Twidec/4Pcs 50W 6Ohm LED Load Resistors For Fix LED Hyper Flash Turn Signal Light Bulb Fast Blink Error Code Warning Cancellor RX24-50W6-4X
Asin: B07YJMY4WV | Model: RX24-50W6-4X | PartNumber: RX24-50W6-4X | Ean: 0704768700706, 0704768701130 | UPC: 704768700706, 704768701130
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Solution For "Bulb Out Signal" / "Obc Error Message" After Installing Smd Led Light Bulb. Solution For Fast Turn Signal Blinking Response After Installing Led Light Bulb..
If Led Load Resistor Will Not Solve Led Bulbs Flashing Issue, Which Mean The Led Bulb Is Defective.Easy Installation:Just Connect The Wires With The Splice Taps Provided..
Load Resistors Heat Up Like Light Bulbs And Get Really Hot When Working.Please Keep Resistors Inchs Away From Plastic Parts..
6 Ohm 50W Led Load Resistors Will Control The Current Flow In Electrical Circuits. Usually Each Led Bulb Installation Requires One Resistor Connected In Parellel..
Features
- It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.One-year warranty.
- 6 Ohm 50W LED Load Resistors will control the current flow in electrical circuits. Usually each LED bulb installation requires one resistor connected in parellel.
- Solution for bulb out signal / OBC error message after installing SMD LED light bulb. Solution for Fast Turn Signal Blinking response after installing LED light bulb.
- Load Resistors heat up like light bulbs and get really HOT when working.Please Keep resistors inchs away from plastic parts.
- If LED load resistor will not solve LED bulbs flashing issue, which mean the LED bulb is defective.Easy Installation:Just connect the wires with the splice taps provided.
- See more on Amazon...
Brand: Twidec | Manufacturer: Twidec
See On Amazon Similar To Twidec 4Pcs 50W 6Ohm LED
#1
Aaron 4Pcs 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Resistors get very hot during working)
Asin: B00L4V9ECY | Model: A4-50W-6ohm | PartNumber: A4-50W-6ohm | Ean: 0851621005147 | UPC: 851621005147
Warning: Load Resistors Heat Up Like Halogen Bulbs. They Get Really Hot When Working. Mount Them On Metal Surface By Screws(Not Included). Keep Resistors Inchs Away From Plastic Parts..
Usually Each Led Bulb Installation Requires One Resistor Connected In Parellel (See Picture Below For Instruction).
You May Connect The Wires With The Splice Taps Provided(Quick But Maybe Not Solid). Or You May Cut The Wires And Connect Them More Solidly..
Not Designed For Consistant Working Bulbs( Day Time Running Light, Fog Light, Headlight Led Bulbs). Resistors May Become Very Hot To Melt Plastic Parts Nearby..
Features
- Solution for fast turn signal blinking response after installing LED light bulbs.
- Not designed for consistant working bulbs( Day time running light, fog light, headlight LED bulbs). Resistors may become very hot to melt plastic parts nearby.
- Warning: Load Resistors heat up like halogen bulbs. They get really HOT when working. Mount them on metal surface by screws(not included). Keep resistors inchs away from plastic parts.
- You may connect the wires with the splice taps provided(quick but maybe not solid). Or you may cut the wires and connect them more solidly.
- Usually each LED bulb installation requires one resistor connected in parellel (see picture below for instruction)
- See more on Amazon...
Brand: Aaron
Weight: 0.26 Pounds
See On Amazon #2
iBrightstar 50W 6ohm Load Resistors - Fix Blink Error Code - 4PCS (Black), Black-4 PCS
Asin: B0C2QHBCC3 | Model: IBrightstar-resistor-50W/6ohm | PartNumber: IBrightstar-resistor-50W/6ohm
One Resistor Is Required For Each Bulb Or Each Light..
Easy Installation. Just Connect The Wires With The Splice Taps Provided And No Wire Cutting Is Necessary..
Notice! Load Resistors Heat Up Like Light Bulbs And Get Super Hot When Working. Make Sure You Mount Them Away From Any Wires Or Plastic..
Features
- Prevent Lights from hyper flashing, malfunction or trigger warning message on dashboard.
- NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic.
- One resistor is required for each bulb or each light.
- Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary.
- See more on Amazon...
Brand: iBrightstar | Manufacturer: iBrightstar
See On Amazon #3
Chanzon 60 Values 1/4W (0.25 watt) Metal Film Fixed Resistor Kit 300pcs 1R-4.7MR ohm 1% Tolerance 0.01 MF Through Hole Resistors Current Limiting Rohs Certificated 1/4 watt Resisters Assorted
Asin: B08PF3HNMD | Model: DZ-ZCDZ1-4WB1-DTC60-300 | PartNumber: DZ-ZCDZ1-4WB1-DTC60-300
Power: 1/4W (0.25W) Watt, Tol: ±1%, Diameter: 2.3Mm, Film Length : 6Mm, Axial Leads End: 25Mm, 300 Pcs Pieces Single Fixed Resistor With Line.
☛Application☚: For/On Precise Electronic Circuits, Arduino, Electronic And Electrical Communication Equipments, Musical Instrument Or Applications,Electronics.
☛Feature☚: High Stability, Low Noise, Low Temp Coefficient, Precision Characteris Tics Ohms, Long Working Life Resister.
Resistance Assortment Values: 1R 1.5R 2.2R 3.3R 4.7R 5.1R 10R 20R 22R 33R 47R 51R 100R 120R 150R 200R 220R 240R 270R 300R 330R 470R 510R 560R 680R 820R 1K 1K2 1K5 2K 2K2 2K4 2K7 3K 3K3 4K7 5K1 6K8 9K1 10K 15K 20K 22K 30K 33K 47K 51K 68K 100K 150K 200K 220K 300K 330R 390K 470K 680K 1M 2M2 4M7 R Ohm Kohm Megaohm.
Features
- Why Choose Us : 1. 0.5mm Fat Leg, Accurate for Breadboard 2. Clear Printed Resistance 3. Standard 5 Color Bands 4. Arranged Neatly to Avoid Bending 5. Much Better Performance than Carbon Equivalent
- Resistance Assortment Values: 1R 1.5R 2.2R 3.3R 4.7R 5.1R 10R 20R 22R 33R 47R 51R 100R 120R 150R 200R 220R 240R 270R 300R 330R 470R 510R 560R 680R 820R 1K 1K2 1K5 2K 2K2 2K4 2K7 3K 3K3 4K7 5K1 6K8 9K1 10K 15K 20K 22K 30K 33K 47K 51K 68K 100K 150K 200K 220K 300K 330R 390K 470K 680K 1M 2M2 4M7 R ohm kohm megaohm
- Power: 1/4w (0.25w) watt, TOL: 1%, Diameter: 2.3mm, Film Length : 6mm, Axial Leads End: 25mm, 300 pcs Pieces Single Fixed Resistor with Line
- Feature : High Stability, Low Noise, Low Temp Coefficient, Precision Characteris Tics ohms, Long Working Life Resister
- Application : For/on Precise Electronic Circuits, Arduino, Electronic And Electrical Communication Equipments, Musical Instrument or Applications,Electronics
- See more on Amazon...
Brand: CHANZON | Manufacturer: CHANZON
Dimensions: 0.71 x 9.25 x 7.09 Inches
See On Amazon #4
Twidec/4Pcs 50W 8Ohm LED Load Resistors For Fix LED Hyper Flash Turn Signal Light Bulb Fast Blink Error Code Warning Cancellor RX24-50W8-4X
Asin: B07YJMP48L | Model: RX24-50W8-4X | PartNumber: RX24-50W8-4X | Ean: 0704768700676 | UPC: 704768700676
Solution For "Bulb Out Signal" / "Obc Error Message" After Installing Smd Led Light Bulb. Solution For Fast Turn Signal Blinking Response After Installing Led Light Bulb..
If Led Load Resistor Will Not Solve Led Bulbs Flashing Issue, Which Mean The Led Bulb Is Defective.Easy Installation:Just Connect The Wires With The Splice Taps Provided..
Load Resistors Heat Up Like Light Bulbs And Get Really Hot When Working.Please Keep Resistors Inchs Away From Plastic Parts..
8 Ohm 50W Led Load Resistors Will Control The Current Flow In Electrical Circuits. Usually Each Led Bulb Installation Requires One Resistor Connected In Parellel..
Features
- It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.One-year warranty.
- 8 Ohm 50W LED Load Resistors will control the current flow in electrical circuits. Usually each LED bulb installation requires one resistor connected in parellel.
- Solution for bulb out signal / OBC error message after installing SMD LED light bulb. Solution for Fast Turn Signal Blinking response after installing LED light bulb.
- Load Resistors heat up like light bulbs and get really HOT when working.Please Keep resistors inchs away from plastic parts.
- If LED load resistor will not solve LED bulbs flashing issue, which mean the LED bulb is defective.Easy Installation:Just connect the wires with the splice taps provided.
- See more on Amazon...
Brand: Twidec | Manufacturer: Twidec
See On Amazon #5
Xuhal 20 Pack 50W 6ohm Load Resistor Turn Signal LED Resistor Kit Fix Fast Flash Blink Error Code Flickering LED Light Resistor for LED Lights Bulb Headlights Tail Light License Plate Lights DRL(Gold)
Asin: B0C1BM9KSX | Model: XIL0890 | PartNumber: XIL0890
Convenient To Install: 6 Ohm 50W Led Resistors For Led Lights Are Easy To Install, You Just Need To Attach One Side To The Positive Wire Which Receives 12 Volts When The Turn Signal Is On, And The Other Side To The Ground Wire; Generally A Resistor In Parallel Is Required For Each Led Bulb Installation.
Warning Notice: Led Taillight Resistor Will Get Very Hot, Like Halogen Bulbs, Please Mount Them Firmly On A Metal Surface And Keep Away From Any Plastic Parts, Hoses Or Painted Surfaces To Avoid Melting The Plastic.
Fix Lighting Errors: 6 Ohm 50W Led Light Resistor Can Effectively Solve The Turn Signals Problems Of Excessive Flashing Or Non Flashing, Like Signal Lights Flashing Wrong, Not Flashing, Bulb Burnt Out Indication, Led Turn Signal, Parking Lights, Running Lights, License Lights, Board Lights, For Error Flashing, Available On Most Vehicles.
Reliable Material: Led Resistor Turn Signal Is Made Of Quality Alloy Material, Not Easy To Deform Or Break, 50Watt, 6 Ohm For Each, Suitable For Long Term Use, Bringing You Fluent Using Experience.
Features
- Abundant to Choose: you will receive 20 pieces of load resistors LED turn signal, each resistor contains 2 pieces T Tap wire connectors, the quantity is enough for your daily needs and replacement demands, sharing them with others is also nice
- Reliable Material: LED resistor turn signal is made of quality alloy material, not easy to deform or break, 50watt, 6 ohm for each, suitable for long term use, bringing you fluent using experience
- Convenient to Install: 6 ohm 50W LED resistors for LED lights are easy to install, you just need to attach one side to the positive wire which receives 12 volts when the turn signal is on, and the other side to the ground wire; Generally a resistor in parallel is required for each LED bulb installation
- Fix Lighting Errors: 6 Ohm 50W LED light resistor can effectively solve the turn signals problems of excessive flashing or non flashing, like signal lights flashing wrong, not flashing, bulb burnt out indication, LED turn signal, parking lights, running lights, license lights, board lights, for error flashing, available on most vehicles
- Warning Notice: LED taillight resistor will get very hot, like halogen bulbs, please mount them firmly on a metal surface and keep away from any plastic parts, hoses or painted surfaces to avoid melting the plastic
- See more on Amazon...
Brand: Xuhal | Manufacturer: Xuhal
See On Amazon #6
Ouzorp 6Pcs 50W 6ohm Load Resistors, Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
Asin: B0B73ZPJ38 | Model: LY-50 | PartNumber: LY-50 | Ean: 0768488693014 | UPC: 768488693014
Fixes Light Errors - The Ouzorp Led Load Resistors Fixes Your Led Lights So They Can Function Properly. This Will Solve Led Related Turn Signal Lights Or License Plate Light Problems Such As Hyper Flashing, No Flashing Or Burnt Out Bulb Indications..
When You Receive The Goods, If There Are Any Problem, Please Contact Us And Do Not Directly Open The Dispute. We Promise We Will Give You A Satisfied Solution After We Confirmed It. We Also Will Give You A Positive Evaluation..
Easy Installation - The Ouzorp Led Load Resistors Installs Easily. Simply Connect One Wire Of The Resistor To The Ground And The Other One To The Positive Wire. The Resistor Should Run Parallel To Each Other..
Reduces Current Flow - The Ouzorp Led Load Resistors Acts To Reduce Current Flow, And, At The Same Time, Act To Lower Voltage Levels Within Circuits. In This Case, They Are Used To Simulate The Load Of A Regular Filament Bulb (2 Amp Load)..
Features
- The Ouzorp Tech LED load resistors are constructed from premium quality materials to ensure maximum strength and durability for long lasting usage.One LED resistor is required for each turn signal bulb or each license plate light bulb.
- REDUCES CURRENT FLOW - The Ouzorp LED load resistors acts to reduce current flow, and, at the same time, act to lower voltage levels within circuits. In this case, they are used to simulate the load of a regular filament bulb (2 Amp load).
- FIXES LIGHT ERRORS - The Ouzorp LED load resistors fixes your LED lights so they can function properly. This will solve LED related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications.
- EASY INSTALLATION - The Ouzorp LED load resistors installs easily. Simply connect one wire of the resistor to the ground and the other one to the positive wire. The Resistor should run parallel to each other.
- When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation.
- See more on Amazon...
Brand: Ouzorp | Manufacturer: Ouzorp
Warranty: 1 YEAR
See On Amazon #7
ESEWALAS 50W 6Ohm LED Resistor with Wire and Clip,Led Turn Signal Load Resistor Resistance Load Protection,LED Load Resistor for Fix LED Bulb (2Pcs)
Asin: B0C2V45PXC | Model: 347DZQ001 | PartNumber: 347DZQ001
[Aluminum Housing Resistor] Led Load Resistors Are Made Of High-Grade Aluminum And Have The Characteristics Of Anti-Corrosion And Anti-Aging. They Are Small In Size, Light In Weight, Durable, And Can Be Used In Harsh Environments..
[Function] Led Flasher Resistors Can Generally Be Used For Led Car Taillights, Frequency Converters, Car Braking Equipment, Large Power Supplies, And Industrial Control Equipment. The Decoding Resistor Accurately Decodes And Eliminates Most Error Codes Of Led Headlights..
[Simple Operation] The Installation Of The Load Resistor Is Simple, Plug And Play, Without The Need For Professional Technology, And The Operation Is Simple..
[Parameter] Resistance Value: 6 Ohms; Rated Power: 50W; Tolerance: 0.05 ± 5%.
Features
- [Package Includes] The package includes 2 resistors with 4 clips, and 4 resistors with 8 clips.
- [Parameter] Resistance value: 6 ohms; Rated power: 50W; Tolerance: 0.05 5%
- [Aluminum Housing Resistor] LED load resistors are made of high-grade aluminum and have the characteristics of anti-corrosion and anti-aging. They are small in size, light in weight, durable, and can be used in harsh environments.
- [Simple Operation] The installation of the load resistor is simple, plug and play, without the need for professional technology, and the operation is simple.
- [Function] LED flasher resistors can generally be used for LED car taillights, frequency converters, car braking equipment, large power supplies, and industrial control equipment. The decoding resistor accurately decodes and eliminates most error codes of LED headlights.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
Warranty: no
See On Amazon #8
mxuteuk 4pcs 50W 6ohm Hyper Flash Resistor Car Load Resistors for Fix LED Bulb Fast Hyper Flash LED Turn Signal Lights, Fix Error Flash Controller, with 8pcs Quick wire Clip 50W-6RJ-4
Asin: B0838XK73Q | Model: 50W-6RJ-4 | PartNumber: 50W-6RJ-4
★One Led Resistor Is Required For Each Turn Signal Bulb Or Each License Plate Light Bulb.It Can Work On Any Vehicle And Can Be Connected Across The Turn Signal Bulbs Or License Plate Lights To Simulate The Load Of A Regular Filament Bulb..
★Package Include: 4Pcs X 50W 6Ohm Load Resistors + 8Pcs X T-Taps..
★Tips - Each Led Turn Signal Required One Resistor, But Some Motorcycles Might Require More Than One Per Indicator Depending On The Original Wattage And Other Aftermarket Led Indicators/ Resistors Fitted..
★Load Resistors For Led Turn Signal Light Fix Or Led License Plate Lights Error Fix. This Will Solve Led Related Turn Signal Lights Or License Plate Light Problems ,No Flashing Or Burnt Out Bulb Indications Load Resistors Get Really Hot When Working. Mount It On Metal Surface, Not Plastic..
Features
- High Quality Material - Made of high quality materials, these in-line resistors are durable and can be used for a long time.
- Load Resistors for LED Turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve LED related turn signal lights or license plate light problems ,no flashing or burnt out bulb indications Load Resistors get really HOT when working. Mount it on metal surface, NOT plastic.
- One LED resistor is required for each turn signal bulb or each license plate light bulb.It can work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb.
- Tips - Each LED turn signal required one resistor, but some motorcycles might require more than one per indicator depending on the original wattage and other aftermarket LED indicators/ resistors fitted.
- Package include: 4Pcs x 50W 6ohm Load resistors + 8Pcs x T-Taps.
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #9
4Pcs Load Resistors 50W 6ohm, Fix LED Bulb Fast Hyper Flash, Turn Signal Blink Error Code, LED Turn Signal Resistor Flasher Adaptor Flash Fix Error for LED Turn Signal Lights
Asin: B0C8TKWJ6W
Universal: Work On Any Vehicle; Can Be Connected Across The Turn Signal Bulbs Or License Plate Lights To Simulate The Load Of A Regular Filament Bulb (2 Amp Load).
Attention: Not Designed For Consistant Working Bulbs( Day Time Running Light, Fog Light, Headlight Led Bulbs). Resistors May Become Very Hot To Melt Plastic Parts Nearby..
Universal Fitment: Simply Swap With Your Vehicle's Standard Relay, This Flasher Relay Controller Will Solve Led Light Flash Error, No Flashing, Hyper Flashing Or Obc Error Messages Problems.
Fix Lighting Errors: Our Led Load Resistors Will Fix Your Led Lights Problems Such As Blinker Flash Error, No Flashing Or Burnt Out Bulb Indications, Hyper Or Error Flashing Of Led Turn Signal, Parking, Driving Running Light Or License Plate Light.
Features
- 4PCS 50W 6Ohm LED Load Resistors: The Resistors Will Control the Current Flow in Electrical Circuits, A Best Solution for "Bulb Out Signal" / "OBC Error Message" after Installing SMD LED Light Bulb
- Fix lighting Errors: Our LED Load Resistors will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal, parking, driving running light or license plate light
- Universal: Work on any vehicle; can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load)
- Universal Fitment: Simply Swap with Your Vehicle's Standard Relay, This Flasher Relay Controller will Solve LED Light Flash Error, No Flashing, Hyper Flashing or OBC Error Messages Problems
- Attention: Not designed for consistant working bulbs( Day time running light, fog light, headlight LED bulbs). Resistors may become very hot to melt plastic parts nearby.
- See more on Amazon...
Brand: RBOKO | Manufacturer: RBOKO
See On Amazon #10
2 PCS Load Resistor,LED Turn Signal Resistor Flasher Adaptor with Wire and Clip,50W 6ohm LED Load Resistors Conversion Kit for Fix LED Bulb Hyper Flash Turn Signal Light Bulb Fast Blink Error Code (2)
Asin: B0BNHP4BDQ | Model: DZ001 | PartNumber: DZ001
[High Quality Aluminum] The Solid All Metal Structure Helps To Dissipate Heat And Increase Durability. These Resistors Are Well Processed And Have No Problem With Durability!.
[Function] To Repair The Flashing Error, Over Lighting Or Error Of Led Turn Signal Lamp, Stop/Driving Driving Lamp Or License Plate Lamp, The Resistor Will Control The Current In The Circuit, Which Is The Best Solution For "Bulb Off Signal"/"Obc Error Message" After Installing Smd Led Bulb..
[Small Volume] These Resistors Are Small, Light And Compact, And Suitable For Narrow Spaces..
[Power] The Power Of The Resistor Is 50W, With 6 Ohm Wiring..
Features
- [Two Sets] There are two sets of resistors: 2 resistors with 4 clips, 4 resistors with 8 clips. You can buy a suit according to your needs.
- [Power] The power of the resistor is 50W, with 6 ohm wiring.
- [High Quality Aluminum] The solid all metal structure helps to dissipate heat and increase durability. These resistors are well processed and have no problem with durability!
- [Small Volume] These resistors are small, light and compact, and suitable for narrow spaces.
- [Function] To repair the flashing error, over lighting or error of LED turn signal lamp, stop/driving driving lamp or license plate lamp, the resistor will control the current in the circuit, which is the best solution for bulb off signal/OBC error message after installing SMD LED bulb.
- See more on Amazon...
Brand: Reswish | Manufacturer: Reswish
Warranty: no
See On Amazon #11
4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code(Resistor gets very hot during working)
Asin: B00UNG3EXQ | Model: ARTR-50W-6ohm-4 | PartNumber: ARTR-50W-6ohm-4 | Ean: 0713331139041, 7258006575333, 7294104174368 | UPC: 713331139041
Load Resistors Heat Up Like Light Bulbs And Get Really Hot When Working. Mount Them On Metal Surface, Not Plastic..
You May Connect The Wires With The Splice Taps Provided(Quick But Maybe Not Solid). Or You May Cut The Wires And Connect Them More Solidly..
Design For Low Power Turn Signal Led Bulbs. Not Recommended For Other Led Bulbs..
Solution For "Bulb Out Signal" / "Obc Error Message" After Installing Smd Led Light Bulb. Solution For Fast Turn Signal Blinking Response After Installing Led Light Bulb..
Features
- Package include: 4PCS 50W 6ohm Load resistors and 8Pcs T-Taps. Mounting screw not included.
- Solution for bulb out signal / OBC error message after installing SMD LED light bulb. Solution for Fast Turn Signal Blinking response after installing LED light bulb.
- Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic.
- Design for low power turn signal LED bulbs. Not recommended for other LED bulbs.
- You may connect the wires with the splice taps provided(quick but maybe not solid). Or you may cut the wires and connect them more solidly.
- See more on Amazon...
Brand: ARTR | Manufacturer: ARTR
Dimensions: 0.70 x 5.00 x 4.70 inches | Weight: 0.02 pounds
See On Amazon #12
50W 6Ohm LED Load Resistors for 1157 BAY15D LED Turn Signal Lights (Fix Hyper Flash, Warning Cancellor) with 8pcs Quick Wire Clips, especially for 1157 White/Amber Switchback LED
Asin: B07S6N2HMT | Ean: 0601116341737 | UPC: 601116341737
【Easy Installation】 With 13Mm Wire At Each End Of The Resistor And T-Taps. Just Connect The Wires With The Splice Taps Provided. No Wire Cutting Is Necessary. One Led Resistor Is Required For Each Turn Signal Bulb..
【Test For Sale】 Our Items Are Tested For Sale. Please Buy With Confidence. We Offer "2 Years" Warranty, Replacement Or Refund. If You Have Any Question About The Load Resistors, Please Feel Free To Contact Us For Help..
【Attention】 Load Resistors Get Really Hot When Working. Mount It On Metal Surface, Not Plastic. Please Don't Touch It When The Led Light Is On..
【Function】 It Can Work On Any Vehicle And Can Be Connected Across The Turn Signal Bulbs To Simulate The Load Of A Regular Filament Bulb (2 Amp Load). Fix Blinker Flash Error, Hyper Or Error Flashing Of 1157(Bay15d) Led Turn Signal Light..
Features
- 4pcs 50 watts 6Ohm Load Resistors + 8pcs Quick Wire Clips Load Resistors for 1157(BAY15D) LED Turn Signal Light Fix, this will solve LED related turn signal lights problems, no flashing or burnt out bulb indications.
- Function It can work on any vehicle and can be connected across the turn signal bulbs to simulate the load of a regular filament bulb (2 Amp load). Fix blinker flash error, hyper or error flashing of 1157(BAY15D) LED turn signal light.
- Easy installation With 13mm wire at each end of the resistor and T-Taps. Just connect the wires with the Splice taps provided. No wire cutting is necessary. One LED resistor is required for each turn signal bulb.
- Attention Load Resistors get really HOT when working. Mount it on metal surface, NOT plastic. Please don't touch it when the LED light is on.
- Test for sale Our items are tested for sale. Please buy with confidence. We offer 2 Years Warranty, replacement or refund. If you have any question about the Load Resistors, please feel free to contact us for help.
- See more on Amazon...
Brand: GLL | Manufacturer: Grandview
Dimensions: 0.87 x 1.97 x 0.67 inches
See On Amazon #13
8-Pack 50W 6Ohm LED Load Resistors, Automotive Replacement Resistors for Flickering LED Turn Signal Light & LED License Plate Lights & DRL
Asin: B08L4GVRGZ | Model: Z-328-Orange | PartNumber: Z-328-Orange | Ean: 0784115151771 | UPC: 784115151771
Universal Fit: The 50W 6 Ohm Led Load Resistors Are Compatible With Any Car. Led Load Resistor Will Get Hot, Please Don't Mount The Led Load Resistors On Plastic, Hoses Or Painted Surfaces. Don't Touch By Hand Directly..
If You?Re Unsatisfied With This Item For Any Reason, Please Feel Free To Contact Us. We Will Help You To Solve Problems Within 24 Hours..
Easy Installation: Just Connect One Wire To Ground And The Other Wire To The Turn/Brake Wire. Please Apply The Provided Quick Wire Clip So That You Don?T Have To Cut Any Existing Wires. One Load Resistor Is Required For Each Turn Signal Bulb..
Control Current Flow: The 50W 6Ohm Led Load Resistors Can Control The Current Flow In Electrical Circuits. Put A Specific Amount Of Resistance Into Your Led Lights To Make It Function Properly..
Features
- Fix Light Errors: The load resistors can fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal, parking / driving running light or license plate light.
- Control Current Flow: The 50W 6ohm LED load resistors can control the current flow in electrical circuits. Put a specific amount of resistance into your LED lights to make it function properly.
- Universal Fit: The 50W 6 Ohm LED load resistors are compatible with any car. LED Load Resistor will get hot, please don't mount the LED load resistors on plastic, hoses or painted surfaces. Don't touch by hand directly.
- Easy Installation: Just connect one wire to ground and the other wire to the turn/brake wire. Please apply the provided quick wire clip so that you don?t have to cut any existing wires. One load resistor is required for each turn signal bulb.
- If you?re unsatisfied with this item for any reason, please feel free to contact us. We will help you to solve problems within 24 hours.
- See more on Amazon...
Brand: ZUDKSUY | Manufacturer: ZUDKSUY
See On Amazon #14
LivTee 4Pcs 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
Asin: B07RB12HHQ | Ean: 0710825809886 | UPC: 710825809886
Notice! Load Resistors Heat Up Like Light Bulbs And Get Super Hot When Working. Make Sure You Mount Them Away From Any Wires Or Plastic..
Easy Installation. Just Connect The Wires With The Splice Taps Provided And No Wire Cutting Is Necessary..
One Resistor Is Required For Each Turn Signal Bulb Or Each License Plate Light Bulb..
Prevent Led Turn Signal Lights Or Led License Plate Lights From Hyper Flashing, Malfunction Or Trigger Warning Message On Dashboard..
Features
- 4Pcs 50W 6ohm Load Resistors + 4pcs Quick wire Clip.
- Prevent LED Turn Signal Lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard.
- NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic.
- One resistor is required for each turn signal bulb or each license plate light bulb.
- Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
See On Amazon #15
Chanzon 2pcs Wirewound Aluminum Shell Resistor 4 ohm 100W 5% Tolerance 4R Rohs Certified
Asin: B08QRXXY93 | Model: DZ-LKDZ100WB5-4R-2 | PartNumber: DZ-LKDZ100WB5-4R-2
Dimension : 70X29x15.5Mm/2.8X1.1X0.6 Inch(L*W*H), Length Without Pin : 11Mm, Small Size, High Power Load, Standard And Non-Inductive Winding Types.
Suitable For Inverter, Led Lights, Speakers, Frequency Divider, Servo Industry, Speaker Equipment And Other Industrial Control, Widely Used In Power Supply, Transducer, Elevator, Arena Audio, Tail Light..
High Insulating Capacity, Good Performance In Vibration..
2 Pieces Aluminum House Resistors For Heat Dissipation, Suitable For Cooling Plate Installation, Can Be Used In Atrocious Environment..
Features
- Fix Resistance : 4R ohms, Power : 100 W watt, Tolerance : 0.05 5%
- 2 Pieces Aluminum House Resistors for Heat Dissipation, Suitable for Cooling Plate Installation, Can be Used in Atrocious Environment.
- Dimension : 70x29x15.5mm/2.8x1.1x0.6 inch(L*W*H), Length Without Pin : 11mm, Small Size, high Power Load, Standard and Non-inductive Winding Types
- High Insulating Capacity, Good Performance in Vibration.
- Suitable for Inverter, LED Lights, Speakers, Frequency Divider, Servo Industry, Speaker Equipment and Other Industrial Control, Widely used in Power Supply, Transducer, Elevator, Arena Audio, Tail Light.
- See more on Amazon...
Brand: CHANZON | Manufacturer: CHANZON
Dimensions: 0.73 x 6.30 x 5.51 inches | Weight: 72.00 Grams
See On Amazon #16
Osilly 50W 6Ohm Load Resistors, 4pcs Car LED Decoder Resistors, Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code for Auto Headlights Fog Lights DRL, with 8pcs Quick Wire Clip (Black)
Asin: B0CJHTZGD2 | Model: Load Resistors | PartNumber: Load Resistors
【Package】: 4Pcs 50W 6Ohm Load Resistor + 8Pcs Quick Wire Clips, Compatible With Most Vehicles. Usually, Each Car Led Bulb Needs To Connect A Resistor When Installing..
【Attention】: The Car Led Load Resistor Will Heat Up Like A Light Bulb, And The Temperature Will Be Super High During Operation, Which May Cause Nearby Plastic Parts To Melt. Please Install It On A Metal Surface Away From Plastic And Wires..
【Installation】: Very Simple, Just Connect One Wire Of The Car Load Resistor To The Ground And The Other Wire To The Positive Wire. The Quick Wire Clip In The Package Can Simplify The Installation..
【Application】: Our Car Decoder Resistor Can Solve The Problems Of Super Flash, No Flash Or Burnt Out Bulb For Led Turn Signal, Fog Lights, Headlights, Daytime Running Lights (Drl) Or License Plate Brake Lights, Repair The Led Light And Make It Work Normally..
Features
- Material : This car LED load decoder resistor is made of high quality aluminum, high temperature resistant, with excellent heat dissipation, good conductivity, waterproof and dustproof, long service life.
- Application : Our car decoder resistor can solve the problems of super flash, no flash or burnt out bulb for LED turn signal, fog lights, headlights, daytime running lights (DRL) or license plate brake lights, repair the LED light and make it work normally.
- Package : 4pcs 50W 6Ohm load resistor + 8pcs quick wire clips, compatible with most vehicles. Usually, each car LED bulb needs to connect a resistor when installing.
- Installation : Very simple, just connect one wire of the car load resistor to the ground and the other wire to the positive wire. The quick wire clip in the package can simplify the installation.
- Attention : The car LED load resistor will heat up like a light bulb, and the temperature will be super high during operation, which may cause nearby plastic parts to melt. Please install it on a metal surface away from plastic and wires.
- See more on Amazon...
Brand: Osilly | Manufacturer: Osilly
Dimensions: 0.30 x 3.00 x 0.50 inches
Warranty: 0.2
See On Amazon #17
ELOOGAA led Resistor kit 600 Pcs 30 Values Resistor Kit 10 Ohm-1M Ohm with 1% 1/4W Carbon Film Resistors Assortment,200Pcs 5Colors 3mm&5mm LED Light Emitting Diode for Arduino Projects
Asin: B09XYRMF3V | Model: El08# | PartNumber: El08# | Ean: 0747976848570 | UPC: 747976848570
These Resistor Kits Including 30 Different Values: 10Ω, 22Ω, 47Ω, 100Ω, 150Ω, 200Ω, 220Ω, 270Ω, 330Ω, 470Ω, 510Ω, 680Ω, 1Kω, 2Kω, 2.2Kω, 3.3Kω, 4.7Kω, 5.1Kω, 6.8Kω, 10Kω, 20Kω, 47Kω, 51Kω, 68Kω, 100Kω, 220Kω, 300Kω, 470Kω, 680Kω, 1Mω,To Fulfill Your Variety Requirement..
Upgrade Version Resistors With ±1% Tolerance Range, 1/4W Film And Thicker Metal Pins To Have A Better Connection And Stable Performance Features Which Help You Finish The Electrical Experiments Project Faster And More Smoothly.
600Pcs Resistor Kit :1% 1/4W Metal Film Resistor Assorted Kit,1% Tolerance,30 Values, 20Pcs Each Value..
Features
- 200pcs LED Kit :3mm and 5mm LED Diodes Kit, 200 pieces super bright leds, 5 color (white,red, blue,green,yellow)
- 600Pcs Resistor Kit :1% 1/4W metal film resistor assorted kit,1% tolerance,30 values, 20pcs each value.
- These resistor kits including 30 different values: 10 , 22 , 47 , 100 , 150 , 200 , 220 , 270 , 330 , 470 , 510 , 680 , 1K , 2K , 2.2K , 3.3K , 4.7K , 5.1K , 6.8K , 10K , 20K , 47K , 51K , 68K , 100K , 220K , 300K , 470K , 680K , 1M ,to fulfill your variety requirement.
- Upgrade version resistors with 1% tolerance range, 1/4w film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly
- See more on Amazon...
Brand: Eloogaa | Manufacturer: Eloogee
Dimensions: 1.18 x 7.60 x 5.51 inches
See On Amazon #18
Alla Lighting 2pcs 50W 6ohm Load Resistors - Fix LED Turn Signal Bulb Fast Hyper Flash Blinking Error Code Malfunction
Asin: B078SGCKHJ | Model: Alla-50W-6ohm-Load-Resistor | PartNumber: Alla-50W-6ohm-Load-Resistor
Load Resistors Heat Up Like Light Bulbs And Get Really Hot When Working. Mount Them On Metal Surface, Not Plastic..
Each Led Bulb Installation Requires One Resistor Connected In Parellel, One Year Warranty.Alla Lighting,Amazon Branded Registry & Reliable Us Seller, Provides Worldwide Best Customer Service For Our Customers.
Installation Is Easy. Just Connect The Wires With The Splice Taps Provided And No Wire Cutting Is Necessary..
Solution For Fast Turn Signal Blinking Response After Installing Smd Led Light Bulb..
Features
- (Set of 2) Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb.
- Solution for Fast Turn Signal Blinking response after installing SMD LED light bulb.
- Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic.
- Installation is easy. Just connect the wires with the splice taps provided and no wire cutting is necessary.
- Each LED bulb installation requires one resistor connected in parellel, one year warranty.Alla Lighting,Amazon branded registry & reliable US seller, provides worldwide best customer service for our customers
- See more on Amazon...
Brand: Alla Lighting | Manufacturer: Alla Lighting
Dimensions: 0.70 x 2.00 x 0.70 inches
See On Amazon #19
AUXLIGHT 10Pcs Quality 50W 6ohm Load Resistors - Fix LED Bulb Hyper Flash/Error Code, Turn Signal Fast Blinker (Resistors get very hot during working)
Asin: B0CSN8211Y | Ean: 0803173710024 | UPC: 803173710024
【High Quality Material】 Auxlight Load Resistors Are Made Of Super-High Strength Aluminum Alloy, Not Easy To Deform Or Break, Ensuring Maximum Durability For Long-Term Use..
【Warning】 Load Resistors Heat Up Like Halogen Bulbs. They Get Really Hot When Working. Must Be Mounted To Metal Surface, Not Plastic. Keep Resistors Inches Away From Any Plastic Parts..
【Pretty Easy To Wire Up】 Simple Connect One Wire To Ground And The Other Wire To The Positive, Such As Turn/Brake Wire. Each Led Bulb Requires One Resistor Connected In Parellel (See Picture For Instruction)..
【Eliminate Lights Error】 Solution For Led Turn Signal Hyper Flashing/No Flash. Solution For Bulb Rapid Flicker, Bulb Out Indicator, Error Code On The Dash..
Features
- Specification 10Pcs 50W 6ohm Load resistors with 20Pcs T-Taps. Mounting screw not included. Vlotage: DC 12V, Operating Temperature: -65 - +200 .
- Eliminate Lights Error Solution for LED turn signal hyper flashing/no flash. Solution for bulb rapid flicker, bulb out indicator, error code on the dash.
- High Quality Material AUXLIGHT load resistors are made of super-high strength aluminum alloy, not easy to deform or break, ensuring maximum durability for long-term use.
- Pretty Easy to Wire Up Simple connect one wire to ground and the other wire to the positive, such as turn/brake wire. Each LED bulb requires one resistor connected in parellel (see picture for instruction).
- Warning Load Resistors heat up like halogen bulbs. They get really HOT when working. Must be mounted to Metal Surface, NOT plastic. Keep resistors inches away from any plastic parts.
- See more on Amazon...
Brand: AUXLIGHT | Manufacturer: AUXLIGHT
Dimensions: 0.59 x 1.96 x 1.18 inches
See On Amazon #20
Dreamseek 4Pcs 50w 6ohm Load Resistor Equalizer Fix Led Light Bulb Fast Hyper Flash Turn Signal Blink Error Code
Asin: B0B9SJRMN5
Work As Warning Canceller, Decoder, Capacitor, Or Blinker Rapid Flash Equalizer For Led Light Bulb Such As 1156, 1157, 3156, 3157, 7440, 7443 Etc..
Easy Installation:With Wire At Each End Of The Resistor And T-Taps.
Excellent Heat Dissipation.
Fix Blinker Flash Error, Hyper Or Error Flashing Of Led Turn Signal, Parking / Driving Running Light Or License Plate Light..
Features
- Compatible:Universal fit for all cars,trucks and suv
- Fix blinker flash error, hyper or error flashing of LED turn signal, parking / driving running light or license plate light.
- Work as warning canceller, decoder, capacitor, or blinker rapid flash equalizer for LED light bulb such as 1156, 1157, 3156, 3157, 7440, 7443 etc.
- Excellent heat dissipation
- Easy Installation:With wire at each end of the resistor and T-Taps
- See more on Amazon...
Brand: Dreamseek | Manufacturer: Dreamseek
Warranty: 12 Months Warranty
See On Amazon
Looking For Something Else?
Search