SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving
Asin: B087LYV7S7
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Ardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length, can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any ardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon Similar To SpeTool Extra Long CNC Spiral
#1
SpeTool Compression (up&Down) Spiral Flush Trim Router Bit Solid Carbide 1-1/8 Inch Cutting Length 1/4 Inchs Shank with Bottom Bearing Pattern Router Bit for Woodwoking
Asin: B0B6VJ31NK | Model: SPTL-D1/4-TAC | PartNumber: SPTL-D1/4-TAC
Sharp Efficient. The Flush-Trim Spiral Router Bits Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits.Provide Better Chip Evacuation, Less Heat Buildup, And Cleaner Edges.
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Wide Application. This Flush Trim Bit Can Be Used For Any Flush Trim Situation And Is An Excellent Choice For Pattern Or Template Work.
Compatibility. The Spiral Flush Trim Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Table Mount And Handheld Router With 1/4" Collet.
Smooth Stable. The Router Bearing Bit Uses A Double Ball Bearing Pilot At The Tip To Run Against Your Project Template Ensure Smooth Running.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated..
Features
- SPECIFICATION. Compression flush trim Router Bits 1-1/8" cutting length; 1/4" cutting diameter; 1/4" shank; 3" overall length, can be used on routers with 1/4" collect
- COATING. The new coating provide up to 2.5 times life than the uncoated.
- SHARP EFFICIENT. The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges
- SMOOTH STABLE. The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running
- WIDE APPLICATION. This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work
- COMPATIBILITY. The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4 collet
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #2
SpeTool Down Cut Spiral Router Bit 1/16 inch Cutting Diameter with 1/4 inch Shank End Mill for Woodwork CNC Machine Tools
Asin: B099F43S5K | Model: SP-D1/4-1/16-D-FBA | PartNumber: SP-D1/4-1/16-D-FBA
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/16 Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/16inch cutting diameter, 1/2 inch cutting length, 2 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/16 router bit set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #3
SpeTool 8Pcs Carbide CNC Router Bits Set 1/4 Inch Shank for Woodworking Detail Carving Trimming V Groove Engraving Slotting Mortise
Asin: B08JLB11FV | Model: WD-1 | PartNumber: WD-1
Various Material Fit. This Set Of Router Bit Are Suitable For Aluminum, Copper, Steel, Plywood, Mdf, Hardwood, Softwood, Pvc And Ect..
Specification. Include 8 Pcs Solid Carbide Router Bit With 1/4" Shank Packed In Plastic Box.
Multi-Usage. These Bits Are Suitable For Lettering, Signmaking, Groove And Slots, Mortises, Cycles And Dados, 3D Carving, Can Be Used With Cnc Machine, Hand Hold Router, Table Router And Ect..
Detail Bits. Includes Tapered Bit, Ball Nose Bit, Up/Down Spiral Cnc Router Bit, 60 Degree And 90 Degree V-Groove Bit, O Flute Bit..
Features
- A BEGINNER'S CHOOSE. This set of router bits include various router bit with a low average cost, a must have set for newcomer.
- DETAIL BITS. Includes Tapered bit, Ball Nose bit, up/down Spiral CNC router bit, 60 degree and 90 degree V-groove bit, O flute bit.
- VARIOUS MATERIAL FIT. This set of router bit are suitable for aluminum, copper, steel, plywood, MDF, hardwood, softwood, pvc and ect.
- MULTI-USAGE. These bits are suitable for lettering, signmaking, groove and slots, mortises, cycles and dados, 3D carving, Can be used with CNC machine, hand hold router, table router and ect.
- SPECIFICATION. Include 8 Pcs solid carbide router bit with 1/4 shank packed in plastic box
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #4
SpeTool 1/4 Inch Shank Downcut Spiral Router Bit 1/4 Inch Cutting Diameter 1 inch Cutting Length with Extra Long Life Coating CNC Router Bits End Mill for Woodwork Mortise Slot
Asin: B09DTVQSY3 | Model: SP-D1/4-1/4-D-STaC | PartNumber: SP-D1/4-1/4-D-STaC
Down Cut. Cnc Spiral Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Durable And Precise. This Down-Cut Spiral Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Compatibility. This Cnc End Mill Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable..
Features
- SPECIFICATION. Downcut spiral router bit 1" cutting length; 1/4" cutting diameter; 1/4" shank; 2-1/2" overall length, can be used on routers with 1/4" collect.
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable.
- DOWN CUT. CNC Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- COMPATIBILITY. This CNC End Mill Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- DURABLE AND PRECISE. This down-cut spiral router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #5
SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool
Asin: B09M6T9221 | Model: SPXL-1/4-1/4-U | PartNumber: SPXL-1/4-1/4-U
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length , can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #6
SpeTool Spiral Router Bits Down Cut 1/4 inch Cutting Diameter, 1/4 inch Shank Solid Carbide CNC Bits End Mill for Wood Cut Carving Engraver
Asin: B07NVL6KWT | Model: SP-D1/4-1/4-D | PartNumber: SP-D1/4-1/4-D
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 router bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #7
SpeTool 5Pcs Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank Router Bit Set HRC55 Solid Carbide CNC End Mill for Woodworking Mortise Slot Carving Engraver
Asin: B09PZSMR7T | Model: W04005 | PartNumber: W04005
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bit Set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #8
SpeTool Carbide O Flute Spiral Router Bit 1/8 Inch Cutting Diameter 1/4 Inch Shank with Coating Acrylic Non-Ferrous Metal CNC Milling Cutter
Asin: B0BN5RWQ75 | Model: SP1F-D1/8-SPE-X | PartNumber: SP1F-D1/8-SPE-X
Unique Design. O-Flute Design Spiral Router Bit Ensures Efficient Chip Removal, Reducing Clogging, Providing Smooth Cutting Performance, And Extending Tool Life;.
Wide Application. Perfect For Cnc Routing, Hobbyist Projects, And Sign Making With Plastic And Non-Ferrous Materials..
Durable And Precise. Single Flute Router Bits, High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Applicable Matiarials. Suitable For A Variety Of Materials, Acrylic, Plastic, Aluminum, Copper, And Wood; Used For Carving, Cutting, Slotting, Milling, Hollow Cutting;.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable.
Features
- SPECIFICATION. Spiral Router Bits 3/4" cutting length; 1/8" cutting diameter; 1/4" shank; 2-1/2" overall length, can be used on routers with 1/4" collect;
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable
- UNIQUE DESIGN. O-Flute design spiral router bit ensures efficient chip removal, reducing clogging, providing smooth cutting performance, and extending tool life;
- APPLICABLE MATIARIALS. Suitable for a variety of materials, acrylic, plastic, aluminum, copper, and wood; Used for Carving, Cutting, Slotting, Milling, Hollow Cutting;
- WIDE APPLICATION. Perfect for CNC routing, hobbyist projects, and sign making with plastic and non-ferrous materials.
- DURABLE AND PRECISE. Single flute router bits, high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #9
SpeTool Carbide Spiral Router Bits Up&Down Compression Bit 1/4 X 1 inch Cutting Size with 1/4 inch Shank for Woodwork CNC Router Bit Engraving Carving Mortise Groove Tools
Asin: B086L6MYJ4 | Model: SP-D1/4-1/4-U&D | PartNumber: SP-D1/4-1/4-U&D
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Compression Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece.
Features
- SPECIFICATION. Solid carbide up down router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #10
SpeTool Carbide Compressiom Flush Trim Router Bit Top & Bottom Bearing 1/2 inch Cutting Dia with 1/4 inch Shank Pattern Template Woodworking Tool
Asin: B0C1TSJTXQ
Industrial Quality. The Flush Cut Router Bit Is Made Of Industrial Super-Strength Steel Shank And Solid Tungsten Carbide Cutter With High Hardness And Durable..
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Applicable Matgerials. The Spiral Compression Flush Trim Router Bits Is Perfect For Trimming Particle Board, Chipboard, Mdf, Density Board, Melamine Board, Veneer Plywood(Laminate) And Solid Wood..
Spetool Service. Coming With Storage Case. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Application Equipment. This Flush Trim Bit Can Be Used For Any Flush Trim Situation And Is An Excellent Choice For Pattern Or Template Work, Used On Table Mounted Router And Hand Held Router..
High Performance. This Router Bit Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits. Provide Better Chip Evacuation, Less Heat Buildup, And Cleaner Edges..
Features
- SPECIFICATION. 1 cutting length, 1/2 cutting diameter, 1/4 shank, compression cut, top & bottom bearing.
- HIGH PERFORMANCE. This router bit is sharper and stay sharp longer than conventional flush-trim router bits. Provide better chip evacuation, less heat buildup, and cleaner edges.
- INDUSTRIAL QUALITY. The flush cut router bit is made of Industrial super-strength steel shank and solid tungsten carbide cutter with high hardness and durable.
- APPLICATION EQUIPMENT. This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work, used on table mounted router and hand held router.
- APPLICABLE MATGERIALS. The spiral compression flush trim router bits is perfect for trimming particle board, chipboard, MDF, density board, melamine board, veneer plywood(Laminate) and Solid wood.
- SPETOOL SERVICE. Coming with Storage Case. Good quality, cost-effective, efficient after-sales service, etc.
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #11
SpeTool Extra Long Spiral Router Bit Down Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch OVL HRC55 Solid Carbide End Mill for Wood Cut Carving Engrave
Asin: B091SJV54L | Model: SPLS-D1/4-H1/8-D | PartNumber: SPLS-D1/4-H1/8-D
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/8 Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/8 router bit set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #12
SpeTool 5Pcs Carbide Compression Router Bit Up&Down Cut 1/8 inch Cutting Dia for CNC Mill Machine Wookwork 3D Profile Detail Engraver Carving
Asin: B09R1PG9XF | Model: SP-D1/8-1/8-U&D-STaC | PartNumber: SP-D1/8-1/8-U&D-STaC
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece..
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable..
Features
- SPECIFICATION. Compression cut router bits 3/4" cutting length; 1/8" cutting diameter; 1/8" shank; 1-1/2" overall length, can be used on routers with 1/8" collect.
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable.
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
- COMPATIBILITY. This Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #13
SpeTool Spiral Router Bits Up&Down Compression Bit 1/8 inch Cutting Diameter, 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Carving Engraving Grinding
Asin: B08R55969M | Model: W02004 | PartNumber: W02004
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/8 Compression Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece.
Features
- SPECIFICATION. Solid carbide up down router bits with 1/4inch shank and 1/8inch cutting diameter, 3/4 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/8 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #14
SpeTool Bowl&Tray CNC Router Bits Extra Long (70mm) 1/4 inch Shank 3/4 inch Cutting Diameter with Carbide Tip for Woodworking Router Machine Milling Cutter
Asin: B0C65FCDPD
Compatible Materials: Mainly Use For Cutting Laminate,Mdf,Veneered Plywoods,Composition Materials,Hardwoods, And Softwoods..
Durable : Heat Treated High-Quality Industrial Grade Tungsten Carbide . Ensureing Long-Service Life And Wear Resistance Even In Frequently Daily Use..
Wide Compatibility: The Bowl Router Bit Can Be Used With Hand Held ,Table-Mounted And Cnc Routers..
Application: Carving A Circular Or Oval Shapes On The Wood And Finished With Clean Surface. Ideal For Making Small Bowls, Coin Trays, Jewelry Boxes, Fly And Tackles Box, And More. Great For Gifts And Decor..
Features
- Size: 1/4 Radius, 1/4"Shank, 3/4" Cutting Diameter, 5/8" Cutting Depth, 3"(70mm) Total Length, 2 Flutes
- Application: Carving a circular OR oval shapes on the wood and finished with clean surface. Ideal for making small bowls, coin trays, jewelry boxes, fly and tackles box, and more. Great for gifts and decor.
- Compatible Materials: Mainly use for Cutting Laminate,MDF,Veneered plywoods,composition materials,hardwoods, and softwoods.
- Wide Compatibility: The bowl router bit can be used with hand held ,table-mounted and CNC routers.
- DURABLE : Heat treated high-quality industrial grade tungsten carbide . Ensureing long-service life and wear resistance even in frequently daily use.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #15
SpeTool Upcut Spiral Router Bits Extra Long (4 inch) with 1/2 Inch Shank , 1/2 Cutting Diameter Solid Carbide CNC Router Bits End Mill for Wood Mortises and Cutting Dadoes Carving
Asin: B07V9QP7QP | Model: SPL-D1/2-1/2-U | PartNumber: SPL-D1/2-1/2-U
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/2" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length, can be used on routers with 1/2" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/2 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #16
SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8" Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving
Asin: B085RG6WLD | Model: 4Pcs-D1/8 | PartNumber: 4Pcs-D1/8
Applicable Materials. Spetool Cnc Carving Bits, Suitable For 2D/3D Carving Hard Wood, Plywood, Soft Wood, Oak, Mdf, Aluminum, Alloy Copper And Acrylic Etc..
Durable And Precise. Spetool Tapered End Mills Deliver Exceptional Durability And Precise Results, Even During Demanding Projects(Long Service Life For Sharpen)..
Wide Application. The Cnc Bits With Ball End Perfect For Cnc Engraving Machine, Woodworking, Metal Engraving, Mold Making, Detail Carving, 2D/3D Engaraving, Fine Detail Work;.
2-Flute Design. Tapered Angle Ball Nose End Mill / Cone Cutters, Super Design For Carving And Clearing Edge; Ball Nose And Spiral Design, Ensuring Smooth And Efficient Cutting Through Various Materials.
Features
- SPECIFICATION. 4PCS tool set-2 flute, 0.25/0.5/0.75/1.0MM ball radius, 15MM CL, 1-1/2" OL, 1/8" shank, TiAIN Coated, 55HRC, can be used on routers with 1/8" collect;
- 2-FLUTE DESIGN. Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge; ball nose and spiral design, ensuring smooth and efficient cutting through various materials
- APPLICABLE MATERIALS. SpeTool CNC Carving bits, suitable for 2D/3D carving Hard wood, Plywood, Soft wood, OAK, MDF, Aluminum, Alloy Copper and Acrylic etc.
- WIDE APPLICATION. The cnc bits with ball end perfect for CNC engraving machine, Woodworking, Metal Engraving, Mold Making, detail carving, 2D/3D engaraving, fine detail work;
- DURABLE AND PRECISE. SpeTool tapered end mills deliver exceptional durability and precise results, even during demanding projects(long service life for sharpen).
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 1.50 x 0.12 inches
See On Amazon #17
SpeTool 5Pcs Ball Nose Router Bits 1/8" Cutting Diameter Milling Tool HRC55, 1/8" Shank Up Cut Spiral CNC Tool
Asin: B07S38ZQWD | Model: P2B-1/8 | PartNumber: P2B-1/8
Premium Quality. Made Of High Quality Tungsten Carbide, Precision Edge-Grinding Technology; Long Service Life, Not Easy To Break; Excellent Cutting Results And Enhanced Productivity.
Package Include. 5 Pieces High Quality End Mill Pack In A Individual Plastic Box.
Application. For Cnc, Engraving Machine, Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc; Suitable For Side Milling, End Milling, Finish Machining, Etc..
Specification. Ball Nose, 2-Flute, Hrc55 With Tialn Coated.
Features
- SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
- SPECIFICATION. Ball nose, 2-flute, HRC55 with tialn coated
- PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
- APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
- PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 1.50 x 0.13 Inches
See On Amazon #18
SpeTool 2 Flutes 1/4 inch Shank, Extra Long(3 inches) Carbide End Mill TiAlN Coated HRC55 Spiral UpCut CNC Bits
Asin: B07NWGM4DJ | Model: P2EL-D1/4 | PartNumber: P2EL-D1/4
For Cnc,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Route Bit Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Flat Top With 2-Flute, Material: Hrc55 Carbide With Tialn Coated.
Features
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
- Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 3.00 x 0.25 Inches
See On Amazon #19
SpeTool Compression Spiral Router Bits 1/2 Shank with TAC Extreme Tool Life Coateding, Extra Long 5 Inch Overall Length, 3 Inch Cutting Length, Carbide UP Down CNC Router Bit for Wood Carving Tools
Asin: B0CZKNLR85 | Model: SPXL-D1/2-1/2-TAC | PartNumber: SPXL-D1/2-1/2-TAC
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Durable And Precise. This Extra Long Router Bit Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable..
Features
- SPECIFICATION. Solid carbide up down router bits with 1/2 inch shank and 1/2 inch cutting diameter, 3 inch cutting length, 5 inch for overall length, can be used on routers with 1/2" collect
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable.
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
- DURABLE AND PRECISE. This extra long router bit are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #20
SpeTool 5Pcs Tapered Ball Nose Carving End Mill 1/8 inch Shank 0.25MM Radius (0.5MM Diameter) Tips 3D Woodworking Tool CNC Router Bits
Asin: B08FSZVL1D | Model: W01001 | PartNumber: W01001
Applicable Materials. Spetool Cnc Carving Bits, Suitable For 2D/3D Carving Hard Wood, Plywood, Soft Wood, Oak, Mdf, Aluminum, Alloy Copper And Acrylic Etc..
Durable And Precise. Spetool Tapered End Mills Deliver Exceptional Durability And Precise Results, Even During Demanding Projects(Long Service Life For Sharpen)..
Wide Application. The Cnc Router Bit With Ball End Perfect For Cnc Engraving Machine, Woodworking, Metal Engraving, Mold Making, Detail Carving, 2D/3D Engaraving, Fine Detail Work;.
2-Flute Design. Tapered Angle Ball Nose End Mill / Cone Cutters, Super Design For Carving And Clearing Edge; Ball Nose And Spiral Design, Ensuring Smooth And Efficient Cutting Through Various Materials.
Features
- SPECIFICATION. 5PCS -2 flute, 0.25MM ball radius, 5.12 Single Side Angle 15MM CL, 1-1/2" OL, 1/8" shank, TiAIN Coated, 55HRC, can be used on routers with 1/8" collect;
- 2-FLUTE DESIGN. Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge; ball nose and spiral design, ensuring smooth and efficient cutting through various materials
- APPLICABLE MATERIALS. SpeTool CNC Carving bits, suitable for 2D/3D carving Hard wood, Plywood, Soft wood, OAK, MDF, Aluminum, Alloy Copper and Acrylic etc.
- WIDE APPLICATION. The cnc router bit with ball end perfect for CNC engraving machine, Woodworking, Metal Engraving, Mold Making, detail carving, 2D/3D engaraving, fine detail work;
- DURABLE AND PRECISE. SpeTool tapered end mills deliver exceptional durability and precise results, even during demanding projects(long service life for sharpen).
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 1.50 x 0.12 inches
See On Amazon
Looking For Something Else?
Search