Taytools 773772 4 Piece Set 24 Inches Long Vertical Uprights 5/32 Inches Thick for High Load Lumber Wood Rack Shelf System 300 Pound Capacity
Asin: B084BNRD34 | Model: 773772 | PartNumber: 773772 | Ean: 0796029773772 | UPC: 796029773772
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Lumber Storage System Will Provide A Higher Load Alternative Than Traditional Shelf Systems.
The 5/32" Thick Steel Components Allow Each Vertical Bar To Carry A Maximum Weight Up To 300 Pounds.
These Vertical Bars Can Be Joined Up To 6 Feet Against The Floor For Vertical Storage Capacity.
Also Available Are Sets Of 12” And 18” Horizontal Brackets.
Features
- This 4 piece set of 24 long vertical uprights are part of a high load lumber storage system
- Also available are sets of 12 and 18 horizontal brackets
- This lumber storage system will provide a higher load alternative than traditional shelf systems
- These vertical bars can be joined up to 6 feet against the floor for vertical storage capacity
- The 5/32 thick steel components allow each vertical bar to carry a maximum weight up to 300 pounds
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon Similar To Taytools 773772 4 Piece Set
#1
Taytools 12 Piece Set Glass Reinforced Nylon Clamping Assembly Set Contains Sizes 2 x 3-1/8 , 4 x 4 and 6 x 6 Guaranteed Square Within +/- 0.002
Asin: B0BDVYYS4J | Model: 12 piece set | PartNumber: 12 piece set
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Set Contains 4 Each Of The Following Sizes: 2-Inch X 3-1/8-Inch, 4-Inch X 4-Inch And 6-Inch X 6-Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Set contains 4 each of the following sizes: 2-inch x 3-1/8-inch, 4-inch x 4-inch and 6-inch x 6-inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 6.00 x 9.00 x 11.00 Inches
See On Amazon #2
Taytools 106391 4 Piece Set 6 x 6 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVSTKCJ | Model: 106391 | PartNumber: 106391
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 6-Inch X 6-Inch. Leg Thickness Is 0.950 Inch And Leg Width Is 0.1.380 Inch.
.
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 6-inch x 6-inch. Leg thickness is 0.950 inch and leg width is 0.1.380 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.95 x 6.00 x 6.00 inches
See On Amazon #3
Taytools 776629 4 Piece Set of Solid Machinist Squares, 2-3/4, 3-3/4 , 4-3/4 and 6-3/4 inch Accurate to 0.001
Asin: B092RLD3WP
Each Square Is Made From 2 Pieces Of Tool Steel. The Bases And Blades Are Riveted Together With 2 Pins Producing A Strong And Invisible Joint..
Each Square Guaranteed To Be Accurate To 0.001" Over The Length Of The Blade. Comes In A Hinged Plastic Case..
All Faces And Edges Are Ground And Lapped For Straightness And Parallelism..
The Set Include The Following Squares: 2-3/4 Inch, 3-3/4 Inch, 4-3/4 Inch And 6-3/4 Inch..
Features
- This is a 4-piece set of precision machinist squares and are perfect for the professional machinist, meticulous wood worker, or DIY perfectionist
- The set include the following squares: 2-3/4 inch, 3-3/4 inch, 4-3/4 inch and 6-3/4 inch.
- Each square is made from 2 pieces of tool steel. The bases and blades are riveted together with 2 pins producing a strong and invisible joint.
- All faces and edges are ground and lapped for straightness and parallelism.
- Each square guaranteed to be accurate to 0.001 over the length of the blade. Comes in a hinged plastic case.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #4
Taytools 106392 4 Piece Set 8 x 8 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVWZ2N4 | Model: 106392 | PartNumber: 106392
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 8-Inch X 8-Inch. Leg Thickness Is 1.130 Inch And Leg Width Is 0.1.570 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 8-inch x 8-inch. Leg thickness is 1.130 inch and leg width is 0.1.570 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.13 x 8.00 x 8.00 Inches
See On Amazon #5
Taytools 106390 4 Piece Set 4 x 4 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVVLRH2 | Model: 106390 | PartNumber: 106390
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 4-Inch X 4 Inch. Leg Thickness Is 0.600 Inch And Leg Width Is 0.940 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 4-inch x 4 inch. Leg thickness is 0.600 inch and leg width is 0.940 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.60 x 4.00 x 4.00 inches
See On Amazon #6
Taytools 106389 4 Piece Set 2 x 3-1/8 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVV8RJG | Model: 106389 | PartNumber: 106389
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 2-Inch X 3-1/8 Inch. Leg Thickness Is 0.500 Inch And Leg Width Is 0.700 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 2-inch x 3-1/8 inch. Leg thickness is 0.500 inch and leg width is 0.700 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.50 x 2.00 x 3.13 inches
See On Amazon
Looking For Something Else?
Search