Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota
Asin: B07YS59DGJ | Model: 89208 | PartNumber: 89208 | Ean: 7427046750073
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Cam Pulley Holder – Great Holding Tool For Timing Belt Changes, Cam Seal Replacement, Cam Gear Removal, Camshaft Pulleys Installation Etc. Designed With Grooved Pins To Hold Camshaft Sprockets Stationary To Remove The Bolts, Which Will Work Well To Hold The Pulley To Stop It From Spinning While Tightening/Loosening The Bolt..
100% Satisfaction Guarantee: If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Premium Support & 12 Months’ Warranty..
Superior Quality – Made Of High Quality Steel With Black Finish For Durability And Perfect Match, Resisting Rust And Corrosion, Ensures A Long Term Service..
Harmonic Damper Pulley Holder – Prevent The Harmonic Damper Pulley From Rotating In The Process Of Removing And Setting The Final Torque Specification On The Pulley Bolt, Allowing Users To Easily Remove And Install The Crank Bolt On Many Toyota & Lexus Engines..
Features
- Fitment The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
- Harmonic Damper Pulley Holder Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
- Cam Pulley Holder Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt.
- SUPERIOR QUALITY Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service.
- 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Premium Support & 12 Months Warranty.
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon Similar To Universal Cam Pulley Holder Tool
#1
BETOOLL 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit Compatible with Honda and Acura Engines
Asin: B01F333OHY | Model: BET-HW3053 | PartNumber: BET-HW3053 | Ean: 0653461528141, 0745780992588 | UPC: 653461528141, 745780992588
Use With Square Socket Driver.> 1/2" Square Drive Use With Breaker Bar.
Backed By A Lifetime Replacement Guarantee..
Designed With Hardened Chrome Molybdenum Steel Construction.
This Socket Is Used To Maintain The Harmonic Damper Pulley Position While Removing/Installing The Pulley Bolt..
Features
- Professional grade 50mm socket (with offset design) for removing/installing many Acura and Honda engine crank bolts
- This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
- Use with square socket driver.> 1/2 square drive use with breaker bar
- Designed with hardened chrome molybdenum steel construction
- Backed by a lifetime replacement guarantee.
- See more on Amazon...
Brand: BETOOLL | Manufacturer: szbrt
Dimensions: 3.00 x 6.00 x 4.00 inches | Weight: 1.26 Pounds
See On Amazon #2
E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts
Asin: B07Q1W36L7 | Model: 1 | PartNumber: 1 | Ean: 7426928518497
Round Edge With Precision Fit Hole - Small Enough So That No Need To Remove Radiator Or Other Components To Access And Remove Harmonic Damper Pulley, Hole In Center Of Tool Allows Access To Removal Of Crank Shaft Bolt, Users Are Available To Hold Crankshaft While Tightening The Crank Bolt With A Torque Wrench.
100% Satisfaction Guarantee - If You're Not 100% Satisfied With This Tool, Simply Return It For A Full Refund In 30 Days, No Questions Asked Money Back Guarantee With 1 Year’S Warranty.
Package Included - 1 Crankshaft Damper Pulley Holding Holder Tool And 2 Crank Bolts.
Keep Crank Pulley Still - Prevent The Harmonic Damper Pulley From Rotating In The Process Of Removing And Setting The Final Torque Specification On The Pulley Bolt, Allowing Users To Easily Remove And Install The Crank Bolt On Many Toyota & Lexus Engines.
Features
- FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
- KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines
- ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench
- PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts
- 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year s warranty
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: Bird's wings
Dimensions: 2.10 x 7.00 x 4.50 inches
Warranty: 1 year warranty
See On Amazon #3
Orion Motor Tech Camshaft Holding Tool Kit, Engine Timing Alignment Holder Set with 303-1248 Cam Holders 303-1530 Chain Tensioner Holder Compatible with 3.5L 3.7L 4L Ford Lincoln Mercury
Asin: B0BLBZ53C6 | Model: B001ETT | PartNumber: B001ETT
Wide Compatibility: These Oem-Equivalent Engine Timing Alignment Holder Set Is Compatible With 3.5, 3.7, & 4.0L Ford V6 (2007-2014), 3.5, 3.7, & 4.0L Lincoln (2007-2014), And 3.5L Mercury (2007-2012).
Satisfaction Guaranteed: Order This Cam Locking Timing Tool Set With Storage Box With Your Peace Of Mind Assured Thanks To Omt’S Good Name, Strong 1 Year Warranty, And Friendly 24/7 Customer Service.
Durable Construction: Our Heavy-Duty Car Alignment Tools Are Made From Premium Carbon Steel With Black Oxide Coating For Superior Strength And Corrosion Resistance.
Precise Control: The 303-1248 Camshaft Holding Tools And 303-1530 Chain Tensioner Holder Firmly Fix The Parts In Place, And The Phaser Bolt Removal Socket Quickly Removes The Damaged Phaser Bolt From The Engine Cam, Facilitating Your Timing Chain And Belt Replacement, Phaser Bolt Change, Water Pump Maintenance, And More.
Features
- EASY CAM ALIGNMENT: Orion Motor Tech's camshaft alignment tool set securely locks your camshaft to the top dead center of the piston travel for accurate alignment so that you can service your camshaft with ease
- PRECISE CONTROL: The 303-1248 camshaft holding tools and 303-1530 chain tensioner holder firmly fix the parts in place, and the phaser bolt removal socket quickly removes the damaged phaser bolt from the engine cam, facilitating your timing chain and belt replacement, phaser bolt change, water pump maintenance, and more
- WIDE COMPATIBILITY: These OEM-equivalent engine timing alignment holder set is compatible with 3.5, 3.7, & 4.0L Ford V6 (2007-2014), 3.5, 3.7, & 4.0L Lincoln (2007-2014), and 3.5L Mercury (2007-2012)
- DURABLE CONSTRUCTION: Our heavy-duty car alignment tools are made from premium carbon steel with black oxide coating for superior strength and corrosion resistance
- SATISFACTION GUARANTEED: Order this cam locking timing tool set with storage box with your peace of mind assured thanks to OMT s good name, strong 1 year warranty, and friendly 24/7 customer service
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: B001ETTRD
Warranty: 1 Year Warranty
See On Amazon #4
ATPEAM Spanner Wrench Spanner Wrench Set with Variable Spanner Wrench Pins 15Pc Adjustable Spanner Wrench fits Camshaft pulleys, Crankshaft pulleys
Asin: B091FCSQDT | Model: AE-18-41 | PartNumber: AE-18-41 | Ean: 5438077638553
Durable Material: Pin Spanner Wrench With Manganese Phosphate Finish Provides Maximum Strength And Resistance To Corrosion; Wrench Is Adjustable From 1-1/4 Inch To 5 Inches (3.2 To 12.7Cm).
Storage Case: The Spanner Wrench Set Is Packed In A Heavy-Duty, Storage Case With Precision-Sized Compartments For Every Piece - Great For Storage And Transport While Lengthening The Life Of The Tool Set..
Works With Existing Tools : 12-Inch (30.5Cm) Long Pin Wrench Attaches To Your 1/2-Inch Drive Ratchet Or Breaker Bar For An Extended Reach And Added Torque.
Interchangeable Pins Size: Spanner Wrench Set Includes A 3.5Mm, 4Mm, 4.5Mm, 5Mm, 6Mm, 6.5Mm And 10Mm Pins For Optimal Versatility; Multiple Pin Sizes Allow You To Fix, Install, And Disassemble Accessories And Parts.
Features
- Adjustable Spanner Wrench Set: ATPEAM spanner wrench is suitable for your bike, motorcycle, scooter, or car; Universal in design and fits many different types of pulleys; Easily disassemble or install camshaft pulleys, pulley holders, and more
- Interchangeable Pins Size: spanner wrench set includes a 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 6.5mm and 10mm pins for optimal versatility; Multiple pin sizes allow you to fix, install, and disassemble accessories and parts
- Durable Material: pin spanner wrench with manganese phosphate finish provides maximum strength and resistance to corrosion; Wrench is adjustable from 1-1/4 inch to 5 inches (3.2 to 12.7cm)
- Works with Existing Tools : 12-inch (30.5cm) long pin wrench attaches to your 1/2-inch drive ratchet or breaker bar for an extended reach and added torque
- Storage Case: The spanner wrench set is packed in a heavy-duty, storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 2.05 x 12.68 x 4.41 inches | Weight: 1.98 pounds
See On Amazon #5
EUICAE Adjustable Wrench Clutch, Stainless Steel, 11.8in Length, Suitable for Different Distances and Sizes
Asin: B07HFFR9RR | Model: A0010 | PartNumber: A0010 | Ean: 0732755416408 | UPC: 732755416408
※Wide Applications: Adjustable Screw And Two Sizes Of Pin On Either Side Make This Spanner Wrench Suitable For Different Distances Between Slots And Different Sizes Of Slots..
※ Quality And Satisfaction Guarantee: Every Piece Of Product Has Been Carefully Checked Before Packaging. If You Are Not Satisfied With Your Purchase For Any Reason, Eurica Is Pleased To Refund You. We Stand Confidently Behind Our Products With Our Satisfaction Guarantee!.
※ Package Includes: 1 Spanner Wrench With 2 Detachable Pins Which Have Been Already Built-In..
※Dimension: Length: 11.8In (30Cm). Arms Opening Width: 0.6In-4.7In (1.5Cm-12Cm)..
Features
- If there are any problems in use,You do not need to return the product, please contact us, we will solve for you.
- Dimension: Length: 11.8in (30cm). Arms Opening Width: 0.6in-4.7in (1.5cm-12cm).
- Wide Applications: Adjustable Screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots.
- Package includes: 1 Spanner Wrench with 2 detachable pins which have been already built-in.
- Quality and Satisfaction Guarantee: Every piece of product has been carefully checked before packaging. If you are not satisfied with your purchase for any reason, EURICA is pleased to refund you. We stand confidently behind our products with our satisfaction guarantee!
- See more on Amazon...
Brand: EUICAE | Manufacturer: EUICAE
Dimensions: 1.18 x 10.63 x 3.54 inches
See On Amazon #6
BETOOLL Camshaft Holding Tool Timing Alignment Holder Tool Set Kit Compatible with 303-1248 303-1530 Ford 3.5L & 3.7L 4V
Asin: B075XJZ1DN | Model: HW9204 | PartNumber: HW9204 | Ean: 0745780993554, 0653461656776 | UPC: 653461656776, 745780993554
Vehicle Fitment:20072014 3.5L Edge 20112014 4.0L Edge 20112014 3.5L Explorer, F-150 20112014 3.7L F-150, Mkx 20112012 4.0L F-150, Mkx, Mustang 20122014 3.5L Flex 20102012 3.5L Fusion Hybrid 20072011 3.5L Milan 20102014 3.5L Mks, Mkt 20092014 3.7L Mks 20102014 3.7L Mkt 20072012 3.5L Mkx, Mkz 20132014 3.7L Mkz 20112014 3.7L Mustang 20082012 3.5L Sable 20082014 3.5L Taurus, Taurus X.
Coated With Black Oxide For Extended Tool Life,Machined From A3,Whichhard And Durablehelps Ensure Vehicle Maintenance Accuracy And Protection..
Helps Ensure Camshaft Alignment During Removal And Installationthe Timing Chain..
Features
- Use this toolaccurately position and align hold your Ford 3.5L & 3.7L camshaftTDCperform service.
- Helps ensure Camshaft alignment during removal and installationthe timing chain.
- Vehicle Fitment:20072014 3.5L Edge 20112014 4.0L Edge 20112014 3.5L Explorer, F-150 20112014 3.7L F-150, MKX 20112012 4.0L F-150, MKX, Mustang 20122014 3.5L Flex 20102012 3.5L Fusion Hybrid 20072011 3.5L Milan 20102014 3.5L MKS, MKT 20092014 3.7L MKS 20102014 3.7L MKT 20072012 3.5L MKX, MKZ 20132014 3.7L MKZ 20112014 3.7L Mustang 20082012 3.5L Sable 20082014 3.5L Taurus, Taurus X
- Coated with black oxide for extended tool life,machined from A3,whichhard and durablehelps ensure vehicle maintenance accuracy and protection.
- See more on Amazon...
Brand: BETOOLL | Manufacturer: szbrt
Dimensions: 3.00 x 11.00 x 9.00 inches | Weight: 4.41 Pounds
See On Amazon #7
Cam Pulley Holder Camshaft Pulley Holding Tool Fit for Nissan Toyota Camry OHC Maximas V6
Asin: B07LCB5LRD | Ean: 7426928510811
Application: Great Holding Tool For Timing Belt Changes, Cam Seal Replacement, Cam Gear Removal, Camshaft Pulleys Installation Etc..
Satisfaction Guarantee: If You're Not 100% Satisfied With This Cam Pulley Holder, Simply Return It For A Full Refund In 30 Days. Premium Support & 12-Month Warranty.
A Must-Have Tool: Using This Sturdy Tool To Hold Camshaft Sprockets Stationary To Remove The Bolts, Which Will Work Well To Hold The Pulley To Stop It From Spinning While Tightening/Loosening The Bolt.
Material: Made Of High Quality Steel For Durability And Perfect Match, Holding Strong For Both Loosening And Tightening Cam Pulley Bolts.
Features
- FITMENT: Fit for Nissan, Camry, Toyota, Mazda, OHC and many others ( please kindly check the size before purchase )
- MATERIAL: Made of high quality steel for durability and perfect match, holding strong for both loosening and tightening cam pulley bolts
- APPLICATION: Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc.
- A MUST-HAVE TOOL: Using this sturdy tool to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt
- SATISFACTION GUARANTEE: If you're not 100% satisfied with this Cam Pulley Holder, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #8
Mainshaft Sprocket Wrench for 1936-2006 Harley-Davidson Big Twins Engine & Twin Cam, 1 7/8 Inch Main shaft Pulley Socket Tool
Asin: B08GSCZSY9 | Model: 1 7/8 Inch Main shaft Pulley Socket | PartNumber: 1 7/8 Inch Main shaft Pulley Socket | Ean: 0641197085823 | UPC: 641197085823
Function –Designed To Remove & Install The 1 7/8'' Nut Locking The Trans Pulley In Position, Makes Changing Belts Pulleys Or Sprockets Easily And Quickly..
100% Satisfaction Guarantee -- If You're Not 100% Satisfied With This Tool, Simply Return It For A Full Refund In 30 Days. Premium Support & 12-Month Warranty..
Superior Quality – Made Of High Quality Steel Coated With Black Oxide Finish For Rust And Corrosion Resistain, Ensures An Unparalleled Long Lifespan..
Nice Design -- Back Of The Tool Has A 1/2" Drive, With A Threaded Bushing. The Tool Is 5.5 Inch Deep..
Features
- FITMENT-- This tool is a Main Shaft Sprocket Wrench Tool for all Harley front transmission pulley 1 7/8 socket sprocket. It will fit 1936-2006 Big Twins, 1999-2006 Twin Cam, except 06 Dyna.
- NICE DESIGN -- Back of the tool has a 1/2 Drive, with a Threaded Bushing. The tool is 5.5 inch deep.
- FUNCTION Designed to remove & install the 1 7/8'' nut locking the trans pulley in position, makes changing belts pulleys or sprockets easily and quickly.
- SUPERIOR QUALITY Made of high quality steel coated with black oxide finish for rust and corrosion resistain, ensures an unparalleled long lifespan.
- 100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #9
Harmonic Damper Pulley Holding Tool Crankshaft Holder compatible with Toyota Tacoma 4Runner T100 Tundra Pickup
Asin: B07NRGRYM1 | Model: 13 | PartNumber: 13 | Ean: 7426928512150
Nice Design: Unique Two Pins Design Holds The Harmonic Damper Pulley Compatible With Toyota 3.4 Liter V6 Engines For Crank Bolt R&R..
Satisfaction Guarantee: If You're Not 100% Satisfied With Your Harmonic Tool, Simply Return It For A Full Refund, Guarantee With 1-Year’S Warrant..
Excellent Function：Design To Seat The Pulley Properly, Holds The Pulley Stationary For The Center Bolt To Be Removed, Necessary For Both Removing And Installing..
Durable Material: Made Of High Quality Metal Material, Solid And Durable, Ensures A Long Term Service..
Features
- GREAT FITMENT: Fit for 4 Runner 1996-2002, T100 pickup 1996-1998, Tacoma pickup 1996-2004 and Tundra pickup 2000-2004.
- DURABLE MATERIAL: Made of high quality metal material, solid and durable, ensures a long term service.
- NICE DESIGN: Unique two pins design holds the harmonic damper pulley compatible with Toyota 3.4 liter V6 engines for crank bolt R&R.
- EXCELLENT FUNCTION Design to seat the pulley properly, holds the pulley stationary for the center bolt to be removed, necessary for both removing and installing.
- SATISFACTION GUARANTEE: If you're not 100% satisfied with your harmonic tool, simply return it for a full refund, guarantee with 1-year s warrant.
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #10
iFJF Crankshaft Positioning Tool Crankshaft Wrench Holder Compatible with 1993 Newer 4.2L/4.6L 2-Valve 4.6L 4-Valve 5.4L/6.8L V8 Engines Similar to Rotunda 303-448 T93P-6303-A 6024 525219
Asin: B085FRTWR9 | Ean: 0303277416766 | UPC: 303277416766
Avoid Damage:These Engines Are Not Free Wheeling Engines Meaning That If The Crankshaft Is Rotated During Timing Chain Installation(Jumped Timing),It Can Cause Significant Damage To The Pistons And Valves If The Cylinder Heads Are Not Removed..
Usage:This Tool Slides Easily Over The Crankshaft And Seamlessly Locks Into Place With The Wood Ruff Key.You Only Need To Rotate The Crankshaft With Tool Attached To Crank So That The Slot In The Handle Locks Into The Engine Cover Alignment Dowel Pin,Ensuring The Engine Is At The Correct Tdc Point Avoiding Extreme Damage And Costly Repairs..
Correct Installation Position:Easily Install Over The Crankshaft And Engine Front Cover Alignment Dowel To Position The Crankshaft At Top-Dead-Center..
Material:Hardened Chrome Molybdenum Steel And Coated With Black Oxide Finish.Resistance On Rust,Deformation And Crack.A Long Lasting Finish..
Features
- FITMENT:Replacement for 1993 and newer 4.2L 4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines while installing timing chains.Similar to Rotunda 303-448,6024,525219.
- MATERIAL:Hardened chrome molybdenum steel and coated with black oxide finish.Resistance on rust,deformation and crack.A long lasting finish.
- AVOID DAMAGE:These engines are not Free Wheeling engines meaning that if the crankshaft is rotated during timing chain installation(Jumped Timing),it can cause significant damage to the Pistons and Valves if the cylinder heads are not removed.
- CORRECT INSTALLATION POSITION:Easily install over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center.
- USAGE:This tool slides easily over the crankshaft and seamlessly locks into place with the wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs.
- See more on Amazon...
Brand: iFJF | Manufacturer: Y-autopart
See On Amazon #11
Sunluway for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts
Asin: B07Q29ZMMY | Model: 13 | PartNumber: 13 | Ean: 7426928512143
Nice Design: Designed To Hold The Crankshaft Pulley While Loosening Or Tightening The Centre Screw. Needn't To Remove Radiator Or Other Components To Access And Remove Harmonic Damper Pulley, Hole In Center Of Tool Allows Access To Removal Of Crank Shaft Bolt, Users Are Available To Hold Crankshaft While Tightening The Crank Bolt With A Torque Wrench..
Satisfaction Guarantee: If You're Not 100% Satisfied With This Harmonic Damper Pulley Holding Tool, Simply Return It For A Full Refund In 30 Days, Guarantee With 1-Year's Warranty..
Use Simplly: To Tighten Crankshaft Pulley By 2 Screws (M8 X 1.25) Extend Operation Needs 1/2" Drive Wrench. Prevent The Harmonic Damper Pulley From Rotating In The Process Of Removing And Setting The Final Torque Specification On The Pulley Bolt, Allowing Users To Easily Remove And Install The Crank Bolt Compatible With Toyota & Lexus Engines..
High Quality: Made Of High Quality-42Crmo Steel, Heavy Duty And Durable, Surface Coated With Black Paint To Ensure Resistance To Corrosion And Rust, Protection And Years Of Trouble-Free Use..
Features
- GREAT FITMENT: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7; and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
- HIGH QUALITY: Made of high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust, protection and years of trouble-free use.
- NICE DESIGN: Designed to hold the crankshaft pulley while loosening or tightening the centre screw. Needn't to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
- USE SIMPLLY: To tighten crankshaft pulley by 2 screws (M8 x 1.25) Extend operation needs 1/2 Drive Wrench. Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt compatible with Toyota & Lexus engines.
- SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Damper Pulley Holding Tool, simply return it for a full refund in 30 days, guarantee with 1-year's warranty.
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #12
USSKYBOY 58430 Shaft Type Seal Puller Universal Seal Puller for Most Auto and Motorcycles
Asin: B0BRCJGQML | Model: 58430 | PartNumber: 58430
【Premium Quality】Made Of High Quality Steel And Iron To Ensure High Strength And Durability. The Comfortable Handle Ensures Easy Operation And Has A Non-Slip Design..
【How To Use】(1) Find The Seal You Want To Remove, (2) Remove Anything That Will Hinder/Obstruct Its Removal (Ie Cam Pulley, Crank Pulley, Etc.), (3) Pick Up The 58430 Pulley And Place The End Piece (Small Black Hook) Into The Seal, (4) Adjust The Silver Bar Against Any Solid. And Pry Off The Old Seal Now!.
【Satisfaction Guarantee】 Provides A 100% Satisfied After-Sales Service. If You Are Not Satisfied With It, Simply Return It Within 30 Days For A Full Refund. Premium Support 1 Year Warranty..
【Upgraded Design】Engage The Adjustable Hook Behind The Seal, Support The Push Rod On The Engine Head, Then Push The Handle To Remove The Seal, Remove The Seal Without Damaging The Shaft..
【Function】Why Use A Screwdriver To Remove The Oil Seal? This Will Only Scratch The Metal Surface And You Will Create A Permanent And Irreparable Leak! The 58430 Shaft Seal Puller Will Easily Remove Camshaft And Crankshaft Seals Without Damaging The Shaft..
Features
- Wide Applications It is a universal seal puller that can be used for many shaft/seal disassembly.
- Function Why use a screwdriver to remove the oil seal? This will only scratch the metal surface and you will create a permanent and irreparable leak! The 58430 Shaft Seal Puller will easily remove camshaft and crankshaft seals without damaging the shaft.
- Premium Quality Made of high quality steel and iron to ensure high strength and durability. The comfortable handle ensures easy operation and has a non-slip design.
- Upgraded Design Engage the adjustable hook behind the seal, support the push rod on the engine head, then push the handle to remove the seal, remove the seal without damaging the shaft.
- How to use (1) Find the seal you want to remove, (2) Remove anything that will hinder/obstruct its removal (ie cam pulley, crank pulley, etc.), (3) Pick up the 58430 pulley and place the end piece (small black hook) into the seal, (4) adjust the silver bar against any solid. And pry off the old seal now!
- Satisfaction Guarantee Provides a 100% satisfied after-sales service. If you are not satisfied with it, simply return it within 30 days for a full refund. Premium Support 1 year Warranty.
- See more on Amazon...
Brand: USSKYBOY | Manufacturer: USSKYBOY
Dimensions: 1.40 x 8.00 x 2.20 inches
See On Amazon #13
Camshaft Holding Tool Cam Holder Retaining Tool Kit Replacement for J-44221 GM In-Line 6 Cylinder Compatible with 2004-2006 Chevrolet Colorado 2.8L.(Black)
Asin: B07QDHZWLF | Model: CAMHS | PartNumber: CAMHS | Ean: 0787794244888 | UPC: 787794244888
Replacement For Kmj44221, Otc-J-44221.
Please Kindly Confirm More Compatibility Details Before Purchase.
Compatible With 2004-2006 Chevrolet Colorado 2.8L，2004-2006 Gmc Canyon 2.8L，2002-2004 Oldsmobile Bravada 4.2L Vin S，2004-2006 Buick Rainier 4.2L Vin S，2002-2008 Chevrolet Trailblazer 4.2L Vin S，2002-2006 Gmc Envoy 4.2L Vin S，2004-2006 Chevrolet Colorado 3.5L Vin 5 5 Cylinder， 2004-2006 Gmc Canyon 3.5L Vin 5 5 Cylinder，2007-2012 2.9L Gmc Canyon，2007-2012 2.9L Chevy Colorado，2007-2012 3.7L Gmc Canyon，2007-2012 3.7L Chevy Colorado.
Features
- Hold on at the camshaft TDC position to ensure proper timing during do the cam, gear, chain work to prevent rotation. Make engine work effortless!
- Compatible with 2004-2006 Chevrolet Colorado 2.8L 2004-2006 GMC Canyon 2.8L 2002-2004 Oldsmobile Bravada 4.2L vin S 2004-2006 Buick Rainier 4.2L vin S 2002-2008 Chevrolet Trailblazer 4.2L vin S 2002-2006 GMC Envoy 4.2L vin S 2004-2006 Chevrolet Colorado 3.5L vin 5 5 cylinder 2004-2006 GMC Canyon 3.5L vin 5 5 cylinder 2007-2012 2.9L GMC Canyon 2007-2012 2.9L Chevy Colorado 2007-2012 3.7L GMC Canyon 2007-2012 3.7L Chevy Colorado
- Replacement for KMJ44221, OTC-J-44221
- Please kindly confirm more compatibility details before purchase
- See more on Amazon...
Brand: iFJF | Manufacturer: State Warehouse
Dimensions: 0.50 x 10.00 x 2.40 inches
See On Amazon #14
Yoursme for Lexus and Toyota Harmonic Damper Pulley Holder Crankshaft Crank Holding Removal Wrench Tool with 2PCS Crank Bolts
Asin: B07QPNNC55 | Model: DA784 | PartNumber: DA784 | Ean: 7426999798828
Superior Quality: Machined From High Quality 40Cr Steel, Providing Enough Strength And Durability; And Its Powder Coating Is Resistant To Cracking, Abrasion, Rust And Damage Due To Chemical Exposure.
Satisfaction Guarantee: Yoursme Aims To Provide The Best Service For Our Customer, If You're Not 100% Satisfied With Our Item, Simply Return It For A Full Refund In 30 Days, No Questions Asked Money Back Guarantee With 12 Months’ Warranty..
Great Design: Small Enough So That No Need To Remove Radiator Or Other Components To Access And Remove Harmonic Damper Pulley. The Hole In Center Of The Tool Allows Access To Removal Of Crank Shaft Bolt.
Application: Developed To Aid In The Removal And Installation Of The Crank Bolt On Lexus And Toyota Engines.
Features
- COMPATIBILITY: Compatible with Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
- APPLICATION: Developed to aid in the removal and installation of the crank bolt on Lexus and Toyota engines
- SUPERIOR QUALITY: Machined from high quality 40Cr steel, providing enough strength and durability; and its powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure
- GREAT DESIGN: Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley. The hole in center of the tool allows access to removal of crank shaft bolt
- SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months warranty.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
Dimensions: 2.10 x 7.00 x 4.50 inches
See On Amazon #15
DPTOOL Camshaft Holding Tool Timing Alignment Holder Tool Kit Compatible with Ford Lincoln Mercury 3.5L 3.7L 4V Engines Replace 303-1248 303-1530 OTC 6682 with RT11 Removal Socket and Portable Case
Asin: B0C1B741YJ | Model: HFORD1248 | PartNumber: HFORD1248
Sturdy And Durable: Made Of High Standard Structural Steel And Coated With Black Oxide Finish, It Is Excellent Solid With Great Durability. Plus, It Has Good Performance On Rust And Crack Resistance To Long-Lasting Service Your Engine.
Package Includes: Includes 2 X Camshaft Holding Tool, 1 X Tension Tool, 1 X Rt11 Cr-Mo Tool Of Removing Camshaft Screw And Portable Case. We Offer Lifetime Warranty, We Will Refund Or Replace, If The Product Have Any Quality Problem.
Professional Timing Tool: This Camshaft Timing Alignment Holder Tool Work Great Holding The Cams To Do A Water Pump. Easy To Used And Holds Great.Use This Tool To Accurately Position And Align Hold Your 3.5L & 3.7L Camshaft At Tdc To Perform Service.
Exact Match: This Camshaft Holding Tool Timing Tool Set Designed Specifically For Ford V6 3.5L & 3.7L Cyclone Engines, High Precision And Great Compatibility , And Through Rigorous Engine Testing, While Is Not A Genuine Original, It Is A Direct Replacement And Completely Fit, Better Than Spending $300 For A Car Factory Brand Tool.
Features
- Applicable Vehicle: Fit Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682
- Exact Match: This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending $300 for a car factory brand tool
- Sturdy and Durable: Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine
- Professional Timing Tool: This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service
- Package Includes: Includes 2 x Camshaft Holding Tool, 1 x Tension Tool, 1 x RT11 Cr-MO Tool of Removing Camshaft Screw and Portable Case. We offer lifetime warranty, we will refund or replace, if the product have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Warranty: 12 months warranty
See On Amazon #16
E-cowlboy Universal Wrench Camshaft Injection Pump Cam Pulley Holder Sprocket Holding Tool for Honda & Toyota
Asin: B07Q1KPDP2 | Model: Universal Wrench | PartNumber: Universal Wrench | Ean: 7426928518541
Function: This Holding Tool Is Used To Hold Camshaft Gears Stationary, Injection Pump, Other Gears And Pulleys For Both Loosening And Tightening Cam Pulley Bolts..
Satisfaction Guarantee: If You're Not 100% Satisfied With This Cam Pulley Holder, Simply Return It For A Full Refund In 30 Days, No Questions Asked Money Back Guarantee With 12 Months’ Warranty.
A Must Have Tool: Detent Grooves On Holding Pins Gives User A Sure Hold To Use As A Counter Holder When Loosening Or Tightening Sprocket Retainer Bolts.
Excellent Design: Made Of High Quality Steel For Durability And Perfect Match, Non-Slip Rubber Grip. Long Handle Enables Technician To Easily Hold The Pulley When Tightening Or Loosening Retaining Nuts And Bolts.
Features
- PERFECT FITMENT: Works on all models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5"), such as Audi, Dodge, Ford, GM, Honda, Mazda, Rover,Toyota, Volvo and so on
- EXCELLENT DESIGN: Made of high quality steel for durability and perfect match, non-slip rubber grip. Long handle enables technician to easily hold the pulley when tightening or loosening retaining nuts and bolts
- FUNCTION: This holding tool is used to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts.
- A MUST HAVE TOOL: Detent grooves on holding pins gives user a sure hold to use as a counter holder when loosening or tightening sprocket retainer bolts
- SATISFACTION GUARANTEE: If you're not 100% satisfied with this Cam Pulley Holder, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months warranty
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: Bird's wings
Warranty: 1 year warranty
See On Amazon #17
2 In 1 Garden Hose Guide, Universal 10 Inch Hose Guide Stakes With Barbs, Water Sprinkler Hose Guide Support Spike To Keep Hose off Lawn For Yard Lawn Garden Flower Beds Plant Saver Tool (6, Green)
Asin: B0BN7MMTHY
Material: The Garden Hose Holder Is Made Of High-Quality Pp Plastic, Strong, Waterproof And Corrosion-Resistant, And Can Be Used For A Long Time, Anchors Are Set On The Sides Of The Plant Pegs, Which Can Penetrate And Easily Locate Most Of The Turf To Fix The Hose In Place, Easy To Use. After A Long Time, The Anchor May Fall Off, Which Does Not Affect The Later Use..
Package Includes: Our Hose Guide Stakes Come In Two Colors, Green And Black, Packaged Separately In 2Pcs/6Pcs And 12Pcs, Individual Size: 10 Inches * 3.7 Inches, Universal, Suitable For Standard 5/8 Inch Water Pipes And Standard 3/4 Inch Water Pipe, You Can Choose The Right Quantity According To Your Needs..
Wide Application: This Garden Hose Guide Spike Protects Plants, Flowers And Shrubs By Guiding The Hose Away From The Bed Or Landscape Area To Prevent Damage. Compatible With Many Kinds Of Garden Hose Or Pressure Washer Hose, Ideal For Patio, Lawn, Garden, Patio, Greenhouse, Flower Beds, Woods, Etc., Ideal For Gardeners..
Save Money: Create An Above Ground Sprinkler System At A Lower Market Cost Than Any Other Solution. A Set Of 6 Hose Lift Organizers Lifts Garden Hoses Up To 15 Feet! The Water Hose Guide Can Be Used In Gardens, Lawns, You Can Leave The Hose On The Lawn When You Are On Vacation In Summer, Water The Lawn Without Worrying About Damaging Your Lawn..
Features
- 2 IN 1 HOSE GUIDES FOR GARDEN: The only design with two practical guidance modes: 1. Pinch the side of the hose with your index finger and thumb, then slide the garden hose between the two tips of the product to hold it in place 2. Just place the hose on the pipe rail for automatic sprinklers and other garden hoses, high pressure cleaning, guides garden hose away from flower beds, provides a path for hose, eliminates summer hose burn, and protects delicate plants from dragging Hose damage.
- SAVE MONEY: Create an above ground sprinkler system at a lower market cost than any other solution. A set of 6 hose lift organizers lifts garden hoses up to 15 feet! The water hose guide can be used in gardens, lawns, you can leave the hose on the lawn when you are on vacation in summer, water the lawn without worrying about damaging your lawn.
- MATERIAL: The garden hose holder is made of high-quality PP plastic, strong, waterproof and corrosion-resistant, and can be used for a long time, anchors are set on the sides of the plant pegs, which can penetrate and easily locate most of the turf to fix the hose in place, easy to use. After a long time, the anchor may fall off, which does not affect the later use.
- WIDE APPLICATION: This garden hose guide spike protects plants, flowers and shrubs by guiding the hose away from the bed or landscape area to prevent damage. Compatible with many kinds of garden hose or pressure washer hose, ideal for patio, lawn, garden, patio, greenhouse, flower beds, woods, etc., ideal for gardeners.
- PACKAGE INCLUDES: Our hose guide stakes come in two colors, green and black, packaged separately in 2pcs/6pcs and 12pcs, individual size: 10 inches * 3.7 inches, universal, suitable for standard 5/8 inch water pipes and standard 3/4 inch water pipe, you can choose the right quantity according to your needs.
- See more on Amazon...
Brand: whumsdog | Manufacturer: whumsdog
See On Amazon #18
LainKeen 15Pc Universal Camshaft Pulley Holder,Variable Pin Spanner Wrench Kit Adjustable Fan Clutch Pully Holder Wrench with Pins
Asin: B0CDGH2XD8 | Model: SK8375 | PartNumber: SK8375
Durable Steel Material With Manganese Phosphate Finish For Maximum Strength And Corrosion Resistance..
The Adjustable Spanner Wrench Set Is Packed In A Heavy-Duty, Blow-Molded Case With Precision-Sized Compartments For Every Piece - Great For Storage And Transport While Lengthening The Life Of The Tool Set..
Wrench Is Adjustable From 1-1/4 Inches To 5 Inches By Loosening Single Adjustment Bolt,Works With A 1/2 Inch Drive Ratchet Or Breaker Bar. For Optimal Versatility..
Set Includes The Following Pairs Of High-Strength Steel Pin Sizes: 3.5 Mm, 4 Mm, 4.5 Mm, 5 Mm, 6 Mm, 7 Mm, 10 Mm Plus A Heavy-Duty Steel Handle Assembly..
Features
- Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
- Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
- Durable steel material with manganese phosphate finish for maximum strength and corrosion resistance.
- Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt,works with a 1/2 inch drive ratchet or breaker bar. for optimal versatility.
- The adjustable spanner wrench set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
- See more on Amazon...
Brand: LainKeen | Manufacturer: LainKeen
See On Amazon #19
GEARWRENCH Universal Pulley Holder - 3900 15 Inch
Asin: B009TC8XGS | Model: 3900 | PartNumber: 3900 | Ean: 0013222026987, 0638084480380, 0700867515982, 0082171390005 | UPC: 013222026987, 700867515982, 638084480380, 082171390005
Applications For Use In Fan Clutch Removal Include: Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L, And 5.0-L Engines.
Gm Trucks W/4.3-L, 5.0-L And 5.7-L Engines.
Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 8.0-L And V10 Engines.
When Used In Conjunction With Fan Clutch Wrenches It Is Especially Useful In Removing And Replacing Thermostatic Fan Assemblies.
Features
- Unique Time Saving Tool is Designed to Trap and Hold Bolt-On Pulleys By the Mounting Bolts on Most Applications
- When Used in Conjunction With Fan Clutch Wrenches it is Especially Useful in Removing and Replacing Thermostatic Fan Assemblies
- Applications for Use in Fan Clutch Removal Include: Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L, and 5.0-L Engines
- Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 8.0-L and V10 Engines
- GM Trucks W/4.3-L, 5.0-L and 5.7-L Engines
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GEARWRENCH
Dimensions: 0.50 x 15.00 x 4.00 inches | Weight: 1.50 Pounds
See On Amazon
Looking For Something Else?
Search