ICT Billet LT Gen V Manual Transmission Spacer .375" 3/8" T56 TR-6060 to L82 L83 L84 L8B 5.3L Truck LT Engine Gen 5 551835-375FL
Asin: B087YM249C | Ean: 0840117201521 | UPC: 840117201521
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Compatible With All Common Transmissions With Sbc Bolt Pattern, T56, Tr-6060, Powerglide, Th350, Th400, 700R4, 4L60e, 4L65e, 4L70e, 4L80e, 6L80e, 6L90e, 8L80e, Etc.
Compatible With All Chevy Sbc, Bbc, Ls1, Lt1 Engines (Gen I, Ii, Iii, Iv, V).
Designed To Be Used With Full Surround Bell Housings..
Features
- Made From 3/8" Thick, Hardened Aluminum
- Designed to be used with full surround bell housings.
- Made In Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum
- Compatible With All Chevy SBC, BBC, LS1, LT1 Engines (Gen I, II, III, IV, V)
- Compatible with All Common Transmissions With SBC Bolt Pattern, T56, TR-6060, Powerglide, TH350, TH400, 700R4, 4L60E, 4L65E, 4L70E, 4L80E, 6L80E, 6L90E, 8L80E, etc
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Weight: 2.46 pounds
See On Amazon Similar To ICT Billet LT Gen V
#1
ICT Billet LS Gen III (3) VALLEY PAN Cover Plate Billet Aluminum Low Profile (No Knock Sensor) LSX LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 Dress Up Engine Cover 551629
Asin: B00MI57EG8 | Model: 551629 | PartNumber: 551629 | Ean: 0682384790045 | UPC: 682384790045
Compatible With All Gen Iii Engine Blocks.
Use With Gasket Part # Ms19328 Or 12558178.
Includes Stainless Steel Bolts As Shown.
Dress Up Your Engine With This Great Looking Low Profile Valley Pan.
Features
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Dress up your engine with this great looking low profile valley pan
- Compatible With All Gen III Engine Blocks
- Includes stainless steel bolts as shown
- Use with gasket part # MS19328 or 12558178
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 19.00 x 6.00 Inches | Weight: 2.42 pounds
See On Amazon #2
ICT Billet LS Oil Port Adapter 1/8" NPT Turbo Oil Feed Plate Turbocharger Supply LS1 LSX LS3 LQ4 LQ9 LR4 LS6 L33 LS2 LH6 L92 L76 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551608
Asin: B00LV4IJSY | Model: 10 | PartNumber: 10 | Ean: 0682384790069 | UPC: 682384790069
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Includes Re-Usable Oring Seal And Mounting Hardware.
Heavy Duty, 1/2" Thick Billet Aluminum Plate For Maximum Oil Circulation.
Compatible With All Ls Oil Pans (Except Dry Or Front Sump).
Features
- Conveniently add a 1/8" NPT oil supply for your turbocharger
- Compatible with all LS oil pans (except dry or front sump)
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Heavy duty, 1/2 thick billet aluminum plate for maximum oil circulation
- Includes re-usable oring seal and mounting hardware
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 0.80 x 6.10 x 3.90 inches | Weight: 0.18 Pounds
See On Amazon #3
ICT Billet LS Engine Swap M12 1.5 Adapter to 3/8 NPT Extended Length Coolant Temperature Sensor Adapter Water LS Engine Swap LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 551179L
Asin: B019S76KPO | Ean: 0656729843024 | UPC: 656729843024
Made In Wichita, Ks From Aerospace Grade, Usa Billet Aluminum.
Adapters Are Sold Individually, And Include 1 Sealing Washer.
This Adapter Will Fit All Ls Series Engines..
Adapter Has A Female 3/8" Npt Port, 1.7" Deep. Refer To Thread Chart To Check Your Correct Fitting Size. (Use Pn# 551179 For .85" Deep Adapter For Shorter Sensors).
Features
- Factory LS cylinder heads are machined with metric M12-1.5 coolant sensor ports, so your factory Small Block Chevy sensor won't thread in to them. This adapter allows you to keep your original sensors and integrate them into your swapped LS engine.
- Adapter has a female 3/8 NPT port, 1.7 deep. Refer to thread chart to check your correct fitting size. (Use PN# 551179 for .85 deep adapter for shorter sensors)
- Made in Wichita, KS from aerospace grade, USA billet aluminum
- This adapter will fit all LS series engines.
- Adapters are sold individually, and include 1 sealing washer
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 5.20 x 2.90 inches
See On Amazon #4
ICT Billet USA Bolts KIT ONLY LS LT Exhaust Manifold/Header Flange Bolts LS1 LS3 LS2 LSX ICT LM7 LR4 LQ4 LS6 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 LT1 551696
Asin: B00NY4VCEW | Ean: 0656729842515 | UPC: 656729842515
Zinc Coated For Long Lasting Corrosion Protection And Prevents Threads From Seizing.
All Ict Billet Metric Flange Bolts Are Custom Made For Us, Right Here In The Usa!!.
No Washers Needed With These Flanged Headed Jis Spec Bolts.
Heavy Duty, High Strength, Grade 10.9 Bolts.
Features
- Made in the USA bolts
- Heavy duty, high strength, grade 10.9 bolts
- Zinc coated for long lasting corrosion protection and prevents threads from seizing
- No washers needed with these flanged headed JIS spec bolts
- All ICT Billet metric flange bolts are custom made for us, right here in the USA!!
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 3.00 x 3.00 inches
See On Amazon #5
ICT Billet Oil Pressure Sensor Relocation Adapter Port LS LSX M16-1.5 Sending Unit LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Designed & Manufactured in the USA 551534
Asin: B00NY4VJL8 | Model: 5864173063 | PartNumber: 5864173063 | Ean: 0656729845349 | UPC: 656729845349
M16-1.5 Threaded Port.
Included In The Package Is 1 Adapter, 1 O-Ring, Required Mounting Hardware.
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Compatible With Ls Series Gm V8 Engines (Except Gto Front Sump Oil Pans And Ls4 Oil Pans).
Features
- This plate allows the factory LS sending unit to be moved to the side of the oil pan
- Compatible with LS series GM V8 engines (EXCEPT GTO front sump oil pans and LS4 oil pans)
- M16-1.5 threaded port
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Included in the package is 1 adapter, 1 o-ring, required mounting hardware
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.70 x 6.10 x 3.70 Inches | Weight: 0.20 pounds
See On Amazon #6
ICT Billet LS Idler Pulley Relocation Bracket for LS1 Intake Swap LQ4 LQ9 LSX 4.8L 5.3L 6.0L Truck Bracket Alternator Power Steering 551353 Billet Aluminum Made in USA 551353
Asin: B00YD899IO | Model: 551353 | PartNumber: 551353 | Ean: 0656729843536 | UPC: 656729843536
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Natural Finish Aluminum, Includes Hardware..
Belt Routing Will Change. Requires Belt #780K6 For 105 Amp Alternators And #787K6 For High Output Alternators.
Will Require Modification Of Factory Bracket For Intake Manifold Clearance. Trim As Needed For Your Intake..
Features
- This bracket moves the idler pulley over and down, between the alternator and power steering pulleys, to allow LS1 intake manifolds to be used with truck accessory brackets.
- Will require modification of factory bracket for intake manifold clearance. Trim as needed for your intake.
- Made in Wichita, Kansas from Aerospace Grade, USA Produced, Billet Aluminum
- Belt routing will change. Requires belt #780K6 for 105 amp alternators and #787K6 for high output alternators
- Natural finish aluminum, includes hardware.
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.50 x 4.60 x 5.60 inches
See On Amazon #7
ICT Billet - Billet Low Mount LS Alternator Bracket and Power Steering Pump Bracket - Compatible with LS1 Camaro Z28, Firebird Formula Trans Am WS6 LSX LS1 LS6 551669-2
Asin: B01N6V44YM | Ean: 0730792484572 | UPC: 730792484572
Compatible With Any Ls Series Engine Block And Heads.
Includes 2 Brackets.
Mounts The Alternator And Power Steering In 4Th Gen Ls1 Original Location.
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Features
- Low mount alternator bracket and head mounted power steering bracket
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Compatible with any LS series engine block and heads
- Mounts the alternator and power steering in 4th gen LS1 original location
- Includes 2 brackets
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 2.50 x 9.50 x 6.50 Inches
See On Amazon #8
ICT Billet LS Oil Cooler Bypass Plate for Gen III IV Series Engines LS1 LSX LS3 LQ4 LQ9 LR4 LS6 L33 LS2 LH6 L92 L76 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 Port 551621Z
Asin: B089631RX9 | Ean: 0840117201828 | UPC: 840117201828
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Compatible With All Ls Oil Pans (Except Dry Or Front Sump).
Heavy Duty, 1/2" Thick Billet Aluminum Plate For Maximum Oil Circulation.
Used To Bypass The Engine Oil Cooler When Swapping An Engine.
Features
- 1/2" Thick Heavy Duty Aluminum Allows More Oil To Flow Through The Engine Internally
- Used to Bypass the engine oil cooler when swapping an engine
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Heavy duty, 1/2 thick billet aluminum plate for maximum oil circulation
- Compatible with all LS oil pans (except dry or front sump)
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
See On Amazon #9
ICT Billet LS Gen 4 Valley Pan Cover Plate Low Profile Carb Lifter LSX LS3 DOD Billet Aluminum Engine Lifter Area Oil Cover Compatible with Chevy Gen IV 551646
Asin: B00NY4TOTC | Ean: 0682384790847 | UPC: 682384790847
Compatible With Gen Iv Engine Blocks; Ls2 Ls7 Lh6 L92 L76 Ly2 Ly5 Ly6 Lc9 Lfa Lh8 Lmg Ls3 L98 L9h L20 L94 Lz1 L99 L96 Lc8 L77.
Includes Stainless Steel Bolts.
Machined Aluminum Finish.
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Features
- Dress up your engine with this great looking billet aluminum valley cover
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Compatible with Gen IV Engine Blocks; LS2 LS7 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77
- Machined aluminum finish
- Includes stainless steel bolts
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.10 x 20.60 x 6.50 Inches
See On Amazon #10
ICT Billet LS Engine Swap M12 1.5 Adapter to 3/8 NPT Coolant Temperature Sensor Water LS1 LSX LS3 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 551179
Asin: B015NG418C | Model: 551179 | PartNumber: 551179 | Ean: 0656729846810 | UPC: 656729846810
Made In Wichita, Ks From Aerospace Grade, Usa Billet Aluminum.
Adapters Are Sold Individually, And Include 1 Sealing Washer.
This Adapter Will Fit All Ls Series Engines..
Adapter Has A Female 3/8" Npt Port, .85" Deep. Refer To Thread Chart To Check Your Correct Fitting Size..
Features
- Factory LS cylinder heads are machined with metric M12-1.5 coolant sensor ports, so your factory Small Block Chevy sensor won't thread in to them. This adapter allows you to keep your original sensors and integrate them into your swapped LS engine.
- Adapter has a female 3/8 NPT port, .85 deep. Refer to thread chart to check your correct fitting size.
- Made in Wichita, KS from aerospace grade, USA billet aluminum
- This adapter will fit all LS series engines.
- Adapters are sold individually, and include 1 sealing washer
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 2.60 x 3.10 Inches
See On Amazon #11
ICT Billet LS LT Engine Block Coolant Water Threaded Drain Plug LSX LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551282
Asin: B014TNPBE8 | Ean: 0656729846643 | UPC: 656729846643
Comes With Pre-Applied With Thread Sealant.
Includes 1 Coolant Drain Plug.
Compatible With All Gm Gen Iii, Iv, & V, Ls And Lt Series Engine Blocks.
Made From High Quality Brass For Corrosion Resistance.
Features
- Coolant drain plug for lower engine block
- Made from high quality brass for corrosion resistance
- Comes with Pre-Applied with Thread Sealant
- Compatible with all GM Gen III, IV, & V, LS and LT series engine blocks
- Includes 1 coolant drain plug
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.20 x 3.10 x 3.90 inches
See On Amazon #12
ICT Billet LS Billet Alternator Bracket Low Mount Compatible with Chevy Corvette American Made CNC Machined Aluminum 5.7L 6.0L 6.2L LS1 LSX LS3 LS2 LS6 551667-1
Asin: B01601ODQY | Model: 551667-1 | PartNumber: 551667-1 | Ean: 0730792487092 | UPC: 730792487092
Compatible With: All Gm Ls Series Engines.
Billet Alternator Bracket Low Mount.
Includes Brackets And Mounting Hardware.
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Features
- Compatible with Corvette Or CTSV/G8/SS Crank Pulley
- Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum
- Compatible with: all GM LS series engines
- Includes brackets and mounting hardware
- Billet Alternator Bracket Low Mount
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 0.25 x 10.00 x 6.00 Inches
See On Amazon #13
ICT Billet 2014-up LT L83 L86 LT1 Billet Engine Swap Bracket SBC Conversion Motor Mount Plate Gen V Adapter Small Block 551363X
Asin: B07HY4TZMK | Ean: 0657814752221 | UPC: 657814752221
Includes: 2 Adapter Plates, 8 Flat Head Bolts, And 6 Flange M10-1.5 Bolts.
Natural Aluminum Finish.
Made With Oem Specifications For The Best Possible Fitment Into Your Vehicle.
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Features
- Engine Mount Brackets
- Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum
- Includes: 2 adapter plates, 8 flat head bolts, and 6 flange M10-1.5 bolts
- Made with OEM specifications for the best possible fitment into your vehicle
- Natural aluminum finish
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 12.10 x 6.20 inches
See On Amazon #14
ICT Billet Oil Pressure Sensor Adapter Port - For Gen 4 LS Valley Pan - M16-1.5 Sending Unit 551623
Asin: B00NY51K52 | Ean: 0682384790014 | UPC: 682384790014
Includes Adapter Bolts And Oring.
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
M16-1.5 Thread.
Compatible With All Years Factory Ls Oil Pressure Sensors.
Features
- Compatible with Gen 4 LS Engines
- Compatible with all years factory LS oil pressure sensors
- Includes Adapter Bolts and Oring
- M16-1.5 thread
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.60 x 6.30 x 3.80 inches | Weight: 0.22 Pounds
See On Amazon #15
ICT Billet LS Engine Swap M16 1.5 Adapter to 1/8 NPT Oil Pressure Sensor LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551172
Asin: B015NFNC10 | Model: 5864172859 | PartNumber: 5864172859 | Ean: 0656729842867, 7258006778208 | UPC: 656729842867
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Sold Individually With 1 Sealing Washer.
Compatible With: All Gm Ls Series Engines.
1/8" Npt Taper Pipe Thread Port In The Rear Of The Fitting Allows For Common Sensors Or Plumbing Fittings..
Features
- This adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine. Seals to the block with a sealing washer.
- 1/8 NPT taper pipe thread port in the rear of the fitting allows for common sensors or plumbing fittings.
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Compatible with: all GM LS Series Engines
- Sold individually with 1 sealing washer
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.10 x 4.30 x 2.90 Inches
See On Amazon #16
ICT Billet LS Truck OEM Location Alternator/Power Steering Bracket LQ4 LQ9 4.8L 5.3L 6.0L 551777
Asin: B07D1C59D7 | Ean: 0657814750913 | UPC: 657814750913
Compatible With A Saginaw Type 1 Power Steering Pump.
Includes Brackets Idler Pulley And Mounting Hardware.
Compatible With Any Ls Powered Vehicle Alternators With Any Amperage.
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Features
- Compatible With Truck SUV or LS3 L99 Camaro Crank Pulley
- Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum
- Compatible with a Saginaw Type 1 power steering pump
- Compatible with any LS Powered Vehicle Alternators with any Amperage
- Includes Brackets idler pulley and Mounting Hardware
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
See On Amazon #17
ICT Billet LS1 Adjustable Throttle Cable Bracket For 102mm Fabricated Aftermarket Sheet Metal Intake Cathedral Port Designed and Manufactured in USA Billet Aluminum 551446
Asin: B01DV3D9Q4 | Ean: 0656729844465 | UPC: 656729844465
Made In Wichita, Kansas With Aerospace Grade, Usa Produced, Billet Aluminum.
Includes Support Bracket, 2 - Front Cable Brackets, All Mounting Hardware.
Compatible With All Sheet Metal Intakes Including Holley Sniper.
Allows For Standard Throttle Body Placement, Or For Upside Down Throttle Body Placement To Gain More Hood Clearance.
Features
- Easily allows you to install a throttle cable onto your sheet metal intake manifold
- Allows for standard throttle body placement, or for upside down throttle body placement to gain more hood clearance
- Made in Wichita, Kansas with aerospace grade, USA produced, billet aluminum
- Compatible with all sheet metal intakes including Holley Sniper
- Includes support bracket, 2 - front cable brackets, all mounting hardware
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 0.50 x 11.80 x 4.90 inches
See On Amazon #18
ICT Billet LS Stacked Coolant Steam Crossover Tube for 3 Bolt DBC DBW Gen 3 Throttle Body Stainless Steel Braided Hose Kit LS1 LSX LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 551675
Asin: B07BQXVZHL | Model: 551675 | PartNumber: 551675 | Ean: 0797822586491 | UPC: 797822586491
Made In Wichita, Kansas From Aerospace Grade, Usa Produced Billet Aluminum.
1/8" Npt Threaded Ports.
Can Be Installed On The Front Or Rear Of The Cylinder Heads.
Passenger Side Port Adapter Has Two 1/8"Npt Ports, Drivers Side Port Adapter Has One 1/8"Npt Port.
Features
- Compatible with all GM LS series engines
- Passenger side port adapter has two 1/8npt ports, drivers side port adapter has one 1/8npt port
- Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum
- Can be installed on the front or rear of the cylinder heads
- 1/8 NPT threaded ports
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 11.00 x 4.00 Inches
See On Amazon #19
ICT Billet LS Master Adapter Set Engine Oil & Coolant Sensor Gauge 1/8 3/8 1/2 NPT LS1 LS3 Compatible with Small Block Big Block Chevy Chevrolet LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 551156
Asin: B075RW533W | Ean: 0730792485524 | UPC: 730792485524
Made In Wichita, Kansas From Aerospace Grade, Usa Produced Billet Aluminum.
Check Out The Ict Billet Store For More Ls Swap Solutions..
Included In This Package Is 6 Different Adapter Fittings For Oil Pressure Or Coolant Temperature Sensors..
This Is A Master Set To Adapt Any Sbc/Bbc (And Aftermarket) Sensors To Fit Into All Ls Series Engines..
Features
- Take out all the guess work and have an adapter for any situation when swapping an LS engine.
- This is a master set to adapt any SBC/BBC (and aftermarket) sensors to fit into all LS series engines.
- Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum
- Included in this package is 6 different adapter fittings for oil pressure or coolant temperature sensors.
- Check out the ICT Billet store for more LS Swap Solutions.
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 2.20 x 5.70 x 3.40 inches
See On Amazon #20
ICT Billet LS Swap Transmission Dipstick Adapter Bracket Compatible with TH400 TH350 4L60E 700R4 2004R 4L80E LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Designed & Manufactured in the USA 551323
Asin: B071FJJM9D | Ean: 0797822587955 | UPC: 797822587955
Made In The Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Ls1 Lm7 Lr4 Lq4 Ls6 L59 Lq9 Lm4 L33 Ls2 Lh6 L92 L76 Ly2 Ly5 Ly6 Lc9 Lfa Lh8 Lmg Ls3 L98 L9h L20 L94 Lz1 L99 L96 Lc8 L77.
Included In The Package Is 1 Adapter Bracket, And 2 Bolts.
Compatible With Th400, Th350, 4L60e, 700R4, 2004R, 4L80e Transmissions.
Features
- This bracket provides the missing bolt hole on the LS engine block that is used on SBC/BBC engines to bolt the dipstick tube to the cylinder head
- Compatible with TH400, TH350, 4L60E, 700R4, 2004R, 4L80E Transmissions
- Made in the Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Included in the package is 1 adapter bracket, and 2 bolts
- LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.30 x 6.20 x 3.70 Inches
See On Amazon
Looking For Something Else?
Search