Auto Dynasty 12-Point Cylinder Head Stud Hex Nut Kit Compatible with Chevy Big Block BBC V8 6.5L 6.6L 7.0L 7.4L 66-00
Asin: B085WHCWLJ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.▶️ 180,000 Psi Tensile Strength.
▶️ Brand New In Original Box, Never Been Tried On & Used.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish.
Features
- Complete Cylinder Head Stud Set
- Black Oxide Finish
- 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- Brand New In Original Box, Never Been Tried On & Used
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon Similar To Auto Dynasty 12Point Cylinder Head
#1
QODOLSI 1 PC Car Spark Plug Socket Ultra-Thin 14mm Wrench, 3/8" Drive 12-Point Spark Plug Socket Disassembly Tools, 360 Rotating Durable Steel Universal Joint, for Most Cars Motorcycles (Silver)
Asin: B0CM6BX9ZD | Model: QOBS1705SI-14MM | PartNumber: QOBS1705SI-14MM
Easy To Use: When Using The Spark Plug Sleeve, You Need To Put The Spark Plug Into The Twelve Corners Of The Wrench, Gently Put It Into The Cylinder, And Be Careful Not To Fall To The Ground. Clamps Onto The Flat Sides Of The Fastener Head Instead Of The Corners For Enhanced Grip. It Needs To Be Turned Clockwise When Tightening And Counterclockwise When Loosening. Do Not Lengthen The Handle At Will When Turning To Avoid Damaging The Sleeve..
Note: The Spark Plug Sleeve Is Only Used To Specifically Detach The Spark Plug. When Installing, Be Careful Not To Compress The Spark Plug Head With Too Much Torque. Before You Order, Whether 6-Point Or 12-Point, Just Determine The Nut Diameter(Measure Opposite Corners Or Sides)..
Wide Application: This Disassembly Tool Is Suitable For Bmw 3.0L Turbocharged Engines Above 2007, Such As N54, N55, N20, N26, S55, N63, B46, B48, B58, Bmw Motorcycles Such As R1200gs. Also Compatible With Various Mini Vehicles, Including R55, R56, R57 And R60 Engines, Mercedes Benz, Nissan, Citroen, Etc..
Professional Design: The 3/8-Inch Driven 14Mm Thin-Wall Spark Plug Socket Features A 12-Point Design With A Thin-Walled Deep Well. The Universal Movable Head Copes With Incorrect Angles, Saves Effort And Greatly Improves Work Efficiency. Internal Strong Suction Ring Design, Tightly Sucked And Not Easy To Fall Off. Steel Markings Are Printed On The Exterior To Facilitate Identification Of Specifications..
Features
- Steel Material: This spark plug sleeve tool is made of steel, which has super hardness. The surface is treated with matte chrome to enhance durability, avoid wear and tear, and is not easy to age and rust, extending its service life.
- Professional Design: The 3/8-inch driven 14mm thin-wall spark plug socket features a 12-point design with a thin-walled deep well. The universal movable head copes with incorrect angles, saves effort and greatly improves work efficiency. Internal strong suction ring design, tightly sucked and not easy to fall off. Steel markings are printed on the exterior to facilitate identification of specifications.
- Easy to Use: When using the spark plug sleeve, you need to put the spark plug into the twelve corners of the wrench, gently put it into the cylinder, and be careful not to fall to the ground. Clamps onto the flat sides of the fastener head instead of the corners for enhanced grip. It needs to be turned clockwise when tightening and counterclockwise when loosening. Do not lengthen the handle at will when turning to avoid damaging the sleeve.
- Wide Application: This disassembly tool is suitable for BMW 3.0L turbocharged engines above 2007, such as N54, N55, N20, N26, S55, N63, B46, B48, B58, BMW motorcycles such as R1200GS. Also compatible with various MINI vehicles, including R55, R56, R57 and R60 engines, Mercedes Benz, Nissan, Citroen, etc.
- Note: The spark plug sleeve is only used to specifically detach the spark plug. When installing, be careful not to compress the spark plug head with too much torque. Before you order, whether 6-point or 12-point, just determine the nut diameter(measure opposite corners or sides).
- See more on Amazon...
Brand: QODOLSI | Manufacturer: QODOLSI
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #2
AUCELI Car Magnetic Swivel Spark Plug Socket, 14mm Automotive 3/8" Drive 12" Extended Thin Wall Spark Plug Socket with 12 Point Professional Removal Tool, Universal for Most Vehicles
Asin: B0CW9BXPZ1 | Model: Spark Plug Socket | PartNumber: Spark Plug Socket
【Easy To Use】: Spark Plug Socket Wrench Is Very Simple To Use. First, Place The Spark Plug Into The Socket, Then Gently Lower The Socket Into The Cylinder, Taking Care Not To Drop It To The Ground. Finally, Make Sure The Spark Plug Is Fully Engaged In The Socket. Turn Clockwise To Tighten And Counterclockwise To Loosen, Do Not Use Excessive Force During Rotation..
【Reference Data】: This Magnetic Rotary Spark Plug Socket Has An Inner Diameter Of 14Mm And A Driver With An Inner Diameter Of 9.4Mm, With An Overall Size Of 305X17.8Mm (12 Inches X 0.7 Inches). Before Purchasing, Please Make Sure That The Diameter Of The Parallel Side Of The Hexagon Of Your Spark Plug Is Also 14Mm, Otherwise This Product Will Not Work..
【Wide Application】: The Extended Spark Plug Removal Tool Gives You The Extra Reach Needed For Tight Spots. So It Is Suitable For Most Of The Vehicles, Such As Small Cars, Trucks, Suvs, Rvs And Other Vehicles To Repair. Please Confirm The Size And Model Number Before You Buy It, So That It Won't Be Unusable When It Arrives..
【Practical Function】: This Product Is An Essential Tool For Removing And Installing Spark Plugs. Unlike Ordinary Tools On The Market, Our Spark Plug Socket Features A Strong Magnetic Core, 360° Rotatable And 12-Point Design, Which Can Effectively Protect The Spark Plug. It Enables You To Complete The Assembly Work Easily And Efficiently..
Features
- High Quality Material : All of these products are made of high quality chrome vanadium steel material with excellent craftsmanship. Mirror chrome plating, rust and oil corrosion resistant, easy to clean, with high hardness, heavy structure and wear-resistant quality. This product has a long service life and will not be easily damaged or broken.
- Practical Function : This product is an essential tool for removing and installing spark plugs. Unlike ordinary tools on the market, our spark plug socket features a strong magnetic core, 360 rotatable and 12-point design, which can effectively protect the spark plug. It enables you to complete the assembly work easily and efficiently.
- Easy to Use : Spark plug socket wrench is very simple to use. First, place the spark plug into the socket, then gently lower the socket into the cylinder, taking care not to drop it to the ground. Finally, make sure the spark plug is fully engaged in the socket. Turn clockwise to tighten and counterclockwise to loosen, do not use excessive force during rotation.
- Wide Application : The Extended Spark Plug Removal Tool gives you the extra reach needed for tight spots. So it is suitable for most of the vehicles, such as small cars, trucks, SUVs, RVs and other vehicles to repair. Please confirm the size and model number before you buy it, so that it won't be unusable when it arrives.
- Reference Data : This magnetic rotary spark plug socket has an inner diameter of 14mm and a driver with an inner diameter of 9.4mm, with an overall size of 305x17.8mm (12 inches x 0.7 inches). Before purchasing, please make sure that the diameter of the parallel side of the hexagon of your spark plug is also 14mm, otherwise this product will not work.
- See more on Amazon...
Brand: AUCELI | Manufacturer: AUCELI
Dimensions: 0.20 x 4.00 x 0.20 inches | Weight: 0.02 Pounds
Warranty: 0.2
See On Amazon #3
[7/16" Thread Blocks] 12-Point Cylinder Head Studs Kits Compatible with Ford Windsor Small Block 4.7L 5.0L 289 302 1963-2001, 190000 PSI Tensile Strength, Black Oxide
Asin: B0CVRB19V6
Solid Construction Design - It Is Made Of High Quality 8740 Chromoly Steel To Guarantee An Extremely Long Lasting Performance Life..
Easy And Quick To Install - Direct Replacement For Original Part With Precise Fitment, Fast And Easy To Install Without Any Drilling Or Modification..
Reliably Design - It Is Can Be Reusable And Provide Even Load Distribution Compared To Head Bolts..
Brilliant Performance - Come With Set Of [1] Head Studs Kits Included [20] Studs, [20] Nuts And [20] Washers Which Can Support Up To 190,000 Psi Tensile Strength..
Features
- Vehicle Compatibility - Designed to fit Ford Windsor 289 1963-1968, Ford Windsor 302 1968-2001. NOTE: Fits small block 4.7L, 5.0L models with 7/16" thread blocks.
- Brilliant Performance - Come with set of [1] head studs kits included [20] studs, [20] nuts and [20] washers which can support up to 190,000 PSI tensile strength.
- Solid Construction Design - It is made of high quality 8740 chromoly steel to guarantee an extremely long lasting performance life.
- Reliably Design - It is can be reusable and provide even load distribution compared to head bolts.
- Easy and Quick to Install - Direct replacement for original part with precise fitment, fast and easy to install without any drilling or modification.
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #4
[1/2" Thread Blocks] 12-Point Cylinder Head Studs Kits Compatible with Ford Windsor Small Block 5.8L 351 1969-1997, 190000 PSI Tensile Strength, Black Oxide
Asin: B0CVR8N9H5
Solid Construction Design - It Is Made Of High Quality 8740 Chromoly Steel To Guarantee An Extremely Long Lasting Performance Life..
Easy And Quick To Install - Direct Replacement For Original Part With Precise Fitment, Fast And Easy To Install Without Any Drilling Or Modification..
Reliably Design - It Is Can Be Reusable And Provide Even Load Distribution Compared To Head Bolts..
Brilliant Performance - Come With Set Of [1] Head Studs Kits Included [20] Studs, [20] Nuts And [20] Washers Which Can Support Up To 190,000 Psi Tensile Strength..
Features
- Vehicle Compatibility - Designed to fit Ford Windsor 351 1969-1997. NOTE: Fits small block 5.8L models with 1/2" thread blocks.
- Brilliant Performance - Come with set of [1] head studs kits included [20] studs, [20] nuts and [20] washers which can support up to 190,000 PSI tensile strength.
- Solid Construction Design - It is made of high quality 8740 chromoly steel to guarantee an extremely long lasting performance life.
- Reliably Design - It is can be reusable and provide even load distribution compared to head bolts.
- Easy and Quick to Install - Direct replacement for original part with precise fitment, fast and easy to install without any drilling or modification.
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #5
Auto Dynasty 12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Acura EL HONDA CIVIC DEL SOL CRX D Series Engines 88-05
Asin: B08K337J4P
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #6
12-Point Engine Cylinder Head Style Engine Bold Stud Nuts Set for Acura Integra GSR Type-R w/B18c1 B18c5 Engine 94-01
Asin: B08R66RKGR
▶️ Made With 8740 Chromoly Steel, High Quality Construction Is Durable And Sturdy. Tensile Strength Up To 180, 000 Psi.
▶️ Professional Installation Is Highly Recommended, Installation Instruction Is Not Included.
▶️ Comes With Complete Cylinder Head Stud Set, 10X Studs/ 10X Washers/ 10X 12-Point Hex Nuts Are Included.
▶️ 12-Point Cylinder Chromoly Head Studs W/Black Oxide Surface Finish, Perfectly Suitable For Your Vehicle And Give You A Better Experience, Direct Replacement For Old Or Broken One.
Features
- Compatible with 94-01 Acura Intergra GSR/Type R(Fits Models with B18C1&B18C5 Engines)
- 12-Point Cylinder Chromoly Head Studs w/Black Oxide Surface Finish, Perfectly Suitable for Your Vehicle and Give You a Better Experience, Direct Replacement for Old or Broken one
- Made with 8740 Chromoly Steel, High Quality Construction is Durable and Sturdy. Tensile strength up to 180, 000 PSI
- Comes with Complete Cylinder Head Stud Set, 10x Studs/ 10x Washers/ 10x 12-Point Hex Nuts are Included
- Professional Installation is Highly Recommended, Installation Instruction is NOT Included
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #7
Auto Dynasty 12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Baja Forester Impreza Legacy Outback 2.0T 2.5T 2.5L 96-11
Asin: B08K2RLL7C
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #8
Auto Dynasty 12-Point Cylinder Head Stud Hex Nut Kit Compatible with Chevy LS1 LS3 LS6 L98 5.3L 5.7L 6.0L 4.8L 5.3L 6.0L 2004+
Asin: B085WH23TC
▶️ 180,000 Psi Tensile Strength.
▶️ Brand New In Original Box, Never Been Tried On & Used.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish.
Features
- Complete Cylinder Head Stud Set
- Black Oxide Finish
- 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- Brand New In Original Box, Never Been Tried On & Used
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #9
Auto Dynasty 12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Dodge Ram 2500 3500 Cummins 5.9L 12V 89-98
Asin: B08K2Q64KX
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #10
Auto Dynasty 12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Toyota Supra Cressida 86-92
Asin: B08K2B9BNZ
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #11
Auto Dynasty 12-Point Engine Cylinder Head Style Engine Bold Stud Nuts Set for Honda Civic D16Y5 D16Y7 D16Y8 Engines Models 96-00
Asin: B08R67QZ2T
▶️ Made With 8740 Chromoly Steel, High Quality Construction Is Durable And Sturdy. Tensile Strength Up To 180, 000 Psi.
▶️ Professional Installation Is Highly Recommended, Installation Instruction Is Not Included.
▶️ Comes With Complete Cylinder Head Stud Set, 10X Studs/ 10X Washers/ 10X 12-Point Hex Nuts Are Included.
▶️ 12-Point Cylinder Chromoly Head Studs W/Black Oxide Surface Finish, Perfectly Suitable For Your Vehicle And Give You A Better Experience, Direct Replacement For Old Or Broken One.
Features
- Compatible with 96-00 Honda Civic D16Y5, D16Y7, D16Y8 Engines(Fits Non Si Models Only)
- 12-Point Cylinder Chromoly Head Studs w/Black Oxide Surface Finish, Perfectly Suitable for Your Vehicle and Give You a Better Experience, Direct Replacement for Old or Broken one
- Made with 8740 Chromoly Steel, High Quality Construction is Durable and Sturdy. Tensile strength up to 180, 000 PSI
- Comes with Complete Cylinder Head Stud Set, 10x Studs/ 10x Washers/ 10x 12-Point Hex Nuts are Included
- Professional Installation is Highly Recommended, Installation Instruction is NOT Included
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #12
12-Point Cylinder Head Stud Hex Nut Kit Compatible with Small Block SBC 265 267 283 302 305 307 327 350 383 400 55-00
Asin: B085WGZG8P
▶️ 180,000 Psi Tensile Strength.
▶️ Brand New In Original Box, Never Been Tried On & Used.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish.
Features
- Complete Cylinder Head Stud Set
- Black Oxide Finish
- 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- Brand New In Original Box, Never Been Tried On & Used
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #13
Auto Dynasty 12-Point Engine Cylinder Head Studs Assembly Kit Compatible with Ford E-350 E-450 F250-F550 Super Duty 6.0L Powerstroke Diesel 03-10
Asin: B08K2WXGC2
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #14
Auto Dynasty 12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Dodge Neon SRT-4 Chrysler PT Cruiser Turbo 2.4L Turbo 03-09
Asin: B08K32S6YD
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #15
12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Honda Prelude H22 Engine Models 93-01
Asin: B08K36JVGQ
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #16
12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Honda Preluede S SI SE Accord 90-96
Asin: B08K33XDV5
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #17
12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Supra GS IS300 SC300 400 w/2JZGE 2JZGTE Engines 92-05
Asin: B08K2Y3J78
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #18
12-Point Hex Nut Engine Cylinder Head Studs Assembly Kit for Supra GS IS SC 300 SC400 w/2JZGE 2JZGTE Engines 92-05
Asin: B08K2PCC2N
▶️ All Washers / Studs / Nuts Included.
▶️ 8740 Chromoly Construction.
▶️ Black Oxide Finish; 180,000 Psi Tensile Strength.
▶️ Complete Cylinder Head Stud Set.
Features
- Brand New In Original Box, Never Been Tried On & Used
- Complete Cylinder Head Stud Set
- All Washers / Studs / Nuts Included
- Black Oxide Finish; 180,000 PSI Tensile Strength
- 8740 Chromoly Construction
- See more on Amazon...
Brand: Auto Dynasty | Manufacturer: Auto Dynasty
See On Amazon #19
yvshy Pack-1 Car Spark Plug Disassembly Tool, 16mm 360 Degree Universal Head Rotating Spark Plug Sleeve Ultra-Thin Wrench, 3/8" Drive 12-Point Spark Plug Sleeve Accessory, Universal for Cars (Silver)
Asin: B0CZ8H5C13 | Model: YVSBS1705SI-16MM | PartNumber: YVSBS1705SI-16MM
Universal Accessories: This Tool Is Suitable For Disassembly And Assembly Of Most Automotive Spark Plug Sleeves. But It Is Recommended That You Check Your Spark Plug Sleeve Specifications Before Ordering To Ensure This Product Is Suitable For Your Car..
How To Use: When Using The Spark Plug Sleeve, You Need To Put The Spark Plug Into The Twelve Corners Of The Wrench, Gently Put It Into The Cylinder, And Be Careful Not To Fall To The Ground. It Needs To Be Turned Clockwise When Tightening And Counterclockwise When Loosening. Clamps Onto The Flat Sides Of The Fastener Head Instead Of The Corners For Enhanced Grip..
Note: The Spark Plug Sleeve Is Only Used To Specifically Detach The Spark Plug. When Installing, Be Careful Not To Compress The Spark Plug Head With Too Much Torque. Before You Order, Whether 6-Point Or 12-Point, Just Determine The Nut Diameter(Measure Opposite Corners Or Sides)..
Reliable Quality: The Surface Of The Spark Plug Sleeve Has Been Treated With Special Gloss To Enhance Durability, Avoid Wear And Tear, Avoid Aging And Rust, And Extend Service Life. This Spark Plug Socket Tool Is Made Of Steel, Which Is Super Hard And Not Easy To Break..
Features
- Professional Design: The 3/8" driven 16mm thin-wall spark plug socket features a 12-point design with a thin-walled deep well. The universal movable head copes with incorrect angles, saves effort and greatly improves work efficiency.
- Reliable Quality: The surface of the spark plug sleeve has been treated with special gloss to enhance durability, avoid wear and tear, avoid aging and rust, and extend service life. This spark plug socket tool is made of steel, which is super hard and not easy to break.
- Universal Accessories: This tool is suitable for disassembly and assembly of most automotive spark plug sleeves. But it is recommended that you check your spark plug sleeve specifications before ordering to ensure this product is suitable for your car.
- Note: The spark plug sleeve is only used to specifically detach the spark plug. When installing, be careful not to compress the spark plug head with too much torque. Before you order, whether 6-point or 12-point, just determine the nut diameter(measure opposite corners or sides).
- How to Use: When using the spark plug sleeve, you need to put the spark plug into the twelve corners of the wrench, gently put it into the cylinder, and be careful not to fall to the ground. It needs to be turned clockwise when tightening and counterclockwise when loosening. Clamps onto the flat sides of the fastener head instead of the corners for enhanced grip.
- See more on Amazon...
Brand: yvshy | Manufacturer: yvshy
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon
Looking For Something Else?
Search