Optic Delrin Shim to give Extra Elevation Range for Holosun 407K/507K Shield, Sig Sauer Romeo Zero, Leupold Delta Point Pro and JP Enterprises Micro Red dot Sight
Asin: B07Y3Y1T96
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Does Not Fit Trijicon Rmr/Sro, Doctor, Vortex Venom/Viper, Burris Fastfire, Ade Rd3-006/009/012/013.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. ..
Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree.
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
Fits: Shield Rms/Rmsc/Rmsw/Sms, Ade Rd3-018 Spike, Sig Sauer Romeo Zero, Leupold Delta Point Pro, Jp Enterprises Jpoint, Swampfox Sentinel Red Dot Sight. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
Features
- Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Does NOT fit Trijicon RMR/SRO, Doctor, Vortex Venom/Viper, Burris Fastfire, ADE RD3-006/009/012/013
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. .
- Scope base shims Tolerance +/-.005 Taper 1.0 degree
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon Similar To Optic Delrin Shim to give
#1
ADE Optics Delrin Shims to give Extra Elevation Range for Vortex Venom/Viper, Burris Fastfire, Hex Dragonfly, Sightmark Mini Shot M-Spec/Pro Spec, Leica Tempus, Noblex Sight Red dot Sight
Asin: B07Y3WT9ZC
Fits: Vortex Venom & Viper, Burris Fastfire Ii, Iii, Docter Red Dot Sight, Insight, Eotech Mrds, Sightmark Minishot, Meopta. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015. The Center Two Screw Holes Might Be 1 Or 2Mm Off For Some Red Dots, If So, Simply Trim Cut The Hole Bigger. Does Not Fit Trijicon Rmr, Shield, Sig Romeo, Holosun Red Dots.
Do Not Return Your "Defective" Red Dot That Can't Adjust The Illuminated Dot High Enough To Zero. This Optic Shim Solves The Problem By Raising The Red Dot Higher To Zero..
Features
- Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero.
- Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.09 pounds
See On Amazon #2
Ade Advanced Optics Optics Riser/Delrin Elevation Shim to give Extra Adjustment Range for Holosun 407K/507K, Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 Spike Handgun Reflex Red Dot Sight
Asin: B07Y3VV4P8
Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree.
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Fits: Shield Rms/Rmsc/Rmsw/Sms, Ade Rd3-018 Spike, Sig Sauer Romeo Zero, Leupold Delta Point Pro, Jp Enterprises Jpoint, Swampfox Sentinel Red Dot Sight. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
Features
- Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Scope base shims Tolerance +/-.005 Taper 1.0 degree
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #3
ADE Optics Delrin Shims to Increase Elevation for Holosun 407k/507k, Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 Spike, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint Red dot Sight
Asin: B07Y4F6YFT
Fits: Shield Rms/Rmsc/Rmsw/Sms, Ade Rd3-018 Spike, Sig Sauer Romeo Zero, Leupold Delta Point Pro, Jp Enterprises Jpoint, Swampfox Sentinel Red Dot Sight. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree.
Features
- Optic Shim is made to fit between the red dot and the mounting plate.
- Scope base shims Tolerance +/-.005 Taper 1.0 degree
- Fits: Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #4
Ade Advanced Optics Optics Shims Elevation Shim to give Extra Adjustment Range for Trijicon RMR, Holosun 407C/507C/508T, Swampfox Justice/Liberty/Kingslayer Red Dot Sight
Asin: B07Y437H5D
Also Fits Riton X3 Tactix Prd, Ade Rd3-011, Swampox Kingslayer/Liberty/Justice. The Shim Might Need To Be Trimmed To The Shape To Match Some Of Red Dot Brand Mentioned Above..
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Fits: Trijicon Rmr/Sro, Ade Advanced Optics, Rd3-019, Rd3-020, Rd3-023, Holosun Hs407c/Hs507c/Hs507t And.
Features
- Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Trijicon RMR/SRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407C/HS507C/HS507T and
- Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox Kingslayer/Liberty/Justice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #5
Ade Advanced Optics Optics Riser/Shim Delrin Shims 1.0 Degree for Trijicon RMR, Holosun 407C/507C/508T, NcStar VISM FlipDot Pro, NcStar VISM FlipDot Pro, Riton X3 Tactix PRD Handgun Reflex Red Dot
Asin: B07Y43FXK1
Also Fits Riton X3 Tactix Prd, Ade Rd3-011, Swampox Kingslayer/Liberty/Justice. The Shim Might Need To Be Trimmed To The Shape To Match Some Of Red Dot Brand Mentioned Above..
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Fits: Trijicon Rmr/Sro, Ade Advanced Optics, Rd3-019, Rd3-020, Rd3-023, Holosun Hs407c/Hs507c/Hs507t And.
Features
- Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Trijicon RMR/SRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407C/HS507C/HS507T and
- Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox Kingslayer/Liberty/Justice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #6
Optics Shim/Riser for Doctor/Noblex, Burris Fastfire 1-4, Meopta Meosight IV, Vortex Venom, ADE RD3-006B, RD3-009,RD3-012, RD3-013, RD3-015, Vortex Venom,Vortex Viper,Eotech MRDS,Insight Red dot Sight
Asin: B07Y417KMD
Also Fits: Eotech Mrds, Sightmark, Meopta. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015. The Center Two Screw Holes Might Be 1 Or 2Mm Off For Some Red Dots, If So, Simply Trim Cut The Hole Bigger. Does Not Fit Trijicon Rmr, Shield, Sig Romeo, Holosun Red Dots.
Fits: Burris Fastfire Ii, Iii, Docter Red Dot Sight & Insight Mrds.
Features
- Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- Fits: Burris Fastfire II, III, Docter Red Dot Sight & Insight MRDS
- Also Fits: Eotech MRDS, Sightmark, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #7
ADE's Extra Elevation Range Shim for Doctor, Meopta, MAKdot 1x25, Vortex Venom, Vortex Viper/Venom, Primary Arms SLX RS-10, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015, RD3-028 Red dot Sight
Asin: B07Y3THRGL
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015. The Center Two Screw Holes Might Be 1 Or 2Mm Off For Some Red Dots, If So, Simply Trim Cut The Hole Bigger. Does Not Fit Trijicon Rmr, Shield, Sig Romeo, Holosun Red Dots.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015.
Fits: Burris Fastfire Ii, Iii, Docter Red Dot Sight & Insight Mrds.
Features
- Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- Fits: Burris Fastfire II, III, Docter Red Dot Sight & Insight MRDS
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #8
ADE Optics 1 Degree Shims Elevation Shim to give Extra Adjustment Range for Trijicon RMR, Holosun 407C/507C/508T, NcStar VISM FlipDot Pro, Riton X3 Tactix PRD, Vector Optics Frenzy 1x22x26 Red Dot
Asin: B07Y3YJNQ5
Also Fits Riton X3 Tactix Prd, Ade Rd3-011, Swampox Kingslayer/Liberty/Justice. The Shim Might Need To Be Trimmed To The Shape To Match Some Of Red Dot Brand Mentioned Above..
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Fits: Trijicon Rmr/Sro, Ade Advanced Optics, Rd3-019, Rd3-020, Rd3-023, Holosun Hs407c/Hs507c/Hs507t And.
Features
- Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Trijicon RMR/SRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407C/HS507C/HS507T and
- Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox Kingslayer/Liberty/Justice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon
Looking For Something Else?
Search