iSunergy 30A PWM Solar Charge Controller 12V / 24V / 36V / 48V Auto Solar Panel Battery Regulator with LCD Display USB Ports for Solar Home System
Asin: B081GS41VP | Ean: 0732376582056, 0732376582599 | UPC: 732376582599, 732376582056
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Support Lead-Acid Battery And Lithium Battery Charging And Discharging. Solar Controllers Can Be Work From The Solar Panel When The Voltage Of Lithium Battery Is 0V..
Mulitple Protection: Battery Over Discharge, Overvoltage, Low Voltage Protection, Load Overcurrent, Short-Circuit Protection, Reverse Discharge Protection, Reverse Connect Protection..
Lcd Display Screen With Backlight Function, Displays Battery Power, Voltage And Current, Charge And Discharge Status, Daily Power Generation And Electricity Statistics..
Intelligent 3-Tage Pwm Charging Mode: Bulk Charge, Absorption Charge, Float Charge..
Features
- 12V/24V full automatic identification. Features a 5V/2A USB output that can be used to charge mobile phones, tablets, speakers, etc.
- Intelligent 3-tage PWM charging mode: bulk charge, absorption charge, float charge.
- Support Lead-acid battery and Lithium battery charging and discharging. Solar controllers can be work from the solar panel when the voltage of lithium battery is 0V.
- LCD display screen with backlight function, displays battery power, voltage and current, charge and discharge status, daily power generation and electricity statistics.
- Mulitple Protection: Battery over discharge, overvoltage, low voltage protection, Load overcurrent, short-circuit protection, reverse discharge protection, reverse connect protection.
- See more on Amazon...
Brand: iSunergy | Manufacturer: iSunergy
Dimensions: 1.97 x 7.36 x 3.86 inches
See On Amazon Similar To iSunergy 30A PWM Solar Charge
#1
Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed, Gel, and Flooded Batteries, Wanderer Li 30A
Asin: B07G1PL1B9 | Model: Charge Controller | PartNumber: Charge Controller | Ean: 0816360027676 | UPC: 816360027676
【Compact In Size】Which Makes It Easy To Install Virtually Anywhere..
【Wanderer10a|30A Installation Notes】 The Default Starting Position Of The Wanderer Controller Terminal Hatches Are Closed (In The Up Position) That Could Mistakenly Look Like An Open Wire Hatch. Make Sure To First Lower Each Terminal Hatch By Screwing The Terminals Counterclockwise (Ccw) To Expose The Wire Terminal Hatch To The Open Position. Then Secure Each Cable By Rotating The Screws Clockwise (Cw) To The Closed Position..
【Remote Monitoring】 The Rs232 Communication Port Allows The Renogy Rover Charge Controller To Communicate With The Dc Home App And Renogy One M1 Via The Renogy Bt-1 Bluetooth Module (Highly Recommend To Add-On ). This Will Enable You To Monitor The Status And Productivity Of Your Panels On The Go..
【Multiple Battery Adaptation】 Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
【Smart 4-Stage Pwm Charging】Smart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- Optimized for 12V Batteries Compatible with 12V battery banks on the market, including lithium batteries. The LED indicators allow you to set battery types and check the charging staus with ease.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Compact in size Which makes it easy to install virtually anywhere.
- Multiple battery adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Wanderer10A|30A Installation Notes The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch. Make sure to FIRST lower each terminal hatch by screwing the terminals counterclockwise (CCW) to expose the wire terminal hatch to the open position. THEN secure each cable by rotating the screws clockwise (CW) to the closed position.
- Remote Monitoring The RS232 communication port allows the Renogy Rover charge controller to communicate with the DC Home app and Renogy ONE M1 via the Renogy BT-1 Bluetooth module (highly recommend to add-on ). This will enable you to monitor the status and productivity of your panels on the go.
- See more on Amazon...
First Available: 02/28/2021
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.76 x 6.45 x 4.31 inches | Weight: 0.30 pounds
Warranty: 1-year material and workmanship warranty
See On Amazon #2
[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (30a)
Asin: B08L8TBCK6 | Ean: 0713484981214 | UPC: 713484981214
Please Note: The Charge Regulator Is Only Suitable For Lead-Acid Batteries: Open, Agm, Gel. Do Not Support Any Other Batteries. The Solar Controller Will Turn Off Automatically To Protect The Lifespan Of Your Battery If The Voltage Of The Battery Drop Below 8V..
Warranty: 12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email, We Will Arrange A Refund Or A Replacement..
Lcd Display: Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently And Can Use This Controller In A Different Place Like Home, Industrial, Commercial, Etc..
Safe To Use: Equipped With Overcurrent Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage, And Overcharge Protection, And Have Fully 3-Stage Pwm Charge Management. This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
Features
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
Dimensions: 1.30 x 5.28 x 2.80 inches
See On Amazon #3
Voltset 30W Solar Panel Battery Trickle Charger Maintainer + Upgrade 10A MPPT Charge Controller + Adjustable Mount Bracket, 12V Waterproof Solar Panel Trickle Charging Kit for Car RV Boat Motorcycle
Asin: B0C2H7BVY6 | Model: VS-30W | PartNumber: VS-30W
👍【Great Monocrystalline Siclion】The 30 Watt Solar Panel Adopts A+ Monocrystalline Silicon With An Effective Conversion Rate Of Up To 30%. In The Case Of Sufficient Sunlight, High Efficiency, And High Conversion Rate Can Be Achieved, Which Greatly Improves The Charging Efficiency And Speed Than Other Amorphous Materials.And Lifespan Up To 25 Years..
💗【12-Month Warranty】Voltset Provides 24-Hours Professional Customer Service And 12-Month Warranty. If You Have Any Questions, Please Contact Us. We Appreciate To Improve From Your Suggestion. Package Includes 1*30W Solar Panel, 1*10A Mppt Charger Controller, 1*Mounting Bracket, 1*Alligator Clip, 1*O-Ring, And 1 Set Of Mounting Pieces..
🚗【Widely Application】Solar Battery Chargers Are Convenient To Use For Cars, Boats, Trucks, Marine, Motorcycles, Tractors, Atvs, Dump Trailers, Lawnmowers, Snowmobiles, Rvs, Campers, Door Openers, Pumps, Security Cameras, Electric Fences. Compatible With 12V Rechargeable Batteries Like Lifepo₄, Lithium Ion, Agm, Sla, Gel, Efb, Mf, Etc. Plug & Play Sae Connector For Easy Use..
👍【Led Indicators Monitoring】With 3 Clear Led Indicators To Help You Visualize The Working Status And Battery Condition Well At All Times. Red Light And Blue Light (Charging) - Blue Light (In Sunlight) - Green Light (Full Charge) - No Light (Short Circuit). When Solar Power Fails, You Can Check The Connection In Time. The Solar Charge Maintainer Is Only Powered By Solar Panels And Does Not Consume Battery Power..
🌊【Sturdy & Waterproof】Solar Battery Charger Is Made Of Tempered Solar Glass With A Corrosion-Resistant Aluminum Alloy Mounting Frame. The Tempered Glass Is High-Strength And Impact-Resistant, Well-Built, And Has Worked For Years. Ip65 Waterproof And Rust-Proof Solar Battery Charger Can Withstand All Severe Weather Conditions Such As Strong Winds, Thunderstorms, Blizzards, And Hail, And Can Withstand Wind Pressures Up To 2400Pa And Snow Loads Up To 5400Pa..
👍【360° Adjustable & 4 Corners】The Solar Trickle Charger Is Equipped With A 360° Adjustable Mounting Bracket, That Can Be Used To Position The Panel At Any Angle, And Easily Mount The Stand On The Ground, Wall, And Roof, Ensuring Maximum Sunlight Absorption And Power Generation. The 4 Corners Are Also Equipped With A Fall Jacket To Better Protect The Glass Panel. During Installation, The Safety Is Protected From Scratches..
Features
- Upgraded MPPT Controller Intelligent MPPT charge controller with maintenance generates more than 20%-30% more power than other solar charge controllers. 10A MPPT charge controller 100% waterproof, can be completely submerged in water. Fully protect the battery and prevent it from over-charge, over-discharge, over-voltage, over-current, over-load, short circuit, reverse polarity, and over-temperature. The 10A controller is suitable for maximum power of solar panels not exceed 130W.
- 360 Adjustable & 4 Corners The solar trickle charger is equipped with a 360 adjustable mounting bracket, that can be used to position the panel at any angle, and easily mount the stand on the ground, wall, and roof, ensuring maximum sunlight absorption and power generation. The 4 corners are also equipped with a fall jacket to better protect the glass panel. During installation, the safety is protected from scratches.
- Great Monocrystalline Siclion The 30 watt solar panel adopts A+ monocrystalline silicon with an effective conversion rate of up to 30%. In the case of sufficient sunlight, high efficiency, and high conversion rate can be achieved, which greatly improves the charging efficiency and speed than other amorphous materials.And lifespan up to 25 years.
- Sturdy & Waterproof Solar battery charger is made of tempered solar glass with a corrosion-resistant aluminum alloy mounting frame. The tempered glass is high-strength and impact-resistant, well-built, and has worked for years. IP65 waterproof and rust-proof solar battery charger can withstand all severe weather conditions such as strong winds, thunderstorms, blizzards, and hail, and can withstand wind pressures up to 2400Pa and snow loads up to 5400Pa.
- Widely Application Solar battery chargers are convenient to use for cars, boats, trucks, marine, motorcycles, tractors, ATVs, dump trailers, lawnmowers, snowmobiles, RVs, campers, door openers, pumps, security cameras, electric fences. Compatible with 12V rechargeable batteries like LiFePO , Lithium Ion, AGM, SLA, GEL, EFB, MF, etc. Plug & play SAE connector for easy use.
- LED Indicators Monitoring With 3 clear LED indicators to help you visualize the working status and battery condition well at all times. Red light and Blue light (Charging) - Blue light (In Sunlight) - Green Light (Full Charge) - No Light (Short Circuit). When solar power fails, you can check the connection in time. The solar charge maintainer is only powered by solar panels and does not consume battery power.
- 12-Month Warranty VOLTSET provides 24-hours professional customer service and 12-month warranty. If you have any questions, please contact us. We appreciate to improve from your suggestion. Package includes 1*30W Solar Panel, 1*10A MPPT Charger Controller, 1*Mounting Bracket, 1*Alligator Clip, 1*O-ring, and 1 set of Mounting Pieces.
- See more on Amazon...
Brand: Voltset | Manufacturer: Voltset
Dimensions: 2.00 x 21.00 x 15.00 Inches | Weight: 6.00 Pounds
See On Amazon #4
Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Compatible with Sealed, Gel, Flooded and Lithium Batteries, Adventurer 30A,black
Asin: B07BBKFTNV | Model: Adventurer 30A Li 12V/24V | PartNumber: Adventurer 30A Li 12V/24V | Ean: 0816360026396 | UPC: 816360026396
【Flush Mount Design】Designed To Cleanly Flush Mount On Walls, Providing A Sleek, Integrated Look. An Included Surface Mount Attachment Allows For Versatility In Mounting..
【Multiple Battery Adaptation】 Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
【Real-Time Monitoring】The Rs232 Port Can Work With The Bt-1 Bluetooth Module To Deliver Real-Time Energy Data Across The Dc Home Smart Phone App & Renogy One M1.
【Negative Ground】The Adventurer Is A Negative Ground Controller. This Ensure Compatibility With Any Negative Ground System, Which Is The Standard And Most Conventional Way Of Grounding. Any Negative Connection On The Solar Module, Battery And Load Can Be Safely Earth Grounded As Required..
【Smart 4-Stage Pwm Charging】Smart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for non-lithium batteries). The LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Flush Mount Design Designed to cleanly flush mount on walls, providing a sleek, integrated look. An included Surface Mount Attachment allows for versatility in mounting.
- Negative Ground The Adventurer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Any negative connection on the solar module, battery and load can be safely earth grounded as required.
- Multiple Battery Adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Real-time Monitoring The RS232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1
- See more on Amazon...
First Available: 02/22/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.90 x 6.56 x 4.50 inches | Weight: 0.60 pounds
Warranty: NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.
See On Amazon #5
Renogy Rover 30A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery, Rover 30A,Black
Asin: B07DNVW37B | Model: fit for Gel Sealed Flooded and Lithium | PartNumber: fit for Gel Sealed Flooded and Lithium | Ean: 0810009715825, 0816360027492 | UPC: 810009715825, 816360027492
【Full System Protection】Meant To Safeguard Your System, The Self-Diagnostic Capability Can Assess And Protect Against Reverse Polarity, Battery Overcharging, Battery Over-Discharging, Overload, Short-Circuiting, And Reverse Current..
【Diverse Load Control】 Connect Dc Appliances Directly To The Optional Load Terminals And Monitor Consumption Or Set Up Timer Controls Directly From The Controller.
【Remote Monitoring】 The Rs232 Communication Port Allows The Renogy Rover Charge Controller To Communicate With The Dc Home App And Renogy One M1 Via The Renogy Bt-1 Bluetooth Module (Highly Recommend To Add-On ). This Will Enable You To Monitor The Status And Productivity Of Your Panels On The Go..
【4-Stage Safely Charging】Features 4-Stage Charging (Bulk, Absorption, Float, And Equalization) Of Lead Acid Batteries And 2-Stage Charging (Bulk And Absorption) For Lithiuim Batteries As Well As Lithium Reactivation.
【12V/24V Automatically Detect】Automatically Detects 12V Or 24V Dc System Voltages (For Non-Lithium Battery Types), And The Lcd Screen And Multiple Led Indicators Display The Solar Charging And Battery Operation Information, Customizable Parameters, And Error Codes.
Features
- Innovative MPPT Design Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for Non-Lithium battery types), and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes
- Full System Protection Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current.
- 4-Stage Safely Charging Features 4-stage charging (Bulk, Absorption, Float, and Equalization) of Lead Acid Batteries and 2-stage charging (Bulk and Absorption) for Lithiuim batteries as well as Lithium Reactivation
- Diverse Load Control Connect DC appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller
- Remote Monitoring The RS232 communication port allows the Renogy Rover charge controller to communicate with the DC Home app and Renogy ONE M1 via the Renogy BT-1 Bluetooth module (highly recommend to add-on ). This will enable you to monitor the status and productivity of your panels on the go.
- See more on Amazon...
First Available: 12/24/2020
Brand: Renogy | Manufacturer: Renogy
Dimensions: 2.85 x 9.37 x 6.81 inches | Weight: 4.40 pounds
Warranty: 2-year material and workmanship warranty
See On Amazon #6
[ ]ECO-WORTHY Solar Charge Controller 30A Solar Panel Custom Battery Regulator, Dual USB Port Auto 12V/24V PWM for FLD/LiFePO4/SLD/GEL
Asin: B0CYCD52D3 | Ean: 0810127132955 | UPC: 810127132955
[High-Precision Measurement] Upgraded Components, Capable Of Accurately Measuring Current And Voltage With An Error Of Less Than 1%. Equipped With A Clear Lcd Display For Accurate Real-Time Data; New Upgrade Three Buttons For Convenient Mode Switching And Simple Parameter Settings..
[Widely Used] Durable Metal Backplate For Effective Heat Dissipation And Protection Of Internal Components. Ideal For Rv Camping, Boating, And More Outdoor Applications..
[Warranty] 1 Year With 24/7 Tech Support, If You Have Any Problems Or Questions About The Product, Please Feel Free To Contact Us Through Amazon Or Call Eco-Worhty Hotline, Eco-Worthy Team Will Actively Provide You With Professional Solutions..
[Intelligent 3-Level Pwm Charging] Full Three-Level Pwm Intelligent Charging Management (Bulk, Absorber, Float), And Multiple Intelligent Protections Against Reverse, Short Circuit, Overcurrent, Low/High Voltage, Overheating. Improving System Efficiency And Performance, Extending Battery Lifespan..
[Compatible With All Batteries] Compatible With All 12V&24V Batteries, Supports Custom Battery Parameters (Cus Mode), And Allows Easy Selection Of Preset Battery Types: Lfp, Fld, Sld, Gel..
Features
- [Newly Upgraded] Upgraded 30A PWM Solar Charge Controller with improved internal components. Automatically detects 12V/24V DC system voltage, maximum discharge current of 30A, supporting a maximum system power of 12V 750W; 24V 1500W. Built-in dual USB outputs 5V/2A for charging your devices on-the-go.
- [Compatible with All Batteries] Compatible with all 12V&24V batteries, supports custom battery parameters (CUS mode), and allows easy selection of preset battery types: LFP, FLD, SLD, GEL.
- [High-Precision Measurement] Upgraded components, capable of accurately measuring current and voltage with an error of less than 1%. Equipped with a clear LCD display for accurate real-time data; New upgrade three buttons for convenient mode switching and simple parameter settings.
- [Intelligent 3-Level PWM Charging] Full three-level PWM intelligent charging management (bulk, absorber, float), and multiple intelligent protections against reverse, short circuit, overcurrent, low/high voltage, overheating. Improving system efficiency and performance, extending battery lifespan.
- [Widely Used] Durable metal backplate for effective heat dissipation and protection of internal components. Ideal for RV camping, boating, and more outdoor applications.
- [Warranty] 1 year with 24/7 tech support, if you have any problems or questions about the product, please feel free to contact us through Amazon or call ECO-WORHTY hotline, ECO-WORTHY team will actively provide you with professional solutions.
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
Dimensions: 1.18 x 5.91 x 3.74 inches
See On Amazon #7
ECO-WORTHY 30A Solar Charger Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Auto 12/24V PWM Positive Ground
Asin: B08JBLMC33
【Battery Type】: The Charge Regulator Is Suitable For Lead-Acid Batteries, Gel Batteries And Lithium Phosphate Batteries. For Protecting The Lifespan Of Your Battery, Once The Voltage Of The Battery Drop Below 8V, The Solar Controller Will Turn Off Automatically.
【Easy To Install And Operate】: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! The Disassembly Sequence Is Contrary To The Wiring Order.Dual Mosfet Reverse Current Protection, Low Heat Production. ( Note: The Charge Controller Will Heat Up When It Is Running. Please Be Careful To Install The Charger Controller On A Flat, Well-Ventilated Place).
【Lcd Display】: Comes With A Display That Can Clearly Indicate The Status And Data, It Can Be Conveniently Switched Modes And Parameter Configuration, Suitable For Home, Industrial, Commercial Etc..
【Multiple Protection Functions】: Eco-Worthy Solar Controller Has Short-Circuit Protection, Open-Circuit Protection,Reverse Protection, Over-Load Protection. Fully 3-Stage Pwm Charge Management, Improve System Efficiency And Prolong The Life Span Of The Battery.
Features
- 30A Solar Charge controller : the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing
- Multiple Protection Functions : ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery
- Battery Type : The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically
- LCD Display : Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
- Easy to Install and Operate : The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place)
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
See On Amazon #8
EEEkit 30A Solar Charge Controller, Solar Panel Charger Controller 12V/24V, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter
Asin: B07R8TRJ8C | Model: H026100-E008135338FBA | PartNumber: H026100-E008135338FBA
Intelligent Design: Build-In Industrial Microcontroller For Automatical Management, Memorizing Various Parameters Set By The User And The Data Won't Be Lost When The Battery Runs Out. The Solar Controller Will Turn Off Automatically Once The Voltage Is Too Low..
Easy To Use: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! You Can Change The Settings By The Simple One-Button Operation. Don't Worry Of The Unsatisfied Product You Received. We Offer A 30-Days Money-Back Guarantee And 12-Month Warranty For Quality-Related Issues..
Functional Lcd Display: Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, Suitable For Home, Industrial, Commercial, Etc..
Reliable Protection: Eeekit Solar Charge Regulator Provides Over-Current Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage And Overcharge Protection, A Reliable Protector For Your Devices..
Features
- WIDE COMPATIBILITY: The solar charger controller with 30A rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, AGM, GEL. Dual USB 5V/3A output ports support mobile phones, tablet PCs or other devices that require 5V voltage. Please read the manual carefully.
- RELIABLE PROTECTION: EEEKit solar charge regulator provides over-current protection, short-circuit protection, inverse connection protection, low voltage and overcharge protection, a reliable protector for your devices.
- INTELLIGENT DESIGN: Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. The solar controller will turn off automatically once the voltage is too low.
- FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc.
- EASY TO USE: The charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Don't worry of the unsatisfied product you received. We offer a 30-days money-back guarantee and 12-month warranty for quality-related issues.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEKit
Dimensions: 2.50 x 7.00 x 13.50 Inches
See On Amazon #9
30A Solar Charge Controller 12V 24V, Bateria Power PWM Intelligent Plug and Play Portable Solar Regulator, LCD Display for Solar Panels Compatible with LFP AGM SLD FLA, for RV, Off-Gird (SunRock 30E)
Asin: B0CSJV161S
【Mini & Portable With Lcd Display & Led Indicate Light】The Controller Is Equipped With An Lcd Screen And Led Indicator Light, Which Is Convenient For You To Monitor The Working Condition Of The Solar Panel And Battery. In Addition, This Controller Is Compact And Convenient In Appearance. Compared With Other Controllers, It Saves 30% Of The Space. It Is Also Very Convenient To Carry And Connect When Used Outdoors..
【Dsign For 12V And 24V Battery】Compatible With Various 12V And 24V Batteries, Such As Sld, Fld, Gel, Agm, Sla, Lifepo4, Ternary Lithium Battery, And Lto Battery. Max Solar Input Power: 450W For 12V Battery; 900W For 24V Battery..
【Excellent Waterproof Performance】This Controller Has Good Waterproof Performance, So Even If You Use It Outdoors, You Don't Have To Worry About Inclement Weather Making It Unusable. (Reminder: To Prolong The Service Life, We Do Not Recommend Soaking The Controller In Water.).
【High Security】The Controller Has A Built-In Protection System And Intelligent 3-Stage Charging (Equalize, Float, Boost), Which Means That The Solar Energy Can Be Used To The Maximum Extent, And It Can Also Fully Protect Your Battery (Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection), It Is Safer To Use..
【Plug & Play】Anderson Connector Quickly Connects Or Disconnects, Plug And Play, Convenient And Practical. No Additional Installation Is Required, Making Usage Simple. The Portable 30A Pwm Controller Can Be Adapted To All Your Portable Solar Panels And Is A Wonderful Choice For Rv Travel..
Features
- Notes to buyers Designed for 12V and 24V batteries, please don't connect to higher voltage batteries. The PV Voc needs to be higher than the battery voltage, the minimum is 15V, and the maximum should not exceed 25Voc for 12V BAt; and not exceed 55Voc for 24V BAt. Connection sequence: first connect the battery, then connect the solar panel.
- Plug & Play Anderson connector quickly connects or disconnects, plug and play, convenient and practical. No additional installation is required, making usage simple. The portable 30A PWM controller can be adapted to all your portable solar panels and is a wonderful choice for RV travel.
- Mini & Portable with LCD Display & LED Indicate Light The controller is equipped with an LCD Screen and LED indicator light, which is convenient for you to monitor the working condition of the solar panel and battery. In addition, this controller is compact and convenient in appearance. Compared with other controllers, it saves 30% of the space. It is also very convenient to carry and connect when used outdoors.
- High Security The controller has a built-in protection system and intelligent 3-stage charging (Equalize, Float, Boost), which means that the solar energy can be used to the maximum extent, and it can also fully protect your battery (Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection), it is safer to use.
- Dsign for 12V and 24V Battery Compatible with various 12v and 24v batteries, such as SLD, FLD, GEL, AGM, SLA, LiFePO4, ternary lithium battery, and LTO battery. Max solar input power: 450W for 12V battery; 900W for 24V battery.
- Excellent Waterproof Performance This controller has good waterproof performance, so even if you use it outdoors, you don't have to worry about inclement weather making it unusable. (Reminder: To prolong the service life, we do not recommend soaking the controller in water.)
- See more on Amazon...
Brand: Bateria Power | Manufacturer: Bateria Power
See On Amazon #10
SOLPERK 8A 12V Waterproof Solar Charge Controller, Upgraded Solar Panel Controller, PWM Solar Battery Regulator with LED Display for 12V Batteries
Asin: B0CLRJWZ87 | Model: 8A Controller | PartNumber: 8A Controller | Ean: 3338138781520
[Led Display] This Controller Has Two Led Lights That Show You The Charging Status. You Can Easily See If The Battery Is Charging Or Fully Charged..
[Warranty And Support] We Offer A One-Year Warranty And Lifetime Technical Support For This Controller. We Also Have A 24/7 Customer Service Team That Can Answer Your Questions Within A Day..
[12V 8A Controller] This Controller Is Designed For 12V Solar Panels With A Maximum Current Of 8A, And 12V Rechargeable Batteries. It Works With 12V Batteries Such As Lifepo₄, Agm, Gel, And More..
[Easy To Use] This Controller Has A Handy Sae Connector That Plugs In Easily. Just Make Sure To Connect The Red Wire To The Positive Terminal And The Black Wire To The Negative Terminal Of Your Battery And Solar Panel..
[Zero Consumption From Battery] This Controller Uses Solar Power To Charge Your Battery, And It Doesn’T Drain Your Battery At Night. It Has Zero Power Consumption When There Is No Sunlight..
[Safe Controller] This Controller Has Six Safety Features To Protect Your Battery And Prevent Any Accidents. It Can Prevent Reverse Current, Overheating, Short Circuit, Overcharging, Over-Voltage, And Reverse Polarity. You Can Charge Your Battery With Peace Of Mind..
Features
- [Waterproof Controller] This controller is built to last in any weather. It has a waterproof seal that keeps it safe from rain, snow, and dust. It s perfect for outdoor use.
- [Safe Controller] This controller has six safety features to protect your battery and prevent any accidents. It can prevent reverse current, overheating, short circuit, overcharging, over-voltage, and reverse polarity. You can charge your battery with peace of mind.
- [LED Display] This controller has two LED lights that show you the charging status. You can easily see if the battery is charging or fully charged.
- [Zero Consumption from Battery] This controller uses solar power to charge your battery, and it doesn t drain your battery at night. It has zero power consumption when there is no sunlight.
- [12V 8A Controller] This controller is designed for 12V solar panels with a maximum current of 8A, and 12V rechargeable batteries. It works with 12V batteries such as LiFePO , AGM, GEL, and more.
- [Easy to Use] This controller has a handy SAE connector that plugs in easily. Just make sure to connect the red wire to the positive terminal and the black wire to the negative terminal of your battery and solar panel.
- [Warranty and Support] We offer a one-year warranty and lifetime technical support for this controller. We also have a 24/7 customer service team that can answer your questions within a day.
- See more on Amazon...
Brand: SOLPERK | Manufacturer: SOLPERK
See On Amazon #11
SOLPERK 10A Solar Charge Controller Waterproof Solar Panel Controller 12V/24V PWM Solar Panel Battery Intelligent Regulator for RV Boat car with LED Display
Asin: B0946MWYPK
✔️【Indicator Monitoring】You Can Understand Its Current Working Status Through The Three Indicators On The Solar Panel Charge Controller. Load Normal Output: Green Light Is Always On; Battery Is Normal: Green Light Is Always On; Solar Panel Is Charging Normally: Red Light Is Always On..
✔️【What You Get】1 Solar Charger Controller, 1 Manual. Extended 12 Months Warranty And Our 7*24H Technical Service Support. If You Have Any Questions, Please Contact Us Directly..
✔️【Easy To Install And Operate】The Solar Panel Controller Adopts Sae Port, Plug And Play. A Manual With Clear Connection Steps Is Included. There Are 2 Pre-Drilled Holes On The Controller, You Can Install It Anywhere According To Your Needs!.
✔️【Intelligent Protection】Intelligent 3-Stage Pmw Charging Improves Charging Efficiency. The Solar Controller Not Only Extends Battery Life And Improves System Performance, But Also Has Multiple Protection Functions: Battery Under-Voltage, Over-Voltage, Output Overload, Short Circuit, Battery, Solar Panel Anti-Back Connect Protection..
Features
- Waterproof Solar Charge Controller IP67 waterproof, suitable for outdoor use. Automatically identify voltage, 12V Max power: 150W, 24V Max power: 300W. The maximum current is 10A. Compatible with various 12V/24V deep-cycle batteries, such as AGM, GEL, Flooded. Adopting brand MCU chips to realize fast intelligent control and ultra-low standby power consumption.
- Intelligent protection Intelligent 3-stage PMW charging improves charging efficiency. The solar controller not only extends battery life and improves system performance, but also has multiple protection functions: Battery under-voltage, over-voltage, output overload, short circuit, battery, solar panel anti-back connect protection.
- Indicator Monitoring You can understand its current working status through the three indicators on the solar panel charge controller. Load normal output: green light is always on; battery is normal: green light is always on; solar panel is charging normally: red light is always on.
- Easy to install and operate The solar panel controller adopts SAE port, plug and play. A manual with clear connection steps is included. There are 2 pre-drilled holes on the controller, you can install it anywhere according to your needs!
- What You Get 1 solar charger controller, 1 manual. Extended 12 months warranty and our 7*24h technical service support. If you have any questions, please contact us directly.
- See more on Amazon...
Brand: SOLPERK | Manufacturer: SOLPERK
See On Amazon #12
Renogy 12V 30A DC to DC Charger with MPPT, On-Board Battery Charger for Gel, AGM, Flooded and Lithium Batteries, Using Multi-Stage Charging, Charger for Solar Panel and Alternator, in RV, Car, Marine
Asin: B093BB3PCV | Model: 12V 30A DC to DC Charger with MPPT | PartNumber: 12V 30A DC to DC Charger with MPPT | Ean: 0810009719021 | UPC: 810009719021
【Multiple Protections】 Renogy Dc-Dc On-Board Battery Charger Has Multiple Intelligent Protections Includes Battery Isolation, Over-Voltage Protection, Battery Temperature Protection, Over-Current Protection, Overheat Protection, Reverse Current Protection, Solar Panel And Alternator Reverse Polarity Protection, Guaranteeing Charging Safety And Protecting You Batteries..
【Rj45 Communication Port Featured】 Bluetooth Monitoring Ready! Exclusively Available With The Bt-2 Bluetooth Module Accessory And Renogy Dc Home App Available On The Ios And Google Play Stores, You Can Monitor This Device Remotely And Simply Through Your Phone And Stay Constantly Updated..
【Recommended To Match With 40A Anl Fuse】The Renogy Anl Fuse Will Protect Your Controller, Wire, And Battery From Overcurrent..
【Light & Small, Ready To Be Set Up】 With Only 9.6In In Length, 5.7In In Height, And 3.13Lbs In Weight, Renogy Dc-Dc On-Board Battery Charger Is Ready To Be Installed And Adapt To Any Tiny Narrow Installation Space, Resolving Your Concern From Limited Room In You Vehicle..
【3-Phase Mppt Charging Technology】 With Built-In Maximum Power Point Tracking (Mppt), Renogy Dc-Dc On-Board Battery Charger Will Charge Your Service Batteries With Maximized Solar Power, Providing 3-Phase Charging (Bulk, Boost And Float) To Regulate The Whole Charging And Ensure The Batteries Will Be Accurately Charged At The Correct Voltage Levels To 100%..
Features
- Multi-input for Battery Charging Renogy DC-DC On-Board Battery Charger is designed to charge service batteries from a starting battery linked to an alternator or by utilizing solar panels connected directly to the unit, offering multiple charging options and ensuring your battery stay fully charged.
- 3-phase MPPT Charging Technology With Built-in Maximum Power Point Tracking (MPPT), Renogy DC-DC On-Board Battery Charger will charge your service batteries with maximized solar power, providing 3-phase charging (Bulk, Boost and Float) to regulate the whole charging and ensure the batteries will be accurately charged at the correct voltage levels to 100%.
- Multiple Protections Renogy DC-DC On-Board Battery Charger has multiple intelligent protections includes battery isolation, over-voltage protection, battery temperature protection, over-current protection, overheat protection, reverse current protection, solar panel and alternator reverse polarity protection, guaranteeing charging safety and protecting you batteries.
- Light & Small, Ready to be Set Up With only 9.6in in length, 5.7in in height, and 3.13lbs in weight, Renogy DC-DC On-Board Battery Charger is ready to be installed and adapt to any tiny narrow installation space, resolving your concern from limited room in you vehicle.
- RJ45 Communication Port Featured Bluetooth Monitoring Ready! Exclusively available with the BT-2 Bluetooth Module accessory and Renogy DC Home App available on the IOS and Google Play Stores, you can monitor this device remotely and simply through your phone and stay constantly updated.
- Recommended to Match with 40A ANL Fuse The Renogy ANL fuse will protect your controller, wire, and battery from overcurrent.
- See more on Amazon...
First Available: 04/23/2021
Brand: Renogy | Manufacturer: Renogy
Dimensions: 5.70 x 9.60 x 3.00 inches | Weight: 3.13 pounds
Warranty: 2-year material warranty
See On Amazon #13
[Upgraded]30A MPPT Solar Charge Controller, 12V 24V Dual USB Solar Panel Battery Intelligent Regulator with LCD Display, Auto Parameter Adjustable, Timer Setting, Multiple Load Control Modes
Asin: B0CKQYP866
Easy To Read And Adjustable: Easy To Read The Status And Data With An Lcd Display, Which Is Also Able To Switch Modes And Parameter Configuration, Such As Adjustment Of Battery Float, Reconnect, And Stop Discharge Voltage, Which Can Perfectly Protect The Lithium Battery From Over-Discharge, Suitable For Home, Industrial, Commercial, Etc.
Easy To Install And Operate: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load. The Disassembly Sequence Is Contrary To The Wiring Order. Please Refer To The Manual For Details. We Offer A 12-Month Warranty For Quality-Related Issues And Lifetime Technique Support, Please Contact Us If Any Question.
Safe To Use: Built-In Overcurrent Protection, Short Circuit Protection, Reverse Connection Protection, Open Circuit Protection, All Automatic Recovery, No Damage To The Solar Controller, But A Reliable Protector For Your Devices.
Widely Compatibility In Battery: The 30A Solar Charge Controller Is Compatible With 12V Or 24V Systems Automatically, Suitable For Lead-Acid Batteries And Lithium Batteries, But If You Charge Lithium Batteries, You Must Set The Charging Parameters After Connecting To The Power. Dual Usb 5V/3A Output Ports Support Mobiles, Tablet Pcs, Or Other Devices Which Require 5V Voltage. Please Refer To The Manual For More Details.
Features
- UPGRADED MPPT TECHNOLOGY: Detecting the maximum charging current by innovative MPPT technology highly tracking efficiency up to 99%. This MPPT solar charge controller could increase efficiency by 10%-30% compared with ordinary solar charge controller
- WIDELY COMPATIBILITY IN BATTERY: The 30A solar charge controller is compatible with 12V or 24V systems automatically, suitable for lead-acid batteries and lithium batteries, but if you charge lithium batteries, you must set the charging parameters after connecting to the power. Dual USB 5V/3A output ports support mobiles, tablet PCs, or other devices which require 5V voltage. Please refer to the manual for more details
- EASY TO READ AND ADJUSTABLE: Easy to read the status and data with an LCD display, which is also able to switch modes and parameter configuration, such as adjustment of battery float, reconnect, and stop discharge voltage, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial, etc
- SAFE TO USE: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the solar controller, but a reliable protector for your devices
- EASY TO INSTALL AND OPERATE: The charge controller should connect the battery first, then the solar panel, and finally the load. The disassembly sequence is contrary to the wiring order. Please refer to the manual for details. We offer a 12-month warranty for quality-related issues and lifetime technique support, please contact us if any question
- See more on Amazon...
Brand: Rolokit | Manufacturer: Rolokit
See On Amazon #14
SUNER POWER 12V 30W Solar Battery Trickle Charger Maintainer, Built-in Smart MPPT Controller, Waterproof 30 Watt Solar Panel Charging Kit + Mount Bracket for 12 Volt SLA AGM Deey Cycle Lithium Battery
Asin: B0CR6HMGXH | Model: BC-30W-M PRO | PartNumber: BC-30W-M PRO
【 Full Safety Protections 】Built-In Multiple Protections Including Over-Charge, Over-Discharge, Over-Voltage, Over-Current, Over-Load, Short Circuit, Reverse Polarity, And Over-Temperature, Waterproof And Spark-Proof, The Battery Is Fully Protected..
【 Easy To Use 】Using The Most Advanced Mppt Charge Controller Chip, This Solar Trickle Battery Charger Maintainer Starts To Charge Immediately When Battery Is Registered. Pre-Dilled Holes On Frame Allows For Quick Mounting With Included Adjustable Mount Brackets, And All Cables Are Plug And Play, Offering You Easy And Quick Using Experience..
【 Visual Charging Level】The Charge Level Indicators Allow To Visually Monitor The Stage Of Charge Among 25%-50%-75%-100%. It's Not Just A Solar Battery Trickle Charger, It's An Advanced Solar Battery Charger Maintainer. A Fully-Automatic, Worry-Free Smart Solar Battery Charger With Zero Overcharge..
【 Superior Quality And Material】Made Of Premium Grade A+ Solar Cells With Efficiency Up To 21%-30%, Tempered Solar Glass And Durable Corrosion-Resistant Aluminum Frame, Withstand Extreme Weather Conditions Like Uv, Anti-Rusting, And Erosion, Hail, And Sandstorm, Up To 2400Pa Wind Pressure And 5400Pa Snow Load..
【 Three Battery Charging Modes 】Independently Charge And Control Each 12 Volt Battery With Selectable Charging Modes - Including 12V, 12V Agm And 12V Lithium - For All Types Of Lead-Acid Boat, Car, Dump Trailer, Automotive, Marine, Rv, Powersport, Camper And Deep Cycle Batteries, Including Flooded, Gel, Agm, Sla, Vrla And Maintenance-Free, Plus Lifepo4 Lithium Batteries..
【Improved 3-Stages Charging】The Improved 3-Stages Charging Algorithm (Bulk, Absorption, Float) Allows To Charge 12-Volt Battery More Effectively, Ensures Battery Is Safely Recharged And Increases Battery Life And Performance. The Charging Will Be Cut Off When Battery Is Fully Charged, And Automatically Resumed When Battery Is Not Full, Totally Free Maintenace..
Features
- Ultra MPPT Technology This 12v solar panel battery charger is crafted with SUNER POWER's unique UltraSmart MPPT technology, so all of its core parts, including its mppt charge controller and solar panel are built using premium and durable materials. The innovative MPPT-Charge-Controller-Technology allows to deliver high tracking efficiency of up to 99% and peak conversion efficiency of 98%, improve approximately 20%-30% utilization rate than other competitors.
- Improved 3-stages Charging The improved 3-Stages charging algorithm (Bulk, Absorption, Float) allows to charge 12-volt battery more effectively, ensures battery is safely recharged and increases battery life and performance. The charging will be cut off when battery is fully charged, and automatically resumed when battery is not full, totally free maintenace.
- Full Safety Protections Built-in multiple protections including over-charge, over-discharge, over-voltage, over-current, over-load, short circuit, reverse polarity, and over-temperature, waterproof and spark-proof, the battery is fully protected.
- Three Battery Charging Modes Independently charge and control each 12 volt battery with selectable charging modes - including 12V, 12V AGM and 12V Lithium - for all types of lead-acid boat, car, dump trailer, automotive, marine, RV, powersport, camper and deep cycle batteries, including flooded, gel, AGM, SLA, VRLA and maintenance-free, plus lifepo4 lithium batteries.
- Visual Charging Level The charge level indicators allow to visually monitor the stage of charge among 25%-50%-75%-100%. It's not just a solar battery trickle charger, it's an advanced solar battery charger maintainer. A fully-automatic, worry-free smart solar battery charger with zero overcharge.
- Superior Quality and Material Made of premium Grade A+ solar cells with efficiency up to 21%-30%, tempered solar glass and durable corrosion-resistant aluminum frame, withstand extreme weather conditions like UV, anti-rusting, and erosion, hail, and sandstorm, up to 2400Pa wind pressure and 5400Pa snow load.
- Easy to Use Using the most advanced MPPT charge controller chip, this solar trickle battery charger maintainer starts to charge immediately when battery is registered. Pre-dilled holes on frame allows for quick mounting with included adjustable mount brackets, and all cables are plug and play, offering you easy and quick using experience.
- See more on Amazon...
Brand: SUNER POWER | Manufacturer: SUNER POWER
Dimensions: 0.70 x 10.00 x 5.00 inches
See On Amazon #15
LNEX Solar Charge Controller Waterproof, 30A Negative Ground Solar Panel Regulator with Temp Sensor,Backlit LCD, 12V/24V PWM Solar Controller for LiFePO4,AGM, Gel, Flooded and Lithium Battery
Asin: B0CM3VV6B3 | Ean: 0749965098904 | UPC: 749965098904
Visual Solar Monitor: Equipped With Backlit Lcd Display And Multiple Led Indicators To Monitor The Real-Time Solar Current And The Battery Voltage And To Know The Exact Working Condition Of The Solar Panel And Battery. As Well As, The Solar Charger Controller With Auto Memory Function, Automatically Return To Its Last Selected Mode..
Multi-Protection To Ensure Safety:Solar Charge Controller With Negative Ground Which Is The Standard And Most Conventional Way Of Grounding To Ensure Compatibility Keeps You Safe.Morever,Built In Over Temperature Protection, Over Voltage Protection, Over Current Protection, Over Charging Protection, Over Discharging Protection, Over Load Protection, Short Circuit Protection To Provide Full Protection For Your Battery, To Maximally Avoids The Damage Due To System Fault Or Installation Error..
12V/24V Solar Controller: Lnex Solar Charger Controller 30A Can Automatically Detect 12V Or 24V Dc System Voltages And It Works On Multiple Batteries Including Lifepo4,Lto,Gel,Agm,Lead-Acid And Calcium,Efb Batteries,Great For Deep Cycle, Starter, Marine, Car, Rv,Powersport And More..
6-Stage Pwm Technology: The Lnex Solar Panel Controller Equipped With Advanced Smart Pwm Technology With High Charging Efficiency. It Provides 6-Stage Charging (Diagnose,Soft Start,Bulk, Absorption, Float And Equalization) To Increases Battery Life And Improves System Performance, It Will Aslo Equalizate Automaticlly Every 28 Days For Calcium/ Efb Battery..
Features
- Super Thin & Waterproof: Improved the PMW charge controller, LNEX Solar charge controller brings a latest maximizing use solar power to charge your system, it's the most thin solar controller in the market but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. Morever, with an IP65 waterproof design, our solar controller is suitable for outdoor and will remain fully operational when exposed to water spray, rain, or condensation.
- 6-Stage PWM Technology: The LNEX solar panel controller equipped with advanced smart PWM technology with high charging efficiency. It provides 6-stage charging (Diagnose,Soft Start,Bulk, Absorption, Float and Equalization) to increases battery life and improves system performance, It will aslo equalizate automaticlly every 28 days for calcium/ EFB battery.
- Visual Solar Monitor: Equipped with Backlit LCD display and multiple LED indicators to monitor the real-time solar current and the battery voltage and to know the exact working condition of the solar panel and battery. As well as, the solar charger controller with auto memory function, automatically return to its last selected mode.
- 12V/24V Solar Controller: LNEX solar charger controller 30A can Automatically detect 12V or 24V DC system voltages and it works on multiple batteries including LifePo4,LTO,GEL,AGM,Lead-Acid and Calcium,EFB batteries,Great for deep cycle, starter, marine, car, RV,powersport and more.
- Multi-Protection to Ensure Safety:Solar Charge controller with negative ground which is the standard and most conventional way of grounding to ensure compatibility keeps you safe.Morever,Built in over temperature protection, over voltage protection, over current protection, over charging protection, over discharging protection, over load protection, short circuit protection to provide full protection for your battery, to maximally avoids the damage due to system fault or installation error.
- See more on Amazon...
Brand: LNEX | Manufacturer: LNEX
Dimensions: 1.77 x 6.50 x 5.31 inches
See On Amazon #16
EpRec 30A 12V 24V PWM Solar Charge Controller Lithium Battery Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery
Asin: B07VDWTWTW | Ean: 0798825430026 | UPC: 798825430026
【Intelligent Control】This Solar Controller Fit For Lithium-Ion/ Lithium Iron Phosphate /Lead-Acid Batteries(Open,Agm,Gel,) With Mutiple Load Timer(Load Should Be Dc).It Has A Wide Range Of Applicability And Automatically Identifies Daytime/Night.For Protecting The Lifespan Of Your Battery, Once The Voltage Of The Battery Drop Below 8V, The Solar Controller Will Turn Off Automatically..
【Customer First】We Provide 30-Day Free Return And Replacement And 12-Month Warranty Service. You Can Contact Us With Any Questions, And We Will Reply To You Within 24 Hours. Your Satisfaction Is Our Top Priority..
【Safe To Use】Pwm Charge Controller Protection:Dual Mosfet Reverse Current /Over Heat /Under-Voltage Discharge Discharge /Short-Circuit /Open-Circuit / Over-Load /Over-Charging Protection.More Safe For Home, Industrial,Commercial Etc..
【Lcd Display】Backlight Lcd Display Pv/Battery/Load Charge And Discharge Parameter.Dual Usb Can Give Your Electronic Product Max 5V 2.5A..
Features
- Upgraded Solar Panel Controller This 30a solar charge controller compatibility with 12V 24V system.Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle.
- LCD Display Backlight LCD display PV/Battery/Load charge and discharge parameter.Dual USB can give your electronic product max 5V 2.5A.
- Intelligent Control This solar controller fit for lithium-ion/ lithium iron phosphate /Lead-acid batteries(OPEN,AGM,GEL,) with mutiple load timer(Load should be DC).It has a wide range of applicability and automatically identifies daytime/night.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
- Safe to Use PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc.
- Customer First We provide 30-day free return and replacement and 12-month warranty service. You can contact us with any questions, and we will reply to you within 24 hours. Your satisfaction is our top priority.
- See more on Amazon...
Brand: EpRec | Manufacturer: EpRec
Dimensions: 2.76 x 5.26 x 1.38 Inches
See On Amazon #17
PowMr 30A PWM Solar Charge Controller, 12V 24V 36V 48V Auto, LCD Display and Dual USB Output, Fit for AGM, Gel, FLD, Lead-Acid and Lithium Battery Update Version
Asin: B0CZ41D59Q
【3-Stage Pwm Technology】There Are 3 Integrated Charge Modes (Bulk Charge, Boost Charge, Float Charge). Through The Three Stages Of Fast, Efficient And Safe Battery Charging Mode, The System Effectively Optimises Charging Cycles And Extends Battery Life..
【Multiple Protection Functions】Equipped With Overcharge Protection, Overcharge Protection, Overload Protection, Short Circuit Protection And Reverse Current Protection. This 30A Solar Charging Controller Will Help You Improve The Safety Of The Photovoltaic System And Extend The Battery Life..
【Compatible Battery Types】Compatible With 12V 24V 36V 48V Battery Systems, Adaptable To User, Flooded, Agm, Gel, Lifepo4, Lithium, And Other Customized Battery Types. Charge Controllers For Solar Panels Should Connect The Battery First, Then The Solar Panel, And Finally The Load..
【Supported Voltage/Power Ranges】30A Solar Controller Can Accept Solar Voltage Up To 100V. When The Battery Is A 12V System, The Recommended Maximum Input Power Is 360W; For 24V System, The Max. Is 720W; For 36V System, The Max. Is 1080W; For 48V System, Max. Is 1440W..
Features
- Upgraded 30A Solar Charge Controller Auto detect 12V 24V 36V 48V system; Rated Charging Current is 30A; Max. PV Input Voltage is 100V; Max. Input Power is between 360W ~ 1440W; Built-in 2 USB ports with output of 5V and 2A; User-friendly setup with real-time monitoring and parameter configuration via LCD screen.
- Supported Voltage/Power Ranges 30A Solar Controller can accept solar voltage up to 100V. When the battery is a 12V system, the recommended maximum input power is 360W; For 24V system, the Max. is 720W; For 36V system, the Max. is 1080W; For 48V system, Max. is 1440W.
- 3-STAGE PWM Technology There are 3 integrated charge modes (Bulk charge, Boost charge, Float charge). Through the three stages of fast, efficient and safe battery charging mode, the system effectively optimises charging cycles and extends battery life.
- Compatible Battery Types Compatible with 12v 24V 36V 48v battery systems, Adaptable to User, Flooded, AGM, GEL, LifePO4, Lithium, and other customized battery types. Charge controllers for solar panels should connect the battery first, then the solar panel, and finally the load.
- Multiple Protection Functions Equipped with overcharge protection, overcharge protection, overload protection, short circuit protection and reverse current protection. This 30A solar charging controller will help you improve the safety of the photovoltaic system and extend the battery life.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
See On Amazon #18
EPEVER MPPT Solar Charge Controller 30 amp 12V 24V Auto, 30A Solar Charge Controller Max 100V Input Negative Grounded Solar Reulator for Lead-Acid and Lithium Batteries Charging and Discharging
Asin: B0811F75H3
30A Solar Controller Mppt Support For 4 Type Battery Charging: Lead-Acid (Sealed, Agm, Gel, Flooded), User And Lithium). Battery Temperature Compensation Function To Ensure The Controller’S Life. It Protect The Battery From Being Over-Charged By The Solar Modules And Over-Discharged By The Loads..
Mppt Solar Regulator Has Comprehensive Electronic Protection And Can Be Widely Used For Various Applications, E.G. Solar Rv, Car, Boat, Household Systems Industrial Field Monitoring, Etc..
Epever Mppt Solar Controller: A Power Protection Chip, Which Can Provide 5Vdc/200Ma Power And Over-Current, Short-Circuit Protections, Is Adopted By The Communication Interface And Support Monitoring And Setting The Parameters Via The App Or Pc Software. Available To Meet Various Communication Requirements In Different Situations..
30Amp Solar Charge Controller Pv Rated Charge Power: 390W/12V, 780W/24V. Max.Pv Open Circuit Voltage: 100V(92V At 25℃ Environment Temperature). And Has Real-Time Energy Recording And Statistical And Multiple Load Work Modes..
Features
- Solar Charge Controller 30A: 12V 24V Auto identifying system volt. Advanced MPPT, with efficiency no less than 99.5% and accurate recognizing and tracking technology of multi-peaks maximum power point. Maximum DC/DC conversion efficiency of 98%. Automatic limitation of the charging current and charging power.
- 30amp Solar Charge Controller PV Rated Charge Power: 390W/12V, 780W/24V. Max.PV Open Circuit Voltage: 100V(92V At 25 environment temperature). And has real-time energy recording and statistical and multiple load work modes.
- 30A Solar Controller MPPT support for 4 type Battery charging: Lead-acid (Sealed, AGM, Gel, Flooded), User and Lithium). Battery temperature compensation function to ensure the controller s life. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
- EPEVER MPPT Solar Controller: A power protection chip, which can provide 5VDC/200mA power and over-current, short-circuit protections, is adopted by the communication interface and Support monitoring and setting the parameters via the APP or PC software. Available to meet various communication requirements in different situations.
- Mppt Solar Regulator has comprehensive electronic protection and can be widely used for various applications, e.g. solar RV, Car, Boat, household systems industrial field monitoring, etc.
- See more on Amazon...
Brand: EPEVER | Manufacturer: EPEVER
Warranty: Manufacturer warranty for 2 year from date of purchase
See On Amazon #19
Peidesi PWM 30A Solar Charge Controller 12V 24V PV Regulator for Lifepo4 Lithium Gel Lead Acid for 100W 200W 300W Solar Panel LCD Display Dual USB 5V Output PDS-12V30A-CON
Asin: B0B583TVVQ | Model: PDS-12V30A-CON | PartNumber: PDS-12V30A-CON | Ean: 0717981566424 | UPC: 717981566424
Lcd Display: The Solar Panel Charge Controller Has A Large Lcd, Which Can Switch Modes And Adjustable Parameters, Clearly Indicating The Status And Data..
Easy To Apply: The Solar Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load. It Can Be Used For Home, Industry, Commercial, Camping Rv, Etc..
Intelligent And Useful: The Solar Controller Has A Built-In Industrial Microcontroller, Which Automatically Manages And Memorizes Various Parameters Set By The User, And The Data Will Not Be Lost When The Battery Is Exhausted..
Safe To Use: The Solar Panel Controller Has Overcurrent Short Circuit Protection, Reverse Polarity Protection, And Low Voltage Overcharge Protection. Adopts Full 3-Level Pwm Charge Management..
Features
- Wide Compatibility: The Solar Charge Controller is automatically compatible with 12V or 24V systems and is suitable for a variety of batteries: lead-acid batteries, lithium iron phosphate batteries, and ternary lithium batteries.
- Safe to Use: The Solar Panel Controller has overcurrent short circuit protection, reverse polarity protection, and low voltage overcharge protection. adopts full 3-level PWM charge management.
- LCD Display: The Solar Panel Charge Controller has a large LCD, which can switch modes and adjustable parameters, clearly indicating the status and data.
- Intelligent and Useful: The Solar Controller has a built-in industrial microcontroller, which automatically manages and memorizes various parameters set by the user, and the data will not be lost when the battery is exhausted.
- Easy to Apply: The Solar Charge Controller should connect the battery first, then the solar panel, and finally the load. It can be used for home, industry, commercial, camping RV, etc.
- See more on Amazon...
Brand: Generic | Manufacturer: Peidesi
Dimensions: 1.40 x 5.20 x 2.80 Inches
See On Amazon #20
SUNYIMA 30A MPPT Solar Charge Controller with LCD Display Dual USB Multiple Load Control Modes,New Mppt Technical Maximum Charging Current (30A)
Asin: B08L8T73R6 | Model: MPPT 30A | PartNumber: MPPT 30A
【Reliable Protection】Overvoltage, Short Circuit, Overload, Overcharge, Over Discharge Protection Function;Automatic Focusing Mppt Tracking Charging, High Charging Efficiency,Non-Stop Detection During Charging, Bidirectional Focusing Tracking..
【Please Attention】Pls Note The Connection Ways,Connect The Battery First,Then Connect The Solar Panel(You Can't Reverse The Order).The Place That Don't Understand Pls Contact Us,Thanks！.
【Industrial-Grade Master Chip】16Ad Sampling Accuracy, Temperature Charging Current, Discharge Current Accurate Real-Time Display, Power Generation At A Glance..
【Multi-Function Lcd Displays】This Controller Is 12V/24V 12V/24V Automatically Adapt,First Connect The Battery,Then Connect The Solar Panels,When You First Use It, Make Sure The Battery Has Enough Voltage,So That The Controller Can Recognize The Correct Battery Type..
Features
- Dual USB 30A MPPT Solar Charge Controller Using innovative MPPT technology high tracking efficiency up to 99%;Please refer to the information if you are not familiar with Mppt technology:There are many kinds of MPPT technology,Our Solar Controller Mppt technology is to detect the maximum charging current,not the boost type or the automatic charging of the solar panel voltage.
- Multi-function LCD Displays This controller is 12V/24V 12V/24V automatically adapt,first connect the battery,then connect the solar panels,when you first use it, make sure the battery has enough voltage,so that the controller can recognize the correct battery type.
- Reliable Protection overvoltage, short circuit, overload, overcharge, over discharge protection function;Automatic focusing MPPT tracking charging, high charging efficiency,Non-stop detection during charging, bidirectional focusing tracking.
- Industrial-grade Master Chip 16AD sampling accuracy, temperature Charging current, discharge current accurate real-time display, power generation at a glance.
- Please Attention Pls note the connection ways,Connect the battery first,then connect the solar panel(You can't reverse the order).The place that don't understand pls contact us,Thanks
- See more on Amazon...
Brand: SUNYIMA | Manufacturer: SUNYIMA
See On Amazon
Looking For Something Else?
Search