AUTOSAVER88 2.25 Inch Black Exhaust Tip, 2.25" Inlet 2.25" Outlet 9" Overall Length Powder Coated Finish Stainless Steel Turn Down Exhaust Tips for 2.25" O.D. Tailpipe, Bolt/Clamp-On, Universal
Asin: B07X33C21P | Model: TSET-0064 | PartNumber: TSET-0064 | Ean: 0810076083179 | UPC: 810076083179
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Stylish & Pleasant-Sounding: The Black Coated Finish Would Decorate Your Car With An Elegant & Mysterious Appeal; Meanwhile, The Thicker Inner Wall Design Make Your Car Sounds Rumble And Crackle For A More Powerful And Unique Sound.
Daily Maintenance: To Make This Exhaust Tip Has A Long-Life Service - Please Sweep Away The Welding Debris, Cement, Oil, White Ash, Putty, Sand Ash Regularly To Keep The Surface Clean. We Recommend To Do Above Action Once A Month (Note: Professional Installation Would Be Highly Recommended).
Easy Installation: The Bolt/ Clamp-On Design Makes It Super Easy To Fasten To Your Exhaust Pipe With M6 Allen Key, No Drilling Or Welding Needed.
Anti-Deformation & Rustproof: Built From High-Grade Stainless Steel, Our Exhaust Tips Perfectly Decorate Your Tailpipe System & Effectively Resist Heat, Rust And Deformation For Enhanced Durability; Plus, The Functional Turn Down Angle Cut Design Helps Drain Water And Dust.
Features
- Dimension: standard 2.25" x 2.25" x 9"(inlet, outlet, and overall length); ONLY universal fit for vehicles with 2.25-inch outlet diameter exhaust pipes ( Please make sure the outlet outer diameter of your vehicle tailpipe is 2.25" before purchase)
- Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips perfectly decorate your tailpipe system & effectively resist heat, rust and deformation for enhanced durability; plus, the functional turn down angle cut design helps drain water and dust
- Stylish & pleasant-sounding: the black coated finish would decorate your car with an elegant & mysterious appeal; meanwhile, the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound
- Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen key, no drilling or welding needed
- Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended)
- See more on Amazon...
Brand: AUTOSAVER88 | Manufacturer: AUTOSAVER88
Dimensions: 2.25 x 9.00 x 2.25 Inches | Weight: 0.82 pounds
Warranty: 1 Year Warranty
See On Amazon Similar To AUTOSAVER88 2.25 Inch Black Exhaust
#1
AUTOSAVER88 Adjustable 1.0-2.5 Inch Inlet Exhaust Tip, 1"-2.5" Inlet 3.5" Outlet 6" Long Stainless Exhaust Pipe Tips, Universal for 1.5"/1.75"/2"/2.25"/2.5" Outer Diameter Tailpipe, Bolt On, Black
Asin: B07DHDFFRK | Model: ATSET003040 | PartNumber: ATSET003040 | Ean: 0810076086385 | UPC: 810076086385
Stylish & Pleasant-Sounding: Sleek Degree Rolled-Edge Angle Cut And Thicker Inner Wall Design, Make Your Car Sounds Rumble And Crackle For A More Powerful And Unique Sound, Meanwhile, The Black Powder Coated Finish Offers Your Car With A Elegant And Mysterious Appeal.
Daily Maintenance: To Make This Exhaust Tip Has A Long-Life Service - Please Sweep Away The Welding Debris, Cement, Oil, White Ash, Putty, Sand Ash Regularly To Keep The Surface Clean. We Recommend To Do Above Action Once A Month (Note: Professional Installation Would Be Highly Recommended).
Easy Installation: The Bolt/ Clamp-On Design Makes It Super Easy To Fasten To Your Exhaust Pipe With M10 Wrench, No Drilling Or Welding Needed.
Anti-Deformation & Rustproof: Built From High-Grade Stainless Steel, Our Exhaust Tips Effectively Resist Heat, Rust And Deformation To Protect & Decorate Your Tailpipe System Well; Plus, A Drainage Hole Helps Drain Water To Prevent Rust.
Features
- Dimension: standard 1.0"-2.5" x 3.5" x 6" (inlet, outlet, and overall length); universal fit for most vehicles with 1.0"/ 1.5"/1.75"/2.0"/2.25"/2.5" O.D. exhaust pipes (Please make sure the outlet outer diameter of your vehicle tailpipe is between 1.0-inch and 2.5-inch before purchase, and its 6-inch Length Meet your demand)
- Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust
- Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the black powder coated finish offers your car with a elegant and mysterious appeal
- Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed
- Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended)
- See more on Amazon...
Brand: AUTOSAVER88 | Manufacturer: AUTOSAVER88
Dimensions: 3.50 x 6.00 x 2.00 Inches | Weight: 1.20 pounds
Warranty: 1 Year Warranty
See On Amazon #2
AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Black Powdercoat Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On
Asin: B07LGRLT7J | Model: TSET-0050 | PartNumber: TSET-0050 | Ean: 0810076083070 | UPC: 810076083070
Stylish & Pleasant-Sounding: Sleek Rolled-Edge Angle Cut And Thicker Inner Wall Design Make Your Car Sounds Rumble And Crackle For A More Powerful And Unique Sound While Giving Your Car A New & Sporty Appeal.
Maintenance Tips: Please Routinely Clean Off The Debris, Cement, Oil, Dust And Dirt On The Surface Or The Interior Of The Exhaust Tips Since Good Maintenance Ensures A Longer Service Life Of Exhaust(Note: Professional Installation Would Be Highly Recommended).
Easy Installation: The Bolt/ Clamp-On Design Makes It Super Easy To Fasten To Your Exhaust Pipe With No Drilling Or Welding Needed.
Anti-Deformation & Rustproof: Built From High-Grade Stainless Steel With Black Powder Coated Finished, Our Exhaust Tips Effectively Resist Heat, Rust And Deformation To Protect & Decorate Your Tailpipe System Well; Plus, A Drainage Hole Helps Drain Water To Prevent Rust.
Features
- Dimension: standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length); universal fit for Most vehicles with 1.5"/1.75"/2.0"/2.25"/2.5" outlet diameter exhaust pipes (Please make sure the outlet outer diameter of your vehicle tailpipe is between 1.5-inch and 2.5-inch before purchase)
- Anti-deformation & rustproof: built from high-grade stainless steel with black powder coated finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust
- Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal
- Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with no drilling or welding needed
- Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust(NOTE: Professional installation would be highly recommended)
- See more on Amazon...
Brand: AUTOSAVER88 | Manufacturer: AUTOSAVER88
Dimensions: 4.00 x 9.00 x 3.00 Inches | Weight: 2.00 Pounds
Warranty: 1 Year Warranty
See On Amazon #3
Walker 52005 Exhaust Pipe 2.25" Inlet (ID) 2.25" Outlet (OD)
Asin: B001AGSVA4 | Model: 52005 | PartNumber: 52005 | Ean: 0086387520058 | UPC: 086387520058
Flexible Solution -- Offered In A Variety Of Lengths And Diameters And Features Inlet Diameter (I.D.) – Outlet Diameter (O.D.) Connection; May Require Fabrication And Welding; See Product Specifications For More Information.
Compatibility -- Ideal For Weld Or Clamp Installations.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Inhibits Rust -- Durable Aluminized-Steel Construction To Inhibit Corrosion And Promote Performance.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Universal fit, check product dimensions
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- FLEXIBLE SOLUTION -- Offered in a variety of lengths and diameters and features Inlet Diameter (I.D.) Outlet Diameter (O.D.) connection; may require fabrication and welding; see product specifications for more information
- INHIBITS RUST -- Durable aluminized-steel construction to inhibit corrosion and promote performance
- COMPATIBILITY -- Ideal for weld or clamp installations
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Tenneco (Dynomax, Walker, Thrush)
Dimensions: 3.00 x 18.00 x 3.00 inches | Weight: 1.70 pounds
Warranty: No Warranty
See On Amazon #4
Walker 41962 Exhaust Reduction Pipe 2.5" Inlet (ID) 2.25" Outlet (OD)
Asin: B000C94AE6 | Model: 41962 | PartNumber: 41962 | Ean: 0086387419628 | UPC: 086387419628
Offered In A Variety Of Styles And Sizes For Your Installation Needs.
Walker Supplies All Of The Accessories You Need To Do The Complete Exhaust Job.
For Use In Connecting Exhaust Pipe And/Or Tubing.
Burr-Free Construction For Proper Fitment.
Manufactured From Aluminized Steel For Durability.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Universal fit, check product dimensions
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- Offered in a variety of styles and sizes for your installation needs
- Manufactured from aluminized steel for durability
- For use in connecting exhaust pipe and/or tubing
- Burr-free construction for proper fitment
- Walker supplies all of the accessories you need to do the complete exhaust job
- See more on Amazon...
Brand: Walker | Manufacturer: Tenneco (Dynomax, Walker, Thrush)
Dimensions: 3.00 x 5.00 x 3.00 inches | Weight: 0.50 pounds
Warranty: No Warranty
See On Amazon #5
AUTOSAVER88 Stainless Steel 2.25 Inch Exhaust Y Pipe, 2.25" Single to 2.25" Dual Exhaust Adapter Connector, 10" Overall Length, Universal 2 1/4 Inch Y-pipe, Weld-on
Asin: B09ZXZNYN9 | Model: ATSETET00010214 | PartNumber: ATSETET00010214 | Ean: 0810076081212 | UPC: 810076081212
Between Dual Pipes: 1 3/5" (1.6"), Outside To Outside Of Dual Pipes: 6 2/5" (6.4").
Universal Fitment For Vehicle, Weld-On Installation, Please Measure To Ensure Proper Fit Before Purchase (Note: Professional Installation Would Be Highly Recommended).
Made Of High-Grade Stainless Steel For High Heat And Rust Resistance; Dual Exhausts Design For Channeling Out The Emitted Gas From The Engine Of The Vehicle Faster.
Center To Center Of Dual Pipes: 4" ; Overall Length: 10", Overall Width: Approx.6.75" , Thickness: Approx. 2.5".
Features
- Single inside diameter: 2 1/4"(2.25"), single outside diameter: 2 7/20"(2.35"); dual inside diameter: 2 1/4"(2.25"), dual outside diameter: 2 7/20"(2.35")
- Center to center of dual pipes: 4 ; overall length: 10, overall width: approx.6.75 , thickness: approx. 2.5
- Between dual pipes: 1 3/5 (1.6), outside to outside of Dual Pipes: 6 2/5 (6.4)
- Made of high-grade stainless steel for high heat and rust resistance; dual exhausts design for channeling out the emitted gas from the engine of the vehicle faster
- Universal fitment for vehicle, weld-on installation, please measure to ensure proper fit before purchase (NOTE: Professional installation would be highly recommended)
- See more on Amazon...
Brand: AUTOSAVER88 | Manufacturer: AUTOSAVER88
Warranty: 1 Year Warranty
See On Amazon #6
AUTOSAVER88 2.25 Inch Exhaust X Pipe, 2.25" Dual Inlet/Outlet 12" Long Stainless Steel Universal Exhaust Pipe Adapter Connector for Smoother Exhaust, Dual 2 1/4 Inch Crossover X Pipe, Weld-On
Asin: B09ZXXZPRR | Model: ATSETET00878809 | PartNumber: ATSETET00878809 | Ean: 0810076081236 | UPC: 810076081236
Anti-Rust & Heat-Resistant: Made Of High-Grade Stainless Steel, 1.25Mm(0.05") Thickness Wall, Strong Anti-Corrosive, High Temperature Resistance And Anti-Rust.
12-Month Warranty: 100% Satisfaction Guaranteed! Provided Direct Replacement For Your Damaged Item.
Weld-On Installation Design (Note: Professional Installation Would Be Highly Recommended).
Unique X Shape Design: Designed To Channel Out The Emitted Gas Uniformly, Dual Exhaust Connector, Makes Exhaust Gas Merge At The Crossover Point And Reduces Sound.
Features
- Dimension: Inside diameter - 2 1/4" (2.25"), Outside diameter - 2 7/20" (2.35"), Center to center of dual pipes - 4.1", Overall length - 12", Between dual pipes - 1.63", Outside to outside of Dual Pipes: 6 2/5" (6.4") (please measure your pipe diameter before purchase)
- Unique X shape design: Designed to channel out the emitted gas uniformly, dual exhaust connector, makes exhaust gas merge at the crossover point and reduces sound
- Anti-rust & heat-resistant: Made of high-grade stainless steel, 1.25mm(0.05) thickness wall, strong anti-corrosive, high temperature resistance and anti-rust
- Weld-On installation design (Note: Professional installation would be highly recommended)
- 12-Month warranty: 100% satisfaction guaranteed! Provided direct replacement for your damaged item
- See more on Amazon...
Brand: AUTOSAVER88 | Manufacturer: AUTOSAVER88
Warranty: 1 Year Warranty
See On Amazon #7
LCGP 2.25 Inch Inlet Exhaust Tip,2.25" x 3.5" x 12" Polished Exhaust Tailpipe Tip for Truck With Bolt On Design
Asin: B0B6V7MZNG | Model: No | PartNumber: No
Polished Surface Treatment And Rolled Edge & Angled Cut Design..
Easy To Install: Bolt On Installation,Not Easy To Screw Off. Note: If You Think It Isn’T Tight Enough, Additional Welding Will Be A Nice Safeguard..
There Are A Small Hole On Bottom Of Tip To Drain Water, Not Easy To Accumulate Water And Prevent Rust..
Made Of High Quality Stainless Steel With Strong Anti-Corrosive, Never Rusty..
Features
- 2.25 inch inside diameter inlet, 3.5 inch outside diameter outlet, 12 inch overall length.
- Made of High quality Stainless steel with strong anti-corrosive, Never Rusty.
- Polished surface treatment and Rolled Edge & Angled Cut design.
- There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust.
- Easy to install: Bolt On Installation,not easy to screw off. Note: If you think it isn t tight enough, additional welding will be a nice safeguard.
- See more on Amazon...
Brand: LCGP | Manufacturer: LCGP
Warranty: 90-day manufacturer's warranty from date of purchase.
See On Amazon #8
EVIL ENERGY 2.25" Resonator Muffler Stainless Steel (2.25inch Inlet/Outlet, 13.8" Length)
Asin: B092VPN59Y | Model: EV01264S2.25 | PartNumber: EV01264S2.25
[Material] 201 Stainless Steel Housing, 430 Stainless Steel Inner Mesh..
[Installation] Can Be Installed Using Welding Or Exhaust Clamp. Professional Installation Is Highly Recommended..
[Effect] Straight-Through Exhaust Muffler Is Densely Covered With Fiberglass To Absorb Sound And Giving A Low, Deep Tone. Double-Layer Stainless Steel Design Helps Reduce Vibration And Absorb Sound..
[Application] Universal Fits 2.25" Exhaust Pipes As Long As There Is Sufficient Installation Space..
Features
- [Size] OD of inlet/outlet: 2.25 inch; Overall length: 13.77 inch; Body diameter: 3.98 inch.
- [Application] Universal fits 2.25 exhaust pipes as long as there is sufficient installation space.
- [Material] 201 stainless steel housing, 430 stainless steel inner mesh.
- [Effect] Straight-through exhaust muffler is densely covered with fiberglass to absorb sound and giving a low, deep tone. Double-layer stainless steel design helps reduce vibration and absorb sound.
- [Installation] Can be installed using welding or exhaust clamp. Professional installation is highly recommended.
- See more on Amazon...
Brand: EVIL ENERGY | Manufacturer: Speedwow Tuning
See On Amazon #9
Exhaust Flex Spring Joint 2.25 In Dia Inlet 2.25 In Outlet 6.00 In Long WFSPJ225-225-6 Wesdon Spring Flanges
Asin: B07963X387 | Ean: 0685642976670 | UPC: 685642976670
Includes (1) One Heavy 16 Gauge Stainless Steel 2.25 In Dia Inlet 2.25 In Outlet 6.00 In Long.
Universal (Please Measure To Make Sure It Fits Your Car Or Truck).
Fits A 2.25 Exhaust Pipe Replaces Worn Flex Pipes.
2.25 Inlet 2.25 Outlet.
Features
- Exhaust Flex Spring Joint 2.25 In Dia Inlet 2.25 In Outlet 6.00 In Long
- 2.25 Inlet 2.25 Outlet
- Includes (1) One heavy 16 gauge Stainless Steel 2.25 In Dia Inlet 2.25 In Outlet 6.00 In Long
- Fits a 2.25 Exhaust Pipe Replaces Worn Flex Pipes
- Universal (Please measure to make sure it fits your Car or Truck)
- See more on Amazon...
Brand: WESDON | Manufacturer: Wesdon
Dimensions: 3.00 x 6.00 x 3.00 Inches
See On Amazon #10
A-KARCK Turn Down Exhaust Tip 2.25" Inlet, Polished Tailpipe Tip with 2.25" Inlet & Outlet 9" Overall Length, Stainless Steel Structure for High Temperature Resistance
Asin: B0B934X9P3 | Model: 2409TDB | PartNumber: 2409TDB
Bright Appearance: Made Of Stainless Steel, Precision Polished. Resistant To High Temperatures And Corrosion, Perfectly Withstands The High Temperatures Of Exhaust..
Measure Before Buying: Measure Your Existing Exhaust Pipe To Make Sure It Is 2.25" Od. Fits 2.25" Outer Diameter Exhaust Pipe Only..
Unique Design: The Pure And Elegant Silver Exterior Can Perfectly Decorate Your Vehicle. Replace Your Rusted Tailpipes And Look Different..
Easy Installation: Simply Slide The Tip Onto The Exhaust Pipe And Tighten The Bolt. Installation Is Complete With Just A Wrench..
Features
- 2.25" ID EXHAUST TIP: Inlet diameter - 2.25 inch, Outlet diameter - 2.25 inch, Overall length - 9 inch. Universal fits 2.25" outer diameter existing tailpipe.
- EASY INSTALLATION: Simply slide the tip onto the exhaust pipe and tighten the bolt. Installation is complete with just a wrench.
- BRIGHT APPEARANCE: Made of stainless steel, precision polished. Resistant to high temperatures and corrosion, perfectly withstands the high temperatures of exhaust.
- UNIQUE DESIGN: The pure and elegant silver exterior can perfectly decorate your vehicle. Replace your rusted tailpipes and look different.
- MEASURE BEFORE BUYING: Measure your existing exhaust pipe to make sure it is 2.25 OD. Fits 2.25 outer diameter exhaust pipe only.
- See more on Amazon...
Brand: A-KARCK | Manufacturer: A-KARCK
Dimensions: 2.25 x 9.00 x 2.25 inches
Warranty: 1 year warranty
See On Amazon #11
JEGS 2.25 OD Aluminized Exhaust Tubing | 4-Feet Length | 16-Gauge | Seam Welded | Straight | Heavy-Duty Construction
Asin: B078WJGHZ2 | Ean: 0889944039730 | UPC: 889944039730
Heavy-Duty 16-Gauge Aluminized Material For Strength And Longer Life.
Efficient Packaging To Save On Non-Box And Oversize Fees.
2.25” Outside Diameter For Common Exhaust Systems.
Seam Welded Construction To Maintain Od/Id Size Integrity For Easier Mandrel Bending.
Features
- COMPLETE YOUR EXHAUST PROJECT with this 4 foot length section of pipe
- SEAM WELDED CONSTRUCTION to maintain OD/ID size integrity for easier mandrel bending
- HEAVY-DUTY 16-GAUGE ALUMINIZED MATERIAL for strength and longer life
- 2.25 OUTSIDE DIAMETER for common exhaust systems
- EFFICIENT PACKAGING to save on non-box and oversize fees
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 3.25 x 48.00 x 3.25 inches | Weight: 7.00 pounds
See On Amazon #12
Upower 2.25" Inlet/Outlet Exhaust Muffler 18" Body Length 22" Overall Length 2 1/4 inch Resonator Muffler Fits 50251FLT Weld on
Asin: B074V7CVTJ
Stainless Steel Construction For Lifelong Protection.
There Is 1 Year Warranty For Every Item. Before Purchasing, Please Make Sure The Brand Logo Is "Upower"..
Continuous Roving Glass Pack Technology Absorbs Unwanted Interior Resonance.
100% Welded Design For Long-Lasting Durability.
Features
- Inlet: 2.25" inner diameter - Outlet: 2.25" inner diameter - Overall Length: 22" - Body length: 18" - Body type: 3.5" round - Style: Directional Flow, Non-Reversible
- 100% welded design for long-lasting durability
- Stainless steel construction for lifelong protection
- Continuous Roving Glass Pack technology absorbs unwanted interior resonance
- There is 1 year warranty for every item. Before purchasing, please make sure the Brand Logo is Upower.
- See more on Amazon...
Brand: Upower | Manufacturer: partsquare
Dimensions: 18.00 x 22.00 x 3.50 inches
Warranty: 1 Year
See On Amazon #13
PQY Universal 2.25 Inch Stainless Steel Exhaust Pipe Kit
Asin: B096B5VJSN | Ean: 0784136202759 | UPC: 784136202759
No Installation Instruction Included ,Professional Installation Is Recommended..
We Offer 12Month's Warranty For It ,If You Have Any Problem ,Please Contact Us ,We Will Respond In 24 Hours Except Weekends And Holidays..
2.25” Tube Outer Diameter ..
Features
- The pipe is made of high quality 304 Stainless Steel .
- 2.25 Tube Outer Diameter .
- No installation instruction included ,professional installation is recommended.
- We offer 12month's warranty for it ,if you have any problem ,please contact us ,we will respond in 24 hours except weekends and holidays.
- See more on Amazon...
Brand: PQY | Manufacturer: PQYRACING
See On Amazon #14
A-KARCK Single Chamber Muffler 2.25" Center Inlet 2.25" Center Outlet, 13" Overall Length Aluminized Steel Aggressive Sound Race Muffler (2 Pcs)
Asin: B0B5CYS457 | Model: M-2413 | PartNumber: M-2413
Aluminized Steel Construction: Corrosion Resistance And Heat Resistance. With Protection Features For Maximum Durability..
Universal Fit: Fit For Almost Of Vehicles, And Easy To Welding For Installation. You Can Also Clamp It With Suitable Clamps..
Dimensions: Center 2.25" Inlet & 2.25" Outlet, 13" Overall Length, 7" Body Length, 9" Body Width.
Single Chamber: Optimized Design With Internal Baffles For Aggressive Sound Levels. "Inlet" Mark Prompt To Prevent Wrong Installation..
Features
- Noise Reduction: Designed to create deep throat swelling and muffle exhaust noise. Aerodynamic flow direction, as far as possible without obstructing the exhaust flow.
- Single Chamber: Optimized design with internal baffles for aggressive sound levels. Inlet mark prompt to prevent wrong installation.
- Aluminized Steel Construction: Corrosion resistance and heat resistance. With protection features for maximum durability.
- Dimensions: Center 2.25 Inlet & 2.25 Outlet, 13 Overall Length, 7 Body Length, 9 Body Width
- Universal Fit: Fit for almost of vehicles, and easy to welding for installation. You can also clamp it with suitable clamps.
- See more on Amazon...
Brand: A-KARCK | Manufacturer: A-KARCK
Dimensions: 2.25 x 13.00 x 9.00 Inches
Warranty: 1 year
See On Amazon #15
DNA Motoring ZTL-225RAW 16Pcs 2.25 Inches OD DIY Custom Mandrel Exhaust Pipe Kit Straight & Bend
Asin: B081R3V7HN | Model: ZTL-225RAW | PartNumber: ZTL-225RAW | Ean: 0194286051969 | UPC: 194286051969
Slip Fit Joints To Provide Easiest Fabrication.
2.25" Od Piping.
18-Gauge Piping Walls.
I.E. Maximizing Smoothest High Exhaust Air Flow Rate.
Features
- Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
- i.e. Maximizing Smoothest High Exhaust Air Flow Rate
- Slip Fit Joints to Provide Easiest Fabrication
- 18-Gauge Piping Walls
- 2.25 OD Piping
- See more on Amazon...
Brand: DNA MOTORING | Manufacturer: DNA Motoring
Warranty: Please contact the seller directly for warranty information for this product.
See On Amazon #16
A-KARCK 2.25" Inlet Exhaust Resonator, Muffler Resonator 2.25" Inlet 2.25" Outlet 14'' Overall Length Stainless Steel
Asin: B0CHFB77NL
Straight Through Design Allows For The Highest Flow Possible..
Designed To Dampen Exhaust Noise And Clear Up The Rasp..
Stainless Steel Material Provides Long-Lasting Durability..
Tig Welding For Great Construction.
Features
- 2.25" inner diameter inlet, 2.25" diameter outlet,13.8" overall length.
- TIG Welding for great construction
- Straight through design allows for the highest flow possible.
- Stainless steel material provides long-lasting durability.
- Designed to dampen exhaust noise and clear up the rasp.
- See more on Amazon...
Brand: A-KARCK | Manufacturer: A-KARCK
See On Amazon #17
LCGP 2.25 Inch Inlet Exhaust Tip 2.25" x 3.5" x 12" Black Exhaust Tailpipe, Universal for Car Truck with Bolt On Design
Asin: B0B6V7VNNR | Model: No | PartNumber: No
Black Powder Coated Surface Treatment, High Temperature Resistance, Not Easy To Scratch & Fall Off..
Easy To Install: Bolt On Installation,Not Easy To Screw Off. Note: If You Think It Isn’T Tight Enough, Additional Welding Will Be A Nice Safeguard..
There Are A Small Hole On Bottom Of Tip To Drain Water, Not Easy To Accumulate Water And Prevent Rust..
High Quality Stainless Steel Infused With Anti-Corrosive Agents That Prevent Your Exhaust Tip From Rusting..
Features
- 2.25 inch inside diameter inlet, 3.5 inch outside diameter outlet, 12 inch overall length.
- High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting.
- Black Powder Coated surface treatment, high temperature resistance, not easy to scratch & fall off.
- There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust.
- Easy to install: Bolt On Installation,not easy to screw off. Note: If you think it isn t tight enough, additional welding will be a nice safeguard.
- See more on Amazon...
Brand: LCGP | Manufacturer: LCGP
Warranty: 90-day manufacturer's warranty from date of purchase.
See On Amazon #18
Walker 42477 Exhaust Pipe 2.25" Inlet (OD) 2.25" Outlet (ID) for Ford F-150
Asin: B000C91B4S | Model: 42477 | PartNumber: 42477 | Ean: 0086387424776 | UPC: 086387424776
Inhibits Corrosion -- Durable Aluminized-Steel Construction To Inhibit Corrosion And Promote Performance.
Available In Different Sizes -- Offered In A Variety Of Lengths And Diameters And Features The Appropriate Inlet Diameter (I.D.) - Outlet Diameter (O.D.) Connection; See Product Specifications For More Information.
Oe-Style Performance -- Direct-Fit Design Is Fixture Checked To Ensure A Precise Fit That Performs Like Original Equipment.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Easy To Install -- Manufactured With Precision Bends And Oe-Style Routings, Hangers And Connectors For Easy Installation (Where Applicable).
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 1975-1975 Dodge D100; 1990-1990 Dodge D150; 1991-1991 Dodge D150; 1975-1975 Dodge D200; 1990-1990 Dodge D250; 1991-1991 Dodge D250; 1975-1975 Dodge D300; 1990-1990 Dodge D350; 1991-1991 Dodge D350; 1990-1990 Dodge W250; 1991-1991 Dodg
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance
- EASY TO INSTALL -- Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE -- Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) - Outlet Diameter (O.D.) connection; see product specifications for more information
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 2.00 x 18.00 x 2.00 Inches | Weight: 2.00 Pounds
Warranty: No Warranty
See On Amazon #19
Walker 41955 Exhaust Reduction Pipe 2.25" Inlet (ID) 2" Outlet (OD)
Asin: B000C94AGY | Model: 41955 | PartNumber: 41955 | Ean: 0086387419550 | UPC: 086387419550
Offered In A Variety Of Styles And Sizes For Your Installation Needs.
Walker Supplies All Of The Accessories You Need To Do The Complete Exhaust Job.
For Use In Connecting Exhaust Pipe And/Or Tubing.
Burr-Free Construction For Proper Fitment.
Manufactured From Aluminized Steel For Durability.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 1974-1974 Dodge D100 Pickup; 1974-1974 Dodge D200 Pickup; 1974-1974 Dodge D300 Pickup; 1984-1984 Ford E-150 Econoline; 1985-1985 Ford E-150 Econoline; 1986-1986 Ford E-150 Econoline; 1984-1984 Ford E-150 Econoline Club Wagon; 1985-198
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- Offered in a variety of styles and sizes for your installation needs
- Manufactured from aluminized steel for durability
- For use in connecting exhaust pipe and/or tubing
- Burr-free construction for proper fitment
- Walker supplies all of the accessories you need to do the complete exhaust job
- See more on Amazon...
Brand: Walker | Manufacturer: Tenneco (Dynomax, Walker, Thrush)
Dimensions: 2.00 x 6.00 x 2.00 inches
Warranty: No Warranty
See On Amazon
Looking For Something Else?
Search