Upgrade Version Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill
Asin: B085B1FF9T | Ean: 0028753390421 | UPC: 028753390421
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Air Flow And Spray Mist Volume Adjustable Design, Easier To Use..
Save 60-80% Lubricants Compared With The Oldest Lubrication Tube. Flexible Pipe Length: 1.5M / 4.92Ft; Flexible Pipe Diameter: 4Mm / 0.16In.
Great For Cnc Lathe Milling Drill Machine. Usually Used In Lathe, Milling, Grinding, Drilling, Boring, And Tapping Processing..
In The Liquid Without Pressure Output Required To Ensure That The Air Pressure In The Range 5-7Kgf / Cm2 (Atomization And Gas, Associated Gas Pressure).
Features
- Stainless steel flexible pipe is more resistant to high temperatures.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure)
- Air flow and spray mist volume adjustable design, easier to use.
- Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
- Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft; Flexible Pipe Diameter: 4mm / 0.16in
- See more on Amazon...
Brand: YWY | Manufacturer: YWY
Dimensions: 1.57 x 5.91 x 3.54 inches
See On Amazon Similar To Upgrade Version Mist Coolant Lubrication
#1
OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
Asin: B071DXGGP4 | Model: 130103020Q | PartNumber: 130103020Q | Ean: 4895192450650
√ Save Time - Not Only Increases The Machining Cutting Speed, Save Time And Reduce Processing Costs And Tool Wear..
√ Widely Used - In The Liquid Without Pressure Output Required To Ensure That The Air Pressure In The Range 5-7Kgf / Cm2..
√ Easy To Use - Air Flow And Spray Mist Volume Adjustable Design, Easier To Use..
√ Working Safer - Gas Processing Chips Are Blown Away, Working Safer; A Lot Of Water Problem Solving Tools, Easier To Clean Up..
Features
- Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- Working Safer - Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up.
- Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- Easy To Use - Air flow and spray mist volume adjustable design, easier to use.
- Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Weight: 0.40 Pounds
See On Amazon #2
Hy-Per Lube HPC100-3PK High Performance Super Coolant - 16 oz, (Pack of 3)
Asin: B07F13298S | Model: HPC100-3PK | PartNumber: HPC100-3PK
Prevents Overheating In High Performance And High Load Engines.
Compatible With All Types Of Antifreeze, Does Not Contain Ethylene Glycol.
Complete Protection From Rust, Corrosion And Electrolysis.
Allows Safe Advancement Of Ignition Timing Resulting In More Horsepower.
Features
- Reduces Engine Cylinder Heat Temperatures
- Allows Safe Advancement of Ignition Timing Resulting in More Horsepower
- Prevents Overheating in High Performance and High Load Engines
- Complete Protection from Rust, Corrosion and Electrolysis
- Compatible With All Types of Antifreeze, does not contain ethylene glycol
- See more on Amazon...
First Available: 06/22/2018
Brand: Hy-Per Lube | Manufacturer: Hy-Per Lube
Weight: 1.00 pounds
Warranty: See manufacturer
See On Amazon #3
BACHIN Upgrade Version Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
Asin: B07X89Z1W9 | Ean: 0028753389685 | UPC: 028753389685
Widely Used - In The Liquid Without Pressure Output Required To Ensure That The Air Pressure In The Range 5-7Kgf / Cm2..
Even The Super-Hard Alloy Precision Machining The Workpiece Can Achieve A Smooth Surface.
Not Only Increases The Machining Cutting Speed, Save Time And Reduce Processing Costs And Tool Wear.
Gas Processing Chips Are Blown Away, Working Safer; A Lot Of Water Problem Solving Tools, Easier To Clean Up.
Features
- The nebulizer gas and coolant is adjustable, easy to use on different processing conditions
- Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up
- Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
- Not only increases the machining cutting speed, save time and reduce processing costs and tool wear
- Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
- See more on Amazon...
Brand: BACHIN | Manufacturer: BACHIN
Dimensions: 1.57 x 5.91 x 3.54 inches | Weight: 0.44 pounds
See On Amazon #4
Mist Coolant for Metal Cutting Applications | Fusion Cool 2255 | Premium Synthetic Metalworking Fluid (1 Gallon)
Asin: B0BXFSSL7H | Ean: 0860008523655 | UPC: 860008523655
Excellent Service In Most General-Purpose Flood Cooling Applications, Such As A Saw Coolant Or Cnc Mister. Direct Cross-Over/ Replacement For Kool Mist 77..
This Coolant Is Formulated With Biocides To Extend Sump Life And Effectively Reject Tramp Oil, And It Will Inhibit Corrosion With Dilutions As Low As 3%. Additionally, It Is A Safe And Mild Machine Coolant..
Common Applications Include Cnc Plasma Table, Bandsaws, Grinding, Milling, Turning, Drilling, And Other Cutting Operations..
It Is Particularly Useful Where Tool Pressure Is Exceptionally Great Or Where The Material Is Very Abrasive. Fusion Cool 2255 Provides The Extra Lubrication Needed To Protect The Cutting Edge Of The Tool..
Features
- This mist coolant is highly recommended for mist cooling any metal or alloy where tougher machining conditions require greater lubricity.
- It is particularly useful where tool pressure is exceptionally great or where the material is very abrasive. Fusion Cool 2255 provides the extra lubrication needed to protect the cutting edge of the tool.
- Excellent service in most general-purpose flood cooling applications, such as a saw coolant or CNC mister. Direct cross-over/ replacement for Kool Mist 77.
- Common applications include CNC plasma table, bandsaws, grinding, milling, turning, drilling, and other cutting operations.
- This coolant is formulated with biocides to extend sump life and effectively reject tramp oil, and it will inhibit corrosion with dilutions as low as 3%. Additionally, it is a safe and mild machine coolant.
- See more on Amazon...
Brand: Fusion Chemical | Manufacturer: Fusion Chemical
See On Amazon #5
ChgImposs Mist Coolant Mist Lubrication System Unit, Metal Cutting Engraving Cooling Sprayer Machine with Air Pipe for CNC Lathe Milling Drill Machine
Asin: B07JVKBS4V | Model: EPC_MAC_00H | PartNumber: EPC_MAC_00H | Ean: 4895192455969
Can Save The Cooling Liquid In The Range Of 80%, Good Cooling Effect. Can Decrease The Liquid Waste Which Influence The Circumstance..
Great For Cnc Lathe Milling Drill Machine. Usually Used In Lathe, Milling, Grinding, Drilling, Boring, And Tapping Processing..
In The Liquid Without Pressure Output Required To Ensure That The Air Pressure In The Range 5-7Kgf / Cm2..
Extend The Live Of The Machine, Update The Precision Of Processing. Decrease The Fee Of The Operation And Effect Of Process..
Features
- Whole Length: 350mm / 13.78in; Cardan Joint Diameter: 5mm / 0.2in
- Extend the live of the machine, update the precision of processing. Decrease the fee of the operation and effect of process.
- Can save the cooling liquid in the range of 80%, good cooling effect. Can decrease the liquid waste which influence the circumstance.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
- Great for CNC lathe milling drill machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
See On Amazon #6
YWY Upgrade Version Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
Asin: B085B11L6T | Ean: 0028753390438 | UPC: 028753390438
Widely Used - In The Liquid Without Pressure Output Required To Ensure That The Air Pressure In The Range 5-7Kgf / Cm2 ...
Even The Super-Hard Alloy Precision Machining The Workpiece Can Achieve A Smooth Surface ..
Not Only Increases The Machining Cutting Speed, Save Time And Reduce Processing Costs And Tool Wear ..
Gas Processing Chips Are Blown Away, Working Safer; A Lot Of Water Problem Solving Tools, Easier To Clean Up ..
Features
- The nebulizer gas and coolant is adjustable, easy to use on different processing conditions .
- Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up .
- Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 ..
- Not only increases the machining cutting speed, save time and reduce processing costs and tool wear .
- Even the super-hard alloy precision machining the workpiece can achieve a smooth surface .
- See more on Amazon...
Brand: YWY | Manufacturer: YWY
Dimensions: 1.57 x 5.91 x 3.54 Inches | Weight: 0.44 Pounds
See On Amazon #7
Cutting Cooling Mist Coolant Lubrication Spray System Sprayer Metal Hose for Metal CNC Router Cutting Engraving Lathe Milling Machine
Asin: B0773LG1F9 | Model: WD-000012 | PartNumber: WD-000012 | Ean: 0785004503718, 0680904985209 | UPC: 680904985209, 785004503718
Gas Processing Debris Was Blown Away, Processing More Secure..
Metal Hose, Long Life..
The Spray Coolant Gas And Cooling Liquid Is Adjustable, Easy To Use On Different Processing Conditions..
Cooling The Processing Solution Can Save More Than 80%, The Cooling Effect Is No Less Than The Conventional Water-Cooled..
Features
- This product has obtained the national patent, widely used in CNC lathe, general lathe, drilling machine, tapping machine, grinding machine, tool grinding machine, NC, CNC machine, punching machine, sawing machine, milling machine
- Cooling the processing solution can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- Gas processing debris was blown away, processing more secure.
- The spray coolant gas and cooling liquid is adjustable, easy to use on different processing conditions.
- Metal hose, long life.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: DX
Weight: 0.93 pounds
See On Amazon #8
OriGlam Mist Coolant Mist Lubrication, Spray System Unit Used for CNC Lathe Milling Drill Machine
Asin: B06XB8BGDL | Model: 13010300GQ | PartNumber: 13010300GQ | Ean: 4895192448770
√ Easy Operation - Engraving Machine Spray Cooling,Special Design,Direction Of Rotation,Easy To Operate..
√ Widely Used - Great For Cnc Lathe Milling Drill Machine. Usually Used In Lathe, Milling, Grinding, Drilling, Boring, And Tapping Processing..
√ Long-Term Use - Standard Fixing Device,Fine Spray Port, Long Life. Cooling Stone/Metal/Ceramic Tile Engraving Machine..
√ Great Value - Save 60-80% Lubricants Compared With The Oldest Lubrication Tube..
Features
- Multi-function - Set multi function all in one,cooling,lubrication and blowing the metal chips, gas processing chips are blown away, working safer.
- Great Value - Save 60-80% lubricants compared with the oldest lubrication tube.
- Easy Operation - Engraving machine spray cooling,Special design,direction of rotation,easy to operate.
- Long-term Use - Standard fixing device,fine spray port, long life. Cooling stone/metal/ceramic tile engraving machine.
- Widely Used - Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 1.18 x 7.09 x 1.18 inches | Weight: 0.33 pounds
See On Amazon #9
2Pcs Mist Coolant Lubrication Spray System, for 8mm Air Pipe CNC Lathe Milling Drill A for The Liquid That Requires No Pressure Output
Asin: B08QZ6N264 | Model: LiebeWHec2m3r5a8o | PartNumber: LiebeWHec2m3r5a8o | Ean: 9134814547886
Advantage: The Mist Coolant Lubrication Spray System Can Save More Than 80% Of Cooling Liquid, And The Cooling Effect Is No Less Than Traditional Water Cooling..
Quality Assurance: The Mist Coolant System Is Manufactured Under Strict Quality Control And Standard Requirements, And Has A High Safety Factor, So It Can Be Used With Confidence..
Application: The 8Mm Air Pipe Sprayer Widely Used In The Liquid That Requires No Pressure Output, Make Sure That The Air Pressure Is Within The Range Of 5‑7Kgf / Cm2..
Easy To Use: The Coolant Lubrication Sprayer Can Blow Away The Gas Treatment Chips, Work More Safely, Many Water Problem Solving Tools, Easier To Clean..
Features
- EFFICIENT: The mini coolant lubrication sprayer not only improves the machining cutting speed, saves time, but also reduces the machining cost and tool wear.
- EASY TO USE: The coolant lubrication sprayer can blow away the gas treatment chips, work more safely, many water problem solving tools, easier to clean.
- ADVANTAGE: The mist coolant lubrication spray system can save more than 80% of cooling liquid, and the cooling effect is no less than traditional water cooling.
- APPLICATION: The 8mm air pipe sprayer widely used in the liquid that requires no pressure output, make sure that the air pressure is within the range of 5 7KGF / CM2.
- QUALITY ASSURANCE: The mist coolant system is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence.
- See more on Amazon...
Brand: LiebeWH | Manufacturer: LiebeWH
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.38 pounds
See On Amazon #10
ChgImposs Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill
Asin: B07HT1Y4BK | Ean: 4895192455631
Air Flow And Spray Mist Volume Adjustable Design, Easier To Use..
Great For Cnc Lathe Milling Drill Machine. Usually Used In Lathe, Milling, Grinding, Drilling, Boring, And Tapping Processing..
In The Liquid Without Pressure Output Required To Ensure That The Air Pressure In The Range 5-7Kgf / Cm2 (Atomization And Gas, Associated Gas Pressure).
Stainless Steel Flexible Pipe Is More Resistant To High Temperatures..
Features
- Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft; Flexible Pipe Diameter: 4mm / 0.16in
- Stainless steel flexible pipe is more resistant to high temperatures.
- Air flow and spray mist volume adjustable design, easier to use.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure)
- Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
Weight: 0.71 pounds
See On Amazon #11
SST LUBE-CUBE Fogless Coolant Sprayer System
Asin: B0B621FMD6 | Ean: 0600139430671 | UPC: 600139430671
Complete Kit Includes Everything Needed To Set Up Targeted Lubrication For Milling, Drilling, Grinding, Tapping, Sawing, And Lathe Operations, Metal Forming, Rolling, Stamping.
Fully Pressurized System For Delivers A Reliable, Uninterrupted Continuous Flow Of Coolant To The Work Piece. It’S Instant On And Off Response, And Ease Of Adjustment, Make It A Real Time Saver..
Compatible With Most Coolants Including Trim Mist, Koolmist 77, Neatsfoot Oil, Wd-40, And Water Based Coolants. Not Compatible With Ipa.
Extremely Tight Coolant Spread Injects Coolant Deep Into Pockets And Holes, While Also Clears Chips From Cutter And Workpiece - Resulting In Higher Cutting Speeds, Increased Tool Life, And Improved Cut Quality.
Extra High Resolution Knob Provides Fine Control Over Coolant-To-Air Mixture Ratio And Is Compatible With Most Coolant Types And Oils.
Features
- The SST LUBECUBE Low-pressure high volume fogless sprayer delivers a precisely targeted spray to the cutter and work piece without fine atomizing of coolants, eliminating toxic coolant mists or fogs that carry into the surrounding air, also reducing coolant waste.
- Extra high resolution knob provides fine control over coolant-to-air mixture ratio and is compatible with most coolant types and oils
- Complete kit includes EVERYTHING needed to set up targeted lubrication for milling, drilling, grinding, tapping, sawing, and lathe operations, metal forming, rolling, stamping
- Extremely tight coolant spread injects Coolant Deep Into Pockets and Holes, while also Clears Chips from Cutter and Workpiece - resulting in Higher Cutting Speeds, Increased Tool Life, and improved cut quality
- Fully Pressurized System for Delivers a reliable, uninterrupted continuous flow of coolant to the work piece. It s instant on and off response, and ease of adjustment, make it a real time saver.
- Compatible with most Coolants including Trim MIST, Koolmist 77, Neatsfoot oil, WD-40, and water based coolants. NOT Compatible with IPA
- See more on Amazon...
Brand: Stupid Simple Tools | Manufacturer: SST
See On Amazon #12
Garosa Mist Coolant Lubrication Spray System, for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill with Flexible Pipe(STR-01)
Asin: B08LD2MQ47
The Air Volume And Coolant Of The Sprayer Can Be Adjusted To Facilitate The Use Of Different Processing Conditions..
Such Cnc Cooling System Is Suitable For Specular Machine, Accuracy Engraving Machine, Lathe, Drilling Machine, Milling Machine, Grinder, Machine Tool, Cnc Machine Tool, Woodworking Machinery, Etc..
After Many Inspections Before Leaving The Factory, The Lathe Cooler's Quality Is Guaranteed, You Can Use It With Confidence..
Coolant Can Save More Than 80% During The Process, And The Cooling Effect Is No Less Than Traditional Water Cooling..
Features
- STR-01 sprayer solves the problem of large amount of water in the machine and it is easier to clean.
- Coolant can save more than 80% during the process, and the cooling effect is no less than traditional water cooling.
- The air volume and coolant of the sprayer can be adjusted to facilitate the use of different processing conditions.
- After many inspections before leaving the factory, the lathe cooler's quality is guaranteed, you can use it with confidence.
- Such CNC cooling system is suitable for Specular machine, accuracy engraving machine, lathe, drilling machine, milling machine, grinder, machine tool, CNC machine tool, woodworking machinery, etc.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #13
Kool Mist coolant System for Mill CNC Cooler fractional Lubrication Router Cooling Mini Lathe Lubricant Nozzle Spray origm lube,Power Tools Coolant Lubricant Sprayer Spray
Asin: B0C3Y7J3T7 | Model: Tbest80dbfaun9p | PartNumber: Tbest80dbfaun9p
The Coolant Sprayer Can Increase Sealing, Avoid Leakage And Prolong Hine Service Life, Easy To Use And ..
【Good Performance】Our Products Can Save The Cooling Liquid, Can Control The Acity Of The Sprayer And Coolant, High Quality In The Cooling Effect. Cooling, Lubricating And Chip Blowing Can Be Completed At One Time During Processing To Improve Processing Efficiency And Save Time..
【High Efficiency】Cooling, Lubricating And Chip Blowing Can Be Completed At One Time During Processing, Increasing The Hining Cutting Speed, Save Time And Reduce Processing Costs And Tool Wear..
Cooling, Lubricating And Chip Blowing Can Be Completed At One Time During Processing To Improve Processing Efficiency And Save Time..
Features
- Make sure this fits by entering your model number.
- Cooling, lubricating and chip blowing can be completed at one time during processing to improve processing efficiency and save time.
- The coolant sprayer can increase sealing, avoid leakage and prolong hine service life, easy to use and .
- High Efficiency Cooling, lubricating and chip blowing can be completed at one time during processing, increasing the hining cutting speed, save time and reduce processing costs and tool wear.
- Good Performance Our products can save the cooling liquid, can control the acity of the sprayer and coolant, high quality in the cooling effect. Cooling, lubricating and chip blowing can be completed at one time during processing to improve processing efficiency and save time.
- See more on Amazon...
Brand: Tbest | Manufacturer: Tbest
See On Amazon #14
Mist Coolant Lubrication Spray System Aluminium Alloy Plastic for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill 0-68cst Use Liquid Viscosity Range
Asin: B08GM7HTST | Ean: 8757737465054
【Application】The Mist Coolant Lubrication Spray System Is Suitable For Cooling And Lubrication Of Lathes, Milling Machines, Grinding Machines, Tapping Machines, Grinding Equipment, Cnc Machining Centers, Sawing Machines, Woodworking Equipment, Feeders And Other Equipment..
【Long Service Time】The Coolant Sprayer Can Increase Sealing, Avoid Leakage And Prolong Machine Service Life, Easy To Use And Clean, Nebulizer Gas And Coolant Is Adjustable, Easy To Use On Different Processing Conditions..
【Save Cooling Liquid】The Mist Coolant Lubrication Spray System Can Save The Cooling Liquid, Can Control The Capacity Of The Sprayer And Coolant, High Quality In The Cooling Effect..
【High Quality Material】The Mist Coolant Lubrication Spray System Can Be Used To Process Alloys Or Superhard Materials, Super-Hard Alloy Precision Machining The Workpiece, Also Ensure Smooth And Highprecision Processing Surfaces..
Features
- High Efficiency Cooling, lubricating and chip blowing can be completed at one time during processing, increasing the machining cutting speed, save time and reduce processing costs and tool wear.
- High Quality Material The mist coolant lubrication spray system can be used to process alloys or superhard materials, super-hard alloy precision machining the workpiece, also ensure smooth and highprecision processing surfaces.
- Application The mist coolant lubrication spray system is suitable for cooling and lubrication of lathes, milling machines, grinding machines, tapping machines, grinding equipment, CNC machining centers, sawing machines, woodworking equipment, feeders and other equipment.
- Save Cooling Liquid The mist coolant lubrication spray system can save the cooling liquid, can control the capacity of the sprayer and coolant, high quality in the cooling effect.
- Long Service Time The coolant sprayer can increase sealing, avoid leakage and prolong machine service life, easy to use and clean, nebulizer gas and coolant is adjustable, easy to use on different processing conditions.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.22 pounds
See On Amazon #15
MEELYHOME Cooling System Mist Coolant Lubrication Spray System Spray Lathe Grinder Accessory Lubrication Spray System
Asin: B0D4TLZXJ2 | Ean: 7626937527040
Our Spray Solves The Problem Of Large Amount Of Water In The Machine And It Is Easier To Clean..
Mist Coolant Lubrication Spray System Equipped With Metal Hoses, It Is To Use..
Lubrication Spray System Is Great For Lathe Milling Drill Machine. Usually Used In Lathe, Milling, Grinding, Drilling, Boring, And Tapping Processing..
Coolant Can Save More Than 80% During The Process, And The Cooling Effect Is No Less Than Traditional Water Cooling..
Features
- The air and coolant of the spray can be adjusted to facilitate the use of different processing conditions.
- Coolant can save more than 80% during the process, and the cooling effect is no less than traditional water cooling.
- Our spray solves the problem of large amount of water in the machine and it is easier to clean.
- Lubrication spray system is great for lathe milling drill machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
- Mist coolant lubrication spray system equipped with metal hoses, it is to use.
- See more on Amazon...
Brand: MEELYHOME | Manufacturer: hwdjiSW
See On Amazon #16
Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe 118in Tube zg
Asin: B0D4DZPNW7 | Model: ICRPSTUstq0o7d9ye | PartNumber: ICRPSTUstq0o7d9ye
Use The Liquid Viscosity At 68Cst Or Less..
Material: Plastic+Metal+Brass.
Save 60‑80% Lubricants Compared With The Oldest Lubrication Tube..
In The Liquid Without Pressure Output Required To Ensure That The Air Pressure In The Range 5-7Kgf / Cm2 (Atomization And Gas, Associated Gas Pressure).
Features
- Air spread and spray mist volume adjustable design, easier to use.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure)
- Use the liquid viscosity at 68cSt or less.
- Save 60 80% lubricants compared with the oldest lubrication tube.
- Material: Plastic+metal+brass
- See more on Amazon...
Brand: ICRPSTU | Manufacturer: ICRPSTU
See On Amazon #17
Adjustable Mist Coolant Lubrication Spray System for CNC Lathe, Metal Hose with 2m Soft Tubing, Suitable for Cutting Engraving Machine
Asin: B0CXZC7BQ8 | Model: Fafeicyaoermg8x6c | PartNumber: Fafeicyaoermg8x6c
[Safe Processing] The Coolant Lubrication Sprayer Ensures That Gas Impurities Are Blown Away During Processing, Creating A Safer Operating Environment And Yielding Better Results For Your Projects..
[Easy Cleaning] The Cutting Cooling Sprayer With A Metal Hose Resolves The Issue Of Water Accumulation In The Machine, Making Cleaning A Breeze And More Convenient..
[Adjustable Settings] With Adjustable Spray Cooling Gas And Coolant, This Cnc Lathe Cooling System Is Versatile And Easy To Use Under Different Processing Conditions, Giving You Precise Control Over The Cooling Process..
[Long Lasting Metal Hose] The Mist Coolant Lubrication Spray System Features A 48Cm Flexible Metal Hose That Provides An Extended Lifespan. It Also Includes A 2M Soft Hose, Making It Suitable For Various Machines..
Features
- [Good Cooling Effect] This cooling sprayer for metal cutting and engraving saves over 80% of coolant and delivers cooling effects that rival traditional water cooling methods, keeping your equipment in optimal condition.
- [Long Lasting Metal Hose] The mist coolant lubrication spray system features a 48cm flexible metal hose that provides an extended lifespan. It also includes a 2m soft hose, making it suitable for various machines.
- [Safe Processing] The coolant lubrication sprayer ensures that gas impurities are blown away during processing, creating a safer operating environment and yielding better results for your projects.
- [Adjustable Settings] With adjustable spray cooling gas and coolant, this CNC lathe cooling system is versatile and easy to use under different processing conditions, giving you precise control over the cooling process.
- [Easy Cleaning] The cutting cooling sprayer with a metal hose resolves the issue of water accumulation in the machine, making cleaning a breeze and more convenient.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #18
New Mist Coolant Lubrication Spray System for 8mm Air Pipe CNC Lathe Mill Drill - Enhance Performance and Extend Tool Life
Asin: B0CLXW2MRR
Equipped With A Chip Evacuation System That Safely Removes Gas Processing Chips, Ensuring A Safer Working Environment..
Enables The Achievement Of Smooth Surfaces Even When Precision Machining Super-Hard Alloys, Ensuring Exceptional Workpiece Quality..
Adjustable Nebulizer Gas And Coolant Settings Allow For Easy Adaptation To Various Processing Conditions, Enhancing Versatility And Ease Of Use..
Provides Coolant Processing Capabilities That Can Save More Than 80% Of Coolant Usage, Without Compromising On The Cooling Effect Compared To Conventional Water-Cooled Solutions..
Features
- Offers a wide range of water problem-solving tools for effortless cleanup and efficient maintenance.
- Provides coolant processing capabilities that can save more than 80% of coolant usage, without compromising on the cooling effect compared to conventional water-cooled solutions.
- Equipped with a chip evacuation system that safely removes gas processing chips, ensuring a safer working environment.
- Adjustable nebulizer gas and coolant settings allow for easy adaptation to various processing conditions, enhancing versatility and ease of use.
- Enables the achievement of smooth surfaces even when precision machining super-hard alloys, ensuring exceptional workpiece quality.
- See more on Amazon...
Brand: Topyond | Manufacturer: Topyond
Dimensions: 1.18 x 5.91 x 1.97 inches | Weight: 0.40 pounds
See On Amazon #19
JoiJoy 2X Mist Coolant Lubrication Spray System Unit for CNC Lathe Milling Machine
Asin: B0C9GV7PPC
Brand: JoiJoy | Manufacturer: JoiJoy
See On Amazon #20
Mist Coolant Lubrication, Mist Coolant Lubrication Spray System System Spray for 8Mm Air Pipe CNC Lathe Mill Machine Sg
Asin: B0C6MZNRLV | Model: Eujgoov8tecmy2xzn | PartNumber: Eujgoov8tecmy2xzn
The Gas And Coolant Is Adjustable, Easy To Use On Different Processing Conditions.
Even The Super-Hard Alloy Machining The Workpiece Can Achieve A.
Gas Processing Chips Are Blown Away, Working Safer.
Processing The Coolant Can Save More Than 80%, The Cooling Effect Is No Less Than The Conventional Water-Cooled.
Features
- A lot of water problem solving tools, easier to clean up clean
- Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled
- The gas and coolant is adjustable, easy to use on different processing conditions
- Gas processing chips are blown away, working safer
- Even the super-hard alloy machining the workpiece can achieve a
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon
Looking For Something Else?
Search