RGEEK 2pcs 3D Analog Joystick Thumb Sticks Sensor Replacement for Xbox one Controller
Asin: B07V6T14KQ | Ean: 8431269709762
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compatibility:Xbox One Wired Controller/Wireless Controller.
Package Included: 2 X 3D Analog Joysticks&2 X Thumbsticks Cap.
It Will Make Your Controller Back To Life..
Needs Moderate Soldering. Professional Installation Is Highly Recommended, Instruction Or Tool Is Not Included.
Features
- A good replacement for your damaged or non-working 3D Joystick Axis & Thumb Stick
- Needs moderate soldering. Professional installation is highly recommended, instruction or tool is not included
- Compatibility:Xbox One Wired Controller/Wireless Controller
- It will make your controller back to life.
- Package included: 2 x 3D Analog Joysticks&2 x Thumbsticks Cap
- See more on Amazon...
Brand: RGEEK | Manufacturer: Coshare
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon Similar To RGEEK 2pcs 3D Analog Joystick
#1
WMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller Replacement Joystick Control Stick for PS2 Switch Joy-Con Controller
Asin: B01N59MK0U | Model: 13 | PartNumber: 13 | Ean: 0642954049386 | UPC: 642954049386
Bi-Directional 10 K Resistor, The Resistance Changes With The Rocker In A Different Direction..
Package Content: 10 Pcs Game Controller Joystick Module. Not Designed For High Current Applications..
Module Uses 5V Power Supply, The Original State Of X, Y Read Voltage Of 2.5 V. When Pressing At The Arrow Direction, Voltage Increases, Maximum Is 5 V, At Opposite Direction Of The Arrow, The Voltage Value Decreases, Minimum Is 0 V..
Do Port For Digital Output, Ao Port For Analog Output..
Features
- Game joystick module for PS2, electronic building blocks standard connector with 2.54mm pin.
- DO port for digital output, AO port for analog output.
- Bi-directional 10 k resistor, the resistance changes with the rocker in a different direction.
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Package Content: 10 pcs Game Controller Joystick Module. NOT designed for high current applications.
- See more on Amazon...
Brand: WMYCONGCONG | Manufacturer: WGCD
See On Amazon #2
Veanic Replacement Joystick Analog Thumb Stick Repair Kit for Nintendo Switch/Switch OLED Model/Switch Lite Joy-Con Controller - Include Y1.5, Cross Screwdriver, Pry Tools + 2 Thumbstick Caps
Asin: B07GM5MP6M | Ean: 6165438854473
Complete Tool Set To Finish The Repair, This Is The Perfect Solution To Make Your Controller Working Like New Again. No Need To Spend $80 For A Brand New Controller. Package Inlude The "Y1.5" Screwdriver And "+1.5" Cross Screwdriver Repair Tools, Tweezers, And Pry Tools..
We Back On Our Products! If You Are Not Satisfied With Your Purchase Within 90 Days, Please Feel Free To Contact Us. We Will Reply You Within 24 Hours..
Note: Please Calibrate The Joystick By Using Nintendo Switch Setting After Installation..
True Oem And High Quality Joystick Replacement Fixing The Joy-Con Drift, Stuttering, Blind Spots, Dead Zones, No Click, Non-Centered Issues, Bring Your Controller Back To Life..
Features
- The Joycon Replacement Joystick works for the Joycon controller of Nintendo Switch (2017 Release), Nintendo Switch lite (2019 Release) and Ninetndo Switch OLED Model (2021 Release)
- TRUE OEM and High Quality joystick replacement fixing the Joy-Con drift, stuttering, blind spots, dead zones, no click, non-centered issues, bring your controller back to life.
- Complete tool set to finish the repair, this is the perfect solution to make your controller working like new again. No need to spend $80 for a brand new controller. Package inlude the Y1.5 Screwdriver and +1.5 Cross Screwdriver repair tools, tweezers, and pry tools.
- NOTE: Please calibrate the joystick by using Nintendo Switch setting after installation.
- We back on our products! If you are not satisfied with your purchase within 90 days, please feel free to contact us. We will reply you within 24 hours.
- See more on Amazon...
Brand: Veanic | Manufacturer: Veanic
See On Amazon #3
ElecGear 4X Replacement Joystick (EL2 FU 10K) + 4X Drift Fix PCB for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation
Asin: B07R7RJ4KY | Model: EL2-FU-10K | PartNumber: EL2-FU-10K | Ean: 0682141318000 | UPC: 682141318000
[Additional Resistor] – Complicated Moving Mechanism And Daily Wear And Tear Finally Caused Drifting. Even New Sensors Cannot Be 100% Balanced. Calibrating In Controller Settings Might Not Work. We Packed 10X Correction Resistors To Solve The Potential Problem In Hardware Level. Solder One Or Two Paralleled Tiny Resistors Onto The Potentiometer At The Opposite Direction Against Drifting. It Will Help Correct 3 To 5 Degrees Drifting.
[Reminder Of Diy] – With As Many As 14 Prongs, De-Soldering And Soldering The Whole Module Takes Serious Skills. We Suggest Replacing The Potentiometers First To Solve Most Of The Joystick Problems. To Desolder The Entire Joystick Module Off Pcb By A Normal Soldering Iron, Please Take A Look At The Desoldering Kit At Product Id: B0bk7169m8.
[When To Replace] – The Analog Joystick Needs To Be Replaced When Your Controller Has The Problem Of Drifting, Creeping, Stuttering, A Blind Spot, A Dead Spot, A Dead Zone, No Reaction When Clicking, Or It Wouldn't Center After Years Of Wear And Tear. The Oem Genuine Repair Parts Ensure Accuracy And Prolong Lifespan.
[Compatibility] – The 14 Prongs Were Positioned As The Same As Alps Edition. Technically, The Whole Unit Is Interchangeable With El1 Alps 10K Used In Ps4 Controllers, And Other Brands Like ‘Scuf’ And ‘Razer Raiju Ultimate’ With Alps Joysticks Inside. However, The Trim Pot Resistor Alone Is Not Interchangeable With Alps Edition.
Features
- [EL2 FU 10K for PS4/PS3 Controller] 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10K trimmer potentiometers in orange
- [Compatibility] The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like Scuf and Razer Raiju Ultimate with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition
- [Additional Resistor] Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
- [When to replace] The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
- [Reminder of DIY] With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
See On Amazon #4
RGEEK 2 Pack 3D Analog Joystick Thumb Sticks Replacements for Nintend Switch Joy Con Controlle Switch Lite, Replacement Left/Right Repair Analog Jostick Thumb Sticks
Asin: B07MZ6PDG9 | Model: Joy-3 | PartNumber: Joy-3
Replaces Your Worn-Out Or Damaged Analog, Fix The Joycon Controller Drift Issues, Bring Your Controller Back To Life.
Note: Please Calibrate The Joystick Using Nintendo Switch Setting After Installation If It Drifts.
Replacement 3D Analog Joystick Thumb Stick Joystick Sensor Module For Nintend Switch Ns Controller Or Switch Lite.
Features
- Package Include:2 pcs x Joystick For Switch Joy Con , 4 Replacement "Y" Screws
- Replacement 3D Analog Joystick Thumb Stick Joystick Sensor Module For Nintend Switch NS Controller or Switch lite
- Replaces your worn-out or damaged analog, fix the joycon controller drift issues, bring your controller back to life
- NOTE: Please calibrate the joystick using Nintendo switch setting after installation if it drifts
- See more on Amazon...
Brand: RGEEK | Manufacturer: Coshare
See On Amazon #5
Rinbers Replacement 3D Analog Joystick Button Control Thumb Stick for Nintendo 2DS 3DS 3DS XL LL (Not for New Version)
Asin: B0789DXXHL | Ean: 6709637154066
Please Double Check The Model Number Of Your Device In Case Of Wrong Part Ordered.
90 Days Warranty, No Man-Made Scratch Or Damage When Returning Or Exchanging.
Please Install It Very Professionally, If Not, Please Do Not Try.
Only Fit For Nintendo 2Ds 3Ds 3Ds Ll Xl, Not Fit For Nintendo New 3Ds New 3Ds Xl Ll New 2Ds Xl Ll.
Features
- New Original Replacement 3D Analog Joystick Button Control Thumb Stick for Nintendo 2DS 3DS 3DS XL LL Controller with Free Opening Tool Kit
- ONLY Fit for Nintendo 2DS 3DS 3DS LL XL, Not Fit for Nintendo New 3DS New 3DS XL LL New 2DS XL LL
- Please Double Check the Model Number of Your Device in Case of Wrong Part Ordered
- Please Install it Very Professionally, if Not, Please Do Not Try
- 90 Days Warranty, No Man-Made Scratch or Damage When Returning or Exchanging
- See more on Amazon...
Brand: Rinbers | Manufacturer: Rinbers Tech
See On Amazon #6
2 Pcs Analog Stick 3D Joystick Replacement for PS4 Controller,3D Joystick Axis Analog Sensor Replacement Module, Analog Stick 3D Joystick Joystick Module Joystick Replacement Analog Stick for PS
Asin: B0BN2H3K6C
【Ideal Repaclement Part】This Controller Joystick Is Great Replacement For Damaged Or Broken One..
【Application】This 3D Joystick Is Suitable For Ps4 Controller..
【Easy Instllation】Game Joystick Is Easy To Install And Convenient To Use..
【High Quality】The Joystick Is Made Of High Quality Material, Sturdy, Not Easy To Aging And Wear-Resistant, To Ensure Maximum Strength And Durability For Long Lasting Usage. 2Pcs Ps4 Joystick.
Features
- 3D Technology 3D Analog sensor joystick for One controller, you can enjoy different gaming experience.
- HigH Quality The joystick is made of high quality material, sturdy, not easy to aging and wear-resistant, to ensure maximum strength and durability for long lasting usage. 2PCS PS4 joystick
- Ideal Repaclement Part This controller joystick is great replacement for damaged or broken one.
- Easy Instllation Game joystick is easy to install and convenient to use.
- Application This 3D joystick is suitable for PS4 controller.
- See more on Amazon...
Brand: Pilipane | Manufacturer: Pilipane
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
See On Amazon #7
3D Joystick, 2 Pcs Analog Stick 3D Joystick Replacement, Replace Damaged/Non working Controller Joystick, for PS4 Controller
Asin: B08X4Q4567 | Ean: 9399451242826, 9399451242857
【Good Replacement】A Good Replacement Part For Ps4 Controller.
【Easy To Use】Compact And Precise Design, Easy To Install And Use.
【High Quality Materials】Adopting High Quality Material, For Use.
【Replacement Parts】Replace Your Damaged Or Non Working Controller Joystick.
Features
- Exclusive design Speically designed and suitable for PS4 controller
- Replacement parts Replace your damaged or non working controller joystick
- Good replacement A good replacement part for PS4 controller
- High quality materials Adopting high quality material, for use
- Easy to use Compact and precise design, easy to install and use
- See more on Amazon...
Brand: Goshyda | Manufacturer: GOSHYDA
Dimensions: 0.39 x 0.39 x 0.39 Inches | Weight: 0.01 Pounds
See On Amazon #8
GEBSKI 10Pcs 3D Analog Joystick Thumb Arcade Stick for PSP Joystick Potentiometer Switch Console Controller Repair
Asin: B0CSSNML5B | Model: GEBSKI | PartNumber: GEBSKI | Ean: 9154574458789
Brand: GEBSKI | Manufacturer: GEBSKI
Weight: 0.11 pounds
See On Amazon
Looking For Something Else?
Search