uxcell 4pcs 3D Printer Heated Bed Yellow Spring Kit Light Load Compression Leveling Springs 25mm/0.98 Inch
Asin: B07XCVSJHS | Model: a19073000ux0081 | PartNumber: a19073000ux0081
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Feature: The Die Springs Are Stiffer Than Ordinary Spring, Don't Need To Level Heat Bed Frequently After Installing These Springs, Easy To Replace The Old Spring, Good For Heat Bed Bottom Connect Leveling..
Free Length: 25Mm /0.98 Inch; Outer Diameter: 8Mm/0.31 Inch; Inner Diameter: 5Mm/0.2 Inch..
Package Content: 4 X Heated Bed Spring; Yellow Spring Loading Grade: Light Load.
Advantage: Increase The Stability Of The Heat Bed And Allow It To Be Leveled More Easily, Adjustable Height Range Will Be Increased Significantly, Help You To Print With A 3D Printer More Stably..
Features
- Compatibility: The heating bed springs are compatible with most 3D printer heat beds.
- Advantage: Increase the stability of the heat bed and allow it to be leveled more easily, adjustable height range will be increased significantly, help you to print with a 3D printer more stably.
- Feature: The die springs are stiffer than ordinary spring, don't need to level heat bed frequently after installing these springs, easy to replace the old spring, good for heat bed bottom connect leveling.
- Package Content: 4 x Heated Bed Spring; Yellow Spring Loading Grade: Light Load
- Free Length: 25mm /0.98 inch; Outer Diameter: 8mm/0.31 inch; Inner Diameter: 5mm/0.2 inch.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 4pcs 3D Printer Heated
#1
MakerHawk 5pcs Aluminum Heater Block for MK7 / MK8 3D Printer and 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and 5pcs 12V 40W 620 Ceramic Cartridge Heater for 3D Printer
Asin: B07GWQLG6Y | Model: MPALMTQ13448GA02ATFY96 | PartNumber: MPALMTQ13448GA02ATFY96 | Ean: 0673400135353 | UPC: 673400135353
Ntc 3950 100K Thermistor: For 3D Printers: Use Temp_Sensor 11 In Marlin Firmware; Resistance Value At 25°C=100K;.
We Have A Strong After-Sales Team, If You Have Any Questions, Please Feel Free To Email Us. Click On "Makerhawk-Us",Then "Ask A Question".We Will Reply To You As Soon As Possible. Thank You For Your Cooperation!.
Cartridge Heater: The Solids, Liquids, And Gases Need To Be Heated By Cartridge Heater, Transmit Heat Quickly By Conduction If The Producer Of The Heat (The Cartridge) Is In Direct Contact With The Heat Sink (Any Solid, Liquid, Or Gas); Widely Used For Manufacturing Plastic And Rubber Parts In The Car Industry Or In The Food Processing Industry, Etc.
12V 40W 620 Ceramic Cartridge Heater: Resistance: Material: 304 Stainless Steel; Lead Wire: 0.3 Square; 2080 High Temperature Resistant High Quality Oxide Powder..
Features
- 3d printer heater block: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
- 12V 40W 620 Ceramic Cartridge Heater: Resistance: Material: 304 stainless steel; Lead wire: 0.3 square; 2080 high temperature resistant high quality oxide powder.
- NTC 3950 100K Thermistor: For 3D printers: use TEMP_SENSOR 11 in Marlin firmware; Resistance value at 25 C=100K;
- Cartridge Heater: The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas); Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
- We have a strong after-sales team, if you have any questions, please feel free to email us. Click on MakerHawk-US,then Ask a question.We will reply to you as soon as possible. Thank you for your cooperation!
- See more on Amazon...
Brand: MakerHawk | Manufacturer: MakerHawk
Dimensions: 0.39 x 0.79 x 0.79 Inches | Weight: 0.18 Pounds
See On Amazon #2
Filalab New Upgrade Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control forLCD DLP ELEGOO,ANYCUBIC,CREALITY LCD DLP 3D Printer
Asin: B0CMQ57167 | Model: BL-HEATER-2 | PartNumber: BL-HEATER-2 | Ean: 0738631206682 | UPC: 738631206682
【Improve The Printing Quality】With This Heater You Can Speed Up Printing Time, Decreases Warping, Increases Detail Level On Thick Resins..
【Widely Use】The Size Is T 10.8X5.7X3.2Cm/4.25X5.24X1.25 In, Prefect For Most Brand Resin Printer,Such As Creality,Anycubic,Elegoo,Frozen.
【High Quality Design】The Heater Built In High-Precision Temperature Sensor, Accurate To 0.1 ℃. Fireproof Case, High-Quality Power Cord, All Professionally Designed For Your Safe Printing..
【Reduce Odor】This Heater Is With Fan And Activated Carbon Filters, Which Can Filter Odor..
Features
- controlled and Keep temperature This heater is design for control your resin printer ,make you can print at any environment where room temperature is less than normal 25 C / 77 F.When the temperature is lower than the set temperature, start heating; when the temperature reaches the set temperature, start fan circulation
- Reduce Odor This heater is with fan and activated carbon filters, which can filter odor.
- Improve the printing quality With this heater you can Speed up printing time, decreases warping, Increases detail level on thick resins.
- High quality design the heater built in high-precision temperature sensor, accurate to 0.1 . Fireproof case, high-quality power cord, all professionally designed for your safe printing.
- Widely use the size is t 10.8x5.7x3.2cm/4.25x5.24x1.25 in, Prefect for most brand resin printer,such as Creality,Anycubic,ELEGOO,Frozen
- See more on Amazon...
Brand: Filalab | Manufacturer: Filalab
See On Amazon #3
uxcell Heatsink with Hole for Stepper Motor,3D Printer 40x40x11mm Black 4pcs
Asin: B08HJGPXN6 | Model: a19120300ux0925 | PartNumber: a19120300ux0925
[Description] This Heatsink Come Without Any Thermal Tape Or Adhesive Tape, We Recommend Using Some Glue (Here Is Not Included) To Stick..
[Note] Some Scratches May Be Caused In The Production Process, But This Does Not Affect The Cooling Effect..
[Feature] With Horizontal And Vertical Cooling Slots.It Only Take Seconds To Install, Easy To Install..
[Application] Great For Cooling Chips, Stepper Motor Driver Module And Other Small Electronics That Didn't Come With Any Cooling..
Features
- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color Black.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [FEATURE] With horizontal and vertical cooling slots.It only take seconds to install, easy to install.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Heatsink with Hole for Stepper Motor,3D Printer 40x40x11mm Golden 4pcs
Asin: B08HJL5FB7 | Model: a19120300ux0923 | PartNumber: a19120300ux0923
[Description] This Heatsink Come Without Any Thermal Tape Or Adhesive Tape, We Recommend Using Some Glue (Here Is Not Included) To Stick..
[Note] Some Scratches May Be Caused In The Production Process, But This Does Not Affect The Cooling Effect..
[Feature] With Smooth Surface.It Only Take Seconds To Install, Easy To Install..
[Application] Great For Cooling Chips, Stepper Motor Driver Module And Other Small Electronics That Didn't Come With Any Cooling..
Features
- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color Gold Tone.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [FEATURE] With smooth surface.It only take seconds to install, easy to install.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 5x25x25mm Black Aluminum Heatsink Thermal Adhesive Pad Cooler for Cooling 3D Printers 4Pcs
Asin: B08HLY7BKR | Model: a19120300ux0953 | PartNumber: a19120300ux0953
Effectively For Cooling 3D Printer, The Motors Couldn't Sink Heat Into The Frame, And Heatsink Will Reduce The Temperature Of Stepper Motors..
Package Content: 4 X Heatsink..
Easy To Install, It Only Take Seconds To Install..
This Heatsink Come With Thermal Conductivity Adhesive ,Which Can Provide Good Cooling Results..
Features
- Overall Size: 5 x 25 x 25 mm / 0.2 x 0.98 x 0.98 inch; Color Black.
- This heatsink come with thermal conductivity adhesive ,which can provide good cooling results.
- Effectively for cooling 3D printer, the motors couldn't sink heat into the frame, and heatsink will reduce the temperature of stepper motors.
- Easy to install, it only take seconds to install.
- Package Content: 4 x Heatsink.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Heatsink for 3D Printers, Fit for Filament 3mm 3pcs
Asin: B07X6NTF6T | Model: a19073000ux0156 | PartNumber: a19073000ux0156
Fit For 3Mm Heatsink..
Package Content: 3 X Heatsink..
Easy To Install, It Only Takes Seconds To Assembly..
Great For Use On V6 J-Head Extruder Hot End, Etc..
Features
- Top Hole Diameter: 3 mm; Bottom Thread Size: M6; Top Outer Diameter: 16 mm / 0.63 inch; Overall Size: 22.3 x 43 mm / 0.88 x 1.69 inch (D*H).
- Great for use on V6 J-Head Extruder Hot End, etc.
- Fit for 3mm heatsink.
- Easy to install, it only takes seconds to assembly.
- Package Content: 3 x Heatsink.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
Create idea 2PCS 3D Printer Heating Rod 24V 50W with Thermistor NTC 100K Compatible with Elegoo Neptune 4 Pro/Plus/Max 3D Printer Hotend Kit
Asin: B0CYNRR7TH | Ean: 6942343316810
3. Wide Compatibility: Designed Specifically Compatible With Elegoo Neptune 4 Series, Including Compatible With Neptune 4, Compatible With Neptune 4 Pro, Compatible With Neptune 4 Max, And Compatible With Neptune 4 Plus 3D Printers..
5. Easy Replacement: This Package Includes One 24V 50W Heater Cartridge Tube And One Thermistor, Offering A Convenient Replacement Solution For Your Printer's Heating System..
4. Durable And Reliable: Crafted With High-Quality Materials, The 24V 50W Heater Cartridge Element And Ntc 100K Thermistor Are Built To Last. The Sturdy Construction Of The Rod And The Thermistor's Ability To Withstand High Temperatures Make Them Reliable Components For Your 3D Printing Needs..
2. Accurate Temperature Sensing: Equipped With A Ntc 100K Thermistor, This Cartridge Sensor Can Accurately Detect Temperatures Up To 300? For Extended Periods. With Its Ph2.0 Connector And Cartridge Size Of Od 3X10mm, It Offers Precise Temperature Measurements To Optimize Your Printing Process..
Features
- 1. High-Quality Heating Performance: The 24V 50W Heater Cartridge Element provides exceptional heating ,compatible with Elegoo Neptune 4 Pro/Plus/Max 3D Printer. With its XH2.54 connector and closed stainless steel sleeve, this heating rod ensures even heating to ensure high-quality printing results.
- 2. Accurate Temperature Sensing: Equipped with a NTC 100K Thermistor, this cartridge sensor can accurately detect temperatures up to 300? for extended periods. With its PH2.0 connector and cartridge size of OD 3x10mm, it offers precise temperature measurements to optimize your printing process.
- 3. Wide Compatibility: Designed specifically compatible with Elegoo Neptune 4 series, including compatible with Neptune 4, compatible with Neptune 4 Pro, compatible with Neptune 4 Max, and compatible with Neptune 4 Plus 3D printers.
- 4. Durable and Reliable: Crafted with high-quality materials, the 24V 50W Heater Cartridge Element and NTC 100K Thermistor are built to last. The sturdy construction of the rod and the thermistor's ability to withstand high temperatures make them reliable components for your 3D printing needs.
- 5. Easy Replacement: This package includes one 24V 50W heater cartridge tube and one thermistor, offering a convenient replacement solution for your printer's heating system.
- See more on Amazon...
Brand: Create idea | Manufacturer: Create idea
See On Amazon #8
uxcell 10x25x25mm Black Aluminum Heatsink Thermal Adhesive Pad Cooler for Cooling 3D Printers 4Pcs
Asin: B08HM1RZMP | Model: a19120300ux0956 | PartNumber: a19120300ux0956
Effectively For Cooling 3D Printer, The Motors Couldn't Sink Heat Into The Frame, And Heatsink Will Reduce The Temperature Of Stepper Motors..
Package Content: 4 X Heatsink..
Easy To Install, It Only Take Seconds To Install..
This Heatsink Come With Thermal Conductivity Adhesive ,Which Can Provide Good Cooling Results..
Features
- Overall Size: 10 x 25 x 25 mm / 0.39 x 0.98 x 0.98 inch; Color Black.
- This heatsink come with thermal conductivity adhesive ,which can provide good cooling results.
- Effectively for cooling 3D printer, the motors couldn't sink heat into the frame, and heatsink will reduce the temperature of stepper motors.
- Easy to install, it only take seconds to install.
- Package Content: 4 x Heatsink.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 0.6mm 3D Printer Nozzle Head M7 Thread Replacement for MK10 1.75mm Extruder Print, Brass 4pcs
Asin: B07TXNLF5R | Model: a19043000ux0420 | PartNumber: a19043000ux0420
[Brass Material]: Not Easy To Get Rust Or Erosion, Provides Long Service Life..
[Application]: Suitable For Most Non-Abrasive Materials Such As Pla, Abs, Nylon, Tpe, Tpu, Pc Etc..
[Smooth Surface]: Smooth Contact Surface Can Be Well Connected With Other Head Of Hot End To Avoid Exudation, Get A Smooth And Clean Printing..
[Compatibility]: For 1.75Mm Filament Mk10 3D Printers..
Features
- [Size]: Thread: M7; Nozzle Diameter: 0.6mm; Input Diameter: 4mm; Total Dimension: 13x9mm / 0.5"x0.35" (L*D)
- [Compatibility]: for 1.75mm Filament MK10 3D printers.
- [Brass Material]: Not easy to get rust or erosion, provides long service life.
- [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
- [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search