ALLOYBOLTZ - Compatible with Oldsmobile OLDS 260 307 350 400 403 425 and 455 V-8 Stainless Engine HEX Bolt KIT
Asin: B07PRYP5JQ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Kit Comes With Components For The Intake Manifold- Timing Cover- Water Pump- Oil Pan- Oil Filter Housing- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Crank Pulley – Fan Pulley- Headers- Carb Stud Kit..
Header Bolts (3/8-16 X 1 Allen Bolts) And Our Special Small Od Header Washers Are Included With Each Kit! These Washers Are Designed To Clear Large Tube Headers..
The Carb Stud Kit Fits Carter, Edelbrock, Or Holley Carbs. The Studs Have An Internal Hex Used To Install Them In Your Intake Manifold. If You Are Using A Quadrajet Carb, Just Let Us Know And We Will Include A Mounting Bolt Kit For You!.
This Bolt Kit Fits All 260, 307, 350, 400, 403, 425, And 455 Olds Engines.(Non-Efi). This Is A Complete High Quality Stainless Steel Hex Bolt Kit. The Kit Includes Individually Packaged And Labeled Component Kits For The Following Items:.
Features
- Give Your Olds Engine a new look with our Stainless Steel Hex Bolt kit!! The bolts in this kit are made from 304 stainless steel. SEND A MESSAGE IF YOU HAVE AFTERMARKET COMPONENTS.
- This Bolt Kit Fits All 260, 307, 350, 400, 403, 425, and 455 Olds Engines.(Non-EFI). This is a complete high quality stainless steel hex bolt kit. The kit includes individually packaged and labeled component kits for the following items:
- Kit comes with components for the Intake Manifold- Timing Cover- Water Pump- Oil Pan- Oil Filter Housing- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Crank Pulley Fan Pulley- Headers- Carb Stud Kit.
- The carb stud kit fits Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold. If you are using a Quadrajet carb, just let us know and we will include a mounting bolt kit for you!
- Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These washers are designed to Clear Large Tube Headers.
- See more on Amazon...
Brand: Alloyboltz | Manufacturer: Alloyboltz
See On Amazon Similar To ALLOYBOLTZ Compatible with Oldsmobile OLDS
#1
Marketplace Auto Parts Front Upper and Lower Tubular Control Arm Kit (Bolt-in Replacements) - 4 Piece, Left and Right - Compatible with 1967-1972 Oldsmobile Cutlass Supreme V8
Asin: B08GZXWF61 | Model: W0162-R378955 | PartNumber: W0162-R378955 | Ean: 0195103145892 | UPC: 195103145892
Compatible With Or Fits: 1971 - 1972 Oldsmobile Cutlass Supreme Base 5.7L 5733Cc 350Cu. In. V8 Gas Ohv Naturally Aspirated | 1971 - 1972 Oldsmobile Cutlass Supreme Base 7.5L 455Cu. In. V8 Gas Naturally Aspirated | 1971 - 1972 Oldsmobile Cutlass Supreme Base 7.5L 7456Cc 455Cu. In. V8 Gas Ohv Naturally Aspirated | 1968 - 1972 Oldsmobile Cutlass Supreme Base 5.7L 350Cu. In. V8 Gas Naturally Aspirated.
Front Upper And Lower Control Arm Kit.
Compatible With Or Fits: 1968 - 1972 Oldsmobile Cutlass Supreme Base 5.7L 5737Cc 350Cu. In. V8 Gas Ohv Naturally Aspirated | 1967 Oldsmobile Cutlass Supreme Base 5.4L 330Cu. In. V8 Gas Naturally Aspirated.
(Upper Arms Are 1.125" Od - .125" Wall Tubing), (Lower Arms Are 1.625" Od - .156" Dom Tubing).
Features
- NEW, TUBULAR CONTROL ARMS FOR A BODY GM VEHICLES; 4 Piece Kit Includes; Left and Right, Upper and Lower Heavy Duty Tubular Control Arms that are significantly stronger than stock. Complete bolt-in replacements.
- (Upper arms are 1.125 OD - .125 Wall Tubing), (Lower arms are 1.625 OD - .156 DOM Tubing)
- Compatible with or fits: 1971 - 1972 Oldsmobile Cutlass Supreme Base 5.7L 5733CC 350Cu. In. V8 GAS OHV Naturally Aspirated | 1971 - 1972 Oldsmobile Cutlass Supreme Base 7.5L 455Cu. In. V8 GAS Naturally Aspirated | 1971 - 1972 Oldsmobile Cutlass Supreme Base 7.5L 7456CC 455Cu. In. V8 GAS OHV Naturally Aspirated | 1968 - 1972 Oldsmobile Cutlass Supreme Base 5.7L 350Cu. In. V8 GAS Naturally Aspirated
- Compatible with or fits: 1968 - 1972 Oldsmobile Cutlass Supreme Base 5.7L 5737CC 350Cu. In. V8 GAS OHV Naturally Aspirated | 1967 Oldsmobile Cutlass Supreme Base 5.4L 330Cu. In. V8 GAS Naturally Aspirated
- Front Upper and Lower Control Arm Kit
- See more on Amazon...
Brand: Marketplace Auto Parts | Manufacturer: Marketplace Auto Parts
See On Amazon #2
ALLOYBOLTZ - Compatible with Buick Big Block 455 Engine Bolts Screw KIT Stainless Steel HEX Set
Asin: B0CMYJF55W | Ean: 0662652847800 | UPC: 662652847800
The Kit Includes Individually Packaged And Labeled Component Kits For The Following Items: Intake Manifold (See Note Below)- Timing Cover- Water Pump- Oil Pan- Crank Pulley- Fan Pulley- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers (Allen Bolts) Carb Stud Kit..
The Carb Stud Kit Is Compatible With Carter, Edelbrock, Or Holley Carbs. The Studs Have An Internal Hex Used To Install Them In Your Intake Manifold. If You Are Using A Quadrajet Carb, Just Let Us Know And We Will Include A Mounting Bolt Kit For You!.
Header Bolts (3/8-16 X 1 Allen Bolts) And Our Special Small Od Header Washers Are Included With Each Kit! These Washers Are Designed To Clear Large Tube Headers..
The Intake Manifold Kit Uses 7/16 X 1 1/2 Length Bolts. These Fit Most Stock And Aluminum Intakes. If Your Intake Uses A Different Diameter And Length Like 3/8 X 1 1/4, Let Us Know With Your Payment And We Will Substitute That Length For You. We Send 7/16 X 1 1/2 Standard If We Don't Hear Anything From You At Payment..
This Bolt Kit Fits All 455 Buick Engines (Non-Efi). This Is A High Quality Stainless Steel Hex Bolt Kit..
Features
- Give Your Buick 455 Engine a new look with our Stainless Steel Hex Bolt kit!! The bolts in this kit are made from 304 stainless steel. SEND A MESSAGE IF YOU HAVE AFTERMARKET COMPONENTS.
- This Bolt Kit Fits all 455 Buick Engines (Non-EFI). This is a high quality stainless steel hex bolt kit.
- The kit includes individually packaged and labeled component kits for the following items: Intake Manifold (See Note Below)- Timing Cover- Water Pump- Oil Pan- Crank Pulley- Fan Pulley- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers (Allen Bolts) Carb Stud Kit.
- The intake manifold kit uses 7/16 X 1 1/2 length bolts. These fit most stock and aluminum intakes. If your intake uses a different diameter and length like 3/8 X 1 1/4, let us know with your payment and we will substitute that length for you. WE SEND 7/16 X 1 1/2 STANDARD IF WE DON'T HEAR ANYTHING FROM YOU AT PAYMENT.
- The carb stud kit is compatible with Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold. If you are using a Quadrajet carb, just let us know and we will include a mounting bolt kit for you!
- Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These washers are designed to Clear Large Tube Headers.
- See more on Amazon...
Brand: Alloyboltz | Manufacturer: Alloyboltz
Dimensions: 2.00 x 10.00 x 5.00 inches
See On Amazon
Looking For Something Else?
Search