BCZAMD 120V 500W Silicone Heating Pad 235 X 235mm Rubber Heater Mat with NTC 100K Thermistor Strong Adhesive for Crealit Ender 3 V2 3S Ender 5 3D Printer Heated Bed
Asin: B0814YRGGK | Model: AiUS Silicone Rubber Heater 235 | PartNumber: AiUS Silicone Rubber Heater 235 | Ean: 0738678971987 | UPC: 738678971987
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: BCZAMD | Manufacturer: Aimengda
See On Amazon Similar To BCZAMD 120V 500W Silicone Heating
#1
BCZAMD 3D Printer Heating Plate Adhesive Silicone Heated Mat 120V 750W with NTC 100K Thermistor No Hole for Crealit Ender 3 Max 3D Printer Parts 300 X 300mm (Approx. 12" X 12")
Asin: B07ZFPKHN5 | Model: AiUS Silicone Rubber Heater 300 | PartNumber: AiUS Silicone Rubber Heater 300 | Ean: 0738678971932 | UPC: 738678971932
Suggest Working Temperature: -62～200℃ ( Note: The Silicone Mat's Temperature Will Heats Up Quickly, Please Take Anti-Scalding Measures ! ).X300mm/ 12 X 12 Inch, Power: Ac 120V 750W.Surface Mount Ntc 100K Thermistor, The Backing Comes With Strong Adhesive.Improted Rubber Silicone, Excellent Heat Source, Evener Heating Across The Whole Surface..
Please Note You'll Need Soldering Gear And Basic Electrical Skills To Do This Upgrade, As Well As A Solid-State Relay (Required) And An Insulation Pad..
Please Size: 300X300mm/ 12 X 12 Inch, Power: Ac 120V 750W.Surface Mount Ntc 100K Thermistor, The Backing Comes With Strong Adhesive.Improted Rubber Silicone, Excellent Heat Source, Evener Heating Across The Whole Surface.Note You'll Need Soldering Gear And Basic Electrical Skills To Do This Upgrade, As Well As A Solid-State Relay (Required) And An Insulation Pad..
The Heating Pad Is Durable And Effective In Heating. When You Feel The Print Bed Is Not Hot Enough, Suggest You To Check The Mos Module, Ssra, The Motherboard Interface. For Example The Issues Maybe Happen For Ssr,Disconnect The Ssr Cable Directly Connect It To The Board, About 3-4 Seconds, Disconnect It Immediately, Touch The Mat, If Feel A Little Hot, Then It Is Still Good. You Need To Replace A New Ssr Relay Then Test It Again.If You Can't Troubleshoot, Contact Us Directly..
Features
- Don't drill the holes by youslfe, heater mat has no holes for the bed screws, which suitable for universal printer without perforated hot bed. Not applicable to some models, such as the Rattlesnake sidewinde X1 and CR10 . Please make sure it matches your printer when you buy. In addition, we will launch a heating pad with perforations, so please look forward to it.
- The heating pad is durable and effective in heating. When you feel the print bed is not hot enough, suggest you to check the mos module, SSRA, the motherboard interface. For example the issues maybe happen for SSR,disconnect the SSR cable directly connect it to the board, about 3-4 seconds, disconnect it immediately, touch the mat, if feel a little hot, then it is still good. You need to replace a new SSR relay then test it again.If you can't troubleshoot, contact us directly.
- Suggest working temperature: -62 200 ( Note: the silicone mat's temperature will heats up quickly, please take anti-scalding measures ! ).X300mm/ 12 X 12 inch, Power: AC 120V 750W.Surface mount NTC 100K thermistor, the backing comes with strong Adhesive.Improted Rubber Silicone, excellent heat source, evener heating across the whole surface.
- Please Size: 300X300mm/ 12 X 12 inch, Power: AC 120V 750W.Surface mount NTC 100K thermistor, the backing comes with strong Adhesive.Improted Rubber Silicone, excellent heat source, evener heating across the whole surface.note you'll need soldering gear and basic electrical skills to do this upgrade, as well as a solid-state relay (required) and an insulation pad.
- Please note you'll need soldering gear and basic electrical skills to do this upgrade, as well as a solid-state relay (required) and an insulation pad.
- See more on Amazon...
Brand: BCZAMD | Manufacturer: Aimengda
See On Amazon #2
FYSETC 3D Printer Silicone Heated Pad, Heating Plate 120x120mm/4.7x4.7inch, 24V 120W Insert a Thermal Fuse, Hotbed Mat with Brand Back Adhesive for Reprap Davinci Mini V2 Monprice Select Mini 2
Asin: B09XM4QGGL
Easy To Mount, No Need Of Ssra. The Two Red Wires Are For Thermistors On The Motherboard, Other Two White Cords Are For Bedout, No +/- Distinction. Its Back Comes With Brand Strong Adhesive..
Wonderful Silicone Heater For Your 3D Printer Heat-Bed Or Other Household Use. Note: The Silicone Bed Will Heat Up Very Quickly, Please Be Careful While Using..
Please Heat Only After It's Mounted Onto The Build Plate (Aluminum Plate Recommended)..
Size: 120X120 Mm/ 4.7X4.7 Inch, Power: 24V 120W. The Ntc Thermistor Is 3950(Beta Value) 100K, Work Well For Davinc Mini V2 3D Printer And Monprice Select Mini 2 3D Printer..
Features
- Imported Arlon silicone rubber substrate, excellent heat source, evener heating across the whole surface. Better heating performance and longer service life, especially in applications which require a long time heating process at extremely high temperatures.
- Size: 120X120 mm/ 4.7X4.7 inch, Power: 24V 120W. The NTC thermistor is 3950(beta value) 100K, Work well for Davinc Mini V2 3D Printer and Monprice Select Mini 2 3D Printer.
- Easy to mount, no need of SSRA. The two red wires are for thermistors on the motherboard, other two white cords are for Bedout, No +/- distinction. Its back comes with Brand strong Adhesive.
- Please heat only after it's mounted onto the build plate (Aluminum plate recommended).
- Wonderful silicone heater for your 3D printer heat-bed or other household use. NOTE: The Silicone bed will heat up very quickly, please be careful while using.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #3
250x250mm Silicone Heater Pad, 110V 450W Silicone Heating Plate Pad Heater with Back Adhesive for VORON2.4 3D Printer Heated Bed
Asin: B0B6LYMMZ9
Rubber Silicone: Silicone Heater Has Built In Rubber Silicone, Which Is An Excellent Heat Source, And The Entire Appearance Is Heated More Evenly..
Thermistor: Flexible Heater Mat Appearance Mount Ntc 100K Thermistor With Adhesive On The Back..
High Temperature Resistance: The Limit Temperature Of The Silicone Heating Plate Is About 200 Degrees (The Temperature Of The Silicone Material Is Resistant To Temperature), And The Heating Plate Is Easily Burned Out If It Exceeds..
Uniform Heat Transfer: Rubber Hot Bed, Low Power And High Temperature, Uniform Heat Transfer, Long Life, High Thermal Efficiency Conversion..
Features
- Applicable Model: Silicone heater mat 250x250mm super size, 450W ultra high power, very suitable for VORON2.4 3D printer.
- Uniform Heat Transfer: Rubber hot bed, low power and high temperature, uniform heat transfer, long life, high thermal efficiency conversion.
- Rubber Silicone: Silicone heater has built in rubber silicone, which is an excellent heat source, and the entire appearance is heated more evenly.
- High Temperature Resistance: The limit temperature of the silicone heating plate is about 200 degrees (the temperature of the silicone material is resistant to temperature), and the heating plate is easily burned out if it exceeds.
- Thermistor: Flexible heater mat appearance mount NTC 100K thermistor with adhesive on the back.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #4
USA Import Material 200X200mm 500W 110V Cube Flexible Silicone Heater Compatible with Voron V2.4 3D Printer Prusa i3 RepRap 3D Printer Heated bed (110V)
Asin: B06XC5Y4XG | Model: h-200110 | PartNumber: h-200110 | Ean: 6003482093625
High Temperateure 3D Printer Heated Bed.
Package: 1Piece 110V Silicone Pad.
Please Heat Only After Being Mounted Onto The Plate. Do Not Heating Without Proper Heat-Sink..
Silicone Heater Pad Is With 1Meter Ntc 100K 3950 Thermistor For Temperature Control And Attached With Two Pieces 1Meter Length Power Wire..
Features
- Size: 200x200mm; Power 110V 500W. Can heat up more than 150 degree easily
- silicone heater pad is With 1meter NTC 100K 3950 thermistor for temperature Control and Attached with two pieces 1meter length power wire.
- high temperateure 3D printer heated bed
- Please heat only after being mounted onto the plate. Do Not heating without proper heat-sink.
- Package: 1piece 110V silicone pad
- See more on Amazon...
Brand: POLISI | Manufacturer: POLISI
See On Amazon
Looking For Something Else?
Search