The ROP Shop | Screw Drive Carriage for Genie 3060L, 3560, 3860, 4560, 4060L Garage Door Opener
Asin: B089QSBW1V | Model: 101484_8 | PartNumber: 101484_8
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Includes - (1) Screw Drive Carriage; Comes As Shown In The First Image.
Easy Diy Replacement, The Screw Drive Carriage Even Has An Arrow Pointing To The Door To Make Sure It Goes On Correctly. We Recommend Using Low Temp Grease When Replacing The Carriage Assembly To Extend Life And Maximize Performance. The Carriage Is Designed To Protect The Screw Drive From Wear And Tear. Refer To Images 4 & 5 For More Installation Information.
The Genie Screw Drive Carriage Assembly With Magnet Has Teeth Inside It That Connect To The Screw Inside The Garage Door Opener Rail. The Carriage Teeth Gripping The Screw Allows For Smooth Operation Of Running The Garage Door Up And Down The Rail. If The Motor On Your Garage Door Opener Is Running And The Screw Drive Is Turning, But The Garage Door Is Not Operating (You May Even Hear A Grinding Or Chattering Noise), Then It Is Time To Replace The Screw Drive Carriage.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Screw Drive Carriage for Genie 3060L, 3560, 3860, 4560, 4060L Garage Door Opener
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Screw Drive Carriage; comes as shown in the first image
- The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage
- Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly. We recommend using low temp grease when replacing the carriage assembly to extend life and maximize performance. The carriage is designed to protect the screw drive from wear and tear. Refer to images 4 & 5 for more installation information
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon Similar To The ROP Shop Screw Drive
#1
Homelite Replaces Himore Complete Outlet Manifold for Pressure Washer Pump, USES 5 Screws in This Manifold, Including O-Rings, Unloader, Outlet Pipe Chemical Injector
Asin: B07DY5R8MD | Ean: 0036663576965 | UPC: 036663576965
Outlet Pipe.
Chemical Injector Assembly.
Brand: Homelite | Manufacturer: PUMPS-N-MORE
Weight: 1.00 Pounds
See On Amazon #2
The ROP Shop | Water Pump Rebuild Kit for 1980-1983 Evinrude, Johnson 4.5, 7.5 HP Boat Impeller
Asin: B08QND5JMH
Includes - (1) Impeller Assembly, (1) Impeller Housing Cup & Plate, (2) Impeller Housing Gaskets, (2) Grommets, (1) Drive Key, (1) O-Ring & (4) Screws; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Parts Numbers.
Kit Contains All Water Pump Parts Except The Impeller Housing. New Impeller Cup Inserts Into Old Housing.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Water Pump Rebuild Kit for 1980-1983 Evinrude, Johnson 4.5, 7.5 HP Boat Impeller
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Impeller Assembly, (1) Impeller Housing Cup & Plate, (2) Impeller Housing Gaskets, (2) Grommets, (1) Drive Key, (1) O-Ring & (4) Screws; comes as shown in the first image
- Kit contains all water pump parts except the impeller housing. New impeller cup inserts into old housing
- Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple parts numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #3
The ROP Shop | Water Pump Kit for Mercury 115 HP 1150, 115 8051950-8061119 Outboard Impeller
Asin: B092SRGS1X
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: Mercury & Mariner 65 Hp (4 Cylinder) Through V-6 Outboards With Short-Vane Impellers, Mercruiser I/R/Mr/Alpha Drives (S/N 2495186-0D469858).
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Mercury 115 HP 1150, 115 8051950-8061119 Outboard Impeller
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For: Mercury & Mariner 65 HP (4 cylinder) through V-6 outboards with short-vane impellers, MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858)
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #4
The ROP Shop | Power Trim Pump Reservoir for MerCruiser R, MR, Alpha One Transom Sterndrive
Asin: B09VTG5ZJZ
Includes - (1) Power Trim Pump Reservoir, (1) O-Ring Gasket, (1) O-Ring, (1) Bushing, (1) Bolt & (1) Washer; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Power Trim Pump Reservoir For Your Unit. Also, Please Note That This May Replace Multiple Part Numbers.
Durable Polyethylene Plastic. Single Screw, Bottom-Mount Design.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Power Trim Pump Reservoir for MerCruiser R, MR, Alpha One Transom Sterndrive
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Power Trim Pump Reservoir, (1) O-Ring Gasket, (1) O-Ring, (1) Bushing, (1) Bolt & (1) Washer; comes as shown in the first image
- Durable polyethylene plastic. Single screw, bottom-mount design
- Please be sure to check your part or model number to ensure this is the correct power trim pump reservoir for your unit. Also, please note that this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #5
Garage Door Opener 36179R.S, 36179R for Genie Screw Drive Carriage
Asin: B00YP5ATGG | Ean: 7147905889965
Includes - (1) Screw Drive Carriage; Comes As Shown In The First Image.
Easy Diy Replacement, The Screw Drive Carriage Even Has An Arrow Pointing To The Door To Make Sure It Goes On Correctly. We Recommend Using Low Temp Grease When Replacing The Carriage Assembly To Extend Life And Maximize Performance. The Carriage Is Designed To Protect The Screw Drive From Wear And Tear. Refer To Images 4 & 5 For More Installation Information.
The Screw Drive Carriage Assembly With Magnet Has Teeth Inside It That Connect To The Screw Inside The Garage Door Opener Rail. The Carriage Teeth Gripping The Screw Allows For Smooth Operation Of Running The Garage Door Up And Down The Rail. If The Motor On Your Garage Door Opener Is Running And The Screw Drive Is Turning, But The Garage Door Is Not Operating (You May Even Hear A Grinding Or Chattering Noise), Then It Is Time To Replace The Screw Drive Carriage.
Specs - Refer To Images 2 & 3 For More Information.
Features
- Replacement Screw Drive Carriage
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Screw Drive Carriage; comes as shown in the first image
- The screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage
- Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly. We recommend using low temp grease when replacing the carriage assembly to extend life and maximize performance. The carriage is designed to protect the screw drive from wear and tear. Refer to images 4 & 5 for more installation information
- See more on Amazon...
Brand: Tools & More | Manufacturer: Genie
See On Amazon #6
The ROP Shop | Screw Drive Carriage for Genie IS550, IS550/B, IS850, IS900, IS900/B Garage Door
Asin: B089QT6M5S | Model: 101484_20 | PartNumber: 101484_20
Includes - (1) Screw Drive Carriage; Comes As Shown In The First Image.
Easy Diy Replacement, The Screw Drive Carriage Even Has An Arrow Pointing To The Door To Make Sure It Goes On Correctly. We Recommend Using Low Temp Grease When Replacing The Carriage Assembly To Extend Life And Maximize Performance. The Carriage Is Designed To Protect The Screw Drive From Wear And Tear. Refer To Images 4 & 5 For More Installation Information.
The Genie Screw Drive Carriage Assembly With Magnet Has Teeth Inside It That Connect To The Screw Inside The Garage Door Opener Rail. The Carriage Teeth Gripping The Screw Allows For Smooth Operation Of Running The Garage Door Up And Down The Rail. If The Motor On Your Garage Door Opener Is Running And The Screw Drive Is Turning, But The Garage Door Is Not Operating (You May Even Hear A Grinding Or Chattering Noise), Then It Is Time To Replace The Screw Drive Carriage.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Screw Drive Carriage for Genie IS550, IS550/B, IS850, IS900, IS900/B Garage Door
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Screw Drive Carriage; comes as shown in the first image
- The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage
- Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly. We recommend using low temp grease when replacing the carriage assembly to extend life and maximize performance. The carriage is designed to protect the screw drive from wear and tear. Refer to images 4 & 5 for more installation information
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #7
Garage Door Screw Drive Carriage Replacement for Genie 39179R-S, 36179R.S Opener
Asin: B01LGSJLAE | Model: 842 | PartNumber: 842 | Ean: 0717927517398 | UPC: 717927517398
Includes - (1) Screw Drive Carriage; Comes As Shown In The First Image.
Easy Diy Replacement, The Screw Drive Carriage Even Has An Arrow Pointing To The Door To Make Sure It Goes On Correctly. We Recommend Using Low Temp Grease When Replacing The Carriage Assembly To Extend Life And Maximize Performance. The Carriage Is Designed To Protect The Screw Drive From Wear And Tear. Refer To Images 4 & 5 For More Installation Information.
This Assembly With Magnet Has Teeth Inside It That Connect To The Screw Inside The Garage Door Opener Rail. The Carriage Teeth Gripping The Screw Allows For Smooth Operation Of Running The Garage Door Up And Down The Rail. If The Motor On Your Garage Door Opener Is Running And The Screw Drive Is Turning, But The Garage Door Is Not Operating (You May Even Hear A Grinding Or Chattering Noise), Then It Is Time To Replace The Screw Drive Carriage.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Garage Door Screw Drive Carriage Replacement for Genie 39179R-S, 36179R.S Opener
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Screw Drive Carriage; comes as shown in the first image
- This assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage
- Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly. We recommend using low temp grease when replacing the carriage assembly to extend life and maximize performance. The carriage is designed to protect the screw drive from wear and tear. Refer to images 4 & 5 for more installation information
- See more on Amazon...
Brand: Opener Systems | Manufacturer: Opener Systems
See On Amazon #8
The ROP Shop | Water Pump Kit for Mercury 150 HP 2.5L 1B227000 & Up Outboard Impeller Rebuild
Asin: B092SQZRRR
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: Mercury & Mariner 65 Hp (4 Cylinder) Through V-6 Outboards With Short-Vane Impellers, Mercruiser I/R/Mr/Alpha Drives (S/N 2495186-0D469858).
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Mercury 150 HP 2.5L 1B227000 & Up Outboard Impeller Rebuild
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For: Mercury & Mariner 65 HP (4 cylinder) through V-6 outboards with short-vane impellers, MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858)
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #9
The ROP Shop | Steering Sector/Pinion Gear Kit for John Deere LA100, LA105, LA110, LA115 Mower
Asin: B094WCBQR8 | Model: 101654_18 | PartNumber: 101654_18
Includes - (1) Steering Sector Gear, (1) Steering Pinion Gear, (1) Bushing, (2) Screws, (1) Washer, (3) Lock Nuts & (2) Steering Shaft Bushings; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Steering Repair Kit For Your Unit. Also, Please Note This May Replace Multiple Parts Numbers.
This Kit Is For/Fits John Deere 102, 105, 107S, 115, 125, 135, 145, 155C, 190C, 92H, D100, D105, D110, D120, D125, D130, D140, D150, D160, D170, La100, La105, La110, La115, La120, La125, La130, La135, La140, La145, La150, La155, La165, La175, X110, X120, X125, X130r, X135r, X140, X145, X155r, X165 Lawn Tractors.
Specs - Sector Gear Dimensions: 8 1/2" Diameter. 11/16" Inner Diameter. 5 5/8" Length. 5/16" Thickness. Pinion Gear Dimensions: 11 Teeth. 1" Height. 1 3/8" Outside Diameter. Shaft Bushings Dimensions: 1 1/8" Diameter Without Tabs (1 5/16" With Tabs). 5/8" Inner Diameter. 7/8" Height. Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Steering Sector/Pinion Gear Kit for John Deere LA100, LA105, LA110, LA115 Mower
- Specs - Sector Gear Dimensions: 8 1/2 Diameter. 11/16 Inner Diameter. 5 5/8 Length. 5/16 Thickness. Pinion Gear Dimensions: 11 Teeth. 1 Height. 1 3/8 Outside Diameter. Shaft Bushings Dimensions: 1 1/8 Diameter without Tabs (1 5/16 with tabs). 5/8 Inner Diameter. 7/8 Height. Refer to image 2 for more information
- Includes - (1) Steering Sector Gear, (1) Steering Pinion Gear, (1) Bushing, (2) Screws, (1) Washer, (3) Lock Nuts & (2) Steering Shaft Bushings; comes as shown in the first image
- This kit is for/fits John Deere 102, 105, 107S, 115, 125, 135, 145, 155C, 190C, 92H, D100, D105, D110, D120, D125, D130, D140, D150, D160, D170, LA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175, X110, X120, X125, X130R, X135R, X140, X145, X155R, X165 Lawn Tractors
- Please be sure to check your part or model number to ensure this is the correct steering repair kit for your unit. Also, please note this may replace multiple parts numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #10
The ROP Shop | Water Pump Kit for Mercury 150 HP XR6 0D082000-0G760299, 0G960500-1B2269990 Boat
Asin: B09LR4T6BF
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For Mercury & Mariner 4 Cylinder & 6 Cylinder Outboards With Short-Vane Impellers, Mercruiser R/Mr/Alpha Drives.
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Mercury 150 HP XR6 0D082000-0G760299, 0G960500-1B2269990 Boat
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For Mercury & Mariner 4 cylinder & 6 cylinder outboards with short-vane impellers, MerCruiser R/MR/Alpha drives
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #11
The ROP Shop | Water Pump Kit for Sierra 18-3517, 183517, 18-3116, 183116, 18-3017, 183017 Boat
Asin: B092SN85R2
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: Mercury & Mariner 65 Hp (4 Cylinder) Through V-6 Outboards With Short-Vane Impellers, Mercruiser I/R/Mr/Alpha Drives (S/N 2495186-0D469858).
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Sierra 18-3517, 183517, 18-3116, 183116, 18-3017, 183017 Boat
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For: Mercury & Mariner 65 HP (4 cylinder) through V-6 outboards with short-vane impellers, MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858)
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #12
The ROP Shop | Screw Drive Carriage for Genie GXL1000CL, H4000, H4000A, H6000 Garage Doors
Asin: B089QSR6M2 | Model: 101484_17 | PartNumber: 101484_17
Includes - (1) Screw Drive Carriage; Comes As Shown In The First Image.
Easy Diy Replacement, The Screw Drive Carriage Even Has An Arrow Pointing To The Door To Make Sure It Goes On Correctly. We Recommend Using Low Temp Grease When Replacing The Carriage Assembly To Extend Life And Maximize Performance. The Carriage Is Designed To Protect The Screw Drive From Wear And Tear. Refer To Images 4 & 5 For More Installation Information.
The Genie Screw Drive Carriage Assembly With Magnet Has Teeth Inside It That Connect To The Screw Inside The Garage Door Opener Rail. The Carriage Teeth Gripping The Screw Allows For Smooth Operation Of Running The Garage Door Up And Down The Rail. If The Motor On Your Garage Door Opener Is Running And The Screw Drive Is Turning, But The Garage Door Is Not Operating (You May Even Hear A Grinding Or Chattering Noise), Then It Is Time To Replace The Screw Drive Carriage.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Screw Drive Carriage for Genie GXL1000CL, H4000, H4000A, H6000 Garage Doors
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Screw Drive Carriage; comes as shown in the first image
- The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage
- Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly. We recommend using low temp grease when replacing the carriage assembly to extend life and maximize performance. The carriage is designed to protect the screw drive from wear and tear. Refer to images 4 & 5 for more installation information
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #13
The ROP Shop | Water Pump Kit for Engineered Marine Products EMP 46-00090, 4600090 Impeller
Asin: B092SQ2DZY | Model: EMP 46 90 | PartNumber: EMP 46 90
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: Mercury & Mariner 65 Hp (4 Cylinder) Through V-6 Outboards With Short-Vane Impellers, Mercruiser I/R/Mr/Alpha Drives (S/N 2495186-0D469858).
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Engineered Marine Products EMP 46-00090, 4600090 Impeller
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For: Mercury & Mariner 65 HP (4 cylinder) through V-6 outboards with short-vane impellers, MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858)
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
Dimensions: 5.50 x 5.50 x 5.50 inches
See On Amazon #14
The ROP Shop | Gear Lube Monitor Reservoir for 1988-1989, 1993-1994 MerCruiser Bravo Sterndrive
Asin: B096YKJY28
Includes - (1) Gear Lube Bottle Assembly With Bracket, (1) Strap, (1) Clip, (2) Screws & (2) Washers; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Gear Lube Bottle For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: 1988-1998 Mercruiser Alpha, Bravo Sterndrives.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Gear Lube Monitor Reservoir for 1988-1989, 1993-1994 MerCruiser Bravo Sterndrive
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Gear Lube Bottle Assembly with Bracket, (1) Strap, (1) Clip, (2) Screws & (2) Washers; comes as shown in the first image
- Fits/For: 1988-1998 MerCruiser Alpha, Bravo sterndrives
- Please be sure to check your part or model number to ensure this is the correct gear lube bottle for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #15
The ROP Shop | Water Pump Kit for Mercury MerCruiser 46-73804A3, 4673804A3, 73804A3 Rebuild
Asin: B092ST14PP
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: Mercury & Mariner 65 Hp (4 Cylinder) Through V-6 Outboards With Short-Vane Impellers, Mercruiser I/R/Mr/Alpha Drives (S/N 2495186-0D469858).
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Mercury MerCruiser 46-73804A3, 4673804A3, 73804A3 Rebuild
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For: Mercury & Mariner 65 HP (4 cylinder) through V-6 outboards with short-vane impellers, MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858)
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #16
The ROP Shop | Water Pump Kit for Mercury 150 HP XR-2 4868998-0A904645 Outboard Motor Impeller
Asin: B09LR727VH
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For Mercury & Mariner 4 Cylinder & 6 Cylinder Outboards With Short-Vane Impellers, Mercruiser R/Mr/Alpha Drives.
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Mercury 150 HP XR-2 4868998-0A904645 Outboard Motor Impeller
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For Mercury & Mariner 4 cylinder & 6 cylinder outboards with short-vane impellers, MerCruiser R/MR/Alpha drives
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #17
The ROP Shop | Water Pump Kit for Mercury MerCruiser 46-60367A 1, 4660367A1, 60367A1 Impeller
Asin: B092SS4PTL
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: Mercury & Mariner 65 Hp (4 Cylinder) Through V-6 Outboards With Short-Vane Impellers, Mercruiser I/R/Mr/Alpha Drives (S/N 2495186-0D469858).
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for Mercury MerCruiser 46-60367A 1, 4660367A1, 60367A1 Impeller
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For: Mercury & Mariner 65 HP (4 cylinder) through V-6 outboards with short-vane impellers, MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858)
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #18
The ROP Shop | Water Pump Rebuild Kit for 1990 Evinrude, Johnson 6 HP E6RLESR, E6RESR Impeller
Asin: B08QN9R64K
Includes - (1) Impeller Assembly, (1) Impeller Housing Cup & Plate, (2) Impeller Housing Gaskets, (2) Grommets, (1) Drive Key, (1) O-Ring & (4) Screws; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Parts Numbers.
Kit Contains All Water Pump Parts Except The Impeller Housing. New Impeller Cup Inserts Into Old Housing.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Water Pump Rebuild Kit for 1990 Evinrude, Johnson 6 HP E6RLESR, E6RESR Impeller
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Impeller Assembly, (1) Impeller Housing Cup & Plate, (2) Impeller Housing Gaskets, (2) Grommets, (1) Drive Key, (1) O-Ring & (4) Screws; comes as shown in the first image
- Kit contains all water pump parts except the impeller housing. New impeller cup inserts into old housing
- Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple parts numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #19
The ROP Shop | Water Pump Kit for SEI 96-206-01K, 9620601K, Mallory 9-48311, 948311 Marine Boat
Asin: B092SQT2F7
Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base To Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; Comes As Shown In The First Image.
Kit Does Not Include Base. Does Not Fit Alpha Gen 2 Or Pre-Alpha Drives. Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Water Pump Kit For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: Mercury & Mariner 65 Hp (4 Cylinder) Through V-6 Outboards With Short-Vane Impellers, Mercruiser I/R/Mr/Alpha Drives (S/N 2495186-0D469858).
Specs - Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Water Pump Kit for SEI 96-206-01K, 9620601K, Mallory 9-48311, 948311 Marine Boat
- Specs - Refer to image 2 for more information
- Includes - (1) Housing, (1) Impeller, (1) Tube Guide, (1) Tube Grommet, (1) Base to Housing Gasket, (1) Wear Plate, (1) Lower Plate Gasket, (1) Upper Plate Gasket, (1) Oil Passage Seal, (2) Drain Screw Gaskets & (5) O-Rings; comes as shown in the first image
- Fits/For: Mercury & Mariner 65 HP (4 cylinder) through V-6 outboards with short-vane impellers, MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858)
- Kit does NOT include base. Does not fit Alpha Gen 2 or Pre-Alpha drives. Please be sure to check your part or model number to ensure this is the correct water pump kit for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #20
The ROP Shop | Primer Solenoid Kit for 1991 Johnson 25 HP J25EEID, J25ELEID, TJ25ELEID Outboard
Asin: B09D85RTMF
Includes - (1) Primer Solenoid, (1) Cover, (1) #8 Ring Terminal, (1) Bullet Terminal, (1) Bullet Terminal Sleeve & (1) Screw; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Fuel Primer Choke Solenoid Assembly For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: 1980-2005 Johnson, Evinrude 9.9 - 300 Hp Marine Engines, 1991-1993 Omc Quiet Rider 90 & 115, 1982-1990 Omc Sea Drive 1.6L - 4.0L Marine Engines.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Primer Solenoid Kit for 1991 Johnson 25 HP J25EEID, J25ELEID, TJ25ELEID Outboard
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Primer Solenoid, (1) Cover, (1) #8 Ring Terminal, (1) Bullet Terminal, (1) Bullet Terminal Sleeve & (1) Screw; comes as shown in the first image
- Fits/For: 1980-2005 Johnson, Evinrude 9.9 - 300 HP marine engines, 1991-1993 OMC Quiet Rider 90 & 115, 1982-1990 OMC Sea Drive 1.6L - 4.0L marine engines
- Please be sure to check your part or model number to ensure this is the correct fuel primer choke solenoid assembly for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon
Looking For Something Else?
Search