Hiram Dual Ring Offset Cantilever Scope Mount with Quick Release and Integrated Recoil Dampeners for Picatinny Rail, 30mm
Asin: B08B3JCGFG
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Long Range: Hit Your Target From Hundreds Of Yards Away Since Our Scope Mount's Tilt Angle Allows You To Zero In Your Gun At A Greater Distance For Precision Long-Range Shooting.
Satisfaction Guaranteed: Our Scope Mount Has Been Rigorously Tested To Improve Effectiveness And Provide The Highest-Quality Firearm Accessory On The Market; We Back These Rifle Attachments With Our Usual Strong Warranty And Friendly 24/7 Customer Service, Ensuring That You'll Enjoy Their Use For Years To Come.
Cantilever Design: Our Monolithic Scope Mount's Cantilever Design Allows You To Position Your Scope Up To 2 Inches Forward For Optimal Eye Relief And Increased Field-Of-View.
Durable Construction: Our Cantilever Mounts Are Constructed From Lightweight And Sturdy Aircraft-Grade 6061-T6 Aluminum Alloy; The Torx Screws Are Also Heat-Treated For Added Stability And Strip Prevention.
Features
- QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple installation and swapping of your scopes
- DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy; the torx screws are also heat-treated for added stability and strip prevention
- LONG RANGE: Hit your target from hundreds of yards away since our scope mount's tilt angle allows you to zero in your gun at a greater distance for precision long-range shooting
- CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and increased field-of-view
- SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the market; we back these rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come
- See more on Amazon...
Brand: Hiram | Manufacturer: Hiram
Weight: 0.37 pounds
See On Amazon Similar To Hiram Dual Ring Offset Cantilever
#1
Vortex Optics Sport Cantilever 30mm Mount - 2-Inch Offset
Asin: B009N24RN2 | Model: CM-202 | PartNumber: CM-202 | Ean: 0638267767611, 0875874004702 | UPC: 875874004702, 638267767611
The Cantilever Ring Mount Positions The Center Of The Riflescope Tube At A Height Of 1.59 Inches (40.39 Mm) From The Base. Weighs 6.7 Ounces..
Backed By Our Unlimited, Unconditional, Lifetime, Vip Warranty. A Fully Transferable Promise To Repair Or Replace Your Item If It Becomes Damaged/Defective. Does Not Cover Loss, Theft, Deliberate Damage Or Cosmetic Damage That Doesn't Hinder Performance..
Aluminum Construction.
The 2-Inch Offset Of This Cantilever Mount Positions The Scope In A Forward Location, Allowing The Correct Eye Relief And Head Placement..
Features
- Use this cantilever mount for mounting 30 mm telescopic sights.
- The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.
- The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
- Aluminum construction
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- See more on Amazon...
First Available: 01/23/2023
Brand: Vortex | Manufacturer: Vortex Optics
Dimensions: 2.29 x 7.49 x 3.69 Inches | Weight: 0.42 pounds
Warranty: Unlimited, unconditional lifetime warranty.
See On Amazon #2
CVLIFE Cantilever Scope Mounts 1 inch, Offset Dual Ring One-Piece Scope Mount, Lightweight Aluminum
Asin: B0CH9RWGHK
Offset Cantilever Mount: Scope Mount Features A 2.4" Forward Extension, Which Can Provide Better Head Placement Flexibly And Find Proper And Correct Eye Relief, Increasing Comfort And Reducing Fatigue, Which Is Important For All-Day Use..
Torx Screws: Strong Torx Screws Allow For Precise Tightening And Reduce Stripping. Comes With Spare 4 Torx Screws, Which Can Be Replaced At Any Time, Increasing Durability And Service Life..
Lightweight Material: This Offset Dual Ring Scope Mount Is Made Of 6061 Aviation Aluminum Material And Weighs Only 5.8 Oz, Which Doesn’T Add Much Extra Weight To You..
Hold Well Zero: Two Screws On Each Side Of The Ring Provide A Sturdy And Recoil-Resistant Grip To Your Scope, With Perfect Alignment Between The Front And Rear Rings. It Has Four Fastening Recoil Lugs For Tight Mounting On The Picatinny Rail, Which Can Hold Your Optic Very Securely..
Features
- 1 Inch Scope Mount: CVLIFE 1" scope mount is suitable for scopes with a diameter of 1", the spacing between the rings is 2.36", the center to base height is 1.57", base length is 3".
- Hold Well Zero: Two screws on each side of the ring provide a sturdy and recoil-resistant grip to your scope, with perfect alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.
- Offset Cantilever Mount: Scope mount features a 2.4 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.
- Lightweight Material: This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesn t add much extra weight to you.
- Torx Screws: Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life.
- See more on Amazon...
Brand: CVLIFE | Manufacturer: CVLIFE
Dimensions: 3.94 x 3.94 x 3.94 Inches
See On Amazon #3
Monstrum Deadlock Series Dual Ring Scope Mount | Offset Cantilever | 30 mm Diameter
Asin: B0CWN8KV5D | Ean: 0810088816789 | UPC: 810088816789
Available In 2 Different Mount Configurations Allowing For Optimum Placement Of Your Optic: Inline Rings And Offset Cantilever Rings. Available In 1 Inch, 30 Mm, And 34 Mm Diameter Configurations..
All Monstrum Products Are Backed By A Lifetime Guarantee.
Mounts To Any Flat Top Picatinny Equipped Rifle With Custom Picatinny Locking Bolts That Slot Seamlessly Into Your Picatinny Rail With Zero Wiggle - Guaranteed To Hold Zero Against The Toughest Of Recoil.
A Lightweight 3.7 Ounces For The Inline Version To 3.9 Ounces For The Long Offset Version- 25% Lighter Than Our Previous Generation Slim Profile Series Scope Mounts.
Features
- All new rigid unibody design with strategically placed lightening cuts to reduce weight
- A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
- Available in 2 different mount configurations allowing for optimum placement of your optic: Inline Rings and Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #4
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter | Black
Asin: B07G2SPBXL | Ean: 0704715312365 | UPC: 704715312365
Mounts To Any Flat Top Picatinny Rail Equipped Rifle.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.31 pounds
See On Amazon #5
Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 30 mm Diameter | Black
Asin: B07MJCVMBY | Ean: 0704715312525 | UPC: 704715312525
Attaches And Detaches Easily Via Integrated Quick Release Mechanism, Without Additional Tools Or Tightening.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes to Picatinny equipped rifles
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.31 pounds
See On Amazon #6
Mizugiwa 1inch /30mm Quick Release Cantilever Weaver Forward Reach Dual Ring Scope Mount
Asin: B01A5IF6EQ | Ean: 0600736993098 | UPC: 600736993098
Built In Weaver Style Rails - Very Handy Fitting Flashlights And Lasers Etc..
Scope Mount With Qick Detach Locks For Picatinny Weaver Rail.
Front Lens Size: Up To 56Mm - This Figure Describes The Maximum Size Of The Objective (Front) Lens..
Comes With 25.4Mm Reducer Inserts So You Can Use This With 30Mm And 25 Mm (1 Inch) Body Tube Scopes..
Features
- Fits 20mm Picatinny Weaver rails
- Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
- Built in Weaver style rails - very handy fitting flashlights and lasers etc.
- Front Lens Size: Up to 56mm - This figure describes the maximum size of the objective (front) lens.
- Scope Mount with Qick Detach Locks for Picatinny Weaver Rail
- See more on Amazon...
Brand: MIZUGIWA | Manufacturer: Mizugiwa (BJ) Co.,Ltd
Weight: 0.41 Pounds
See On Amazon #7
Monstrum Ultralight H-Series Cantilever Offset Picatinny Scope Mount | 1 Inch Diameter | Black
Asin: B082BL86H5 | Ean: 0850004377284 | UPC: 850004377284
Two Inches Of Forward Offset For Flexible Scope Positioning And Optimum Eye Relief.
All Monstrum Mounts And Accessories Come With A Lifetime Warranty.
Uses Hardened Steel Torx Mounting Hardware To Prevent Stripping Of The Bolts.
Hollow Frame Design Weighs In At 5.7 Ounces - 30% Lighter Than Our Previous Generation Scope Mount Models.
Features
- Dual ring scope mount for Picatinny rail platforms for 1 inch tube diameter rifle scopes
- Hollow frame design weighs in at 5.7 ounces - 30% lighter than our previous generation scope mount models
- Two inches of forward offset for flexible scope positioning and optimum eye relief
- Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
- All Monstrum mounts and accessories come with a lifetime warranty
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #8
Monstrum Pro Series 7075 Aluminum Cantilever Scope Mount | 30 mm | Low Profile for LPVOs
Asin: B0BWDML8ZF | Ean: 0810088813887 | UPC: 810088813887
Low Profile Scope Mount Allows For A Tighter Cheek Weld And Provide Closer Alignment Between Your Optic And The Bore Of The Barrel Giving You More Precise Targeting, Particularly At Closer Distances.
All Monstrum Products Are Now Protected By Monstrum’S Lifetime Guarantee.
Low Profile Series Mounts Are Built Specifically For Lpvos Or Scopes With A Smaller Objective Bell And Eyepiece - It Will Not Provide Enough Clearance Over The Receiver For Scopes With An Objective Bell Diameter Of Greater Than 2 Inches. Please Measure The Dimensions Of Your Scope Before Purchasing..
Pro Series Scope Rings Are Treated With A Type Iii Hard Anodized Finish Versus A Type Ii For Previous Generation Scope Rings For Added Protection Against Scratches And Blemishing.
Features
- Monstrum Pro Series scope mounts are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings
- Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing
- Low profile scope mount allows for a tighter cheek weld and provide closer alignment between your optic and the bore of the barrel giving you more precise targeting, particularly at closer distances
- Low Profile Series mounts are built specifically for LPVOs or scopes with a smaller objective bell and eyepiece - it will not provide enough clearance over the receiver for scopes with an objective bell diameter of greater than 2 inches. Please measure the dimensions of your scope before purchasing.
- All Monstrum products are now protected by Monstrum s lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #9
Monstrum Ultralight Razorclaw Dual Ring Scope Mount | Long Forward Offset | 30 mm Diameter
Asin: B0CH1K4PFY | Ean: 0810088815577 | UPC: 810088815577
The Razorclaw Is Offered In 3 Different Mount Configurations Allowing For Optimum Placement Of Your Optic: Inline Rings, Short Forward Offset Rings, And Long Forward Forward Offset Rings. Available For Both 1 Inch And 30 Mm Diameter Rifle Scope Tubes..
All Monstrum Products Are Backed By A Lifetime Guarantee.
Mounts To Any Flat Top Picatinny Equipped Rifle With Custom Picatinny Locking Bolts That Slot Seamlessly Into Your Picatinny Rail With Zero Wiggle - Guaranteed To Hold Zero Against The Toughest Of Recoil.
Lightweight Design, Evolved Over Several Generations Of Monstrum Scope Mount Products, Brings The Weight Down To A Mere 3.7 Ounces For The Inline Version To 3.9 Ounces For The Long Offset Version- 25% Lighter Than Our Previous Generation Slim Profile Series Scope Mounts.
Features
- Next generation of Monstrum Scope Mounts with a new ultra-lightweight design, sleeker more aggressive machining, and more mounting options
- Lightweight design, evolved over several generations of Monstrum scope mount products, brings the weight down to a mere 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
- The Razorclaw is offered in 3 different mount configurations allowing for optimum placement of your optic: Inline Rings, Short Forward Offset Rings, and Long Forward Forward Offset Rings. Available for both 1 inch and 30 mm diameter rifle scope tubes.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.24 pounds
See On Amazon #10
MIZUGIWA 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Mount Telescope
Asin: B06WVHJQT4 | Ean: 0603161960925 | UPC: 603161960925
Heavy Duty - Scope Mount Weight About 8.38Oz.
Riser Mount For Rifles With Picatinny/Weaver Rail, Ring Bases Are Milled As A Single, Tough Unit, And Rear Ring Tops Feature Picatinny Tops For Mounting Additional Accessories.
Mount Provides 2" Of Forward Scope Positioning On The .223 Flat Top Platform.
Front Ring Top And Both Side Feature Picatinny For Mounting Laser Flashlight And Compact Red Dot And So On Accessories.- 1" Rings.
Features
- Fits 20mm Picatinny Weaver rails
- Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1 Rings
- Heavy duty - Scope Mount Weight about 8.38oz
- Mount provides 2 of forward scope positioning on the .223 flat top platform
- Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories
- See more on Amazon...
Brand: MIZUGIWA | Manufacturer: Mizugiwa (BJ) Co.,Ltd
Weight: 0.51 Pounds
See On Amazon #11
Monstrum H-Series Offset Picatinny Scope Rings | 30 mm Diameter
Asin: B089QVYWDB | Ean: 0850017827134 | UPC: 850017827134
High Profile In Height, Giving Your Optic 1 Full Inch Of Rise Above Your Receiver With A See-Through Channel Designed Into The Scope Base Allowing For Simultaneously Use With Flip-Up Iron Sights.
Uses Hardened Steel Torx Mounting Hardware To Prevent Stripping Of The Bolts.
Mount Base Mechanism Comes Equipped With Custom Picatinny Locking Bolts That Slot Seamlessly Into Your Picatnny Rail With Zero Wiggle - Guaranteed To Hold Zero Against The Toughest Of Recoil.
Offset Design With A Full 2 Inches Of Forward Extension, Giving You Maximum Flexibility For Scope Placement And Eye Relief.
Features
- For mounting 30 mm diameter scope tubes to standard Picatinny rail platforms
- Offset design with a full 2 inches of forward extension, giving you maximum flexibility for scope placement and eye relief
- High profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights
- Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #12
CVLIFE Cantilever Scope Mounts, 30mm Scope Mount 1.93" High Profile Offset Dual Ring Scope Mount, Lightweight Aluminum
Asin: B0CJV3JG1Y
Offset Cantilever Mount: Scope Mount Features A 2.4" Forward Extension, Which Can Provide Better Head Placement Flexibly And Find Proper And Correct Eye Relief, Increasing Comfort And Reducing Fatigue, Which Is Important For All-Day Use..
Torx Screws: Strong Torx Screws Allow For Precise Tightening And Reduce Stripping. Comes With Spare 4 Torx Screws, Which Can Be Replaced At Any Time, Increasing Durability And Service Life..
Lightweight Material: This Offset Dual Ring Scope Mount Is Made Of 6061 Aviation Aluminum Material And Weighs Only 5.8 Oz, Which Doesn’T Add Much Extra Weight To You..
Hold Well Zero: Two Screws On Each Side Of The Ring Provide A Sturdy And Recoil-Resistant Grip To Your Scope, With Perfect Alignment Between The Front And Rear Rings. It Has Four Fastening Recoil Lugs For Tight Mounting On The Picatinny Rail, Which Can Hold Your Optic Very Securely..
Features
- 1.93" High Scope Mount 30mm: CVLIFE 30mm scope mount is suitable for scopes with a diameter of 30mm, the ring spacing is 2.36 inch, the centerline height is 1.93 inch.
- Hold Well Zero: Two screws on each side of the ring provide a sturdy and recoil-resistant grip to your scope, with perfect alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.
- Offset Cantilever Mount: Scope mount features a 2.4 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.
- Lightweight Material: This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesn t add much extra weight to you.
- Torx Screws: Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life.
- See more on Amazon...
Brand: CVLIFE | Manufacturer: CVLIFE
See On Amazon #13
Vortex Optics Precision Quick-Release Extended Cantilever 30mm Riflescope Mount - 2-Inch Offset
Asin: B01N9JNDCS | Model: CM-404 | PartNumber: CM-404 | Ean: 0875874007048 | UPC: 875874007048
This Mount Positions The Center Of The Riflescope Tube At A Height Of 1.45 Inches (37 Mm) From The Top Surface Of The Picatinny Base..
Backed By Our Unlimited, Unconditional, Lifetime, Vip Warranty. A Fully Transferable Promise To Repair Or Replace Your Item If It Becomes Damaged/Defective. Does Not Cover Loss, Theft, Deliberate Damage Or Cosmetic Damage That Doesn't Hinder Performance..
The Precision Optic Mount Is Precision Cnc Machined From A Block Of 6061 T6 Aluminum And Finished In Hard Coat Type 3 Mil-Spec Anodized Black For A Rock Hard Lasting Finish. Weighs 8.9 Ounces. Made With Pride In The Usa..
The Offset Of This Cantilever Mount Positions The Scope In A Forward Location, Providing Correct Eye Relief And Head Placement When Used..
Features
- This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a rifle.
- The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used.
- This mount positions the center of the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base.
- The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Weighs 8.9 ounces. Made with pride in the USA.
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- See more on Amazon...
First Available: 01/23/2023
Brand: Vortex | Manufacturer: Vortex Optics
Dimensions: 2.30 x 7.80 x 3.30 Inches | Weight: 0.56 Pounds
Warranty: Unlimited, unconditional, lifetime warranty.
See On Amazon #14
CVLIFE Cantilever Scope Mount 30mm, Lightweight Offset Dual Ring Scope Mount with 2.36'' Ring Space, 1.57'' Center Height
Asin: B0C3VF5JDB
T-15 Torx Screws: The 30Mm Scope Mount Rings Are Secured With T-15 Torx Screws, Known For Their Strength And Durability. Additionally, Four Spare Screws Are Included To Minimize The Impact Of Screw Loss Or Damage..
Specifications: The Mount Features A 2.36'' Ring Spacing, 1.57'' Ring Center Height, 3.15'' Base Length. This Scope Mount Is Not Suitable For The Scope With A Ring Space Of More Than 2.36“..
Tool-Free Base Bolt: The Base Installation Utilizes A Locking Nut, Enabling Tool-Free Assembly And Disassembly, Making It Quicker To Detach Compared To Regular Screws..
Lightweight Hollow Design: The Dual Ring Mount Weighs Only 5.03Oz，It Is Constructed With 6061 Aluminum Alloy, Ensuring Durability While Reducing Weight Through A Hollowed-Out Design..
Features
- Offset Cantilever Mount: The 2'' forward extension provides greater space to adjust the eye relief, making it easy to find a comfortable aiming position.
- Lightweight Hollow Design: The dual ring mount weighs only 5.03oz it is constructed with 6061 aluminum alloy, ensuring durability while reducing weight through a hollowed-out design.
- T-15 Torx Screws: The 30mm scope mount rings are secured with T-15 Torx screws, known for their strength and durability. Additionally, four spare screws are included to minimize the impact of screw loss or damage.
- Tool-Free Base Bolt: The base installation utilizes a locking nut, enabling tool-free assembly and disassembly, making it quicker to detach compared to regular screws.
- Specifications: The mount features a 2.36'' ring spacing, 1.57'' ring center height, 3.15'' base length. This scope mount is not suitable for the scope with a ring space of more than 2.36 .
- See more on Amazon...
Brand: CVLIFE | Manufacturer: CVLIFE
Dimensions: 5.51 x 2.56 x 2.56 inches | Weight: 5.03 ounces
See On Amazon #15
Monstrum Offset Cantilever Dual Ring Scope Mount | 1 inch Diameter | Black | Integrated Level Bubble
Asin: B0CC36NH6Q | Ean: 0810088815034 | UPC: 810088815034
Includes An Integrated Anti-Cant Level Bubble To Check For Level Alignment Of Your Rifle Before Each Shot.
All Monstrum Products Are Backed By A Lifetime Guarantee.
Imperfect Vertical Alignment Of Your Scope When Shooting Introduces Scope Cant Error - Horizontal Drift Of Your Shots Due To Cant. An Anti-Cant Level Bubble Corrects For This Issue, Allowing You To Quickly Ensure For Proper Alignment Of Your Rifle..
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Features
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- Includes an integrated anti-cant level bubble to check for level alignment of your rifle before each shot
- Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant. An anti-cant level bubble corrects for this issue, allowing you to quickly ensure for proper alignment of your rifle.
- All Monstrum products are backed by a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.56 Pounds
See On Amazon #16
Monstrum Offset Cantilever Picatinny Scope Rings | 30 mm Diameter | Black
Asin: B01AB61L1Y | Ean: 0740016797609 | UPC: 740016797609
High Profile In Height, 0.8 Inches From Base Of Mount To Bottom Of Rings.
All Monstrum Tactical Mount And Accessory Products Are Covered By A Lifetime Guarantee.
Available In 1 Inch Diameter And 30 Mm Diameter Sizes.
Mounts To Any Standard Picatinny Rail Mounting Platform | Not Compatible With Weaver Bases.
Features
- Distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from the base and can be mounted in either direction dependent on your preferred scope placement and your mounting system.
- Mounts to any standard Picatinny rail mounting platform | Not compatible with Weaver bases
- High profile in height, 0.8 inches from base of mount to bottom of rings
- Available in 1 inch diameter and 30 mm diameter sizes
- All Monstrum Tactical mount and accessory products are covered by a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.16 pounds
See On Amazon #17
Monstrum MH305 H-Series V2 Hollow Frame Lightweight Offset Picatinny Scope Mount | Flat Dark Earth | 30 mm Diameter
Asin: B087D7JKZW | Ean: 0850004377475 | UPC: 850004377475
Two Inches Of Forward Offset For Flexible Scope Positioning And Optimum Eye Relief.
All Monstrum Mounts And Accessories Come With A Lifetime Warranty.
Uses Hardened Steel Torx Mounting Hardware To Prevent Stripping Of The Bolts.
Hollow Frame Design Weighs In At 4.3 Ounces - 30% Lighter Than Our Previous Generation Scope Mount Models.
Features
- Dual ring scope mount for Picatinny rail platforms available for both 1 inch and 30 mm tube diameter rifle scopes
- Hollow frame design weighs in at 4.3 ounces - 30% lighter than our previous generation scope mount models
- Two inches of forward offset for flexible scope positioning and optimum eye relief
- Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
- All Monstrum mounts and accessories come with a lifetime warranty
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #18
Monstrum Scope Mount with 45 Degree Offset Micro Red Dot Mount | 30 mm Diameter | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots
Asin: B09T2CTJQV | Ean: 0810088810213 | UPC: 810088810213
Micro Red Dot Mount Compatible With Vortex Venom/Viper, Burriss Fastfire 2/3, Truglo Tru-Tec, Utg Micro, And All Docter/Noblex Footprint Pattern Red Dots. Please Refer To Compatibility Chart Before Purchasing..
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Mounts To Any Flat Top Picatinny Rail Equipped Rifle Platform.
45 Degree Offset Micro Red Dot Mount Allows For Mounting Of Secondary Red Dot Sight For Use At Closer Ranges.
Features
- Dual ring scope mount for 30 mm tube scopes tubes with integrated 45 degree offset micro red dot mount
- 45 degree offset micro red dot mount allows for mounting of secondary red dot sight for use at closer ranges
- Micro red dot mount compatible with Vortex Venom/Viper, Burriss Fastfire 2/3, TRUGLO TRU-TEC, UTG Micro, and all Docter/Noblex footprint pattern red dots. Please refer to compatibility chart before purchasing.
- Mounts to any flat top Picatinny rail equipped rifle platform
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.60 pounds
See On Amazon #19
Thorn 30mm / 1 inch Quick Release Cantilever Picatinny Scope Mount QD Lock
Asin: B08JYVHYP8 | Ean: 0608119330041 | UPC: 608119330041
Quick Replease Scope Mount ,Lightweight 6061 Grade Aluminum Construction.
Thorn Cantilever Scope Mount ,Package Include 1 Pair Adapter.
Qd Scope Mount ,Mounts To Any Flat Top Picatinny Rail Equipped Rifle.
Qd Scope Mount,Quick Release Design Allow For Fast Mounting.
Features
- Quick release scope mount ,allow up to 2 inches of forward scope positioning
- QD scope mount,quick release design allow for fast mounting
- Quick replease scope mount ,Lightweight 6061 grade aluminum construction
- QD scope mount ,mounts to any flat top Picatinny rail equipped rifle
- Thorn cantilever scope mount ,package include 1 pair adapter
- See more on Amazon...
Brand: Thorn | Manufacturer: Thorn
See On Amazon
Looking For Something Else?
Search