CASEMATIX 23" Customizable 7 Pistol Multiple Pistol Case - TSA Approved Waterproof & Shockproof Hard Gun Cases for Pistols, Magazines and Accessories - Gun Case for Pistols with Two Layers of 2" Foam
Asin: B08FFC7J6Y
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Soft, Shock-Absorbing Foam Interior - Your Multi Pistol Case Hard Shell Carrier Will Surround Your Pistols And Accessories With Multiple Protective Firearm Foam Layers For Optimal Defense During Travel And While Your Guns Are In Storage..
Padlock Rings For Extra Security - Looking For Lockable Multi Gun Cases For Pistols? You Can Add Padlocks (Not Included) To This Hard Pistol Case To Keep Your Equipment Extra Secure. Exterior Dimensions: 23" X 15.5" X 8.5".
The Perfect Compartments - The Casematix Seven Handgun Case Hard Shell Features Two 2" Layers Of Completely Customizable Pre-Diced Foam, Allowing You To Create Specialized Compartments For Your Pistols, Multiple Magazines, Ammo Box And More..
Waterproof And Airtight Construction - Protect Your Precious Gear From Water Damage! This Casematix 7 Pistol Case Features A Waterproof And Airtight O-Ring Seal To Best Protect Your Accessories. Don't Settle For Sub-Par Firearm Travel Cases!.
Features
- CRUSHPROOF 7 HANDGUN CARRYING CASE - Unlike with soft pistol cases, your firearms will be protected behind impact-resistant polymer composite plastic - offering optimal defense from drops and impacts. Interior dimensions: 18" x 11" x 6"
- WATERPROOF AND AIRTIGHT CONSTRUCTION - Protect your precious gear from water damage! This CASEMATIX 7 pistol case features a waterproof and airtight o-ring seal to best protect your accessories. Don't settle for sub-par firearm travel cases!
- SOFT, SHOCK-ABSORBING FOAM INTERIOR - Your multi pistol case hard shell carrier will surround your pistols and accessories with multiple protective firearm foam layers for optimal defense during travel and while your guns are in storage.
- THE PERFECT COMPARTMENTS - The CASEMATIX Seven Handgun Case Hard Shell features two 2 layers of completely customizable pre-diced foam, allowing you to create specialized compartments for your pistols, multiple magazines, ammo box and more.
- PADLOCK RINGS FOR EXTRA SECURITY - Looking for lockable multi gun cases for pistols? You can add padlocks (not included) to this hard pistol case to keep your equipment extra secure. Exterior dimensions: 23 x 15.5 x 8.5
- See more on Amazon...
Brand: CASEMATIX | Manufacturer: CASEMATIX
See On Amazon Similar To CASEMATIX 23 Customizable 7 Pistol
#1
MTM 805-40 Single Pistol Handgun Case up to 4" Revolver Barrel, Black, 10.1"x8.0"x3.2"
Asin: B0013RF6HG | Model: 805-40 | PartNumber: 805-40 | Ean: 0026057315409 | UPC: 026057315409
Thick Foam Padding And Double Padlock Tabs Provide The Utmost In Protective Security-Thick Enough For A Trigger Lock When Traveling.
Outside Dimensions: 10.1" X 8" X 3.2"; Inside Dimensions: 9.75" X 5.75" X 3.0"; Made In Usa.
Approved For Law Enforcement Travel; For Semi-Autos And Revolvers With Barrels 4 Inches Or Less.
Made Of Rugged Polypropylene With A Handsome Textured Finish.
Features
- Durable construction; Reliable snapping latches; Large, comfortable handle
- Made of rugged polypropylene with a handsome textured finish
- Thick foam padding and double padlock tabs provide the utmost in protective security-thick enough for a trigger lock when traveling
- Approved for law enforcement travel; For semi-autos and revolvers with barrels 4 inches or less
- Outside Dimensions: 10.1 x 8 x 3.2; Inside Dimensions: 9.75 x 5.75 x 3.0; Made in USA
- See more on Amazon...
First Available: 03/20/2011
Brand: MTM | Manufacturer: MTM Molded Products
Dimensions: 3.20 x 10.10 x 8.00 inches | Weight: 0.00 pounds
Warranty: Manufacturer Warranty
See On Amazon #2
MTM 809-40 Double Pistol Handgun Case Up to 8.5" Revolver Barrel, Black
Asin: B0013RD6OG | Model: 809-40 | PartNumber: 809-40 | Ean: 0026057306407 | UPC: 026057306407
For 2 Automatics Or 2 Revolvers With Barrels Up To 8 Inches.
Color: Black; Made In Usa.
Rugged Polypropylene With Textured Finish, Thick Foam Padding And Double Padlock Tabs.
Outside Dimensions: 15.5" X 12.2" X 3.6"; Inside Dimensions: 14" X 10" X 3.1".
Features
- Two pistol, snap-latch, handgun case
- Outside Dimensions: 15.5 x 12.2 x 3.6; Inside Dimensions: 14 x 10 x 3.1
- For 2 automatics or 2 revolvers with barrels up to 8 inches
- Rugged polypropylene with textured finish, thick foam padding and double padlock tabs
- Color: Black; Made in USA
- See more on Amazon...
First Available: 06/15/2010
Brand: MTM | Manufacturer: MTM Case-Gard
Dimensions: 3.60 x 15.50 x 12.20 inches | Weight: 0.00 pounds
Warranty: 5 Year Warranty
See On Amazon #3
US PeaceKeeper P21013 Pistol Case (Large),Black , 13 x 7 x 1-Inch
Asin: B00R3MXRGM | Model: P21013 | PartNumber: P21013 | Ean: 0663306210131 | UPC: 663306210131
Double Stitched For Durability.
Lifetime Warranty; Weight: 1 Pound; Outside Dimensions: 13"(L) X 7"(H).
One Inch Padding.
Brushed Tricot Liner.
Features
- 600 denier water-resistant fabric
- Brushed Tricot liner
- Double stitched for durability
- One inch padding
- Lifetime warranty; Weight: 1 pound; Outside Dimensions: 13(L) x 7(H)
- See more on Amazon...
Brand: US PeaceKeeper Products | Manufacturer: US PeaceKeeper Products
Dimensions: 1.00 x 13.00 x 7.00 inches | Weight: 0.24 Pounds
Warranty: SEE MANUFACTURER
See On Amazon #4
CASEMATIX Hard Gun Case for Pistols - TSA Approved Waterproof & Shockproof Gun Cases for Pistols, Compact 9mm Gun Case for Carrying Handgun with Scope and Accessories
Asin: B086B92H1F
Soft, Shock-Absorbing Foam Interior: This Pistol Case Will Surround Your Firearm With Three Protective, Dense Foam Layers For Maximum Protection During Travel And While Your Gun Is In Storage..
Padlock Rings For Added Security: You Can Even Add Padlocks (Not Included) To The Small Pistol Case To Keep Your Equipment Extra Secure. Exterior Dimensions: 12" X 8.5" X 3.75".
The Perfect Compartments: The Casematix Pistol Case Hard Gun Case Features A Completely Customizable Layer Of Pre-Diced Foam, Allowing You To Create Specialized Compartments For Your Range Accessories..
Waterproof & Airtight Construction: Protect Your Precious Gear From Water Damage! This Casematix Hard Pistol Case Features A Waterproof And Airtight Seal To Best Protect Your Handguns And Accessories..
Features
- Crushproof Handgun Carrying Case: Unlike with soft cases, your revolver or other firearm will be safe behind impact-resistant polymer composite plastic - offering optimal defense from drops and impacts. Interior dimensions: 9" x 5" x 2.75"
- Waterproof & Airtight Construction: Protect your precious gear from water damage! This CASEMATIX hard pistol case features a waterproof and airtight seal to best protect your handguns and accessories.
- Soft, Shock-Absorbing Foam Interior: This pistol case will surround your firearm with three protective, dense foam layers for maximum protection during travel and while your gun is in storage.
- The Perfect Compartments: The CASEMATIX pistol case hard gun case features a completely customizable layer of pre-diced foam, allowing you to create specialized compartments for your range accessories.
- Padlock Rings for Added Security: You can even add padlocks (not included) to the small pistol case to keep your equipment extra secure. Exterior dimensions: 12 x 8.5 x 3.75
- See more on Amazon...
Brand: CASEMATIX | Manufacturer: CASEMATIX
See On Amazon #5
Kinghardcase Gun Case 5 Pistol Case & 12 Magazine Pre-Cut Foam Shock Proof Waterproof Hard Gun Case for Pistol Cases
Asin: B0C9HW3XG6 | Model: 1130324 | PartNumber: 1130324 | Ean: 0783798122061, 0747302681949 | UPC: 747302681949, 783798122061
【Safe Transport】Two Padlock Points That Support A Customer Supplied Tsa Padlock With A 1/4" Shackle Along With One Way Hinge Pins Ensure Your Gear Remains Safe And Secure..
【Size And Weight】 Size Is 16.9 "L X 13.7" W X 7 "H, Weight Is 6 Pounds.
【What's Included】Our Hard Gun Case Comes With One Tool Pliers, One Desiccant, And One Gun Case (Please Note: The Case Only! Pistol, Magazine, And Other Accessories Are Not Included)..
【Dependable Quality】Constructed From High-Strength Abs And Upgrade Eva, Our Handgun Case Offers Superior Impact Resistance, Anti-Collision, And Anti-Scratch Protection. It Has Undergone Ip67 Waterproof Verification, Making It Perfect For Use In The Harshest Environments. It Comes With A Lifetime Warranty, So You Can Rest Assured Of Its Durability..
【Multi-Functional】With The Detachable Foam Module, This 5-Gun Pistol Capacity Case Can Be Converted Into A 3-Gun Case. It Also Has Additional Space For Handgun Accessories Like Goggles, Holsters, Gloves, Ammunition, Etc..
Features
- Customized Design This hard gun case has been designed to fit 5 handguns and 12 magazines. The carefully crafted foam insert ensures that your firearms and magazines are safely stored. It fits most handgun models on the market with a length and size of less than 11 inches, including Glock, Sig Sauer, and more.
- Multi-functional With the detachable foam module, this 5-gun pistol capacity case can be converted into a 3-gun case. It also has additional space for handgun accessories like goggles, holsters, gloves, ammunition, etc.
- Safe Transport Two padlock points that support a customer supplied TSA padlock with a 1/4 shackle along with one way hinge pins ensure your gear remains safe and secure.
- Dependable Quality Constructed from high-strength ABS and upgrade EVA, our handgun case offers superior impact resistance, anti-collision, and anti-scratch protection. It has undergone IP67 waterproof verification, making it perfect for use in the harshest environments. It comes with a lifetime warranty, so you can rest assured of its durability.
- Size and weight Size is 16.9 L x 13.7 W x 7 H, weight is 6 pounds
- What's Included Our hard gun case comes with one tool pliers, one desiccant, and one gun case (PLEASE NOTE: The case only! Pistol, magazine, and other accessories are NOT INCLUDED).
- See more on Amazon...
Brand: Kinghardcase
Dimensions: 7.00 x 16.90 x 13.70 Inches | Weight: 6.00 pounds
See On Amazon #6
MTM Single Handgun Case for up to 6-Inch Revolver (Black)
Asin: B000H8ZWYE | Model: 807-40 | PartNumber: 807-40 | Ean: 0026057301501 | UPC: 026057301501
Snap Latch; Large Comfortable Handle.
Thick Foam Padding And Double Padlock Tabs; Made In Usa.
Rugged Polypropylene With Handsome Textured Finish.
For Automatics And Scoped Revolvers With Barrels Measuring 6 Inches Or Less.
Features
- Outside Dimensions: 13.1" x 9.7" x 3.2"; Inside Dimensions: 12.5" x 8.1" x 3.0"
- For automatics and scoped revolvers with barrels measuring 6 inches or less
- Snap latch; Large comfortable handle
- Rugged polypropylene with handsome textured finish
- Thick foam padding and double padlock tabs; Made in USA
- See more on Amazon...
First Available: 03/20/2011
Brand: MTM | Manufacturer: MTM
Dimensions: 3.20 x 13.10 x 9.70 inches | Weight: 1.01 Pounds
See On Amazon #7
Flambeau Outdoors 1011 Safe Shot 10" Pistol Pack Case, Portable Firearm Storage Accessory,Black
Asin: B000LN4LKG | Model: 1011 | PartNumber: 1011 | Ean: 0071617810108 | UPC: 071617810108
Easy-To-Carry: The Pistol Pack Gun Case Weighs Just .75 Lbs So That It Is Lightweight And Easy To Carry. It Has An Integrated Carrying Handle For A Secure Grip..
Specifications: Interior Dimensions Are 9.75" L X 6" W X 2.75" D. Proudly Made In The U.S.A. Meets Tsa And Airline Safe Requirements..
Sleek Design: Flambeau Outdoors Pistol Pack Cases Feature A Sleek, Contemporary Design. The Simple, Slim Profile Is Stackable For Easy, Compact Storage..
Airline Travel Safe: This Gun Case Has (2) Secure Sliding Latches And Is Lockable To Meet Tsa And Airline Safe Requirements For Secure Air Travel. Locks Not Included..
Features
- RUGGED CONSTRUCTION: The heavy-duty plastic construction of the Pistol Pack Case protects your weapon from general wear and tear. Features convoluted foam interior cushioning.
- AIRLINE TRAVEL SAFE: This gun case has (2) secure sliding latches and is lockable to meet TSA and airline safe requirements for secure air travel. Locks not included.
- EASY-TO-CARRY: The Pistol Pack Gun Case weighs just .75 lbs so that it is lightweight and easy to carry. It has an integrated carrying handle for a secure grip.
- SLEEK DESIGN: Flambeau Outdoors Pistol Pack Cases feature a sleek, contemporary design. The simple, slim profile is stackable for easy, compact storage.
- SPECIFICATIONS: Interior dimensions are 9.75 L x 6 W x 2.75 D. Proudly made in the U.S.A. Meets TSA and airline safe requirements.
- See more on Amazon...
First Available: 01/01/2018
Brand: Flambeau | Manufacturer: Flambeau Inc.
Dimensions: 3.25 x 10.50 x 8.50 inches | Weight: 0.77 pounds
Warranty: 1 year limited warranty against manufacturer's defects.
See On Amazon #8
Kinghardcase Hard Pistol Cases - Waterproof, Compatible with 7 Pistols & 16 Magazines - Durable Gun Case for Collectors & Enthusiasts With Desiccant
Asin: B0CTK96X9H | Model: KHC-1136968 | PartNumber: KHC-1136968 | Ean: 0783798122399 | UPC: 783798122399
【Shock-Absorbing Foam Interior】: Your Multi Pistol Case Hard Shell Carrier Will Surround Your 7 Pistols And 16 Magazine With Multiple Protective Firearm Foam Layers For Optimal Defense During Travel And While Your Gun Is In Storage..
【Tsa Approved】: Due The Importance Of Carrying Your Firearms Safely And Securely. We Have Developed Our Durable Heavy Duty Lockable Storage – Just For Enthusiasts! Two Metal Reinforced Padlock Points That Allow You Supplied Padlock Ensure Your Gear Remains Safe And Secure..
【Multifunctional Module Design】By Dismantling The Internal Foam Module, The 7-Gun Capacity Version Can Easily Be Modified To Hold 5 Guns, While Also Accommodating Other Handgun Accessories Such As Goggles, Handgun Holsters, Gloves, Ammunition, Carefully Foam Design Allows For Different Configurations For The Price Of One!.
【Hign Quality Carring Protector】: 100% Waterproof (Ip67) & Lightweight And Strong Hard Pistol Case With A Built-In Pressure Release Valve. Its Abs Materia Construction Makes Your Firearms Will Be Protected Behind Impact-Resistant Polymer Composite Plastic - Offering Optimal Defense From Drops And Impacts..
Features
- Custom Pre-Cut Compartments :Compatible with 7 handguns and 16 magazines. Carefully designed foam for easy storage of firearms and magazines. Pre-Cut design compatible with most handgun models on the market, such as for Glock, Sig Sauer and other firearms with a length and size of less than 11 inches.Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner.
- Hign Quality Carring Protector : 100% Waterproof (IP67) & Lightweight and Strong Hard Pistol Case with a built-in pressure release valve. Its ABS materia construction makes your firearms will be protected behind impact-resistant polymer composite plastic - offering optimal defense from drops and impacts.
- Shock-Absorbing Foam Interior : Your multi pistol case hard shell carrier will surround your 7 pistols and 16 Magazine with multiple protective firearm foam layers for optimal defense during travel and while your gun is in storage.
- Multifunctional Module Design By dismantling the internal foam module, the 7-gun capacity version can easily be modified to hold 5 guns, while also accommodating other handgun accessories such as goggles, handgun holsters, gloves, ammunition, carefully foam design allows for different configurations for the price of one!
- TSA Approved : Due the importance of carrying your firearms safely and securely. we have developed our durable heavy duty lockable storage just for Enthusiasts! Two metal reinforced padlock points that allow you supplied padlock ensure your gear remains safe and secure.
- See more on Amazon...
Brand: Kinghardcase
Dimensions: 16.90 x 13.70 x 7.00 inches
See On Amazon #9
Kinghardcase Tactical Hard Pistol Revolver Case - DIY Water & Shock Proof with Foam, TSA Approved - Gun Case for Revolver Case
Asin: B0CSVMX196 | Model: KHC-1135954 | PartNumber: KHC-1135954 | Ean: 0783798122412 | UPC: 783798122412
【Waterproof Protection】This Gun Case Is Water And Shockproof, Making It Perfect For Tactical Use In Any Environment..
【 Compatible 】 This Hard Pistol Case Measures 13.39 * 11.42 * 4.33 Inches And Can Accommodate Most Pistol Models,.
【Reliable Quality】Constructed From High-Strength Abs And Upgrade Eva, Our Gun Case Offers Superior Impact Resistance, Anti-Collision, And Anti-Scratch Protection..
【Custom Sponge】With Its Diy Customizable Foam, You Have Complete Control Over How Your Revolver Pistol Is Stored And Transported.Providing Extra Compatibility And A Snug Fit..
Features
- Custom Fit Keep your firearms secure and organized with the Kinghardcase Hard Pistol Case that can carry up to Revolver pistols.
- Custom Sponge With its DIY customizable foam, you have complete control over how your Revolver Pistol is stored and transported.providing extra compatibility and a snug fit.
- Waterproof Protection This gun case is water and shockproof, making it perfect for tactical use in any environment.
- Reliable Quality Constructed from high-strength ABS and upgrade EVA, our gun case offers superior impact resistance, anti-collision, and anti-scratch protection.
- Compatible This Hard Pistol Case measures 13.39 * 11.42 * 4.33 inches and can accommodate most pistol models,
- See more on Amazon...
Brand: Kinghardcase
See On Amazon #10
Case Club 8 Pistol and 12 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust
Asin: B08YJ5WS1Q | Model: 8 Pistol Case | PartNumber: 8 Pistol Case | Ean: 0850021069810 | UPC: 850021069810
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Case Is Ideal For Police Departments, Military, Firearm Instructors & Those Who Have Large Pistol Collections..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 8 semi-auto pistols, 12 magazines (+8 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #11
Allen Company 13" Soft Pistol Case - Made with Genuine Suede Leather and a Faux Sherpa Lining - Gun Storage Accessory with Lockable Zipper - Heavy-Duty Handgun Protection and Security - Brown
Asin: B084BKWT17 | Model: 86-13 | PartNumber: 86-13 | Ean: 0026509044857 | UPC: 026509044857
Versatile Usage: This Case Can Also Be Used For Any Small Handgun Under 13 Inches, Making It A Versatile Addition To Your Hunting And Shooting Accessories..
Allen Co: We Share Your Passion For The Great Outdoors. Our Unwavering Dedication Lies In Crafting Superior Hunting, Shooting, And Archery Gear That Combines Quality And Value..
Easy To Carry: The Case's Small Size And Lockable Zipper Make Transporting Your Gun To And From Any Location Easy..
Soft Case: This 13-Inch Gun Bag Has A Soft Faux Sherpa Lining And A Genuine Suede Leather Cover That Protects Against Scratches, Dings, And Other Potential Damages..
Features
- FOR HANDGUNS: This case fits most handgun models for both hunting and the shooting range, providing a secure and snug fit for optimal protection.
- SOFT CASE: This 13-inch gun bag has a soft faux sherpa lining and a genuine suede leather cover that protects against scratches, dings, and other potential damages.
- VERSATILE USAGE: This case can also be used for any small handgun under 13 inches, making it a versatile addition to your hunting and shooting accessories.
- EASY TO CARRY: The case's small size and lockable zipper make transporting your gun to and from any location easy.
- ALLEN CO: We share your passion for the great outdoors. Our unwavering dedication lies in crafting superior hunting, shooting, and archery gear that combines quality and value.
- See more on Amazon...
Brand: Allen Company | Manufacturer: Allen Company
Dimensions: 2.00 x 14.25 x 8.25 inches | Weight: 0.56 pounds
Warranty: 1 year manufacturer
See On Amazon #12
Eylar Hard Gun Case Water & Shock Proof with Foam 16 inch 13 inch 6.87 inch (Black)
Asin: B097QF1KPD | Model: SA00035 | PartNumber: SA00035 | Ean: 0810079680511 | UPC: 810079680511
Pressure Equalization Valve Including 3 Layers Of Foam Padding: 1 Customizable Pull And Pluck Cube, 1 Solid Bottom Pad And 1 Top Egg Crate Layer..
Fits 3 - 4 Standard Pistols Or Handguns (Depends On Configuration) - Includes A Limited Lifetime Warranty..
Meets Tsa Requirements With Lockable Fittings..
Ip67 Water Proof, Shock Proof, And Dust Proof..
Features
- Outer: 16" x 13" x 6.87" Inner: 14.62" x 10" x 6"
- IP67 Water Proof, Shock Proof, and Dust Proof.
- Pressure equalization valve including 3 layers of foam padding: 1 customizable pull and pluck cube, 1 solid bottom pad and 1 top egg crate layer.
- Meets TSA Requirements with Lockable Fittings.
- Fits 3 - 4 Standard Pistols or Handguns (depends on configuration) - Includes a limited lifetime warranty.
- See more on Amazon...
Brand: Eylar | Manufacturer: Eylar
Dimensions: 13.00 x 16.00 x 6.87 Inches
See On Amazon #13
Case Club 6 Pistol and 21 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7LFJN0 | Model: 6 Pistol Case | PartNumber: 6 Pistol Case | Ean: 0856792005095 | UPC: 856792005095
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used Even With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 6 Pistol Version To A 5 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 6 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations!.
Case Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 6 pistols, 21 magazines (+6 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 6 pistol version to a 5 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 6 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used even with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #14
Case Club 6 Pistol & 20 Magazine Case with Accessory Pocket. Pre-Cut, Heavy Duty, Waterproof, with Silica Gel for Gun Rust Prevention (Upgraded Gen-2)
Asin: B00K7KQS5O | Model: 6 Pistol & Accessory Case | PartNumber: 6 Pistol & Accessory Case | Ean: 0856792005064 | UPC: 856792005064
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 6 Pistol & Accessory Version To A 6 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 12 While Adding Both Modules Increases It To 20. Quickly Convert It Back To The 6 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack, Getting A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 6 pistols and up to 20 magazines (when used with magazine modules), or 6 pistols, 8 mags, and an accessory pocket (when magazine modules are removed). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack, getting a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer lengths.
- Easily convert the case from a 6 pistol & accessory version to a 6 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 12 while adding both modules increases it to 20. Quickly convert it back to the 6 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #15
CASEMATIX Compact Locking Pistol Case Fits Small 9mm Pistols and Extra Clip, Portable EVA Handgun Case with Foam, Carabiner Clip, Water Resistant Gun Case and Fanny Pack Style Shoulder Strap
Asin: B0CGSQH1X2 | Model: HGC7-BLACK | PartNumber: HGC7-BLACK
Superior Portable Pistol Bag Protection: The Durable Eva Exterior Of Our Hard Gun Case For Pistols Is 8.5" X 6" X 2.25". It Is Constructed From Water Resistant Rigid Eva With Two Heavy Duty Waterproof Zippers That Are Double Stitched Along The Seam.
Easy Access Design And Lock: Built In Programmable Lock Features Metal Zipper Pullers That Securely Snap In. Cross Body Shoulder Strap And Zippers Allow The Case To Open Vertically For A Quick Pull Of Your Gun. The Belt Anchor Prevents It Moving Up.
Dense Padding: The Inside Measures 7.5" X 5.5" To Provide A Compact 9Mm Gun Case For Carrying Your Concealed Handgun And Extra Clip. Pistol And Clip Slide Into Snug Fit Elastic Bands. The 1" Convoluted Foam Lid Then Compresses To Prevent Movement.
Concealed Carry Gun Bag For Pistols 9Mm: This Gun Case Has Been Specifically Designed To Provide A New Way To Transport Your Favorite Compact Pistol. The Sleek Shape Allows It To Be Securely Fastened To Your Body Or Thrown Inside Larger Handgun Bags.
Features
- CASEMATIX Premium EVA Locking Gun Case For Handguns: Rugged construction with snap in zippers, padded interior foam and built in metal body anchor for extra security. Throw the strap over your shoulder and clip the bottom carabiner to your belt loop
- Concealed Carry Gun Bag For Pistols 9mm: This gun case has been specifically designed to provide a new way to transport your favorite compact pistol. The sleek shape allows it to be securely fastened to your body or thrown inside larger handgun bags
- Superior Portable Pistol Bag Protection: The durable EVA exterior of our hard gun case for pistols is 8.5 x 6 x 2.25. It is constructed from water resistant rigid EVA with two heavy duty waterproof zippers that are double stitched along the seam
- Dense Padding: The inside measures 7.5 x 5.5 to provide a compact 9mm gun case for carrying your concealed handgun and extra clip. Pistol and clip slide into snug fit elastic bands. The 1 convoluted foam lid then compresses to prevent movement
- Easy Access Design and Lock: Built in programmable lock features metal zipper pullers that securely snap in. Cross body shoulder strap and zippers allow the case to open vertically for a quick pull of your gun. The belt anchor prevents it moving up
- See more on Amazon...
Brand: CASEMATIX | Manufacturer: CASEMATIX
See On Amazon #16
CASEMATIX 13" Two Gun Hard Case for 2 Handguns - TSA Approved Waterproof & Shockproof 2 Pistol Hard Case, Double Handgun Case with Accessory Storage for Multiple Magazines and Other Accessories
Asin: B087VV1MNV
Soft, Shock-Absorbing Foam Interior: Your Multi Pistol Case Hard Shell Carrier Will Surround Your Two Pistols With Multiple Protective Firearm Foam Layers For Optimal Defense During Travel And While Your Gun Is In Storage..
Padlock Rings For Extra Security: Looking For Lockable Gun Cases For Pistols? You Can Add Padlocks (Not Included) To The Small Pistol Case To Keep Your Equipment Extra Secure. Exterior Dimensions: 13" X 11.5" X 6".
The Perfect Compartments: The Casematix 2 Gun Cases For Pistols Features Two 2" Layers Of Completely Customizable Pre-Diced Foam, Allowing You To Create Specialized Compartments For Your Two Pistols, Multiple Magazines, Ammo Box And More..
Waterproof And Airtight Construction: Protect Your Precious Gear From Water Damage! This Casematix 2 Pistol Case Features A Waterproof And Airtight O-Ring Seal To Best Protect Your Accessories. Don't Settle For Sub-Par Firearm Travel Cases!.
Features
- Crushproof Dual Handgun Carrying Case: Unlike with soft cases, your two firearms will be protected behind impact-resistant polymer composite plastic - offering optimal defense from drops and impacts. Interior dimensions: 11" x 7.5" x 4"
- Waterproof and Airtight Construction: Protect your precious gear from water damage! This CASEMATIX 2 pistol case features a waterproof and airtight o-ring seal to best protect your accessories. Don't settle for sub-par firearm travel cases!
- Soft, Shock-Absorbing Foam Interior: Your multi pistol case hard shell carrier will surround your two pistols with multiple protective firearm foam layers for optimal defense during travel and while your gun is in storage.
- The Perfect Compartments: The CASEMATIX 2 gun cases for pistols features two 2 layers of completely customizable pre-diced foam, allowing you to create specialized compartments for your two pistols, multiple magazines, ammo box and more.
- Padlock Rings for Extra Security: Looking for lockable gun cases for pistols? You can add padlocks (not included) to the small pistol case to keep your equipment extra secure. Exterior dimensions: 13 x 11.5 x 6
- See more on Amazon...
Brand: CASEMATIX | Manufacturer: CASEMATIX
See On Amazon #17
Case Club 7 Pistol and 14 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K8BB8ZM | Model: 7 Pistol Case | PartNumber: 7 Pistol Case | Ean: 0856792005118 | UPC: 856792005118
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Case Is Ideal For Police Departments, Military, Firearm Instructors & Those Who Have Large Pistol Collections..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 7 semi-auto pistols, 14 magazines (+7 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #18
Case Club 3 Pistol & Accessory & Up to 23 Magazines Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust (Gen 2)
Asin: B00K7K66CY | Model: 3 Pistol & Accessory Case | PartNumber: 3 Pistol & Accessory Case | Ean: 0856792005057 | UPC: 856792005057
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 3 Pistol & Accessory Version To A 3 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 17 While Adding Both Modules Increases It To 23. Quickly Convert It Back To The 3 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 3 pistols and (up to) 23 magazines with magazine modules or 9 magazines with accessory pocket (+3 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 17 while adding both modules increases it to 23. Quickly convert it back to the 3 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club
See On Amazon #19
MTM 811-40 - 4 Pistol Handgun Case up to 8.5" Revolver, USA Made, Black
Asin: B000KOVN4S | Model: 811-40 | PartNumber: 811-40 | Ean: 0026057308401 | UPC: 026057308401
Holds Up To Four Handguns With 8" Barrels.
Color: Black; Made In Usa.
Rugged Polypropylene With Textured Finish, Thick Foam Padding And Double Padlock Tabs.
Outside Dimensions: 15.5" X 12.2" X 5.6"; Inside Dimensions: 14" X 10" X 5.1".
Features
- Four Pistol, Snap-Latch, Handgun Case
- Outside Dimensions: 15.5 x 12.2 x 5.6; Inside Dimensions: 14 x 10 x 5.1
- Holds up to four handguns with 8 barrels
- Rugged polypropylene with textured finish, thick foam padding and double padlock tabs
- Color: Black; Made in USA
- See more on Amazon...
First Available: 06/15/2010
Brand: MTM | Manufacturer: MTM Case-Gard
Dimensions: 5.60 x 15.50 x 12.20 inches | Weight: 0.99 pounds
Warranty: 5 Year Warranty
See On Amazon #20
10 Pistol 20 Magazine Hard Case, DORO Wheeled Gun Case with MyCaseBuilder Red Custom Foam Insert - Waterproof, Heavy Duty - Tactical Gun/Firearm and Ammunition Holder, 21 x 15.87 x 7.25 Inch, Black
Asin: B07QL3531B | Model: PISTOL10-D21167R | PartNumber: PISTOL10-D21167R | Ean: 0858561006333 | UPC: 858561006333
Lightweight And Strong: Injection Molded Case Is Airtight, Impact And Crush-Resistant, And Includes 5 Cut-To-Length Plugs That Provide Extra Support For Shorter Magazines And Removable Foam Fore-Ledges Accommodate Most Under-Barrel Attachments.
Quality Storage And Protection At An Economical Price: For Added Safety, This Case Keeps Firearms Facing Downrange When Opened And Downward During Traveling, Shopping, And Trips To The Range; Cases Made In Italy, Foam Made In The Usa.
Safe Travels: Safeguards Up To 10 Pistols (With Up To 6-Inch Barrels And Maximum Lengths Of 10.375”) And 20 Magazines With Full-Length Hinges, Corrosion-Free Nylon Pins, An Automatic Pressure Equalization Valve, And Shock-Absorbing Water, Chemical, And Oil-Resistant Multi-Layer Foam.
Ip67-Rated And Tsa-Compliant: Ideal For Travel And Flying With Firearms, Our Heavy-Duty Dual-Pad-Lockable Carrying Case Fits 0.319-Inch Shackles And Features Premium Wheels And A Soft Grip Load-Tested Retractable Extension Handle.
Features
- MILITARY-GRADE FOAM: Our premium 10 pistol 20 mag carry case keeps firearms (with or without most underbarrel/sight attachments) safe and secure with a 100% waterproof, dustproof DORO hard case exterior and a customizable closed-cell polyethylene foam insert
- IP67-RATED AND TSA-COMPLIANT: Ideal for travel and flying with firearms, our heavy-duty dual-pad-lockable carrying case fits 0.319-inch shackles and features premium wheels and a soft grip load-tested retractable extension handle
- LIGHTWEIGHT AND STRONG: Injection molded case is airtight, impact and crush-resistant, and includes 5 cut-to-length plugs that provide extra support for shorter magazines and removable foam fore-ledges accommodate most under-barrel attachments
- SAFE TRAVELS: Safeguards up to 10 pistols (with up to 6-inch barrels and maximum lengths of 10.375 ) and 20 magazines with full-length hinges, corrosion-free nylon pins, an automatic pressure equalization valve, and shock-absorbing water, chemical, and oil-resistant multi-layer foam
- QUALITY STORAGE AND PROTECTION AT AN ECONOMICAL PRICE: For added safety, this case keeps firearms facing downrange when opened and downward during traveling, shopping, and trips to the range; Cases made in Italy, foam made in the USA
- See more on Amazon...
Brand: MY CASE BUILDER | Manufacturer: MyCaseBuilder
Dimensions: 8.86 x 23.78 x 18.62 inches | Weight: 14.10 pounds
See On Amazon
Looking For Something Else?
Search