black mark, used to connect two or more connectors / wires, as remote battery junction post for battery power and ground junction.
- Easy to install: 2 sets of nut systems make it simple and flexible to extend, tighten and assemble the connector.
- Mount in panels or battery box, can hook the wires inside and outside.
- Compatible: used for battery box and panels, for car, vehicle, Rv and boat, also electrical equipment and solar cells etc..
- 1 Set of remote battery binding post with nuts, recommend professional installation.
- See more on Amazon...
Brand: Ampper | Manufacturer: Ampper
Dimensions: 1.00 x 3.00 x 0.70 inches | Weight: 0.25 pounds
See On Amazon #17
LC LICTOP 5/16 Stud Premium Remote Battery Power Junction Post Connector Terminal Kit,Pack of 2 (8mm Red & Black)
Asin: B07M69KV8D | Model: LXMY0360 | PartNumber: LXMY0360 | Ean: 0754021107841 | UPC: 754021107841
Features: Pure Copper Terminal Block, High Efficiency, Bakelite Insulation Materials, With Perfect Safety Performance..
Application: Widely Used In The Separation And Distribution Of Welding Machines, Charging Generators, Ships, Trucks, Automobiles.
Easy To Install: 2 Nut System Is Simple To Install And Flexible To Tighten The Connector Without Worrying About Loosening The Bolt From The Bolt..
8Mm(5/16") Stud Design High Current Terminal Block.Easy To Install And Flexible To Use..
Features
- Package includes: 2 x Stud Connector (Black x 1; Red x 1)
- 8mm(5/16) stud design high current terminal block.Easy to install and flexible to use.
- Features: Pure copper terminal block, high efficiency, bakelite insulation Materials, with perfect safety performance.
- Easy to install: 2 nut system is simple to install and flexible to tighten the connector without worrying about loosening the bolt from the bolt.
- Application: Widely used in the separation and distribution of welding machines, charging generators, ships, trucks, automobiles
- See more on Amazon...
Brand: LC LICTOP | Manufacturer: Shenzhenshilixiangmaoyiyouxiangongsi
Weight: 0.09 Kilograms
See On Amazon #18
Universal 2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors,Negative with Protective Cover,Copper Plate with 3 Bolt for Car,Boat,Van
Asin: B0BYV437Y3 | Model: BT-BR-ME-12 | PartNumber: BT-BR-ME-12
🚔【Wide Application】These Battery Terminal Connectors Can Be Used For Most 6/12V Cars, Vans, Caravan, Motorhomes, Boat, Truck Batteries Etc. Just Make Sure To Connect The Correct Terminal For The Correct Polarity..
❤【You Will Get】2Pcs Battery Terminals Connectors.I Believe Our Product Can Fully Meet Your Requirements. If You Have Any Questions, Please Feel Free To Come To Us, We Will Provide High-Quality Guarantee And Friendly Customer Service..
❤【Important Notice】：Before Installation, Please Make Sure That The Battery Is In A De-Energized State. If The Original Terminal Has Deteriorated, Please Replace It With A New Terminal Immediately.Battery Terminals For Cars, Caravans, Rvs, Trucks, Houseboats, Motorcycles, Forklifts, Cranes..
🚔【Easy To Install】Use Wrenche To Tighten The Wires And To Attach The Terminal To The Post.Just Make Sure That The Positive Clip Is Connected To The Positive Pole And The Negative Pole Is Connected To The Negative Pole, Which Is Easy To Identify The Installation And Prevent The Risk Of Electric Shock..
Features
- Clamping up to 3 cables 3 - way car battery terminals can support multiple cables at the same time, which is very suitable for use when installing audio and other equipment, makes the cable only one.
- Easy to install Use wrenche to tighten the wires and to attach the terminal to the post.Just make sure that the positive clip is connected to the positive pole and the negative pole is connected to the negative pole, which is easy to identify the installation and prevent the risk of electric shock.
- Wide application These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity.
- IMPORTANT NOTICE Before installation, please make sure that the battery is in a de-energized state. If the original terminal has deteriorated, please replace it with a new terminal immediately.Battery terminals for Cars, caravans, RVs, trucks, houseboats, motorcycles, forklifts, cranes.
- You will get 2Pcs battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service.
- See more on Amazon...
Brand: Cannonfish | Manufacturer: Cannonfish
Dimensions: 0.90 x 2.30 x 1.50 inches
See On Amazon #19
Recoil STC10-8 8 Pack Silicone Terminal Covers for Alternator Battery Stud and Power Junction Blocks, Fits 2AWG to 1/0AWG Wire, 4 Red and 4 Black Pairs
Asin: B08RJ4Z9G6
Use With Wire Diameter Between 0.5" And 0.6" (2Awg-1/0Awg), Simply Trim Material To Desired Opening Size.
High-Quality Silicone Rubber Material. Rated Temperature: -40C To 105C.
Includes 4 X Red And 4 X Black Covers. Great For Alternator, Starter, Solenoid, Or Power Junction Studs.
Professional Appearance Of Your Wiring. Use With 3/8”, 5/16" Or Smaller Studs To Fit Over Nut.
Features
- Protects battery and alternator connections from corrosion and shorting
- Professional appearance of your wiring. Use with 3/8 , 5/16 or smaller studs to fit over nut
- Use with wire diameter between 0.5 and 0.6 (2AWG-1/0AWG), Simply trim material to desired opening size
- Includes 4 x red and 4 x black covers. Great for alternator, starter, solenoid, or power junction studs
- High-quality silicone rubber material. Rated temperature: -40C to 105C
- See more on Amazon...
Brand: RECOIL | Manufacturer: RECOIL
See On Amazon
Looking For Something Else?
Search