uxcell 3mm to 6mm Bore Rigid Coupling Set Screw L20XD12 Aluminum Alloy,Shaft Coupler Connector for RC Airplane Boat, Motor Accessories,Red,2pcs
Asin: B07P82BRRB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 3mm to 6mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon Similar To uxcell 3mm to 6mm Bore
#1
uxcell Tungsten Carbide Rotary Files 1/8" Shank, Double Cut Ball Shape Rotary Burrs Tool 6mm Dia, for Die Grinder Drill Bit Wood Soft Metal Carving Polishing Model Engineering, 3pcs
Asin: B07NRHRM92 | Model: a18121200ux0625 | PartNumber: a18121200ux0625
Double Cut Design: The Groove Lines Are Crossed. Double Groove Rotary Files Are More Suitable For The Object Density Is Relatively Low, Such As Wood, Plastic, Aluminum. With Good Milling And Cutting Performance, Ensures High Work Efficiency..
Tips: Requirement Of The Carbide Burrs Rotating Speed Is: 4000-50000 Rpm. Always Ensure Your Burrs Shank Is Well Inserted Into Your Collet And Clamped Down Tightly.
Versatile Use: Widely Used For Metalwork, Tool Making, Model Engineering, Wood Carving, Jewelry Making,Welding, Chamfering, Casting, Deburring, Grinding, Sculpting.
Long Working Life: Made Of Heat-Treated Tungsten Carbide That Hardness Can Be Up To Above Hra85, Sharp And Sturdy, Long Service Life.
Features
- Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders
- Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life
- Double Cut Design: The groove lines are crossed. Double groove rotary files are more suitable for the object density is relatively low, such as wood, plastic, aluminum. With good milling and cutting performance, ensures high work efficiency.
- Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting
- Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 0.79 x 0.79 inches
See On Amazon #2
uxcell MR106-2RS Deep Groove Ball Bearings 6mm Inner Dia 10mm OD 3mm Bore Double Sealed Chrome Steel Blue Seal Z2 10pcs
Asin: B082PPH3Z2 | Model: a19092000ux1265 | PartNumber: a19092000ux1265
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 174 Newtons And Dynamic Load Rating Of 422 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr106-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR106-2RS (I.D.=6mm, O.D.=10mm, Thickness=3mm)
- mr106-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 174 newtons and dynamic load rating of 422 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.02 Pounds
See On Amazon #3
uxcell 606-2RS Deep Groove Ball Bearing Double Sealed 180016 6mm x 17mm x 6mm High Carbon Steel Z1 Bearings Pack of 10
Asin: B07FF6FSK7 | Model: a18051900ux0204 | PartNumber: a18051900ux0204
Made From High Carbon Steel, Durability And Resistance To Under Heavy Loads.
Same As 606-2Rs / 180016. Pre-Lubricated, Easy To Maintain.
Abec Tolerance 1 (P0), Z1 Noise Level For Most General Use.
Sealed On Both Sides Of The Bearing To Keep Lubricant In. Suitable For Complex Environment.
Features
- Size: 606-2RS (Inner Dia.=6mm, Outer Dia.=17mm, Thickness=6mm)
- Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
- Made from High Carbon Steel, durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
- Same As 606-2RS / 180016. Pre-Lubricated, Easy to maintain
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 10pcs Round Steel Metal Rods, 3mm x 100mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft, 10pcs
Asin: B07KY8GK5W | Model: a18102400ux0350 | PartNumber: a18102400ux0350
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 3mm / 0.12"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 1.18 inches
See On Amazon #5
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell MR106-2RS Deep Groove Ball Bearings 6mm Inner Dia 10mm OD 3mm Bore Double Sealed Chrome Steel Z2 10pcs
Asin: B082PSCNKB | Model: a19092000ux1267 | PartNumber: a19092000ux1267
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 174 Newtons And Dynamic Load Rating Of 422 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr106-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR106-2RS (I.D.=6mm, O.D.=10mm, Thickness=3mm)
- mr106-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 174 newtons and dynamic load rating of 422 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell F623ZZ Flanged Ball Bearing 3x10x4mm Shielded Chrome Steel Bearings 10pcs
Asin: B07Z3CHXT5 | Model: a19091100ux0610 | PartNumber: a19091100ux0610
[Load & Speed] - Dynamic Load Rating Of 536N And Static Load Rating Of 175N. The Limiting Speed Is 50000 Rpm Under Grease Lubricating..
[Application] - Commonly Used For Glider/Rocker Arm, Wheel Of The Cart, Lawnmower, Printers, Fax Machines, Power Tools, And Other Homemade Projects..
[Easy To Maintain] - Shields On Both Sides To Keep Lubricant In. Z1 Noise Level For Most General Use..
[Durable] - Chrome Steel (Gcr15) Races Offer High Hardness And Great Wear Resistance, Thus Extend Bearings' Service Life..
Features
- [Size] - F623ZZ ABEC1 bearing (I.D.=3mm, O.D.=10mm, Thickness=4mm, Flange Dia: 11.5mm).
- [Durable] - Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings' service life.
- [Load & Speed] - Dynamic load rating of 536N and static load rating of 175N. The limiting speed is 50000 RPM under grease lubricating.
- [Easy to Maintain] - Shields on Both sides to keep lubricant in. Z1 noise level for most general use.
- [Application] - Commonly used for glider/rocker arm, wheel of the cart, lawnmower, printers, fax machines, power tools, and other homemade projects.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Chucking Reamer 10mm, H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Metric Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07K45GL21 | Model: a18092000ux0050 | PartNumber: a18092000ux0050
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 10mm / 0.39"; Tool flute length: 38mm / 1.5"; Overall length: 124mm / 4.88". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 5.91 x 0.79 inches
See On Amazon #9
uxcell MR63-2RS Deep Groove Ball Bearings 3mm Inner Dia 6mm OD 2.5mm Bore Double Sealed Chrome Steel Z2 4pcs
Asin: B082PRWP46 | Model: a19092000ux1276 | PartNumber: a19092000ux1276
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 59 Newtons And Dynamic Load Rating Of 178 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr63-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR63-2RS (I.D.=3mm, O.D.=6mm, Thickness=2.5mm)
- mr63-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 59 newtons and dynamic load rating of 178 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Tungsten Carbide Rotary Files 1/8" Shank, Single Cut Top Flat Cylinder Rotary Tool 6mm Dia, for Die Grinder Drill Bit Alloy Steel Hard Metal Polishing Model Engineering, 3pcs
Asin: B07NRCX8J3 | Model: a18121200ux0663 | PartNumber: a18121200ux0663
Single Cut Design: Single Groove Rotary Files Are More Suitable For The Object Density Is Relatively High, Such As Alloy Steel, Stainless Steel, Hardened Steel.
Tips: Requirement Of The Carbide Burrs Rotating Speed Is: 4000-50000 Rpm. Always Ensure Your Burrs Shank Is Well Inserted Into Your Collet And Clamped Down Tightly.
Versatile Use: Widely Used For Metalwork, Tool Making, Model Engineering, Wood Carving, Jewelry Making,Welding, Chamfering, Casting, Deburring, Grinding, Sculpting.
Long Working Life: Made Of Heat-Treated Tungsten Carbide That Hardness Can Be Up To Above Hra85, Sharp And Sturdy, Long Service Life.
Features
- Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders
- Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life
- Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel
- Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting
- Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 0.79 x 0.79 inches
See On Amazon
Looking For Something Else?
Search