GOHAWKTEQ Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs
Asin: B082M4LL6K
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material: These Sockets And Wrenches Are Forged With High Quality Steel And Gain A High Strength Which Give Them A Better Performance..
Warranty: We Offer 30 Days And 365 Days Free Replacement Warranty..
Design: Special Side Cutout Design Allows Easy Access To Oxygen Sensor From Section And Prevents From Demage To Wire..
Package: There Are 5Pcs Sockets And Wrenches Included In The Red Case, 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
Features
- Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines.
- Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.
- Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire.
- Warranty: We offer 30 days and 365 days free replacement warranty.
- See more on Amazon...
Brand: GOHAWKTEQ | Manufacturer: GOHAWKTEQ
See On Amazon Similar To GOHAWKTEQ Automotive Oxygen Sensor Socket
#1
o2 sensor socket 7/8 o2 sensor socket 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket-Universal
Asin: B08CKVBF9P | Model: A7822F-1 | PartNumber: A7822F-1
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Service】 100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Design】 Standard 6 Point With Low Profile And Slotted Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots..
Features
- Size 7/8 inch (22 millimeter) hex fits almost all oxygen sensors. 3/8 inch square drive for use with ratchet.
- Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
See On Amazon #2
Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Cars
Asin: B0BBLNG7MW
Features: 7/8" (22Mm) Socket Fits Most Oxygen Sensors, Works With Any 3/8" Drive Ratchet Or Breaker Lever, Offset Drive Gate With Wire Links The Sensor From The Side To Prevent Damage To The Wires..
What You Get: 1 X Offset Oxygen Sensor Socket. This Product Is Sure To Meet Your Requirements. If You Have Any Questions, Please Contact Us In Time, We Will Reply You Within 24 Hours..
Function: This Oxygen Sensor Is Very Convenient To Use, The Sensor Is In The Harshest Environments And May Need To Remove Some Elbow Grease, This Quality Tool Will Save You Time! To Help Your Car's Emissions And Fuel Consumption..
Design: The Socket Has A Slotted Design. So You Remove The Oxygen Sensor With The Harness Still Connected. This 3/8" Drive Oxygen Sensor Socket Is Also Offset And Compact, Providing Extra Leverage Even In Hard-To-Reach Locations..
Features
- PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function. The tool meets and exceeds ANSI/ASME standards.
- DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8 drive oxygen sensor socket is also offset and compact, providing extra leverage even in hard-to-reach locations.
- FEATURES: 7/8 (22mm) socket fits most oxygen sensors, works with any 3/8 drive ratchet or breaker lever, offset drive gate with wire links the sensor from the side to prevent damage to the wires.
- FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this quality tool will save you time! to help your car's emissions and fuel consumption.
- WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time, we will reply you within 24 hours.
- See more on Amazon...
Brand: YOGEIER | Manufacturer: YOGEIER
Dimensions: 3.94 x 3.94 x 3.94 Inches
See On Amazon #3
A ABIGAIL 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool
Asin: B07KT1GR7V
【Package】1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket Wrench And Thread Chaser Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
Features
- Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Package 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- Service 100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
See On Amazon #4
TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749, Original Version
Asin: B00GMN4D1Q | Model: 47749 | PartNumber: 47749 | Ean: 0020209477496 | UPC: 020209477496
Offset Drive With Wire Gate Accesses Sensor From The Side, Not The Top, Preventing Damage To Wires.
High-Performance Chrome Molybdenum Steel Construction.
High-Contrast, Permanent, Laser Etched Size Markings Are Easy-To-Read, Even In Low Light.
Use With Any 3/8 Inch Drive Ratchet Or Breaker Bar.
Common 6 Point, 7/8 In. (22Mm) Socket Fits Most Oxygen Sensors.
Features
- Removes and installs oxygen sensors on vehicles with computer-controlled engines
- Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
- Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
- Use with any 3/8 inch drive ratchet or breaker bar
- High-performance chrome molybdenum steel construction
- High-contrast, permanent, laser etched size markings are easy-to-read, even in low light
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 1.20 x 2.20 x 1.40 Inches | Weight: 0.34 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #5
AP1822F 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side, Preventing Damage to Wires
Asin: B07JQ9W74N | Model: . | PartNumber: . | Ean: 0798881149351 | UPC: 798881149351
Function: Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Quality Tool Can Save Your Knuckles And Save You Time!.
Lifetime Warranty - This Socket Comes With A Lifetime Warranty. If The Part Ever Fails Simply Contact Us For A Replacement For Free..
Features:Removes And Installs Oxygen Sensors On Vehicles With Computer-Controlled Engines,Common 6 Point, 7/8 In. (22Mm) Socket Fits Most Oxygen Sensors,Use With Any 3/8 Inch Drive Ratchet Or Breaker Bar,Offset Drive With Wire Gate Accesses Sensor From The Side, Not The Top, Preventing Damage To Wires.
Quality:This Socket Made From Premium Chrome Molybdenum Steel, The Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function. This Tool Meets And Exceeds Ansi/Asme Standards. Apeixoto Offers A Full Line Of Oxygen Sensor Tools Including Our Complete Ap1822f Oxygen Sensor Socket Set That Features Thread Chasers, Oxygen Sensor Sockets And More!.
Features
- DESIGN: Our socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots
- QUALITY:This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. Apeixoto offers a full line of Oxygen Sensor tools including our complete AP1822F Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
- FUNCTION: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- FEATURES:Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors,Use with any 3/8 inch drive ratchet or breaker bar,Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
- LIFETIME WARRANTY - This socket comes with a lifetime warranty. If the part ever fails simply contact us for a replacement for FREE.
- See more on Amazon...
Brand: Apeixoto | Manufacturer: Apeixoto
See On Amazon #6
DURATECH 5PCS O2 Oxygen Sensor Socket Thread Chaser Set, 3/8" 1/2" Drive x 7/8" 22mm Oxygen Sensor Wrench Remover O2 Sensor Removal Tool Kit
Asin: B0CF8MJDF8 | Ean: 0820909796695 | UPC: 820909796695
Special Design: The Wire Gate Of Each O2 Sensor Removal Tool Is Wide Enough To Pass Through The Wire Without Damaging It, Which Is Both Convenient And Safe. And The Square Hole Of This Socket Has A Unique Slotted Design. These Small Slots Have A Good Anti-Slip Effect, Which Can Help To Hold The Ratchet Firmly, Making You More Secure When Using The Tool..
Wide Application: This O2 Sensor Remover Set Is Suitable For Removing, Inspecting, Replacing, And Installing Heated And Non Heated Oxygen Sensors And Vacuum Switches On Most Vehicles Equipped With Computer-Controlled Engines. As An Important Auto Accessory, It Is Easy To Use, Convenient And Practical, Which Can Save Your Time And Energy..
2 Thread Chasers: The M12-1.25" And M18-1.5" Thread Chasers Can Be Used With A 3/8" Ratchet. This Kind Of Tool Is Designed To Re-Tap Threads, Clean And Repair Damaged Threads, Remove Rust And Prevent Future Cross-Threading..
Premium Material: The Oxygen Sensor Remover Set Is Made Of High-Quality Alloy Steel, Meets And Exceeds Ansi/Asme Standards. It Has Surface Phosphating And Heat Treatment To Improve Material Performance And Make It More Durable..
Features
- O2 Sensor Socket Set: The package includes 1PC 1/2" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) long oxygen sensor socket, 1PC M12 x 1.25mm thread chaser and 1PC M18 x 1.5mm thread chaser.
- Premium Material: The oxygen sensor remover set is made of high-quality alloy steel, meets and exceeds ANSI/ASME standards. It has surface phosphating and heat treatment to improve material performance and make it more durable.
- Special Design: The wire gate of each O2 sensor removal tool is wide enough to pass through the wire without damaging it, which is both convenient and safe. And the square hole of this socket has a unique slotted design. These small slots have a good anti-slip effect, which can help to hold the ratchet firmly, making you more secure when using the tool.
- 2 Thread Chasers: The M12-1.25 and M18-1.5 thread chasers can be used with a 3/8 ratchet. This kind of tool is designed to re-tap threads, clean and repair damaged threads, remove rust and prevent future cross-threading.
- Wide Application: This O2 sensor remover set is suitable for removing, inspecting, replacing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles equipped with computer-controlled engines. As an important auto accessory, it is easy to use, convenient and practical, which can save your time and energy.
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co,.LTD
See On Amazon #7
1 Pcs Offset Oxygen Sensor Socket 3/8-Inch Drive by 7/8-Inch 22mm Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Models of Cars Oxygen Sensor Offset Puller
Asin: B0922QJYK8 | Model: YCT02059 | PartNumber: YCT02059 | Ean: 0711731960258 | UPC: 711731960258
This Socket Made From Premium Chrome Molybdenum Steel, The Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function..
Thank You!.
Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Quality Tool Can Save Your Knuckles And Save You Time!.
The Socket Is Slotted So That You Can Remove The Oxygen Sensor While Still Connected To The Wiring Harness, And The Socket Is Offset And Compact, Providing Additional Leverage Even In Hard-To-Reach Spots. This Quality Tool Can Save Your Knuckles And Time！.
Features
- Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors. Use with any 3/8 inch drive ratchet or breaker bar. It s very handy.
- The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots. This quality tool can save your knuckles and time
- This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- Thank you!
- See more on Amazon...
Brand: YCT | Manufacturer: YCT AUTO
See On Amazon #8
DURATECH O2 Oxygen Sensor Socket 3/8" Drive x 7/8"(22mm), Cr-V Oxygen Sensor Remover Tool with Side Wire Gate, O2 Removal and Installation Universal Sensor Socket
Asin: B0CF8M9DJ3 | Ean: 0820909796688 | UPC: 820909796688
Side Wire Gate: The O2 Sensor Removal Tool Is Designed With A Side Wire Gate. It Is Wide Enough To Pass Through The Wire Without Damaging It. This Kind Of Design Allows You To Remove The Oxygen Sensor While Still Connecting The Wire Harness, Which Is Both Convenient And Safe..
Wide Application: This O2 Sensor Remover Is Suitable For Most Cars, You Can Use It To Disassemble, Replace And Clean The Car Oxygen Sensor To Help Reduce Your Car's Emissions And Fuel Consumption. (Attention: Due To The Different Positions Of Oxygen Sensors In Different Cars, For Some Oxygen Sensors Our Product May Not Be Convenient To Operate, Please Confirm The Suitability Before Purchasing.).
Anti-Slip Slotts: The Square Hole Of This Socket Has A Unique Slotted Design. The Four Small Slots Have A Good Anti-Slip Effect, Which Can Help To Hold The Ratchet Firmly, Making You More Secure When Using The Oxygen Sensor Tool..
Premium Material: This Oxygen Sensor Socket Is Made Of High Quality Cr-V Steel, Meets And Exceeds Ansi/Asme Standards. It Has Surface Phosphating To Improve Oxidation And Corrosion Resistance, And Heat Treatment To Improve Material Performance And Make It More Durable..
Features
- Product Size: The O2 sensor socket has a standard 6-point shape. The socket size is 22mm/(7/8"), which can fit most oxygen sensors. The square hole size is 10mm/(3/8"), suitable for 3/8" drive ratchet or breaker bar.
- Premium Material: This oxygen sensor socket is made of high quality Cr-V steel, meets and exceeds ANSI/ASME standards. It has surface phosphating to improve oxidation and corrosion resistance, and heat treatment to improve material performance and make it more durable.
- Side Wire Gate: The O2 sensor removal tool is designed with a side wire gate. It is wide enough to pass through the wire without damaging it. This kind of design allows you to remove the oxygen sensor while still connecting the wire harness, which is both convenient and safe.
- Anti-slip Slotts: The square hole of this socket has a unique slotted design. The four small slots have a good anti-slip effect, which can help to hold the ratchet firmly, making you more secure when using the oxygen sensor tool.
- Wide Application: This O2 sensor remover is suitable for most cars, you can use it to disassemble, replace and clean the car oxygen sensor to help reduce your car's emissions and fuel consumption. (ATTENTION: Due to the different positions of oxygen sensors in different cars, for some oxygen sensors our product may not be convenient to operate, please confirm the suitability before purchasing.)
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co,.LTD
See On Amazon #9
ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket - Wire Gate Accesses Sensor from Side, Preventing Damage to Wires
Asin: B01C4OB3XC | Model: ARES 70039 | PartNumber: ARES 70039 | Ean: 0635983559520, 0818765021402 | UPC: 818765021402
Why You Need It: Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Oxygen Sensor Socket Can Save Your Knuckles And Save You Time!.
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We're Proud To Help This Great Organization..
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools. You Are Backed By Our Performance Assurance Limited Lifetime Warranty. If You Have Any Issues With Your Ares Offset Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Quality: Made From Premium Chrome Molybdenum Steel, The Oxygen Sensor Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function. This Tool Meets And Exceeds Ansi/Asme Standards. Ares Offers A Full Line Of Oxygen Sensor Tools Including Our Complete 70318 Oxygen Sensor Socket Set That Features Thread Chasers, Oxygen Sensor Sockets And More!.
Features
- DESIGN: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. The 6-point beveled nose of this 7/8-Inch (22mm) socket fits oxygen sensors on a wide variety of vehicles. This 3/8-inch drive oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots. For added leverage, you can use it with your 3/8-inch breaker bar or ratchet.
- QUALITY: Made from premium Chrome Molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
- WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time!
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Offset Oxygen Sensor Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
- See more on Amazon...
Brand: ARES | Manufacturer: ARES
Dimensions: 1.00 x 5.80 x 2.71 Inches | Weight: 0.35 Pounds
Warranty: Performance Assurance Limited Lifetime Warranty
See On Amazon #10
7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool
Asin: B07QGCS1B7
【Design】Standard 6 Point With Low Profile And 8Mm X 64Mm Side Cutout Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots..
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Use】 Built For Use With 3/8” Ratchets, 1” Wrenches, And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Size】 7Mm Slot, 7/8” (22Mm) X 6-Point X 3-1/10” (80Mm) Length, 3/8 Inch Square Drive For Use With Ratchet. Fits All Standard Oxygen Sensors With A 7/8” Hexagon Nut..
Features
- High Qulity Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion.
- Size 7mm slot, 7/8 (22mm) x 6-point x 3-1/10 (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8 hexagon nut.
- Design Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- USE Built for use with 3/8 ratchets, 1 wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
See On Amazon #11
T2278F 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket
Asin: B07FFLV7T3
♦ Design: This Socket's Slotted Design Allows You To Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Unique Off Set Design Of The T7822f Oxygen Sensor Wrench Delivers Maximum Torque With Maximum Convenience! Made To Increase Torque On Hard-To-Remove O2 Sensors And Allows You To Access Tough Spots, Easily!.
♦ Warranty: 100% Satisfaction Guarantee, As With All Of Our Products, You Are Covered. If You Don't Like It, Just Return It And Get A Full Refund. All We Wanna Do Is To Make You Satisfy The Wrench And The Service We Provide For You..
♦Using: Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Quality Tool Can Save Your Knuckles And Save You Time!.
♦ Quality: T2278f Oxygen Sensor Wrench Is A Heavy-Duty Tool Which Is Made From Premium Chrome Molybdenum Steel, The Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function..
Features
- Size: Common 6 point, 7/8 inch (22 millimeter) hex fits almost all oxygen sensors; 3/8" drive for ratchets.
- Quality: T2278F Oxygen Sensor Wrench is a heavy-duty tool which is made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- Design: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the unique off set design of the T7822F Oxygen Sensor Wrench delivers maximum torque with maximum convenience! Made to increase torque on hard-to-remove O2 sensors and allows you to access tough spots, easily!
- Using: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- Warranty: 100% Satisfaction Guarantee, As with all of our products, you are covered. If you don't like it, just return it and get a full refund. All we wanna do is to make you satisfy the wrench and the service we provide for you.
- See more on Amazon...
Brand: TOPSCOPE | Manufacturer: THEBIGDEALS
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #12
ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set
Asin: B07P24HCY1 | Model: 13 | PartNumber: 13 | Ean: 0607111538424 | UPC: 607111538424
6-Point 7/8” (22Mm) Socket Opening Fits All Hexagon Oxygen Sensor, Common 3/8” And 1/2” Drive Ends Can Be Used With Ratchet Or Breaker Bar.
Set Including: 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
Special Side Cutout Design Allows Easy Access To Oxygen Sensors From Any Section And Prevents Damage To Wires.
3 Types Of Universal Socket Wrenchs Cover Various Situations Of Oxygen Sensor Location.
Features
- Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 3 types of universal socket wrenchs cover various situations of oxygen sensor location
- 6-point 7/8 (22mm) socket opening fits all hexagon oxygen sensor, common 3/8 and 1/2 drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Set Including: 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.87 x 3.15 x 0.87 inches | Weight: 1.81 Pounds
See On Amazon #13
TEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket | 4929
Asin: B000NPUKIE | Model: 4929 | PartNumber: 4929 | Ean: 0020209049297 | UPC: 020209049297
Side Cutout Prevents Damage To Wires.
Constructed From Drop Forged, Heat Treated, Chrome Vanadium Steel.
High-Contrast, Permanent, Laser Etched Size Markings Are Easy-To-Read, Even In Low Light.
Use With Any 3/8 In. Drive Ratchet Or Breaker Bar.
Common 6 Point, 7/8 In. (22Mm) Socket Fits Most Oxygen Sensors.
Features
- Removes and installs oxygen sensors on vehicles with computer-controlled engines
- Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
- Side cutout prevents damage to wires
- Use with any 3/8 in. drive ratchet or breaker bar
- Constructed from drop forged, heat treated, chrome vanadium steel
- High-contrast, permanent, laser etched size markings are easy-to-read, even in low light
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 2.00 x 5.75 x 1.75 Inches | Weight: 0.55 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #14
BELOMI Oxygen Sensor Socket with Side Wire Cutout, 3/8 Inch Drive x 0.39 Inch (12mm) 6-Point fits All Vehicle O2 Removal and Installation, 65 Mn Steel Universal Puller Oxygen Sensor Socket (Large)
Asin: B0CCNQPS5W | Model: Oxygen Sensor Socket | PartNumber: Oxygen Sensor Socket
【Use】: Our Oxygen Sensor Socket Is Used For Removing And Installing Oxygen Sensors And Hexagonal Vacuum Switches On Cars, It Can Be Used With Ratchet Wrenches And Disconnecting Pliers, Suitable For O2 Removal And Installation On All Vehicles, Very Easy To Use, And It Can Provide Great Convenience For You..
【Service】: You Can Buy With Confidence. Made Of Selected Materials And Careful Craftsmanship, It Is The Ideal Oxygen Sensor Removal Tool. The Goods Are Strictly Inspected Before Shipment, There Are No Errors In Specifications Or Functionality, Provides You With An Excellent Using Experience..
【Design】: Standard 6-Point Slotted Design With Side Cutout To Prevent Wire Damage, Allowing You To Remove The Oxygen Sensor While Still Connecting The Wiring Harness. The Socket Is Biased To Be Compact, Providing Extra Leverage Even In Hard-To-Reach Places..
【Compatible】: Universal 6-Point 7/8 Inch (22Mm) Socket, Hexagonal Shape, Fits Almost All Oxygen Sensors With 7/8" Hex Nuts, 3/8 Inch Square Head At The Top, Can Be Used With Ratchet Wrench. Please Check The Specification Size Before You Purchase..
Features
- Material : Made of high quality 65 manganese steel, hard texture, high strength and excellent durability, will not easily deformed or broken. The black oxidized surface treatment effectively prevents rust and corrosion, can adapt to various working environments and weather conditions, long service life.
- Compatible : Universal 6-point 7/8 inch (22mm) socket, hexagonal shape, fits almost all oxygen sensors with 7/8 hex nuts, 3/8 inch square head at the top, can be used with ratchet wrench. Please check the specification size before you purchase.
- Use : Our oxygen sensor socket is used for removing and installing oxygen sensors and hexagonal vacuum switches on cars, it can be used with ratchet wrenches and disconnecting pliers, suitable for O2 removal and installation on all vehicles, very easy to use, and it can provide great convenience for you.
- Design : Standard 6-point slotted design with side cutout to prevent wire damage, allowing you to remove the oxygen sensor while still connecting the wiring harness. The socket is biased to be compact, providing extra leverage even in hard-to-reach places.
- Service : You can buy with confidence. Made of selected materials and careful craftsmanship, it is the ideal oxygen sensor removal tool. The goods are strictly inspected before shipment, there are no errors in specifications or functionality, provides you with an excellent using experience.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 1.00 x 0.50 x 0.50 Inches
Warranty: 0.2
See On Amazon #15
Oxygen Sensor Socket with Side Wire Cutout 3/8 Inch Drive x 7/8 (22mm) fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket
Asin: B09Z27F7BF | Model: A772223F-BT | PartNumber: A772223F-BT
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Service】 100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Design】 Standard 6 Point With Low Profile And Slotted Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots..
Features
- Size 7/8 inch (22 millimeter) hex fits almost all oxygen sensors. 3/8 inch square drive for use with ratchet.
- Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
Warranty: 1 Year
See On Amazon #16
Orion Motor Tech 7pc Oxygen Sensor Socket Set, O2 Sensor Removal Kit, Oil Pressure Sensor Socket Wrench Set with 22mm 27mm 29mm Sockets 1/2" 3/8" Drives, Oxygen Thermal Oil Pressure Sensor Removers
Asin: B09Q84Y55J | Model: 1007-00 | PartNumber: 1007-00
Wide Application: Perfect For Removal And Installation Of Oxygen Sensors, Oil Pressure Sending Units, Diesel Injectors, Vacuum Switches, And Thermal Sensor Switches, This Heavy-Duty Sensor Socket Removal Kit Is Compatible With Audi, Bmw, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Opel, And Volkswagen Models.
Helpful Storage: A Special Blow-Molded Case Comes Included For Neat And Protected Storage, While This Complete Automotive Tool Set Weighs Only 4.4 Pounds To Give You Convenient Transportation From Home To Garage To Workshop.
Easy Operation: The Slotted Design Of The Sockets Enables You To Remove Oxygen Sensors With The Wiring Still Attached, While The Offset Wrenches Allow For Extra Leverage With Your Breaker Bar Or Ratchet Even In Hard-To-Reach Spots; The Precision Forged Slotting Gives You Maximum Torque With Minimum Effort; And The Large Engraved Sizes On Each Piece Offer Quick Identification.
Heavy-Duty Tools: Each Of The 5 Sockets Is Made Of Heat-Treated Chrome Vanadium Steel With Electroplated Chrome Coating, While The 2 Offset Sensor Wrenches Boast Chrome Molybdenum Steel With Black Oxide Finish, With All Parts Ensuring Superior Wear & Corrosion Resistance And Long-Term Durability Under Even Punishing Use.
Features
- 7-PIECE SOCKET SET: This Orion Motor Tech set comprises a 22mm vacuum switch socket with 3/8" drive, 29mm thermal switch socket with 1/2" drive, 22mm O2 sensor socket with 3/8" drive, 27 mm injector socket with 1/2" drive, 27mm oil sender unit socket with 3/8" drive, 22mm offset O2 sensor wrench with 3/8" drive, and 22mm offset O2 sensor wrench with 1/2" drive
- HEAVY-DUTY TOOLS: Each of the 5 sockets is made of heat-treated chrome vanadium steel with electroplated chrome coating, while the 2 offset sensor wrenches boast chrome molybdenum steel with black oxide finish, with all parts ensuring superior wear & corrosion resistance and long-term durability under even punishing use
- WIDE APPLICATION: Perfect for removal and installation of oxygen sensors, oil pressure sending units, diesel injectors, vacuum switches, and thermal sensor switches, this heavy-duty sensor socket removal kit is compatible with Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Opel, and Volkswagen models
- EASY OPERATION: The slotted design of the sockets enables you to remove oxygen sensors with the wiring still attached, while the offset wrenches allow for extra leverage with your breaker bar or ratchet even in hard-to-reach spots; the precision forged slotting gives you maximum torque with minimum effort; and the large engraved sizes on each piece offer quick identification
- HELPFUL STORAGE: A special blow-molded case comes included for neat and protected storage, while this complete automotive tool set weighs only 4.4 pounds to give you convenient transportation from home to garage to workshop
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 2.00 x 9.00 x 7.00 Inches
Warranty: 1 Year Warranty
See On Amazon #17
DURATECH O2 Oxygen Sensor Socket 3/8-inch Drive x 7/8-inch (22mm), Offset Oxygen Sensor Wrench Cr-Mo Steel, 6-Point O2 Sensor Tool with Wire Gate
Asin: B0BNHZ36CY | Ean: 0820909794837 | UPC: 820909794837
Wire Gate: The Oxygen Sensor Socket Is Designed With A Wire Gate. It Is About 0.41Inch/10.5Mm Wide, Wide Enough To Pass Through The Wire Without Damaging It. This Kind Of Design Allows You To Remove The Oxygen Sensor While Still Connecting The Wire Harness, Which Is Both Convenient And Safe..
Wide Application: This O2 Sensor Wrench Is Suitable For Most Cars, You Can Use It To Disassemble, Replace And Clean The Car Oxygen Sensor To Help Reduce Your Car's Emissions And Fuel Consumption. (Attention: Due To The Different Positions Of Oxygen Sensors In Different Cars, For Some Oxygen Sensors Our Product May Not Be Convenient To Operate, Please Confirm The Suitability Before Purchasing.).
Offset Design: The Socket Is Offset And Compact. Compared To Standard Wrenches, It Can Help You Reach And Provide Extra Leverage Oxygen Sensors In Hard-To-Reach Places More Easily. As An Important Auto Accessory, It Is Convenient And Practical, Which Can Save Your Time And Energy And Better Improve The Performance Of The Car..
Premium Material: This Oxygen Sensor Wrench Is Made Of High Quality Chrome Molybdenum Steel, Meets And Exceeds Ansi/Asme Standards. It Has Surface Phosphating To Improve Oxidation And Corrosion Resistance, And Heat Treatment To Improve Material Performance And Make It More Durable..
Features
- Product Size: The O2 sensor socket has a standard 6-point shape. The socket size is 22mm/(7/8"), which can fit most oxygen sensors. The square hole size is 10mm/(3/8"), suitable for 3/8" drive ratchet or breaker bar.
- Premium Material: This oxygen sensor wrench is made of high quality chrome molybdenum steel, meets and exceeds ANSI/ASME standards. It has surface phosphating to improve oxidation and corrosion resistance, and heat treatment to improve material performance and make it more durable.
- Wire Gate: The oxygen sensor socket is designed with a wire gate. It is about 0.41inch/10.5mm wide, wide enough to pass through the wire without damaging it. This kind of design allows you to remove the oxygen sensor while still connecting the wire harness, which is both convenient and safe.
- Offset Design: The socket is offset and compact. Compared to standard wrenches, it can help you reach and provide extra leverage oxygen sensors in hard-to-reach places more easily. As an important auto accessory, it is convenient and practical, which can save your time and energy and better improve the performance of the car.
- Wide Application: This O2 sensor wrench is suitable for most cars, you can use it to disassemble, replace and clean the car oxygen sensor to help reduce your car's emissions and fuel consumption. (ATTENTION: Due to the different positions of oxygen sensors in different cars, for some oxygen sensors our product may not be convenient to operate, please confirm the suitability before purchasing.)
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co,.LTD
See On Amazon #18
Offset Oxygen Sensor Socket, 3/8-Inch Drive by 7/8-Inch 22mm, Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Models of Cars
Asin: B0BMGBK19Q
Function:Even If You Don't Have A Lot Of Driving Experience, You Can Replace Your Oxygen Sensor With This High Quality Tool To Help Your Car's Emissions And Gas Mileage. Allows You To Remove The Oxygen Sensor While Still Connecting The Wiring Harness, And The Socket Is Biased And Compact, Providing Extra Leverage Even In Hard-To-Reach Places, This High Quality Tool Will Not Only Save You Time But Also Do Exactly What You Want..
Service --- If You Have Any Questions About The Product, You Can Contact Us By Email, We Will Solve You As Soon As Possible..
Products Include:1Pcs Offset Oxygen Sensor Socket. This High Quality Tool Can Save You Time! , Can Meet Your Daily Needs..
Design: The Standard 6-Point Slotted Design, 7/8 In (22Mm) Socket Hex Fits Almost All Oxygen Sensors; Use With 3/8 Inch Drive Ratchet Or Breaker Bar, Offset Drive Gate With Wire Links The Sensor From The Side To Prevent Damage To The Wires.Very Convenient, Please Rest Assured Use..
Features
- High Quality Material: Offset oxygen sensor socket Made of high-quality chromium-molybdenum steel,the socket allows users to exert maximum torque and allows you to access tough spots, the precision casting ensures accurate fit and function, black oxide surface treatment prevent rust.
- Design: The standard 6-point slotted design, 7/8 in (22mm) socket hex fits almost all oxygen sensors; Use with 3/8 inch drive ratchet or breaker bar, offset drive gate with wire links the sensor from the side to prevent damage to the wires.very convenient, please rest assured use.
- Function:Even if you don't have a lot of driving experience, you can replace your oxygen sensor with this high quality tool to help your car's emissions and gas mileage. allows you to remove the oxygen sensor while still connecting the wiring harness, and the socket is biased and compact, providing extra leverage even in hard-to-reach places, this high quality tool will not only save you time but also do exactly what you want.
- Products Include:1Pcs offset oxygen sensor socket. This high quality tool can save you time! , can meet your daily needs.
- Service --- If you have any questions about the product, you can contact us by email, we will solve you as soon as possible.
- See more on Amazon...
Brand: stymart | Manufacturer: stymart
See On Amazon #19
Oxygen Sensor Socket,7/8 inch O2 Sensor Socket for Automotive Replacement Oxygen Sensors,Opening Size 0.65" O2 Sensor Removal Tool for Quick Installation & Removal Car Accessories (Big)
Asin: B0CL5Z9DF2 | Model: Oxygen Sensor Socket | PartNumber: Oxygen Sensor Socket
🔎 【Quick And Easy Installation】 Our Sensor Set Can Be Used With Ratchets And Torque Wrenches, And The Side Cutout Design Allows For Easy Access To The Sensor From Any Part, Making Removal And Maintenance Of The Sensor Easy And Stress-Free, And Saves Your Valuable Time!.
🔎 【Perfect After-Sales Service】 We Are Dedicated To Creating The Perfect Car Accessories For You, And All Products Will Be Carefully Inspected By Our Staff Before They Are Shipped To You! If You Have Any Questions, Please Contact 24 Hours Online Customer Service, Will Solve All Problems For You!.
🔎 【Wide Range Of Applications】 Sensor Removal Tool Is Compatible With All Computer-Controlled Engine Vehicles And Some Motorcycles With 7/8" Hex Nut Oxygen Sensors, And Is Also Suitable For Removing, Inspecting, Replacing And Installing Heated And Non-Heated Sensors On Most Vehicles..
🔎 【Exquisite And Clever Design】 The Oxygen Sensor Tool Has A 7/8-Inch (22-Millimeter) Opening And A 3/8-Inch Square Head To Fit Virtually All Automotive Hexagonal Sensors. It Is Designed With A Small Opening In The Side To Make Installation And Removal Easier And To Prevent Damage To Wires..
Features
- Premium Quality Material Sensor socket set are made from heavy-duty chrome vanadium steel for strength, material selection, longevity, resistance to deformation and abrasion! Providing you with the best possible feel for use, no matter how harsh the environmental conditions!
- Exquisite and Clever Design The oxygen sensor tool has a 7/8-inch (22-millimeter) opening and a 3/8-inch square head to fit virtually all automotive hexagonal sensors. It is designed with a small opening in the side to make installation and removal easier and to prevent damage to wires.
- Quick and Easy Installation Our sensor set can be used with ratchets and torque wrenches, and the side cutout design allows for easy access to the sensor from any part, making removal and maintenance of the sensor easy and stress-free, and saves your valuable time!
- Wide Range of Applications Sensor removal tool is compatible with all computer-controlled engine vehicles and some motorcycles with 7/8 hex nut oxygen sensors, and is also suitable for removing, inspecting, replacing and installing heated and non-heated sensors on most vehicles.
- Perfect After-Sales Service We are dedicated to creating the perfect car accessories for you, and all products will be carefully inspected by our staff before they are shipped to you! If you have any questions, please contact 24 hours online customer service, will solve all problems for you!
- See more on Amazon...
Brand: IHOTDER | Manufacturer: ihotder
Dimensions: 1.22 x 3.58 x 1.22 inches | Weight: 0.50 pounds
Warranty: Warranty Within 6 Months
See On Amazon
Looking For Something Else?
Search