DasMarine Stainless Steel 12" x 9" Surface Mount Beer Drip Tray with Brass Drain/Nipple/Nut
Asin: B07X9XWR25 | Ean: 0733810553083 | UPC: 733810553083
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Thread Size:】Center Mounted Solid Brass Drain Can Be Attached To A 1/2" I.D. Drain Line And Comes With A Threaded Drain Nipple And Hex Nut.
【Package Included:】1 X 12"L X 9"W Mount Drip Tray, With Drain.
【Dimensions:】12"L X 9"W X 3/4"T..
【Function:】Drip Tray For Your Single Tap Draft Beer System, Collects Faucet Drips And Pint Glass Run-Off..
Features
- Material: Heavy duty, 304 grade sanitary stainless steel
- Function: Drip tray for your single tap draft beer system, collects faucet drips and pint glass run-off.
- Thread Size: Center mounted solid brass drain can be attached to a 1/2 I.D. drain line and comes with a threaded drain nipple and hex nut
- Dimensions: 12L x 9W x 3/4T.
- Package Included: 1 x 12L x 9W Mount Drip Tray, With Drain
- See more on Amazon...
Brand: DasMarine
Dimensions: 0.79 x 0.79 x 0.79 Inches
See On Amazon Similar To DasMarine Stainless Steel 12 x
#1
DasMarine 2 Pcs Boat Flag Pole, 15.5 Stainless Steel Boat Flagpole Holder Rail Mount Boat Pulpit Staff 7/8" to 1" for Yacht Marine
Asin: B07YB4FB7M | Ean: 0733810536734 | UPC: 733810536734
Easy Installation: Flag Poles Easily Mount To Rails.
Complete Set: Includes 2 Stainless Steel Flag Poles.
Compact Size: Diameter 1/2 Inch, Length 15.5 Inches.
Durable Construction: Made Of Plastic And Stainless Steel.
Features
- Adjustable Fit: Fits rails 22mm to 25mm diameter
- Durable Construction: Made of plastic and stainless steel
- Easy Installation: Flag poles easily mount to rails
- Compact Size: Diameter 1/2 inch, Length 15.5 inches
- Complete Set: Includes 2 stainless steel flag poles
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 0.00 x 15.50 x 0.50 Inches
See On Amazon #2
DasMarine D-Ring Tie Downs, 1/4" D-Rings Anchor Lashing Ring for Loads on Trailers Trucks RV Campers Vans ATV SUV Boats Motorcycles etc Vehicles, 1200 Pound Capacity per Ring (12)
Asin: B07KJDJGXX | Ean: 0733810488941 | UPC: 733810488941
Widely Uses: The Lashing Rings Is Multipurpose, Designed To Be Surface Mounted And Add A Convenient Anchor Point For Cargo Straps, Ropes Or Cables, Bungee Cords. Widely Uses As Tie-Down Anchors Securing On Trailers Trucks Rv Campers Vans Atv Suv Boats Motorcycles Pickups Powersport, Kayaks Etc Vehicles; Also Great For Any Type Of Hooks Hooks In Garages, Warehouses, And Workshops Deliveries Etc.
Package Included: 12 X 1/4" D-Ring Tie Down Anchors.
Easy Installation: The Surface Mounted Tie Down D Rings Just Need Two 12# Hexhead Bolts(Package Not Including Bolts) And Basic Hardware On Any Surface Or Floor.
Anti-Corrosion And Anti-Rust: The Tie Down Rings Protected By Zinc-Plated Finish To Prevent Corrosion And Rust.
Features
- 12Pack high quality D ring tie down with mounting brackets, made by heavy duty solid steel, enough strong and durable, load up to 1,200 lbs per D-Ring (Mouting bolts are not included, #12 Hexhead needed)
- Anti-corrosion and Anti-rust: The tie down rings protected by zinc-plated finish to prevent corrosion and rust
- Widely uses: The lashing rings is multipurpose, designed to be surface mounted and add a convenient anchor point for cargo straps, ropes or cables, bungee cords. Widely uses as tie-down anchors securing on trailers trucks RV campers Vans ATV SUV boats motorcycles pickups powersport, kayaks etc vehicles; Also great for any type of hooks hooks in garages, warehouses, and workshops deliveries etc
- Easy installation: The surface mounted tie down D rings just need two 12# Hexhead bolts(package not including bolts) and basic hardware on any surface or floor
- Package Included: 12 x 1/4 D-Ring Tie Down Anchors
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 0.79 x 0.79 x 0.79 Inches
See On Amazon #3
DasMarine 12V Automatic Submersible Boat Bilge Water Pump 1100GPH Built-in Auto Float Switch (1100GPH)
Asin: B07HQL4SZ8 | Ean: 0615200920722, 0615200920661 | UPC: 615200920722, 615200920661
★ Long Life Motor :Water Cooled Motors For Long Life, With Anti Airlock Design And Moisture Tight Seals.Heavy Duty Motors With Stainless Steel Shafts And Tough Thermoplastic Bodies..
★ Package Included: 1 X 1100Gph Automatic Submersible Boat Bilge Water Pump.
★ Durable: All (Auto) Bilge Pumps Are Built With Compact, Rust And Corrosion Protected Stainless Steel Shaft, High-Impact Durable And Thermoplastic Abs Plastic Housing..
★ Built-In Float Switch: No Float Switch Required.Pump Turns On When Water Level Rises & Shuts Off When Water Is Removed. Snap-Off Strainer For Easy Cleaning.
Features
- Specification: Flow Rate: 1100GPH; Voltage: 12V; Current: 3.8A; Head: 4.0M, Wire Lead: 1M, Outlet Dia: 28.5mm(1-1/8"), Dimension: 15*8*10CM
- Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning
- Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
- Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing.
- Package Included: 1 x 1100GPH Automatic Submersible Boat Bilge Water Pump
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 3.40 x 6.40 x 4.60 inches | Weight: 1.20 Pounds
See On Amazon #4
DasMarine Beer Drip Trays, 12" x 7" Stainless Steel Kegerator Drip Tray Surface Mount No Drain Keg Drip Tray for Beverage Drink Dispenser
Asin: B07X9XWR26 | Model: NO-0001 | PartNumber: NO-0001 | Ean: 0733810572022, 0733810553069 | UPC: 733810553069, 733810572022
【Easy To Clean & Install】Removable, Easy To Clean Drain Grate, Flat Louvers, Dump It Out In The Sink And Rinse With Water Or Put It In The Dishwasher.
【Package Included】1Pc 12"L X 7"W Surface Mount Drip Tray, No Drain.
【Dimensions】Beer Drip Tray Size Is 12"L X 7"W X 3/4"H, The Diameter Of Pipe/Nut Entry Point Is 4.7'' And It Is 2.1'' Deep..
【Function】Drip Tray For Your Single Tap Draft Beer System, Collects Faucet Drips And Pint Glass Run-Off..
Features
- Material Heavy duty, 304 grade sanitary stainless steel drip tray.
- Function Drip tray for your single tap draft beer system, collects faucet drips and pint glass run-off.
- Easy To Clean & Install Removable, easy to clean drain grate, flat louvers, dump it out in the sink and rinse with water or put it in the dishwasher
- Dimensions Beer drip tray size is 12L x 7W x 3/4H, the diameter of pipe/nut entry point is 4.7'' and it is 2.1'' deep.
- Package Included 1PC 12L x 7W Surface Mount Drip Tray, No Drain
- See more on Amazon...
Brand: DasMarine
Dimensions: 0.79 x 0.79 x 0.79 inches
See On Amazon #5
DasMarine 3000 GPH 12v Boat Marine Plumbing Electric Bilge Pump 1 1/2"(40MM) outlet 12 AMP 15 AMP Fuse
Asin: B07KP791D2 | Ean: 0733810488996 | UPC: 733810488996
【Efficient】: Quick Release Strainer For Easy Maintenance; Low Current Draw And Offers High Capacity Output.
【Package Included】: 1 X 12V 3000 Gph Bilge Pump； 12V; 12Amp; 40Mm Id Hose.
【Safe】:Ignition Protection To Protect The Pump Against High Current; Water/Moisture Tight Seals.
【Great Quality】:Rustproof And Corrosion Resistant; Stainless Steel Shaft; High-Impact Durable Plastic Housing.
Features
- Heavy Duty : fully submersible electric pump; Tough, efficient, long life motor
- Great Quality :Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing
- Efficient : Quick release strainer for easy maintenance; low current draw and offers high capacity output
- Safe :Ignition protection to protect the pump against high current; Water/moisture tight seals
- Package included : 1 x 12v 3000 GPH Bilge Pump 12V; 12AMP; 40MM ID HOSE
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 7.00 x 6.00 x 6.00 Inches
See On Amazon #6
DasMarine 12V Automatic Submersible Boat Bilge Water Pump 760GPH Built-in Auto Float Switch (760GPH)
Asin: B07HQBN2NY | Ean: 0615200920654 | UPC: 615200920654
★ Long Life Motor :Water Cooled Motors For Long Life, With Anti Airlock Design And Moisture Tight Seals.Heavy Duty Motors With Stainless Steel Shafts And Tough Thermoplastic Bodies..
★ Package Included: 1 X 760Gph Automatic Submersible Boat Bilge Water Pump.
★ Durable: All (Auto) Bilge Pumps Are Built With Compact, Rust And Corrosion Protected Stainless Steel Shaft, High-Impact Durable And Thermoplastic Abs Plastic Housing..
★ Built-In Float Switch: No Float Switch Required.Pump Turns On When Water Level Rises & Shuts Off When Water Is Removed. Snap-Off Strainer For Easy Cleaning.
Features
- Specification: Flow Rate: 760GPH; Voltage: 12V; Current: 3.0A; Head: 3.0M, Wire Lead: 1M, Outlet Dia: 19mm(3/4"), Dimension: 15*8*10CM
- Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning
- Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
- Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing.
- Package Included: 1 x 760GPH Automatic Submersible Boat Bilge Water Pump
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 3.70 x 7.00 x 4.80 Inches | Weight: 1.19 pounds
See On Amazon #7
DasMarine Fuel Line Assembly 5/16" Inner Dia 7/16" Outer Dia Universal Fuel Line with Primer Bulb Steel Hose Clamps for Outboard Marine Boat Motor
Asin: B08HD9W2RR | Ean: 0617256024911 | UPC: 617256024911
【Convenient】Dual Check Valves Allow Priming In Multiple Orientations..
【Package Included】1 X Fuel Line Assembly.
【Widely Use】Multi-Layer Low-Permeation Primer Bulb,Work Great For Boats, Rvs, Tractors, And Caravans..
【High-Quality Material】Premium Quality Rubber Bulb With Rubber Line Hose, Stainless Steel Clamps. Fuel Hose Resists Leaking And Hardening..
Features
- Specifications Universal Fuel Line,Hose inner diameter: 5/16" (8mm), outer diameter: 7/16" (12mm).
- High-Quality Material Premium quality rubber bulb with rubber line hose, Stainless steel clamps. Fuel hose resists leaking and hardening.
- Convenient Dual check valves allow priming in multiple orientations.
- Widely Use Multi-layer low-permeation primer bulb,Work great for Boats, RVs, Tractors, and Caravans.
- Package Included 1 x Fuel line Assembly
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 0.04 x 72.00 x 0.44 Inches
See On Amazon #8
DasMarine 3500 GPH 12v Boat Marine Plumbing Electric Bilge Pump 1 1/2"(40MM) Outlet 14 AMP 16 AMP Fuse
Asin: B07KP82KDP | Ean: 0733810489009 | UPC: 733810489009
【Efficient】: Quick Release Strainer For Easy Maintenance; Low Current Draw And Offers High Capacity Output.
【Package Included】: 1 X 12V 3500 Gph Bilge Pump； 12V; 14Amp; 40Mm Id Hose.
【Safe】:Ignition Protection To Protect The Pump Against High Current; Water/Moisture Tight Seals.
【Great Quality】:Rustproof And Corrosion Resistant; Stainless Steel Shaft; High-Impact Durable Plastic Housing.
Features
- Heavy Duty : fully submersible electric pump; Tough, efficient, long life motor
- Great Quality :Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing
- Efficient : Quick release strainer for easy maintenance; low current draw and offers high capacity output
- Safe :Ignition protection to protect the pump against high current; Water/moisture tight seals
- Package included : 1 x 12v 3500 GPH Bilge Pump 12V; 14AMP; 40MM ID HOSE
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
See On Amazon #9
Stainless Steel Bar- 416SS- Surface Ground- Stainless Steel for Knifemaking, Metalworking, Forging- 12" Piece (1, 093"x4")
Asin: B0CZY15C9T
This 416Ss Has Been Surface Ground To The Specified Thickness With A Tolerance Of Plus .010". As An Example: If The Material Is Specified As .125" Thick, It Might Be Up To .135" Thick. Surface Ground Is Not Precision Ground. Surface Grinding Removes All Foundry Bark And Leaves A Bright, Clean Steel Finish As Opposed To The Typical 416Ss That Has A Hard, Dark Gray "Bark". This Process Adds Cost To The Final Product But It Really Helps To Get A Nice Flat, Clean Steel To Work With..
This Steel Is Hot Rolled And Annealed, Then Descaled Hr Means Hot Rolled And This Steel Was Rolled To Thickness Usually During The Smelting Process But Maybe Later. The Steel Generally Will Be Half Or Nearly Fully Hard Depending On The Type. It May Often Have Mill Scale Residue. This Steel Can Be Easily Forged. It Can Also Be Ground Via Stock Removal. Drilling A Hole In The Tang Maybe Hard To Do With Out A Carbide Bit. Hra Is The Same But The Steel Was Later Annealed To Relieve Stress And Make It As Soft As Possible For Easier Machining..
Used For Bolsters, Guards, Frame Locks. 416 Can Be Heat Treated To Be Hardened To Approximately 45Rc. This Stock Is Annealed. Tip: 400 Series Stainless Is Slightly Magnetic. 300 Series Is Not Magnetic. If You Get Them Mixed Up, Use A Magnet To Sort Them Out..
Features
- When you order 1 quantity, you receive a 12" piece
- Used for bolsters, guards, frame locks. 416 can be heat treated to be hardened to approximately 45RC. This stock is annealed. Tip: 400 series stainless is slightly magnetic. 300 series is not magnetic. If you get them mixed up, use a magnet to sort them out.
- This 416ss has been surface ground to the specified thickness with a tolerance of plus .010. As an example: if the material is specified as .125 thick, it might be up to .135 thick. Surface ground is not precision ground. Surface grinding removes all foundry bark and leaves a bright, clean steel finish as opposed to the typical 416ss that has a hard, dark gray bark. This process adds cost to the final product but it really helps to get a nice flat, clean steel to work with.
- This steel is hot rolled and annealed, then descaled HR means hot rolled and this steel was rolled to thickness usually during the smelting process but maybe later. The steel generally will be half or nearly fully hard depending on the type. It may often have mill scale residue. This steel can be easily forged. It can also be ground via stock removal. Drilling a hole in the tang maybe hard to do with out a carbide bit. HRA is the same but the steel was later annealed to relieve stress and make it as soft as possible for easier machining.
- See more on Amazon...
Brand: USA Knifemaker Supply | Manufacturer: Niagara Specialty Metals
Dimensions: 0.09 x 12.00 x 4.00 inches
See On Amazon #10
DasMarine 2000 GPH 12v Boat Marine Plumbing Electric Bilge Pump 1 1/8"(29MM) Outlet 8.5AMP
Asin: B07DCQSZHK | Ean: 0615200886592 | UPC: 615200886592
【Efficient】: Quick Release Strainer For Easy Maintenance; Low Current Draw And Offers High Capacity Output.
【Package Included】: 1 X 12V 2000 Gph Bilge Pump； 12V; 8.5Amp; 29Mm Id Hose.
【Safe】:Ignition Protection To Protect The Pump Against High Current; Water/Moisture Tight Seals.
【Great Quality】:Rustproof And Corrosion Resistant; Stainless Steel Shaft; High-Impact Durable Plastic Housing.
Features
- Heavy Duty : fully submersible electric pump; Tough, efficient, long life motor
- Great Quality :Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing
- Efficient : Quick release strainer for easy maintenance; low current draw and offers high capacity output
- Safe :Ignition protection to protect the pump against high current; Water/moisture tight seals
- Package included : 1 x 12v 2000 GPH Bilge Pump 12V; 8.5AMP; 29MM ID HOSE
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 6.00 x 3.00 x 3.00 Inches
See On Amazon #11
DasMarine 1100GPH 12V 3.2 AMP 5.0 AMP Fuse 29mm ID Hose Electric Marine Submersible Bilge Sump Water Pump for Boat Yacht
Asin: B08CKVRGRK | Ean: 0617256008430 | UPC: 617256008430
3.Heavy Duty Motors With Stainless Steel Shafts And Tough. Thermoplastic Bodies Submersible Bilge Pumps Are Tough Enough For Any Bilge.
5.Silent And Vibrationless Operation. Stainless Steel Shaft, Completely Submersible, Rust And Corrosion Protection, Need A Separate Float Switch.
4.Snap Lock Strainer Base For Easy Installation And Removal; Silent And Vibrationless Operation.
2. Fully Submersible Electric Pump.Small Size, High Efficiency, Low Current (Low Cost Switching Power Supply Supporting).
Features
- 1.Flow Rate (GPH): 1100GPH; Volt: 12V; hose barb discharge outlet:1-1/8 inch (29millimeter)
- 2. Fully submersible electric pump.Small size, high efficiency, low current (low cost switching power supply supporting)
- 3.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge
- 4.Snap lock strainer base for easy installation and removal; Silent and vibrationless operation
- 5.Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection, need a separate float switch
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
See On Amazon #12
DasMarine 3 Step Ladder 316 Stainless Steel Telescoping Ladder, 900 Pound Capacity for Marine Yacht/Swimming Pool with Retaining Strap (Standard Width, 3 Step)
Asin: B07Q28TQT5 | Model: Standard Width | PartNumber: Standard Width | Ean: 0733810519461, 0733810536789 | UPC: 733810536789, 733810519461
【Application】:This Telescopic Boat Ladder Is Made To Be Bolted To A Horizontal Platform Such A The Boat Floor Or Side Railings Depending On The Installation. The Design Of This Platform Ladder Makes It Possible To Be Used As On A Pontoon Boat..
【Package Included】: 1 X 3 Step Ladder; 1 X Secure Strap; Mounting Screws Are Included(The Diameter Of The Hole For Screw Is About 6Mm/0.23Inch).
【Dimensions】: Thickness Of Tube: 1.2"; Length Folded 14.625", Length Extended 33.8", Width (Outside Of Bracket) 11.875", Step Thread: 7.25" X 1.5"; Proof Load 900 Lbs..
【Compact & Convenient】: The Telescoping Steps On This Boat Ladder Fold Quickly And Effortlessly Into The Water For Safe Boarding. For Storage, The Low Profile Stainless Steel Steps Fold Compactly And Also Gives This Boarding Ladder A Very Sleek Look..
Features
- OEM Quality : Constructed of marine grade 316 stainless steel and have a proofload to support even the biggest swimmer. Each step has a slip-proof plastic tread to assure maximum safety.
- Compact & Convenient : The telescoping steps on this boat ladder fold quickly and effortlessly into the water for safe boarding. For storage, the low profile stainless steel steps fold compactly and also gives this boarding ladder a very sleek look.
- Application :This telescopic boat ladder is made to be bolted to a horizontal platform such a the boat floor or side railings depending on the installation. The design of this platform ladder makes it possible to be used as on a pontoon boat.
- Dimensions : Thickness of Tube: 1.2; Length Folded 14.625, Length Extended 33.8, Width (Outside of Bracket) 11.875, Step Thread: 7.25 X 1.5; Proof Load 900 lbs.
- Package Included : 1 x 3 Step Ladder; 1 x secure strap; Mounting Screws are included(The diameter of the hole for screw is about 6mm/0.23inch)
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
Dimensions: 2.00 x 16.00 x 12.00 Inches
See On Amazon #13
DasMarine Beer Drip Tray Surface Mount No Drain, 12" x 5", Stainless Steel
Asin: B07X9Y5WJQ | Ean: 0733810553052 | UPC: 733810553052
【Easy To Clean & Install:】Removable, Easy To Clean Drain Grate, Flat Louvers, Dump It Out In The Sink And Rinse With Water Or Put It In The Dishwasher.
【Package Included:】1 X 12"L X 5"W Mount Drip Tray, No Drain.
【Dimensions:】12"L X 5"W X 3/4"T..
【Function:】Drip Tray For Your Single Tap Draft Beer System, Collects Faucet Drips And Pint Glass Run-Off..
Features
- Material: Heavy duty, 304 grade sanitary stainless steel
- Function: Drip tray for your single tap draft beer system, collects faucet drips and pint glass run-off.
- Easy To Clean & Install: Removable, easy to clean drain grate, flat louvers, dump it out in the sink and rinse with water or put it in the dishwasher
- Dimensions: 12L x 5W x 3/4T.
- Package Included: 1 x 12L x 5W Mount Drip Tray, No Drain
- See more on Amazon...
Brand: DasMarine
Dimensions: 0.79 x 0.79 x 0.79 Inches
See On Amazon #14
DasMarine 12 Pcs M5 Stainless Steel Ceiling Hook Ring Hooks,Staple Hook Loop,Oblong Sail Shade Pad Eye Plate with 24 Pcs Screws,1.77" X0.59" Pad Eye Plate
Asin: B083QDNVCZ | Model: DasMarine | PartNumber: DasMarine | Ean: 0609832305187 | UPC: 609832305187
√ Easy To Install: The Staple Hook Loop Come With Screws, Only Drill Screw Holes And You Can Easily Mount This To Anywhere You Want Indoors Or Outdoors..
√ Package Included: 12X M5 Oblong Sail Shade Pad Eye Plate ,24X Screws..
√ Specification: Wire Diameter: M5(5Mm), Pad: 1.77"X0.59"X0.12"(L X W X T), Load-Bearing: 661 Lb..
√ Wide Application: The Staple Ring Hook Loop Is Perfect For Buckles And Links, They Are Used For Wooden/Concrete Ceiling,Brick Walls,Trees,Wall Mount Hanging Hardware Fitting,Hammock Chairs, Boat Decks,Porch Swings,Swinging Chairs,Hanging Plants,Lights,Punching Bags Etc..
Features
- Material:The Oblong Sail Shade Pad Eye Plate is made of 304 stainless steel,it is very durable and sturdy.
- Wide Application: The Staple Ring Hook Loop is perfect for buckles and links, they are used for wooden/concrete ceiling,brick walls,trees,wall mount hanging hardware fitting,hammock chairs, boat decks,porch swings,swinging chairs,hanging plants,lights,punching bags etc.
- Easy to Install: The Staple Hook Loop come with screws, only drill screw holes and you can easily mount this to anywhere you want indoors or outdoors.
- Specification: Wire Diameter: M5(5mm), Pad: 1.77X0.59X0.12(L X W X T), Load-Bearing: 661 lb.
- Package Included: 12X M5 Oblong Sail Shade Pad Eye Plate ,24X Screws.
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
See On Amazon #15
DasMarine 12 Pack M8 Stainless Steel Pad Eye Plate, Staple Ring Hook Loop,U-Shaped Sail Shade Hardware,Wall Ceiling Hammock Hooks Hanger for Swing Suspension with 48 Pcs Screws,1.97" X 1.57"
Asin: B089B39KQX | Model: DA-12 | PartNumber: DA-12 | Ean: 0609832305842 | UPC: 609832305842
Special Design: Our Heavy Duty Hanging Hammock Hook Kit Has 4 Holes, Which Adds Stability And Sturdiness..Each Swing Hooks Can Bear 300 Lb(Depends On What Kinds Of Screws You Used)..
Package Included: 12 X M8 Eye Plate ; 48 X Screw; 48X Anchor.
Various Application: Our Sail Shade Hardware Hook Is Perfect For Hammock Chairs, Porch Swings, Swinging Chairs, Punching Bags, Or Hanging Any Other Heavy Object From An Overhead Mount..
Easy To Mount: This Wall Ceiling Mounted Swing Hook Is Suitable For Mounting To Solid Walls, Ceilings, Floors, Decks, Trees Etc.. Only Minutes To Drill Screw Holes And You Can Easily Mount This To Anywhere Indoors Or Outdoors You Want..
Features
- Heavy Duty Pad Eye: Our pad eye plate is made of high quality 304 stainless steel with ring hook, and loop u-shaped design is secure and sturdy.
- Easy to Mount: This wall ceiling mounted swing hook is suitable for Mounting to Solid Walls, Ceilings, Floors, Decks, Trees etc.. Only minutes to drill screw holes and you can easily mount this to anywhere indoors or outdoors you want.
- Special Design: Our heavy duty hanging hammock hook Kit has 4 holes, which adds stability and sturdiness..Each swing hooks can bear 300 lb(Depends on what kinds of screws you used).
- Various Application: Our sail shade hardware hook is perfect for hammock chairs, porch swings, swinging chairs, punching bags, or hanging any other heavy object from an overhead mount.
- Package Included: 12 x M8 Eye Plate ; 48 x Screw; 48x Anchor
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
See On Amazon
Looking For Something Else?
Search