Smatree Portable Osmo Pocket 2 PowerStick(PowerBank) Compatible for DJI Osmo Pocket 2/ Pocket 1, Handheld Smartphone Holder Mount Pocket Bracket Set with Tripod for Osmo Pocket
Asin: B07QV5KK6R | Model: DP20 DH7 | PartNumber: DP20 DH7
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High-Speed Charging : 5V/2A Type-C Output Port For Osmo Pocket Or Smartphone .Fully Charging The Osmo Pocket Need About 90 Mins ,Shorter Than Original Charging Case .Fully Charges Itself About 4 Hours..
Note:1.The Knob Is Connected To The Smatree Charging Stick And Cannot Be Reomved. Besides, There Is No Need To Remove The Knob, For You Can Tighten Or Loosen The Holder For Osmo Pocket & Phone/ Charing Base To The Left/Right. 2.If You Want To Change The Charging Base To The Phone/Osmo Pocket Holder, All You Need To Do Is To Loosen The Charging Base By Turning The Knob(Instead Of Taking It Off) To The Right, And Then Insert The Holder And Tighten It To The Left..
Unique Design : Tripod Part Made Of Aluminum Alloy,You Could Choose Any Angle Or Situation For Footage And Video Vlog. The Powerstick Built-In Safety System Fully Protects The Charger From Short Circuit, Over-Current ,Low- Voltage And Overheat ..
Large Capacity :Extension Rod Charging Stick Built-In Rechargeable 5000Mah Battery Supply, It Can Charge About 2 Times For Dji Osmo Pocket 2. Efficiently Extend Your Shooting Time.（Please Fully Insert The Pocket / Pocket 2 Into The Charger Base When Charging.）.
Features
- There are two combinations: Combination 1 - PowerStick + Convertible charging base for pocket 1/2; Combination 2 - PowerStick + Convertible knob + OSMO Pocket phone holder set for pocket 1/2 and phone.
- Large Capacity :Extension Rod Charging Stick Built-in rechargeable 5000mAh battery supply, It can charge about 2 times for DJI OSMO Pocket 2. efficiently extend your shooting time. Please fully insert the Pocket / Pocket 2 into the charger base when charging.
- High-Speed Charging : 5V/2A Type-C output port for OSMO Pocket or Smartphone .Fully charging the OSMO Pocket need about 90 mins ,Shorter than original charging case .Fully charges itself about 4 hours.
- Unique Design : Tripod part made of Aluminum alloy,you could choose any angle or situation for footage and video vlog. The PowerStick built-in safety system fully protects the charger from short circuit, over-current ,Low- voltage and overheat .
- NOTE:1.The knob is connected to the smatree charging stick and cannot be reomved. Besides, there is no need to remove the knob, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the left/right. 2.If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knob(instead of taking it off) to the right, and then insert the holder and tighten it to the left.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 1.27 Pounds
See On Amazon Similar To Smatree Portable Osmo Pocket 2
#1
Smatree Hard Carrying Case Compatible with DJI Osmo Pocket 2/DJI Osmo Pocket (XS)
Asin: B07MYW76HL | Model: D60 | PartNumber: D60
With Comfortable Hand Strap For Easy Carrying. The Hand Strap Can Be Easily Attached To A Belt Or Large Bag..
We Offer 100% Money Back Or Replacement Guarantee If There Is Any Quality Problem..
Mesh Pocket With A Zipper Enlarges The Storage Space For Cables Or Small Other Accessories And Keep Them In Good Condition..
Nice Shaped Compartments Fit For Osmo Pocket, It Can Holds 1 X Osmo Pocket,4 X Neutral Density Filters,2 X Sd Cards,2 X Smartphone Adapter(Refer To Pictures)..
Features
- Size: Small, Dimensions: 7.6" x3.5" x2.8" compact and easy to store in backpacks or carry-on luggage; recommend for traveling and home storage.
- Nice shaped compartments fit for osmo pocket, it can holds 1 x osmo pocket,4 x Neutral density filters,2 x SD Cards,2 x Smartphone Adapter(Refer to pictures).
- With comfortable hand strap for easy carrying. The hand strap can be easily attached to a belt or large bag.
- Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
- We offer 100% money back or replacement guarantee if there is any quality problem.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 0.59 x 7.48 x 3.15 Inches
See On Amazon #2
Smatree Portable Osmo Pocket 2 PowerStick(Power Bank) Compatible for DJI Osmo Pocket 2 / DJI Osmo Pocket 1, Handheld Smartphone Holder Mount Bracket for Osmo Pocket Camera
Asin: B07QX492BL | Model: DP20 DH5 | PartNumber: DP20 DH5
High-Speed Charging : 5V/2A Type-C Output Port For Osmo Pocket Or Smartphone .Fully Charging The Osmo Pocket Need About 90 Mins ,Shorter Than Original Charging Case .Fully Charges Itself About 4 Hours (Not Use The Osmo Pocket )..
Note:1.The Knob Is Connected To The Smatree Charging Stick And Cannot Be Reomved. Besides, There Is No Need To Remove The Knob, For You Can Tighten Or Loosen The Holder For Osmo Pocket & Phone/ Charing Base To The Left/Right. 2.If You Want To Change The Charging Base To The Phone/Osmo Pocket Holder, All You Need To Do Is To Loosen The Charging Base By Turning The Knob(Instead Of Taking It Off) To The Right, And Then Insert The Holder And Tighten It To The Left..
Durable Material: 180Mm Soft Silicone Rubber Hand Grip With 1/4 Standard Screw Port At The Bottom Allows Universal Tripod To Be Attached. The Powerstick Built-In Safety System Fully Protects The Charger From Short Circuit, Over-Current ,Low- Voltage And Overheat.（Non-Stretchable）.
Large Capacity:Built-In Rechargeable 5000Mah Battery Supply, It Can Charge About 2 Times For Dji Osmo Pocket. Efficiently Extend Your Shooting Time.（Please Fully Insert The Pocket / Pocket 2 Into The Charger Base When Charging.）.
Features
- There are two combinations: Combination 1 - PowerStick + Convertible charging base for pocket 1/2; Combination 2 - PowerStick + Convertible knob + OSMO Pocket phone holder set for pocket 1/2 and phone.
- Large Capacity:Built-in rechargeable 5000mAh battery supply, It can charge about 2 times for DJI OSMO Pocket. efficiently extend your shooting time. Please fully insert the Pocket / Pocket 2 into the charger base when charging.
- High-Speed Charging : 5V/2A Type-C output port for OSMO Pocket or Smartphone .Fully charging the OSMO Pocket need about 90 mins ,Shorter than original charging case .Fully charges itself about 4 hours (not use the OSMO Pocket ).
- Durable Material: 180mm Soft Silicone rubber hand grip with 1/4 Standard Screw port at the bottom allows universal tripod to be attached. The PowerStick built-in safety system fully protects the charger from short circuit, over-current ,Low- voltage and overheat. Non-stretchable
- NOTE:1.The knob is connected to the smatree charging stick and cannot be reomved. Besides, there is no need to remove the knob, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the left/right. 2.If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knob(instead of taking it off) to the right, and then insert the holder and tighten it to the left.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 0.84 pounds
See On Amazon #3
Smatree Telescoping Selfie Stick with Tripod Stand Compatible for GoPro Hero 11/10/9/8/7/6/5/4/3+/3/Session/GOPRO Hero (2018),Insta360,DJI OSMO Action,Ricoh Theta S/V,Compact Cameras and Cell Phones
Asin: B071KKGFHW | Model: Smapole Q3S | PartNumber: Smapole Q3S
Selfie Stick Tripod Allows Quick Length Adjustments From 11.8″To 36.6″. Simply Twist Counter Clockwise To Release, Choose Your Desired Length, And Twist Clockwise To Lock..
The Combination Of Camera Selfie Stick + Tripod Stand Enables You To Record Photo And Video For Hours With Minimum Effort. This Professional Design Bring You A Relaxed Shooting Environment..
Universal Stick Tripod For Any Monopod With 1/4" Screw Port At The Bottom To Stand Alone. Durable And Sturdy, Holds Monopod On Top Securely..
Smapole Q3s Is Made Of High Quality Aluminum For Durable And Stable Use. Slip Resistant Rubber And Wrist Strap Around The Selfie Stick, Prevent Unexpected Falling Off, Your Camera/Cell Phone Will Be Well Protected..
Features
- Flexible ball head of Smatree tripod stand provides 360 degree rotation angle for your camera and cell phone to get different best shooting position. Fits for Insta360 X3, GoPro Hero 11/10/9/8/7/6/5/4/3+/3/2/1/Session Cameras / for Ricoh Theta S, M15 Cameras/ Compact Cameras(1/4" thread) / Cell Phones(56mm-80mm).
- SmaPole Q3S is made of high quality aluminum for durable and stable use. Slip resistant rubber and wrist strap around the selfie stick, prevent unexpected falling off, your camera/cell phone will be well protected.
- Selfie stick tripod allows quick length adjustments from 11.8 to 36.6 . Simply twist counter clockwise to release, choose your desired length, and twist clockwise to lock.
- Universal stick tripod for any monopod with 1/4 screw port at the bottom to stand alone. Durable and sturdy, holds monopod on top securely.
- The combination of camera selfie stick + tripod stand enables you to record photo and video for hours with minimum effort. This professional design bring you a relaxed shooting environment.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 1.01 pounds
See On Amazon #4
Smatree OSMO Pocket 2 Phone Holder Set Expansion Accessories with 1/4" Thread Screw and Tripod Compatible with DJI OSMO Pocket 2/ OSMO Pocket and Smartphone
Asin: B07RFRYQD8 | Model: Smatree-SA528 | PartNumber: Smatree-SA528
There Are Soft Rubber Inside Of The Brackets For The Smartphone And Osmo Pocket, Which Are More Stable And Can Protect Your Smartphone And Osmo Pocket From Falling Down And Scratching..
The Pocket Holder Kit Has Good Design, High Quality And Adjustable Size For Osmo Pocket And Any Of The Smart Phones. It Can Make Your Life More Beautiful Together With Your Smart Osmo Pocket..
Osmo Pocket Mobile Bracket Set Can Effectively Fix The Osmo Pocket With A Mobile Phone To Avoid Damaging The Data Plug..
The Pocket Holder Kit Is Comming With The Aluminum Tripod , Which Can Let You Choose Any Angle Or Situation For Footage And Video Vlog..
Features
- The OSMO POCKET HOLDER set can connecting your smart phone, OSMO Pocket 2 and OSMO POCKET, making your footage and video vlog more easier and proffessional.
- The POCKET HOLDER KIT is comming with the aluminum tripod , which can let you choose any angle or situation for footage and video vlog.
- There are soft rubber inside of the brackets for the smartphone and OSMO Pocket, which are more stable and can protect your smartphone and OSMO Pocket from falling down and scratching.
- OSMO POCKET mobile bracket set can effectively fix the OSMO Pocket with a mobile phone to avoid damaging the data plug.
- The POCKET HOLDER KIT has good design, high quality and adjustable size for OSMO POCKET and any of the smart phones. It can make your life more beautiful together with your smart OSMO POCKET.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
See On Amazon #5
Smatree Baseball Hat with Quick Release Buckle Mount Compatible for GoPro 5 Session Hero 12/11/10/9/8/7/6/5/4/3 Plus/3/2/1/DJI OSMO Action Cameras, Wool Material (L 58-60cm) Black
Asin: B019Q8DH5Q | Model: COMINU031080 | PartNumber: COMINU031080
Fit For Fishing, Hiking, Biking, Golfing, Attending Parties, Concert And Watching Games Etc..
Compatible For Hero 12/11/10/ 9/8/7/6/5/4/3 Plus/3/2/1/Dji Osmo Action Cameras (L 58-60Cm).
Soft And Lightweight, Have No Obvious Sense Of Heaviness..
Smatree Hat Keeps Your Camera Shooting Videos With A Different View Angle Conveniently..
Free Your Hand, Convenient To Shoot Videos Without Hand-Hold..
Features
- Wool Material Selected comfortable wool material is made, a littal expensive than other hats, but worth it. Soft and lightweight.
- Free your hand, convenient to shoot videos without hand-hold.
- Fit for Fishing, Hiking, Biking, Golfing, Attending Parties, Concert and Watching Games etc.
- Smatree Hat keeps your Camera shooting videos with a different view angle conveniently.
- Compatible for Hero 12/11/10/ 9/8/7/6/5/4/3 Plus/3/2/1/DJI OSMO Action Cameras (L 58-60cm)
- Soft and lightweight, have no obvious sense of heaviness.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 0.14 Pounds
See On Amazon #6
Smatree OSMO Pocket 2 Phone Holder Set Expansion Accessories with 1/4 Thread Screw Compatible with DJI OSMO Pocket 2/ DJI OSMO Pocket and Smartphone
Asin: B07QTZ33NR | Model: Smatree-SA516 | PartNumber: Smatree-SA516
There Are Soft Rubber Inside Of The Brackets For The Smartphone And Osmo Pocket, Which Are More Stable And Can Protect Your Smartphone And Osmo Pocket From Falling Down And Scratching..
The Pocket Holder Kit Has Good Design, High Quality And Adjustable Size For Osmo Pocket And Any Of The Smart Phones. It Can Make Your Life More Beautiful Together With Your Smart Osmo Pocket. Note: The Maximum Placement Thickness Of Our Phone Holder Is 0.63Inch. If The Width Of Your Phone Case Plus The Phone Exceeds 0.63Inch, It Cannot Be Placed On The Phone Holder..
Osmo Pocket Mobile Bracket Set Can Effectively Fix The Osmo Pocket With A Mobile Phone To Avoid Damaging The Data Plug..
The Pocket Holder Kit Is Comming With The 1/4" Thread Screw, Pefect Fit For Universal Tripod.
Features
- The OSMO POCKET HOLDER set can connecting your smart phone, DJI OSMO Pocket 2 and OSMO POCKET, making your footage and video vlog more easier and proffessional.
- The POCKET HOLDER KIT is comming with the 1/4 Thread Screw, Pefect fit for Universal Tripod
- There are soft rubber inside of the brackets for the smartphone and OSMO Pocket, which are more stable and can protect your smartphone and OSMO Pocket from falling down and scratching.
- OSMO POCKET mobile bracket set can effectively fix the OSMO Pocket with a mobile phone to avoid damaging the data plug.
- The POCKET HOLDER KIT has good design, high quality and adjustable size for OSMO POCKET and any of the smart phones. It can make your life more beautiful together with your smart OSMO POCKET. Note: the maximum placement thickness of our phone holder is 0.63inch. If the width of your phone case plus the phone exceeds 0.63inch, it cannot be placed on the phone holder.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 3.74 x 3.14 x 1.38 Inches | Weight: 0.10 Pounds
See On Amazon #7
Smatree Portable Osmo Pocket 2 Battery Grip,Power Stick,5000mAh Extension Rod Power Bank Compatible with DJI Osmo Pocket 2 & DJI Osmo Pocket 1 (Not fit with Pocket 3!)
Asin: B07SX1Z5ZC | Model: DP20 DH4 | PartNumber: DP20 DH4
Durable Material : 180Mm Hand Grip With 1/4 Standard Screw Port At The Bottom Allows Universal Tripod To Be Attached.Soft Silicone Rubber Hand Grip And Convertable Charging Base Perfectly Protect The Device.（Non-Stretchable）.
Note:1.The Knob Is Connected To The Smatree Charging Stick And Cannot Be Reomved. Besides, There Is No Need To Remove The Knob, For You Can Tighten Or Loosen The Holder For Osmo Pocket & Phone/ Charing Base To The Left/Right. 2.If You Want To Change The Charging Base To The Phone/Osmo Pocket Holder, All You Need To Do Is To Loosen The Charging Base By Turning The Knob(Instead Of Taking It Off) To The Right, And Then Insert The Holder And Tighten It To The Left..
Improves Stability And Versatility: Make Quick And Sudden Movements In A Horizontal State --External Silicone Rubber Handle Provides A Firm Grip Help You Create Professional-Quality Video Whenever You Want.The Built-In Safety System Fully Protects The Charger From Short Circuit, Over-Current ,Low- Voltage And Overheat ..
High-Speed Charging : 5V/2A Type-C Output Port For Osmo Pocket Or Smartphone .Fully Charging The Osmo Pocket Need About 90 Mins ,Fully Charges Itself About 4 Hours (Not Use The Osmo Pocket )..
Features
- Large Capacity:Built-in rechargeable 5000mAh battery supply, It can charge about 2 times for DJI OSMO Pocket. efficiently extend your shooting time.(Not fit with Pocket 3!) Note When charging the pocket 2,a little hard to insert, please fully insert it into the base.
- High-Speed Charging : 5V/2A Type-C output port for OSMO Pocket or Smartphone .Fully charging the OSMO Pocket need about 90 mins ,Fully charges itself about 4 hours (not use the OSMO Pocket ).
- Durable Material : 180mm hand grip with 1/4 Standard Screw port at the bottom allows universal tripod to be attached.Soft Silicone rubber hand grip and convertable charging base perfectly protect the device. Non-stretchable
- Improves stability and versatility: Make Quick and Sudden Movements in a horizontal state --external silicone rubber handle provides a firm grip help you create professional-quality video whenever you want.The built-in safety system fully protects the charger from short circuit, over-current ,Low- voltage and overheat .
- NOTE:1.The knob is connected to the smatree charging stick and cannot be reomved. Besides, there is no need to remove the knob, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the left/right. 2.If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knob(instead of taking it off) to the right, and then insert the holder and tighten it to the left.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 7.09 x 0.79 x 0.79 Inches | Weight: 0.00 Pounds
Warranty: 1 Year
See On Amazon #8
Smatree Q3 Telescoping Selfie Stick with Tripod Stand Compatible for Insta360, GoPro Hero 12/11/10/9/8/7/6/5/4+/3/Max/Session/GOPRO Hero 2018/AKASO/OSMO Action Camera/DJI Pocket 2/SJCAM/and Cell Phone
Asin: B00XN1P9QI | Model: Smapole Q3 | PartNumber: Smapole Q3 | Ean: 0712322196315, 4139052346289 | UPC: 712322196315
Selfie Stick Allows Quick Length Adjustments From 11.8″To 36.6″. Simply Twist Counter Clockwise To Release, Choose Your Desired Length, And Twist Clockwise To Lock..
The Combination Of Camera Selfie Stick +Tripod Stand Enables You To Record Photo And Video For Hours With Minimum Effort. This Professional Design Bring You A Relaxed Shooting Environment..
Universal Tripod For Any Monopod With 1/4" Screw Port At The Bottom To Stand Alone. It Is Durable And Sturdy, Holds Monopod On Top Securely..
Smapole Q3 Is Made Of High Quality Aluminum Tube For Durable Use. Slip Resistant Rubber And Wrist Strap Around The Selfie Stick, Prevent Unexpected Falling Off, Your Camera/Cell Phone Will Be Well Protected..
Features
- Flexible ball head provide 360 degree rotation angle for your camera and cell phone to get different best shooting position. Fits for Insta360 ONE/Insta360 X3/ONE X2, GoPro Hero 12/11/10/9/8/7/6/5/4/3+/3/Session/Max Cameras / for AKASO, DJI OSMO Action/DJI OSMO Action 2 Camera Ricoh Theta S, M15 Cameras. Compact Cameras(1/4" thread) / Cell Phones(56mm-80mm)
- SmaPole Q3 is made of high quality aluminum tube for durable use. Slip resistant rubber and wrist strap around the selfie stick, prevent unexpected falling off, your camera/cell phone will be well protected.
- Selfie stick allows quick length adjustments from 11.8 to 36.6 . Simply twist counter clockwise to release, choose your desired length, and twist clockwise to lock.
- Universal tripod for any monopod with 1/4 screw port at the bottom to stand alone. It is durable and sturdy, holds monopod on top securely.
- The combination of camera selfie stick +tripod stand enables you to record photo and video for hours with minimum effort. This professional design bring you a relaxed shooting environment.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 0.93 Pounds
See On Amazon #9
Smatree Extendable Aluminum Selfie Stick/Monopod Compatible for GoPro Hero 12/11/10/9/Max/8/7/6/5/4/3+/GOPRO Hero(2018)/Insta360 One/AKASO GeekPro SJCAM SJ4000 SJ5000, Action 2 Camera
Asin: B00ST1Y2QU | Model: 4331971174 | PartNumber: 4331971174 | Ean: 0701056792733 | UPC: 701056792733
Slip Resistant Rubber And Wrist Strap Around The Selfie Stick, Your Hand Control The Shooting Angle Comfortably And Safely..
The Specific Mount Of Selfie Stick Can Be Removed To Reveal A Standard 1/4" Mount Compatible With Other Compact Cameras, Fits For Gopro Cameras / 1/4" Thread Compact Cameras..
Compatible For Insta360 X3/One/One X2, Gopro Hero12/11/10/9/8/7/6/5/4/3+/3/Session/Gopro Hero 2018/Dji Pocket 2/Dji Osmo Action 2 Camera/Sjcam/Akaso/And Cell Phone.
The Selfie Stick Lightweight, Portable And Convenient To Carry Around..
Selfie Stick Allows Quick Length Adjustments From 11.8″To 36.6″. Simply Twist Counter Clockwise To Release, Choose Your Desired Length, And Twist Clockwise To Lock. After Testing, We Find The 11.8″To 36.6″ Gopro Monopod Pole Can Save Your Arm Strength, Make You Feel Comfortable..
Features
- Selfie stick flexible ball head can be adjusted to 360 degree rotation for different best angles shooting.
- Selfie stick allows quick length adjustments from 11.8 to 36.6 . Simply twist counter clockwise to release, choose your desired length, and twist clockwise to lock. After testing, we find the 11.8 to 36.6 gopro monopod pole can save your arm strength, make you feel comfortable.
- Slip resistant rubber and wrist strap around the selfie stick, your hand control the shooting angle comfortably and safely.
- The Selfie Stick lightweight, portable and convenient to carry around.
- The specific mount of Selfie Stick can be removed to reveal a standard 1/4 mount compatible with other compact cameras, fits for GoPro cameras / 1/4 thread compact cameras.
- Compatible for Insta360 X3/ONE/ONE X2, GoPro Hero12/11/10/9/8/7/6/5/4/3+/3/Session/GOPRO Hero 2018/DJI Pocket 2/DJI OSMO Action 2 Camera/SJCAM/AKASO/and Cell Phone
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 0.57 Pounds
See On Amazon #10
Smatree Extension Rod Power Stick, 5000mAh Portable Osmo Pocket 2 Power Bank with Tripod Compatible with DJI Osmo Pocket 2 & DJI Osmo Pocket 1(Not fit with Pocket 3!)
Asin: B07QZC97SD | Model: DP20 DH6 | PartNumber: DP20 DH6
Unique Design : Tripod Part Made Of Aluminum Alloy,You Could Choose Any Angle Or Situation For Footage And Video Vlog.Soft Silicone Rubber Hand Grip And Convertable Charging Base Perfectly Protect The Device.（Non-Stretchable）.
Note:1.The Knob Is Connected To The Smatree Charging Stick And Cannot Be Reomved. Besides, There Is No Need To Remove The Knob, For You Can Tighten Or Loosen The Holder For Osmo Pocket & Phone/ Charing Base To The Left/Right. 2.If You Want To Change The Charging Base To The Phone/Osmo Pocket Holder, All You Need To Do Is To Loosen The Charging Base By Turning The Knob(Instead Of Taking It Off) To The Right, And Then Insert The Holder And Tighten It To The Left..
Improves Stability And Versatility: Make Quick And Sudden Movements In A Horizontal State --External Silicone Rubber Handle Provides A Firm Grip Help You Create Professional-Quality Video Whenever You Want. The Built-In Safety System Fully Protects The Charger From Short Circuit, Over-Current ,Low- Voltage And Overheat ..
High-Speed Charging : 5V/2A Type-C Output Port For Osmo Pocket Or Smartphone .Fully Charging The Osmo Pocket Need About 90 Mins ,Shorter Than Original Charging Case .Fully Charges Itself About 4 Hours (Not Use The Osmo Pocket )..
Features
- Large Capacity: Built-in rechargeable 5000mAh battery supply, It can charge about 2 times for DJI OSMO Pocket. efficiently extend your shooting time. (Not fit with Pocket 3!) Please fully insert the Pocket / Pocket 2 into the charger base when charging.
- High-Speed Charging : 5V/2A Type-C output port for OSMO Pocket or Smartphone .Fully charging the OSMO Pocket need about 90 mins ,Shorter than original charging case .Fully charges itself about 4 hours (not use the OSMO Pocket ).
- Unique Design : Tripod part made of Aluminum alloy,you could choose any angle or situation for footage and video vlog.Soft Silicone rubber hand grip and convertable charging base perfectly protect the device. Non-stretchable
- Improves stability and versatility: Make Quick and Sudden Movements in a horizontal state --external silicone rubber handle provides a firm grip help you create professional-quality video whenever you want. The built-in safety system fully protects the charger from short circuit, over-current ,Low- voltage and overheat .
- NOTE:1.The knob is connected to the smatree charging stick and cannot be reomved. Besides, there is no need to remove the knob, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the left/right. 2.If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knob(instead of taking it off) to the right, and then insert the holder and tighten it to the left.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
See On Amazon #11
Smatree Selfie Stick Compatible with DJI OSMO Pocket 2/OSMO Pocket/GoPro Hero 9/8/7/6/5/4/3+/3 / SJCAM/AKASO/Xiaomi Yi and Cell Phone
Asin: B07S83W69J | Model: Smatree-SA531 | PartNumber: Smatree-SA531
The Smatree Expanison Bracket Is Specially Designed For Osmo Pocket Cameras, Ajustable Screw And Unsealed Expansion Bracket Could Effectively Install And Use Your Osmo Pocket Camera..
Package List: 1 X Smatree Selfie Stick, 1 X Tripod Stand, 1 X Expansion Bracket For Dji Osmo Pocket, 1 X Phone Holder, 1 X Screw..
How To Use The Expansion Bracket: You Can Lock The Bracket By Turnning The Screw To The Right And Unlock It By Turning The Screw To The Left..
Expansion Bracket Made Of High Quality Aluminum Alloy , Soft Rubber Inside Of The Brackets For Osmo Pocket, Which Are More Stable And Can Protect Your Osmo Pocket Camera From Falling Down And Scratching..
Features
- SmaPole is made of high quality aluminum tube for durable use. Slip resistant rubber and wrist strap around the selfie stick, prevent unexpected falling off, Suit for DJI OSMO Pocket camera/Gopro hero 7/6/5/4/3/2/1 hero (2018)/DJI OSMO Action camera.
- Expansion bracket made of high quality aluminum alloy , soft rubber inside of the brackets for OSMO Pocket, which are more stable and can protect your OSMO Pocket camera from falling down and scratching.
- The Smatree expanison bracket is specially designed for OSMO Pocket cameras, Ajustable screw and Unsealed expansion bracket could effectively install and use your OSMO Pocket camera.
- How to Use the Expansion Bracket: You can lock the bracket by turnning the screw to the right and unlock it by turning the screw to the left.
- Package List: 1 x Smatree Selfie Stick, 1 x Tripod stand, 1 x Expansion Bracket for DJI OSMO Pocket, 1 x phone holder, 1 x Screw.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 36.60 x 3.50 x 3.50 Inches | Weight: 1.12 Pounds
See On Amazon #12
Smatree 3.6L Hard Carrying Case Compatible with DJI Osmo Pocket 3/Osmo Pocket 3 Creator Combo Accessories[Case Only]
Asin: B0CNNZJCG9 | Model: D180P3 | PartNumber: D180P3
【Portable】-Ideal For Travel Or Home Storage, Built In Carry Handle And Karabiner. It Is Very Convenient To Carry Outside. Easy To Store In A Backpack Or Luggage. You Can Take It Anywhere..
【Packing List】1 X Osmo Pocket 3 Carrying Case, Size: 25*18*8Cm/9.8*7*3.1Inch, Weight：540G/1.2Lb. (Note: Only Case, Osmo Pocket 3 And Other Accessories Are Not Included.).
【Large Capacity】-Mesh Pocket With A Zipper Enlarges The Storage Space For Cables Or Small Other Accessories And Keep Them In Good Condition..
【Upgrade Protection】-Compared With Similar Carrying Cases, This Case Uses A More Robust Shell Material. Thicker Shell With Stronger Protection More Durable. Made Of High-Density Material For More Durable, Which Is Waterproof And Anti-Scratch. Perfectly Protect Your Osmo Pocket 3 Accessories Safety..
Features
- Compatible -Specially designed for DJI Osmo Pocket 3. It can holds 1 x Osmo Pocket 3 , 1 x Pocket 3 battery handle, 1 x Pocket 3 Handle With 1/4 Thread, 1 x Pocket 3 Expansion Adapter, 1 x Osmo Mini Tripod, 1 x DJI Mic 2 Windscreen, 3 x pocket 3 filters, 2 x SD Cards and more other accessories.
- Upgrade Protection -Compared with similar carrying cases, this case uses a more robust shell material. Thicker shell with stronger protection more durable. Made of high-density material for more durable, which is waterproof and anti-scratch. Perfectly protect your osmo pocket 3 accessories safety.
- Portable -Ideal for travel or home storage, built in carry handle and karabiner. It is very convenient to carry outside. Easy to store in a backpack or luggage. You can take it anywhere.
- Large capacity -Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
- Packing List 1 x Osmo Pocket 3 Carrying Case, Size: 25*18*8cm/9.8*7*3.1inch, Weight 540g/1.2lb. (Note: Only Case, Osmo Pocket 3 and other accessories are NOT included.)
- See more on Amazon...
Brand: Smatree
Weight: 1.19 pounds
See On Amazon #13
Smatree 4L Hard Carrying Case Compatible with DJI Osmo Pocket 3/Gopro Hero 12/11/10/9/8/7/6/5/Hero 2018/Osmo Action 4 and Accessories(Case Only)
Asin: B0CS6JL9VC | Model: SM260P3 | PartNumber: SM260P3
Mesh Pocket With A Zipper Enlarges The Storage Space For Cables Or Small Other Accessories And Keep Them In Good Condition..
If You Have Any Question, Please Feel Free To Contact Us, We Will Do Our Best To Help You Solve It..
Ideal For Travel Or Home Storage Case, Built In Carry Handle And Carabiner Loop To Keep Your Osmo Pocket 3 And Gopro Action Camera And Accessories Secure..
Made Of High-Density Material For More Durable And Crush Resistant, Great Protect Your Osmo Pocket 3 And Gopro And Accessories Safe..
Features
- The carry case is specially desiged for DJI Osmo Pocket 3 and Gopro. It can hold 1 x Osmo Pocket 3, 1 x Gopro Hero 12/11/10/9/8/7/6/5/4/3+/3, 1 x Pocket 3 Battety Handle, 1 x Handle with 1/4 Thread, 1 x Gopro Dual Battery Charger, 1 x Expansion Adapter, 3 x Gopro Battery, 1 x Mini Tripod, 2 x SD Cards, 4 x Filter and more others acccessories.
- Made of high-density material for more durable and crush resistant, great protect your osmo pocket 3 and gopro and accessories safe.
- Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
- Ideal for travel or home storage case, built in carry handle and carabiner loop to keep your osmo pocket 3 and gopro action camera and accessories secure.
- If you have any question, please feel free to contact us, we will do our best to help you solve it.
- See more on Amazon...
Brand: Smatree
See On Amazon #14
Smatree GA700-3 Waterproof Hard Case Compatible for GoPro Hero 11/10/9/8/7/6/5/4/3 Plus/3/GoPro Hero 2018/DJI OSMO Action Camera, 11.7 Liter(Camera and Accessories Not Included)
Asin: B00KA4UJD4 | Model: Smatree-SC020 | PartNumber: Smatree-SC020 | Ean: 0601359249562 | UPC: 601359249562
This Double-Layer Case Provides Plenty Of Space For Cameras And Accessories Such As Suction Cups, Floating Handle Grip, Head Strap Or Chest Strap Belt Etc..
Risk-Free Purchase: We Offer 100% Money Back Or Replacement Guarantee If There Is Any Quality Problem..
The Soft And Flexible Foam On The Top Protects Your Gopro Cameras And Accessories From Scuffing.
Made Of Abs Materials, Smacase Ga700-3 Is Floaty, Durable, Watertight And Dust-Proof.
Features
- Exterior size: 11.02" X 9.68" X 6.14" fits for cameras max to 3 and Accessories (Refer to pictures)
- Made of ABS materials, SmaCase GA700-3 is floaty, durable, watertight and dust-proof
- This double-layer Case provides plenty of space for Cameras and Accessories such as suction cups, floating handle grip, head strap or chest strap belt etc.
- The soft and flexible foam on the top protects your gopro cameras and accessories from scuffing
- RISK-FREE PURCHASE: We offer 100% money back or replacement guarantee if there is any quality problem.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 6.14 x 11.02 x 9.68 Inches | Weight: 3.60 Pounds
See On Amazon #15
Smatree Metal Mini Tripod,Desktop Tabletop Stand Tripod,Fit for Gopro Hero/Osmo Mobile/hohem Gimbal Handle Grip Stabilizer/Smooth 4/Crane Plus/Crane 2/Vimble 2/Ronin-S Etc.
Asin: B09W4C3ZLF
Widely Compatible: Fit For Gopro Hero 10/9/8/7/6,Smooth 4, Crane Plus, Crane 2, Osmo Mobile, Ronin-S, Vimble 2, Gimbal Handle Grip Stabilizer And All Cameras/Selfie Stick/Monopod Pole Which Have 1/4 Inch Screw..
1 Year Warranty: Always Feel Free To Contact Us If Any Questions Or Needs, We Will Support For You Shortly..
Expensive Than Other Tripods But Well Worth It.With Anti-Slip Device To Ensure The Safe Use Of Your Equipment..
Easy To Use: Ultra Lightweight And Compact, Just Screw Your Device Onto It.
Features
- Top Quality: Made entirely of expensive metal, top quality, solid and stable.
- Easy to Use: Ultra lightweight and compact, just screw your device onto it
- Widely Compatible: Fit for Gopro Hero 10/9/8/7/6,Smooth 4, Crane Plus, Crane 2, Osmo Mobile, Ronin-S, Vimble 2, Gimbal Handle Grip Stabilizer and All Cameras/selfie stick/monopod pole which have 1/4 inch screw.
- Expensive than other tripods but well worth it.With anti-slip device to ensure the safe use of your equipment.
- 1 Year Warranty: Always feel free to contact us if any questions or needs, we will support for you shortly.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
See On Amazon #16
Smatree Charging Stick for DJI OSMO Pocket 2, 5000mah Power Charger Compatible with DJI Osmo Pock 2/1, Power Bank with Phone Holder Pocket Mount Set and Tripod Upgrade Version
Asin: B0B3HSFL6T | Model: DP30 DH7 | PartNumber: DP30 DH7
【Faster-Speed Charging】5V/2A Type-C Dual Output Ports For Osmo Pocket 2 And Smartphone. Fully Charges The Osmo Pocket 2 Need About 72 Mins, Shorter Than Original Charging Case. Fully Charges Our Smatree Power Bank Need About 2-3 Hours. (Not Use The Osmo Pocket )..
【With Tripod & Cold Shoe Mount】1/4" Standard Tripod Screw Port On The Bottom Which You Can Use Our Power Bank With Tripod. And The Cold Shoe Mount At The Top Of Phone Holder, Compatible For Led Light, Microphone Stand And Flash Lamp(All Not Included In Package)..
【After-Sales Service】Smatree Power Bank For Dji Osmo Pocket 2 Is Offered With Excellent Quality. We Also Offer Professional Service And 12-Month Warranty..
【Safety】The Power Stick Built-In Safety System To Protect The Charger From Short-Circuit, Over-Current, Over-Voltage And Over-Heat. 160Mm Soft Silicone Rubber Hand Grip Increasing The Friction To Prevent Accidental Slip, While Anti-Freezing Hand. （Non-Stretchable）.
【There Are Two Combinations】 Combination 1 - Powerstick + Convertible Charging Base For Pocket 1/2; Combination 2 - Powerstick + Convertible Knob + Osmo Pocket Phone Holder Set For Pocket 1/2 And Phone..
Features
- Compatible For This charging stick special designed for DJI Osmo Pocket 2/DJI Osmo Pocket 1. Built-in a rechargeable 5000mAh battery, it can charge about 2.5 times for DJI OSMO Pocket 2/ OSMO Pocket 1. It can increase DJI OSMO Pocket s battery life by 6 hours. Efficiently extend your shooting time.
- There are two Combinations Combination 1 - PowerStick + Convertible charging base for pocket 1/2; Combination 2 - PowerStick + Convertible knob + OSMO Pocket phone holder set for pocket 1/2 and phone.
- Faster-Speed Charging 5V/2A Type-C dual output ports for OSMO Pocket 2 and Smartphone. Fully charges the OSMO Pocket 2 need about 72 mins, shorter than original charging case. Fully charges our smatree power bank need about 2-3 hours. (Not use the OSMO Pocket ).
- Safety The Power Stick built-in safety system to protect the charger from short-circuit, over-current, over-voltage and over-heat. 160mm soft silicone rubber hand grip increasing the friction to prevent accidental slip, while anti-freezing hand. Non-stretchable
- With Tripod & Cold Shoe Mount 1/4 standard tripod screw port on the bottom which you can use our power bank with tripod. And the cold shoe mount at the top of phone holder, compatible for led light, microphone stand and flash lamp(ALL NOT included in package).
- After-sales Service Smatree power bank for DJI Osmo Pocket 2 is offered with excellent quality. We also offer professional service and 12-month warranty.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 0.77 Pounds
See On Amazon #17
Smatree X1 Aluminium Foldable Pole 3-Way Ajustable Selfie Stick Compatible for GoPro Hero 12/11/MAX//10/9/8/7/6/5/4/3+/3/Hero(2018),DJI OSMO Action Camera.
Asin: B00SXOLT3C | Model: OMEL-EZ-PN-6715170 | PartNumber: OMEL-EZ-PN-6715170 | Ean: 4139052225355, 0701056753574 | UPC: 701056753574
Foldable Pole Can Be Adjusted To Different Shapes For Best Shooting Effects..
Fits For Gopro Max/Hero 12/11/10/9/8/7/6/5/4/3+/3/Hero(2018) Cameras, And Fits For 1/4" Thread Compact Cameras..
Group Photo-Taking With Quick Length Extension From 5.9 Inch To 19.3 Inch, Portable And Convenient To Carry Around, This Stick Can Be Easily Put In Your Purses Or Pockets..
Gopro 3-Way Pole: Camera Grip, Foldable Extension Arm, And Low Angle Shot Stabilizer.
Features
- Made of high-quality Aluminium Alloy for greater strength and stability, compatible for DJI OSMO Action 2/GoPro MAX/Hero 12/11/10/9/8/7/6/5/4/3+/3/Hero(2018).
- GoPro 3-Way Pole: Camera Grip, Foldable Extension Arm, and Low Angle Shot Stabilizer
- Foldable Pole can be adjusted to different shapes for best shooting effects.
- Group photo-taking with quick length extension from 5.9 inch to 19.3 inch, portable and convenient to carry around, this stick can be easily put in your purses or pockets.
- Fits for GoPro MAX/Hero 12/11/10/9/8/7/6/5/4/3+/3/Hero(2018) cameras, and fits for 1/4 thread compact cameras.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 5.90 x 19.30 x 5.90 Inches | Weight: 0.30 Pounds
See On Amazon #18
Smatree 5.5L Hard Carrying Case Compatible with DJI Osmo Pocket 2/Osmo Pocket, Extension Rod, OSMO Pocket Waterproof Case and Other Accessories (OSMO Pocket and Accessories are NOT Included)
Asin: B07X2VM9RZ | Model: Smatree-CA014 | PartNumber: Smatree-CA014
Hands Free: Ideal For Travel Or Home Storage, You Are Finally Able To Have Both Hands Free With The Shgoulder Strap..
Warranty: If You Are Confronted With Any Problems, Please Feel Free To Contact Us By Email And We Will Try Our Best To Help You Within 24 Hours..
Accessory Pocket: There Is A Mesh Pocket With A Zipper For Holding Cables And Other Accessories..
High Quality: Well Made And Perfectly Cut To Fit The Camera And Accessories, Harder Than Tougher For Protecting Your Osmo Pocket..
Features
- Compatible for: Designed for DJI Osmo Pocket and its accessories, including 1 x Osmo Pocket,1 x Osmo Pocket Charging Case, 1 x Osmo Pocket Extension Rod, 1 x Original DJI OSMO Pocket Waterproof Case, 1 x Wireless Module,1 x Controller Wheel,1 x Accessory Mount,1 x Audio Adapter, 2 x Smartphone Adapters, 2 x SD Cards,4 x ND Filters.
- High Quality: Well made and perfectly cut to fit the camera and accessories, harder than tougher for protecting your osmo pocket.
- Hands Free: Ideal for travel or home storage, you are finally able to have both hands free with the shgoulder strap.
- Accessory Pocket: There is a mesh pocket with a zipper for holding cables and other accessories.
- Warranty: If you are confronted with any problems, please feel free to contact us by email and we will try our best to help you within 24 hours.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
See On Amazon #19
Smatree Telescoping Selfie Stick with Tripod Stand Compatible with DJI Osmo Pocket 2/OSMO Pocket/GoPro Hero 12/11/10/9/8/7/6/5/SJCAM/AKASO/Xiaomi Yi and Cell Phone
Asin: B07S1YVZQM | Model: Smapole Q3 | PartNumber: Smapole Q3
Expansion Bracket Made Of High Quality Aluminum Alloy , Soft Rubber Inside Of The Brackets For Osmo Pocket, Which Are More Stable And Can Protect Your Osmo Pocket Camera From Falling Down And Scratching..
How To Use The Expansion Bracket: You Can Lock The Bracket By Turnning The Screw To The Right And Unlock It By Turning The Screw To The Left..
The Smatree Expanison Bracket Is Specially Designed For Osmo Pocket Cameras, Ajustable Screw And Unsealed Expansion Bracket Could Effectively Install And Use Your Osmo Pocket Camera..
Made Of High Quality Aluminum Tube For Durable Use. Slip Resistant Rubber And Wrist Strap Around The Selfie Stick, Prevent Unexpected Falling Off, Your Camera/Cell Phone Will Be Well Protected..
Features
- Flexible ball head provide 360 degree rotation angle for your camera and cell phone to get different best shooting position. Fits for GoPro Hero 12/11/10/9/8/7/6/5/4/3+/3/2/1/Session Cameras / for DJI OSMO Action Camera Ricoh Theta S, M15 Cameras/ Compact Cameras(1/4" thread) / Cell Phones(56mm-80mm)
- Made of high quality aluminum tube for durable use. Slip resistant rubber and wrist strap around the selfie stick, prevent unexpected falling off, your camera/cell phone will be well protected.
- Expansion bracket made of high quality aluminum alloy , soft rubber inside of the brackets for OSMO Pocket, which are more stable and can protect your OSMO Pocket camera from falling down and scratching.
- The Smatree expanison bracket is specially designed for OSMO Pocket cameras, Ajustable screw and Unsealed expansion bracket could effectively install and use your OSMO Pocket camera.
- How to Use the Expansion Bracket: You can lock the bracket by turnning the screw to the right and unlock it by turning the screw to the left.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
See On Amazon
Looking For Something Else?
Search