Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight for Sig Sauer P365 Handgun Pistol, Black
Asin: B08BL6NGGP | Ean: 0640978388436 | UPC: 640978388436
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Delta Rd3-012 Red Dot. Top Load System, No Need To Remove The Sight To Change The Battery. 6 Moa Dot. Come With Protected Cover, Adjustment Wrench, Adjustment Dialing Plate, User Manual, Installation Screws And Picatinny Mounting Plate..
Two Button Adjustments. One Up Arrow And One Down Arrow To Adjust Brightness. Press And Hold Up Arrow For 3 Secs To Power On, And Hold Down Arrow For 3 Secs To Power Off..
1.75" Length X1.25" Width X1.15" Height. Shockproof, Fogproof And Waterproof For 30 Minutes Under 4Ft Water.Feature 1 M.O.A Windage And Elevation Adjustments.
The Handgun Mounting Plate Only Fits Sig Sauer P365 Base Model. It Does Not Fit P365xl Which Is Already Optics Ready. Ade Have A Different Plate Made To Fit P365xl That Allow Ade Rd3 Series And Other Doctor/Vortex Venom Type Red Dot To Be Able To Fit P365xl.
Features
- Comes with a Picaitnny mounting plate. Also comes with ADE all new designed adapter plate is to REPLACE the rear sight for Sig Sauer P365 Handgun
- The handgun mounting plate only fits Sig Sauer P365 base Model. It does NOT fit P365XL which is already Optics Ready. ADE have a different plate made to fit P365XL that allow ADE RD3 series and other Doctor/Vortex Venom type red dot to be able to fit P365XL
- Delta RD3-012 Red dot. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate.
- 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and elevation adjustments
- Two button adjustments. One UP ARROW and one down ARROW to adjust brightness. Press and hold Up Arrow for 3 secs to power on, and hold Down Arrow for 3 secs to power off.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year manufacturer
See On Amazon Similar To Ade Advanced Optics Delta RD3012
#1
ADE Crusader RD3-009 Red Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS) Standard Models and Taurus G3C
Asin: B07TDGJT9Y
This Is Ade's Entry Level Red Dot Origianlly Released In 2014. Over The Years Of Improvement, It Is One Of Best Budget Red Dot For The Quality At This Price Range. We Have Made It More Durable To Withstand Recoil And Improved The Ability To Hold Zero. Designed In Oregon. Starting Jan 2024, This Red Dot Is Shipped With Motion Awake Technology..
5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Dimension: 1.9" Length X1.1" Width X1.0" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Motion Awake Technology. 6 Moa. Powered By A Lithium Cr2032 Battery. Comes With Lens Cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws For Conneting Picactinny Plate, Allen Wrench, Tool, Battery Opener Coin, Battery..
Does Not Fit Glock With Aftermarket Slide With Optic Cut. We Have Made Several Improvements Since It's Initial Release In 2016. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon..
Features
- This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
- This is ADE's entry level red dot origianlly released in 2014. Over the years of improvement, it is one of best budget red dot for the quality at this price range. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon. Starting Jan 2024, this red dot is shipped with Motion Awake Technology.
- Motion Awake Technology. 6 MOA. Powered by a lithium CR2032 battery. Comes with Lens cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws for conneting Picactinny Plate, Allen Wrench, tool, Battery Opener Coin, Battery.
- 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Dimension: 1.9 length x1.1 width x1.0 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 pounds
See On Amazon #2
Ade Advanced Optics Red Dot Sight 45 Degree Offset Mount Compatible With Shield RMS/RMSc/SMS/SMSc, ADE RD3-018 SPIKE, RD3-021 NUWA, Leupold Deltapoint Pro, Holosun 407K/507K,Vortex Venom/Viper Red Dot
Asin: B0B3Q6HQC7 | Model: HM8 | PartNumber: HM8 | Ean: 0640978407731 | UPC: 640978407731
Compatible With Any Red Dot With Footprint Of With Doctor Footprint, Such As Vortex Venom/Viper, Burris Fastfire, Ade Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015 Red Dots.
Compatible With Any Red Dot With Footprint Of Shield Rms/Rmsc Footprint, Such As Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.
Compatible With Any Red Dot With Footprint Of Triijicon Rmr Footprint, Such As Holosun 407C/507C, Ade Rd3-020, Rd3-023..
The Ade Hm8 Optic Mount Attaches To Either Side Of A Picatinny Rail To Accommodate Left Or Right Handed Shooters..
Features
- The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.
- The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.
- Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex Venom/Viper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots
- Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c/507c, ADE RD3-020, RD3-023.
- Compatible with Any red dot with footprint of Shield RMS/RMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.13 pounds
See On Amazon #3
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount-Compatible with Leupold Delta Point Pro, JP Enterprises JPoint, Shield RMS Red Dot Sight.
Asin: B09BDH5Z4G
Designed To Use On Ade Rd3-018 Spike, Shield Rms/Rmsc/Rmsw/Sms And Romeo Zero Red Dot Sights..
Finished In A Matte Black Anodize. Comes With Two Screws.
Also Compatible With Leupold Delta Point Pro, Jp Enterprises Jpoint And Swampfox Sentinel Red Dot Sights. Does Not Compatible With Holosun 407K/507K, User Must Grind(Lots Of Grinding) To Completely Remove/Flat Out The Two Rear Pin To Fit 407K/507K. Ade Has Is Releasing A New Plate Made Specifically For 407K/507K In March 2022.
This Optic Picatinny Mount Made By Ade Is To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- Designed to use on ADE RD3-018 SPIKE, Shield RMS/RMSc/RMSw/SMS and Romeo Zero Red dot sights.
- Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel red dot sights. Does NOT compatible with Holosun 407k/507k, user MUST grind(lots of grinding) to completely REMOVE/Flat out the two rear pin to fit 407k/507k. Ade has is releasing a new plate made specifically for 407k/507k in March 2022
- Finished in a Matte Black Anodize. Comes with two screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #4
ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire
Asin: B01L9734Y6 | Model: glock | PartNumber: glock | Ean: 0710500205576 | UPC: 710500205576
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium), Vortex Venom/Viper, Burris Fastfire, Meopta, Shield, Docter, Insight Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
This Optic Mounting Plate Also Fits Other Red Dot Brands Such As Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not Fit Trijicon Rmr/Holosun/Shield Footprint Red Dots..
The Included Glock Plate Fit Some Other Pistols Such As Canik Tp9sf(Does Not Fit Sfx, Combat, Sa). This Glock Plate Also Fits Taurus Gx4, G3c & G3 With Factory Steel Sights (Does Not Fit Any Other Taurus Models Such As G2/G2c/G3 Without Factory Steel Sight/Tx22/Pt111) Because Those Pistols Made The Rear Sight Dovetail Based On The Glock Rear Sight Dovetail Specifications..
Features
- This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots.
- This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.01 Pounds
See On Amazon #5
ADE RD3-030-PRO Apollo Sensor Activated and 50K Hours Solar Powered Reticle Dot Sight for Springfield Hellcat OSP/PRO,Sig P365XL Spectre Comp,Canik TP9 Elite SC,Mossberg MC2SC,Kimber R7 Mako - 4 MOA
Asin: B0BM56M4W2
The Apollo Pro Is Always Powered On And Features An Auto-Dimming Sensor Which Regulates Proper Dot Brightness Based On Ever Changing Ambient Light Conditions. The Brightness Will Turn High And Low Accordingly To The Environment Brightness. Operates With A Single Cr2032 3V Battery. There Is No Physical On/Off/Brightness Button. The Sensor Does It All..
Comes With The Adjustment Tool, User Manual, Lens Cloth, Red Dot Cover, Cr2032 Battery, Screws. Parallax-Free & Unlimited Eye Relief. Made Of Aircraft Aluminum In Anodized Black Finish With Multi-Coated Lens. Weight Approximately 17.5 Grames(0.61Oz), (Length)1.6" X (Width)1" X (Height).9". The Objective Lens Is 22Mmx16m/0.87"X0.63".
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Ade Apollo Pro Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight..
Equipped With Solar Power That Allows The Red Dot Sight To Continue To Be Powered When Your Battery Is Out. The Battery Life Can Last Up To 50,000 Hours Depending On Settings..
Features
- ADE is introducing all new APOLLO PRO(RD3-030PRO). This ADE APOLO PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint.
- Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.
- The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical on/off/brightness button. The sensor does it all.
- Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.
- Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames(0.61oz), (Length)1.6 x (Width)1 x (Height).9. The objective lens is 22mmx16m/0.87x0.63
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 pounds
Warranty: 1 year manufacturer
See On Amazon #6
ADE Optic Mounting Plate for SW MP 9 Shield EZ and Shield EZ 30 Super Carry Pistols - Compatible with Holosun 407K/507K, Sig Romeo Zero, Shield RMS,ADE Spike/Nuwa/Apollo, CT1550 Red Dot
Asin: B0C7LVPK51 | Model: MP 9 Shield EZ RED DOT PLATE | PartNumber: MP 9 Shield EZ RED DOT PLATE
Also Fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
Comes With Several Pairs Of Screws For Ade, Shield, Holosun, Vortex, Burris Red Dots. The Screws Should Fits Most Of The Listed Red Dot But Not Guaranteed For Every Red Dot. If You Need The Longer/Shorter Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size. Torque Screw To 15Inch/Lb. For Gun Glue, We Recommend To Use Loctite Treadlocker.
Please Notes, This Plate Fits The Rmsc/407K Footprint Red Dots. Those Red Dots Will Need To Use The Two Rear Screw Holes And Will Not Use The Two Align Pegs At The End Corners. Such As Holosun 407K/507K,Vortex Defender Ccw, Hex Wasp, Ade Rd3-018 Spike, Ade Rd3-021 Nuwa, Ade Rd3-030 Apollo, Shield Rms, Sig Romero Zero, Jpoint, Riton 3 Tactix Mprd Ect..
This Plate Fits Vortex Viper/Venom, Ade Rd3-003,Rd3-006, Ade Rd3-009,Rd3-012(And Pro),Rd3-015(And Pro), Rd3-028, Rd3-018 Spike, , Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii,Quicksight 5.0 Vr, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical Minidot,Delta Optical Minidot Ii,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec,Leica Tempus, Makdot, Vector Optics Scrd-19Ii Frenzy,Creative Xp Glasseagle Hd, Hex Dragonfly,Ct Rad Pro, Cyelee Calf V2,Vomz Pilad..
Features
- This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to M&P 9 Shield EZ and Shield EZ 30 Super Carry Pistols by Replacing the Rear Sight with this Optic Mounting Plate.
- This plate fits Vortex Viper/Venom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012(and Pro),RD3-015(and Pro), RD3-028, RD3-018 Spike, , Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec,Leica Tempus, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.
- Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- Please notes, this plate fits the RMSc/407k footprint red dots. Those red dots will need to use the two rear screw holes and will not use the two align pegs at the end corners. Such as Holosun 407k/507k,Vortex Defender CCW, Hex Wasp, ADE RD3-018 Spike, ADE RD3-021 NUWA, ADE RD3-030 Apollo, Shield RMS, Sig Romero Zero, Jpoint, Riton 3 Tactix MPRD ect.
- Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longer/shorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. Torque screw to 15inch/lb. For gun glue, we recommend to use loctite treadlocker
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #7
Ade Advanced Optics Huracan Green Dot Reflex Sight for Handgun - Compatible with Doctor/Venom/Fastfire Red Dot Footprint
Asin: B071JHZXFS | Model: rd3-006A-HURACAN | PartNumber: rd3-006A-HURACAN | Ean: 0640978348652 | UPC: 640978348652
It Is Fits Directly To "Optics Ready" Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided #1 Mount, However The Front Switch Of The Sight Needs To Trim Down 2Mm..
Ade Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight.Rd3-011 Only Fits Trijicon Ftprt.
3 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail..
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.This Green Dot Comes With A Picatinny Mounting Base. Other Handgun Mounting Plates Are Not Included..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.
- It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm.
- 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 pounds
Warranty: 1 year manufacturer
See On Amazon #8
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Vortex Venom/Viper Red Dot Sights
Asin: B08L5K1MWC
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #9
Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM, XDS Pistol
Asin: B087H5GHCR
Fit Ade Rd3-006A(Huracan), Rd3-006B(Cobra), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot..
Hiring A Gunsmith Is Highly Recommended, Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury. Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Instsallation. Including Two Align Pins To Attach To Any Of The Four Corner Holes To Prevent Any Movement..
There Are Two Parts Of This Plate. This Small Dovetail Insert Plate Basically Replaces The Rear Sight Using Two Jam Screws. The Big Plate Uses Two Silver Alignment Pins At 2 Of The 4 Corner Holes For The Optic To Sit In..
It Is Design To For Springfield Non-Osp(Non Optics Ready) Xd/Xds/Xdm Pistols That Do Not Has A Optic Cut. This Plate Is For Replacing Rear Sight. It Also Fits Non-Osp Hellcat. It Does Not Fit 5.25″ Xdm Competition Series. This New Plate Is An Re-Designed Version To Replace The Old E1/E2 Plate For Springfield Xd That Always Need Modification Caused By Incorrect Dovetail Size..
Features
- New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS Pistol. (Does not fit 5.25 XDM competition series)
- It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.
- Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.
- There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.
- Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.05 pounds
See On Amazon #10
Ade Advanced Optics Red Dot Sight Mount Base for Taurus G2C, G2S, G3 Without Factory Steel Sights, PT111 G2, PT140 G2, PT709, PT740 and The TX22 Pistols
Asin: B09BBPDNN6
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.07 pounds
See On Amazon
Looking For Something Else?
Search