HiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino
Asin: B07VL725T8 | Model: KKshop-Adattatore | PartNumber: KKshop-Adattatore
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Master And Slave 2-In-1 Hc 05 Module:Working Voltage 3.6V To 6V , Default Baud Rate:9600,Default Pin:1234.
6 Pin Dopunt Cable : With This Dupont Cable, You Can Easily Connect This Hc-05 Bluetooth Module To Your Arduino Board.
Button: Press The Button, The Module Enter The At Mode. At Commands Are Executed Only In At Mode..
Hc-05 Wireless Bt Module: With This Hc 05 Bluetooth Module,You Can Quickly Add The Bluetooth Feature To Your Arduino Project, And Then You Can Use Your Android Phone To Control Some Gadgets, Such As: Switch, Led..
Features
- The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module
- HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED.
- Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234
- Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.
- 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon Similar To HiLetgo 2pcs HC05 Wireless Bluetooth
#1
HC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module
Asin: B01MQKX7VP | Model: 4350280737 | PartNumber: 4350280737 | Ean: 0611138946834 | UPC: 611138946834
Rxd: The Receiver, Bluetooth Module Receives From Another Device Sent Data; Normally Connected To Other Devices Transmitting End Txd?.
Size: 37.5Mm * 16.5Mm * 4Mm(L * W * H).
Txd: Sending End, The Bluetooth Module To Send Data To Other Devices; Receiving Terminal Is Normally Connected To Other Devices Rxd.
Gnd: Power Supply Is Negative?.
Features
- VCC: positive power supply?
- GND: power supply is negative?
- RXD: the receiver, Bluetooth module receives from another device sent data; normally connected to other devices transmitting end TXD?
- TXD: sending end, the Bluetooth module to send data to other devices; receiving terminal is normally connected to other devices RXD
- Size: 37.5mm * 16.5mm * 4mm(L * W * H)
- See more on Amazon...
Brand: Newzoll | Manufacturer: Newzoll
See On Amazon #2
DSD TECH HC-05 Bluetooth Serial Pass-through Module Wireless Serial Communication with Button for Arduino
Asin: B01G9KSAF6 | Model: HC-05 | PartNumber: HC-05
Module Working Voltage 3.6 V To 6V.
Can Be Switched Via At Commands As Master Or Slave Mode , The Device Can Be Connected Via At Commands Specified.
Default Rate Of 9600,Default Pin:1234, The User Can Be Set Up.Click The Button Into At Mode.
Use The Csr Bc417 Mainstream Bluetooth Chip, Bluetooth V2.0 Spp Protocol Standards.
Features
- Bluetooth module HC-05 Master and slave Two in one module. Please note: iOS devices (iPhone) are not supported
- Use the CSR BC417 mainstream bluetooth chip, bluetooth V2.0 SPP protocol standards
- Module working voltage 3.6 V to 6V
- Default rate of 9600,default pin:1234, the user can be set up.click the button into AT MODE
- Can be switched via AT commands as master or slave mode , the device can be connected via AT commands specified
- See more on Amazon...
Brand: DSD TECH | Manufacturer: DSD TECH
Dimensions: 0.10 x 1.10 x 0.60 inches | Weight: 0.02 pounds
See On Amazon #3
HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino
Asin: B071YJG8DR | Model: 8541554474 | PartNumber: 8541554474
Master And Slave 2-In-1 Hc 05 Module:Working Voltage 3.6V To 6V , Default Baud Rate:9600,Default Pin:1234.
6 Pin Dopunt Cable : With This Dupont Cable, You Can Easily Connect This Hc-05 Bluetooth Module To Your Arduino Board.
Button: Press The Button, The Module Enter The At Mode. At Commands Are Executed Only In At Mode..
Hc-05 Wireless Bt Module: With This Hc 05 Bluetooth Module,You Can Quickly Add The Bluetooth Feature To Your Arduino Project, And Then You Can Use Your Android Phone To Control Some Gadgets, Such As: Switch, Led..
Features
- The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module
- HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED.
- Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234
- Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.
- 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
Asin: B01CKW4FSI | Model: 4328604318 | PartNumber: 4328604318
Small Size, Low Power Consumption,High Sensitivity For Send And Receive. Bluetooth Version: V2.0+Edr &Operating Voltage: 3.3V &Host Interface:Uart &Storage Temperature:-40℃~+150℃&Signal Coverage: 30Ft &Item Size: 4.3 * 1.6 * 0.7Cm &Item Weight: 3G..
Industrial Serial Port Bluetooth, Drop-In Replacement For Wired Serial Connections, Transparent Usage. You Can Use It Simply For A Serial Port Replacement To Establish Connection Between Mcu And Gps, Pc To Your Embedded Project And Etc. Computer And Peripheral Devices..
The Module Is Mainly Used For Short-Range Data Wireless Transmission,Such As Bluetooth Wireless Data Transmission,Industrial Remote Control, Telemetry,Traffic, Underground Positioning, Alarm,Smart Home Ect..
Core Module Uses Hc-06, Leads From The Module Interface Includes Vcc, Gnd, Txd, Rxd, Reserve Led Status Output Pin, The Microcontroller Can Be Judged By The Foot State Bluetooth Has Connected Key Pin Slave Invalid..
Features
- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane
- Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid.
- Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40 ~+150 &Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g.
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.01 pounds
See On Amazon #5
HiLetgo 3pcs M18 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Asin: B07W4PJ469 | Model: 3-01-1524 | PartNumber: 3-01-1524
Pin Pitch: 2.54Mm.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
DSD TECH HC-05 Classic Bluetooth 2.0 Serial Wireless Module for UNO R3 Nano (Basic Version)
Asin: B074GMQ6G3 | Model: HC-05 | PartNumber: HC-05 | Ean: 0603717227090 | UPC: 603717227090
Button: Press The Button, The Module Enter The At Mode. At Commands Are Executed Only In At Mode..
Why Choose Dsd Tech Brand: You Not Only Get High-Quality Products, You Can Also Get Technical Support And One Year Warranty. You Can Ask Any Questions About This Hc05 Module, Our Technical Team Is Waiting For You..
6 Pin Dupont Cable : With This Dupont Cable, You Can Easily Connect This Hc-05 Bluetooth Module..
Master And Slave 2-In-1 Hc 05 Module:Working Voltage 3.6V To 6V , Default Baud Rate:9600,Default Pin:1234.
Features
- HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your DIY project, and then you can use your android phone to control some gadgets, such as: switch, LED.
- Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234
- Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.
- 6 PIN Dupont Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module.
- Why choose DSD TECH brand: you not only get high-quality products, you can also get technical support and ONE YEAR WARRANTY. You can ask any questions about this HC05 module, our technical team is waiting for you.
- See more on Amazon...
Brand: DSD TECH | Manufacturer: DSD TECH
Dimensions: 0.10 x 2.00 x 1.50 inches | Weight: 0.01 Pounds
See On Amazon #7
HiLetgo 2pcs CC2540 CC2541 AT-09 Serial Wireless Module BLE 4.0 Bluetooth Module Compatible HM-10
Asin: B00WGPKZ8Y
Input Voltage: 3.3V/5V Only Needs A Set Of Power Supply..
Compatible Hm-10.
This Module Supports Uart Interface And Supports Spp Bluetooth Serial Port Protocol..
It Adopts Cc2541 Chip Of American Ti Company, Configures 256Kb Space, And Follows V4.0 Ble Bluetooth Specification..
Features
- Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible.
- It adopts CC2541 chip of American TI Company, configures 256Kb space, and follows V4.0 BLE Bluetooth specification.
- Input voltage: 3.3V/5V only needs a set of power supply.
- This module supports UART interface and supports SPP Bluetooth serial port protocol.
- Compatible HM-10
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
HiLetgo 3pcs M38 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Asin: B07WC133P4 | Model: 3-01-1526 | PartNumber: 3-01-1526
This Product Has Its Own Dual 5W Power Amplifier Circuit, And Must Not Be Connected To Another Amplifier! The Outputs Of The Two Amplifiers May Not Be Connected In Parallel Or The Negative Poles May Be Connected Together, Otherwise The Power Amplifier Chip May Be Damaged..
Support Usb Sound Card, Free Drive (Plug And Play). Connect The Module To The Computer With A Usb Cable, And The Computer Can Play Music Through The Module Amplifier Output. Audio Output: Output Left And Right Stereo Audio Signals, Which Can Be Connected To Two 2-8 Ohm, 3-5W Speakers, And 4 Euro 5W Speakers..
Features
- Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND. The maximum operating current is 5V2A. It is recommended to use a regulated 5V2A power supply for better sound quality.
- Support USB sound card, free drive (plug and play). Connect the module to the computer with a USB cable, and the computer can play music through the module amplifier output. Audio output: output left and right stereo audio signals, which can be connected to two 2-8 ohm, 3-5W speakers, and 4 Euro 5W speakers.
- This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be connected in parallel or the negative poles may be connected together, otherwise the power amplifier chip may be damaged.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
10Gtek BT-06 Wireless Bluetooth Serial RF transceiver Mini BT Module, Compatible HC-06, for UNO R3 Nano Arduino, Pack of 2
Asin: B09MYC2PR6 | Model: BT-06 Bluetooth module | PartNumber: BT-06 Bluetooth module
It Only Needs To Be Equipped With A Few Peripheral Components To Achieve Its Powerful Functions..
Suitable For(Bluetooth Wireless Data Transmission, Automated Data Acquisition System, Automobile Testing Equipment, Smart Home, Industrial Control, Etc)..
It Is Mainly Used In The Field Of Short-Distance Data Wireless Transmission. It Can Be Easily Connected To The Bluetooth Device Of The Pc, And It Can Also Be Used For Data Intercommunication Between The Two Modules, Which Can Directly Replace The Serial Port Line. (Not Supported On Ios).
Support Uart Interface, And Support Spp Bluetooth Serial Port Protocol, It Has The Advantages Of Low Cost, Small Size, Low Power Consumption, High Transceiving Sensitivity, Etc..
Features
- The BT06 Bluetooth module is designed for intelligent wireless data transmission and follows the V3.0 Bluetooth specification, compatible HC-06 module.
- Support UART interface, and support SPP Bluetooth serial port protocol, it has the advantages of low cost, small size, low power consumption, high transceiving sensitivity, etc.
- It only needs to be equipped with a few peripheral components to achieve its powerful functions.
- It is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, and it can also be used for data intercommunication between the two modules, which can directly replace the serial port line. (Not supported on IOS)
- Suitable for(Bluetooth wireless data transmission, automated data acquisition system, automobile testing equipment, smart home, industrial control, etc).
- See more on Amazon...
Brand: 10Gtek | Manufacturer: 10Gtek
See On Amazon #10
3PCS HC-06 HC 06 Bluetooth Module RF Wireless Bluetooth Transceiver Module 4 Pins for Arduino
Asin: B0B2WFZXPQ | Ean: 0701715534704 | UPC: 701715534704
Interface Level 3.3 V, The Input Voltage 3.6 ~ 6 V, Current When The Unpaired About 30 Ma, Matching After About 10 Ma, No More Than 7 V Input Voltage, Can Be Connected Directly To All Kinds Of Single Chip Microcomputer, 5 V Single Chip Can Be Connected Directly, Without Max232 Couldn't Through Max232..
Industrial Serial Port Bluetooth, Drop-In Replacement For Wired Serial Connections, Transparent Usage. You Can Use It Simply For A Serial Port Replacement To Establish Connection Between Mcu And Gps, Pc To Your Embedded Project And Etc..
The Module Is Mainly Used For Short-Range Data Wireless Transmission,Such As Bluetooth Wireless Data Transmission,Industrial Remote Control, Telemetry,Traffic, Underground Positioning, Alarm,Smart Home Ect..
Using Hc - 06 From Module , Which Leads To The Interface Includes Vcc, Gnd, Txd, Rxd, Reserved Led State Output Pin, Mcu Can State Whether The Bluetooth Is Connected Through The Foot, From Machine Key Pin Is Invalid..
Features
- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane, when the bluetooth connection has not been established by pairing the AT command set baud rate, name, password, and set the parameters of the power save. After the bluetooth connection automatically switch to passthrough mode.
- Using HC - 06 from module , which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid.
- Interface level 3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage, can be connected directly to all kinds of single chip microcomputer, 5 V single chip can be connected directly, without MAX232 couldn't through MAX232.
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
Warranty: Irrelevant attribute
See On Amazon #11
HiLetgo 3pcs M28 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Asin: B07W7YCFS1 | Model: 3-01-1525 | PartNumber: 3-01-1525
Audio Output: The Earphone Can Be Directly Connected To The 3.5Mm Audio Interface, Or It Can Be Wired For The Audio Input Of The Power Amplifier Board (The Interface L/R/Agnd Can Be Directly Wired As Shown)..
Features
- Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND.
- Audio output: The earphone can be directly connected to the 3.5mm audio interface, or it can be wired for the audio input of the power amplifier board (the interface L/R/AGND can be directly wired as shown).
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
AITIAO 3Pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module
Asin: B09MT4JJDF | Ean: 0701715496477 | UPC: 701715496477
【Serial Communication】Hc-05 Is Able To Operate In Both Master And Slave Mode. Its Communication Is Via Serial Communication Which Makes An Easy Way To Interface With Controller Or Pc. It's Ideal Replacement To Your Wired Serial Connection..
【6 Pin Dupont Cable】With This Dupont Cable, You Can Easily Connect This Hc-05 Bluetooth Module To Your Board.
【Hc-05 Wireless Bt Module】With This Hc-05 Bluetooth Module,You Can Quickly Add The Bluetooth Feature To Your Project, And Then You Can Use Your Android Phone To Control Some Gadgets, Such As: Switch, Led..
【Master And Slave 2-In-1 Hc-05 Module】Working Voltage 3.6V To 6V, Default Baud Rate: 9600,Default Pin:1234. Button: Press The Button, The Module Enter The At Mode, At Commands Are Executed Only In At Mode..
Features
- HC-05 Bluetooth Module The HC-05 module is an easy to use Bluetooth V2.0 SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.Note: The module doesn t suitable for IOS system.
- Master and Slave 2-IN-1 HC-05 Module Working Voltage 3.6V to 6V, Default baud rate: 9600,Default pin:1234. Button: Press the button, the module enter the AT mode, AT commands are executed only in AT mode.
- Serial Communication HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection.
- HC-05 Wireless BT Module with this HC-05 Bluetooth module,You can quickly add the Bluetooth feature to your project, and then you can use your android phone to control some gadgets, such as: switch, LED.
- 6 PIN Dupont Cable with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your board
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #13
HiLetgo 2pcs JDY-33 Bluetooth Module SPP3.0+BLE4.2 Dual Mode SPP SPP-C Bluetooth Compatible to HC-05 HC-06 JDY-31 JDY-30 Slave Bluetooth 3.0 (SMD)
Asin: B0CHJN492H | Model: 3-01-1840-SMD | PartNumber: 3-01-1840-SMD
Ble And Ios Or Android Connection Communication Speed Can Be Up To 4K Per Second.
It Supports 38400 Baud Rate Continuous Data Transmission, Higher Than 38400 Baud Rate Can Not Be Sent Continuously..
Spp Maximum Throughput Can Be Up To 16K Bytes/S(Android/Windows).
Features
- JDY-33 Bluetooth Module SPP3.0+BLE4.2 Dual Mode SPP SPP-C Bluetooth
- SPP maximum throughput can be up to 16K bytes/s(Android/Windows)
- BLE and IOS or Android connection communication speed can be up to 4K per second
- It supports 38400 baud rate continuous data transmission, higher than 38400 baud rate can not be sent continuously.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
ACEIRMC HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino (1pcs)
Asin: B07S1DGMBP | Ean: 0701715426207 | UPC: 701715426207
3.Hc-05 Wireless Bt Module: With This Hc 05 Bluetooth Module,You Can Quickly Add The Bluetooth Feature To Your For Arduino Project, And Then You Can Use Your Android Phone To Control Some Gadgets, Such As: Switch, Led..
5.Can Be Switched Via At Commands As Master Or Slave Mode , The Device Can Be Connected Via At Commands Specified.
4.6 Pin Dopunt Cable : With This Dupont Cable, You Can Easily Connect This Hc-05 Bluetooth Module To Your For Arduino Board.
2.Module Working Voltage 3.6 V To 6V.
Features
- 1.Use the CSR BC417 mainstream bluetooth chip, bluetooth V2.0 SPP protocol standards
- 2.Module working voltage 3.6 V to 6V
- 3.HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your for Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED.
- 4.6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your for Arduino Board
- 5.Can be switched via AT commands as master or slave mode , the device can be connected via AT commands specified
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: Organizer
Warranty: 1 year
See On Amazon #15
HiLetgo Mini ESP32 Mini 32 WiFi + Bluetooth Module
Asin: B082216QGR
Charging Ic Chip: Tp4054,.
Usb To Serial Port Chip: Ch340c.
Flash Memory Chip: 25Q32,.
Features
- Main chip:ESP 32,
- Flash memory chip: 25Q32,
- Charging IC chip: TP4054,
- USB to serial port chip: CH340C
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
Gowoops HC-02 Bluetooth Module for Arduino, Compatible with HC-05 HC-06, for PC Android iOS Smart Phone, Bluetooth 2.0 BLE 4.0
Asin: B07FNHSH1M | Model: 8541554595 | PartNumber: 8541554595 | Ean: 0705586406054 | UPC: 705586406054
★
Built-In 2.4 Ghz Antennas, Users Need To Debug The Antenna.
★
Support Transparent Transmitted With Desktop Computer Via Hc-06-Usb.
★
Support Transparent Transmitted With Android Smartphone And Notebook Computer.
★
Compatible With Hc-05 And Hc-06 Bluetooth Serial Port Module, Bluetooth 2.0 With Edr, 2 Mbps - 3 Mbps Modulation.
Features
Support transparent transmitted with iPhone, integrated with the advantage of Bluetooth 4.0 BLE (Support iPhone 4s version above, cannot connect with the phone's bluetooth directly, need a BLE bluetooth serial port assistant)
Compatible with HC-05 and HC-06 bluetooth serial port module, bluetooth 2.0 with EDR, 2 MBPS - 3 MBPS modulation
Built-in 2.4 GHz antennas, users need to debug the antenna
Support transparent transmitted with Android smartphone and notebook computer
Support transparent transmitted with desktop computer via HC-06-USB- See more on Amazon...
Brand: Gowoops | Manufacturer: Gowoops
See On Amazon
Looking For Something Else?
Search