E-cowlboy 9U-6891 Injector Sleeve Cup Remover&Installer Set for CAT Caterpillar 3406E C10 C12 C15 C16 C-18 Engine Heavy Duty Steel (6 PCS)
Asin: B07SGPX2ZB | Model: HG-1547 | PartNumber: HG-1547 | Ean: 7426999800040
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Benefits — Used To Install And Remove Injector Sleeves. Works In A Easier Way To Save Your Time And Money..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Includes 6 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge..
Superior Quality — Advanced Heavy Duty Steel Process, Durability, Anti-Corrosion, High Precision And Hardness To Provide A Much Longer Service Life..
Features
- Great Compatibility Works on Caterpillar (CAT) C-10,C-12,C-15,C-16,C-18 and 3406E Engines. (The new puller bridge can be used on all three engines)
- Superior Quality Advanced heavy duty steel process, durability, anti-corrosion, high precision and hardness to provide a much longer service life.
- Benefits Used to install and remove injector sleeves. Works in a easier way to save your time and money.
- Includes 6 Tools 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon Similar To Ecowlboy 9U6891 Injector Sleeve Cup
#1
Injector Sleeve Cup/Seat/Bore Cleaning Brush Kit Replace AP0084 AP0085 3252 For 1994~2018 Ford Powerstroke 6.0L 6.4L 6.7L 7.3L / Caterpillar 3126 C7 C9 / Navistar / Maxxforce Stainless Steel (2 PCS)
Asin: B081GQJRV1 | Ean: 7427046749121
Upgrade Design — Removing Carbon Deposits, Rust, Dirt And Other Debris From Injector Seats, Bores, And Cups Without Damage. Surfaces Are Cleaned And Polished To Insure Good Seating And Sealing. Make The Job Easier To Save Your Time And Money..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Brush, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Special Features — Includes 1–Stainless Steel Spiral Tube Brush And 1–Stainless Steel Flat Bottom Brush. This Complete Injector Brush Kit Should Be A Necessity For Anyone Pulling And Swapping Injectors..
Superior Quality — Premium Grade Wear-Resistant Stainless Steel, Durability, Anti-Corrosion And Never Rust. Comfortable Abs Plastic Handle To Keep Stable And Safe. Provides A Much Longer Service Life..
Features
- Great Compatibility Fit for Ford 4.5L LCF 6.0L 6.4L 6.7L 7.3L Powerstroke | For Caterpillar 3126 C7 C9 | For Navistar T444E DT466 VT365 VT275 | For MaxxForce 5/7/DT/9/10/N9/N10 | For GM | For Chevrolet 6.6L | For Dodge Cummins 5.9L 6.7L | For John Deere 4.5L 6.8L 8.1L 9.0L HPCR | For Isuzu 4HK1 6HK1 HPCR.
- Superior Quality Premium grade wear-resistant stainless steel, durability, anti-corrosion and never rust. Comfortable ABS plastic handle to keep stable and safe. Provides a much longer service life.
- Upgrade Design Removing carbon deposits, rust, dirt and other debris from injector seats, bores, and cups without damage. Surfaces are cleaned and polished to insure good seating and sealing. Make the job easier to save your time and money.
- Special Features Includes 1 Stainless Steel Spiral Tube Brush and 1 Stainless Steel Flat Bottom Brush. This complete injector brush kit should be a necessity for anyone pulling and swapping injectors.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our brush, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #2
E-cowlboy 9U-6891 Injector Sleeve Remover Installer Set+9U-7227 Injector Height Tool+J-38587-a Engine Barring Socket for CAT Caterpillar 3406E C-15 C-16 Engines (8 PCS)
Asin: B081RBCZYS | Model: HG - 3406 | PartNumber: HG - 3406 | Ean: 7427046756273
Benefits — Used To Install And Remove Injector Sleeves. Easily & Precisely Adjust The Injector Height Of The Engine And Easy To Rotate The Engine..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Include 8 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge / 9U-7227 Injector Height Tool / J-38587-A Engine Barring Socket..
Superior Quality — Advanced Precision Machined Out Of Aircraft Grade Billet Aluminum And Heavy Duty Steel Process, Durability, Anti-Corrosion And Anti-Rust. High Precision And Hardness To Provide A Much Longer Service Life..
Features
- Great Compatibility Works on Caterpillar (CAT) 3406E / C-15 / C-16. Essential tool kit for engine operation to save your time and money!
- Superior Quality Advanced precision machined out of aircraft grade billet aluminum and heavy duty steel process, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.
- Benefits Used to install and remove injector sleeves. Easily & Precisely adjust the Injector Height of the engine and easy to rotate the engine.
- Include 8 Tools 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge / 9U-7227 Injector Height Tool / J-38587-A Engine Barring Socket.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #3
Dorman 904-213 Fuel Injector Sleeve Compatible with Select Ford Models
Asin: B001C9AGK2 | Model: 904-213 | PartNumber: 904-213 | Ean: 0019495122722 | UPC: 019495122722
Cost-Effective Solution - Offers Original Equipment Quality At Competitive Price.
Ensure Fit - To Make Sure This Part Fits Your Exact Vehicle, Input Your Make, Model And Trim Level Into The Garage Tool.
Quality Tested - This Part Has Undergone Extensive Testing To Ensure A Quality Fit And Long Service Life.
Durable Construction - This Part Is Made From Quality Materials To Resist Damage From Fuel And Extreme Temperatures.
Features
- Ideal replacement - this fuel injector sleeve is a direct replacement for the original equipment part on specified engines
- Durable construction - this part is made from quality materials to resist damage from fuel and extreme temperatures
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- See more on Amazon...
Brand: Dorman | Manufacturer: Dorman Products
Dimensions: 3.00 x 3.10 x 3.20 inches | Weight: 0.20 pounds
Warranty: Limited Lifetime Warranty
See On Amazon #4
JDMSPEED New Injector Sleeve Cup Removal Installation Tool Kit F4TZ9F538A Replacement For Ford 1994-2003
Asin: B07NWG5V85 | Model: F4TZ9F538A, 1814376C1, ZTSE4303 | PartNumber: F4TZ9F538A, 1814376C1, ZTSE4303 | Ean: 0711766876272 | UPC: 711766876272
Small Enough To Enable You To Change Even The Hard To Get At Cups At The Rear Of The Engine.
Package Include: 1X Fuel Injector Sleeve Installer, 1X Fuel Injector Sleeve Remover, 8X Injector Cup Sleeve Plug, 8X F4tz-9F538-A Sleeve, 8X Injector O-Ring Kit, 2X Brushes.
Easy To Install: The Injector Tool Helps In Installing The Injector Cups,And Does Not Damage The Cup In The Process.
Replace Part Number: Injector Cup Oem Number: F4tz9f538a, 1814376C1, F4tz-9F538-A; Injector O-Rings Oem Number: Xc3z9229ab, Xc3a-9229-Ab, 1833564C92, 1823492C97, F8tz9229aa, 1833564C91, Cm5010.
Injector Sleeve Cup Removal Installation Tool Kit Fitment: Replacement For Ford E-Series 7.3L 1994-2003; Replacement For Ford F-Series 7.3L 1994-2003; Replacement For Ford Excursion 7.3L 1994-2003; Replacement For Ford Powerstroke 7.3L 1994-2003; Replacement For Ford Navistar T444e, Dt466e 1994-2003; Replacement For Ford Caterpillar 3126, 3126B, 3126E Diesel Engines 1994-2003.
It Will Stay Sharp And You Can Use This Tool Hundreds Of Times.
This Job Can Be Done With The Cylinder Heads On, Works Great.
Features
- High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available
- This Job Can Be Done with The Cylinder Heads On, Works Great
- Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine
- It Will Stay Sharp and You Can Use This Tool Hundreds of Times
- Replace Part Number: Injector Cup OEM Number: F4TZ9F538A, 1814376C1, F4TZ-9F538-A; Injector O-rings OEM Number: XC3Z9229AB, XC3A-9229-AB, 1833564C92, 1823492C97, F8TZ9229AA, 1833564C91, CM5010
- Injector Sleeve Cup Removal Installation Tool Kit Fitment: Replacement For Ford E-Series 7.3L 1994-2003; Replacement For Ford F-Series 7.3L 1994-2003; Replacement For Ford Excursion 7.3L 1994-2003; Replacement For Ford Powerstroke 7.3L 1994-2003; Replacement For Ford Navistar T444E, DT466E 1994-2003; Replacement For Ford Caterpillar 3126, 3126B, 3126E Diesel Engines 1994-2003
- Package Include: 1x Fuel Injector Sleeve Installer, 1x Fuel Injector Sleeve Remover, 8x Injector Cup Sleeve Plug, 8x F4TZ-9F538-A Sleeve, 8x Injector O-Ring Kit, 2x Brushes
- Easy to Install: The injector tool helps in installing the injector cups,and does not damage the cup in the process
- See more on Amazon...
Brand: JDMSPEED | Manufacturer: JDMSPEED
Weight: 3.64 pounds
See On Amazon #5
9U-6891 Injector Sleeve Cup Remover & Installer Tool 6pcs Kit Compatible with CAT Caterpillar 3406E C10 C12 C15 C16 C18 Engine Heavy Duty Steel Tools
Asin: B09VBWG2Y8
Material:Made Of Sturdy Steel, Super Corrosion And Rust Resistant..
100% Satisfaction Guarantee: Don't Hesitate To Contact Us If Any Questions,We Will Offer Professional And Satisfactory Service..
Function:Designed To Install And Remove Injector Sleeves..
Features
- Compatible with Caterpillar (CAT) C-10,C-12,C-15,C-16,C-18 and 3406E Engines.
- Function:Designed to Install and Remove Injector Sleeves.
- Material:Made of sturdy steel, super corrosion and rust resistant.
- 100% Satisfaction guarantee: Don't hesitate to contact us if any questions,we will offer Professional and satisfactory service.
- See more on Amazon...
Brand: Winsgor | Manufacturer: Winsgor
See On Amazon #6
Suvnie 2 PCS Injector Sleeve Cup Bore Seat Cleaning Brush Kit, Professional Car Fuel Injector Brush with Handle, Stainless Steel Diesel Injector Brush Replace AP0084 AP0085 3252
Asin: B0CNRG46LC | Model: Injector Sleeve Cleaning Brush Kit | PartNumber: Injector Sleeve Cleaning Brush Kit
【Durable Material】: The Abs Handle Is Sturdy And Durable. The Grip Is Comfortable And Provides A Stable And Safe Hold. And It's Small, Lightweight And Durable. The Steel Wire Brush Head Is Hard, Wear-Resistant, Anti-Corrosion And Doesn't Rust. It Is Good Toughness, Not Easy To Break Or Deform..
【Wide Application】: This Complete Injector Brush Kit Should Be A Necessity For Anyone Pulling And Swapping Injectors, And It Will Be Your Professional Helper For Cleaning Fuel Injector And Protecting Your Vehicle's Engine. It Can Be Used To Replace The Injector Brushes With Oem Number Ap0084 And Ap0085 3252..
【Easy To Use】: Using A Brush Will Make Cleaning Easier. The Brush Head Is Flexible And Can Reach Any Hard-To-Reach Places In The Fuel Injectors In The Cylinder. The Handle Won't Make Your Hands Dirty And Make It Easier For You To Exert Force. There Is Also A Small Hole Above The Handle For Easy Hanging..
【Clean Dirt】: It Is Used To Clean Carbon Deposits And Dirt In The Injector Sleeve, So That Its Surface Can Be Sealed And Fixed Better After Cleaning And Polishing. It Can Extend The Time Of The Injector Sleeve To Ensure The Normal Driving Of The Vehicle And Stable Performance Of The Engine..
Features
- Package Included : This set of cleaning brushes contains 2 cleaning brushes. One is a spiral tube brush and the other is a flat bottom brush. The overall length of the spiral tube brush is 10.6 inches and the brush length is 6.1 inches. The overall length of the flat bottom brush is 11.4 inches and the brush length is 6.5 inches.
- Clean Dirt : It is used to clean carbon deposits and dirt in the injector sleeve, so that its surface can be sealed and fixed better after cleaning and polishing. It can extend the time of the injector sleeve to ensure the normal driving of the vehicle and stable performance of the engine.
- Durable Material : The ABS handle is sturdy and durable. The grip is comfortable and provides a stable and safe hold. And it's small, lightweight and durable. The steel wire brush head is hard, wear-resistant, anti-corrosion and doesn't rust. It is good toughness, not easy to break or deform.
- Easy to Use : Using a brush will make cleaning easier. The brush head is flexible and can reach any hard-to-reach places in the fuel injectors in the cylinder. The handle won't make your hands dirty and make it easier for you to exert force. There is also a small hole above the handle for easy hanging.
- Wide Application : This complete injector brush kit should be a necessity for anyone pulling and swapping injectors, and it will be your professional helper for cleaning fuel injector and protecting your vehicle's engine. It can be used to replace the injector brushes with OEM number AP0084 and AP0085 3252.
- See more on Amazon...
Brand: Suvnie | Manufacturer: Suvnie
Warranty: 0. 2.
See On Amazon #7
Bentolin Injector Sleeve Cup/Seat/Bore Cleaning Brush Kit Replace AP0084 AP0085 3252 Compatible For 1994~2018 Ford Powerstroke 6.0L 6.4L 6.7L 7.3L, Caterpillar 3126 C7 C9 / Navistar/Maxxforce
Asin: B086PRSBQM | Ean: 6190429742453
Includes 1X Stainless Steel Spiral Tube Brush And 1X Stainless Steel Flat Bottom Brush. This Complete Injector Brush Kit Should Be A Necessity For Anyone Pulling And Swapping Injectors..
Compatibility — Works On 4.5L Lcf 6.0L 6.4L 6.7L And 7.3L Powerstroke / Caterpillar(Cat) 3126 C7 C9 / Navistar T444e Dt466 Vt365 Vt275 / Maxxforce 5/7/Dt/9/10/N9/N10 / Gm / Chevrolet 6.6L / Dodge Cummins 5.9L 6.7L / Fit For John Deere 4.5L 6.8L 8.1L 9.0L Hpcr / Isuzu 4Hk1 6Hk1 Hpcr..
Cleaning Carbon Deposits And Dirt Out Of Injector Seats, Bores, And Cups Without Damage, This Brush Kit Makes Cleaning Easier And Prolong The Life Of Your Injector Sleeve.
Upgrade Design — Removing Carbon Deposits, Rust, Dirt And Other Debris From Injector Seats, Bores, And Cups Without Damage. Surfaces Are Cleaned And Polished To Insure Good Seating And Sealing. Make The Job Easier To Save Your Time And Money..
Features
- Superior Quality Premium grade wear-resistant stainless steel, high strength and toughness, anti-corrosion and never rust. Comfortable ABS plastic handle to keep stable and safe. Provide a much longer service life.
- Upgrade Design Removing carbon deposits, rust, dirt and other debris from injector seats, bores, and cups without damage. Surfaces are cleaned and polished to insure good seating and sealing. Make the job easier to save your time and money.
- Includes 1x Stainless Steel Spiral Tube Brush and 1x Stainless Steel Flat Bottom Brush. This complete injector brush kit should be a necessity for anyone pulling and swapping injectors.
- Cleaning carbon deposits and dirt out of injector seats, bores, and cups without damage, this brush kit makes cleaning easier and prolong the life of your injector sleeve
- Compatibility Works on 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke / Caterpillar(CAT) 3126 C7 C9 / Navistar T444E DT466 VT365 VT275 / MaxxForce 5/7/DT/9/10/N9/N10 / GM / Chevrolet 6.6L / Dodge Cummins 5.9L 6.7L / fit for John Deere 4.5L 6.8L 8.1L 9.0L HPCR / Isuzu 4HK1 6HK1 HPCR.
- See more on Amazon...
Brand: Bentolin | Manufacturer: AM-World
See On Amazon #8
Injector Sleeve Cup Removal & Installation tool with Parts Kit For 1994-2003 Ford Powerstroke 7.3L and Navistar T444e
Asin: B07JWF2NTS
High Speed Steel Tap Used In The Removal Tool Is The Highest Quality Available.
Comes With Tools And Sleeves.
It Will Stay Sharp And You Can Use This Tool Hundreds Of Times.
Small - Small Enough To Enable You To Change Even The Hard To Get At Cups At The Rear Of The Engine.
Features
- Save Time and Money -This Job Can Be Done with The Cylinder Heads On
- Small - Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine
- High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available
- It Will Stay Sharp and You Can Use This Tool Hundreds of Times
- Comes with Tools and Sleeves
- See more on Amazon...
Brand: Auto Parts Prodigy | Manufacturer: Auto Parts Prodigy
Dimensions: 4.00 x 10.00 x 6.00 Inches | Weight: 2.00 pounds
See On Amazon #9
munirater Injector Sleeve Cup Removal Install Tool Replacement for 1994-2003 F-Series 7.3L XC3Z9229AB F4TZ-9F538-A
Asin: B09J148XG5 | Model: Does not apply | PartNumber: Does not apply
Durable - The High-Speed Steel Cone Used In The Disassembly Tool Has Good Durability, It Will Remain Sharp, And You Can Use This Tool Hundreds Of Times.
Small - Small Enough To Enable You To Change Even The Hard To Get At Cups At The Rear Of The Engine.
Design - Other Tools On The Market Do Not Have Hardened Threads On The Disassembly Tools, These Tools Are Usually Too Dull To Complete The Job.
Part Numbers - Xc3z9229ab, F4tz-9F538-A.
Features
- Fitment - Replacement for 1994-2003 F-Series 7.3L, 1994-2003 E-Series 7.3L, 1994-2003 Powerstroke 7.3L
- Part Numbers - XC3Z9229AB, F4TZ-9F538-A
- Durable - The high-speed steel cone used in the disassembly tool has good durability, it will remain sharp, and you can use this tool hundreds of times
- Design - Other tools on the market do not have hardened threads on the disassembly tools, these tools are usually too dull to complete the job
- Small - Small enough to enable you to change even the hard to get at cups at the rear of the engine
- See more on Amazon...
Brand: munirater | Manufacturer: munirater
Dimensions: 2.17 x 10.83 x 2.76 Inches | Weight: 1.81 pounds
See On Amazon #10
Tuningsworld 7.3 Injectors Sleeve Cup Removal Installation Tool for Ford 7.3L Powerstroke 1994-2003 with O-Ring Seal Kit, OE Part Number 1833564C92 1814376C1 1833564C92, 1833564C91, 1823492C97
Asin: B08BZKP9F8 | Ean: 6941477725499
【Replace For Injector O-Rings Number】Xc3z-9229-Ab, Xc3z9229aa, Cm-5010, 1833564C92, 1833564C91, 1823492C97.
【Package Contents】1X Fuel Injector Sleeve Installer, 1X Fuel Injector Sleeve Remover In-Vehicle Alternative, 8 X F4tz-9F538-A Sleeve, 48X Injector O-Ring And Seal.
【Replace For Injector Cup Number】 F4tz-9F538-A, F4tz9f538a, 1814376C1.
【A Must Have】For Any Shop Working On Powerstroke 7.3L Engines. This Fuel Injector Sleeve Tool Helps With The Removal And Installation Of The Injector Cups Without Damaging The Cup In The Process..
Features
- Fitment for Ford 7.3L Powerstroke 1994-2003; for Navistar T444E, DT466E Diesel Engines; for Caterpillar 3126,3126B,3126E Diesel Engines
- A Must Have for any shop working on Powerstroke 7.3L Engines. This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process.
- Replace for Injector O-rings Number XC3Z-9229-AB, XC3Z9229AA, CM-5010, 1833564C92, 1833564C91, 1823492C97
- Replace for Injector Cup Number F4TZ-9F538-A, F4TZ9F538A, 1814376C1
- Package Contents 1x Fuel Injector Sleeve Installer, 1x Fuel Injector Sleeve Remover In-Vehicle Alternative, 8 x F4TZ-9F538-A Sleeve, 48x Injector O-Ring and Seal
- See more on Amazon...
Brand: Tuningsworld | Manufacturer: Tuningsworld
Dimensions: 5.12 x 11.02 x 5.12 inches | Weight: 3.20 pounds
See On Amazon #11
Hihaha NO.9056110018/9030119006 / Inner/Fuel Injector Nozzle Holder Spacer with 4 O-Rings for Toyota 4Runner 96-01 for Toyota Tacoma 95-04 / Fuel Injector Cup/Plastic / 4 Pcs/Black
Asin: B0C65QWTPQ
Oe Number：9056110018/9030119006..
Package List: 4 Pcs Fuel Injector Nozzle Holder Spacer With 4 O-Rings..
Direct Install: Direct Replace The Broken Or Aged Fuel Injector Cup To Repair The Injector And Improvide Vehicle Performance, Ensure To Provide A Well Driving Experience..
Product Information: The Fuel Injector Nozzle Holder Spacer With 4 O-Ring Kit Are Made Of Durable Rubber And Plastic Material, Which Is Strong, And Sturdy, It's Hard To Break Or Broken, Aim For Long Life Service..
Features
- VEHICLE COMPATIBILITY: for Toyota Tacoma 2RZ 2.4L, 3RZ 2.7L 1995-2004, for Toyota 4Runner 3RZ 2.7L 1996-2001, for Toyota T100 3RZ 2.7L 1993-1998.
- PRODUCT INFORMATION: The Fuel Injector Nozzle Holder Spacer with 4 O-Ring Kit are made of durable rubber and plastic material, which is strong, and sturdy, it's hard to break or broken, aim for long life service.
- OE Number 9056110018/9030119006.
- DIRECT INSTALL: Direct replace the broken or aged Fuel Injector Cup to repair the injector and improvide vehicle performance, ensure to provide a well driving experience.
- PACKAGE LIST: 4 Pcs Fuel Injector Nozzle Holder Spacer with 4 O-Rings.
- See more on Amazon...
Brand: Hihaha | Manufacturer: Hihaha
See On Amazon #12
Yoursme for C7 Injector Sleeve Cup Removal Installation Tool with Parts Kit Fit for Caterpillar Cat 3126B C7 C9 with Style HUEI injectors
Asin: B08HMV9H8M | Ean: 0641197088435 | UPC: 641197088435
【Package Includes】1X For Caterpillar Cat C7 C9 Fuel Injector Sleeve Installer; 1X For Caterpillar Cat C7 C9 Fuel Injector Sleeve Remover; 6X For Caterpillar Cat C7 C9 Injector Cup; 12X Orings..
【Nice Design】C7 C9 Injector Sleeve Cup Removal Installation Tool With Parts Kit Is Small Enough To Enable You To Change Even The Hard To Get At Cups At The Rear Of The Engine..
【Advantage】3126 Injector Cup Tool Will Still Stay Sharp After Using This Tool Hundreds Of Times. Easy To Use, Just Open The Cylinder Head To Complete This Job, Saving You Time And Money..
【Superior Quality】The High-Speed Steel Cone Used In The Disassembly Tool Is Of The Highest Quality Currently Available, With Anti-Rust And Anti-Corrosion Effects, Ensuring An Unparalleled Long Life..
Features
- Application C7 Injector sleeve cup removal installation tool is suitable for 3126B Cat HUEI injectors 10R-0781, fit for Caterpillar Marine Model 3126 / 3216B, for Cat C7 C9.
- Superior Quality The high-speed steel cone used in the disassembly tool is of the highest quality currently available, with anti-rust and anti-corrosion effects, ensuring an unparalleled long life.
- Package Includes 1x for Caterpillar Cat C7 C9 Fuel Injector Sleeve Installer; 1x for Caterpillar Cat C7 C9 Fuel Injector Sleeve Remover; 6x for Caterpillar Cat C7 C9 Injector Cup; 12x Orings.
- Advantage 3126 injector cup tool will still stay sharp after using this tool hundreds of times. Easy to use, just open the cylinder head to complete this job, saving you time and money.
- Nice Design C7 C9 Injector Sleeve Cup Removal Installation Tool with Parts Kit is small enough to enable you to change even the hard to get at cups at the rear of the engine.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
Dimensions: 2.76 x 13.19 x 3.15 inches
See On Amazon #13
kipa Injector Sleeve Cup Removal Installation Tool Kit F4TZ9F538A Replace for Ford 7.3L 1994-2003 1814376C1, 1833564C92, 1833564C91, 1823492C97, F8TZ9229AA, XC3Z9229AB
Asin: B083LTBG3S
Fitment:Replace For 1994-2003 Ford Powerstroke 7.3L,Navistar T444e,Dt466e And Caterpillar 3126,3126B,3126E Diesel Engines; 1994-2003 Ford F-Series 7.3L, 1994-2003 Ford E-Series 7.3L, 1994-2003 Ford Excursion7.3L.
Other Tools On The Market Do Not Have Hardened Threads On Their Removal Tool, These Tools Often Are Too Dull To Finish The Job. This Job Can Be Done With The Cylinder Heads On, Works Great.Small Enough To Enable You To Change Even The Hard To Get At Cups At The Rear Of The Engine. High Speed Steel Tap Used In The Removal Tool Is The Highest Quality Available It Will Stay Sharp And You Can Use This Tool Hundreds Of Times. Please Do Match The Oem Code And The Fitment, Directly Fit.
Package Including: 1X Fuel Injector Sleeve Installer Tool, 1X Fuel Injector Sleeve Remover Tool, 8X Fuel Injector Sleeve Cup, 48X Injector Seal And Ring Kit..
Mpn: Replace For Oe Part Number F4tz9f538a,1814376C1,1833564C92,1833564C91,1823492C97,F8tz9229aa,Xc3z9229ab.
Features
- Top Quality Injector Sleeve Cup Removal Installation Tool Kit: Well-machined, strictly tested before packing, made of sturdy, tough prime materials that Car enhanced durability and superior reliability.
- MPN: Replace for OE Part Number F4TZ9F538A,1814376C1,1833564C92,1833564C91,1823492C97,F8TZ9229AA,XC3Z9229AB
- Fitment:Replace for 1994-2003 Ford Powerstroke 7.3L,Navistar T444E,DT466E and Caterpillar 3126,3126B,3126E Diesel Engines; 1994-2003 Ford F-Series 7.3L, 1994-2003 Ford E-Series 7.3L, 1994-2003 Ford Excursion7.3L
- Package Including: 1x fuel injector sleeve installer tool, 1x fuel injector sleeve remover tool, 8x fuel injector sleeve cup, 48x injector seal and ring kit.
- Other Tools on the market Do Not Have Hardened Threads on Their Removal Tool, These Tools Often Are Too Dull to Finish the Job. This Job Can Be Done with The Cylinder Heads On, Works Great.Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine. High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available It Will Stay Sharp and You Can Use This Tool Hundreds of Times. Please do match the OEM Code and the fitment, Directly Fit
- See more on Amazon...
Brand: kipa | Manufacturer: KIPA
Dimensions: 7.28 x 1.18 x 1.18 inches
See On Amazon #14
V-SEK Fuel Injector Sleeve/Cup Remove & Install Tool Set Compatible with Ford 6.0L 6.4L Powerstroke Engines 2003-2010
Asin: B08SQT71JR | Ean: 0730074488199 | UPC: 730074488199
Material--Made Of Quality Advanced Blackening Hard Steel, Strong And Durable, Ultra Precision Design, High Precision And Hardness, Long Service Life..
Kits Include--1Pcs Fuel Injector Sleeve/Cup Remove & Install Tool Set..
Easy Use--1. Thread The Tap Part Into The Injector Cup And Turn The Bolt Down. 2. Put The Removal Into The Injector Cup And Attach Them To The Cup, Then Tighten The Nut On The Tool To Pull The Cup Out. 3. Place The Injector Cup Over The End Of The Installer, Then Place It Back Into The Injector Hole And Hit It With A Hammer Until You Hit Solid Ground..
Feature--If The Separate Tap Is Wears Or Breaks, It Can Be Replaced At Any Hardware Store At Minimal Cost Versus Replacing The Entire Tool. The Shortness Of Tool Allows This To Be Easily Done In The Engine Compartment..
Features
- Fitment--Compatible with All 6.0L & 6.4L Powerstroke Engines 2003-2010.
- Feature--If the separate tap is wears or breaks, it can be replaced at any hardware store at minimal cost versus replacing the entire tool. The shortness of tool allows this to be easily done in the engine compartment.
- Material--Made of quality advanced blackening hard steel, strong and durable, ultra precision design, high precision and hardness, long service life.
- Easy Use--1. Thread the tap part into the injector cup and turn the bolt down. 2. Put the removal into the injector cup and attach them to the cup, then tighten the nut on the tool to pull the cup out. 3. Place the injector cup over the end of the installer, then place it back into the injector hole and hit it with a hammer until you hit solid ground.
- Kits Include--1pcs Fuel Injector Sleeve/Cup Remove & Install Tool Set.
- See more on Amazon...
Brand: V-SEK | Manufacturer: V-SEK
See On Amazon #15
E-cowlboy for 6.0L/6.4L Powerstroke Fuel Injector Sleeve/Cup Remove & Install Kits for All Ford 6.0L & 6.4L Engines 2003-2010
Asin: B07XBXSCYF | Ean: 7427046748377
Benefit — The Separate Tap Could Be Replaced At Any Hardware Store At Minimal Cost If It Wears Out Or Breaks. The Shortness Of The Tool Allows This To Be Done In The Engine Compartment Very Easily..
If You're Not 100% Satisfied With Our Item, Simply Return It For A Full Refund In 30 Days. Premium Support & 18 Months' Warranty. Do Not Hesitate, You Take No Risk To Purchase In E-Cowboy!.
Easier Work — 1. Thread The Tap Portion Into The Injector Cup Then Crank The Bolt Down. 2. Put The Removal Into The Injector Cup And Holds Them Onto The Cup, Then Tighten The Nut On The Tool To Pull The Cup Out. 3. Place The Injector Cup Over The End Of The Installer Then Place It Back Into The Injector Hole And Hammer It Until You Hit Solid Ground..
High Quality — Advanced Blackening Hard Steel Process, Durability, Ultra-Precise Design Meets The Requirement Of High Precision And Hardness And A Much Longer Service Life..
Features
- Great Compatibility Fit for All Ford 6.0L and 6.4L Powerstroke Engines 2003 2004 2005 2006 2007 2008 2009 2010.
- High Quality Advanced blackening hard steel process, durability, ultra-precise design meets the requirement of high precision and hardness and a much longer service life.
- Benefit The separate tap could be replaced at any hardware store at minimal cost if it wears out or breaks. The shortness of the tool allows this to be done in the engine compartment very easily.
- Easier Work 1. Thread the Tap portion into the injector cup then crank the bolt down. 2. Put the removal into the injector cup and holds them onto the cup, then tighten the nut on the tool to pull the cup out. 3. Place the injector cup over the end of the installer then place it back into the injector hole and hammer it until you hit solid ground.
- If you're not 100% satisfied with our item, simply return it for a full refund in 30 days. Premium Support & 18 months' Warranty. Do not hesitate, you take no risk to purchase in E-cowboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #16
Injector Sleeve Cup Bore Seat Cleaning Brush Kit Fits for 1994-2018 Ford Powerstroke 6.0/6.4/6.7/7.3 Engine Caterpillar 3126 C7 C9 Replace AP0084 AP0085 3252
Asin: B0BMT84Y2N | Model: Brush | PartNumber: Brush | Ean: 0768679397301 | UPC: 768679397301
✔Clean Your Engine: Cleaning Carbon Deposits , Rust , Dirt Out Of Injector Seats, Bores, And Cups Without Damage..
✔Customer Service: All Products Are Sold After Strict Inspection. We Provide With Professional Consulting All The Time. Contact With Us If You Have Anything With Question, We'll Reply Within 16 Hours To Offer Help..
✔Easy To Use: No Skills Required, Just A Clean Tool, You Can Finish Them In Minutes..
✔High Quality: Made Of High Standard Steel Wire And Pvc Coated Handle, Practical And Durable In Use, A+ Performance In Both Function And Life Time..
Features
- Fits for: Ford 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke, Caterpillar(CAT) 3126 C7 C9 , Navistar T444E DT466 VT365 VT275 , MaxxForce 5/7/DT/9/10/N9/N10 ,GM , Chevy 6.6L , Dodge Cummins 5.9L 6.7L , 4.5L 6.8L 8.1L 9.0L HPCR , Isuzu 4HK1 6HK1 HPCR.
- High Quality: Made of high standard Steel Wire and PVC coated handle, practical and durable in use, A+ performance in both function and life time.
- Clean your Engine: Cleaning carbon deposits , rust , dirt out of injector seats, bores, and cups without damage.
- Easy to Use: No skills required, just a clean tool, you can finish them in minutes.
- Customer Service: All products are sold after strict inspection. We provide with professional consulting all the time. Contact with us if you have anything with question, we'll reply within 16 hours to offer help.
- See more on Amazon...
Brand: CULMKARI | Manufacturer: CULMKARI
Warranty: 1 year.
See On Amazon #17
PQY Fuel Injector Rebuild Spare Parts Fuel Injector Repair Service Kits Micro Filter O-ring Seals Caps + Removal Tool
Asin: B07MSCMV3R | Ean: 8011727588230
Come With A Black Removal Tool.
200 Pcs For Each Kind,Total 1200 Pcs Which Packed By A Special Transparent Plastic Collection Case And Classified..
Features
- Universal spare parts (filters,O-rings,seals/spacers,pintle caps) Total 6 kinds and one removal tool included. Which apply to most commonly used injectors
- 200 pcs for each kind,Total 1200 pcs which packed by a special transparent plastic collection case and classified.
- Come with a black removal tool
- See more on Amazon...
Brand: PQY | Manufacturer: PQY
See On Amazon #18
KIPA Injector Sleeve Cup Removal Tool & install kit for Ford Powerstroke 6.0L 2003-2010 with 8Pcs Injector Sleeves 8Pcs Injector Orings Stainless Maintenance brush Durable # 3302
Asin: B08FY2XS7K
Fitment: Replace For Ford Powerstroke 6.0L 2003-2010 Engines. All Hardware Has Been Coated For Rust Resistance As Well As A Rockwell Hardness Of Over 62 To Ensure A Long Life.
Our Design Is Engineered Towards Repeated Shop Use, And Efficiently Removing And Installing The Injector Cups . Removing And Installing The Injector Cups Should Be A Surgical Operation, Not Something Requiring Beating Cups In With Hammers And Leaving Brass Filings From Removing. Kipa Designed Our Tools With Tight Clearances, And Clean Injector Bores..
Replace For Oe Part Number 3302. Kipa Tool Utilize The Latest In Metallurgical And Coating Technology It Allows Us To Thread Our Removal Tool Into The Damaged Injector Cup Without Creating Any Filings Or Chips To Fall Into Your Cylinders. The Tool Use Bridges That Are Quickly Fastened To The Injector Mounting Holes..
A New Must Have For Any Shop Working On Powerstroke 6.0L Engines, With Brush Kit Included, This Fuel Injector Sleeve Tool Helps With The Removal And Installation Of The Injector Cups Without Damaging The Cup In The Process..
Features
- Top Quality Well-Manufactured Diesel Fuel Injector Cup Sleeve installation Removal Tool is an engine tool kit made from sturdy, tough prime fibrous Alloy materials that Trucks & Cars enhanced durability and superior reliability. Durable
- A New must have for any shop working on Powerstroke 6.0L Engines, With Brush kit included, This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process.
- Fitment: Replace for Ford Powerstroke 6.0L 2003-2010 Engines. All hardware has been coated for rust resistance as well as a rockwell hardness of over 62 to ensure a long life
- Replace for OE Part Number 3302. KIPA Tool utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. The tool use bridges that are quickly fastened to the injector mounting holes.
- Our design is engineered towards repeated shop use, and efficiently removing and installing the injector cups . Removing and installing the injector cups should be a surgical operation, not something requiring beating cups in with hammers and leaving brass filings from removing. KIPA designed our tools with tight clearances, and clean injector bores.
- See more on Amazon...
Brand: kipa | Manufacturer: KIPA
Dimensions: 1.18 x 10.63 x 1.18 inches
See On Amazon #19
V-SEK Injector Cup Nozzle Tube Remover and Installer Tool Kit Compatible with Detroit Diesel DD13 DD15 DD16 Replacement for OEM J-47388-A W470589000700 MH064002
Asin: B09TQC45BW | Model: APTOOLS-119 | PartNumber: APTOOLS-119
Quality: High Standard Heavy Duty Hard Steel With Black Oxidation Treatment, Great Strength, Durable And Corrosion Resistant, Not Easy To Deform, With Long Service Life..
Note: Remember To Drain The Coolant Before Removing The Injector Cups. If You Have Any Question About This Injector Cup Nozzle Tube Remover And Installer Tool, Don't Hesitate To Contact Us. Your Satisfaction Is Our Main Concern..
Design: Easy To Remove And Replace The Injector Cups/ Tube/ Nozzle, Saving Your Time. Jaws Will Hold The Cup From The Bottom, While The O Rings Provide Assistance On The Side As You Unscrew The Cup From The Top..
Replacement: Alternative To Oem J47388-A And W470589000700 Mh064002..
Features
- FITMENT: Compatible with Detroit Diesel / Mercedes Benz Trucks DD13, DD15, and DD16.
- REPLACEMENT: Alternative to OEM J47388-A and W470589000700 MH064002.
- QUALITY: High standard heavy duty hard steel with black oxidation treatment, great strength, durable and corrosion resistant, not easy to deform, with long service life.
- DESIGN: Easy to remove and replace the injector cups/ tube/ nozzle, saving your time. Jaws will hold the cup from the bottom, while the O rings provide assistance on the side as you unscrew the cup from the top.
- NOTE: Remember to drain the coolant before removing the injector cups. If you have any question about this injector cup nozzle tube remover and installer tool, don't hesitate to contact us. Your satisfaction is our main concern.
- See more on Amazon...
Brand: V-SEK | Manufacturer: V-SEK
See On Amazon
Looking For Something Else?
Search