SparkFun RedBoard Artemis Nano Machine Learning Development Board Includes BLE 1 megabyte of Flash USB-C Qwiic I2C MEMS Microphone Compatible with Arduino IDE TenserFlow Models Small Footprint
Asin: B07YCWV37Z | Model: DEV-15443 | PartNumber: DEV-15443 | Ean: 0845156009824 | UPC: 845156009824
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fully Compatible With The Sparkfun's Compatible With Arduino Core And Can Be Programmed Easily Under The Arduino Ide Platform.
The Artemis Module Runs At 48Mhz With A 96Mhz Turbo Mode Available And Compatible With Bluetooth To Boot. Fcc/Ic/Ce Certified 8/16/2019 (Id Number 2Asw8-Art3mis).
With 1Mb Flash And 384K Ram You'll Have Plenty Of Room For Your Sketches..
Dual Row Of Ground Connections Make It Easy To Add Lots Of Buttons, Leds, And Anything That Requires Its Own Gnd Connection.
Features
- A light weight, 0.8mm thick PCB, with on board LiPo-battery charging and a Qwiic connector
- Dual row of ground connections make it easy to add lots of buttons, LEDs, and anything that requires its own GND connection
- Fully compatible with the SparkFun's compatible with Arduino core and can be programmed easily under the Arduino IDE platform
- With 1MB flash and 384k RAM you'll have plenty of room for your sketches.
- The Artemis module runs at 48MHz with a 96MHz turbo mode available and compatible with Bluetooth to boot. FCC/IC/CE Certified 8/16/2019 (ID Number 2ASW8-ART3MIS)
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.28 x 0.91 x 1.97 inches
See On Amazon Similar To SparkFun RedBoard Artemis Nano Machine
#1
SparkFun RedBoard Artemis Machine Learning Development Board Includes BLE One megabyte of Flash USB-C connector Qwiic I2C MEMS microphone Compatible with Arduino IDE Run TenserFlow models R3 footprint
Asin: B07YCVB6LL | Model: DEV-15444 | PartNumber: DEV-15444 | Ean: 0720310639966 | UPC: 720310639966
Includes 24 Gpio Pins - All Interrupt Capable. 21 Pwm Channels. Built In Technology Compatible With Bluetooth Low Energy 4.0 Radio.
Exposed Jtag Connector For More Advanced Users To Use The Power And Speed Of Professional Tools.
Features 10 Adc Channels With 14-Bit Precision, 2 Uarts, 6 I2c Buses, 4 Spi Buses, Pdm Interface.
1M Flash / 384K Ram Gives You Plenty Of Room For Your Sketches. 48Mhz / 96Mhz Turbo Available.
Features
- The Artemis module has the FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world s first open-source, US manufactured, BLE module
- 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available
- Includes 24 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio
- Features 10 ADC channels with 14-bit precision, 2 UARTs, 6 I2C buses, 4 SPI buses, PDM Interface
- Exposed JTAG connector for more advanced users to use the power and speed of professional tools
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.55 x 2.40 x 2.87 inches
See On Amazon #2
SparkFun RedBoard - Compatible with Arduino Breadboard-able Development board w/ R3 footprint Microcontroller serves as physical computing learning platform Connect to computer with USB Mini-B
Asin: B00BFGZZJO | Model: DEV-13975 | PartNumber: DEV-13975 | Ean: 0787551571813, 0700112246579 | UPC: 700112246579, 787551571813
All Smd Construction.
You'll Also Need A Mini-B-To-A Usb Cable It Powers The Redboard And Allows You To Upload Programs To It.
Input Voltage - 7-15V 0-5V Outputs With 3.3V Compatible Inputs.
Usb Programming Facilitated By The Ubiquitous Ftdi Ft232rl.
Features
- ATmega328 microcontroller with Optiboot (UNO) Bootloader. Compatible with Arduino IDE. R3 shield compatible.
- USB Programming Facilitated by the Ubiquitous FTDI FT232RL
- All SMD Construction
- Input voltage - 7-15V 0-5V outputs with 3.3V compatible inputs
- You'll also need a mini-B-to-A USB cable It powers the RedBoard and allows you to upload programs to it
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.50 x 3.00 x 1.00 inches | Weight: 0.13 pounds
See On Amazon #3
SparkFun RedBoard Plus - ATmega328P microcontroller with Optiboot (UNO) Bootloader - Qwiic Connect System - USB-C Connector - Additional Features to Our RedBoard Qwiic - Input Voltage 5V-15V
Asin: B0991GGY8L | Model: DEV-18158 | PartNumber: DEV-18158 | Ean: 0845156011612 | UPC: 845156011612
22X Digital I/O Pins (6X Pwm Outputs, 8X Analog Inputs, 1X Uart, 1X I2c, 1X Spi), 1X Qwiic Connector, A4/A5 Jumpers; All Smd Construction; R3 Shield Compatible, Improved Reset Button.
You Can Power The Sparkfun Redboard Plus Over Usb Or Through The Barrel Jack. The On-Board Power Regulator Can Handle Anything From 7Vdc To 15Vdc.
The Sparkfun Redboard Plus Can Be Programmed Over A Usb-C Cable Using The Arduino Ide: Just Plug In The Board, Select "Arduino Uno" From The Board Menu And You're Ready To Upload Code!.
Built-In Resettable Ptc Fuse 5V/2A; Ch340g Serial-To-Usb Converter, 3.3V To 5V Logic Level Switch; 2X3 Isp Header; 32Kb Flash Memory; 16Mhz Clock Speed.
Features
- ATmega328P microcontroller with Optiboot (UNO) Bootloader; Input voltage: 7V to 15V via barrel jack, 5V via USB-C; Voltage Regulators: LM1117 adjusted to 5V, AP2112 for 3.3V
- Built-in Resettable PTC Fuse 5V/2A; CH340G Serial-to-USB Converter, 3.3V to 5V Logic Level Switch; 2x3 ISP Header; 32kB Flash Memory; 16MHz Clock Speed
- 22x Digital I/O Pins (6x PWM Outputs, 8x Analog Inputs, 1x UART, 1x I2C, 1x SPI), 1x Qwiic Connector, A4/A5 Jumpers; All SMD Construction; R3 Shield Compatible, Improved Reset Button
- The SparkFun RedBoard Plus can be programmed over a USB-C cable using the Arduino IDE: Just plug in the board, select Arduino UNO from the board menu and you're ready to upload code!
- You can power the SparkFun RedBoard Plus over USB or through the barrel jack. The on-board power regulator can handle anything from 7VDC to 15VDC
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.59 x 2.56 x 3.15 inches | Weight: 0.05 Pounds
See On Amazon #4
SparkFun MicroMod Artemis Processor - Modular Interface Ecosystem That Connects Artemis microcontroller/Processor Board to Various/Carrier Board peripherals
Asin: B08LMLRY78 | Ean: 0845156010943 | UPC: 845156010943
Additional Artemis Features: 2 Channel Differential Adc, 2 Uarts, 6 I2c Buses, 6 Spi Buses, 2/4/8-Bit Spi Bus, Pdm Interface, I2s Interface, Secure 'Smart Card' Interface, Fcc/Ic/Ce Certified (Id Number 2Asw8-Art3mis).
Additional Peripherals Are Available But Are Shared On Dedicated Micromod Pins. Processor Board Only, Additional Carrier Board(S) Will Be Needed To Use..
Specific Peripherals Made Available On Micromod Artemis: 1X Usb Dedicated For Programming And Debug, 1X Uart With Flow Control, 2X I2c, 1X Spi, 1X Quad-Spi, 8X Fast Gpio, 2X Digital Pins, 2X Analog Pins, 2X Pwm, 1X Differential Adc Pair, Status Led, Vin Level Adc.
Additional Artemis Features: 10 Adc Channels With 14-Bit Precision With Up To 2.67, Million Samples Per Second Effective Continuous, Multi-Slot Sampling Rate.
Features
- Artemis General Features: 1M Flash / 384k RAM, 48MHz / 96MHz turbo available, 6uA/MHz (operates less than 5mW at full operation), 48 GPIO - all interrupt capable, 31 PWM channels, Built in BLE radio and antenna
- Additional Artemis Features: 10 ADC channels with 14-bit precision with up to 2.67, million samples per second effective continuous, multi-slot sampling rate
- Additional Artemis Features: 2 channel differential ADC, 2 UARTs, 6 I2C buses, 6 SPI buses, 2/4/8-bit SPI bus, PDM interface, I2S Interface, Secure 'Smart Card' interface, FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS)
- Specific Peripherals made available on MicroMod Artemis: 1x USB dedicated for programming and debug, 1x UART with flow control, 2x I2C, 1x SPI, 1x Quad-SPI, 8x Fast GPIO, 2x Digital Pins, 2x Analog Pins, 2x PWM, 1x Differential ADC pair, Status LED, VIN Level ADC
- Additional peripherals are available but are shared on dedicated MicroMod pins. Processor board only, additional carrier board(s) will be needed to use.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.24 x 0.98 x 0.98 inches | Weight: 0.01 Pounds
See On Amazon #5
SparkFun Thing Plus-Artemis Machine Learning Development Board Includes BLE 1MB of Flash USB-C Qwiic I2C MEMS LiPo Charger Compatible with Arduino IDE Platform Run TenserFlow Models Feather Footprint
Asin: B07YCVJ2XG | Model: DEV-15574 | PartNumber: DEV-15574
Includes 21 Gpio Pins - All Interrupt Capable. 21 Pwm Channels. Built In Technology Compatible With Bluetooth Low Energy 4.0 Radio.
Exposed Jtag Pin Holes For More Advanced Users To Use The Power And Speed Of Professional Tools.
Features 8 Adc Channels With 14-Bit Precision, 2 I2c Buses, 1 Spi Bus, Pdm Digital Microphone.
1M Flash / 384K Ram Gives You Plenty Of Room For Your Sketches. 48Mhz / 96Mhz Turbo Available.
Features
- FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world s first open-source, US manufactured, BLE module
- 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available
- Includes 21 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio
- Features 8 ADC channels with 14-bit precision, 2 I2C buses, 1 SPI bus, PDM Digital Microphone
- Exposed JTAG pin holes for more advanced users to use the power and speed of professional tools
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.31 x 0.94 x 2.40 inches
See On Amazon #6
SparkFun RedBoard Artemis ATP Machine Learning Development Board Includes BLE 1 megabyte Flash USB-C Qwiic I2C MEMS Microphone Compatible with Arduino IDE platform Run TenserFlow Models Mega Footprint
Asin: B07YCVWBDH | Model: DEV-15442 | PartNumber: DEV-15442 | Ean: 0845156009831 | UPC: 845156009831
Includes 48 Gpio Pins - All Interrupt Capable. 31 Pwm Channels. Built In Technology Compatible With Bluetooth Low Energy 4.0 Radio.
Exposed Jtag Connector For More Advanced Users To Use The Power And Speed Of Professional Tools.
Features 10 Adc Channels With 14-Bit Precision, 2 Uarts, 6 I2c Buses, 6 Spi Buses, Pdm Interface.
1M Flash / 384K Ram Gives You Plenty Of Room For Your Sketches. 48Mhz / 96Mhz Turbo Available.
Features
- FCC/IC/CE Certified 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world s first open-source, US manufactured, BLE module
- 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available
- Includes 48 GPIO pins - all interrupt capable. 31 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio
- Features 10 ADC channels with 14-bit precision, 2 UARTs, 6 I2C buses, 6 SPI buses, PDM Interface
- Exposed JTAG connector for more advanced users to use the power and speed of professional tools
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.55 x 2.36 x 4.17 Inches
See On Amazon #7
SparkFun RedBoard Artemis Arduino Compatible Microcontroller
Asin: B07ZP9TGJM | Ean: 0845156009817 | UPC: 845156009817
24 Gpio - All Interrupt Capable 21 Pwm Channels Built In Ble Radio 10 Adc Channels With 14-Bit Precision.
Arduino Uno R3 Footprint 1M Flash / 384K Ram 48Mhz / 96Mhz Turbo Available.
2 Uarts 6 I2c Buses 4 Spi Buses Pdm Interface I2s Interface Qwiic Connector.
With 1Mb Flash And 384K Ram You'll Have Plenty Of Room For Your Sketches. The Artemis Module Runs At 48Mhz With A 96Mhz Turbo Mode Available And With Bluetooth To Boot!.
Features
- Apollo 3 Cortex-M4 microcontroller Artemis Module
- With 1MB flash and 384k RAM you'll have plenty of room for your sketches. The Artemis module runs at 48MHz with a 96MHz turbo mode available and with Bluetooth to boot!
- 24 GPIO - all interrupt capable 21 PWM channels Built in BLE radio 10 ADC channels with 14-bit precision
- 2 UARTs 6 I2C buses 4 SPI buses PDM Interface I2S Interface Qwiic Connector
- Arduino Uno R3 Footprint 1M Flash / 384k RAM 48MHz / 96MHz turbo available
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.09 Pounds
See On Amazon #8
TinyML Cookbook - Second Edition: Combine machine learning with microcontrollers to solve real-world problems
Asin: 1837637369 | Ean: 9781837637362
First Available: 11/29/2023
Manufacturer: Packt Publishing
Dimensions: 1.37 x 9.25 x 7.52 inches | Weight: 2.51 pounds
See On Amazon
Looking For Something Else?
Search