30 Series Torque Converter Mounting Bolts Predator 212 Engines
Asin: B0842DML4G | Model: TorqueConverterMountingBoltsSTD | PartNumber: TorqueConverterMountingBoltsSTD | Ean: 0683828750762 | UPC: 683828750762
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Used With Popular 30 Series Torque Converter Kits..
Tav 2 Mounting Bolts.
Fits Predator 212 Engines And Others..
Features
- Standard Thread SAE Bolts.
- Fits Predator 212 Engines and others.
- Used with Popular 30 Series Torque Converter Kits.
- Tav 2 Mounting Bolts
- See more on Amazon...
Brand: Kart Supply | Manufacturer: Kart Supply
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon Similar To 30 Series Torque Converter Mounting
#1
212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series
Asin: B07S3TX4C5 | Model: 30 Series | PartNumber: 30 Series
Ean: 0808281948024, 0606314889531, 0808281881949, 0808281535118, 0808281601646, 0808281716371, 0808281867325
UPC: 808281601646, 808281716371, 808281881949, 808281535118, 808281948024, 606314889531, 808281867325
【Bring Your Off-Road Machine To Life】This Tav2 30 Series Go Kart Clutch Kit Fits A 3/4" Shaft And Comes With Your Choice Of A 10 Tooth Sprocket For A 40/41 Chain Or A 12 Tooth Sprocket For A 35 Chain. It Will Work With Small Engines Producing 2-8Hp. 30 Series Asymmetrical Design..
【30 Series Toruqe Converter Belt For 6" Driven】 Length: 70.5Cm / 27.76", Outside Circumference: 27 23/64" , Width Is 3/4".（1.9Cm / 0.75"). Center To Center Of Driver And Driven: 6-15/16 To 7"..
【For Your Convenience This Kit Comes With】1 X 3/4" Driver Pulley;1 X 5/8" Driver Pulley; 1 X Plastic Assy Cover;1 X Aluminum Mounting Plate;1 X Drive Belt; 1 X 10 Tooth Sprocket For #40/41/420 Chain; 1 X 12 Tooth Sprocket For #35 Chain(Chain Not Included); 1 X Full Mounting Hardware..
【A Huge Improvement Over The Old Centrifugal Clutch】This Clutch Will Help You Get More Power Out Of Your Small Engine By Reducing Engine Load. A Torque Converter Acts Similar To A Transmission, Allows Higher Speeds Out Of Your Small Engine, And Smoother Acceleration. On A Lighter Buggy Or Drift Cart Or Mini-Bike This Will Smoke Your Old Centrifugal Clutch..
【Really Wakes Up The Bike】 This 3/4" Torque Converter Is A Direct Replacement Kit For The Most Popular Comet Tav2 Go-Kart Torque-Converter 30 Series. It Fits All Engines With A 3/4" Straight Crankshaft. Diy Modifications To Your Mini Bike Require Some Mechanical Ability. I'm Sure You Can Do It!.
Features
- TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLE DIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
- REALLY WAKES UP THE BIKE This 3/4 Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4 Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
- BRING YOUR OFF-ROAD MACHINE TO LIFE This TAV2 30 Series Go Kart Clutch Kit fits a 3/4 shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
- A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCH This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
- 30 SERIES TORUQE CONVERTER BELT FOR 6 DRIVEN Length: 70.5cm / 27.76, Outside circumference: 27 23/64 , Width is 3/4. 1.9cm / 0.75). Center to Center of driver and driven: 6-15/16 to 7.
- FOR YOUR CONVENIENCE THIS KIT COMES WITH 1 x 3/4 Driver Pulley;1 x 5/8 Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.
- See more on Amazon...
Brand: IPARTS EXPERT | Manufacturer: Coralov-US
Dimensions: 7.48 x 13.78 x 7.87 Inches | Weight: 11.24 pounds
See On Amazon #2
Torque Converter 30 Series Mini Bike 6.5Hp CVT Go Kart Clutch 3/4 inch 10T #40/41/420 & 12T #35 Chain Drive Belt Pulley for Manco Comet TAV2 Mini Bike Engine Replace for 219552A 218353A 219456A
Asin: B0BGL9J4W8
【Belt For 6” Driven】: Center To Center Of Driver And Driven: 6-15/16 To 7”. Length: 27.76”(70.5Cm), Width:3/4”(1.9Cm), Outside Circumference:27-23/64.
【Compatible With】Comet Torque Converter Kits Are Fit For Small Vehicles, Small Tractors, Riding Lawnmowers, Go Karts, Mini Choppers, Mini Bikes, Motorcycles, Atv And Waterski Winches. You Can Adjusted The Engagement Range From 1200Rpm - Maximum 3100 Rpm By Changing Out Springs(Not Included) And Other Adjustments.(The Engagement Range Of This Kit Is Approximately 2350±200 Rpm).
【Package Include】:2 Sprocket Teeth: 10 Tooth Sprocket For #40 #41 #420 Chain And 12 Tooth Sprocket For #35 Chain. Driven Unit: Overall Diameter 6"(5/8" Driven Pulley), Driver Clutch Bore: 3/4". And Also Include Belt, Aluminum Engine Mount Plate, Built In Jackshaft With Sprocket(Chain Not Included), Full Mounting Hardware Kit..
【Premium Materials】Engine Compatibility: 3/4"Shaft With Flat Key, 6.5Hp(212Cc) Horizontal Shaft Gas Engine. It Is Made Of Premium Iron And Aluminum To Make Sure It Can Be Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation 30-75..
Features
- Torque Converter Clutch Kit : SEHNSUCHT 3/4 CVT Torque Converter is designed to replacement for Comet TAV2 Torq-A-Verters 217610A, 219456A, 218353A, 219552A. You can use it on all engines with 3/4 straight crankshaft, and it can also replace for Comet Manco Go Karts.
- Premium Materials Engine Compatibility: 3/4shaft with flat key, 6.5HP(212cc) Horizontal Shaft Gas Engine. It is made of premium iron and aluminum to make sure it can be sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
- Belt for 6 Driven : Center to center of driver and driven: 6-15/16 to 7 . Length: 27.76 (70.5cm), width:3/4 (1.9cm), outside circumference:27-23/64
- Package Include :2 sprocket teeth: 10 tooth sprocket for #40 #41 #420 chain and 12 tooth sprocket for #35 chain. Driven unit: overall diameter 6(5/8 driven pulley), Driver clutch bore: 3/4. And also include belt, aluminum engine mount plate, built in jackshaft with sprocket(Chain not included), full Mounting Hardware Kit.
- Compatible with Comet torque converter kits are fit for small vehicles, small tractors, riding lawnmowers, go karts, mini choppers, mini bikes, motorcycles, ATV and waterski winches. You can adjusted the engagement range from 1200RPM - Maximum 3100 RPM by changing out springs(not included) and other adjustments.(the engagement range of this kit is approximately 2350 200 RPM)
- See more on Amazon...
Brand: SEHNSUCHT | Manufacturer: SEHNSUCHT
See On Amazon #3
212CC 30 Series Torque Converter Go Kart Clutch 3/4" 10T #40 41 420 and 12T #35 Chain for Manco Comet TAV2 218353A
Asin: B0BGXX7VQP | Model: BUTOC001S | PartNumber: BUTOC001S
【Toruqe Converter Belt】Length: 70.5Cm / 27.76", Outside Circumference: 27 23/64" , Width Is 3/4".（1.9Cm / 0.75"). Center To Center Of Driver And Driven: 6-15/16 To 7".
【Full-Set Equipment】Kit Obtains 1 X 3/4" Driver Pulley. 1 X 5/8" Bore Driven Pulley. 1 X Plastic Assy Cover. 1 X Aluminum Mounting Plate. 1 X Driver Belt. 1 X Full Mounting Hardware.
【Excellent Material】Our Go-Kart Torque Converter Is Made Of High-Quality Iron And Aluminum Material, Lightweight, Sturdy, And Durable. It Can Reduce Engine Load And Gain More Power And Save More Effort On Driving Your Car And Can Improve Your Driving Speed.
【2 Sprockets】Comes With Both Sprockets Fits A 3/4" Shaft And Comes With A 10 Tooth Sprocket For A #40/41/420 Chain And A 12 Tooth Sprocket For A #35 Chain (Chain Not Included). It Will Work With Engine Sizes 2Hp-7Hp.
Features
- Replace Part Number Torque Converter Kit Replaces Comet 219552A, 203814A, 219456A, 218352A, 218353A, TAV2 30-75. Fit for Comet Torque Converter, desirable in applications requiring extra rugged driving ability such as small vehicles, riding lawnmowers, boonie bikes, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, LTV's, waterski winches, grounds maintenance appliances, materials handling devices and industrial equipment
- 2 Sprockets Comes with both sprockets fits a 3/4 shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain (Chain not included). It will work with engine sizes 2HP-7HP
- Toruqe Converter Belt Length: 70.5cm / 27.76, Outside circumference: 27 23/64 , Width is 3/4. 1.9cm / 0.75). Center to Center of driver and driven: 6-15/16 to 7
- Excellent Material Our go-kart torque converter is made of high-quality iron and aluminum material, lightweight, sturdy, and durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed
- Full-Set Equipment Kit obtains 1 x 3/4 driver pulley. 1 x 5/8 bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware
- See more on Amazon...
Brand: ILONPA | Manufacturer: ILONPA
Dimensions: 4.00 x 4.00 x 4.00 inches
See On Amazon #4
Complete Torque Converter for Predator 212 Go Kart Clutch Kit Set 3/4inch 10T #40/41 and 12T #35 Chain Replacement for 218353A Manco Comet TAV2
Asin: B07D9BNY91 | Model: GKC0003-AP | PartNumber: GKC0003-AP | Ean: 0680666155223 | UPC: 680666155223
12T Sprocket For #35 Chain And 10T Sprocket For 41/40 Chain Drive Clutch Bore 3/4"(19Mm).
Complete Torque Converter Kits Are Used In Small Vehicles, Riding Lawnmowers, Small Tractors, Go Karts, Mini Bikes, Mini Choppers, Atv, Motorcycles, And Waterski Winches.
Unit Replaces:Comet 218353A, 219552A, 219456A, 217610A, And 203814A Tav2 30-75.
Made Of High Quality Iron And Aluminum Material, Which Is Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation.
Features
- Torque converter for predator 212 - Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key
- Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
- 12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4(19mm)
- Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
- Complete Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- See more on Amazon...
Brand: Voltstorm
Dimensions: 7.48 x 13.39 x 7.48 inches
See On Amazon #5
Spectre Performance 4697 Torque Converter Bolt , Black
Asin: B000BQ08A0 | Model: SPE-4697 | PartNumber: SPE-4697 | Ean: 0099998363891, 0089601469706 | UPC: 089601469706, 099998363891
Lock Nuts Included.
Bolts Are Grade 8, Black Oxide Plated For Corrosion Resistance.
Bolts Are 3/8 Inch - 24 X 5/8 Inch.
Features
- For General Motors TH350, Powerglide and most TH400
- Bolts are 3/8 inch - 24 x 5/8 inch
- Lock nuts included
- Bolts are grade 8, black oxide plated for corrosion resistance
- See more on Amazon...
First Available: 01/06/2014
Brand: Spectre | Manufacturer: Spectre
Dimensions: 1.00 x 6.00 x 4.00 Inches | Weight: 0.18 Pounds
Warranty: 3 Months
See On Amazon #6
MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420
Asin: B07T1KRS4V | Model: 30 Series | PartNumber: 30 Series | Ean: 0824007156788 | UPC: 824007156788
【The Belt Feature】 Length: 70.5Cm / 27.76", Outside Circumference: 27 23/64" , Width Is 3/4".（1.9Cm / 0.75"). Center To Center Of Driver And Driven: 6-15/16 To 7"..
【Go Kart Torque Converter Kit Comes With】1 X 3/4" Driver Pulley;1 X 5/8" Driver Pulley; 1 X Plastic Assy Cover;1 X Aluminum Mounting Plate;1 X Drive Belt; 1 X 10 Tooth Sprocket For #40/41/420 Chain; 1 X 12 Tooth Sprocket For #35 Chain(Chain Not Included); 1 X Full Mounting Hardware. Note This Is Not Made By Comet.
【Special Function】This Clutch Will Help You Get More Power Out Of Your Small Engine By Reducing Engine Load, A Torque Converter Acts Similar To A Transmission, Allows Higher Speeds Out Of Your Small Engine, And Smoother Acceleration..
【For Your Convenience This Kit Comes With Both Sprockets】This Torque Converter Fits A 3/4" Shaft And Comes With A 10 Tooth Sprocket For A #40/41/420 Chain And A 12 Tooth Sprocket For A #35 Chain. It Will Work With Engine Sizes Hp2 To 8Hp. 30 Series Asymmetrical Design. Bring Your Off-Road Machine To Life..
Features
- 30 Series Torque Converter Clutch Kit This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- For your convenience this kit comes with both sprockets This torque converter fits a 3/4 shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
- The Belt Feature Length: 70.5cm / 27.76, Outside circumference: 27 23/64 , Width is 3/4. 1.9cm / 0.75). Center to Center of driver and driven: 6-15/16 to 7.
- Special function This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
- Go Kart Torque Converter Kit comes with 1 x 3/4 Driver Pulley;1 x 5/8 Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware. Note This is not made by Comet
- See more on Amazon...
Brand: MOOSUN | Manufacturer: MOOSUN
Dimensions: 7.48 x 13.78 x 7.87 inches | Weight: 12.30 Pounds
See On Amazon #7
FVRITO Torque Converter Motor Engine Riser Plate for Predator 212cc 196cc 224cc Coleman CT200U BT200X Mini Bike 6.5hp OHV Clone Engine Tillotson Performance Parts
Asin: B0CMZPS9G9 | Model: FV-DZ-168 | PartNumber: FV-DZ-168
【Rust Resistant & Sturdy Motor Riser Plate】：The Engine Riser Plate Is Made Of Premium Metal Material. Durable And Rust Resistant, Strong Solid Base Can Be Used For A Long Time..
【Package】：1 X 30 Series Drive Belt 203589/8959, 1 X F7tc Spark Plug, 2 X Hardware Kits, 1 X Predator 212 Torque Converter Engine Riser Plate. The Belt Is Made Of Excellent Quality Rubber Material,It's Sturdy And Durable In Use. Spark Plug Has Excellent Corrosion Resistance, Which Can Fully Promote Fuel Combustion..
【Easy To Installation】: Came With All The Bolts You Need To Mount It Up. Universal Fit Coleman Rt100 Bt200x Ct200 Mini Bikes. Strong Solid Metal Base Perfect For Mini Bike. Don’T Need To Cut The Frame, Make The Installation A Breeze..
【Upgrade Engine’S Performance】: This Torque Converter Motor Engine Riser Plate Is Essential If You Want To Put A Torque Converter On A Predator 212 Or 196 Engine. This Motor Riser Plate Provides A 1 3/4 Inch Lift, Keep The Engine Up So That The Chain And Torque Converter Mount Go Up Over The Parts Of The Frame That It Might Hit Otherwise. It Effectively Improve The Performance Of The Engine. Giving You The Extra Ground Clearance You Need For Off-Road Adventures. Just Enjoying Your Riding Fun..
Features
- Fitment : The predator 212 engine riser fit for Predator 196cc 212cc 224cc Non hemi, Honda GX160 GX200, DuroMax 7hp ,Tillotson 212, Hisun 196cc,BILT HARD 7HP, Powerhorse 208cc and modified vehicles equipped with one of the above engines, for Coleman CT200U Axis m200 BT200X CT200U-ex Baja Warrior MB200 Massimo MB165 Mega moto 212 Mini Bike Go Kart parts.
- Upgrade Engine s Performance : This torque converter motor engine riser plate is essential if you want to put a torque converter on a predator 212 or 196 engine. this motor riser plate provides a 1 3/4 inch lift, keep the engine up so that the chain and torque converter mount go up over the parts of the frame that it might hit otherwise. It effectively improve the performance of the engine. Giving you the extra ground clearance you need for off-road adventures. Just enjoying your riding fun.
- Rust Resistant & Sturdy Motor Riser Plate The Engine Riser Plate is made of premium metal material. Durable and rust resistant, Strong solid base can be used for a long time.
- Easy to Installation : Came with all the bolts you need to mount it up. Universal fit Coleman RT100 BT200x CT200 mini bikes. Strong solid metal base perfect for mini bike. Don t need to cut the frame, make the installation a breeze.
- Package 1 X 30 series drive belt 203589/8959, 1 X F7TC spark plug, 2 X hardware kits, 1 X Predator 212 Torque Converter Engine Riser Plate. The belt is made of excellent quality rubber material,it's sturdy and durable in use. Spark plug has excellent corrosion resistance, which can fully promote fuel combustion.
- See more on Amazon...
Brand: FVRITO | Manufacturer: FVRITO
Warranty: 30 Days
See On Amazon #8
VEVOR Torque Converter CVT 2HP-7HP 3/4" Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt
Asin: B0BNN4NRFH | Model: VV-TC-1012 VV-TC-10 | PartNumber: VV-TC-1012 VV-TC-10 | Ean: 0840281575022 | UPC: 840281575022
High-Quality Drive Clutch: We Have A 3/4'' Driver Pulley And A 5/8'' Bore Driven Pulley. They Are Made Of Aluminum And Steel. And It Also Can Fit For 4-8 Hp Small Torque Converter Systems..
Complete Accessories: The Torque Converter Clutch Kit Comes With Full Accessories: 1 X 3/4" Driver Pulley. 1 X 5/8" Bore Driven Pulley. 1 X Plastic Assy Cover. 1 X Aluminum Mounting Plate. 1 X Driver Belt. 1 X Full Mounting Hardware..
High Adaptability: Compatible With 3/4" & 5/8" Straight Crankshaft. You Can Usually Use The Torque Converter On 4-8 Hp Go-Karts And Motorbikes..
Updated Durable Belt: The Go-Kart Asymmetrical Belt 669 Is One Of The Highlights For Our Torque Converter For Go-Karts. Using This Excellent Elastic Belt Properly Can Improve The Life Span Of Your Torque Converter..
Features
- TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life. It will surely take your off road adventures to new heights!
- Updated Durable Belt: The go-kart asymmetrical belt 669 is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter.
- High-quality Drive Clutch: We have a 3/4'' Driver Pulley and a 5/8'' bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems.
- High Adaptability: Compatible with 3/4 & 5/8 straight crankshaft. You can usually use the torque converter on 4-8 hp go-karts and motorbikes.
- Complete Accessories: The torque converter clutch kit comes with full accessories: 1 x 3/4 driver pulley. 1 x 5/8 bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #9
FDJ Predator 212CC Torque Converter Kit 30 Series 3/4" Go Kart Mini Bike Comet Clutch Set 3/4" Inch 10T #40 or #41 Chain Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter kit
Asin: B0C3H4C81M | Model: 30 Series | PartNumber: 30 Series | Ean: 0611040615958 | UPC: 611040615958
Unit Replaces: Our Go-Cart Torque Converter Kit Replaces Oem Part Numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, Tav2 30-75, Yelf Dog Drive Unit Q43201w.Replaces For Comet Manco Go Karts..
Complete Kit: Our Kit Comes With Everything You Need For A Hassle-Free Installation, Including 1 X 3/4" Driver Pulley, 1 X 5/8" Driver Pulley, 1 X Plastic Assy Cover, 1 X Aluminum Mounting Plate, 1 X Drive Belt, 1 X 10 Tooth Sprocket For #40/41/420 Chain, 1 X 12 Tooth Sprocket For #35 Chain (Chain Not Included), And 1 X Full Mounting Hardware.".
Perfect Fit: Our 30 Series Torque Converter Belt For 6" Driven Has A Length Of 70.5Cm / 27.76", Outside Circumference Of 27 23/64", And Width Of 3/4" (1.9Cm / 0.75"). Center To Center Of Driver And Driven Is 6-15/16 To 7"..
30 Series Go Kart Clutch Kit: Our Tav2 30 Series Go Kart Clutch Kit Has A 3/4" And A 5/8" Drive Clutch, Suitable For All Engines With 3/4 "Straight Crankshaft.The 3/4" Drive Clutch Comes With Your Choice Of A 10 Tooth Sprocket For A 40/41 Chain Or A 12 Tooth Sprocket For A 35 Chain. Its Asymmetrical Design Reduces Engine Load, Allowing Higher Speeds And Smoother Acceleration. It's A Huge Improvement Over The Old Centrifugal Clutch..
Features
- FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: Our 3/4" Torque Converter is a direct replacement kit for the popular Comet TAV2 go-kart torque-converter 30 series. It's perfect for engines with a 3/4" Straight Crankshaft and produces 2-7hp. DIY modifications to your Mini Bike require some mechanical ability.
- 30 SERIES GO KART CLUTCH KIT: Our TAV2 30 Series Go Kart Clutch Kit has a 3/4 and a 5/8 drive clutch, suitable for all engines with 3/4 straight crankshaft.The 3/4 drive clutch comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. Its asymmetrical design reduces engine load, allowing higher speeds and smoother acceleration. It's a huge improvement over the old centrifugal clutch.
- UNIT REPLACES: Our Go-Cart Torque Converter Kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts.
- Perfect Fit: Our 30 Series Torque Converter Belt for 6 Driven has a length of 70.5cm / 27.76, outside circumference of 27 23/64, and width of 3/4 (1.9cm / 0.75). Center to center of driver and driven is 6-15/16 to 7.
- COMPLETE KIT: Our kit comes with everything you need for a hassle-free installation, including 1 x 3/4 Driver Pulley, 1 x 5/8 Driver Pulley, 1 x Plastic Assy Cover, 1 x Aluminum Mounting Plate, 1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain (Chain not included), and 1 x Full Mounting Hardware.
- See more on Amazon...
Brand: FDJ | Manufacturer: FDJ
Dimensions: 13.00 x 7.00 x 7.00 inches
Warranty: 3 month
See On Amazon #10
30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4" Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589
Asin: B09J4Y3GTP | Model: 30 Series 6.5 HP 212CC 203589 | PartNumber: 30 Series 6.5 HP 212CC 203589 | Ean: 0768564477125 | UPC: 768564477125
【Wide Use--Torque Converter 3/4】: Small Engine Torque Converter Clutches Are Heavily Used In Go Karts, Mini Bikes, And Lawn Mowers.For Go Kart, Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches Etc..
【Wide Use--Go Kart Clutch Belt】:The Go-Kart Drive Belt Used On Most Manco, American Sportworks And Ken-Bar Karts With 5Hp-7Hp Engines.Also Used On The Comet Tav2 Bolt On Torque-A-Verter Kit.Center To Center Spacing For The Driver And Driven Pulley Needs To Be Between 6 5/8 Inch And 6 11/16 Inch..
【Wide Use--Torque Converter 3/4】: Small Engine Torque Converter Clutches Are Heavily Used In Go Karts, Mini Bikes, And Lawn Mowers.For Go Kart, Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches Etc..
【Torque Converter】：This 3/4" Torque Converter Is A Direct Replacement Kit For The Most Popular Comet Tav2 Go-Kart Torque Converter 30 Series..
Features
- 30 Series Torque Converter and Go Kart Drive Belt New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4" Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
- Torque Converter This 3/4 torque converter is a direct replacement kit for the most popular comet TAV2 go-kart torque converter 30 series.
- Wide Use--torque converter 3/4 : Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- Wide Use--torque converter 3/4 : Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- Wide Use--go kart clutch belt :The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
- See more on Amazon...
Brand: YOHIB | Manufacturer: YOHIB OEM
Dimensions: 0.35 x 2.10 x 1.10 inches
See On Amazon #11
CXRCY Torque Converter 3/4" 10T #40 41 420 and 12T #35 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-75 Engine Drive Replacement for Predator 212 Clutch Set,
Asin: B08RJFVH8F | Model: 10CCL12CL | PartNumber: 10CCL12CL
【Full-Set Equipment】This Kart Torque Converter Kit Includes The Main Parts: A 3/4" Driver Pulley And A 5/8" Driven Pulley,And Includes Other Accessories Like Drive Belt,Plastic Assy Cover,Aluminum Mounting Bracket Plate,And Full Mounting Hardware Kit..
【Attention Please!】 If You Use The Engines Of American Brand Or American Standard Shaft Thread (Unf) Such As Honda, Preditor, Or Other Not Metric Standard Thread Shaft, Please Use This Unf Screwes. If You Are Not Sure The Screw Standard, Please Use Your Hand To Install The Longest Black Screwes To Check If It Can Lock The Shaft Very Good, If It Not Workes Good Please Use The White Metric Screws In Other Bag..
【Replacement Part Number】Comet 219552A, 203814A, 219456A, 218352A, 218353A, Tav2 30-75..
【Widely Fitment&With 2 Sprockets】Recommende Predator 212Cc 6.5 Hp Go Kart Torque Converter Clutch All 2Hp-7Hp Engines,3/4" Shaft With Flat Key.You Can Use On Motorcycle,Go Kart ,Mini Vehical And Etc.Includes 1 X 12 Tooth Sprocket For #35 Chain, 1 X 10 Tooth Sprocket For #40/41/420 Chain. It Fits All Engines With A 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
Features
- High Quality Materials Our Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
- Widely Fitment&With 2 Sprockets Recommende predator 212cc 6.5 hp go kart torque converter clutch all 2HP-7HP engines,3/4 Shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Includes 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain. It fits all engines with a 3/4 Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- Full-Set Equipment This kart torque converter kit includes the main parts: a 3/4 driver pulley and a 5/8 driven pulley,and includes other accessories like drive belt,plastic assy cover,aluminum mounting bracket plate,and full mounting hardware kit.
- Replacement part number Comet 219552A, 203814A, 219456A, 218352A, 218353A, TAV2 30-75.
- ATTENTION PLEASE! If you use the engines of American brand or American standard shaft thread (UNF) such as Honda, Preditor, or other not Metric standard thread shaft, please use this UNF screwes. If you are not sure the screw standard, please use your hand to install the longest black screwes to check if it can lock the shaft very good, if it not workes good please use the white metric screws in other bag.
- See more on Amazon...
Brand: CXRCY | Manufacturer: FT
Dimensions: 7.80 x 9.99 x 14.00 inches
See On Amazon #12
FVRITO Super 30 Series Torque Converter Driver Clutch for Predator 212cc 196cc 224cc Ghost 6.5hp Hemi Coleman CT200U BT200X Mini Bike CT200U-EX Baja Warrior Manco KT196 Go Kart Honda Small Engines
Asin: B0CL4L5CG1 | Model: FV-LH-30 | PartNumber: FV-LH-30
Compatity:The 30 Series Driver Performance Parts Fit For All 3/4'' Bore 30 Series Torque Converter Kit And Is Compatible With The Engines Of Higher Rpm,Stage 2 Or Higher..
Note: Don't Run Without Drive Belt.This Kit Doesn't Include The 3/16'' Key.Remeber To Tight The Driver To The Engine .(Using An Impact Gun Is Effective And Reliable).
Package List：1 X 30 Series Torque Converter Driver Clutch, 1 X Drive Belt (203589/8959), 2X Gaskets.
Higher Rpm & Excellent Performance: The 30 Series Driver Has The Advantages Of Quick Acceleration(High Rpm), Smooth & Quiet Engagement(Less Belt Slip), Excellent Power Delivery(More Torque) And Easy Installation. It Improves Geater Than The Stock Driver In Terms Of Performance And Reliability.The 203589/5959 Go Kart Drive Belt Is Made Of High Quality Rubber,Having The Characteristics Of Heat And Corrosion Resistance ,Which Is Sturdy And Durable In Use And Is A Perfect Replacement When You Need..
Features
- Fitment: This super 30 series driver is designed to be used on many Mini Bikes , Go Karts and small clone engines with 3/4" bore shaft . Mini Bikes: Coleman CT200U, BT200X,CT200U-ex, Baja MB165 MB200 (Warrior,Heat, Mini Baja), Massimo MB200, Realtre* RT200, Axi* M200, Trailmaster MB200, Meg* Moto 212. Go Karts: KT196, Yerf Do*, Manco, Murray. Small Clone engines : Predator 212cc 196cc 224cc 225cc 6.5hp hemi ghost, Tillotson 212cc, Bil* Hard 212,Duroma* 7hp 212cc,Hisu* 196cc,Honda GX160 GX200.
- Higher RPM & Excellent Performance: The 30 series driver has the advantages of quick acceleration(high RPM), smooth & quiet engagement(less belt slip), excellent power delivery(more torque) and easy installation. It improves geater than the stock driver in terms of performance and reliability.The 203589/5959 go kart drive belt is made of high quality rubber,having the characteristics of heat and corrosion resistance ,which is sturdy and durable in use and is a perfect replacement when you need.
- Compatity:The 30 series driver performance parts fit for all 3/4'' bore 30 series torque converter kit and is compatible with the engines of higher RPM,stage 2 or higher.
- Package List 1 x 30 series torque converter driver clutch, 1 x drive belt (203589/8959), 2x gaskets
- Note: Don't run without drive belt.This kit doesn't include the 3/16'' key.Remeber to tight the driver to the engine .(using an impact gun is effective and reliable)
- See more on Amazon...
Brand: FVRITO | Manufacturer: FVRITO
Warranty: 90 days
See On Amazon #13
maXpeedingrods Go Kart Forward Reverse Gearbox Kit 212cc for 2HP-13HP Engine 4 Stroke Only Works with 30 Series Torque Converter 3 Shift Modes #35 Chain Go Karts Accessories Go Kart Transmission
Asin: B083FVDF7R | Ean: 6941477713618
▶Complete Accessories-1X Forward / Reverse Gearbox With 3/16" Keyway;2X Mounting Plates;1X Shifter Disc;2X Shifter Cable;1X 10T And 12T Sprocket;1X Shifter Assembly.
▶Three Shift Modes-This Kit Has Three Shift Models: Forward,Reverse And Neutral,Which Is For More Convenient And Easy Operation.Made Of High-Quality Metal,Features With Durable And Lightweight For A Long Use Life.Please Contact Us If You Have Any Questions.
▶Product Use-This Product Was Filled With Oil Before Leaving The Factory,When The Oil Is Used Up,It Needs To Be Filled To Half Of The Box,And This Go-Kart Gearbox Is Use Gl-5 Gear Oil.
▶Standard Adaptation Parameters-Shaft Size: 5/8" With 3/16" Keyway; Gearbox Speed: 5/13 Of The Clutch Speed; Shifter Cable Length: 1540Mm ( 5' ) ( 60'' ).Forward Ratio: 1:1:3,Reverse Ratio: 1:2:6.
Features
- Gearbox Kit 30 Series -This forward reverse gearbox is suitable for go-karts,utility vehicles and other applications with engines up to 14HP and # 35 chain 12T and #40/41/420 chain 10T (Both sprockets included).Please note only use on 30 Series
- Standard Adaptation Parameters-Shaft Size: 5/8 with 3/16 keyway; Gearbox Speed: 5/13 of the Clutch speed; Shifter Cable Length: 1540mm ( 5' ) ( 60'' ).Forward Ratio: 1:1:3,Reverse Ratio: 1:2:6
- Complete Accessories-1x Forward / Reverse Gearbox with 3/16 Keyway;2x Mounting Plates;1x Shifter Disc;2x Shifter Cable;1x 10T and 12T Sprocket;1x Shifter Assembly
- Product Use-This product was filled with oil before leaving the factory,when the oil is used up,it needs to be filled to half of the box,and this go-kart gearbox is use GL-5 gear oil
- Three Shift Modes-This kit has three shift models: forward,reverse and neutral,which is for more convenient and easy operation.Made of high-quality metal,features with durable and lightweight for a long use life.Please contact us if you have any questions
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: Waverspeed
Dimensions: 7.87 x 7.87 x 7.87 inches
See On Amazon #14
Torque Converter Washer and Bolt Kit For 30 Series Drivers Including Metric and Standard Thread bolts & Lock Washer for 3/4 Shaft Engines
Asin: B0B2PTJV4X | Model: YSH-OT001105 | PartNumber: YSH-OT001105 | Ean: 0738712262644 | UPC: 738712262644
30 Series Tav2 Comet Style..
Clutch Not Included..
For 3/4 Shaft Engines..
Package Includes:Metric And Standard Thread Bolts, Custom Washer And Lock Washer..
Features
- Torque Converter Washer and Bolt Kit For 30 Series Drivers.
- Package Includes:Metric and Standard Thread bolts, Custom Washer and Lock Washer.
- 30 Series TAV2 Comet Style.
- For 3/4 Shaft Engines.
- Clutch not included.
- See more on Amazon...
Brand: YSHAP | Manufacturer: YSH
Warranty: No Warning Applicable
See On Amazon #15
Torque Converter Go Kart Clutch Set 1" For 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 (30 Series)
Asin: B08BSYWV5J | Model: MS-LHQ-004 | PartNumber: MS-LHQ-004
Comet Torque Converter Kits Are Used In Small Vehicles, Riding Lawnmowers, Small Tractors, Go Karts, Mini Bikes, Mini Choppers, Atv, Motorcycles, And Waterski Winches.
Driver Clutch Bore: 1"(24.5Mm),Driven Unit: Overall Diameter 6" (5/8" Driven Pulley) ,This Is A Complete Kit That Includes Both Drive And Driven Clutch Pulleys, Belt, Aluminum Engine Mount Plate, Built In Jackshaft With Sprocket, All Mounting Hardware, And Instructions. Includes Both 10T For 40/41 Chain And 12T For 35 Chain.
Comet 30 Series Torque Converter Kit Bolts On To Most Engines With A Horizontal Shaft Including: Briggs, Clinton, Honda And Clones, Kohler, Lifan, Robin, And Tecumseh Motors..
Comet Torque Converter 30 Series Small Engine Belt Drive Pulley Clutch Kit Will Help With More Take Off Power, Smoother Acceleration, Climbing Ability, And Top End Speed By Providing More Torque In The Low End And Higher Speeds In Top End..
Features
- Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
- Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 1(24.5mm),Driven unit: Overall Diameter 6 (5/8 driven pulley) ,This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions. Includes both 10t for 40/41 chain and 12t for 35 chain
- See more on Amazon...
Brand: MOOSUN | Manufacturer: MOOSUN
Dimensions: 6.69 x 12.60 x 7.09 inches | Weight: 11.00 Pounds
See On Amazon #16
BLACKHORSE-RACING 40 Series 1" Bore Go Kart CVT Torque Converter Driver Clutch Fit for Comet 40/44
Asin: B07Q65GYSN | Model: HM0922 | PartNumber: HM0922 | Ean: 6940981501414
▲This 40/44 Series Is Heavily Used In Three Wheelers, Atv's, Ltv's , And Go Karts.
▲Fitment:Go Karts, Three Wheelers Atv / Other Small Off Road Vehicles.
▲Package Includes:1X 40 Series Torque Converter.
▲Replaces Comet 40/44 Series Torq-A-Verter Models And Works With 8-16Hp Engines Within The 1600-3300 Rpm Range..
Features
- 1" Shaft Bore
- Replaces COMET 40/44 Series Torq-A-Verter models and works with 8-16hp engines within the 1600-3300 RPM range.
- This 40/44 Series is heavily used in three wheelers, ATV's, LTV's , and Go karts
- Package Includes:1X 40 SERIES TORQUE CONVERTER
- Fitment:GO KARTS, THREE WHEELERS ATV / OTHER SMALL OFF ROAD VEHICLES
- See more on Amazon...
Brand: BLACKHORSE-RACING | Manufacturer: blackhorseracing
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #17
Predator 212 Torque Converter Kit, Torque Converter for Predator 212, 30 Series Torque Converter Kit for 6.5 HP Go Kart/Mini Bike Torque Converter 3/4
Asin: B08RB2T4ZH | Model: 212CC-001 | PartNumber: 212CC-001 | Ean: 9331460937560
【High Quality】This Predator 212 Torque Converter Kit Is Made Of High Quality Iron Material,Which Is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation. This Torque Converter For Predator 212 Will Help You Get More Power Out Of Your Small Engine By Reducing Engine Load..
【Satisfactory Service】If You Buy Or Use Our Synthetic Winch Rope Kit Have Any Problem, Please No Hesitate To Contact Us, Products Within 3 Months Enjoy Worry-Free Refund Or Replacement Service..
【30 Series Torque Converter】This 30 Series Torque Converter With A 3/4" Bore, Is A Complete Replacement Kit Designed For The Highly Popular Comet Tav2 Go-Kart Torque Converter. It Boasts A 6" Diameter Along With A 3/4" Bore Size And A 3/16" Keyway. These Small Engine Torque Converter Clutches Find Extensive Application In Go-Karts, Mini Bikes, And Lawn Mowers..
【30 Series Go Kart Torque Converter】This 30 Series Go Kart Torque Converter Clutch 3/4" Rreplacement For Go Karts 30 Series Engine Comet Manco. It Features A 3/4" Bore Size And Is Specifically Designed For 6.5Hp 212Cc Engines. The Recommended Engine Range For This Torque Converter Is 2Hp To 8Hp..
Features
- Widely used This predator 212 torque converter clutch kit fits for engines with 3/4" straight crankshaft, widely used in small vehicles, riding lawnmowers, small tractors, go karts, Fun Kart Golf Karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches etc.
- 30 Series go kart torque converter This 30 Series go kart torque converter clutch 3/4 Rreplacement for go karts 30 series engine comet manco. It features a 3/4 bore size and is specifically designed for 6.5hp 212CC engines. The recommended engine range for this torque converter is 2HP to 8HP.
- High Quality This predator 212 torque converter kit is made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. This torque converter for predator 212 will help you get more power out of your small engine by reducing engine load.
- 30 Series torque converter This 30 series torque converter with a 3/4 bore, is a complete replacement kit designed for the highly popular Comet TAV2 go-kart torque converter. It boasts a 6 diameter along with a 3/4 bore size and a 3/16 keyway. These small engine torque converter clutches find extensive application in go-karts, mini bikes, and lawn mowers.
- Satisfactory service If you buy or use our synthetic winch rope kit have any problem, please no hesitate to contact us, products within 3 months enjoy worry-free refund or replacement service.
- See more on Amazon...
Brand: KAKO
See On Amazon #18
JNDO Go Kart 40 Series Torque Converter Kit with 1" Driver Pulley 3/4" Driven Pulley Fit for all 8hp-16hp engines with 1" straight crankshafts and 1/4" keyway for Comet 209133A Manco 2432
Asin: B0CM3D5M2L | Model: F6-00001 | PartNumber: F6-00001
【Easy Installation】Enjoy Hassle-Free Installation With Our Complete Accessories. The Kit Includes Everything You Need To Install The Torque Converter, Simplifying The Modification Process. Furthermore, The Strong And Fracture-Resistant Belt Guarantees A Secure Fit, Allowing For Worry-Free Operation.
By Investing In The Go Kart 40 Series Torque Converter Kit, You'll Experience Enhanced Performance, Wider Compatibility, Superior Durability, And Easy Installation. Upgrade Your Off-Road Machine Today And Enjoy A Higher Speed, Smoother Acceleration, And Increased Power Output.
【Wide Compatibility】 This Torque Converter Can Be Used On All 8Hp-16Hp Engines With A 1" Straight Crankshaft And 1/4" Keyway, Such As Comet 209133 Manco 2432, Predator 420Cc, Honda Gx 340/390, Briggs Straton Vanguard V-Twins. Our Torque Converter Is Trusted By Many Go Kart, Mini Bike, Drift Cart, Scooters, Golf Carts, Atvs.
【Superior Durability】 Crafted From Premium Iron Materials, Our Go Kart 40 Series Torque Converter Is Built To Last. It Boasts Maximum Torque And Wear-Resistance, Ensuring Its Longevity Even Under Demanding Conditions. The Included 1" Drive Clutch, 3/4" Driven Clutch, 10 Tooth Sprocket For #40/41/420 Chain And 12 Tooth Sprocket For #35 Chain Further Enhance Durability And Performance.
Features
- Enhanced Performance Equip the Go Kart 40 Series Torque Converter Kit to upgrade your car's power, designed to reduce engine load and provide smoother acceleration. With a high-speed conversion ratio, this kit efficiently increases higher speeds and improved climbing ability
- Superior Durability Crafted from premium iron materials, our Go Kart 40 Series Torque Converter is built to last. It boasts maximum torque and wear-resistance, ensuring its longevity even under demanding conditions. The included 1 drive clutch, 3/4 driven clutch, 10 tooth sprocket for #40/41/420 chain and 12 tooth sprocket for #35 chain further enhance durability and performance
- Easy Installation Enjoy hassle-free installation with our complete accessories. The kit includes everything you need to install the torque converter, simplifying the modification process. Furthermore, the strong and fracture-resistant belt guarantees a secure fit, allowing for worry-free operation
- Wide Compatibility This torque converter can be used on all 8hp-16hp engines with a 1 straight crankshaft and 1/4 keyway, such as Comet 209133 Manco 2432, Predator 420CC, Honda GX 340/390, Briggs Straton Vanguard V-Twins. Our torque converter is trusted by many go kart, mini bike, drift cart, scooters, golf carts, ATVs
- By investing in the Go Kart 40 Series Torque Converter Kit, you'll experience enhanced performance, wider compatibility, superior durability, and easy installation. Upgrade your off-road machine today and enjoy a higher speed, smoother acceleration, and increased power output
- See more on Amazon...
Brand: JNDO | Manufacturer: Vital All-Terrain
Warranty: 1 year warranty
See On Amazon #19
QYMOTO 40/41/420 Chain Sprocket 10 Tooth 5/8'' Bore 3/16'' Keyway for Coleman KT196,Hammerhead Mudhead 80T, Go Kart Sprocket 30 Series Torque Converters (No mounting Bolt and Washer)
Asin: B0BK9YPX8M | Model: KT196 Chain Sprocket 001 | PartNumber: KT196 Chain Sprocket 001
This Sprocket Is A Direct Replacement For The Small Sprocket Used On The Jackshaft And Final Drive Systems Of A Hammerhead 163Cc 80T And 208Cc Mudhead..
Condition：100% Brand New.
Package Include:1*Go Kart Jackshaft Sprocket,1* Sprocket Key,1 Set *Mounting Bolt And Washer(As Pictured).
This Jackshaft Sprocket Have 10 Tooth Is Used With Size #40, #41, And 420 Chain Found On 20 & 30 Series Torque Converters..
Features
- FITMENT: Fit for Coleman Powersports Off Road Go Kart ,Gas Powered, 196cc/6.5hp KT196 model and more
- This jackshaft sprocket have 10 tooth is used with size #40, #41, and 420 chain found on 20 & 30 Series torque converters.
- This sprocket is a direct replacement for the small sprocket used on the jackshaft and final drive systems of a Hammerhead 163cc 80T and 208cc Mudhead.
- PACKAGE INCLUDE:1*Go Kart Jackshaft Sprocket,1* Sprocket Key,1 set *mounting bolt and washer(as pictured)
- CONDITION 100% Brand New
- See more on Amazon...
Brand: QYMOTO | Manufacturer: QYMOTO
See On Amazon #20
BATONECO 30 series torque converter Kit for Predator 212CC 6.5 HP 3/4" Bore Clutch 10T #40/41/420 and 12T #35 Chain Replaces Go Kart Mini Bike Comet TAV2 30-75 Manco
Asin: B09YQHS2JJ | Model: Comet TAV2 3/4 Inch 30-75 Manco | PartNumber: Comet TAV2 3/4 Inch 30-75 Manco
✅【Size】Outside Circumference: 27 23/64", Width Is 3/4".(1.9Cm / 0.75"),Center To Center Of Driver And Driven: 6-15/16 To 7"..
✅【Package Includes】 1X Drive Belt, 1X Plastic Assy Cover, 1 X 3/4" Driver Pulley, 1 X 5/8" Driven Pulley, 1X Aluminum Mounting Bracket Plate, 1 X 12 Tooth Sprocket For #35 Chain, 1 X 10 Tooth Sprocket For ##40/41/420 Chain(Chain Not Included), 1X Full Mounting Hardware Kit.
✅【High Quality】 This 3/4" Torque Converter Kit Is Made Of High Quality Iron And Aluminum, Which Is Sturdy And Durable. Help You Get More Power Out Of Your Small Engine By Reducing Engine Load And Smoother Acceleration..
✅【Engine Compatability】Fit All Engines With A 3/4 Inch Straight Crankshaft,Work With Small Engines Producing 2-8Hp. Suitable For Go Karts 30 Series.
Features
- Replace Part Number :Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75, Yelf Dog Drive Unit Q43201W
- Engine Compatability Fit all engines with a 3/4 inch straight crankshaft,work with small engines producing 2-8hp. Suitable for Go Karts 30 Series
- Size Outside circumference: 27 23/64, Width is 3/4.(1.9cm / 0.75),Center to Center of driver and driven: 6-15/16 to 7.
- High Quality This 3/4 Torque Converter kit is made of high quality iron and aluminum, which is sturdy and durable. Help you get more power out of your small engine by reducing engine load and smoother acceleration.
- Package Includes 1X Drive belt, 1X Plastic Assy Cover, 1 x 3/4 Driver pulley, 1 x 5/8 driven pulley, 1X Aluminum Mounting Bracket Plate, 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for ##40/41/420 Chain(Chain not included), 1X Full Mounting hardware Kit
- See more on Amazon...
Brand: BATONECO | Manufacturer: BATONECO
See On Amazon
Looking For Something Else?
Search