Class A Customs | 30 Gallon RV Concession Fresh Water Tank with 12 Volt Water Pump | T-3000-PUMP
Asin: B08DL48VXQ | Model: T-3000 | PartNumber: T-3000 | Ean: 0782731951102 | UPC: 782731951102
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Classacustoms 12 Volt Fresh Water Pump Model # 12V3 - Fresh Water Use Only - Open Flow 11.6Lpm / 3.0Gpm Amps 4.0A Max Amps 8.0A Shut Off Pressure 45Psi/3.1 Bar On-Demand Pump Only Turns On When Senses Pressure Changes In Line 12 Volt Power Only! 110/115/220 Volt Will Damage The Unit - Read Instruction Bookler Before Installation.
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Features
- 30 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 34.5 Longest Length (not including fittings) x 12 x 17.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY! 110/115/220 volt will damage the unit - READ INSTRUCTION BOOKLER BEFORE INSTALLATION
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 34.50 x 17.50 inches | Weight: 18.00 Pounds
See On Amazon Similar To Class A Customs 30 Gallon
#1
Connectyle Men's Outdoor Mesh Boonie Sun Hat Wide Brim UV Protection Fishing Hat (Army Green)
Asin: B086YXDC69
Upf 50+ Sun Protection Hat Offer The Highest Sun Protection Available,Block 98%+ Of Damaging Uva And Uvb Sun Rays.
Adjustable Chin Strap,Adjustable Drawcord And Toggle At Back For Comfortable Fit.
Must-Have Summer Safari Sun Hat Is Perfect For Any Outdoor Activities: Fishing, Hiking, Cycling, Camping, Hunting, Gardening, Boating And Any More Others.
The Mesh Side Vents For Superior Airflow And Internal Moisture Wicking Sweatband For Comfortable Fit.
3" (7.6Cm) Wide Brim, One Size Fits Most Head Circumference: 22.0"-23.2"/56-59 Cm.
Features
- Polyester, lightweight, breathable and comfortable wear
- 3 (7.6cm) Wide brim, One size fits most head Circumference: 22.0-23.2/56-59 CM
- UPF 50+ sun protection hat offer the highest sun protection available,block 98%+ of damaging UVA and UVB sun rays
- The mesh side vents for superior airflow and internal moisture wicking sweatband for comfortable fit
- Adjustable Chin Strap,Adjustable drawcord and toggle at back for comfortable fit
- Must-have summer safari sun hat is perfect for any outdoor activities: fishing, hiking, cycling, camping, hunting, gardening, boating and any more others
- See more on Amazon...
Brand: Connectyle
See On Amazon #2
MotoRad MGC791 Fuel Cap - Toyota Camry (83-23) Corolla (83-23) RAV4 (00-23) Tacoma (99-23) Tundra (00-23), Honda Accord (90-17) Civic (92-15) CR-V (97-16), Subaru Outback (00-24) Forester (98-24)
Asin: B000C5CEKC | Model: MGC791 | PartNumber: MGC791 | Ean: 0055644007915, 0726714904013, 0826732279336, 7262318397347 | UPC: 826732279336, 726714904013, 055644007915
Manufactured From Durable, Long-Life Materials.
Fit Type: Vehicle Specific. Prevent Fuel Loss Through Evaporation.
Reduces Air Pollution With Proper Sealing And Venting.
Passes All State And Federal Emissions Tests.
Features
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Fit type: Vehicle Specific. Prevent fuel loss through evaporation
- See more on Amazon...
Brand: MotoRad | Manufacturer: Motorad
Dimensions: 2.15 x 2.84 x 2.84 inches | Weight: 0.21 Pounds
Warranty: Limited
See On Amazon #3
Motorad MGC-817 Fuel Cap
Asin: B000C5GAQQ | Model: MGC817 | PartNumber: MGC817 | Ean: 7262318417656, 0055644008172 | UPC: 055644008172
Manufactured With Oem Quality Materials And Safety Standards.
A "Tethered" Version Is Also Available, Model #Mgc-817T.
Fit Type: Vehicle Specific.
A Leaking Fuel Cap Can Allow Up To 30 Gallons Of Gasoline To Evaporate Over The Period Of A Year.
Specifically Designed Pressure And Vacuum Relief Valves To Prevent Evaporation Of Fuel.
Features
- Manufactured to pass all state and federal emissions requirements
- Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel
- Manufactured with OEM quality materials and safety standards
- A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year
- A tethered version is also available, MODEL #MGC-817T
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: MotoRad | Manufacturer: MotoRad
Dimensions: 0.29 x 2.98 x 2.50 inches | Weight: 0.13 pounds
Warranty: 1 year
See On Amazon #4
Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000
Asin: B007MSLA84 | Model: T-3000-1 | PartNumber: T-3000-1
Tank Built-In Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads.: (Two) 1.5" Balloon Style Threaded Female Npt Standard - Fitting Will Be Closed, To Use Remove Inner Membrane With Razor Knife (Two) .5" Threaded Female Npt Standard - Open Fitting, Unsealed.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 34.5” Longest Length (Not Including Fittings) X 12” X 17.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 34.5 Longest Length (not including fittings) x 12 x 17.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5 Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5 Threaded Female NPT Standard - open fitting, unsealed
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 34.50 x 17.50 inches | Weight: 18.00 Pounds
Warranty: Manufacturer warranty covers manufacturer defect on manufacturer installed fittings and tank. Using this tank for any purpose other than fresh or gray water storage will void any/all warranty. Do Not use tanks for sewage or fuel.
See On Amazon #5
Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank
Asin: B07XTNGY88 | Ean: 7426933331340
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 50.5” Longest Length (Not Including Fittings) X 17.5” X 19.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 50.5 Longest Length (not including fittings) x 17.5 x 19.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #6
Class A Customs | One (1) RV Fresh and Gray Water use 33 Gallon Tank | T-3300
Asin: B08FJ7ZGPY | Model: T-3000-1 | PartNumber: T-3000-1 | Ean: 0782731951393 | UPC: 782731951393
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 36” Longest Length (Not Including Fittings) X 12” X 17.75” Average Thickness 7/32” +/- (+/- .25" On Each Measurement).
Features
- 33 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 36 Longest Length (not including fittings) x 12 x 17.75 Average thickness 7/32 +/- (+/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 36.00 x 17.50 inches | Weight: 18.00 Pounds
See On Amazon #7
30 Gallon RV Fresh/Gray Water Tank 34" x 18" x 12" - BPA Free (30 Gallon)
Asin: B07KGK5SPK | Ean: 0701231042349 | UPC: 701231042349
One Piece Seamless Construction - No Seams To Burst.
Stain, Corrosion And Rust Resistant Features Make Them Ideal For Replacement Or Oem Installation On Rvs, Horse Trailers Or Marine Products..
These Rotational Molded Fresh Water Tanks Are Made From A High Quality Durable Polyethylene Material..
All Tanks Come With (1) 1.25" Water Fill Inlet And (3) 3/8" Npt Connections. Non-Pressurized Tank - The Tank Must Be Vented.
Features
- This 30 gallon water tank measures 34" x 18" x 12" (not including fittings)
- All tanks come with (1) 1.25 water fill inlet and (3) 3/8 NPT connections. Non-Pressurized Tank - The tank must be vented
- One piece seamless construction - No Seams to burst
- These rotational molded fresh water tanks are made from a high quality durable polyethylene material.
- Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products.
- See more on Amazon...
Brand: A.A | Manufacturer: Automotive Authority LLC
Dimensions: 12.00 x 34.00 x 18.00 inches
See On Amazon #8
Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank
Asin: B07XTNP3S2 | Ean: 7426933331333
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 44.5” Longest Length (Not Including Fittings) X 17.5” X 19.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 44.5 Longest Length (not including fittings) x 17.5 x 19.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 17.50 x 44.50 x 19.50 Inches
See On Amazon #9
Class A Customs | One (1) RV Fresh and Gray Water use 35 Gallon Tank | T-3500 | 38.75" X 12" X 17.375" | Camper and Concession Trailer/Food Truck
Asin: B0BZDQ5TLF | Model: T-3500 | PartNumber: T-3500
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Perfect For Concession And Food Vendor Trucks And Trailers.
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 38.75” Longest Length (Not Including Fittings) X 12” X 17.375” Average Thickness 7/32” +/- (+/- .25" On Each Measurement).
Features
- 35 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 38.75 Longest Length (not including fittings) x 12 x 17.375 Average thickness 7/32 +/- (+/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- Perfect for Concession and food vendor trucks and trailers
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 38.75 x 17.38 inches | Weight: 19.00 Pounds
See On Amazon #10
Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000
Asin: B08DRLSFJF | Model: UM-3000 | PartNumber: UM-3000 | Ean: 0782731951249 | UPC: 782731951249
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 48” Longest Length (Not Including Fittings) X 8.5” X 20.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 48 Longest Length (not including fittings) x 8.5 x 20.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 9.00 x 48.00 x 21.00 inches | Weight: 18.00 Pounds
See On Amazon #11
Peachtree Woodworking Supply 4-Inch Cyclone Dust Collection Elbows and Couplers Separator Kit for Woodworking Debris Containers, Buckets and Barrels
Asin: B071CL5MJN | Model: 530 | PartNumber: 530 | Ean: 0814310014066 | UPC: 814310014066
The Working Theory Behind Cyclone Separators Is That The Heavier Wood Chips Fall To The Bottom Of The Container While The Lighter Dust Particles Get Pulled In The Out Feed Port And Into Your Dust Collector Or Vacuum. This Keeps The Large Debris From Slamming Into Your Dust Collector’S Impeller Or Filling Up Your Shop Vacuums Container To Quickly. This Also Helps Prevents Any Unnecessary Damage To Dust Collector Impellers..
The 4” Separator Cyclone Kit Comes With 2 Ea. 4" Ports (For Top Side Of Separator) 2 Ea. 4" In Feed Elbow Ports (For Bottom Side Of Separator) 1 Ea. Hardware Pack And 2 Ea. Easy To Secure 4" Turn Key Hose Clamps. Hose, Barrel Or Container Are Required For This Kit To Properly Work. Hose, Barrel Or Container Are Not Included..
Another Advantage To Using Cyclone Style Separators Is That Your Bottom Bag On Dust Collector Machines Or Shop Vacuum Containers Won’T Fill Up Nearly As Quick Than They Would Without A Cyclone Style Separator. This Means You Can Use The Cyclone Separator With Your Planer, Jointer Or Router Tables Without Having To Empty The Bag Or Vacuum Containers Nearly As Often..
This Cyclone Kit Will Help Protect Your Dust Collector From Unnecessary Wear And Tear. Once Installed On A Barrel, Box, Or Any Container (Barrel Or Box Not Included), This Dust And Debris Separator Keeps The Larger, Heavier Chips Coming From You Machinery From Getting Into Your Dust Collector Impeller. This Will Ad Years To The Life Of Your Dust Collector And Help Keep Your Bag Emptying Chores To A Minimum..
Features
- There s no doubt about it, large cyclone dust collector systems are great! Their value to larger and industrial or commercial workshop settings is immeasurable. What about the rest of us with garage size workshops who don t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4 Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop.
- This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum.
- The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary damage to dust collector impellers.
- Another advantage to using cyclone style separators is that your bottom bag on dust collector machines or shop vacuum containers won t fill up nearly as quick than they would without a cyclone style separator. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers nearly as often.
- The 4 Separator Cyclone kit comes with 2 ea. 4 Ports (for top side of separator) 2 ea. 4 in feed elbow ports (for bottom side of separator) 1 ea. hardware pack and 2 ea. easy to secure 4 turn key hose clamps. Hose, barrel or container are required for this kit to properly work. Hose, barrel or container are NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.54 pounds
See On Amazon #12
Class A Customs | T-5000 | 50 Gallon Fresh Water Holding Tank RV and Concession
Asin: B0B2KPDCZW | Model: T-5000 | PartNumber: T-5000
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 38.25” Longest Length (Not Including Fittings) X 14.25” X 22.25”- Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 50 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 38.25 Longest Length (not including fittings) x 14.25 x 22.25 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 22.00 x 38.00 x 14.00 inches
Warranty: 1 year from date of purchase against any manufacturing defects. Warranty will be replacement only!
See On Amazon #13
MotoRad MGC791SK Fuel Cap - Toyota Camry (83-23) Corolla (83-23) RAV4 (00-23) Tacoma (99-23) Tundra (00-23), Honda Accord (90-17) Civic (92-15) CR-V (97-16), Subaru Outback (00-19) Forester (98-19)
Asin: B00498YJL0 | Model: MGC-791SK | PartNumber: MGC-791SK | Ean: 0055644107912 | UPC: 055644107912
Specifically Designed Pressure And Vacuum Relief Valves To Prevent Evaporation Of Fuel.
Keyed Alike.
Fit Type: Vehicle Specific.
A Leaking Fuel Cap Can Allow Up To 30 Gallons Of Gasoline To Evaporate Over The Period Of A Year.
Manufactured With Oem Quality Materials And Safety Standards.
Features
- Deters vandalism and fuel theft
- Manufactured with OEM quality materials and safety standards
- Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel
- A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year
- Keyed alike
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 07/17/2013
Brand: MotoRad | Manufacturer: MotoRad
Dimensions: 5.25 x 3.50 x 3.50 inches | Weight: 0.40 Pounds
Warranty: Limited
See On Amazon #14
Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water
Asin: B07659973Z | Model: T-2000 | PartNumber: T-2000 | Ean: 0671065514278 | UPC: 671065514278
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 32.5” Longest Length (Not Including Fittings) X 11.75” X 11.75” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 32.5 Longest Length (not including fittings) x 11.75 x 11.75 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 11.75 x 32.50 x 11.75 inches | Weight: 30.00 Pounds
See On Amazon #15
MotoRad MGC900 Fuel Cap - Toyota Camry (83-23) Corolla (83-23) RAV4 (00-23) Tacoma (99-23) Highlander (01-23), Honda Accord (90-17) Civic (92-15) CR-V (97-16), Nissan Rogue (11-19) Altima (93-18)
Asin: B000C5I9LU | Model: MGC-900 | PartNumber: MGC-900 | Ean: 0055644009001 | UPC: 055644009001
Passes All State And Federal Emissions Tests. Type: Non-Locking.
Manufactured From Durable, Long-Life Materials.
Protects Your Fuel From Theft And Vandalism.
Features
- Allows Slow Release Of Pressure Before Removing The Cap
- Protects Your Fuel From Theft And Vandalism
- Passes All State And Federal Emissions Tests. Type: Non-Locking
- Manufactured From Durable, Long-Life Materials
- See more on Amazon...
Brand: MotoRad | Manufacturer: Motorad
Dimensions: 3.11 x 3.45 x 3.16 inches | Weight: 0.25 Pounds
Warranty: Limited
See On Amazon #16
Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (40 Gallon & 46 Gallon) | RV Water Holding Tanks
Asin: B085GKJ2C2 | Ean: 7426933332200
Tanks Built-In Fittings: (Two) 1.5" Balloon Style Threaded Female Npt Standard - Fitting Will Be Closed, To Use Remove Inner Membrane With Razor Knife (Two) .5" Threaded Female Npt Standard - Open Fitting, Unsealed.
46 Gallon Tank Measurements - 42" X 18" X 14" (+/- .25").
40 Gallon Tank Measurements - 39 1/2" X 18" X 13" (+/- .25").
Nsf Certified Materials Used For Manufacturing Process -- All Parts Of Tank Made With Nsf International Nsf/Ansi Std 61 Approved Medium Density Polyethylene (Mdpe) Resin With Uv-8 Stabilization -- The Tank And Fittings Are Both Made Out Of This Material..
Features
- Combo Pack of RV Fresh & Gray Water Tanks, 40 Gallon & 46 Gallon
- NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization -- The tank and fittings are both made out of this material.
- TANKS BUILT-IN FITTINGS: (TWO) 1.5 Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5 Threaded Female NPT Standard - open fitting, unsealed
- 40 Gallon Tank Measurements - 39 1/2 x 18 x 13 (+/- .25)
- 46 Gallon Tank Measurements - 42 x 18 x 14 (+/- .25)
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #17
Class A Customs | 42 Gallon RV Concession Fresh and Gray Water Holding Tank | T-4200
Asin: B08DDHXPS9 | Ean: 0782731950990 | UPC: 782731950990
Tank Built-In Fittings: (Three) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 27.5” Longest Length (Not Including Fittings) X 15.25” X 22.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 42 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 27.5 Longest Length (not including fittings) x 15.25 x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (THREE) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #18
MotoRad MGC-819 Fuel Cap - Toyota Camry (83-23) Corolla (83-23) RAV4 (00-23) Tacoma (99-23) Highlander (01-23) Tundra (00-23), Honda Accord (90-17) Civic (92-15) CR-V (97-16) Odyssey (95-17)
Asin: B000C5CEPC | Model: MGC819 | PartNumber: MGC819 | Ean: 0826732591384, 0055644008196 | UPC: 826732591384, 055644008196
Motorad Fuel Caps Are Manufactured From Durable, Long-Life Materials That Reduce Air Pollution With Proper Sealing And Venting. They Are Independently Tested For Emission Control That Meets The Most Stringent Industry Standards..
Replaces F42z9030a , F5az9030b , 3527385 , Ntc5418 , Zzl042250a , F5tz9030b , F32z9030a , F4dz9030a , F5rz9030a , 3542094 , Zzl042250 , And Zzm042250..
Fits Select Acura, Audi, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, Gmc, Honda, Lexus, Lincoln, Mazda, Nissan, Oldsmobile, Pontiac, Plymouth, Subaru, Toyota, And Volkswagen Applications. Be Sure To Select Your Vehicle Above To Verify This Product Will Fit Your Specific Application..
A Leaking Fuel Cap Can Allow Up To 30 Gallons Of Gasoline To Evaporate Over The Period Of A Year. Motorad Fuel Caps Prevent Fuel Loss, Saving You Money And Time. Additionally, They Help Prevent The Flow Of Fuel From The Tank Filler Neck When A Car Is In An Accident, Including Rollovers..
Features
- MotoRad fuel caps are manufactured with OEM-quality materials and safety standards by an OE Supplier. Specifically designed pressure and vacuum relief valves prevent evaporation of fuel. They pass all state and federal emissions requirements.
- A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year. MotoRad fuel caps prevent fuel loss, saving you money and time. Additionally, they help prevent the flow of fuel from the tank filler neck when a car is in an accident, including rollovers.
- MotoRad fuel caps are manufactured from durable, long-life materials that reduce air pollution with proper sealing and venting. They are independently tested for emission control that meets the most stringent industry standards.
- Fits select Acura, Audi, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Honda, Lexus, Lincoln, Mazda, Nissan, Oldsmobile, Pontiac, Plymouth, Subaru, Toyota, and Volkswagen applications. Be sure to select your vehicle above to verify this product will fit your specific application.
- Replaces F42Z9030A , F5AZ9030B , 3527385 , NTC5418 , ZZL042250A , F5TZ9030B , F32Z9030A , F4DZ9030A , F5RZ9030A , 3542094 , ZZL042250 , and ZZM042250.
- See more on Amazon...
Brand: MotoRad | Manufacturer: Motorad
Dimensions: 3.25 x 3.00 x 3.00 Inches | Weight: 0.17 pounds
Warranty: Limited
See On Amazon #19
Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800
Asin: B07RLTG22R | Ean: 7426933331319
Inlet & Vent Installation Class A Customs Black Water Tanks Only Come With The Outlet The End User Will Determine Where The Inlet And Vent Will Need To Be Placed And Install, Hardware Not Included. Tank Must Be Vented Allowing Air In And Out When In Use. *Do Not Pressurize Tank* Do Not Over-Tighten Fittings Damage Will Occur..
Not Included Inlet And Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping Not Included.
Installed Outlet 3” Abs Female Pipe - Outlet Can Not Be Moved Do Not Over-Tighten Fittings Damage Will Occur Dump Valves Do Not Hook Directly To The 3" Abs Fitting, From The Outlet Run Pvc Or Abs Piping (Not Included), Dump Valve (Not Included) Is Added To The Piping..
Features
- 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE WASTE/GRAY WATER USE ONLY Used in RV s Campers, Trailers, Motorhomes and Tiny Houses
- INSTALLED OUTLET 3 ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3 ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping.
- INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur.
- NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #20
Class A Customs | T-2000-BPK| 20 Gallon Fresh Water Tank & Plumbing Kit RV Concession
Asin: B07JGBXG2Q | Model: T-2000 | PartNumber: T-2000 | Ean: 7426933334068
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Basic Plumbing Kit Includes - (Two) 0.5” Hose Barb To 0.5” Male Pipe Thread Adaptor (Four) 0.5” Hose Clamp (One) 1.25” Hose Barb To 1.5” Male Pipe Thread Adaptor (Two) 1.5” Hose Clamps (One) 1.5” Male Pipe Thread Pvc Male Adaptor (One) 5Ft. Section Of 0.5” Id Vent/Draw Hose (One) 5Ft. Section Of 1.25” Id (1.375” Od) Fill Hose.
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 32 1/2" Longest Length (Not Including Fittings) X 11 3/4” X 11 3/4” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 32 1/2 Longest Length (not including fittings) x 11 3/4 x 11 3/4 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5 Hose Barb to 0.5 Male Pipe Thread Adaptor (FOUR) 0.5 Hose Clamp (ONE) 1.25 Hose Barb to 1.5 Male Pipe Thread Adaptor (TWO) 1.5 Hose Clamps (ONE) 1.5 Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5 ID Vent/Draw Hose (ONE) 5ft. Section of 1.25 ID (1.375 OD) Fill Hose
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 11.75 x 32.50 x 11.75 Inches | Weight: 30.00 pounds
See On Amazon
Looking For Something Else?
Search