ZYauto Coilovers for Mazda Miata 1990-2005, for Mazda MX-5 1989-1998, 24 Way Adjustable Damper Coilovers Suspension Kit, Coil Spring Shock Absorber Amortiguador Lowering Kit by 1-3 Red
Asin: B0839DGV2Z | Model: 1170 | PartNumber: 1170 | Ean: 6941689877658
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.ăSpring Rateă Spring Rate Front: 7Kg/Mm (392Lbs/In); Spring Rate Rear: 6Kg/Mm (336Lbs/In); Spring Preload: 7-10 Mm; Adjustable Camber Plate: No. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
ăTwin-Tube Structureă Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
ăLowering Kitsă The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
ă24 Rebound Force Levels For More Controlă Level 0-8 Suggest For Street UseïŒLevel 9-16 Suggest For Mountain Anfractuosities UseïŒLevel 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- For Mazda MX5 I (NA) 1989-1998;for Mazda MX5 II (NB)1998-2005;For Mazda Miata MX5 NA (1.6L,1.8L) 1989-1997; For Mazda Miata MX5 NB (1.6L,1.8L) 1998- 2005;For Mazda Miata Base Convertible 2D 1990-2005(exclude 1998); For Mazda Miata SE Convertible 2D 2000-2003;For Mazda Miata M Edition Convertible 2D 1994-1997;For Mazda Miata LS Convertible 2D 2000-2005
- 24 Rebound Force Levels for More Control Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Spring rate Front: 7kg/mm (392lbs/in); Spring rate Rear: 6kg/mm (336lbs/in); Spring Preload: 7-10 mm; Adjustable camber plate: No. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lowering Kits The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: ZYauto | Manufacturer: ZYauto
Dimensions: 8.27 x 24.80 x 20.08 Inches | Weight: 47.13 Pounds
See On Amazon Similar To ZYauto Coilovers for Mazda Miata
#1
Rev9 R9-HPX-1050_1 Hyper-Street ONE Adjustable Coilovers Lowering Kit, 16 Damping Levels, Compatible With Mazda Miata (NA) 1990-97
Asin: B09HYYTB2W
Mono-Tube Shock Design With 16 Levels Of Damping Force Adjustment Combined With Upgrade Spring Rate..
No Install Instructions, Install By Experienced Professionals Is Recommended. Adjustment Requires. Limited Warranty Prodvided By Manufacturer(Parts Only).
Sport Tuned Lowering Springs To Ensure Ride Improvement; Lower Range From 1.25 To 2.25 Inch Drop(May Vary Depends On Car Models, Not Super Low Type); Affordable Pricing Performance Suspensions Upgrade; Improve Overall Handling And Ride Quality When Lowered..
Spring Rate (Front/Rear) : 10 Kg/Mm (560 Lbs/Inch)/8 Kg/Mm (448 Lbs/Inch); Damping Levels: 16 Levels.
Features
- Compatible With Mazda Miata (NA) 1990 1991 1992 1993 1994 1995 1996 1997 1998
- Spring Rate (Front/Rear) : 10 kg/mm (560 lbs/inch)/8 kg/mm (448 lbs/inch); Damping Levels: 16 Levels
- Mono-Tube Shock Design With 16 Levels of Damping Force Adjustment Combined With Upgrade Spring Rate.
- Sport Tuned Lowering Springs To Ensure Ride Improvement; Lower Range From 1.25 to 2.25 inch Drop(May Vary Depends on Car Models, NOT SUPER LOW TYPE); Affordable Pricing Performance Suspensions Upgrade; Improve Overall Handling and Ride Quality When Lowered.
- No Install Instructions, Install By Experienced Professionals Is Recommended. Adjustment Requires. Limited Warranty Prodvided By Manufacturer(Parts Only)
- See more on Amazon...
Brand: Rev9 | Manufacturer: Rev9
Warranty: Parts
See On Amazon #2
ASTOU Adjustable Coilover Struts Fit for Mazda for Miata 1990-1997 1999-2005 Replace Coilover Struts Shock Struts Kits Assembly(Green)
Asin: B0CQ413P22 | Model: Adjustable | PartNumber: Adjustable
Excellent Quality - Designed To Withstand Rigorous Use And Provide Durability And Longevity. They Are Manufactured From High-Quality Materials And Rigorously Tested To Ensure Reliable Performance In A Variety Of Driving Conditions.
One Set Is Enough - The Kit Includes All The Components You Need. Regular Inspections Can Significantly Reduce Maintenance Time And Replacement Costs..
Installation Tips - Appropriate Knowledge And Skills Required. It Is Recommended To Consult A Professional Or Experienced Mechanic To Ensure Proper Installation And Setup For Optimal Performance.
Coilovers Suspension Shocks Strut Kits - Front Struts: 8Kg, Rear Struts: 6Kg Provides Significant Performance Gains, Improved Handling And Stability, And Enhanced Overall Grip And Responsiveness.
Features
- FITMENT - Coilovers Suspension Shocks Strut Kits Only replace for Mazda for Miata 1990-1997 1999-2005
- Coilovers Suspension Shocks Strut Kits - Front struts: 8kg, Rear struts: 6kg Provides significant performance gains, improved handling and stability, and enhanced overall grip and responsiveness
- Excellent Quality - Designed to withstand rigorous use and provide durability and longevity. They are manufactured from high-quality materials and rigorously tested to ensure reliable performance in a variety of driving conditions
- Installation Tips - Appropriate knowledge and skills required. It is recommended to consult a professional or experienced mechanic to ensure proper installation and setup for optimal performance
- One Set is Enough - the kit includes all the components you need. Regular inspections can significantly reduce maintenance time and replacement costs.
- See more on Amazon...
Brand: ASTOU | Manufacturer: ASTOU
Dimensions: 8.27 x 29.92 x 17.91 Inches | Weight: 38.21 Pounds
See On Amazon #3
TENKIDOM Front Hood Struts Compatible with Mazda MX-5 Miata (NC) 2006-2015 Shock Lift Supports Bonnet Gas Dampers Springs Kit No-Drill Bolt-on
Asin: B0CNR8V45B
đăHigh-Quality MaterialăIn Addition To The Classic Aluminum Alloy Lift Supports, We Also Have Upgraded Material Carbon Fiber Lift Supports, Which Are Lightweight And Durable. Unique Design Adds A Touch Of Luxury And Style To Your Car..
đăBest ServiceăWe Provide A 2-Year Quality Warranty And 24-Hour Email Support To Ease Your Concerns..
đăExclusive CustomizationăProvides You With Many Sizes And Styles. If You Have Any Questions Or Production Requirements About The Product, Please Feel Free To Contact Us..
đăEasy To InstallăNo Modification, Drilling Or Cutting Required. Even Amateurs Can Install It Easily..
Features
- Applications Perfectly suitable for the FRONT HOOD of MX-5 Miata (NC) 2006-2015
- Easy to Install No modification, drilling or cutting required. Even amateurs can install it easily.
- High-quality Material In addition to the classic aluminum alloy lift supports, we also have upgraded material carbon fiber lift supports, which are lightweight and durable. Unique design adds a touch of luxury and style to your car.
- Exclusive customization Provides you with many sizes and styles. If you have any questions or production requirements about the product, please feel free to contact us.
- Best Service We provide a 2-year quality warranty and 24-hour email support to ease your concerns.
- See more on Amazon...
Brand: TENKIDOM | Manufacturer: TENKIDOM
See On Amazon #4
R9-HS2-030_1 compatible with Mazda Miata (NA) 1990-97 Hyper-Street II Coilover Kit w/ 32-Way Damping Force Adjustment Lowering Kit by Rev9, 32 Damping Level Adjustment
Asin: B07N8HP7GW
Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
These Coilovers Are "Lowering Kit" And Does Not Adjust To Factory Ride Height. No Installation Instructions; Install By Experienced Professionals Recommended.
Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
Spring Rate (Front/Rear) : 6 Kg/Mm/8 Kg/Mm; Damping Levels: 32 Ways.
Features
- Compatible With Mazda Miata MX-5 (NA) 1990 1991 1992 1993 1994 1995 1996 1997
- Spring Rate (Front/Rear) : 6 kg/mm/8 kg/mm; Damping Levels: 32 Ways
- Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way
- Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately
- These Coilovers are Lowering Kit and DOES NOT adjust to Factory Ride Height. No Installation Instructions; Install By Experienced Professionals Recommended
- See more on Amazon...
Brand: Rev9 | Manufacturer: Rev9
Warranty: Parts
See On Amazon #5
Rev9 R9-HPX-1050_2 Hyper-Street ONE Coilover Lowering Kit, Adjustable, Compatible With Mazda Miata (NB) 1999-05
Asin: B087JBCSXV
Mono-Tube Shock Design With 16 Levels Of Damping Force Adjustment Combined With Upgrade Spring Rate..
No Install Instructions, Install By Experienced Professionals Is Recommended. Adjustment Requires. Limited Warranty Prodvided By Manufacturer(Parts Only).
Sport Tuned Lowering Springs To Ensure Ride Improvement; Lower Range From 1.25 To 2.25 Inch Drop(May Vary Depends On Car Models, Not Super Low Type); Affordable Pricing Performance Suspensions Upgrade; Improve Overall Handling And Ride Quality When Lowered..
Spring Rate: Front - 10 Kg/Mm (560 Lbs/Inch) | Rear - 8 Kg/Mm (448 Lbs/Inch) // Damping Levels: 16 Levels // Top Mount: Front - Yes, Standard Pillow Ball | Rear - Yes, Standard Top Mount.
Features
- Compatible With Mazda Miata (NA) 1999 2000 2001 2002 2003 2004 2005
- Spring Rate: Front - 10 kg/mm (560 lbs/inch) | Rear - 8 kg/mm (448 lbs/inch) // Damping Levels: 16 Levels // Top Mount: Front - Yes, Standard Pillow Ball | Rear - Yes, Standard Top Mount
- Mono-Tube Shock Design With 16 Levels of Damping Force Adjustment Combined With Upgrade Spring Rate.
- Sport Tuned Lowering Springs To Ensure Ride Improvement; Lower Range From 1.25 to 2.25 inch Drop(May Vary Depends on Car Models, NOT SUPER LOW TYPE); Affordable Pricing Performance Suspensions Upgrade; Improve Overall Handling and Ride Quality When Lowered.
- No Install Instructions, Install By Experienced Professionals Is Recommended. Adjustment Requires. Limited Warranty Prodvided By Manufacturer(Parts Only)
- See more on Amazon...
Brand: Rev9 | Manufacturer: Rev9
Warranty: Parts
See On Amazon #6
BC Racing BR Series Coilovers compatible with 89-05 MAZDA Miata / MX5 - NA8C/NB8C
Asin: B00E0PRKQI | Model: 89-05 | PartNumber: 89-05
Custom Kits Available (Contact Us Prior To Ordering).
Front Camber Plates Will Be Included Only On Applicable Vehicles.
With Easily Accessible Adjustment Knobs For Fine-Tuning Compression And Rebound, Ride Height Adjustment Independent Of Shock Stroke And Spring Preload, Having A Performance Coilover System Has Never Been Easier.
Features
- The BR Series Model is the perfect choice for street driving and the occasional road course or autocross duty
- With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke and spring preload, having a performance coilover system has never been easier
- Custom Kits available (Contact us prior to ordering)
- Front camber plates will be included only on applicable vehicles
- See more on Amazon...
Brand: BC Racing | Manufacturer: BC Racing
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 20.00 Pounds
See On Amazon #7
MYFSPORTS Hood Struts for Mazda MX5 NA/NB 1989-1997 1998-2005 Eunos Roadster MX-5 Miata No-Drill Bonnet Lift Supports Gas Dampers Springs Full Kit 2-Year, Plain Black
Asin: B0B3TDW638 | Ean: 0605832221137 | UPC: 605832221137
đăCarbon Fiberă-100% Genuine Carbon Fiber Making Your Car Look More Luxurious. It Has Higher Strength And Better Durability..
đăCustomizationă-We Can Make All Kinds Of Lift Supports. Please Don't Hesitate To Contact Us If You Need Any Size Or Color~.
đăHigh Qualityă-We're Extremely Proud Of The Superior Quality Of Our Lift Supports, So We Offer A 2-Year Warranty..
đăEasy To Installă-1 Person & 20 Minutes! No Drilling Required. Just Fix The Brackets With Your Car's Original Screws..
Features
- FITMENT -specially made for Mazda MX5 1st 2nd (NA/NB) 1989-1997 1998-2005 Eunos Roadster MX-5 Miata
- EASY TO INSTALL -1 Person & 20 Minutes! No drilling required. Just fix the brackets with your car's original screws.
- CARBON FIBER -100% genuine carbon fiber making your car look more luxurious. It has higher strength and better durability.
- HIGH QUALITY -we're extremely proud of the superior quality of our lift supports, so we offer a 2-YEAR WARRANTY.
- CUSTOMIZATION -we can make all kinds of lift supports. Please don't hesitate to contact us if you need any size or color~
- See more on Amazon...
Brand: MYFSPORTS | Manufacturer: Liuhaitec
Warranty: 2-YEAR WARRANTY
See On Amazon #8
maXpeedingrods Coilovers for Mazda MX-5 1989-2005, for Mazda Miata 1990-2005, Coil Spring Shock Absorber Struts, Height Adjustable Coilovers Suspension Kit, Amortiguador Lowering Kit by 1-3 Gold
Asin: B0C5HG4TTD
ăLowering Kitsă The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
ăExcellent MaterialăThe Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
ăTwin-Tube Structureă Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
ăSpring Rateă Spring Rate Front: 7Kg/Mm (392Lbs/In); Spring Rate Rear: 6Kg/Mm (336Lbs/In); Spring Preload: 7-10 Mm; Spring Length Front: 180Mm & Spring Length Rear: 160Mm ; Front Spring Inner Diameter:70.5Mm & Rear Spring Inner Diameter: 70.5Mm; Coilover Overall Length Front: 335-385Mm & Coilover Overall Length Rear: 430-530Mm.
Features
- Application For Mazda MX5 I (NA) 1989-1998;for Mazda MX5 II (NB)1998-2005;For Mazda Miata MX5 NA (1.6L,1.8L) 1989-1997; For Mazda Miata MX5 NB (1.6L,1.8L) 1998- 2005;For Mazda Miata Base Convertible 2D 1990-2005(exclude 1998); For Mazda Miata SE Convertible 2D 2000-2003;For Mazda Miata M Edition Convertible 2D 1994-1997;For Mazda Miata LS Convertible 2D 2000-2005
- Spring Rate Spring rate Front: 7kg/mm (392lbs/in); Spring rate Rear: 6kg/mm (336lbs/in); Spring Preload: 7-10 mm; Spring length Front: 180mm & Spring length Rear: 160mm ; Front spring inner diameter:70.5mm & Rear spring inner diameter: 70.5mm; Coilover overall length Front: 335-385mm & Coilover overall length Rear: 430-530mm
- Lowering Kits The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
See On Amazon #9
Skunk2 Racing (541-10-1100) Pro ST Coilover for 1989-2005 Mazda Miata,regular
Asin: B00OUVDE4E | Model: 541-10-1100 | PartNumber: 541-10-1100 | Ean: 0873265008216 | UPC: 873265008216
One-Piece Forged Shock Body.
Billet Aluminum Spring Perches.
Cnc Wound Sae9254v Racing Springs.
Independent Pre-Load/ Ride-Height Adjustments.
Reduced Shaft Stroke For Full Suspension Travel On Lowered Vehicles.
Micro-Polished Oversized Piston Shaft.
Fitment: 1990 - 2005 Mazda Mx-5 Miata (1.8L Nb).
12-Way Adjustable Dampening.
Features
- Mono-Tube Design
- 12-Way Adjustable Dampening
- One-Piece Forged Shock Body
- Micro-Polished Oversized Piston Shaft
- Independent Pre-Load/ Ride-Height Adjustments
- Reduced Shaft Stroke for Full Suspension Travel on Lowered Vehicles
- Billet Aluminum Spring Perches
- CNC Wound SAE9254V Racing Springs
- Fitment: 1990 - 2005 Mazda MX-5 Miata (1.8L NB)
- See more on Amazon...
First Available: 10/24/2014
Brand: Skunk2 Racing | Manufacturer: Skunk2
Dimensions: 0.00 x 0.00 x 0.00 Inches
Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.
See On Amazon #10
TOPair Air Struts Air Bag Suspension w/DIGI Bluetooth/Remote Management for 1989-2005 Mazda Miata
Asin: B0CVZ6G39G | Model: TT-M101-ABT | PartNumber: TT-M101-ABT | Ean: 0734025534669 | UPC: 734025534669
On-The-Fly Ride Height Adjustment For A Low Stance Or Raised To Avoid Hazards, Dips Or Adapt To Increased Weight. Direct Bolt-On Fitment..
Control Front And Rear Independently Via Dash Mountable Electronic Controller, Bluetooth (Free Ios And Android App) Or Rf Keychain Remote..
Digital Gauge Allows You To Monitor Front, Rear And Tank Air Pressure Along With Vehicle Voltage..
Adjustable Lower Mounts Allow For Ride Height Adjustment Independent Of Spring Pressure, Allowing For Fine-Tuning Of Pressure/Ride Height..
Digi Air Management System Provides A Complete Kit With Everything Needed To Complete The Install And Operate Your Topair Air Struts..
Application-Specific, Tuned Dampers Are Electroplated For Maximum Corrosion Resistance..
Includes High Performance Viair 444C Compressor In Chrome Finish, ÂŒâ Air Line, All Necessary Push-To-Connect Fittings, Power Wire, Pressure Switch And 4 Gallon Tank..
Topair Struts Are Application-Specific, Engineered, And Manufactured With Proven Materials, Offering Exceptional Value.
Features
- Includes Upper Mounts, adjustable lower mounts (Sleeve air springs)
- TOPair Struts are application-specific, engineered, and manufactured with proven materials, offering exceptional value
- On-the-fly ride height adjustment for a low stance or raised to avoid hazards, dips or adapt to increased weight. Direct bolt-on fitment.
- Application-specific, tuned dampers are electroplated for maximum corrosion resistance.
- Adjustable lower mounts allow for ride height adjustment independent of spring pressure, allowing for fine-tuning of pressure/ride height.
- DIGI Air Management system provides a complete kit with everything needed to complete the install and operate your TOPair Air Struts.
- Control front and rear independently via dash mountable electronic controller, Bluetooth (free iOS and Android app) or RF keychain remote.
- Digital gauge allows you to monitor front, rear and tank air pressure along with vehicle voltage.
- Includes high performance VIAIR 444C compressor in chrome finish, air line, all necessary push-to-connect fittings, power wire, pressure switch and 4 gallon tank.
- See more on Amazon...
Brand: Touring Tech | Manufacturer: TOPair
Warranty: 2 Year
See On Amazon #11
FAPO Adjustable Height Coilover Suspension Strut Lowering Kit, Mono-Tube Compatible with Mazda MX5 MX-5 Miata NA NB 1989-2005 Shock
Asin: B0B4S63L2X | Model: PS007310-41 | PartNumber: PS007310-41
Spring Rate: Front: 10 Kg/Mm(560 Lbs/Inch), Rear: 8 Kg/Mm(448 Lbs/Inch), Spring Preload 7-10Mm; And Spring Length Front 180Mm & Spring Length Rear 160Mm Mono-Tube: Design Improve Your Handling Performance Without Sacrifice Comfortable Ride. A Fast And Affordable Way To Easily Upgrade Your Car's Appearance.Ideal For Any Track, Drift And Fast Road And Can Also Be Used For Daily Driving..
Painted:The Pipe Body Use Our Self-Developed Surface Treatment Process, Which Has Stronger Anti-Rust Ability.It Can Meet The Needs Of Different Ground Driving Vehicle Owners..
Full-Length Adjustable: Adjustable The Height Of The Car By Moving The Spring Seat Lock Up And Down, Simple Structure, Easy To Use; Lowering Height By 1-3 Inches..
Spring Rate: Front: 10 Kg/Mm(560 Lbs/Inch), Rear: 8 Kg/Mm(448 Lbs/Inch), Spring Preload 7-10Mm; And Spring Length Front 180Mm & Spring Length Rear 160Mm.
Features
- COMPATIBLE:For Mazda MX-5 I 1989-1997 (NA8C) & MX-5 II 1998-2005 (NB8C); For Mazda Miata MX-5 NA8C 1989-1997 & NB8C 1998- 2005; For Mazda Miata Base Convertible 2D 1990-2005 & SE Convertible 2D 2000-2003 & LE Convertible 2D 1993 & STO Convertible 2D 1997 & LS Convertible 2D 2000-2005 & M Edition Convertible 2D 1994-1997 & 10th Anniversary Convertible 2D 1999; For Mazda Miata mx5 convertible 1997 base model
- SPRING RATE: Front: 10 kg/mm(560 lbs/inch), Rear: 8 kg/mm(448 lbs/inch), Spring Preload 7-10mm; And Spring Length Front 180mm & Spring Length Rear 160mm
- SPRING RATE: Front: 10 kg/mm(560 lbs/inch), Rear: 8 kg/mm(448 lbs/inch), Spring Preload 7-10mm; And Spring Length Front 180mm & Spring Length Rear 160mm MONO-TUBE: Design Improve Your Handling Performance without Sacrifice Comfortable Ride. A fast and Affordable Way to Easily Upgrade Your Car's Appearance.Ideal for Any Track, Drift and Fast Road and Can Also be Used for Daily Driving.
- FULL-LENGTH ADJUSTABLE: Adjustable the height of the car by moving the spring seat lock up and down, Simple structure, easy to use; Lowering height by 1-3 inches.
- PAINTED:The pipe body use our self-developed surface treatment process, which has stronger anti-rust ability.It can meet the needs of different ground driving vehicle owners.
- See more on Amazon...
Brand: FAPO RACING | Manufacturer: FAPO RACING
Warranty: 2 Year
See On Amazon #12
SENSEN 2580 Front or Rear Struts Compatible with 1990-1997 Mazda Miata Full Set
Asin: B075MP8JJW | Model: 2580 | PartNumber: 2580 | Ean: 0045635767232 | UPC: 045635767232
Features
- Cross Reference Number: 2701-248194, 2701-248198, 345439, 345442, G51195, G51196, 341127, 341143, 71245, 71285
- See more on Amazon...
Brand: Sensen Shocks & Struts | Manufacturer: SENSEN
Dimensions: 5.00 x 21.75 x 20.00 Inches | Weight: 25.00 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon #13
INEEDUP Complete Coilovers Struts Shocks Replacement Fit 1990-2007, 2009-2005 for Mazda for Miata MX5 MX-5 NA NB
Asin: B0CKXJVG64 | Model: Adjustable | PartNumber: Adjustable
Height Adjustment Setting - Coilovers Are Typically Reserved For Performance Level Vehicles, Where Height Requirements Call For A More Finely Tuned Setup. WhatâS More, Our Coilover Can Adjust The Height.
Notice - Please Check The Description And Compatibility Chart Before Your Purchase.Please Get In Touch With Us If You Have Any Questions.
Component Installation - A Coilover Combines The Abilities Of A Strut, With The Damping Of A Shock, And Allows The Entire Assembly To Be Installed As A Single Unit, Rather Than Tearing Down The Vehicles Coil Springs, Mounts, Struts, Etc All Separately.
Advantage - Coilovers Allow Height Adjustment, Whether Lifting Or Lowering The Vehicle, Depending On The Application. This Could Mean Lowering For A Street Vehicle To Lower The Center Of Gravity In Order To Meet The Demands Of The Driver.
Features
- FITMENT - The Coilovers Struts Shocks Fit 1990-2007, 2009-2005 for Mazda for Miata MX5 MX-5 NA NB
- ADVANTAGE - Coilovers allow height adjustment, whether lifting or lowering the vehicle, depending on the application. This could mean lowering for a street vehicle to lower the center of gravity in order to meet the demands of the driver
- HEIGHT ADJUSTMENT SETTING - Coilovers are typically reserved for performance level vehicles, where height requirements call for a more finely tuned setup. What s more, our coilover CAN adjust the height
- COMPONENT INSTALLATION - A coilover combines the abilities of a strut, with the damping of a shock, and allows the entire assembly to be installed as a single unit, rather than tearing down the vehicles coil springs, mounts, struts, etc all separately
- NOTICE - Please check the description and compatibility chart before your purchase.Please get in touch with us if you have any questions
- See more on Amazon...
Brand: Ineedup | Manufacturer: INEEDUP
Dimensions: 8.27 x 29.92 x 17.91 Inches | Weight: 38.21 Pounds
See On Amazon #14
MMX3230 MAXX Coilovers Lowering Kit, Fully Adjustable, Ride Height, 40 Damping Settings, compatible with Mazda 3 (BM/BN) 2014-18
Asin: B07J2TB11C
Lowers Vehicle From 30-60 Mm (Lowers May Varies Depneds On Car Chassis, Not Super Low Type Or Match Factory Ride Height).
Shock Damper Can Be Rebuilt Or Replaced When Worn Out, Replacement Parts Are Available.; 12 Months Manufacturer Limited Warranty From Date Of Purchase, Parts Only..
Sae9252 Steel Performance Springs With Upgrade Spring Rate Combined With 40 Ways Shock Damping Settings To Improve Overall Handling And Ride Quality. Cnc Machined Aluminum And Carbon Steel Hardware Accessories; Large Capacity 52Mm Steel Shock Body With Anti-Corrosion Coating Filled With Italian Ip F.A. Made Shock Oil Provides High Viscosity Index To Withstand Intense Track Usage And Outperformance For Everyday Driving Conditions..
Top Mount(Front): Yes, Adjustable Camber Plate With Pillow Ball /// Top Mount(Rear): Yes, Standard Top Mount.
Features
- Compatible With Mazda 3 (BM/BN) 2014 2015 2016 2017 2018; Spring Rate (F/R): 8 kg/mm (448 lbs/inch)/5 kg/mm (280 lbs/inch)
- Top Mount(Front): Yes, Adjustable Camber Plate With Pillow Ball /// Top Mount(Rear): Yes, Standard Top Mount
- Lowers Vehicle From 30-60 mm (lowers may varies depneds on car chassis, NOT SUPER LOW TYPE or Match Factory Ride Height)
- SAE9252 Steel Performance Springs With Upgrade Spring Rate Combined With 40 Ways Shock Damping Settings to Improve Overall Handling And Ride Quality. CNC Machined Aluminum And Carbon Steel Hardware Accessories; Large Capacity 52mm Steel Shock Body With Anti-Corrosion Coating Filled With Italian IP F.A. Made Shock Oil Provides High Viscosity Index To Withstand Intense Track Usage And Outperformance for Everyday Driving Conditions.
- Shock Damper Can Be Rebuilt or Replaced When Worn Out, Replacement Parts Are Available.; 12 Months Manufacturer Limited Warranty From Date Of Purchase, Parts Only.
- See more on Amazon...
Brand: Godspeed | Manufacturer: Godspeed
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #15
Coilover Struts Spring Shocks GDSMOTU Full Set Green Coil Shocks Struts Kits Fit for Mazda for Miata 1990-1997 1999-2005
Asin: B0CKYLP2HC | Model: Adjustable | PartNumber: Adjustable
[Improve Stability] ---- Adjustable Strut Lowers The Car Body When Entering A Corner To Reduce The Centrifugal Force Of The Car; The Lowering Of The Car's Center Of Gravity Is More In Line With The Car's Aerodynamics. It Will Generate A Certain Lifting Force During Driving, Which Can Improve The Vehicle's Handling Performance.
[Satisfactory Service] ---- Before Purchase Gdsmotu Coilover Struts Spring Shocks, Please Enter Vehicle Type + Year + Make + Model + Trim + Body Style + Engine On Top Compatibility. We Will Offer 30-Day Refund, 12-Month Free Replacement Parts Service, Thank You For Your Support.
[Enhance Vehicle Limits] ---- Coilovers Suspension Struts Coil Spring Shocks Struts Can Greatly Reduce The Ground Clearance Of The Vehicle, Thereby Creating A Visual Sense Of Flying Close To The Ground, Greatly Improving The Support Of The Vehicle Body Under Extreme Speed Conditions, And Also Providing Good Lateral Support When Cornering At High Speeds.
[Adjustable Height] ---- Coilover Suspension Has Adjustable Performance. By Changing The Length Of The Shock Absorber Or Adjusting The Preload Of The Spring, The Height Of The Vehicle Can Be Changed In The Front, Rear Or Left And Right, Achieving A More Personalized Suspension System Setting.
Features
- [VEHICLE FITMENT] ---- Coilovers Suspensions Kits fit for Mazda for Miata 1990-1997 1999-2005
- [ADJUSTABLE HEIGHT] ---- Coilover suspension has adjustable performance. By changing the length of the shock absorber or adjusting the preload of the spring, the height of the vehicle can be changed in the front, rear or left and right, achieving a more personalized suspension system setting
- [IMPROVE STABILITY] ---- Adjustable strut lowers the car body when entering a corner to reduce the centrifugal force of the car; the lowering of the car's center of gravity is more in line with the car's aerodynamics. It will generate a certain lifting force during driving, which can improve the vehicle's handling performance
- [ENHANCE VEHICLE LIMITS] ---- Coilovers Suspension Struts Coil Spring Shocks Struts can greatly reduce the ground clearance of the vehicle, thereby creating a visual sense of flying close to the ground, greatly improving the support of the vehicle body under extreme speed conditions, and also providing good lateral support when cornering at high speeds
- [SATISFACTORY SERVICE] ---- Before purchase GDSMOTU Coilover Struts Spring Shocks, please enter Vehicle Type + Year + Make + Model + Trim + Body Style + Engine on top compatibility. We will offer 30-day refund, 12-month free replacement parts service, thank you for your support
- See more on Amazon...
Brand: GDSMOTU | Manufacturer: GDSMOTU
Dimensions: 8.27 x 29.92 x 17.91 Inches | Weight: 38.21 Pounds
See On Amazon #16
ECCPP Coilover Struts fit for Mazda Spring Shocks Assembly Adjustable Strut Shock Suspension Full Set Replacement fit for 1990-2005 for Mazda Miata
Asin: B0741VT645 | Model: 065597-5211-0957331 | PartNumber: 065597-5211-0957331
Spring Rate -2 Piece Front( 8Kg/1), 2 Pieces Rear (6Kg/1).
What You Get- The Coilover Suspensions Kits, High-Quality After-Sales Service And Technical Staff . We Provide One Year Warranty And 100% Quality Assurance. Please Check The Description To Confirm The Compatibility Car Models Before Purchase.
Features Of Coilover Suspensions Kits- Direct Replacement Easy Installation, Bushings Included For A Complete Installation, Saving Time And Labor..
Specifications- Adjustable Height, Adjustable Camber Plate, Non Adjustable Damper.
Features
- APPLICABLE MODELS- The Coilover Struts Spring Shocks fit 1990-2005 for Mazda Miata
- SPECIFICATIONS- Adjustable height, Adjustable camber plate, Non Adjustable Damper
- SPRING RATE -2 piece front( 8kg/1), 2 pieces rear (6kg/1)
- FEATURES OF COILOVER SUSPENSIONS KITS- Direct Replacement Easy Installation, Bushings included for a complete installation, saving time and labor.
- WHAT YOU GET- The Coilover Suspensions Kits, High-quality after-sales service and technical staff . We provide one year warranty and 100% quality assurance. Please check the description to confirm the compatibility car models before purchase
- See more on Amazon...
Brand: ECCPP | Manufacturer: ECCPP
Dimensions: 8.27 x 29.92 x 17.91 Inches | Weight: 38.21 Pounds
See On Amazon #17
NOTUDE Coilovers Struts Suspension Assembly Full Set Fit 1990-1993 for Miata 2door Convertible 1.6L, 1994-1997 1999-2005 for Miata 2door Convertible 1.8L Coils Spring Over Shock Kit (Green, Set of 4)
Asin: B0B126MDCH | Model: 065597-5372-1108132541 | PartNumber: 065597-5372-1108132541
Safety And Comfort: When The Supporting Force Of The Shock Absorber Is Higher, The Body Swing Amplitude Will Be Very Low, The Tires Grounding Performance Is Enhanced, The Tracking Performance Of The Vehicle Is Significantly Improved, And The Drivers Handling Feeling Becomes More Intuitive.
Note: Before Purchase This Parts, Please Check The Compatibility Information Or Call Your Local Dealer To Verify The Correct Oem Part Number. Professional Installation Recommended. 1 Year Warranty.
Improve Steering Performance: Prevent Cornering Understeer And Oversteer, Reduce Cornering Roll. Improve Braking Performance, Reduce Brake Overshoot, Shorten Braking Distance.
Function: This Suspension Coilover Kit Is Designed With Full Adjustable Ride Height Feature Which Retains Full Shock Stroke Length And Spring Preload.
Features
- ADVANTAGE: After long distance driving, the performance of the shock absorber will be degraded. Using a shock absorber with too low damping force will result in reduced driving stability, longer braking distance, and even loss of control of the tire. Our coilover suspension shock absorbers are adjustable in height, enhances handling and more safer to drive
- FUNCTION: This suspension coilover kit is designed with full adjustable ride height feature which retains full shock stroke length and spring preload
- SAFETY AND COMFORT: When the supporting force of the shock absorber is higher, the body swing amplitude will be very low, the tires grounding performance is enhanced, the tracking performance of the vehicle is significantly improved, and the drivers handling feeling becomes more intuitive
- IMPROVE STEERING PERFORMANCE: prevent cornering understeer and oversteer, reduce cornering roll. Improve braking performance, reduce brake overshoot, shorten braking distance
- NOTE: Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number. Professional installation recommended. 1 YEAR WARRANTY
- See more on Amazon...
Brand: NOTUDE | Manufacturer: NOTUDE
Dimensions: 8.27 x 29.92 x 17.91 Inches | Weight: 38.21 Pounds
See On Amazon #18
maXpeedingrods Coilovers for Mazda Miata MX5 MK1 NA 1990-1997, Height Adjustable Coilovers Suspension Kit, Spring Shock Absorber Struts Lowering Kit, Gold
Asin: B01MTBPLEZ | Model: 1270 | PartNumber: 1270
Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
Professional Installation And Special Equipment To Reset Adaptations After Installation Are Required.
Adjustable Ride Height; Adjustable Pre-Load Spring Tension..
Quanity: -2 Front+2 Rear Shocks; -C- Spanner For Adjustment; -Bump Stops And Dust Covers..
Features
- Fit for for Mazda MX5 NA MX-5 MK1 Miata Eunos Roadster 1990-1997
- Quanity: -2 front+2 rear shocks; -C- Spanner for adjustment; -Bump stops and dust covers.
- Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Adjustable ride height; Adjustable pre-load spring tension.
- Professional installation and special equipment to reset adaptations after installation are Required
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 Inches | Weight: 37.65 Pounds
See On Amazon #19
TENKIDOM Carbon Fiber Hood Struts Compatible with Mazda MX-5 Miata NA 1989-1997 Lift Supports Shock Absorber Bonnet Gas Dampers Springs Kit No-Drill Bolt-on
Asin: B0CNX617MC
đăHigh-Quality MaterialăIn Addition To The Classic Aluminum Alloy Lift Supports, We Also Have Upgraded Material Carbon Fiber Lift Supports, Which Are Lightweight And Durable. Unique Design Adds A Touch Of Luxury And Style To Your Car..
đăBest ServiceăWe Provide A 2-Year Quality Warranty And 24-Hour Email Support To Ease Your Concerns..
đăExclusive CustomizationăProvides You With Many Sizes And Styles. If You Have Any Questions Or Production Requirements About The Product, Please Feel Free To Contact Us..
đăEasy To InstallăNo Modification, Drilling Or Cutting Required. Even Amateurs Can Install It Easily..
Features
- Applications Perfectly suitable for the FRONT HOOD of MX-5 Miata NA 1989-1997
- Easy to Install No modification, drilling or cutting required. Even amateurs can install it easily.
- High-quality Material In addition to the classic aluminum alloy lift supports, we also have upgraded material carbon fiber lift supports, which are lightweight and durable. Unique design adds a touch of luxury and style to your car.
- Exclusive customization Provides you with many sizes and styles. If you have any questions or production requirements about the product, please feel free to contact us.
- Best Service We provide a 2-year quality warranty and 24-hour email support to ease your concerns.
- See more on Amazon...
Brand: TENKIDOM | Manufacturer: TENKIDOM
See On Amazon ï»ż
Looking For Something Else?
Search