Krypt Towers SUP Rail Mounted Storage Rack for Boats, Fits Handrails, Stanchions, and Crossbars on Sailboats/Yachts, Clamp 7/8", 1", 1 1/4"
Asin: B07Q8WJSKK | Ean: 0709951506509 | UPC: 709951506509
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Included Is A Rail Mount System That Will Attach To A Boats Handrails, Stanchions, Or Crossbar Railings. The Included 2 Clamps Per Finger Can Swivel 360 Degrees To Attach To Vertical, Angled, And Horizontal Stanchions. The Clamps Can Be Adjusted Vertically Along The Rear Finger With 4 Pre Drilled Holes On The Finger. The Rack Will Fit Almost Any Rail Configuration With The Spaced Pre-Drilled Holes And Swivel 360 Degree Clamps..
Only Fits Round Tubing - Clamp Sizes - 7/8", 1", 1 1/4".
Sup/Kayak Rail Mounted Racks Come With 2 X Padded Rack Fingers With Bungie, 2 X Clamps, And Hardware..
The Rack Is Built To Withstand Salt Or Freshwater Environment And Is Manufactured In Anodized 6061 Aircraft Grade Aluminum. The Fingers Include Eva Foam Lining And Padding To Protect Paddle Boards From Dents And Dings While The Marine Grade Bungie Secures The Board In Place While Underway..
Features
- SUP/Kayak boat storage rack is designed to mount to the rails of a boat.
- The rack is built to withstand salt or freshwater environment and is manufactured in anodized 6061 aircraft grade aluminum. The fingers include EVA Foam lining and padding to protect paddle boards from dents and dings while the marine grade bungie secures the board in place while underway.
- Included is a rail mount system that will attach to a boats handrails, stanchions, or crossbar railings. The included 2 clamps per finger can swivel 360 degrees to attach to vertical, angled, and horizontal stanchions. The clamps can be adjusted vertically along the rear finger with 4 pre drilled holes on the finger. The rack will fit almost any rail configuration with the spaced pre-drilled holes and swivel 360 degree clamps.
- SUP/Kayak Rail Mounted Racks come with 2 x padded rack fingers with bungie, 2 x Clamps, and hardware.
- ONLY FITS ROUND TUBING - Clamp Sizes - 7/8, 1, 1 1/4
- See more on Amazon...
Brand: Krypt Towers | Manufacturer: Krypt Towers
Dimensions: 6.00 x 25.00 x 20.00 Inches | Weight: 10.00 pounds
See On Amazon Similar To Krypt Towers SUP Rail Mounted
#1
Krypt Towers Wakeboard Rack, Polished Aluminum Wakeboarding Tower Holder, Adjustable Angle Base to Level with Boat, Clamp Fits Tubing Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"
Asin: B00CA5UJ6S | Model: BSL-200 | PartNumber: BSL-200 | Ean: 0710928989096 | UPC: 710928989096
Our Swivel Mount Wakeboard Rack Can Be Mounted To Any Tower In Nearly 360 Degrees To Level Out The Board Rack Horizontal With The Boat - This Rack Can Be Mounted On Vertical Or Horizontal Bars At Virtually Any Angle..
Fitment - Will Not Level Out On Reverse Arch/Forward Leaning Towers: (Surfboards Will Not Fit) . Finger Slot/Opening Fits Board Thickness Up To 1.3". Clamp Sizes Included: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2". Clamp Size Calulator Below..
Holds 2 X Wakeboards Soft Rubber Finger Inserts And Bungie Straps For Secure Board Protection - Secures Boards In Place During The Choppy Days At The Lake Or While Traveling Fast Across The Lake.
Wake Board Racks - High Quality Tower Racks Manufactured With Only The Best Materials. Heavy Duty Construction Will Provide Years Of Enjoyment..
Features
- Full size wakeboard Tower Rack with Polished 6061 Aircraft Grade Aluminum, Double Polished to a Mirror Shine. Finger opening is 1.3" to fit nearly all wakeboards.
- Wake Board Racks - High quality tower racks manufactured with only the best materials. Heavy duty construction will provide years of enjoyment.
- Our Swivel mount wakeboard rack can be mounted to any tower in nearly 360 degrees to level out the board rack horizontal with the boat - This rack can be mounted on vertical or horizontal bars at virtually any angle.
- Holds 2 x Wakeboards Soft Rubber Finger Inserts and Bungie Straps for Secure Board Protection - Secures boards in place during the choppy days at the lake or while traveling fast across the Lake
- Fitment - WILL NOT LEVEL OUT ON REVERSE ARCH/FORWARD LEANING TOWERS: (SURFBOARDS WILL NOT FIT) . Finger slot/opening fits board thickness up to 1.3. Clamp Sizes Included: 1 3/4, 1 7/8, 2, 2 1/4, 2 3/8, 2 1/2. CLAMP SIZE CALULATOR BELOW.
- See more on Amazon...
Brand: Krypt Towers | Manufacturer: Krypt Towers
Dimensions: 8.00 x 12.00 x 11.00 inches | Weight: 7.00 Pounds
Warranty: 1 year from manufacturer defect
See On Amazon #2
Thule SUP Taxi XT Surfboard Rack
Asin: B0791YNVXV | Model: 810001 | PartNumber: 810001 | Ean: 0091021169159 | UPC: 091021169159
Exclusive Telescoping Design Delivers A Custom Fit For Boards Up To 34" Wide.
Product Weight: 15 Lbs.
Fits All Thule Rack Systems, Round Bars And Most Factory Racks.
Loading Width: 28-34 Inches.
Heavy-Duty, Steel Reinforced Webbing And Easy-To-Use Locking Cam Provide Unsurpassed Security.
Soft, Weather Resistant Padding Protects Boards In Transit.
Convenient, Tool-Free Mounting.
Dimensions: 24 To 40 X 6.5 X 6 Inches.
Push Button Lock System For Quick And Easy Locking Strap Operation And Security.
Features
- A safe and secure stand up paddle board carrier
- Push button lock system for quick and easy locking strap operation and security
- Exclusive telescoping design delivers a custom fit for boards up to 34 wide
- Convenient, tool-free mounting
- Heavy-duty, steel reinforced webbing and easy-to-use locking cam provide unsurpassed security
- Soft, weather resistant padding protects boards in transit
- Fits all Thule rack systems, round bars and most factory racks
- Loading Width: 28-34 inches
- Dimensions: 24 to 40 x 6.5 x 6 inches
- Product weight: 15 lbs
- See more on Amazon...
First Available: 06/01/2018
Brand: Thule | Manufacturer: Thule, Inc.
Dimensions: 3.94 x 39.37 x 13.98 inches | Weight: 2.20 Pounds
See On Amazon #3
MBB Longboard Bicycle Surfboard Racks, by Moved By Bikes, Compatible with Shortboards, Longboards, and SUP Paddleboards, Quick Release Bars
Asin: B00AA87DO8 | Model: MBBB2S01 | PartNumber: MBBB2S01 | Ean: 0860007940200 | UPC: 860007940200
All Aluminum And Stainless Steel Construction.
The Rack That Does Everything, Carry Your Long And Shortboards With One Rack.
Head Tube, Seatpost, And Rear Rack Mounting Options.
Our Original Design, The Longboard Racks Work Great For Carrying Longboards, Shortboards, And Sups Up To About 25Lbs..
Features
- Quick release bars make for quick and easy removal when not in use, no tools required
- Our original Design, the Longboard Racks work great for carrying longboards, shortboards, and SUPs up to about 25lbs.
- All aluminum and stainless steel construction
- Head tube, seatpost, and rear rack mounting options
- The rack that does everything, carry your long and shortboards with one rack
- See more on Amazon...
Brand: Moved By Bikes | Manufacturer: Moved By Bikes
Dimensions: 3.05 x 17.30 x 11.70 Inches | Weight: 4.84 pounds
Warranty: 1 year
See On Amazon #4
Yes4All Heavy Duty Steel Wall Mount Paddle Board Racks, Surfboard Hanger with Padded Foam, Store & Display Up to 3 Surfboards, Snowboards, Longboards, Black, 34.25" x 5.51" x 3.54"
Asin: B07LBRZ6J3 | Model: Yes4All | PartNumber: Yes4All | Ean: 0817802028510 | UPC: 817802028510
27-Inch Long Removable Arms: The Paddle Board Racks’ 27-Inch Long Arms Are Removable With A Simple Click Of The Push Pin Embedded On The Connector, Providing Generous Space For Board Storage While Also Helping To Save Space When Not In Use.
Angled Arms: Each Rack Arm Forms A Slight Incline Angle With The Vertical Mount, Making Use Of Gravity For Safer Board Storage.
Thick Foam Pad: The Board Rack’S Arms Are Padded With Thick Foam Material Which Protects Stored Boards Against Damage And Scratches As Well As Providing Better Grips, Preventing The Boards From Sliding Off Accidentally.
3-Tier Design: Our Pro-Quality Paddle Board Racks Come Equipped With A Practical, Ergonomic 3-Tier Design To Accommodate Up To 3 Or More Boards Of All Kinds, Whether It’S A Sup, Surfboard Or A Ski Board.
Features
- HEAVY GAUGE STEEL CONSTRUCTION: Made of solid steel with anti-rust black powder coating, Yes4All Wall Mount Paddle Board Rack can hold up to 40lbs with each pair of rack arms and withstand any harsh condition for a long time
- 3-TIER DESIGN: Our pro-quality paddle board racks come equipped with a practical, ergonomic 3-tier design to accommodate up to 3 or more boards of all kinds, whether it s a SUP, surfboard or a ski board
- 27-INCH LONG REMOVABLE ARMS: The paddle board racks 27-inch long arms are removable with a simple click of the push pin embedded on the connector, providing generous space for board storage while also helping to save space when not in use
- THICK FOAM PAD: The board rack s arms are padded with thick foam material which protects stored boards against damage and scratches as well as providing better grips, preventing the boards from sliding off accidentally
- ANGLED ARMS: Each rack arm forms a slight incline angle with the vertical mount, making use of gravity for safer board storage
- See more on Amazon...
Brand: Yes4All | Manufacturer: Yes4All
Dimensions: 34.25 x 3.54 x 5.51 inches | Weight: 15.90 pounds
Warranty: 1-year warranty and 30-day return
See On Amazon #5
FITactic Metal Display Wall Rack Set for SUP board, Surfboard, Wakeboard, Kiteboard, Snowboard, Longboards, Shortboard Storage Management (Green)
Asin: B01K1MKV14 | Model: MSR 001S-G | PartNumber: MSR 001S-G
▼ With A Bigger Inside Width, They Can Accommodate Even Thicker Sup Board With Fins & Paddle. ▼ Mounting Screws Included..
▼ Detachable Extension Tube With Spring Stopper For Easy Installation (Included)..
▼ Metal Tubes Are Made Of Galvanized Steel And Is Powder Coated To Keep From Rusting. Protective Weather Resistant Foam To Keep Your Boards Stay Firm & Safe!.
▼ For Vertical Wall-Mounting Only (Not For Horizontal Ceiling-Mounting). Space Saving! Max. 70Lbs. Size: 18.5" X 10".
Features
- Built specifically for SUP board, Surfboard, Wakeboard, Kiteboard, Snowboard, Longboards, Shortboard Storage
- For VERTICAL wall-mounting only (NOT For horizontal ceiling-mounting). Space saving! MAX. 70LBs. Size: 18.5 x 10
- With a BIGGER inside width, they can accommodate even thicker SUP board with fins & paddle. Mounting screws included.
- Metal tubes are made of galvanized steel and is powder coated to keep from rusting. Protective weather resistant foam to keep your boards stay firm & safe!
- Detachable extension tube with spring stopper for easy installation (included).
- See more on Amazon...
Brand: FITactic | Manufacturer: FITactic
Weight: 3.50 pounds
See On Amazon #6
Krypt Towers Wakeboard Rack, Black Aluminum Wakeboarding Tower Holder, Adjustable Angle Base to Level with Boat, Clamp Fits Tubing Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"
Asin: B07P4DHR91 | Ean: 0709951506981 | UPC: 709951506981
Wakebord Tower Rack - Swivel Mount Wakeboard Rack Can Be Mounted To Any Tower In Nearly 360 Degrees To Level Out The Board Rack Horizontal With The Boat - This Rack Can Be Mounted On Vertical Or Horizontal Bars At Virtually Any Angle..
Wake Board Tower Rack Clamp Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2".
Wakeboarding Rack Holds 2 X Wakeboards Soft Rubber Finger Inserts And Bungie Straps For Secure Board Protection - Securely Holds Wakeboards In Place During Choppy Days At The Lake Or While Traveling Fast Across The Lake..
Wake Board Racks - High Quality Tower Racks Manufactured With Only The Best Materials. Heavy Duty Construction Will Provide Years Of Enjoyment..
Features
- Black Wakeboard Tower Rack with Black Powder Coated 6061 Aircraft Grade Aluminum, Double Polished to a Mirror Shine. -
- Wake Board Racks - High quality tower racks manufactured with only the best materials. Heavy duty construction will provide years of enjoyment.
- Wakebord Tower Rack - Swivel mount wakeboard rack can be mounted to any tower in nearly 360 degrees to level out the board rack horizontal with the boat - This rack can be mounted on vertical or horizontal bars at virtually any angle.
- Wakeboarding Rack Holds 2 x Wakeboards Soft Rubber Finger Inserts and Bungie Straps for Secure Board Protection - Securely Holds wakeboards in place during choppy days at the lake or while traveling fast across the Lake.
- Wake Board Tower Rack Clamp Sizes: 1 3/4, 1 7/8, 2, 2 1/4, 2 3/8, 2 1/2
- See more on Amazon...
Brand: Krypt Towers | Manufacturer: Krypt Towers
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #7
Krypt Towers Wakesurf Rack for Tower, Surfboard Rack for Boat, Holds 2 x Wakesurf Boards, Black Aluminum Wakeboard Rack, Fits Clamp Tubing Sizes-1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"
Asin: B07NXX6MK2 | Ean: 0709951506981, 0709951506967 | UPC: 709951506967, 709951506981
This Surf Tower Rack Has Easy Installation And Attaches To Round Tubing Towers..
Surfboard Rack For Boats With Tubing Clamp Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2".
Secures 2 Surfboards/Wakesurf Boards, Bungie Strap To Hold Boards Secure.
Douoble Wake Surf Rack Finger Opening Is 2.25" And Will Fit Wakesurf Boards Up To 2.25" In Thickness.
Features
- Black Wakesurf Rack For Tower - Black Powder Coated 6061 Aluminum, Rubber bumber finger inserts for board protection.
- Douoble Wake Surf Rack Finger opening is 2.25 and will fit Wakesurf Boards up to 2.25 in thickness
- This Surf Tower Rack has Easy installation and attaches to round tubing towers.
- Secures 2 Surfboards/Wakesurf Boards, Bungie strap to hold boards secure
- Surfboard Rack for Boats with Tubing Clamp Sizes: 1 3/4, 1 7/8, 2, 2 1/4, 2 3/8, 2 1/2
- See more on Amazon...
Brand: Krypt Towers | Manufacturer: Krypt Towers
See On Amazon #8
Onefeng Sports SUP Wall Rack Surfboard Wall Rack SUP Wall Mount - As a Display Background Wall at Home for Paddleboards Shortboards and Longboards (Suitable for SUP)
Asin: B0C5MDCHQP
☀【High Quality Material】Made Of Aluminum Tube Construction With Foam Paddle Cradles. Won’T Damage Your Surfboards.It’S Powder Coated And Rust Resistant..
☀【Size & Capacity】17.9"L X 4.3"W. One Pair(2 Racks) Holds Up To 100 Lbs. Includes Screws And Anchors..
☀【Easy To Install】Make A Small Pencil Mark Where The Center Of The Screw Will Go, And Drill A Hole In The Spot(S) You Marked. Make Sure The Hole You Drill Is Deeper Than The Anchor’S Length.Then Insert The Drywall Anchors Into The Hole.Lastly, Screw The Bolt By Using A Screwdriver..
☀【Not Recommented For Sup】Not Recommend For Paddle Boards Or Sup.Suitable For Surfboards With A Maximum Thickness Of 4.3 Inches.Provide You Exactly The Storage Thickness That Fits Your Space And Storage Needs..
Features
- VERSATILE STORAGE OPTIONS Universal surfboard storage rack Great as a Display background wall at home.Also can store shorts boards, surfboards & long boards.Not recommend for paddle boards OR SUP.
- NOT RECOMMENTED FOR SUP Not recommend for paddle boards OR SUP.Suitable for surfboards with a maximum thickness of 4.3 inches.Provide you exactly the storage thickness that fits your space and storage needs.
- HIGH QUALITY MATERIAL Made of aluminum tube construction with foam paddle cradles. Won t damage your surfboards.It s powder coated and rust resistant.
- EASY TO INSTALL Make a small pencil mark where the center of the screw will go, and drill a hole in the spot(s) you marked. Make sure the hole you drill is deeper than the anchor s length.Then insert the drywall anchors into the hole.Lastly, screw the bolt by using a screwdriver.
- SIZE & CAPACITY 17.9L x 4.3W. One pair(2 racks) Holds up to 100 lbs. Includes screws and anchors.
- See more on Amazon...
Brand: Onefeng Sports | Manufacturer: Ningbo Beilun Onefeng Sports Products CO.,Ltd
Weight: 3.00 pounds
Warranty: One-year warranty
See On Amazon #9
Extreme Max 3006.8474 Vertical Surfboard/SUP Storage Rack - 4 Arm
Asin: B07SVZPQ68 | Model: 3006.8474 | PartNumber: 3006.8474 | Ean: 0811368034862 | UPC: 811368034862
Foam Floor Pad Protects Your Board And The Floor, And Stops The Boards From Slipping.
Powder-Coated Steel Construction Protects Against Rust And Damage.
Arms Attach And Detach With In Seconds With A Push-Pin Connection, Helping Save Space When The Rack Is Not In Use.
Durable Foam Padding Protects Your Boards From Scrapes And Pressure Dings.
Features
- Comfortably stores boards in an easy-access vertical position
- Durable foam padding protects your boards from scrapes and pressure dings
- Foam floor pad protects your board and the floor, and stops the boards from slipping
- Arms attach and detach with in seconds with a push-pin connection, helping save space when the rack is not in use
- Powder-coated steel construction protects against rust and damage
- See more on Amazon...
Brand: Extreme Max | Manufacturer: Extreme Max
Dimensions: 3.25 x 32.00 x 19.00 Inches | Weight: 8.80 pounds
Warranty: 2-year warranty
See On Amazon #10
Krypt Towers Wakesurf Rack for Tower, Surfboard Rack for Boat, Holds 2 x Wakesurf Boards, Polished Aluminum Wakeboard Rack, Fits Clamp Tubing Sizes-1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"
Asin: B00CA5U3E6 | Ean: 0710928989119 | UPC: 710928989119
Wakesurf Tower Rack - Easy Installation And Attaches To Round Tubing Towers. Levels Out With Boat During Installation..
Surfboard Rack For Boat Tower - Clamp Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2".
Wake Surf Rack - Secures 2 Surfboards/Wakesurf Boards With Bungie Strap To Hold Boards Secure.
Double Surfboard Rack - Holds 2 X Surfboards With Finger Opening Of 2.25", Fits Surfboards Up To 2.25" In Thickness..
Features
- Wakesurf Rack - Solid polished aluminum double wakesurf rack with rubber bumper inserts for board protection.
- Double Surfboard Rack - Holds 2 x surfboards with finger opening of 2.25, fits surfboards up to 2.25 in thickness.
- Wakesurf Tower Rack - Easy installation and attaches to round tubing towers. Levels out with boat during installation.
- Wake Surf Rack - Secures 2 Surfboards/Wakesurf Boards with Bungie strap to hold boards secure
- Surfboard Rack For Boat Tower - Clamp Sizes: 1 3/4, 1 7/8, 2, 2 1/4, 2 3/8, 2 1/2
- See more on Amazon...
Brand: Krypt Towers | Manufacturer: Krypt Towers
Dimensions: 11.00 x 17.00 x 12.00 Inches
See On Amazon #11
Rad Rail Skateboard Rail Grind Ramp Heavy Duty 1.75 Square Flat Bar 3 Height Adjust 5 Foot Long Driveway, Street, Ramp or Skatepark - Snowboard, Scooter Etc. No Tools Required, Red/Black
Asin: B09BBPXP7Y | Model: Rad Rail Skateboard Rail Grind Ramp – | PartNumber: Rad Rail Skateboard Rail Grind Ramp – | Ean: 0600310785989 | UPC: 600310785989
Whats Included – 60 Inch Top Rail Consisting Of (2) 30 Inch Pieces, Square Locking Bar To Connect The Tubes Together, 2 Support Legs, 2 Support Feet With Rubber Padding To Stop Sliding On Surface..
Full Satisfaction – Designed By Action Sports Guys For Shredders. We Know You Will Be Satisfied. If Not, Just Return Within 30 Days For A Full Refund..
Many Uses - Can Be Used For Skateboards, Snowboards, Scooters And Inline Skates. Also, Use Precaution As Sliding On Rails Can Be Dangerous. Always Wear A Helmet, Elbow Pads And Knee Pads..
Adjustable Height – The Rad Rail Can Be Adjusted Up And Down To 3 Heights Without Tools. Adjust Top Of Rail From 7.5” To 8.5” And 10”. You Can Also Disassemble The Rail Quickly In Half With Push Buttons No Tools Required. Can Easily Be Transported In Car. No Tools Required..
Features
- STEEL DESIGN Strong and durable square tubed powder coated steel. Square makes the rail stronger and more enjoyable to slide across. Top rail is 2 pieces connected by heavy duty square steel connector. Rubber feet to prevent sliding when riding.
- ADJUSTABLE HEIGHT The Rad rail can be adjusted up and down to 3 heights without tools. Adjust top of rail from 7.5 to 8.5 and 10 . You can also disassemble the rail quickly in half with push buttons no tools required. Can easily be transported in car. No tools required.
- WHATS INCLUDED 60 Inch Top rail consisting of (2) 30 inch pieces, Square locking bar to connect the tubes together, 2 support legs, 2 support feet with rubber padding to stop sliding on surface.
- MANY USES - Can be used for skateboards, snowboards, scooters and inline skates. Also, use precaution as sliding on rails can be dangerous. Always wear a helmet, elbow pads and knee pads.
- FULL SATISFACTION Designed by action sports guys for shredders. We know you will be satisfied. If not, just return within 30 days for a full refund.
- See more on Amazon...
Brand: EasyGo Product | Manufacturer: EasyGo Products
Dimensions: 8.50 x 60.00 x 12.00 inches | Weight: 15.00 Pounds
Warranty: 30 days for a full refund
See On Amazon #12
Sparehand PS-42 SUP Wall Mount Rack for 2 SUP - Wall Hanger Rack for Garage Storage - Storage Rack Shelf for Surfboards or SUP Paddle Boards
Asin: B00NDJWFSU | Model: PS-42L | PartNumber: PS-42L | Ean: 0832085002835 | UPC: 832085002835
Padded Garage Storage Rack: Thickly Padded Arms Offer Superior Protection For Your Surfboards, Minimizing The Risk Of Scratches, Dings, And Other Damage During Storage.
Complete With All Necessary Hardware And Mounting Instructions For Easy Installation, Ensuring A Hassle-Free Setup Process And Allowing You To Start Using The Rack Right Away.
Multipurpose Design: Not Just Suitable For Storing Your Surfboards But Also Makes A Great Skateboard Wall Mount, Ski Rack Or Snowboard Wall Mount - Maximizing Its Utility And Versatility.
Hassle-Free Surfboard Mount: Easy Removal Of Arms Using A Simple Push Pin Mechanism, Allowing For Hassle-Free Adjustments And Customization According To Your Storage Needs.
Features
- Versatile Design: This surfboard rack is designed to comfortably accommodate shortboards and longboards, providing a convenient storage solution and garage organization for various types of surfboards
- Hassle-free Surfboard Mount: Easy removal of arms using a simple push pin mechanism, allowing for hassle-free adjustments and customization according to your storage needs
- Padded Garage Storage Rack: Thickly padded arms offer superior protection for your surfboards, minimizing the risk of scratches, dings, and other damage during storage
- Multipurpose Design: Not just suitable for storing your surfboards but also makes a great skateboard wall mount, ski rack or snowboard wall mount - maximizing its utility and versatility
- Complete with all necessary hardware and mounting instructions for easy installation, ensuring a hassle-free setup process and allowing you to start using the rack right away
- See more on Amazon...
Brand: SPAREHAND | Manufacturer: Stoneman
Dimensions: 21.00 x 27.50 x 2.00 inches | Weight: 10.00 pounds
See On Amazon #13
Krypt Towers Ultimate Board Sports Wall Mount Storage Rack, Heavy Duty Steel Board Stand, Rubber Padded Fingers, Store & Display Up to 4 Surfboards, Wakeboards, Snowboards, Skis, E-Foil & More
Asin: B07484XXP3 | Model: HDWall | PartNumber: HDWall | Ean: 0709951506080 | UPC: 709951506080
Mounting Our Robust Metal Rack Is A Breeze, Since You’Ll Find Everything You Need In The Package! And The Best Part? You Can Easily Adjust Its Width And Height To Fit Almost Any Type Of Board, While The Padded Rubber Fingers Will Eliminate Scratches And Damage!.
Krypt Towers Fully Adjustable Metal Board Rack Will Pass The Test Of Time And Protect All Your Boards!.
Looking For A Practical And Reliable Way To Store And Display Your Surfboards Or Skateboards? The Krypt Towers Univerasl Wall Mount Board Storage Rack Is Here To Help You Store All Your Extreme Sports Boards Like Never Before!.
Now You Can Safely Store And Proudly Display Up To 4 Of Your Favorite Surfboards, Skateboards, Water Skis, Sandboards, Snowboards, Wakeboards, Kneeboards Or E-Foils ! Add A Unique Touch Of Surfing Style To Your Bedroom, Living Room, Garage Or Game Room Now!.
Features
- If your skateboards, E-Foils or surfboards are lying around in your garage or storage room, they can be easily damaged. But with the Krypt Towers wall mounted storage rack you can protect them and keep them in perfect condition!
- Now you can safely store and proudly display up to 4 of your favorite surfboards, skateboards, water skis, sandboards, snowboards, wakeboards, kneeboards or E-Foils ! Add a unique touch of surfing style to your bedroom, living room, garage or game room now!
- Mounting our robust metal rack is a breeze, since you ll find everything you need in the package! And the best part? You can easily adjust its width and height to fit almost any type of board, while the padded rubber fingers will eliminate scratches and damage!
- Looking for a practical and reliable way to store and display your surfboards or skateboards? The Krypt Towers univerasl wall mount board storage rack is here to help you store all your extreme sports boards like never before!
- Krypt Towers fully adjustable metal board rack will pass the test of time and protect all your boards!
- See more on Amazon...
Brand: Krypt Towers | Manufacturer: Krypt Wakeboard Towers
Dimensions: 40.00 x 10.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon #14
SurfStow Transport SUPRax 50050-2, Stand-Up Paddleboard Rack, Boat Mount, Single Board System
Asin: B00U23CI6E | Model: 50050-2 | PartNumber: 50050-2 | Ean: 0814154015540, 4121344622577 | UPC: 814154015540
061 Aluminum Alloy, Polished, Anodized.
Heavy Duty Shock Cords Keep Boards In Place.
Heat Press, Die Cut, Eva Protective Foam.
Unique Rotating Clamp Allows For Mounting On Angled Stanchions.
Features
- Secure your board to your boat fits 7/8 inch, 1 inch and 1-1/4 inch
- Unique rotating clamp allows for mounting on angled stanchions
- 061 aluminum alloy, polished, anodized
- Heat press, die cut, EVA protective foam
- Heavy duty shock cords keep boards in place
- See more on Amazon...
Brand: SurfStow | Manufacturer: Waterbrands
Dimensions: 11.00 x 26.00 x 4.00 Inches | Weight: 10.70 pounds
Warranty: Warranty
See On Amazon #15
FITactic Metal Display Wall Rack Set Ultimate Storage for SUP Boards, Surfboards, Wakeboards, Kiteboards, Snowboards, Longboards, and Shortboards (Black)
Asin: B0BV27MZ3N | Model: MSR 002-B | PartNumber: MSR 002-B
▼ Uncompromising Durability: Crafted From Galvanized Steel With Rust-Resistant Powder Coating. Weather-Resistant Foam Provides Ultimate Board Protection..
▼ Please Note: Elevate Your Storage Vertically (Not Suitable For Horizontal Ceiling-Mounting). Embrace The Future Of Board Organization!.
▼ Extra Convenience: Detachable Extension Tube With Spring Stopper Included For Effortless Assembly..
▼ Tailored To Perfection: Accommodates Thicker Sup Boards With Fins & Paddles. Effortless Setup With Included Mounting Screws..
Features
- Unleash Your Space: Elevate with Vertical Board Storage! The Ultimate Wall-Mount Rack for SUP, Surf, Wake, Kite, Snowboards, Longboards & Shortboards - Redefine Style and Functionality. Supports Up to 70LBs. Size: 18.5" x 10".
- Tailored to Perfection: Accommodates Thicker SUP Boards with Fins & Paddles. Effortless Setup with Included Mounting Screws.
- Uncompromising Durability: Crafted from Galvanized Steel with Rust-Resistant Powder Coating. Weather-Resistant Foam Provides Ultimate Board Protection.
- Extra Convenience: Detachable Extension Tube with Spring Stopper Included for Effortless Assembly.
- Please Note: Elevate Your Storage Vertically (Not Suitable for Horizontal Ceiling-Mounting). Embrace the Future of Board Organization!
- See more on Amazon...
Brand: FITactic | Manufacturer: FITactic
Dimensions: 3.00 x 6.00 x 4.00 Inches
Warranty: 1 year
See On Amazon #16
Yaegoo Surfboard Bike Rack Wakeboard Bicycle Surfing Carrier Mount
Asin: B088BDMXC6 | Model: SP-0018 | PartNumber: SP-0018 | Ean: 0609832279686 | UPC: 609832279686
Clever Design Prevents Your Bike And Board From Rubbing.
Adjusted To Fit Most Surfboards.
Fit Most Bicycles Models.
Fit Surfboards Up To 8 Inch.
Features
- Can mount to seat posts 25mm to 32mm
- Fit surfboards up to 8 Inch
- Clever design prevents your bike and board from rubbing
- Fit most bicycles models
- Adjusted to fit most surfboards
- See more on Amazon...
Brand: Yaegoo | Manufacturer: Duobang Fitness
See On Amazon #17
StoreYourBoard Standup Paddleboard and Surfboard Storage Rack, 2 SUP Adjustable Wall Mount System, Heavy Duty Holds 200 lbs
Asin: B0C87K67BF | Ean: 0850047540171 | UPC: 850047540171
Heavy Duty: Solid Steel Frame Supports Up To 100 Lbs Per Level, Up To 200 Lbs Total. Durable Foam Padding Gently Holds Boards In Place Without Scratching..
Designed In The Usa: Proudly Engineered By Storeyourboard In Troy, Va. Built To Organize Your Boards And Built To Last!.
Easy To Install: Inlcudes Quality Wall Mounting Hardware For Maximum Strength. The Distance Between Each Side Can Be Adjusted To Fit Your Wall Stud Spacing..
Adjustable: Each Level Of Board Storage Can Be Set To Fit The Size Of Your Boards Or Fins. Simply Insert The Gated Pins To Secure Each Storage Attachment For Quick Adjustments..
Features
- SUP AND SURFBOARD STORAGE: The Indoor G-System SUP and Surfboard Wall Rack holds up to 2 paddleboards or multiple surfboards in your home, garage, or board shop!
- ADJUSTABLE: Each level of board storage can be set to fit the size of your boards or fins. Simply insert the gated pins to secure each storage attachment for quick adjustments.
- HEAVY DUTY: Solid steel frame supports up to 100 lbs per level, up to 200 lbs total. Durable foam padding gently holds boards in place without scratching.
- EASY TO INSTALL: Inlcudes quality wall mounting hardware for maximum strength. The distance between each side can be adjusted to fit your wall stud spacing.
- DESIGNED IN THE USA: Proudly engineered by StoreYourBoard in Troy, VA. Built to organize your boards and built to last!
- See more on Amazon...
Brand: StoreYourBoard | Manufacturer: StoreYourBoard
Dimensions: 30.00 x 26.50 x 2.00 Inches | Weight: 12.00 pounds
See On Amazon #18
Amarine Made Heavy Duty Single Kneeboard and Single Wakeboard Combo Tower Rack for Clamped Tube Size: 2",2-1/4", 2-1/2"
Asin: B06ZZLLCD4 | Model: ZJ-HSJ-001 | PartNumber: ZJ-HSJ-001 | Ean: 0614019656594 | UPC: 614019656594
Fits Both Vertical And Horizontal Tower Bars At Virtually Any Angle Bungee Cord For Secure Board Fit. Design Of Intermediate Approximate Bearing Make The Folks Be Able Adjusted At Any Angle..
Special Shock Cord Design Hook Makes It Simple To Grab Your Board When It's Your Turn To Ride..
Rubber Inserts For Secure Tight Board Protection Secures 3 Boards ; He Rubber Lining Inside The Billet Forks Will Keep The Boards Secure And Scratch Free..
Solid Billet Aluminum Construction With Molded Injection Polycarbonate Forks, Swivel Mount That Can Be Adjusted Nearly 360 Degrees.
Features
- Tower Clamped Size Available: 2",2-1/4", 2-1/2" ,with 3 different rubber spacer.2.5inch Clamp 2.25inch rubber insert 2inch rubber insert
- Solid billet aluminum construction with molded injection polycarbonate forks, Swivel mount that can be adjusted nearly 360 degrees
- Fits both vertical and horizontal tower bars at virtually any angle Bungee cord for secure board fit. Design of Intermediate Approximate Bearing make the folks be able adjusted at any angle.
- Rubber inserts for secure tight board protection Secures 3 boards ; he rubber lining inside the billet forks will keep the boards secure and scratch free.
- Special shock cord design hook makes it simple to grab your board when it's your turn to ride.
- See more on Amazon...
Brand: Amarine Made | Manufacturer: Alfa Marine (shanghai) Co.,Ltd
See On Amazon #19
Monster Tower Wakeboard/Surfboard Combo Rack - Quick Release - with Universal Inserts - Brushed and Anodized
Asin: B00ZJ11DUQ | Model: SWR | PartNumber: SWR
High-Quality Construction – Constructed With Machined 6063 Billet Aluminum For Lightweight Durability And Bright-Dipped Anodized For A Corrosion Resistant Finish. 304 Stainless Steel Fasteners Instill Strength At Each Joint..
Quick Release – A Cam Lever Mechanism Allows You To Easily Remove Your Racks, Without Tools, When Trailering, For Security Or When Approaching A Tight Slip..
Wakeboard Protection – Epdm Rubber Bumpers On The Interior Of The Fork Tongs Protect The Finish Of Your Board. Retractable Semi-Circle Discs Modulate A Quiet Ride For Smaller Boards. The Uv-Resistant Elastic Shock Cord Wraps Your Wakeboards And Rack As One..
Universal Fit –The Larger Fork Is 2 ¾” Wide And The Smaller Fork Is 1 ¼” Wide, Both Have Adjustable Widths. The Wakeboard Mount Fits Any Tower That’S 1-5/8” To 2-1/2” In Diameter Using Universal Plastic Inserts. Four-Point Angle Indexing And 360-Degree Rotation Keep Your Wakeboards Parallel To The Water..
Features
- DUAL BOARD STORAGE & SAFETY Provide greater safety and space on deck by storing your wakeboard and surfboard on the overhead wake tower. Direct water away from the boats interior as your boards dry.
- UNIVERSAL FIT The larger fork is 2 wide and the smaller fork is 1 wide, both have adjustable widths. The wakeboard mount fits any tower that s 1-5/8 to 2-1/2 in diameter using universal plastic inserts. Four-point angle indexing and 360-degree rotation keep your wakeboards parallel to the water.
- HIGH-QUALITY CONSTRUCTION Constructed with machined 6063 billet aluminum for lightweight durability and bright-dipped anodized for a corrosion resistant finish. 304 Stainless steel fasteners instill strength at each joint.
- WAKEBOARD PROTECTION EPDM rubber bumpers on the interior of the fork tongs protect the finish of your board. Retractable semi-circle discs modulate a quiet ride for smaller boards. The UV-resistant elastic shock cord wraps your wakeboards and rack as one.
- QUICK RELEASE A cam lever mechanism allows you to easily remove your racks, without tools, when trailering, for security or when approaching a tight slip.
- See more on Amazon...
Brand: Monster Tower | Manufacturer: Monster Tower
Warranty: This Monster Tower® Product Limited Warranty applies to manufacturer defects to Monster Tower®. Monster Tower® warrants to the original purchaser of the Product that the Product will be free from defects in materials and workmanship for a period of (5) years from the date of original purchase (the “Warranty Period”). If the Product fails to conform to the Monster Tower® Product Limited Warranty during the Warranty Period, Monster Tower® will, at its sole discretion, either (a) repair or replace any defective Product; or (b) accept the return of the Product and refund the money paid by purchaser for the Product. This is your sole and exclusive remedy for breach of this warranty. Any Product that has either been repaired or replaced under this Monster Tower® Product Limited Warranty will have warranty coverage for the longer of (90) days or the remaining Warranty Period.
See On Amazon #20
Krypt Towers Origin OWT Wakeboard Tower Racks for Boat, 6061 Aluminum Tines, Kneeboard, Ski, Wakesurf, Sizes 1 3/4, 1 7/8, 2, 2 1/4, 2 3/8, 2 1/2, Polished or Black (Wakeboard Rack Polished)
Asin: B09WB21Y6N | Ean: 0643934892114 | UPC: 643934892114
Water Ski Rack - 2 X Board Rack Holders. Organize Your Boat For More Room, And Free Up Space In Your Ski Locker.
Surfboard - Tower Rack Clamps - Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2".
Wakeboard Racks For Boats - Universal Racks To Fit Round Tubing Towers, And Adjustable Angles To Level Out With Boat.
Kneeboard Rack - Rack Models To Fit Specific Types Of Boards/Skis.
Features
- Wakeboard Rack - Reborn Tower Racks Fit Wakesurfs, Surfboards, Wakeboards, Kneeboards, and Slalom Skis
- Kneeboard Rack - Rack Models to Fit Specific Types of Boards/Skis
- Water Ski Rack - 2 x Board Rack Holders. Organize Your Boat for More Room, and Free Up Space in Your Ski Locker
- Wakeboard Racks For Boats - Universal Racks To Fit Round Tubing Towers, and Adjustable Angles to Level Out with Boat
- Surfboard - Tower Rack Clamps - Sizes: 1 3/4, 1 7/8, 2, 2 1/4, 2 3/8, 2 1/2
- See more on Amazon...
Brand: Krypt Towers | Manufacturer: Krypt Towers
See On Amazon
Looking For Something Else?
Search