Adafruit Lipo 4410 Micro Charger for LiPoly Batt with USB Type C Plug
Asin: B08168GWVJ | Model: 4410 | PartNumber: 4410
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.5V Input Via Usb Type C Usb Connector.
100Ma Charge Current, Adjustable To 500Ma By Soldering A Jumper Closed.
For Charging Single Lithium Ion/Lithium Polymer 3.7/4.2V Batteries (Not For Older 3.6/4.1V Cells).
0.1" Breakout Pads With 5V, D- And D+ Data Lines, Gnd And Vbat.
Features
- Comes assembled and ready to rock out of the box
- 0.1 Breakout pads with 5V, D- and D+ data lines, GND and VBAT
- 5V input via USB Type C USB connector
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 2.76 x 0.39 x 2.76 inches | Weight: 0.01 Pounds
See On Amazon Similar To Adafruit Lipo 4410 Micro Charger
#1
Adafruit PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
Asin: B01BMRBTH2 | Model: 2465 | PartNumber: 2465 | Ean: 0600346599086, 0743724368574 | UPC: 600346599086, 743724368574
Boost Converter Chip Extras: Synchronous Conversion, Excellent Efficiency, And 700Khz High-Frequency Operation.
Low Battery Indicator Led Lights Up When The Voltage Dips Below 3.2V, Optimized For Lipo/Liion Battery Usage.
2A Internal Switch Means You Can Get 1000Ma+ From A 3.7V Lipoly/Liion Battery..
Safe For All 5V-Powered Electronics Like Arduino, Raspberry Pi, Or Beagle Bone.
Features
- Perfect power supply for your portable project
- Safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone
- Boost converter chip extras: synchronous conversion, excellent efficiency, and 700KHz high-frequency operation
- 2A internal switch means you can get 1000mA+ from a 3.7V LiPoly/LiIon battery.
- Low battery indicator LED lights up when the voltage dips below 3.2V, optimized for LiPo/LiIon battery usage
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.20 x 4.40 x 1.50 Inches
See On Amazon #2
ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery - 3.7v 500mAh
Asin: B00L0W61VO | Model: 1578 | PartNumber: 1578 | Ean: 0013227695560 | UPC: 013227695560
Capacity Of 500Mah For A Total Of About 1.9 Wh.
Genuine Jst Connector.
Output Ranges From 4.2V When Completely Charged To 3.7V.
Features
- Thin, light and powerful
- Output ranges from 4.2V when completely charged to 3.7V
- Capacity of 500mAh for a total of about 1.9 Wh
- Genuine JST connector
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.19 x 1.14 x 1.42 inches | Weight: 0.00 pounds
See On Amazon #3
Adafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]
Asin: B00OKJFEQ2 | Model: 100463 | PartNumber: 100463 | Ean: 0748347523508, 0701980281822 | UPC: 748347523508, 701980281822
For Charging Single Lithium Ion/Lithium Polymer 3.7/4.2V Batteries (Not For Older 3.6/4.1V Cells).
Free 2-Pin Jst Cable Included!.
100Ma Charge Current, Adjustable To 500Ma By Soldering A Jumper Closed.
5V Input Via Pcb-Style Usb Connector.
Features
- Assembled and tested
- 5V input via PCB-style USB connector
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
- Free 2-pin JST cable included!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 3.54 x 2.36 inches | Weight: 0.00 pounds
See On Amazon #4
Adafruit 3885 Stemma Speaker - Plug and Play Audio Amplifier
Asin: B082MNXJG5 | Model: 3885 | PartNumber: 3885
Class D Audio Amplifier.
Adjustable Volume.
Good Sound Quality For Music, Tones, Or Speech.
1W 8Ohm Speaker.
Features
- Easy to connect - Only need ground, 3 or 5V Power and an audio signal
- 1W 8Ohm speaker
- Class D Audio Amplifier
- Good sound quality for music, tones, or speech
- Adjustable volume
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.02 Pounds
See On Amazon #5
1200mAh 3.7V Li-Poly Battery with JST-PH cable
Asin: B00J2QET64 | Model: 258 | PartNumber: 258 | Ean: 0013039221537 | UPC: 013039221537
Features
- This battery is for general use. Please make sure this battery will fit your application by measuring against the dimensions below
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 2.44 x 1.34 x 0.20 inches | Weight: 0.00 pounds
See On Amazon #6
ADAFRUIT INDUSTRIES 1944 POWERBOOST 500 CHARGER LIPO CHARGER
Asin: B00PY2YTVU | Model: 1944 | PartNumber: 1944 | Ean: 0748347526011, 0743724369342 | UPC: 743724369342, 748347526011
Low Battery Indicator Led Lights Up Red When The Voltage Dips Below 3.2V, Optimized For Lipo/Liion Battery Usage.
2A Internal Switch (~2.5A Peak Limiting) Means You Can Get 500Ma+ From A 3.7V Lipoly/Liion Battery. We Had No Problem Drawing 1000Ma, Just Make Sure Your Battery Can Handle It!.
Perfect Power Supply For Your Portable Project Or Device.
Features
- Low battery indicator LED lights up red when the voltage dips below 3.2V, optimized for LiPo/LiIon battery usage
- Perfect power supply for your portable project or device
- Low battery indicator LED lights up red when the voltage dips below 3.2V, optimized for LiPo/LiIon battery usage
- 2A internal switch (~2.5A peak limiting) means you can get 500mA+ from a 3.7V LiPoly/LiIon battery. We had no problem drawing 1000mA, just make sure your battery can handle it!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit Industries
Dimensions: 0.39 x 1.38 x 0.87 Inches | Weight: 0.02 Pounds
See On Amazon #7
Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2
Asin: B00E4WLX1K | Model: 259 | PartNumber: 259
Weight: 5.7G ( 0.2Oz).
0.1 Inch.
Chip Supports A 10K Ntc Thermistor Which We Have Stuffed As A Plain 10K. For People Who Require Temperature Monitors (Using High Charge Rates), Remove The 10K And Solder In The Thermistor In Its Place.
For Charging Single Lithium Ion/Lithium Polymer.
Features
- Comes assembled and tested with a free bonus jst cable
- For charging single lithium ion/lithium polymer
- Weight: 5.7G ( 0.2Oz)
- Chip supports a 10K ntc thermistor which we have stuffed as a plain 10K. For people who require temperature monitors (using high charge rates), remove the 10K and solder in the thermistor in its place
- 0.1 inch
- See more on Amazon...
First Available: 03/12/2017
Brand: Adafruit | Manufacturer: Adafruit Industries
Weight: 0.04 pounds
See On Amazon #8
Universal USB/DC/Solar Lithium Ion/Polymer Charger - bq24074 Adafruit 4755
Asin: B09K4V1Q15
Up To 10V Input Voltage, 28V Protected.
No Stabilization Capacitor Needed (Although You Can Add One If You Like!).
Power Good Led Lets You Know That The Charger Is Working.
Up To 1.5A Charge Rate.
Features
- USB Type C port for modern computers and chargers
- Up to 1.5A charge rate
- Up to 10V input voltage, 28V protected
- Power Good LED lets you know that the charger is working
- No stabilization capacitor needed (although you can add one if you like!)
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #9
Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly Charger - v1
Asin: B00SK8J94M | Model: FBA_ADA1905 | PartNumber: FBA_ADA1905 | Ean: 0711978441947 | UPC: 711978441947
For Charging Single Adafruit Lithium Ion/Lithium Polymer 3.7/4.2V Batteries (Not For Older 3.6/4.1V Cells).
Mini-Usb Port.
Free Bonus Jst Cable.
Two Leds - One Red (Charging) And One Green (Fully Charged).
Features
- Small and easy to use - you can keep it on your desk or mount it easily into any project
- Two LEDs - one red (Charging) and one green (Fully charged)
- For charging single Adafruit Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- Free bonus JST cable
- Mini-USB port
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #10
Adafruit PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+ [ADA1944]
Asin: B00XW2MEW0 | Model: 8541585591 | PartNumber: 8541585591 | Ean: 0711978444191 | UPC: 711978444191
Boost Converter Chip Has Really Nice Extras: Synchronous Conversion, Excellent Efficiency, And 700Khz High-Frequency Operation.
Low Battery Indicator Led Lights Up Red When The Voltage Dips Below 3.2V, Optimized For Lipo/Liion Battery Usage.
2A Internal Switch (~2.5A Peak Limiting) Means You Can Get 500Ma+ From A 3.7V Lipoly/Liion Battery..
The 5.2V Is Safe For All 5V-Powered Electronics Like Arduino, Raspberry Pi, Or Beagle Bone.
Features
- Perfect power supply for your portable project
- The 5.2V is safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone
- Boost converter chip has really nice extras: synchronous conversion, excellent efficiency, and 700KHz high-frequency operation
- 2A internal switch (~2.5A peak limiting) means you can get 500mA+ from a 3.7V LiPoly/LiIon battery.
- Low battery indicator LED lights up red when the voltage dips below 3.2V, optimized for LiPo/LiIon battery usage
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #11
Adafruit Micro-USB LiPo Charger
Asin: B00MJ0HOKS | Model: 1904 | PartNumber: 1904 | Ean: 0711978441930, 0748347524017 | UPC: 748347524017, 711978441930
Comes Assembled And Tested With A Jst Cable, 5V Input Via Micro-B Usb Connector, For Charging Single Lithium Ion/Lithium Polymer 3.7/4.2V Batteries (Not For Older 3.6/4.1V Cells), 100Ma Charge Current, Adjustable To 500Ma By Soldering A Jumper Closed.
Dimensions: 21Mm X 19Mm X 2Mm / 0.8" X 0.75" X 0.08".
For Use With Adafruit Lipoly/Liion Batteries Only. Other Batteries May Have Different Voltage, Chemistry, Polarity Or Pinout. Lipo/Lipoly/Liion Batteries Not Included.
Features
- Battery not included
- For use with Adafruit LiPoly/LiIon batteries only. Other batteries may have different voltage, chemistry, polarity or pinout. Lipo/Lipoly/LiIon Batteries not included
- Comes assembled and tested with a JST cable, 5V input via Micro-B USB connector, For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells), 100mA charge current, adjustable to 500mA by soldering a jumper closed
- Dimensions: 21mm x 19mm x 2mm / 0.8 x 0.75 x 0.08
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.20 x 4.72 x 2.76 inches | Weight: 0.01 Pounds
See On Amazon #12
Adafruit Lithium Ion Polymer Battery - 3.7v 150mAh
Asin: B011OA5UTU | Model: 1317 | PartNumber: 1317 | Ean: 3700386513176
The Included Protection Circuitry Keeps The Battery Voltage From Going Too High (Over-Charging) Or Low (Over-Use) Which Means That The Battery Will Cut-Out When Completely Dead At 3.0V. It Will Also Protect Against Output Shorts..
The Batteries Come Pre-Attached With A Genuine 2-Pin Jst-Ph Connector As Shown And Include The Necessary Protection Circuitry..
Features
- This battery has a capacity of 150mAh for a total of about 0.6 Wh.
- The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry.
- The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts.
- See more on Amazon...
Manufacturer: ADAFRUIT
Dimensions: 1.10 x 5.20 x 3.90 inches
See On Amazon #13
Adafruit Flex Cable for Raspberry Pi Camera - 2 Meters [ADA2144]
Asin: B00XW2NCKS | Model: NA | PartNumber: NA | Ean: 7107564505583, 0711978444627, 0748347526813 | UPC: 711978444627, 748347526813
Raspberry Pi & Camera Board Not Included.
This Cable Is 2 Meters Long.
Features
- Swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a longer size.
- This cable is 2 meters long
- Raspberry Pi & Camera Board NOT included
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.97 x 7.87 x 3.94 inches | Weight: 0.03 pounds
See On Amazon #14
Adafruit Black Shortening microSD Adapter for Raspberry Pi & Macbooks [ADA1763]
Asin: B00OKJFTNA | Model: 100415 | PartNumber: 100415 | Ean: 0701980281341 | UPC: 701980281341
Deep Groove For Easy Removal.
Microsd Card And Raspberry Pi Not Included.
Works In Any Raspberry Pi Case And In Our Macbook Pro. Protrudes From Edge Of Raspberry Pi 8Mm When Installed..
Features
- Shorter than traditional adapters -- Only 9mm
- Works in any Raspberry Pi case and in our Macbook pro. Protrudes from edge of Raspberry Pi 8mm when installed.
- Deep groove for easy removal
- MicroSD card and Raspberry Pi not included
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.10 x 1.00 x 0.80 Inches | Weight: 0.05 Pounds
See On Amazon #15
Adafruit USB/DC/Solar Lithium Ion/Polymer Charger [ADA390]
Asin: B00OKCSK88 | Model: 100503 | PartNumber: 100503 | Ean: 0701851951595 | UPC: 701851951595
For Use With Adafruit Lipoly/Liion Batteries Only.
Always Draw The Most Current Possible From A Solar Cell - Up To The Max Charge Rate.
Near-Identical Performance To Mppts Without The Additional Cost Of A Buck-Converter.
Features
- Specialized USB/Solar Lithium Ion Polymer Battery charger
- Near-identical performance to MPPTs without the additional cost of a buck-converter
- For use with Adafruit Lipoly/LiIon batteries only
- Always draw the most current possible from a solar cell - up to the max charge rate
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.08 x 1.60 x 1.30 inches | Weight: 50.00 Grams
See On Amazon #16
Adafruit USB Power Only Cable with Switch - A/MicroB [ADA2379]
Asin: B01BMRDDQW | Model: 2379 | PartNumber: 2379 | Ean: 0603149690660 | UPC: 603149690660
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #17
Adafruit (PID 3422 Arcade Bonnet for Raspberry Pi with JST Connectors - Mini Kit
Asin: B06XGWH6PG | Ean: 0717520031130 | UPC: 717520031130
Has A 3W Digital Speaker Output That Can Drive 4-8 Ohm Speakers.
Does Not Include Any Extras Like Switches, Joystick, Speaker, Etc. You Can Add Them As Needed..
Switches Are All Managed With An I2c Gpio Converter With Interrupt Out.
It Has Jst Sockets So You Can Plug In Six Arcade Buttons Easily.
Features
- Same size as a Pi Zero, but you can also use it with Pi 2, 3, B+ or any 2x20 connector Pi
- It has JST sockets so you can plug in six arcade buttons easily
- Has a 3W digital speaker output that can drive 4-8 ohm speakers
- Switches are all managed with an i2c GPIO converter with interrupt out
- Does not include any extras like switches, joystick, speaker, etc. You can add them as needed.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon
Looking For Something Else?
Search