DPTOOL Oil Pump Primer Tool for GM Chevy V6 V8 SBC 350 BBC 454 Small Big Block
Asin: B086KR2PY7
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Featuring A Special Billet Aluminum Sleeve That Accurately Positions The Shaft And Keeps It From Wobbling..
Fits: Sb/Bb Chevy V8 & Chevy V6 Engines..
Thick Shaft Design With Triangle Shaped End For No Slippage. For Use With 3/8" Or 1/2" Chuck Hand Drill..
Fits All Small And Big Blocks Including Popular Sizes Of 327 350 355 383 388 400 406 427 434 454.
Features
- These oil pump primer lets you spin the oil pump with a drill motor and bring up the oil pressure and moving the oil to the top of the engine prior to starting the engine, preventing unnecessary wear or damage to rotating and valve train components.
- Fits all small and big blocks including popular sizes of 327 350 355 383 388 400 406 427 434 454
- Featuring a special billet aluminum sleeve that accurately positions the shaft and keeps it from wobbling.
- Thick shaft design with triangle shaped end for no slippage. For use with 3/8 or 1/2 chuck hand drill.
- Fits: SB/BB Chevy V8 & Chevy V6 Engines.
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen DP Auto Tools
See On Amazon Similar To DPTOOL Oil Pump Primer Tool
#1
Amarine Made Oil Pump, Oil Extractor Pump 12V, 60W Oil Removal Pump for Oil Change, Electric Transfer Oil Pump, Easily Scavenge Oil from Cars, Motorcycles, RVs, Boats, and lawn Equipment
Asin: B082TNCJP8 | Model: YI-0564 | PartNumber: YI-0564
【Usage Guide】: Before Using The Oil Pump Extractor, You Need To Start The Motor To Warm The Oil To 104°F-140°F. Then Shut Down The Motor Before Pumping. It Cannot Be Used For Gasoline/Petrol, Water, Gearbox Oil, Or Flammable Liquids (Fuel, Gasoline, Etc.). Before Use, Please Pay Attention To Whether The Inlet And Outlet Directions Correspond Correctly To The Hoses And Positive And Negative Poles, And Lock The Hoses. Press The Button Only After All Connections Are Installed. Do Not Pump Out Oil W.
【Wide Application】:This 12V Transfer Change Oil Pump Doesn’T Have Complex Workflows, And Can Easily Remove Oil Scavenged In The Tube From Cars, Motorcycles, Rvs, Boats,Trucks, Quad Bikes, And Lawn Equipment At Any Time. It Is Also An Excellent Choice For Changing The Oil In Scooters, Ships, Marine Trucks, Tractors, Truck Forklifts ,And More..
【Full Accessories】: The Set Of Motor Oil Diesel Fluid Transfer Pump Contains An 8 X 7 X 4 Inch, 1 Pound Oil Change Pump Along With The Following Accessories: A 1.5 Meter Outlet Hose, A 1.2 Meter Inlet Hose, 2 Hose Locks, And 2 Battery Clamps..
【Easy Installation】: First Connect The Hose's Inlet And Outlet To The Oil Inlet And Outlet, And Then Connect The Power Clip With A Red Positive Link And A Black Negative Link To The Car Battery. Clamp The Conductive Clip, And Press The Button Again. The Control Of The Oil Transfer Pump Is Very Simple, And You Can Run Your Engine Smoothly By Yourself..
Features
- Efficient Equipment : This 12V, 8 "L x 7" W x 4 "H oil pump has a powerful force of 60W. Drawing 5A of current, its motor delivers 0.8-1.0 liters/min flow rate while operating steadily and silently. It s very portable and can be used anywhere without location limits, empowering convenient oil changes wherever desired.
- Easy Installation : First connect the hose's inlet and outlet to the oil inlet and outlet, and then connect the power clip with a red positive link and a black negative link to the car battery. Clamp the conductive clip, and press the button again. The control of the oil transfer pump is very simple, and you can run your engine smoothly by yourself.
- Usage Guide : Before using the oil pump extractor, you need to start the motor to warm the oil to 104 F-140 F. Then shut down the motor before pumping. It cannot be used for gasoline/petrol, water, gearbox oil, or flammable liquids (fuel, gasoline, etc.). Before use, please pay attention to whether the inlet and outlet directions correspond correctly to the hoses and positive and negative poles, and lock the hoses. Press the button only after all connections are installed. Do not pump out oil w
- Full Accessories : The set of Motor Oil Diesel Fluid Transfer Pump contains an 8 x 7 x 4 inch, 1 pound oil change pump along with the following accessories: a 1.5 meter outlet hose, a 1.2 meter inlet hose, 2 hose locks, and 2 battery clamps.
- Wide Application :This 12V transfer change oil pump doesn t have complex workflows, and can easily remove oil scavenged in the tube from cars, motorcycles, RVs, boats,trucks, quad bikes, and lawn equipment at any time. It is also an excellent choice for changing the oil in scooters, ships, marine trucks, tractors, truck forklifts ,and more.
- See more on Amazon...
Brand: Amarine Made | Manufacturer: Alfa Marine (Shanghai) Co., Ltd
Dimensions: 4.00 x 8.00 x 7.00 inches | Weight: 1.00 Pounds
See On Amazon #2
EWK 6L Vacuum Oil Extractor Pump Fluid Extractor Oil Change Pump for Automotive and Marine
Asin: B079FJ21DV | Model: 2699027920 | PartNumber: 2699027920 | Ean: 0700587513800 | UPC: 700587513800
【 Hominization Design 】The 59 Inch Transparent Main Tube Makes Checking Oil Quality Easier, And The 42 Inch Suction Probe Is Made Of Flexible Metal For Easily Slide Into The Bottom Of Oil Pan. Sealing Cap To Keep The Tank Well-Sealed And Safe. Pour Spout Makes It Fluent To Dump The Waste Fluid Without Spilling..
【12+6 Month】Durable Products Backed By An Extraordinary 12+6 Months Warranty..
【Wide Application】Perfectly Extracts Most Fluid Types: Engine Oil, Transmission Fluid, Coolant, And Power Steering Fluid. Applicable For Cars, Motorcycles, Lawnmowers, Boats, Jet Skis, Etc. *Not Compatible With Mercedes W212 E350, And C218 Cls 350. *Note: Gasoline And Fluids With High Volatility, High Corrosion, High Alkalinity, And High Temperature Are Forbidden To Be Used On The Extractor..
【 Easy To Use 】 Create Vacuum And Powerful Suction By Pumping The Handle, Makes It Quick To Empty Fluids In Your Equipment. The Special Extra-Wide Base Designed Allows You To Step On It To Stabilize The Tank While Pumping. Built-In Capacity Marker For Easily Tracking The Progress..
Features
- Work Freely Portable 6 liters sturdy and lightweight extractor pump for changing fluid. Simple manual operation requires no other equipment to use with. Perfect for carrying around to complete various fluid extraction jobs.
- Easy to Use Create vacuum and powerful suction by pumping the handle, makes it quick to empty fluids in your equipment. The special extra-wide base designed allows you to step on it to stabilize the tank while pumping. Built-in capacity marker for easily tracking the progress.
- Hominization Design The 59 inch transparent main tube makes checking oil quality easier, and the 42 inch suction probe is made of flexible metal for easily slide into the bottom of oil pan. Sealing cap to keep the tank well-sealed and safe. Pour spout makes it fluent to dump the waste fluid without spilling.
- Wide Application Perfectly extracts most fluid types: engine oil, transmission fluid, coolant, and power steering fluid. Applicable for cars, motorcycles, lawnmowers, boats, jet skis, etc. *Not compatible with Mercedes W212 E350, and C218 CLS 350. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity, and high temperature are FORBIDDEN to be used on the extractor.
- 12+6 Month Durable products backed by an extraordinary 12+6 months warranty.
- See more on Amazon...
Brand: EWK | Manufacturer: EWK
Dimensions: 14.60 x 9.50 x 9.50 inches
See On Amazon #3
EWK Patented 6.5L Pneumatic/Manual Oil Extractor Change Pump for Automotive Fluids Vacuum Evacuation
Asin: B06WD64H8Z | Model: EB0103 | PartNumber: EB0103 | Ean: 0700615477142 | UPC: 700615477142
【No Oil Left】The Vacuum Oil Changer Comes With 2 Sizes Of Upgraded Extra-Long Tubes With Different Diameter. Slide It As Far As Possible To Reach The Very Bottom Of Your Reservoir And Suck Up Every Drop Of Oil..
【12+6 Month】Durable Products Backed By An Extraordinary 12+6 Months Warranty..
【Wide Application】Perfectly Extracts Most Fluid Types: Engine Oil, Transmission Fluid, Coolant, And Power Steering Fluid. Applicable For Cars, Motorcycles, Lawnmowers, Boats, Jet Skis, Etc. *Not Compatible With Mercedes W212 E350, And C218 Cls 350. *Note: Gasoline And Fluids With High Volatility, High Corrosion, High Alkalinity, And High Temperature Are Forbidden To Be Used On The Extractor..
【Dual-Purpose】Equipped With Pneumatic And Manual Mode Depend On The Environment And Your Own Equipment. The Manual Mode Requires No Other Equipment To Use, While The Pneumatic Mode Turns The Pump Into A High-Speed Oil Changer. (Suction Speed: 1.8L/Min.).
Features
- Humanized Design With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
- Dual-Purpose Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.)
- No Oil Left The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil.
- Wide Application Perfectly extracts most fluid types: engine oil, transmission fluid, coolant, and power steering fluid. Applicable for cars, motorcycles, lawnmowers, boats, jet skis, etc. *Not compatible with Mercedes W212 E350, and C218 CLS 350. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity, and high temperature are FORBIDDEN to be used on the extractor.
- 12+6 Month Durable products backed by an extraordinary 12+6 months warranty.
- See more on Amazon...
Brand: EWK | Manufacturer: EWK
Dimensions: 22.05 x 8.27 x 8.27 inches
See On Amazon #4
SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool
Asin: B0B2NTWZFX | Model: SW-66056 | PartNumber: SW-66056
Fast Suction Speed Of 1.8L/Min. The Oil Change Pump Extracts Engine Oil From A 4-Cylinder Car In A Couple Of Minutes In Pneumatic Mode..
Its A Perfect Tool For Working On Vehicles Anytime And Anywhere.No Need To Lift Up Or Crawl Under The Car To Drain Out The Oil.Note:Fluids With High Volatility, High Corrosion, High Alkalinity And High Temperature Cant Be Used..
Use This Oil Extractor Pump, The Engine Oil And Transmission Fluid Could Be Extracted Directly By The Dipstick Tube, The Sealing Cap Is Attached To Stop The Liquid From Spill During Transportation..
6.5L Vacuum Fluid Extractor Comes With 5 Different Diameter Tubes Go To The Bottom Of Oil Pan. Also 3.2 Feet Flex Hose And 3 Extra Dipstick Hoses To Reach The Bottom Of The Reservoir And Suck Up All Fluid..
Features
- Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor.
- 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid.
- Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode.
- Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation.
- Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used.
- See more on Amazon...
Brand: SWANLAKE GARDEN TOOLS | Manufacturer: SWANLAKE GARDEN TOOLS
See On Amazon #5
DasMarine 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump + Tubes Truck Rv Boat ATV
Asin: B07DCPMP4S | Ean: 0615200886615, 0615200896188 | UPC: 615200886615, 615200896188
【Easy Installation】: You Just Need To Place The Inlet And Outlet Hoses At The Appropriate Positions, Connect The Power Clip With A Red Positive Link And A Black Negative Link To The Car Battery. And Press The Button. This Process Is Very Simple And You Can Often Do It By Yourself To Ensure Your Engine Runs Smoothly..
【Warranty Guaranteed】: We Offer A 30-Day Money-Back Guarantee, As Well As A 1-Year Warranty Against Any Defects.Customers' Comments Will Play An Important Role To Our Shop.If There Is A Problem With The Product. Please Email Us, We Would Reply You Within 24 Hours..
【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
【Usage Guide】:This Oil Pump Is Not Suitable For Gasoline/Petrol. Do Not Use This Oil Extractor Pump To Extract Water, Gearbox Oil Or Easy Flammable Liquids (Fuel, Petrol Etc).Before Use, Please Pay Attention To Whether The Inlet And Outlet Directions Correspond Correctly To The Hoses And Positive And Negative Poles, And Insure The Hoses Locked. Before Using The Oil Pump Extractor, You Need To Start The Motor To Warm The Oil To 104°F-140°F. Otherwise, It Will Affect The Pumping Speed. Then Shut Down The Motor Before Pumping. Press The Button Only After All Connections Are Installed..
Features
- Specificaiton : Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 0.2L / min;Diesel or Heating Oil Flow Rate: approx. 1.5L / min. Package Included: 1 x Pump; 1 x Outlet Hose(thick, 1.5m long); 1 x Inlet Hose(thin, 1.2m long); 2 x Hose Clamps; 2 x Battery Clamps;
- Usage Guide :This oil pump is NOT suitable for gasoline/petrol. Do not use this oil extractor pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).Before use, please pay attention to whether the inlet and outlet directions correspond correctly to the hoses and positive and negative poles, and insure the hoses locked. Before using the oil pump extractor, you need to start the motor to warm the oil to 104 F-140 F. Otherwise, it will affect the pumping speed. Then shut down the motor before pumping. Press the button only after all connections are installed.
- Easy Installation : You just need to place the inlet and outlet hoses at the appropriate positions, connect the power clip with a red positive link and a black negative link to the car battery. and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- Ideal Equipment For : Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- WARRANTY GUARANTEED : We offer a 30-day money-back guarantee, as well as a 1-year warranty against any defects.Customers' comments will play an important role to our shop.If there is a problem with the product. please email us, we would reply you within 24 hours.
- See more on Amazon...
Brand: DasMarine | Manufacturer: DasMarine
See On Amazon #6
EWK 6.5L Manual Oil Extractor Change Pump for Automotive Fluids Vacuum Evacuation
Asin: B07LGTGMWN | Ean: 0700587514043 | UPC: 700587514043
【Effortless Access】Get Every Drop Of Oil With Ewk's Upgraded Vacuum Oil Changer And Its Extra-Long Tubes. Simply Slide It To The Very Bottom Of Your Reservoir, Ensuring Complete Suction..
【12+6 Month】Durable Products Backed By An Extraordinary 12+6 Months Warranty..
【Wide Application】Perfectly Extracts Most Fluid Types: Engine Oil, Transmission Fluid, Coolant, And Power Steering Fluid. Applicable For Cars, Motorcycles, Lawnmowers, Boats, Jet Skis, Etc. *Not Compatible With Mercedes W212 E350, And C218 Cls 350. *Note: Gasoline And Fluids With High Volatility, High Corrosion, High Alkalinity, And High Temperature Are Forbidden To Be Used On The Extractor..
【Simple & Secure】Change Oil Easily Anytime, Anywhere With Just 10 Pumps (1 S/Pump), No Additional Equipment Is Needed. Transport Worry-Free With The Attached Sealing Cap To Prevent Spills. *Note: After 30S, Might Need To Pump Again To Maintain The Vacuum And Ensure The Oil Is Fully Drained..
Features
- Hassle-Free Change oil without crawling under your car. No mess, no cleanup. Simply remove the dipstick and insert the tube for a seamless oil change experience.
- Simple & Secure Change oil easily anytime, anywhere with just 10 pumps (1 s/pump), no additional equipment is needed. Transport worry-free with the attached sealing cap to prevent spills. *Note: After 30s, might need to pump again to maintain the vacuum and ensure the oil is fully drained.
- Effortless Access Get every drop of oil with EWK's upgraded vacuum oil changer and its extra-long tubes. Simply slide it to the very bottom of your reservoir, ensuring complete suction.
- Wide Application Perfectly extracts most fluid types: engine oil, transmission fluid, coolant, and power steering fluid. Applicable for cars, motorcycles, lawnmowers, boats, jet skis, etc. *Not compatible with Mercedes W212 E350, and C218 CLS 350. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity, and high temperature are FORBIDDEN to be used on the extractor.
- 12+6 Month Durable products backed by an extraordinary 12+6 months warranty.
- See more on Amazon...
Brand: EWK | Manufacturer: EWK
Dimensions: 22.05 x 8.27 x 8.27 Inches
See On Amazon #7
Oil Change Pump Extractor, 12v 60w Oil Extractor Pump Oil Pump Extractor, Diesel Fluid Scavenge Suction Oil Transfer Pump for Changing Oil, Oil Change Pump for Boat, Tubes, Truck, RV, ATV, Riding Mowe
Asin: B07X33FC1V | Ean: 8676495968532
For Differential Fluid And Transmission Fluid - This High Efficient Self-Priming Oil Extractor Pump Is Easy To Pump Various Fluids And Oils. You Just Need To Place The Inlet/Outlet Hoses At The Appropriate Positions, Connect The Power Clamps To The Car Battery And Press The Button. This Process Is Very Simple And You Can Often Do It By Yourself To Ensure Your Engine Runs Smoothly..
100% Customer Satisfaction Guaranteed - 1Mannew Oil Change Pump Extractor - 12 Volt / 5 Amp Dc Motor.Ideal Transfer Pump For Your Quick And Clean Oil-Changes.The Oil Will Simply Draw Out The Motor Through The Oil Dipstick Bore; If You Are Not Satisfied With Engine Oil Extractor Pump, Feel Free To Contact Us For Solutions..
Professional Oil Cleaning Tool - The Oil Transfer Pump Is Not Suitable For Gasoline/Petrol. Do Not Use This Fluid Oil Change Pump To Extract Water, Gearbox Oil Or Easy Flammable Liquids (Fuel, Petrol Etc). Suitable For Extracting Oil, Diesel Etc From A Vehicle, (Never Use For Petrol), Greatly To Help Your Oil-Cleaning Task, Saving Time..
Engine Oil Change Made Easy! - The 12V Oil Extractor Pump Are Very Easy To Use And Makes A Top Down Oil Change So Easy. Pumps Oil Out Throw Dip Stick, No Need To Lay Under Your Car. Ideal Oil Change Pump Extractor Equipment For Quick And Clean Oil-Changes. The Oil Will Simply Draw Out The Motor Through The Oil Dipstick Bore. Simple On/Off Power Switch, Easy To Use. Great For A Quick Oil Change..
Features
- QUICK AND CLEAN OIL CHANGES - Transfer pump for changing oil. Extracting Motor Oil From Your Vehicle Without Mess & Specialized Tools Extract The Oil from Your Car, Motorcycle, Scooter, Marine, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, riding mower, snowmower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- ENGINE OIL CHANGE MADE EASY! - The 12v oil extractor pump are very easy to use and makes a top down oil change so easy. Pumps oil out throw dip stick, no need to lay under your car. Ideal oil change pump extractor equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use. Great for a quick oil change.
- FOR DIFFERENTIAL FLUID AND TRANSMISSION FLUID - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- PROFESSIONAL OIL CLEANING TOOL - The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc). Suitable for extracting oil, diesel etc from a vehicle, (never use for petrol), greatly to help your oil-cleaning task, saving time.
- 100% CUSTOMER SATISFACTION GUARANTEED - 1MANNEW OIL CHANGE PUMP EXTRACTOR - 12 Volt / 5 Amp DC Motor.Ideal Transfer Pump for your quick and clean oil-changes.The oil will simply draw out the motor through the oil dipstick bore; If you are not satisfied with engine oil extractor pump, feel free to contact us for solutions.
- See more on Amazon...
Manufacturer: MANNEW
See On Amazon #8
Five Oceans Oil Extractor Pump, Manual Oil Change Pump Kit for Inboard and I/O Engines/Jet Skis, 1/4-Inch 5/16-Inch 1/2-Inch Drain Tubes - FO3915
Asin: B01L2UFYS4 | Model: 3915 | PartNumber: 3915 | Ean: 0747565985068 | UPC: 747565985068
Marine-Grade Materials - High-Quality Pump, Hoses, And Fittings Components That Are Corrosion-Resistant And Built To Withstand Exposure To Water, Salt, And Other Harsh Marine Conditions.
Five Oceans, 40 Years Developing High-Quality Marine & Outdoor Products.
Handy Tool - This Self-Priming Oil Extractor Pump 9-Inch Long, Offers A Convenient Alternative To Traditional Draining Methods, Making Fluid Changes Easier And Less Messy.
3 Different Size Drain Tubes - This Oil Extractor Pump Kit Includes 3 Different-Sized Drain Tubes To Fit All Inboard And I/O Engines - Jet Skis. These Tubes Ensure A Secure Fit And Proper Fluid Extraction.
Features
- DESIGNED TO - Drains oil through the dipstick on the inboard and I/O engines. Drain Tubes - Inlet tubes: 1/4-Inch x 28-1/4-Inch, 5/16-Inch x 25-Inch. Outlet tube, 1/2-Inch x 11-3/8-Inch
- 3 DIFFERENT SIZE DRAIN TUBES - This oil extractor pump kit includes 3 different-sized drain tubes to fit all inboard and I/O engines - Jet Skis. These tubes ensure a secure fit and proper fluid extraction
- MARINE-GRADE MATERIALS - High-quality pump, hoses, and fittings components that are corrosion-resistant and built to withstand exposure to water, salt, and other harsh marine conditions
- HANDY TOOL - This Self-Priming Oil Extractor Pump 9-Inch Long, offers a convenient alternative to traditional draining methods, making fluid changes easier and less messy
- FIVE OCEANS, 40 Years Developing High-Quality Marine & Outdoor Products
- See more on Amazon...
Brand: Five Oceans | Manufacturer: Five Oceans
See On Amazon #9
12V 60W Oil Change Pump Extractor, Upgraded Oil/Diesel Fluid Pump Extractor Scavenge Suction Oil Transfer Pump, Marine Electric Oil Change Pump, oil removal pump For Boat Car Motorcycle ATV
Asin: B09SQ7HP9N | Ean: 0771077505797 | UPC: 771077505797
【Easy Installation】:You Just Need To Place The Inlet And Outlet Hoses At The Appropriate Positions, Connect The Power Clamps To The Car Battery And Press The Button. This Process Is Very Simple And You Can Often Do It By Yourself To Ensure Your Engine Runs Smoothly..
【Widely Application】This Scavenge Suction Kit Is Portable And Easy Operation, It Saves Time And Keep Clean For Your Oil Changing. It Is A Great Helper For Car, Motorcycle, Scooter, Quad Bike, Truck, Rv, Atv, Boat, Marine, Forklift, Generator, Tractor, Ride On Mower Etc..
【Safe Operation】: This High Efficient Self-Priming Oil Extractor Pump Is Easy To Pump Various Fluids And Oils. To Pump Oil Properly, Before Use, Please Heat The Car Engine To 104°F-140 °F (40℃-60℃) For About 15 Minutes To Prevent The Oil From Solidifying And Blocking. Tips: It Is Not Suitable For Gasoline. Do Not Use This Fluid Oil Change Pump To Extract Water, Gearbox Oil, Or Easily Flammable Liquids (Fuel, Petrol, Etc)..
【 Little Pump Specificaiton】: Input Voltage: Dc 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 Degrees) Flow Rate: Approx. 0.8-1.0L / Min,The Oil Transfer Pump Is Mini But Powerful,Perfect For Quick And Easy Oil Changes That You Can Do At Home..
Features
- 12V 60W Oil Change Pump Extractor Upgraded Oil/Diesel Fluid Pump Extractor Scavenge Suction Oil Transfer Pump, Marine Electric Oil Change Pump, oil removal pump ,oil extraction pump,quick extract oil pump, portable and small oil pump.
- Little Pump Specificaiton : Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 0.8-1.0L / min,The oil transfer pump is mini but powerful,Perfect for quick and easy oil changes that you can do at home.
- Easy Installation :you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- Safe Operation : This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. To pump oil properly, before use, please heat the car engine to 104 F-140 F (40 -60 ) for about 15 minutes to prevent the oil from solidifying and blocking. Tips: it is NOT suitable for gasoline. Do not use this fluid oil change pump to extract water, gearbox oil, or easily flammable liquids (fuel, petrol, etc).
- Widely Application This Scavenge Suction Kit is portable and easy operation, it saves time and keep clean for your oil changing. It is a great helper for Car, Motorcycle, Scooter, Quad Bike, Truck, RV, ATV, Boat, Marine, Forklift, Generator, Tractor, Ride On Mower Etc.
- See more on Amazon...
Brand: LEIMO KPARTS | Manufacturer: LEIMO KPARTS
See On Amazon #10
For SB & BB Chevy Oil Pump Primer Tool Compatible with GM Chevy V6 V8 SBC 350 BBC 454 all small and big blocks
Asin: B0C4F9JRH8 | Model: YX04377 | PartNumber: YX04377 | Ean: 0729162435634 | UPC: 729162435634
Black Oxide Coated Steel Shaft..
One Year Warranty.
Made Of High-Quality Aluminum Alloy And Steel.
Billet Aluminum Adjustable Sleeve, Black Anodized..
Features
- Compatible with GM Chevy V6 V8 SBC 350 BBC 454 all small and big blocks
- Billet Aluminum Adjustable Sleeve, Black Anodized.
- Black Oxide Coated Steel Shaft.
- Made of high-quality aluminum alloy and steel
- One year warranty
- See more on Amazon...
Brand: WnSEu | Manufacturer: MSCRP
Warranty: 1 year
See On Amazon #11
ATPEAM 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transf
Asin: B07Z2V9SM3 | Model: JH-JY01 | PartNumber: JH-JY01 | Ean: 0687925996924 | UPC: 687925996924
【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
【Warning】: This Product Is Not Suitable For Gasoline/Petrol. Do Not Use This Pump To Extract Water, Gearbox Oil Or Easy Flammable Liquids (Fuel, Petrol Etc).
【Package Included】: 1 X Pump; 1 X Outlet Hose; 1 X Inlet Hose; 4 X Hose Clamps; 2 X Battery Clamps.
【Easy Installation】: You Just Need To Place The Inlet And Outlet Hoses At The Appropriate Positions, Connect The Power Clamps To The Car Battery And Press The Button. This Process Is Very Simple And You Can Often Do It By Yourself To Ensure Your Engine Runs Smoothly..
Features
- Specificaiton : Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
- Easy Installation : you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- Ideal Equipment For : Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- Package Included : 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 4 x Hose Clamps; 2 x Battery Clamps
- WARNING : This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPTOOL
Dimensions: 3.50 x 10.00 x 7.90 inches | Weight: 1.86 Pounds
See On Amazon #12
Vevitts 80w Oil Change Pump Extractor 12V Motor Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat
Asin: B09MPZGD2B | Model: YZ012 | PartNumber: YZ012
【Premium Quality】We Use Pure Copper For Motors.Good Conductivity, Corrosion Resistance And Rust Resistance, Effectively Avoid Leakage Or Short Circuit. Instead Of Manual Operation, It Can Help You Change Oil Quickly And Cleanly Without Lying Under The Car. It Is An Ideal Oil Change Pump Extractor Equipment. Efficient, Fast And Labor-Saving..
【Wide Application】Portable And Small Oil Pumps Are Needed By Everyone, Simple Operation Does Not Need To Spend Too Much Time To Practice, Widely Used In Motorcycles, Car, Scooters, Boat, Quad Bikes, Trucks, Ship, Forklifts, Marine,Power Generation Machinery, Tractors, Lawn Mowers And Various Machinery To Change The Oil..
【Complete Diesel Change Pump Kit】The Oil Transfer Pump Is Mini But Powerful. With 4.6Ft Outlet Tube & 4Ft Inlet Tube, The 8.2Ft Long Battery Clamps Makes The Extractor Pump Kit Possible For Being Used At Large Range. The 2 Hoops Are Used To Tighten The Tubes To Avoid Oil Spilling..
【12V 80W Oil Extractor Pump】Oil Change Pump, A Great Helper For Quick And Clean Oil Changing And Transfer, All Parameter Is Verified By Multiple Test. Diesel Flow Rate: 3.5L/Min, Engine Oil Flow Rate(40-60℃): 1L/Min, Inlet Tube Length: 1.2M/47.2In, Outlet Tube Length: 1.4M/55.1In, Voltage: 12V, Maximum Current: 5A..
Features
- Instructions for use 1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use; 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.).
- 12V 80w Oil Extractor Pump Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60 ): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A.
- Premium Quality We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly without lying under the car. It is an ideal oil change pump extractor equipment. Efficient, fast and labor-saving.
- Complete Diesel Change Pump Kit The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling.
- Wide Application Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, Car, Scooters, Boat, Quad Bikes, Trucks, Ship, Forklifts, Marine,Power generation machinery, Tractors, Lawn Mowers and various machinery to change the oil.
- See more on Amazon...
Brand: Vevitts | Manufacturer: Vixest Trading Co.,Ltd
Dimensions: 3.90 x 5.20 x 3.10 inches
See On Amazon #13
ReluxGo Oil Pump Primer Tool, Compatible with GM Chevy V6 V8 SBC 350 BBC 454 Small and Big Block Chevy Engines
Asin: B0C694Z2RB | Model: BJS037 | PartNumber: BJS037
Upgrade Design: Thick Shaft Design With Triangle Shaped End For No Slippage. For Use With 3/8" Or 1/2" Chuck Hand Drill..
After-Sales Description:If You Have Any Questions About The Purchased Tool, Please Contact Us In Time, And Your Problems Will Be Solved In Time, We Offer Lifetime Warranty..
Premium Material: This Chevy Oil Pump Primer Tool Is Made Of High-Duty Steel And Aluminum, Heat-Treated, Sturdy And Steady, Corrosion Resistant, Wear Resistant, With Reliable Use And Long Service Life..
Wide Application: This Oil Pump Primer Tool Is Compatible With Sb/Bb Chevy V8 & V6 Engines And All Small And Big Blocks Including Popular Sizes Of 283 307 327 350 355 383 388 396 400 402 406 427 434 454..
Features
- EASY TO USE: Simply slip the primer rod down the distributor shaft hole in the manifold. The bushing seals the oil galley, while the collar centers the rod and covers the hole. Then, you use an ordinary power drill to spin the rod, prime the pump, build oil pressure, and get oil up the passages and onto the camshaft, rockers, and valvetrain.
- WIDE APPLICATION: This oil pump primer tool is compatible with SB/BB Chevy V8 & V6 Engines and all small and big blocks including popular sizes of 283 307 327 350 355 383 388 396 400 402 406 427 434 454.
- UPGRADE DESIGN: Thick shaft design with triangle shaped end for no slippage. For use with 3/8 or 1/2 chuck hand drill.
- PREMIUM MATERIAL: This chevy oil pump primer tool is made of high-duty steel and aluminum, heat-treated, sturdy and steady, corrosion resistant, wear resistant, with reliable use and long service life.
- AFTER-SALES DESCRIPTION:If you have any questions about the purchased tool, please contact us in time, and your problems will be solved in time, we offer lifetime warranty.
- See more on Amazon...
Brand: ReluxGo | Manufacturer: BJS037
Warranty: NO
See On Amazon #14
BIG RED ATFE65R Torin Oil Changer: Manual Convenient Oil Change Pump & Fluid Extractor - No Leaks, No Overfills Automotive Fluids Vacuum Evacuation (Capacity: 6.0L 1.5 Gallons)
Asin: B0CFTSNHDF | Model: ATFE65R | PartNumber: ATFE65R | Ean: 0810104646185 | UPC: 810104646185
Quality Materials: The High Quality Nozzle Head Is Made Of Nitrile Rubber, Which Has Good Corrosion Resistance And Oil Resistivity, And This Oil Pump Extractorcan Can Withstand Temperatures Up To 175 °F (80 ° C).
Wide Use: This Oil Vacuum Pump Extractor Can Be Used In Many Ways. Not Only Can You Pump Most Fluid Types: Engine Oil, Transmission Fluid, Gear Oil, Coolant, And Power Steering Fluid, But You Can Also Pump Fish Tanks And Other Liquids.*Note: Gasoline And Fluids With High Volatility, High Corrosion, High Alkalinity And High Temperature Are Forbidden To Be Used On The Oil Pump Extractor..
No Waste: Big Red Oil Extractor Pump Comes With Tubes Which Have Different Diameters Going Into The Bottom Of Oil Pan. The Fluid Extractor Can Be Used To Remove Fluids From Engine Oil To Brake Fluids. It Has A 6L Reservoir, 5Mm/6Mm/8Mm Dimension Tube To Reach The Very Bottom Of The Reservoir And Suck Up Every Drop Of Oil..
No Oil Leaks: Lightweight Plastic Body, Translucent Material Of This Oil Extractor, Very Clear View Of Interior, Integrated Design To Effectively Avoid Oil Leaks When Using..
Features
- Simple Operation: The manual mode of this big red oil extractor pump is simple to operate, and does not require other equipment to work with. The tube being simply put into the desired liquid, and the fluid extractor connected, which can be operated completely by hand
- No Oil Leaks: Lightweight plastic body, translucent material of this oil extractor, very clear view of interior, integrated design to effectively avoid oil leaks when using.
- Quality Materials: The high quality nozzle head is made of nitrile rubber, which has good corrosion resistance and oil resistivity, and this oil pump extractorcan can withstand temperatures up to 175 F (80 C)
- No Waste: BIG RED Oil extractor pump comes with tubes which have different diameters going into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6L reservoir, 5mm/6mm/8mm dimension tube to reach the very bottom of the reservoir and suck up every drop of oil.
- Wide Use: This oil vacuum pump extractor can be used in many ways. Not only can you pump most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid, but you can also pump fish tanks and other liquids.*Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the oil pump extractor.
- See more on Amazon...
Brand: BIG RED | Manufacturer: Torin
Dimensions: 19.69 x 8.66 x 8.66 inches | Weight: 4.85 pounds
Warranty: 1 Year Limited Manufacturer
See On Amazon #15
Oil Pump Primer Tool Replacement for Chevy V6 V8, GM Small and Big Block Oil Pump Priming Tool - Red
Asin: B0CFKRK8ZG
⬤ Oil Primer Tool Works By Connecting To The Oil Pump Shaft Through The Distributor Hole And Inserting It In An Oil Pump..
⬤ Engine Oil Primer: Thick Shaft Design With Triangle Shaped End For No Slippage. Use With 3/8" Or 1/2" Chuck Hand Drill..
⬤ Sbc Engine Oil Priming Tool: Thick Shaft Design With Triangle Shaped End For No Slippage. Use With 3/8" Or 1/2" Chuck Hand Drill.
⬤ Oil Pump Primer Primes The Lubricating System Of A Rebuilt Engine Prior To Its First Start To Prevent The Damage Of A Dry Start..
Features
- Oil pump primer tool Compatible with all small and big blocks including popular sizes of 283 307 327 350 396 400 402 427 434 454; SB/BB Chevy V8 & Chevy V6 Engines.
- Oil Pump Primer Primes the lubricating system of a rebuilt engine prior to its first start to prevent the damage of a dry start.
- Oil primer tool works by connecting to the oil pump shaft through the distributor hole and inserting it in an oil pump.
- SBC engine oil priming tool: Thick shaft design with triangle shaped end for no slippage. Use with 3/8 or 1/2 chuck hand drill
- Engine oil primer: Thick shaft design with triangle shaped end for no slippage. Use with 3/8 or 1/2 chuck hand drill.
- See more on Amazon...
Brand: GZZTORES | Manufacturer: GZZTorres
See On Amazon #16
Htostar Racing Oil Pump Primer Tool Compatible with Chevy V6 V8 Engines SBC 350 BBC 454 Small Big Block 283 327 305 307 SBC SB & BB
Asin: B0C583Y6PW
【Careful Design】Featuring A Thick And Sturdy Shaft Design With A Triangle-Shaped End, Our Oil Pump Primer Tool Offers No Slippage During Use. It Is Compatible With Both 3/8" Or 1/2" Chuck Hand Drills. The Special Billet Aluminum Sleeve With A Black Oxide Finish Accurately Positions The Shaft And Keeps It From Wobbling, Ensuring Stability And Durability During Use..
【Good Quality】When It Comes To Quality, Our Oil Pump Primer Tool Are Absolutely Top Of The Line. We Are Always Committed To Providing The High Quality Products To Ensure Customer Satisfaction And Loyalty. Every Step Of The Process, From The Selection Of Materials To Production, Is Rigorously Controlled And Tested To Ensure That The Final Product Meets Our High Standards. Our Team Constantly Strives To Improve And Innovate To Ensure That Our Products Are Always At The Forefront..
【Professional-Grade】Oil Pump Primer Tool Lets You Spin The Oil Pump With A Drill Motor, Bringing Up The Oil Pressure And Moving Oil To The Top Of The Engine Prior To Starting It. This Prevents Unnecessary Wear Or Damage To Rotating And Valve Train Components. Rest Assured That Our Oil Pump Primer Will Be An Excellent Addition To Your Collection Of Professional-Grade Tools..
【Wide Compatibility】Oil Pump Primer Tool Is Specially Designed For Compatible With Sb & Bb Chevy V8 & V6 Engines. It Compatible With All Small And Big Blocks, Including Mainstream Sizes Such As 283, 307, 327, 350, 355, 383, 388, 396, 400, 402, 406, 427, 434, And 454..
Features
- Efficient Function The Oil Pump Primer Tool helps prime the lubrication system of a rebuilt engine before starting it up, ensuring smooth and efficient operation. It works by connecting to the oil pump shaft through the distributor hole and inserting it into the oil pump, making it easy and convenient to use.
- Wide Compatibility Oil Pump Primer Tool is specially designed for compatible with SB & BB Chevy V8 & V6 Engines. It compatible with all small and big blocks, including mainstream sizes such as 283, 307, 327, 350, 355, 383, 388, 396, 400, 402, 406, 427, 434, and 454.
- Careful Design Featuring a thick and sturdy shaft design with a triangle-shaped end, our Oil Pump Primer Tool offers no slippage during use. It is compatible with both 3/8 or 1/2 chuck hand drills. The special billet aluminum sleeve with a black oxide finish accurately positions the shaft and keeps it from wobbling, ensuring stability and durability during use.
- Professional-grade Oil Pump Primer Tool lets you spin the oil pump with a drill motor, bringing up the oil pressure and moving oil to the top of the engine prior to starting it. This prevents unnecessary wear or damage to rotating and valve train components. Rest assured that our oil pump primer will be an excellent addition to your collection of professional-grade tools.
- Good Quality When it comes to quality, our Oil Pump Primer Tool are absolutely top of the line. We are always committed to providing the high quality products to ensure customer satisfaction and loyalty. Every step of the process, from the selection of materials to production, is rigorously controlled and tested to ensure that the final product meets our high standards. Our team constantly strives to improve and innovate to ensure that our products are always at the forefront.
- See more on Amazon...
Brand: Htostar Racing | Manufacturer: Htostar Racing
See On Amazon #17
BOURSIN Primer Hand Pump For Zexel Bosch Feed Pump Mitsubishi Fuso Canter Forklift Isuzu Npr Nqr Nkr Nrr FTR FSR FRR FVR Hino UD Komatsu Dozer Caterpillar CAT Excavator
Asin: B077PQ9GN5 | Model: 2447222126 | PartNumber: 2447222126 | Ean: 0713095789339 | UPC: 713095789339
Fit For Zexel Bosch Feed Pump.
M16*1.5.
Engine: 4Be1 4Hg1 4Hf1 6Bd1 6Bg1 6Hh1 6He1 6Hk1 S4q S4s S4e S6s 4D30 4D31 4D32 4D33 4D34 4D35 4D36 6D14 6D15 6D16 6D17 6D22 6D102 6D95 6D125.
Features
- Used for isuzu mitsubishi fuso ud hino komatsu pc200 hitachi ex200 forklift excavator diesel engine
- Engine: 4BE1 4HG1 4HF1 6BD1 6BG1 6HH1 6HE1 6HK1 S4Q S4S S4E S6S 4D30 4D31 4D32 4D33 4D34 4D35 4D36 6D14 6D15 6D16 6D17 6D22 6D102 6D95 6D125
- Fit For Zexel Bosch Feed Pump
- M16*1.5
- See more on Amazon...
Brand: Boursin | Manufacturer: BOURSIN
See On Amazon #18
URLWALL Oil Pump Alignment Tool, Gen V Oil Pump Installation Alignment Guide Kit Tool Cam Swap Guiding Tool, Compatible for Gen V LT1 LT4 LT5 L83 L86 L87 Engines (Red)
Asin: B09KTTP36N | Model: ET005122 | PartNumber: ET005122
Application - Used When Temporarily Removing An Oil Pump (Such As Doing A Cam Swap), Then Re-Installing The Pump. Failure To Properly Align The Oil Pump May Result In Low Oil Pressure Or Pump Failure. This Girdle Allows You To Secure The Pickup Tube Using Both Bolt Holes To Ensure Proper Oil Circulation..
Package Include - 2 Oil Pump Alignment Guide Tools. A New Oil Pump 100% Test Before Shipping. If You Have Any Dissatisfaction With Our Product, Please Let Us Know And We Will Respond Within 24 Hours. We Promise That Made Customer 100% Satisfaction..
Quality - Made Of Premium Aluminum For Perfect Accuracy And Durability, This Aligning Tool Has Great Corrosion Resistance And Harness..
Utilitarian Design - The Factory Oil Pickup Tube On Ls Engines Is Only Secured By One Bolt. This Can Potentially Lead To A Poor Seal On The Oil Pump. Our Aluminum Oil Pump Girdle Solves The Issue By Placing A Clamp On Both Sides Of The Tube, Securely Holding It In Place..
Features
- COMPATIBILITY - The Oil Pump Alignment Tool is compatible for Gen V Lt1 Lt4 Lt5 L83 L86 L87 engines.
- UTILITARIAN DESIGN - The factory oil pickup tube on LS engines is only secured by one bolt. This can potentially lead to a poor seal on the oil pump. Our aluminum Oil pump girdle solves the issue by placing a clamp on both sides of the tube, securely holding it in place.
- APPLICATION - Used when temporarily removing an oil pump (such as doing a cam swap), then re-installing the pump. Failure to properly align the oil pump may result in low oil pressure or pump failure. This girdle allows you to secure the pickup tube using both bolt holes to ensure proper oil circulation.
- QUALITY - Made of premium aluminum for perfect accuracy and durability, this aligning tool has great corrosion resistance and harness.
- PACKAGE INCLUDE - 2 Oil Pump Alignment Guide Tools. A new oil pump 100% test before shipping. If you have any dissatisfaction with our product, Please let us know and we will respond within 24 hours. We promise that made customer 100% satisfaction.
- See more on Amazon...
Brand: URLWALL | Manufacturer: URLWALL
See On Amazon #19
PMD Products OIL Pump Primer Tool 1/4 Hex for use with Ford Engine 289 302 390 428
Asin: B00ASANC0M | Model: 20061 | PartNumber: 20061
For Use With Any Hand Drill. Black Oxide Finish.
Aluminum Bushing To Insert In Manifold For Centering Of Tool.
Triangle Shaped Drive End To Eliminate Drill Chick Slippage.
It Works By Connecting To The Oil Pump Shaft Through The Distributor Hole And Inserting In Oil Pump..
Features
- NOW RETOOLED --Prime lubricating system of rebuilt engines to prevent damage of dry start
- It works by connecting to the oil pump shaft through the distributor hole and inserting in oil pump.
- For use with any hand drill. Black Oxide finish
- Triangle Shaped Drive End to eliminate drill chick slippage
- Aluminum bushing to insert in manifold for centering of tool
- See more on Amazon...
Brand: FORGEMAX | Manufacturer: PMD Products
See On Amazon
Looking For Something Else?
Search