Seven Sparta Handle Keeper Compatible with Hi Lift Jack Accessories Handle Bar Protector
Asin: B08CZRTLS4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Corrosion Resistant Material: This Handle Bar Keeper Is Crafted From Durable Rubber, Which Is Rustproof And Solid..
Fit Almost Jack: Fit Most Of Hi-Lift Jacks, Includes Model All-Cast Jack, Cast/Steel Jack, X-Treme Jack, Utv Jack, Patriot Edition Jack, Equipment/Agriculture Jack(Ej-550). Do Not Compatible With Post Popper Jack..
Easily And Quickly Installing Or Removing: This Set Can Be Easily Installed Or Removed Without Any Hassle..
Eliminate Noise & Friction: It Does Eliminate Rattling And Avoids Friction And Rubbing Between The Jack Or Truck Body, No Rattling While Driving..
Features
- HANDLE KEEPER FOR SECURING JACK: this handle bar is a must have item used to keep jack handle in place, when you install the jack in your truck bed or to the side during transportation and storage, especially off roading or on the highway.
- ELIMINATE NOISE & FRICTION: it does eliminate rattling and avoids friction and rubbing between the Jack or truck body, no rattling while driving.
- CORROSION RESISTANT MATERIAL: this handle bar keeper is crafted from durable rubber, which is rustproof and solid.
- EASILY AND QUICKLY INSTALLING OR REMOVING: this set can be easily installed or removed without any hassle.
- FIT ALMOST JACK: fit most of Hi-Lift jacks, includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture Jack(EJ-550). Do not compatible with POST POPPER Jack.
- See more on Amazon...
Brand: SEVEN SPARTA | Manufacturer: Seven Sparta
See On Amazon Similar To Seven Sparta Handle Keeper Compatible
#1
Upgraded Car Cup Holder Expander Adapter with Offset Adjustable Base, Compatible with Yeti 14/24/36/46oz Ramblers, Hydro Flasks 32/40oz, Other Large Bottles Mugs in 3.4"-4.0", 1 Pack
Asin: B09NBKXSLL | Model: NCPB-0 | PartNumber: NCPB-0
Expandable Base For Diameter 2.5"-3.75" Car Centre Console Cup Holder: Car Cup Holder Adapter Comes With A Base That Expands To Fill The Console Cup Holder To Fit Different Vehicles, Such As Motorcycles, Boats, Trucks, Rv's And Golf-Carts. Vehicle Not Recommended: 2019-2023 Rav4, 2009-2018 Forester, 2020-2024 Outback, 2009-2015 Prius..
Large Slot For Mugs: It Is Easy To Remover The Cup Holder From The Slot. And The Cup Holder Has A Base Deep Enough To Provide Great Balance For Your Water Bottle..
Secures Tightly Without Tipping Or Spilling: This Car Drink Cup Holder Built With Solid And Thick Plastic And The Rubber Tabs Around The Top Of The Cup Holder Hold The Cup Firmly In Place Without Tipping Or Spilling When Driving Down The Road..
Fit Most 32 Ounce - 40 Ounce Wide Bottles & Mugs In 3.4"-4": Car Cup Holder Expander Is Big Enough For Oversized Thermoses, It Also Can Work With Most Popular Brands Bottles And Mugs In 3.4"-4" Diameter. Please Measure Your Cup's Diameter Before Ordering, Taking Into Account The Overall Height For Accurate Selection..
Features
- UPGRADE VERSION: Seven Sparta Newest cup holder expander uses a Offsetting Base to avoid the lack of space , two cup holders can be used side by side. Compatible with the gear shifter, center console lid, car dash and other center console buttons.
- FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES & MUGS IN 3.4-4: Car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and mugs in 3.4-4 diameter. Please measure your cup's diameter before ordering, taking into account the overall height for accurate selection.
- EXPANDABLE BASE FOR DIAMETER 2.5-3.75 CAR CENTRE CONSOLE CUP HOLDER: Car cup holder adapter comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts. Vehicle Not Recommended: 2019-2023 RAV4, 2009-2018 Forester, 2020-2024 Outback, 2009-2015 Prius.
- SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car drink cup holder built with solid and thick plastic and the rubber tabs around the top of the cup holder hold the cup firmly in place without tipping or spilling when driving down the road.
- LARGE SLOT FOR MUGS: It is easy to remover the cup holder from the slot. And the cup holder has a base deep enough to provide great balance for your water bottle.
- See more on Amazon...
Brand: SEVEN SPARTA | Manufacturer: Seven Sparta
Dimensions: 6.30 x 4.50 x 3.70 inches
See On Amazon #2
AUJEN Cup Holder Expander for Car - Upgraded Extender Cup Holder w/Offset Option, Adjustable Car Cup Holder Expander, Versatile Car Accessories Large Bottles & Big Drinks
Asin: B0CJR35N59 | Model: US512 | PartNumber: US512
For Large Bottles & Wide Cups: With A Universal Size, This Is A Cup Holder Extender For Car That Is Compatible With Yeti Rambler (20, 26, And 30 Oz), Hydro Flasks (32 And 40 Oz), Nalgenes (30, 32, 38, And 48 Oz), Drinks Between 3.4''-3.8'' W Container, And Most 32-40 Oz Bottles. (Note: It Does Not Fit Rambler 14Oz Mug.).
Large Slot For Mugs: The Generously Sized Slot Measures 3.14'' Deep And 1.18'' Wide, Ideal For Most Travel Mugs, Tumblers, And Large Reusable Water Bottles. The Spacious Center Hole Allows Easy Insertion And Removal Of Bottles While Accommodating Handles. The Cup Holder Has A Base Deep Enough, Measuring 3.54'', To Provide Great Balance And Prevent Tipping Over Your Drinks..
Anti-Slip Coaster & Tabs: With The Silicone Coaster And Pieces Inside The Cup Holders, The Cups And Bottles Can Be Held Securely In Place And Won't Tilt. Never Worry About Splashing Water When Braking Again..
Extendable Base: Aujen Large Cup Holder Adapter For Car Can Be Used In Most Vehicles, Such As Cars, Trucks, Suvs, And Recreational Vehicles. Equipped With An Expandable Base From 2.55'' To 3.75'', The Aujen Cup Holder Expander Can Be Firmly Attached To Different Original Car Cup Holders..
Features
- UPGRADED OFFSETTING FUNCTION: With the innovative offsetting function, you have the flexibility to customize the position of your cup holder. Simply loosen the bolt with the included screwdriver to offset the base up to 2 inches in any direction for a perfect fit and avoid interference with your vehicle's center console, gear shifter, or additional cup holders. Moreover, the adjustable offset design allows you to configure two cup holders side by side, even in tight spaces.
- EXTENDABLE BASE: AUJEN large cup holder adapter for car can be used in most vehicles, such as cars, trucks, SUVs, and recreational vehicles. Equipped with an expandable base from 2.55'' to 3.75'', the AUJEN cup holder expander can be firmly attached to different original car cup holders.
- FOR LARGE BOTTLES & WIDE CUPS: With a universal size, this is a cup holder extender for car that is compatible with Yeti Rambler (20, 26, and 30 oz), Hydro Flasks (32 and 40 oz), Nalgenes (30, 32, 38, and 48 oz), drinks between 3.4''-3.8'' W container, and most 32-40 oz bottles. (Note: it does not fit Rambler 14oz mug.)
- ANTI-SLIP COASTER & TABS: With the silicone coaster and pieces inside the cup holders, the cups and bottles can be held securely in place and won't tilt. Never worry about splashing water when braking again.
- LARGE SLOT FOR MUGS: The generously sized slot measures 3.14'' deep and 1.18'' wide, ideal for most travel mugs, tumblers, and large reusable water bottles. The spacious center hole allows easy insertion and removal of bottles while accommodating handles. The cup holder has a base deep enough, measuring 3.54'', to provide great balance and prevent tipping over your drinks.
- See more on Amazon...
Brand: AUJEN | Manufacturer: Aujen
Dimensions: 6.42 x 4.49 x 4.49 inches
Warranty: Get a full refund if you are not satisfied with this product.
See On Amazon #3
SEVEN SPARTA Charging Cable Holder with Chassis Bracket Compatible with Tesla Model 3 Model Y Model X Model S Charger Cable Organizer Car Accessories Wall Connector (Black)
Asin: B07MKMQZ11 | Model: 5864304163 | PartNumber: 5864304163 | Ean: 0602822982603 | UPC: 602822982603
Extra Chassis Bracket: Different From The Other Charger Holder On The Market, We Also Provide A Extra Mobile Connector Holder To Reduce Additional Wear And Tear On Your Adaptor And Outlet..
Easy & Secure Installation: The Charging Cable Holder Takes Minutes To Install. The Charger Head Fits Tight Enough Into The Slot And There Is A Notch That Prevents It From Sliding Out. Enjoy Worry-Free Shopping With Our 30-Day Warranty. Need Help? Contact Our Customer Service Team..
Safe Abs Material: The Charger Cable Organizer Is Made From High Quality Abs Plastic, Pass Fireproofing Grade Testing. The Bearing Capacity Can Reach Above 30Kg At Least. Prior To Purchasing, We Recommend Confirming The Product's Size And Material..
Keep Your Charging Cable Neatly And Secure: The Cable Organizer Is Much Better Than A Normal Hook. It Does A Good Job Of Keeping The Cable Off Of The Ground, And Protect Your Cable From Falling Down Accidentally..
Features
- COMPATIBLE WITH TESLA MODEL 3/MODEL Y/MODEL X/MODEL S CHARGER: Seven Sparta Charging Cable holder is a perfect holder to hang your charging cable from in the garage.
- KEEP YOUR CHARGING CABLE NEATLY AND SECURE: The cable organizer is much better than a normal hook. It does a good job of keeping the cable off of the ground, and protect your cable from falling down accidentally.
- EXTRA CHASSIS BRACKET: Different from the other charger holder on the market, we also provide a extra mobile connector holder to reduce additional wear and tear on your adaptor and outlet.
- SAFE ABS MATERIAL: The charger cable organizer is made from high quality ABS plastic, pass fireproofing grade testing. The bearing capacity can reach above 30KG at least. Prior to purchasing, we recommend confirming the product's size and material.
- EASY & SECURE INSTALLATION: The charging cable holder takes minutes to install. The charger head fits tight enough into the slot and there is a notch that prevents it from sliding out. Enjoy worry-free shopping with our 30-day warranty. Need help? Contact our customer service team.
- See more on Amazon...
Brand: SEVEN SPARTA | Manufacturer: ZEERKEER
Warranty: 1 year
See On Amazon #4
Seven Sparta Car Cup Holder Expander with Adjustable Base, Compatible with Hydro Flasks 32/40 Ounce, Compatible with Yeti Ramblers 20/26/30 Ounce, Other Bottles in 3.4"-3.8" (Black)
Asin: B07PMHPJJF | Model: CP1210 | PartNumber: CP1210
Secures Tightly Without Tipping Or Spilling: This Car Cup Holder Built With Solid And Thick Plastic And The Rubber Tabs Around The Top Of The Cup Holder Hold The Cup Firmly In Place Without Tipping Or Spilling When Driving Down The Road..
Upgrade Version: Thanks For Our Customers Who Feedback The Problem About The Cup Base. Please Rest Assured That Customer Experience Is Always Our First Consideration. Now We Have Upgraded The Material To Solve This Problem. Please Check The Compatibility Of The Vehicle And The Cup Before Purchasing..
Large Slot For Container With Handles: It Is Easy To Remover The Cup Holder From The Slot. And The Cup Holder Has A Base Deep Enough To Provide Great Balance For Your Water Bottle..
Fit Most 32 Ounce - 40 Ounce Wide Bottles And Diameter 3.4"-3.8": The Car Drink Cup Holder Is Big Enough For Oversized Thermoses, It Also Can Work With Most Popular Brands Bottles And Many Large Fast Food Cups In 3.4"-3.8" Diameter. Please Measure Your Cup's Diameter Before Ordering, Taking Into Account The Overall Height For Accurate Selection. For Cups With A Diameter Exceeding 3.8 Inches, We Recommend Purchasing Our Upgraded Expander..
Features
- EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Seven Sparta car drink cup holder comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts. If your vehicle's cup holder has edge obstructions, we recommend considering our Rubber Base Expander for a perfect fit. Vehicle Not Recommended: 2019-2023 RAV4, 2009-2018 Forester, 2020-2024 Outback, 2009-2015 Prius.
- FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES AND DIAMETER 3.4-3.8: The car drink cup holder is big enough for oversized thermoses, it also can work with most popular brands bottles and many large fast food cups in 3.4-3.8 diameter. Please measure your cup's diameter before ordering, taking into account the overall height for accurate selection. For cups with a diameter exceeding 3.8 inches, we recommend purchasing our Upgraded Expander.
- SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car cup holder built with solid and thick plastic and the rubber tabs around the top of the cup holder hold the cup firmly in place without tipping or spilling when driving down the road.
- LARGE SLOT FOR CONTAINER WITH HANDLES: It is easy to remover the cup holder from the slot. And the cup holder has a base deep enough to provide great balance for your water bottle.
- UPGRADE VERSION: Thanks for our customers who feedback the problem about the cup base. Please rest assured that customer experience is always our first consideration. Now we have upgraded the material to solve this problem. Please check the compatibility of the vehicle and the cup before purchasing.
- See more on Amazon...
Brand: SEVEN SPARTA | Manufacturer: Seven Sparta
See On Amazon #5
Car Cup Holder Expander Adapter (Adjustable) THIS HILL All Purpose Cup Holder Expander for Car with Rubber Fits Less Than 5.51" Large Bottles & Mugs & Foods & Drinks
Asin: B0BQJSY12F | Model: all purpose car cup holder | PartNumber: all purpose car cup holder
Excellent Stability: Height Of The Bracket Of Car Cup Holder Expander We Designed At 8.94Cm, As Well As The Three Pieces Of Bracket Made Thicker, The Wall Of The Bracket Increased Rubber Gasket, Better Enhance The Stability Of Cup Holder Expander For Car In Driving Acceleration, Turning, Not Easy To Fall Off. The Height Lengthening Makes The Cup On The High Side Can Also Be Used Stably..
This Hill Has Been Persistently Studying The Work Of Cup Holder For Car Design, Constantly Absorbing User Suggestions To Optimize The Product Style, Insisting On Providing Car Enthusiasts With Convenient And Practical Products To Accompany You Through A Good And Comfortable Car Life. Brand Guarantee, No Reason To Return Or Exchange..
Base Upgrade: Automotive Cup Holders To Change The Traditional Short Base, Separated Base More Convenient For Users To Install In The Car, Fit Firmly In The Car. Compatible With Tesla Series, Rvs, Trucks, Suvs, Treadmills, Ship, Golf Cart, Sectional Couch Etc..
Multi-Use: Do You Want An All Purpose Cup Holder? The Magic Is That We Can Also Expand The Size Of The Cup Holder With One Hand Rotation, No Need To Pull, Easy To Adjust From 2.56" To 5.51", You Can Put A Variety Of Sizes Of Cups, Drinks, And Even Foods.With It, No Longer Subject To The Limitations Of Only A Single Size Cup, To Meet The New Experience..
Features
- Fine Workmanship: THIS HILL new car cup holder is made of PC as a whole, weighs about 420g. The material is upgraded again and it is strong, so you can experience the value of the product in your hands, and there is a difference with the market.
- Multi-use: Do you want an all purpose cup holder? The magic is that we can also expand the size of the cup holder with one hand rotation, no need to pull, easy to adjust from 2.56 to 5.51, you can put a variety of sizes of cups, drinks, and even foods.With it, no longer subject to the limitations of only a single size cup, to meet the new experience.
- Excellent Stability: height of the bracket of car cup holder expander we designed at 8.94cm, as well as the three pieces of bracket made thicker, the wall of the bracket increased rubber gasket, better enhance the stability of cup holder expander for car in driving acceleration, turning, not easy to fall off. The height lengthening makes the cup on the high side can also be used stably.
- Base Upgrade: automotive cup holders to change the traditional short base, separated base more convenient for users to install in the car, fit firmly in the car. Compatible with Tesla series, RVs, trucks, SUVs, treadmills, ship, golf cart, sectional couch etc.
- THIS HILL has been persistently studying the work of cup holder for car design, constantly absorbing user suggestions to optimize the product style, insisting on providing car enthusiasts with convenient and practical products to accompany you through a good and comfortable car life. Brand guarantee, no reason to return or exchange.
- See more on Amazon...
Brand: This Hill | Manufacturer: This Hill
Dimensions: 3.70 x 6.30 x 3.70 inches
Warranty: WARM TIPS:Maybe you need to Please check it carefully whether your car can be installed with this kind of cup holder before buy it.If there are any problem when using it,please feel free to tell us ,we will give you the best solution in 12 hours.
See On Amazon #6
Car Cup Holder Expander Adapter Adjustable Base, NARUNDREN Compatible for Yeti 20/26/30 oz Hydro Flasks Large 32/40oz, Fits Most Cup Holder, Diameter Bottles in 3.2"-3.8" (1pcs)
Asin: B09YTW5L4N | Model: NRUN-HKDF | PartNumber: NRUN-HKDF | Ean: 0715072398312 | UPC: 715072398312
【Rubber Tabs Securely Hold 3.2"-3.8" Diameter Bottles】The Tabs Are Made From A Proprietary Material Selected To Make It Easy To Insert And Remove Bottles From The Adapter. This Ensures The Adapter Will Not Come Out Of Your Car’S Cup Holder When You Remove The Bottle To Take A Drink.
【Attentive To The Detalls】Please Compare Your Vehicle Cup Holder To This Product Before Purchasing. This Model Works Best In Cylindrical Cup Holders. It Does Not Work Well In Most Square,Oval Or Recessed Cup Holders. Pleas Review The Pictured Product Dimensions And Compare Them To Your Specific Application Before Purchasing..
【Quick Installation】Just Hold The Base And Twist The Top, The Base Will Then Retract Or Expand（8 Cushion Foam Pads In Order Not To Lose Balance, This Car Cup Holder Set Includes Additional Sponge Pads That Can Be Affixed To Its Lower Half To Fill The Gap Between The Cup Holder And The Car's Cup Opening, Improving Stability And Compatibility）.
【Large Slot For Container With Handes】It Is Easy To Remove The Cup Holder From The Slot. And The Cup Holder Has A Base Deep Enough To Provide A Great Balance For Your Water Bottle.
Features
- Extendable Base Insert is expandable from 2.5"-3.75" in diameter to fit many different automotive cupholders. It works great for golf-carts, boats, and trucks, Our extra thick pads on the expanding base ensure the adapter stays securely in your cup holder
- Large Slot For Container With Handes It is easy to remove the cup holder from the slot. And the cup holder has a base deep enough to provide a great balance for your water bottle
- Rubber Tabs Securely Hold 3.2-3.8 Diameter Bottles The tabs are made from a proprietary material selected to make it easy to insert and remove bottles from the adapter. This ensures the adapter will not come out of your car s cup holder when you remove the bottle to take a drink
- Quick Installation Just hold the base and twist the top, the base will then retract or expand 8 cushion foam pads in order not to lose balance, This car cup holder set includes additional sponge pads that can be affixed to its lower half to fill the gap between the cup holder and the car's cup opening, improving stability and compatibility
- Attentive to The Detalls Please compare your vehicle cup holder to this product before purchasing. This model works best in cylindrical cup holders. It does not work well in most square,oval or recessed cup holders. Pleas review the pictured product dimensions and compare them to your specific application before purchasing.
- See more on Amazon...
Brand: NARUNDREN | Manufacturer: NARUNDREN
Dimensions: 6.93 x 4.41 x 4.33 inches
Warranty: not
See On Amazon #7
JOYTUTUS Upgraded Car Cup Holder Expander with Offset Base, Fit for YETI, Hydro Flask, Large Cup Holder Expander for Car Hold 18-40 oz Bottles and Mugs, Other Bottles in 3.4-3.8 inch
Asin: B0B27SJP1X | Model: CP02005 | PartNumber: CP02005
【Excellent Compatibility】Joytutus New Cup Holder Expander Is Suitable For Car Cup Holders With A Diameter Of 2.75-3.25 Inches. It Can Hold Most Popular Brand Bottles Ranging From 18-40 Oz, Such As Hydroflask 32/40Oz, Yeti 20-36Oz, And Nalgene 16-40Oz. (※Tips: Not Compatible With Yeti 14Oz Mug).
【Attention To Detail】Cup Holder Expander Comes With 4 Removable Rubber Tabs That Can Be Adjusted To Fit Your Needs. For Larger Bottles, Such As 32 Oz Hydroflask Bottles, Removing The Tabs Can Provide A Better Experience. For Slimmer Bottles, The Tabs Can Prevent Wobbling While Driving.【Patented Design】.
【Larger U-Shaped Slot For Mugs】Our Cup Holders Feature A Larger U-Shaped Slot That Can Accommodate Cups With Handles Without Tilting Or Splashing. The Bottom Of The Cup Holder Is Equipped With A Rubber Pad To Protect The Cup And Eliminate Noise..
【Upgraded Offset Base】Our Newest Cup Holder Adapter Features An Off-Set Long Base Design That Fits Perfectly With Different Types Of Car Cup Holders. It Is Compatible With Gear Shifters, Center Console Lids, And Car Dashes, Allowing Two Cup Holders To Be Installed Side By Side..
Features
- Easy One-Step Installation JOYTUTUS Cup Holder Expander is designed with an adjustable rubber base for easy installation in your car. Simply aim the expander at the cup holder and insert it in. The base can adapt to various shapes of car cup holders and make installation a breeze.
- Upgraded Offset Base Our newest cup holder adapter features an OFF-SET long base design that fits perfectly with different types of car cup holders. It is compatible with gear shifters, center console lids, and car dashes, allowing two cup holders to be installed side by side.
- Excellent Compatibility JOYTUTUS new cup holder expander is suitable for car cup holders with a diameter of 2.75-3.25 inches. It can hold most popular brand bottles ranging from 18-40 oz, such as Hydroflask 32/40oz, Yeti 20-36oz, and Nalgene 16-40oz. ( Tips: Not Compatible with Yeti 14oz Mug)
- Larger U-shaped Slot for Mugs Our cup holders feature a larger U-shaped slot that can accommodate cups with handles without tilting or splashing. The bottom of the cup holder is equipped with a rubber pad to protect the cup and eliminate noise.
- Attention to Detail Cup Holder Expander comes with 4 removable rubber tabs that can be adjusted to fit your needs. For larger bottles, such as 32 oz Hydroflask bottles, removing the tabs can provide a better experience. For slimmer bottles, the tabs can prevent wobbling while driving. Patented Design
- See more on Amazon...
Brand: JOYTUTUS | Manufacturer: JoyTutus
Dimensions: 11.02 x 4.33 x 4.33 inches
Warranty: 90 Days Warranty since the Date of Purchase
See On Amazon #8
Integral Hydro Expander - Car Cup Holder Expander Organizer with Adjustable Base - Rubber Tabs Hold Most 32 - 40 oz Bottles and Large Cups
Asin: B07R7MDQL9 | Model: CA-1234 | PartNumber: CA-1234
Slot For Coffee Mugs: The 1 Inch Slot Is Integrated Into The Design So Coffee Mugs Will Fit With Ease. This Is Perfect For The Popular Yeti 24Oz Rambler (14Oz Rambler Does Not Fit). Please Compare Dimensions Of Desired Coffee Mug To The Product Dimensions Before Purchasing..
Universal: Fits In Almost Anything With A Cup Holder; Such As Vehicles, Boats, Rv’S, Utv’S, Etc. However, Some Cup Holder Designs Will Not Work. Please Review The Pictured Dimensions To Ensure A Proper Fitment Before Purchasing..
Easy Installation: Just Hold The Base And Twist The Top, The Base Will Then Retract Or Expand. Comes With Instruction Card..
3-Ring Expandable Base: Adjustable Base Has An Expandable Diameter From 2.5"-3.75". This Allows The Adapter To Stay Firmly In Place, Regardless Of How Rough The Terrain Gets. Please Compare Your Vehicle Cup Holder To This Product Before Purchasing. This Model Works Best In Cylindrical Cup Holders. It Does Not Work Well In Most Square Cup Holders Or Cup Holders That Are Recessed Into The Console..
Features
- CUP HOLDER EXPANDER FOR OVERSIZE BOTTLES/MUGS: The 4, rubber tabs keep most oversize (3.4 -3.8 ) bottles or mugs securely in place. Perfect for certain versions of Hydro Flask, YETI, RTIC, Nalgene, CamelBak, Klean Kanteen and more (does not fit 14oz or 46oz YETI Ramblers). Please compare bottle dimensions to provided product dimensions before purchasing.
- 3-RING EXPANDABLE BASE: Adjustable base has an expandable diameter from 2.5-3.75. This allows the adapter to stay firmly in place, regardless of how rough the terrain gets. Please compare your vehicle cup holder to this product before purchasing. This model works best in cylindrical cup holders. It does not work well in most square cup holders or cup holders that are recessed into the console.
- SLOT FOR COFFEE MUGS: The 1 inch slot is integrated into the design so coffee mugs will fit with ease. This is perfect for the popular YETI 24oz Rambler (14oz Rambler does NOT fit). Please compare dimensions of desired coffee mug to the product dimensions before purchasing.
- EASY INSTALLATION: Just hold the base and twist the top, the base will then retract or expand. Comes with instruction card.
- UNIVERSAL: Fits in almost anything with a cup holder; such as vehicles, boats, RV s, UTV s, etc. However, some cup holder designs will not work. PLEASE REVIEW THE PICTURED DIMENSIONS TO ENSURE A PROPER FITMENT BEFORE PURCHASING.
- See more on Amazon...
Brand: Integral | Manufacturer: Natek Technology
Dimensions: 6.25 x 4.50 x 4.50 inches | Weight: 0.59 pounds
Warranty: Manufacturuer warranty up to 365 days after purchase
See On Amazon #9
Smart Kup Car Cup Holder Expander - Fits Hydro Flasks 32/40 oz, Nalgene, Yeti & Large Bottles up to 3.8 inches Wide - for Car up to 3.2 Inches Wide
Asin: B078C7J8ZB | Model: 8542111300 | PartNumber: 8542111300 | Ean: 0611251200011 | UPC: 611251200011
𝗦𝗧𝗔𝗬𝗦 𝗜𝗡 𝗣𝗟𝗔𝗖𝗘 - Built To Stay In Place While Making Turns And Hitting Brakes. Hydroflask Cup Holder For Car Is Engineered With A 3-Inch Upper Cup That Firmly Holds Your Flask. Other Holders Have A 2-Inch Upper Cup Which Makes Your Bottle Prone To Falling Out On Turns..
𝗨-𝗦𝗛𝗔𝗣𝗘 𝗖𝗨𝗧-𝗢𝗨𝗧 - The Car Cup Expander Includes A Slot On The Side To Accommodate Coffee Cups Or Travel Mugs With External Handles And Allow Their Secure Placement. Start Your Journey With Your Favorite Beverages/Bottles While On The Road With The Smart Kup Car Cup Holder..
𝗗𝗨𝗥𝗔𝗕𝗟𝗘 - The Cup Holder Expander Is Constructed With Abs Plastic With A Glossy Finish That Makes It Resistant To Any Impact And Abrasion. It Provides Superior Sturdiness That Fits Into Your Existing Cup Holder To Ensure Bottles And Cups Of Different Sizes Stay Secure In Transit..
𝗙𝗜𝗧𝗦 𝗦𝗡𝗨𝗚𝗟𝗬 - Looking For A Cup Holder That Fits Even In Shallow Cup Holders? Look No Further. Our Drink Holder For Car Has A Tapered Narrow Base That Goes From 3.2" To 2.6" To Provide A Snugger Fit And Fix Your Shallow Cup Holder Issues. No More Rolling Around!.
Features
- - This cup holder expander for car is designed to be compatible with holding the 32/40 oz Hydroflask, 40 oz 50/50 Flask. It is super handy and can work with the most popular brands of bottles & mugs up to 3.8 inches in diameter. It's a perfect cup holder adapter for you.
- - Looking for a cup holder that fits even in shallow cup holders? Look no further. Our drink holder for car has a tapered narrow base that goes from 3.2 to 2.6 to provide a snugger fit and fix your shallow cup holder issues. No more rolling around!
- - Built to stay in place while making turns and hitting brakes. Hydroflask cup holder for car is engineered with a 3-inch upper cup that firmly holds your flask. Other holders have a 2-inch upper cup which makes your bottle prone to falling out on turns.
- - The cup holder expander is constructed with ABS plastic with a glossy finish that makes it resistant to any impact and abrasion. It provides superior sturdiness that fits into your existing cup holder to ensure bottles and cups of different sizes stay secure in transit.
- - - - The car cup expander includes a slot on the side to accommodate coffee cups or travel mugs with external handles and allow their secure placement. Start your journey with your favorite beverages/bottles while on the road with the smart kup car cup holder.
- See more on Amazon...
Brand: SMART KUP | Manufacturer: 808 Innovate
Dimensions: 6.00 x 4.00 x 4.00 inches
See On Amazon #10
Seven Sparta Off-Road Base Compatible with Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage (Red)
Asin: B07HCF5H38 | Model: Seven Sparta-091401 | PartNumber: Seven Sparta-091401 | Ean: 0602822981521 | UPC: 602822981521
Heavy Duty And Easy To Carry: Made Of A Tough Pp Synthetic Material, Better More Than A Chunk Of Wood Will Not Rot Or Break. A Drilled Hole In Center Of Base Attached To Your Jack Bar, Store It Easy.
No-Risk Purchase! Unconditional 30-Day Money-Back Guarantee. If You’Re Unsatisfied With This Item For Any Reason, We’Ll Immediately Refund Your Purchase Price.
One Side With Serrated Teeth: Helps To Scrape At Hard Dirt Or Gravel, To Create A Clean, Flat Surface For The Base To Sit On While In Use.
Alleviate Jack Sinkage On Soft Ground: Used On Soft Ground Like Sand, Mud, Grass. Give The Off-Road Base Better Footing And Greater Stability During The Lifting Process.
Features
- COMPATIBLE WITH MOST HI-LIFT JACKS:Designed and Used for most of Hi-Lift jacks, Includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture Jack(EJ-550). Do not fit for POST POPPER Jack
- ALLEVIATE JACK SINKAGE ON SOFT GROUND: Used on soft ground like sand, mud, grass. Give the Off-Road Base better footing and greater stability during the lifting process
- HEAVY DUTY AND EASY TO CARRY: Made of a tough PP synthetic material, better more than a chunk of wood will not rot or break. A drilled hole in center of base attached to your jack bar, store it easy
- ONE SIDE WITH SERRATED TEETH: Helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use
- NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If you re unsatisfied with this item for any reason, we ll immediately refund your purchase price
- See more on Amazon...
Brand: SEVEN SPARTA | Manufacturer: Seven Sparta
Dimensions: 3.00 x 12.00 x 12.00 inches
See On Amazon #11
EcoNour Cup Holder Expander for Car to Keep Hydro Flasks (32/40 oz), Yeti, Nalgene & Stanley Water Bottles | Large Cup Extender Holder for Car to Carry Drinks | Detachable Car Coffee Mug Adapter
Asin: B097BR3QJW | Model: ECOSMRT01 | PartNumber: ECOSMRT01
Easy To Use: You Don't Need To Spend More Time Placing Your Mug In The Car Cup Holders. You Can Set Your Mugs, Bottles, Or Beverages In The Water Bottle Holder For Car To Prevent Spilling While You Are Driving..
Perfect Companion: Econour’S Cup Holder Adapter For Large Cups Provides Stress-Free Driving Since There Is No Rattling, And The Drink Is Securely Held. Enjoy The Happiness Of Having Your Favorite Beverage Close At Hand With The Drink Holder For Car..
Simple To Add & Remove: The Car Cup Holder Expander’S Narrow Base Can Be Detached, And The Top Adapter Can Be Used Separately For More Oversized Cup Holders. The Expandable Cup Holder For Car Will Be Able To Accommodate The U-Shaped Cutouts With External Handles..
Expandable Cup Holder: The Cup Holder Adapter’S Base Fits Most Cars And Securely Holds Your Drinks. The Big Cup Holder For Car Comes With A Wide Base Of Upto 3.2 Inches And The Bottle Fits Upto 3.8 Inches, Providing A Snug Fit For Most Of The Car's Cup Holders..
Features
- Compatible Beverage Container: EcoNour Hydro flask cup holder for car is made to prevent your cups and bottles from falling if you hit a sudden brake! This cup holder is made of durable ABS plastic, and the base holds cups, bottles, and beverages in place.
- Expandable Cup Holder: The cup holder adapter s base fits most cars and securely holds your drinks. The big cup holder for car comes with a wide base of upto 3.2 inches and the bottle fits upto 3.8 inches, providing a snug fit for most of the car's cup holders.
- Easy to Use: You don't need to spend more time placing your mug in the car cup holders. You can set your mugs, bottles, or beverages in the water bottle holder for car to prevent spilling while you are driving.
- Simple to Add & Remove: The car cup holder expander s narrow base can be detached, and the top adapter can be used separately for more oversized cup holders. The expandable cup holder for car will be able to accommodate the U-shaped cutouts with external handles.
- Perfect Companion: EcoNour s cup holder adapter for large cups provides stress-free driving since there is no rattling, and the drink is securely held. Enjoy the happiness of having your favorite beverage close at hand with the drink holder for car.
- See more on Amazon...
Brand: EcoNour | Manufacturer: EcoNour
Warranty: 365 Days from Date of Purchase
See On Amazon #12
Accmor Universal Car Cup Holder Expander Adapter with Adjustable Base, 2-in-1 Car Cup Holder Expander Organizer Compatible with Hydro Flasks 32/40oz, Yeti 14/24/36/46oz, Large Bottles in 2.2" -3.9"
Asin: B09WXQXPDC | Model: AC8404-Black | PartNumber: AC8404-Black
Upgraded Expandable Base 2.7'' -3.9'': Our Cup Holder Expander For Car With Adjustable Base Diameter 2.7'' -3.9''. It Can Expands To Fill The Console Cup Holder To Fit Different Automobiles. Just Hold The Base And Twist The Top, The Base Will Then Retract Or Expand. Its Strong Compatibility Is Suitable For Most Cars..
Without Tipping Or Spilling : This Car Cup Holder Insert Made Of Solid And Thick Plastic, It Always Stay Firmly In Place. And The Rubber Tabs Around The Top Of The Bottle Holder Hold The Bottle Firmly In Place Without Tipping Or Spilling When Driving Down The Road..
Universal Cup Holder For Car : This Car Drink Holder Expander Comes With A Base That Expands To Fill The Console Cup Holder To Fit Different Vehicles, Such As Automobiles, Motorcycles, Boats, Trucks, Rv's And Golf-Carts. It Can Be An Ideal Gift For Your Friends..
Large Caliber Bottle Organizer : It Works With Most Popular Brands Bottles And Mugs In Max 3.9'' Diameter. Two U-Shaped Grooves Are Designed On Both Sides Of The Cup Holder, Which Is Suitable For Placing Bottles With Handles. It Is Suitable For Travel Mugs, Coffee Cups, Thermos Bottles, Drinks Bottles Etc. It Compatible With Hydro Flasks, Nalgenes, Yeti Bottles And So On..
Features
- 2-In-1 Cup Holder Expander : This 2-in-1 car cup holder with a phone holder, it can load drinks bottles and cell phones at the same time. It keep both your cell phone and drinks within reach.
- Large Caliber Bottle Organizer : It works with most popular brands bottles and mugs in max 3.9'' diameter. Two U-shaped grooves are designed on both sides of the cup holder, which is suitable for placing bottles with handles. It is suitable for travel mugs, coffee cups, thermos bottles, drinks bottles etc. It compatible with Hydro Flasks, Nalgenes, Yeti bottles and so on.
- Upgraded Expandable Base 2.7'' -3.9'': Our cup holder expander for car with adjustable base diameter 2.7'' -3.9''. It can expands to fill the console cup holder to fit different automobiles. Just hold the base and twist the top, the base will then retract or expand. Its strong compatibility is suitable for most cars.
- Universal Cup Holder for Car : This car drink holder expander comes with a base that expands to fill the console cup holder to fit different vehicles, such as automobiles, motorcycles, boats, trucks, RV's and golf-carts. It can be an ideal gift for your friends.
- Without Tipping or Spilling : This car cup holder insert made of solid and thick plastic, it always stay firmly in place. And the rubber tabs around the top of the bottle holder hold the bottle firmly in place without tipping or spilling when driving down the road.
- See more on Amazon...
Brand: Accmor | Manufacturer: Accmor
Dimensions: 6.00 x 4.50 x 4.00 inches | Weight: 0.66 pounds
Warranty: 180 Days Guarantee
See On Amazon #13
SEVEN SPARTA Base Stand & Handle Keeper Compatible with Hi Lift Jack Accessories Handle Bar Protector
Asin: B08CZQHHZD
Eliminate Noise & Friction: Handle Bar Does Eliminate Rattling And Avoids Friction And Rubbing Between The Jack Or Truck Body, No Rattling While Driving..
Heavy Duty & Solid Material: The Jack Stand Is Made Of A Tough Pp Synthetic Material, Better More Than A Chunk Of Wood Will Not Rot Or Break. This Handle Bar Keeper Is Crafted From Durable Rubber, Which Is Rustproof And Solid..
Alleviate Jack Sinkage On Soft Ground: Used On Soft Ground Like Sand, Mud, Grass. Give The Off-Road Base Better Footing And Greater Stability During The Lifting Process.
Handle Keeper For Securing Jack: This Handle Bar Is A Must Have Item Used To Keep Jack Handle In Place, When You Install The Jack In Your Truck Bed Or To The Side During Transportation And Storage, Especially Off-Roading Or On The Highway..
Features
- THIS SET OF HANDLE KEEPER & JACK BASE COMPATIBLE WITH MOST JACKS: Designed and Used for most of jacks, Includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture Jack(EJ-550). Do not fit for POST POPPER Jack.
- HANDLE KEEPER FOR SECURING JACK: this handle bar is a must have item used to keep jack handle in place, when you install the jack in your truck bed or to the side during transportation and storage, especially off-roading or on the highway.
- ELIMINATE NOISE & FRICTION: handle bar does eliminate rattling and avoids friction and rubbing between the Jack or truck body, no rattling while driving.
- ALLEVIATE JACK SINKAGE ON SOFT GROUND: Used on soft ground like sand, mud, grass. Give the Off-Road Base better footing and greater stability during the lifting process
- HEAVY DUTY & SOLID MATERIAL: The Jack stand is Made of a tough PP synthetic material, better more than a chunk of wood will not rot or break. this handle bar keeper is crafted from durable rubber, which is rustproof and solid.
- See more on Amazon...
Brand: SEVEN SPARTA | Manufacturer: Seven Sparta
See On Amazon #14
Humview Cup Holder Expander for car 2 in 1 Multifunctional Car Cup Holder Extender Adapter with Adjustable Base Compatible with Hydro Flask, Yeti, Nalgene, 32/40 oz Large Bottles Drinks Mugs
Asin: B0B6Q3TBB5 | Model: dsb-01 | PartNumber: dsb-01 | Ean: 3497867278630
【Multifunctional Car Cup Holder Design】: Multifunctional Car Cup Holder Can Be Divided Into 2 Cup Holders By Rotating The Upper Holder. The Lower Cup Holder With 3.9" Diameter Wide, Compatible With Hydro Flasks 32/40 Oz, Camelbak 32/40 Oz, Yeti, Nalgenes, Contigo, Tervis, Etc. The Upper Cup Holder Expander Adapter Can Be Extended To 3.9"-5.9", Allows For Larger Water Cups, Thermos, Cell Phones, Food, Ipads, Fried Chicken And Instant Noodles, Etc..
【Quality Assurance Service】: The Upper Bracket With Reinforced Thick Fence Makes It More Durable. If The Dual Car Cup Holder Has Quality Problems Or Is Damaged During Transportation, Please Contact Us In Time, We Will Solve The Problem For You As Soon As Possible..
【Adjustable Base Is More Stable】: The Cup Holder Base Insert Is Expandable From 2.6"-3.35" In Diameter To Fit Most Car Center Console Automotive Cupholders, Works Great For Most Cars, Golf-Carts, Boats, And Trucks. After The Upgrade, The Extended Cup Holder Base Is More Suitable For The Car Cup Slot, Stable And Firm, And Not Easy To Shake..
【Easy To Use And Install】 Insert The Base Into The Car Cup Slot，Rotate The Cup Holder Expander To Expand The Bottom Adapter And Firmly Fixed The Base，This 2-In-1 Car Cup Holder Extender Will Fit Most Models And May Not Be Compatible With Some Cup Holder Styles With Pointed Or Elongated Shapes..
Features
- Enlarge Car Cup Holder Extender Three fences with high quality ABS and redesigned upper cup holder for improved stability and sturdiness. large cup holder adapter for car is big enough compatible with most popular brands bottles and mugs. The cup holder shaft can be rotated 360 , turning one cup slot into two, which can store two beverages at the same time, increasing space utilization for you.
- Easy to Use and Install Insert the base into the car cup slot Rotate the cup holder expander to expand the bottom adapter and firmly fixed the base This 2-in-1 car cup holder extender will fit most models and may not be compatible with some cup holder styles with pointed or elongated shapes.
- multifunctional car cup holder Design : Multifunctional car cup holder can be divided into 2 cup holders by rotating the upper holder. The lower cup holder with 3.9 diameter wide, compatible with Hydro Flasks 32/40 oz, Camelbak 32/40 oz, Yeti, Nalgenes, Contigo, Tervis, etc. The upper cup holder expander adapter can be extended to 3.9-5.9, allows for larger water cups, thermos, cell phones, food, ipads, fried chicken and instant noodles, etc.
- Adjustable base is more stable : The cup holder base insert is expandable from 2.6-3.35 in diameter to fit most car center console automotive cupholders, works great for most cars, golf-carts, boats, and trucks. After the upgrade, the extended cup holder base is more suitable for the car cup slot, stable and firm, and not easy to shake.
- Quality Assurance Service : The upper bracket with reinforced thick fence makes it more durable. If the dual car cup holder has quality problems or is damaged during transportation, please contact us in time, we will solve the problem for you as soon as possible.
- See more on Amazon...
Brand: Humview | Manufacturer: Humview
Dimensions: 10.20 x 4.10 x 5.90 inches
Warranty: Support return
See On Amazon #15
Upgraded Large Cup Holder Expander for Car with Offset Expandable Base Compatible with Yeti Mug10/14oz Yeti Rambler 20/24/26/30/36/46oz Hydro Flasks 32/40oz Other Large Bottles in 3.4"-4" Diameter
Asin: B09GLVQZ1Q | Model: A-111 | PartNumber: A-111
Fit For Large Bottles In 3.4"- 4" Diameter: The Cup Holder Expander Of Upgraded Version Works Perfectly With Bottles, Thermoses, Cups, Mugs Of Most Popular Brands In 3.4’’-4’’ Diameter, Especially For Oversized/Larger One..
Easy To Install: Both The Base And Cup Holder Are Made Of High-Quality Abs, Which Is Sturdy, Durable And Easy To Install. The Extendable Base Allows The Adapter To Stay Firmly In Place. Just Rotate Cup Holder Until Prongs Extend And Tighten Against Your Car's Center Console Cup Holder..
Hold Your Bottles/Cups/Mugs Tightly: The U-Shaped Slot On The Cup Holder Expander Allows Mugs To Be Fit In And The 4 Rubber Tabs Attached To The Cup Holder Help Stabilize The Bottles/Cups/Mugs To Effectively Protect Them From Tipping Or Splashing. What’S More, In Order To Reduce The Noise During Driving, A Coaster Is Equipped In Each Single Cup Holder..
Doesn't Block Gear Shifter:The Base Can Be Adjusted By A Screwdriver To Avoid The Lack Of Space As The Adapter Can Still Work Where A Center Console Lid, Dash, Emergency Brake Or Lid Covering The Car’S Cup Holders Would Normally Prevent The Adapter From Fitting Properly..
Features
- COMPATIBIE WITH DIAMETER 2.5"-3.75" CAR CUP HOLDER: The large car cup holder expander expands from 2.5" to 3.75", which can be fit in different vehicles with cup holder, such as boats, trucks and RV's. Notice: a few car models might not be adaptable, such as cup holders with unique shapes, inclined angles or with flip lids and so on. Please confirm the car models before purchase. Vehicle Not Compatible with: 2019-2023 RAV4, 2009-2018 Forester, 2020-2024 Outback, 2009-2015 Prius and other ultra-compact vehicle models.
- DOESN'T BLOCK GEAR SHIFTER:The base can be adjusted by a screwdriver to avoid the lack of space as the adapter can still work where a center console lid, dash, emergency brake or lid covering the car s cup holders would normally prevent the adapter from fitting properly.
- FIT FOR LARGE BOTTLES IN 3.4- 4 DIAMETER: The cup holder expander of upgraded version works perfectly with bottles, thermoses, cups, mugs of most popular brands in 3.4 -4 diameter, especially for oversized/larger one.
- HOLD YOUR BOTTLES/CUPS/MUGS TIGHTLY: The U-shaped slot on the cup holder expander allows mugs to be fit in and the 4 rubber tabs attached to the cup holder help stabilize the bottles/cups/mugs to effectively protect them from tipping or splashing. What s more, in order to reduce the noise during driving, a coaster is equipped in each single cup holder.
- EASY TO INSTALL: Both the base and cup holder are made of high-quality ABS, which is sturdy, durable and easy to install. The extendable base allows the adapter to stay firmly in place. Just rotate cup holder until prongs extend and tighten against your car's center console cup holder.
- See more on Amazon...
Brand: MS MASTER SHOW | Manufacturer: Master Show
Dimensions: 6.30 x 4.50 x 4.50 inches | Weight: 0.82 pounds
Warranty: No
See On Amazon #16
JoyTutus Cup Holder Expander with Storage Box for Car, Large Cup Holder Adapt Most Regular Cup Holder 18-40oz, fit in 2.75-3.25inch Car Holder, with Attached Organizer
Asin: B096Z5975G | Model: A1903-02501 | PartNumber: A1903-02501
【Nice Compatibility】 The Center Console Cup Holder Could Contain Multiple Types And Sizes Bottles.The Cup Holder Fit In 3.4 - 3.8 Inch Bottle, Which Could Adapt The Famous-Brands Bottles Or Cups From 18-40 Oz (Notice: The Rubber Tabs On The Cup Holder Could Be Removed When You Need To Put A Large Bottle In). Also, The Gap From The Cup Holder Allows Mug In It..
【Warranty】 We Provide One-Year Warranty, If You Have Any Questions About Our Drink Holder For Car, Pls Feel Free To Contact Us, We Will Make You Satisfied.( Note: Please Measure The Diameter Of The Car Cup Holder Before Placing An Order To Ensure It Fits.) [Patent Pending].
【Stable Rubber Base】The Base Is Made Of Hard And Thick Rubber, Which Better Prevents The Cup Holder From Shaking. It Can Be Installed Directly Without Expanding The Base To Fit The Console Car Cup Holder, Fit Regular Car Cup Holder With A Diameter Of 2.75-3.25 Inches.【Patented Design】.
【Features Of The Storage Box】This Car Cup Holder Organizer Could Be Used For Organizing Little Gadgets,Which Is Designed For Storing And Securing Your Personal Belongings. Cards, Sunglasses, Wallet, Cellphone,Etc., All Those Portable And Important Stuff Could Be Put In It.No More Confusion In Finding Personal Belongings.If You Don't Need It, You Can Also Take It Off..
Features
- Latest New Upgrade Design Inspired from the original cup holder expander, we expand the size of cup holder and add a storage box beside it. With the new features, you can place a larger bottle and some small gadgets in it, organizing your center console in tidiness. Strict quality inspection, durable and strong.
- Features of the Storage Box This car cup holder organizer could be used for organizing little gadgets,which is designed for storing and securing your personal belongings. Cards, sunglasses, wallet, cellphone,etc., all those portable and important stuff could be put in it.No more confusion in finding personal belongings.If you don't need it, you can also take it off.
- Nice Compatibility The center console cup holder could contain Multiple types and sizes bottles.The cup holder fit in 3.4 - 3.8 inch bottle, which could adapt the famous-brands bottles or cups from 18-40 oz (Notice: The rubber tabs on the cup holder could be removed when you need to put a large bottle in). Also, the Gap from the Cup Holder allows Mug in it.
- Stable Rubber Base The Base is made of hard and thick rubber, which better prevents the cup holder from shaking. It can be installed directly without expanding the base to fit the console car cup holder, fit regular car cup holder with a diameter of 2.75-3.25 inches. Patented Design
- Warranty We provide one-year warranty, if you have any questions about our drink holder for car, pls feel free to contact us, we will make you satisfied.( NOTE: Please measure the diameter of the car cup holder before placing an order to ensure it fits.) [Patent pending]
- See more on Amazon...
Brand: JOYTUTUS | Manufacturer: JoyTutus
Dimensions: 3.90 x 8.07 x 6.90 inches
See On Amazon #17
GloBosenPur Car-Cup-Holder-Expander for Car Organizer with Adjustable Base,Compatible with Yeti 20/26/30 oz Hydro Flasks Large 32/40oz, Fits Most Cup Holder, Diameter Bottles in 4.11"-4.44" (1pcs)
Asin: B0B3XWXFH9 | Model: CH001 | PartNumber: CH001 | Ean: 0720047938424 | UPC: 720047938424
Fit Most 32 Ounce - 40 Ounce Wide Bottles & Mugs In 3.4"-4": Car Cup Holder Expander Is Big Enough For Oversized Thermoses, It Also Can Work With Most Popular Brands Bottles And Mugs In 3.4"-4" Diameter..
24 Hours Sever: The Adapter Is Designed To Handle Even The Most Rugged Driving Conditions. If You Have Any Problem Please Message Us By Email.We Will Reply In 24 Hours.
Extendable Base: Insert Is Expandable From 2.6"-3.8" In Diameter To Fit Many Different Automotive Cupholders. Just Twist The Top Of The Adapter To Expand Or Retract The Base. It Also Works Great For Golf-Carts, Motorcycles, Boats, Trucks, And Rv's. Our Extra Thick Pads On The Expanding Base Ensure The Adapter Stays Securely In Your Cup Holder..
Easy To Install: Both The Base And Cup Holder Are Made Of High-Quality Abs, Which Is Sturdy, Durable And Easy To Install. The Extendable Base Allows The Adapter To Stay Firmly In Place. Just Rotate Cup Holder Until Prongs Extend And Tighten Against Your Car's Center Console Cup Holder..
Features
- 2U-SHAPED GROOVE-You can easily pick up the drink in our cup holder expander whether you sit on the left or right no need to replace the cup holder seat.It is easy to remover the cup holder from the slot. And the cup holder has a base deep enough to provide great balance for your water bottle.
- EASY TO INSTALL: Both the base and cup holder are made of high-quality ABS, which is sturdy, durable and easy to install. The extendable base allows the adapter to stay firmly in place. Just rotate cup holder until prongs extend and tighten against your car's center console cup holder.
- FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES & MUGS IN 3.4-4: Car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and mugs in 3.4-4 diameter.
- EXTENDABLE BASE: Insert is expandable from 2.6-3.8 in diameter to fit many different automotive cupholders. Just twist the top of the adapter to expand or retract the base. It also works great for golf-carts, motorcycles, boats, trucks, and RV's. Our extra thick pads on the expanding base ensure the adapter stays securely in your cup holder.
- 24 hours sever: The adapter is designed to handle even the most rugged driving conditions. If you have any problem please message us by email.we will reply in 24 hours
- See more on Amazon...
Brand: GloBosenPur | Manufacturer: GloBosenPur
Dimensions: 6.77 x 4.46 x 4.46 inches
Warranty: 15DAY
See On Amazon #18
ENERLITES Tesla Charger Nozzle Holster, EV Charger Holder Wall-Mount, Electric Vehicle Charging Cable Holder, for All Tesla Models, Heavy-Duty Steel Hook, Outdoor/Indoor, 25354
Asin: B0BT9BTQ8N | Model: 25354 | PartNumber: 25354 | Ean: 0883951852184 | UPC: 883951852184
Features A Heavy-Duty Steel Hook For Storing The Charging Cable; Avoid Messy Cables And Tripping Hazards Both While Charging And Between Uses.
For Tesla Charging Connections Only; Compatible With All Tesla Models; All Hardware Is Included; Ul Listed; 1-Year Warranty.
Designed For Easy Installations On Most Wall Surfaces; May Require Drilling Holes In The Surface To Allow Installation.
Compatible With All Tesla Models: Model X, Model Y, Model 3, And Model S; Made From Durable Materials And Designed For Either Indoor Or Outdoor Use.
Features
- Mount onto any Tesla charging plug to holster the charging nozzle and provide a storage hook for EV charging cables
- Compatible with all Tesla models: Model X, Model Y, Model 3, and Model S; made from durable materials and designed for either indoor or outdoor use
- Features a heavy-duty steel hook for storing the charging cable; avoid messy cables and tripping hazards both while charging and between uses
- Designed for easy installations on most wall surfaces; may require drilling holes in the surface to allow installation
- For Tesla charging connections ONLY; compatible with all Tesla models; all hardware is included; UL listed; 1-year warranty
- See more on Amazon...
Brand: ENERLITES | Manufacturer: ENERLITES
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #19
Cup Holder Expander for Car, Automotive Drink Cup Holder Adapter with Adjustable Base, Compatible with Coffee Mug, Yeti 20/26/30oz, Ramblers, Hydro Flasks 32/40oz, Other Large Bottles in 3.4"-3.8"
Asin: B0BQ9RBY8H | Model: 01 | PartNumber: 01 | Ean: 0735373825164 | UPC: 735373825164
【Universal Fit】The Expandable Base Suitable For 2.5"-3.75" Car Center Console Cup Holder, Works Good With Most Vehicles, Such As Motorcycles, Boats, Utvs, Golf Varts, Rvs, Jeeps, Trucks, Etc. (Vehicles Not Recommended: Rav4, Mini).
【Slot Design For Mugs】The Car Cup Holder Expander Features An Integrated Mug Handle Slot, So Coffee Mugs Will Fit And Remove With Ease. And The Cup Holder Has A Base Deep Enough To Provide A Great Balance For Your Water Bottle..
【Expandable Base】The Automotive Cup Holder With Adjustable Base, Expandable Diameter From 2.5"-3.75", Big Enough For Most Popular Brands Oversized Bottles Or Mugs In 3.4"-3.8" Diameter. (Please Compare Bottle Dimensions To The Product Dimensions Before Purchasing.).
【High Quality】The Base And Cup Holder Of Expander Are Made Of High Quality Thick Plastic, Extra Rubber Pad Attached On The Base Can Improve Stability, Prevent Scratching Your Console Cup Holder And Avoiding Abnormal Noise..
Features
- Easy to Install Simply hold the base and twist the top, the base will retract or expand to fit your cup holder. The extendable base allows the adapter to stay firmly in place, regardless of how rough the terrain gets.
- High Quality The base and cup holder of expander are made of high quality thick plastic, extra rubber pad attached on the base can improve stability, prevent scratching your console cup holder and avoiding abnormal noise.
- Universal Fit The expandable base suitable for 2.5-3.75 car center console cup holder, works good with most vehicles, such as motorcycles, boats, UTVs, golf varts, RVs, Jeeps, trucks, etc. (Vehicles Not Recommended: Rav4, Mini)
- Expandable Base The automotive cup holder with adjustable base, expandable diameter from 2.5-3.75, big enough for most popular brands oversized bottles or mugs in 3.4-3.8 diameter. (Please compare bottle dimensions to the product dimensions before purchasing.)
- Slot Design for Mugs The car cup holder expander features an integrated mug handle slot, so coffee mugs will fit and remove with ease. And the cup holder has a base deep enough to provide a great balance for your water bottle.
- See more on Amazon...
Brand: Hadwoer | Manufacturer: Hadwoer
Dimensions: 6.30 x 4.33 x 4.25 inches
Warranty: 90 days
See On Amazon #20
Spigen Bespoke All-in-One Cable Organizer Holder Wall Mount Designed for Tesla Model 3/Y/X/S Charger Cable - Dark Silver 2023/2022
Asin: B0B24P4D9W | Model: ACP04294 | PartNumber: ACP04294 | Ean: 8809811858679
Charging Port Easily Clicks In, Indicating A Successful Dangle-Free Mount.
Compatible With Any Tesla Mobile Connector.
The Wall Anchors Are Designed For Installation On Drywalls Only **(Not On Wall Studs).
Quick And Easy Installation: Includes 4 Screws, 4 Drywall Anchors, And Fasteners For A Secure Hold (Not On Wall Studs).
Matte-Finish For Sleek, Dust-Free Modern Style All Year Long.
Features
- Made from premium and durable PC, sturdily holds the cable, plug, and power chassis in place
- Matte-finish for sleek, dust-free modern style all year long
- Charging port easily clicks in, indicating a successful dangle-free mount
- Quick and easy installation: includes 4 screws, 4 Drywall anchors, and fasteners for a secure hold (Not on Wall Studs)
- Compatible with any Tesla Mobile Connector
- The wall anchors are designed for installation on drywalls only **(NOT on wall studs)
- See more on Amazon...
Brand: Spigen | Manufacturer: Spigen
Weight: 0.22 Pounds
Warranty: 24 Months Worry Free Warranty
See On Amazon
Looking For Something Else?
Search