DURATECH 3-Piece 3-Jaw Gear Puller, 3", 4", 6", Removal Tool for Gears, Pulleys, Bearings, and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8VHX7W | Model: DT3JGP03S | PartNumber: DT3JGP03S | Ean: 0820909680864 | UPC: 820909680864
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4 Or 8-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard, Long, Or Extra-Long Reach..
Use The Duratech 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set To Remove Most Shift-Fitted Parts With Ease. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas. Achieve More With Its Adjustable And Reversible Jaws..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws.
- Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon Similar To DURATECH 3Piece 3Jaw Gear Puller
#1
Thorstone 46pcs Harmonic Balancer Puller Set, Steering Wheel Flywheel Crankshaft Pulley Puller
Asin: B088CKF6PP
🚖Compatilibiyty - Includes 30 Different Bolts And A Four-Yoke Slot, Can Handle A Range Of Jobs On Most Cars, Trucks, Suvs And Small Engine Vehicles..
🚖100% Sale Support -We Back Up All Products For Life, 24*7 Fast Response Customer Service Free All Your Concerns. Sincerely Thanks For Your Support To Thorstone!.
🚖Package - Comes With A Heavy Duty Blow Molded Carrying Case, For Easy Transportation, Safe Storage And Quick Organization..
🚖High-Quality - All Components Are Crafted From Heat Treated Carbon Steel With Oxide Finishes, Helping The Tool Withstand Tough Pulling Jobs And Resist Rust..
Features
- MULTIFUNCTION - Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications.
- HIGH-QUALITY - All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust.
- COMPATILIBIYTY - Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles.
- PACKAGE - Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization.
- 100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
- See more on Amazon...
Brand: Thorstone | Manufacturer: Thorstone
See On Amazon #2
Orion Motor Tech Gear Puller Set, 3" 4" 6" 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal, Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit
Asin: B084SXLVK4 | Model: S00300 | PartNumber: S00300
3 Jaw Design: These Power Steering Pulley Pullers Bite Tightly Onto Your Components With Their Reinforced Jaws And Distribute Even Pulling Force To Remove Parts Without Causing Damage.
Tools For Mechanics: Drop-Forged And Heat-Treated Carbon Steel Builds With Corrosion Proof Coatings Ensure These Pullers Last For Resilient Service With Unrivaled Strength And Durability.
Reversible Jaws: Each Pulley Removal Tool Can Be Reversed To Pull Parts From Either The Inside Or Outside, With The 6" Gear Puller Provides 4 Configurations For A Sure Grip Thanks To Its Dual Fixing Holes.
Better Together: Our Bearing Puller Set Includes Three Puller Sizes, Offering Maximum Spreads Of 3", 4", And 6" And Reaches Of 4.3", 5", And 7.3" To Cover Most Applications.
Features
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3, 4, and 6 and reaches of 4.3, 5, and 7.3 to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 3.00 x 8.00 x 8.00 Inches | Weight: 5.00 pounds
Warranty: 1 year
See On Amazon #3
OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8 Square Drive, Includes 4 Forcing Rods, 6 Piece
Asin: B01AIRR4EY | Model: 25090 | PartNumber: 25090 | Ean: 0076812134868 | UPC: 076812134868
Easy To Use: Unique Spring-Loaded Jaws Hold The Legs In Place When Positioning The Harmonic Balancer Removal Tool, Making Removing And Reinstalling The Harmonic Balancer A Relatively Simple And Inexpensive Process.
Product Specifications: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4", 5-13/32", 6-1/2", And 7-13/32"); Blow-Molded Carrying Case.
Instructions Aand Storage Case Included: Our Harmonic Balancer Pulley Removal Tool Comes With Easy-To-Follow Instructions And A Durable Blow-Molded Carrying Case; Easily Take This Harmonic Balancer Puller Set From Job To Job.
Wide Application: Crankshaft Harmonic Balancer Puller Designed For Use With Model Gm 2000 Generation Ii Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), And Mitsubishi Eclipse (1995).
Features
- For Pressed-On Harmonic Balancers: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers
- Wide Application: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995)
- Easy To Use: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process
- Instructions Aand Storage Case Included: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case; Easily take this harmonic balancer puller set from job to job
- Product Specifications: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4, 5-13/32, 6-1/2, and 7-13/32); Blow-Molded Carrying Case
- See more on Amazon...
First Available: 12/21/2016
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 2.00 x 9.30 x 7.20 inches | Weight: 3.65 pounds
Warranty: OEMTOOLS Limited Lifetime
See On Amazon #4
BILITOOLS Harmonic Balancer Puller Set, Adjustable 3-Jaw Puller for Removing Harmonic Damper Pulley Compatible with Chevy GM Chrysler ect.
Asin: B0B2DR2FF6 | Ean: 6974676371235
Applications: This Set Is Compatible With Chrysler, Compatible With Gm, Compatible With Mitsubishi, Compatible With Cadillac, And Compatible With Oldsmobile Cars, Suvs, Vans, And Pickup Trucks..
Includes: 1 X 3-Jaw Puller, 4 X Forcing Rods, 1 X Forcing Screws, 1 X Storage Case. Dimension: 3/8" Drive Forcing Screw-90 Mm; 4 X Forcing Rods-100 Mm, 135 Mm, 165 Mm, 185 Mm..
Manufacture By High Quality 45# Steel Provides Extra Strength And Longevity With A Black Oxide Finish For Corrosion Resistance..
Designed To Ease The Operation Of Pulling The Balancer Pulley. It Reduces Damage To Both The Pulley And The Shaft. Clevis Pins Allow Jaws To Be Quickly Removed And Installed..
Features
- This Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator.
- Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Clevis pins allow jaws to be quickly removed and installed.
- APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.
- Manufacture by high quality 45# steel provides extra strength and longevity with a black oxide finish for corrosion resistance.
- Includes: 1 x 3-jaw puller, 4 x Forcing rods, 1 x forcing screws, 1 x storage case. Dimension: 3/8 drive forcing screw-90 mm; 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm.
- See more on Amazon...
Brand: BILITOOLS | Manufacturer: BILITOOLS
See On Amazon #5
Orion Motor Tech Bearing Puller Set, 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit
Asin: B0B2DF6LXT | Model: N014-BL | PartNumber: N014-BL
3. Wide Application: The 2 Bearing Splitter Jaws’ 5 Ton Capacity Ensures They Stand Up To Punishing Use; Suitable For Professionals And Home Mechanics And Compatible With Most Vehicles, Atvs, And Light Trucks.
5. Durable Construction: Constructed From Heat Treated Cr-V Steel With Black Oxide Finish, This Pinion Bearing Puller Set Ensures Corrosion Resistance And Long-Term Durability Under Even Punishing Use.
4. Effective Operation: The Knife Like Taper Feature Allows The Jaws To Get Behind Bearings To Securely Grip Any Bearing; The Included Tools Enable You To Reach And Remove Bearings In Tight Spaces Effectively.
2. All-In-One Tool Kit: Our Bearing Separator Set Includes A 3" Bearing Separator Jaw, 2" Bearing Separator Jaw, 6" Yoke, 6-1/4" Forcing Screw, Four 4" Extension Screws, Four 5" Extension Screws, And Two 4-1/2" L-Type Legs.
Features
- 1. VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels
- 2. ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3 bearing separator jaw, 2 bearing separator jaw, 6 yoke, 6-1/4 forcing screw, four 4 extension screws, four 5 extension screws, and two 4-1/2 L-type legs
- 3. WIDE APPLICATION: The 2 bearing splitter jaws 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks
- 4. EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing; the included tools enable you to reach and remove bearings in tight spaces effectively
- 5. DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Weight: 11.00 pounds
Warranty: 1 year
See On Amazon #6
DURATECH 3-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8SR4XV | Ean: 0820909680826 | UPC: 820909680826
Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard Reach..
Jaw Spread: 3In, Jaw Reach: 3-9/16In, Puller: 3T, Maximum Use Range: 75Mm. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4-position reversible jaws offer an inside or outside grip with short, standard reach.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas.
- Jaw Spread: 3in, Jaw Reach: 3-9/16in, Puller: 3T, Maximum use range: 75mm. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #7
Orion Motor Tech Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Set for Removing Harmonic Dampers & Balancers, 3-Jaw Pulley Puller Set Compatible with Chevy GM Chrysler Cadillac Ford More, Red
Asin: B0CGDYXTNT | Model: PD01-GR | PartNumber: PD01-GR
C. Wide Compatibility: Our Harmonic Damper Pulley Puller Set Works For Dampers And Balancers In A Wide Range Of Domestic And Import Vehicles, Compatible With Cadillacs Since 1988, Chevrolet Trucks Since 2003, 1990 Chryslers, Fords Since 1995, Gm Generation Ii Engines, The 1995 Mitsubishi Eclipse, And More!.
E. Convenient Storage Case: This Puller Set Comes With A Rugged Blow-Molded Case, Keeping Everything Organized And Easy To Store Or Transport Between Jobs.
D. Durable Construction: Each Part In This Professional Tool Kit Is Made From Structural-Grade Aisi 1045 Medium Carbon Steel For Superior Strength With A Cataphoretic Electro-Coating For Corrosion-Resistant Durability And Longevity.
B. Safe & Easy Operation: This Mechanic Tool Set Includes A 3-Jaw Puller For A Firm And Secure Grip, A Push Bolt Fitted For 19 Mm Hex Drive And 3/8" Square Drive Tools That Easily Centers Up To Drive The Rods, And 4 Forcing Rods (4", 5.4", 6.2", 7.5") To Keep Your Work Fast And Efficient.
Features
- a. QUICK BALANCER REMOVAL: This harmonic balancer puller kit by Orion Motor Tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt; with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time
- b. SAFE & EASY OPERATION: This mechanic tool set includes a 3-jaw puller for a firm and secure grip, a push bolt fitted for 19 mm hex drive and 3/8 square drive tools that easily centers up to drive the rods, and 4 forcing rods (4, 5.4, 6.2, 7.5) to keep your work fast and efficient
- c. WIDE COMPATIBILITY: Our harmonic damper pulley puller set works for dampers and balancers in a wide range of domestic and import vehicles, compatible with Cadillacs since 1988, Chevrolet trucks since 2003, 1990 Chryslers, Fords since 1995, GM Generation II engines, the 1995 Mitsubishi Eclipse, and more!
- d. DURABLE CONSTRUCTION: Each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity
- e. CONVENIENT STORAGE CASE: This puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Warranty: 1 year warranty
See On Amazon #8
MANNIFEN 2 Jaw Puller, 2 Claw Gears Puller for Removal of Pulley Flywheel Bearing,Small Gear Puller (4inches)
Asin: B0C81B12GL | Model: LM120304 | PartNumber: LM120304
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
The 2 Jaw Bearing Puller Is Made Of Forged Chrome Vanadium Steel Material. It Has High Hardness And Strength. Heat Treatment Process Makes It More Good..
Mark 4"-100Mm Size - The Screw Length Of The Two Jaws Puller Is 4.52Inches/115Mm,Bracket Length:4 Inches/ 100Mm（Due To The Anti-Falling Pin, The Actual Bracket Is Only 90Mm/3.54 Inches For Use ）,Screw Diameter (Top): 12Mm,Screw Diameter (Bottom): 10Mm,Claw Length:4Inches/100Mm(The Actual Length Of The Claw Installed On The Bracket: 67Mm /2.63"), For More Size Description Please See Size Picture..
Small Bearing Puller - Ideal For Removing Miniature Bearings And Other Small Fasteners On Delicate Equipment..
Features
- 2 Jaw Bearing Puller - Perfect for removing small bearings and other fasteners with ease.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Small Bearing Puller - Ideal for removing miniature bearings and other small fasteners on delicate equipment.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Mark 4-100mm size - The screw length of the two jaws puller is 4.52inches/115mm,Bracket Length:4 inches/ 100mm Due to the anti-falling pin, the actual bracket is only 90mm/3.54 inches for use ,Screw Diameter (top): 12mm,Screw Diameter (bottom): 10mm,Claw Length:4inches/100mm(The actual length of the claw installed on the bracket: 67mm /2.63), For more size description please see size picture.
- The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more good.
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: MANNIFEN
Warranty: NO
See On Amazon #9
Harmonic Balancer Damper Pulley Remove Extractor Kit Compatible with Ford, GM, Chrysler, Cadillac, Chevy Trucks, Mitsubishi, Upgraded Version 3 Jaw Puller
Asin: B08M3XFCV1
Function: Designed For Removing Damper Pulleys In Tight Engine Compartments Without Removing The Radiator. This Pulley Is Hard To Access And Remove Dute To Space Limitations In And Around The Engine Compartment.
Tips: If You Try The 3-Jaw Puller Is Not Fit You Car, You Need Replace Another 3 Jaw.
Quality Guarante: Our Harmonic Damper Pulley Tool Made Of High Quality Steel, High Hardness, Not Easy To Break, The Exterior Is Coated With Black Antioxidant Layer, Extended Service Life, And We Offer 12 Month Warranty.
Application: Gm 5.7L V8; Gm 2000 And Newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8;Cadillac 4.5L, 4.6L, And 4.9L V8; Compatible With Chevrolet Trucks (2003-) 4.2L I6, (2004-) 3.5L I5, (2005-) 2.8L I4; Compatible With Ford (1995-) V8 Engine; Mitsubishi Eclipse (1995 - ) 2.0L Dohc Non-Turbo.
Features
- Upgraded Version: Our harmonic damper pulley tool have 6 jaw, 3 thicker jaw fit old vehicle models, 3 thiner fit newest model, because professionally tested, we find 3 thicker jaw can't enter new model vehicle belt pulley, and we design 3 thin jaw to fit the new model. So this update version tool fit many vehicle model, includ newest model
- Application: GM 5.7L V8; GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8;Cadillac 4.5L, 4.6L, and 4.9L V8; compatible with Chevrolet trucks (2003-) 4.2L I6, (2004-) 3.5L I5, (2005-) 2.8L I4; compatible with Ford (1995-) V8 engine; Mitsubishi Eclipse (1995 - ) 2.0L DOHC non-turbo
- Function: Designed for removing damper pulleys in tight engine compartments without removing the radiator. This pulley is hard to access and remove dute to space limitations in and around the engine compartment
- Quality Guarante: Our harmonic damper pulley tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life, and we offer 12 month warranty
- Tips: if you try the 3-jaw puller is not fit you car, you need replace another 3 jaw
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #10
OriGlam Two Jaws Bearing Puller/Remover, Adjustable Two Jaw Puller Tool, Bearing Puller Tool, Carbon Steel Pump Pulley Remover
Asin: B099K7KRCN | Model: HAD_B0I | PartNumber: HAD_B0I
√ Easy To Use - Use The Two Jaws To Catch The Bearing; Rotate The Mandrel With The Thread; Slowly Pull Out The Bearing Of The Shaft..
√ Widely Use - This 2 Jaw Bearing Puller Widely Use In Various Bearings That Are Not Easy To Disassemble. Can Also Be Used For Automotive Flywheel, Motorcycle Wheel,Scooter Motorcycle Bearing And Gear And So On..
√ Get Into Tight Hard-To-Reach Spots- This 2 Jaw Puller Tool Can Remove Bearing Or Gears, Pulleys And Flywheels Off A Shaft In Hard-To-Reach Spots Without Damage Your Application..
√ Adjustable - 2 Jaw Bearing Remover Can Adjust The Clamping Depth. Adjustable Diameter 30-80Mm. Have Reversible Claw Legs Make It Suitable For Use As An Internal Or External Bearing Puller. The Reasonable Design Of The Claw Will Not Fall Off When Force Is Applied..
Features
- High Quality - The 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.
- Adjustable - 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-80mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.
- Easy to Use - Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft.
- Get into Tight Hard-To-Reach Spots- This 2 Jaw Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application.
- Widely Use - This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 1.18 x 7.09 x 3.94 inches
See On Amazon #11
BILITOOLS 10" 2-Jaw Gear Puller, Internal External for Removal of Pulleys Flywheels Bearings & Gears
Asin: B0B3119P2Z | Ean: 6974676371341
2 Jaw Gear Puller Can Be Reversed To Pull Parts From Either The Inside Or Outside. The Jaws Allows For Easy Gripping And Access To Tight Spaces..
There Are 5 Different Sizes Of Jaw Puller For You To Choose To Deal With Different Parts (Small, Medium And Large): 3", 4", 6", 8", 10".
The Button Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
This 2 Jaw Gear Puller Is Made With Premium Heat-Treated Cr-V Steel To Ensure No Breakages Or Bend Occur From The High Tension Experienced During Pulling..
Features
- 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.
- 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.
- The button makes it easily to change the puller into internal or external gear puller.
- There are 5 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 3, 4, 6, 8, 10
- See more on Amazon...
Brand: BILITOOLS | Manufacturer: BILITOOLS
Dimensions: 3.94 x 12.60 x 2.36 inches | Weight: 5.72 pounds
See On Amazon #12
MOFEEZ 3" 4" 6" 3 Jaw Gear Bearing Puller Removal Tool for Slide Gears, Pulley, and Flywheel (Silver)
Asin: B0BRXS9QVS | Model: 99MF18006-3 | PartNumber: 99MF18006-3 | Ean: 0647535997728 | UPC: 647535997728
3 Or 6 Position Design: The Universal And Reversible Jaws Offer Versatile Inside Or Outside Grip Along With Short Or Long Reach; The 3-Inch And 4-Inch Gear Puller Has 3 Positions And The 6-Inch Gear Pullers Have 6 Positions..
Package Contents: Included Is A 3-Inch Gear Puller With A 4.5-Inch Jaw Spread And 1.5-Inch Jaw Reach, 4-Inch Gear Puller With A 6.25-Inch Jaw Spread And 2.5-Inch Jaw Reach, And A 6-Inch Gear Puller With A 8.75-Inch Jaw Spread And 4.75-Inch Jaw Reach..
Built To Last: All Parts Are Made With Premium Carbon Steel For Maximum Strength. The Jaws Are Galvanized To Provide Superior Corrosion Resistance And Long Service Life..
Features
- DAMAGE-FREE REMOVAL: This Mofeez 3 jaw puller removal tool makes removal side gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more simple and damage-free. It can be worked with your wrench, ratchet, or spanner.
- BUILT TO LAST: All parts are made with premium carbon steel for maximum strength. The jaws are galvanized to provide superior corrosion resistance and long service life.
- 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
- PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
- See more on Amazon...
Brand: MOFEEZ | Manufacturer: Mofeez
Dimensions: 4.41 x 8.86 x 4.92 inches | Weight: 5.35 pounds
See On Amazon #13
Harmonic Balancer Puller Set, 46 Pcs Flywheel Steering Wheel Puller Kit Gear Puller Yoke Crankshaft Pulley Puller
Asin: B08953THXP | Ean: 0793345498037 | UPC: 793345498037
The Floating Swivel Prevents Damage To The Shaft Ends.
Set Includes Yoke, Pressure Screw, And Pulling Screws In A Molded Storage Case.
Yoke Is Heat-Treated Alloy Steel For Strength And Durability.
30 Different Size Bolts Included.
Features
- Kit features four yoke slots allowing unit to be used for two or three-hole applications
- 30 Different size bolts included
- The floating swivel prevents damage to the shaft ends
- Yoke is heat-treated alloy steel for strength and durability
- Set includes yoke, pressure screw, and pulling screws in a molded storage case
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan Tools
Dimensions: 1.97 x 11.81 x 8.66 inches | Weight: 4.65 Pounds
See On Amazon #14
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627
Asin: B003TO9YDS | Model: 3627 | PartNumber: 3627 | Ean: 0634746243133, 0094715613921, 0821710362796, 0787721780809, 0082171036279, 0765042375089 | UPC: 821710362796, 094715613921, 765042375089, 634746243133, 082171036279, 787721780809
Pullers Can Also Be Converted To Two- And Three-Leg Pullers.
Legs Index Into Position And Stay In Place, Letting You Easily Support The Puller And Quickly Connect Each Jaw One At A Time To The Pulley Without Help.
Features
- Ratcheting pullers have a time-saving, indexing jaw design
- Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help
- Pullers can also be converted to two- and three-leg pullers
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GEARWRENCH
Dimensions: 2.00 x 11.50 x 7.90 inches | Weight: 5.13 pounds
Warranty: Standard Limited Lifetime
See On Amazon #15
OriGlam Adjustable Two Jaw Bearing Gear Puller Remover Tool, 2 Inch Carbon Steel Pump Removing Kit for Motorcycle
Asin: B07GFLBY1R | Model: AMT_002_1 | PartNumber: AMT_002_1 | Ean: 4895192453569
√ Adjust Screw Design And Convenient To Repaired Different Size Gears And Bearing..
√ Fit For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel , Car Wheel, Machine Wheel And So On..
√ Give You Positive Pulling Power To Remove Bearings Groove Pulleys On Alternator And Power Steering Pumps..
√ Special Heat Treatment Processing. Long Use Life..
Features
- Made of overall chromium vanadium steel, it is durable.
- Special heat treatment processing. Long use life.
- Adjust screw design and convenient to repaired different size gears and bearing.
- Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
- Fit for automotive flywheel, motorcycle wheel, bicycle wheel , car wheel, machine wheel and so on.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 0.79 x 5.91 x 3.94 inches
See On Amazon #16
ChgImposs 2 Inch Two Claw Puller Separate Lifting Device Pull Strengthen Bearing Auto Mechanic Hand Tools for Bearing Maintenance
Asin: B07HQR3YT5 | Ean: 4895192455570
Made Of Carbon Steel Material For Strength And Longevity, It Is Durable..
Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Steel Drive Screw Is Cold-Rolled And Acme-Threaded To Give You Smooth Performance Even Under High Stress.
Removal Tool Kit For Slide Gears, Pulley, And Flywheel Makes Removal Simple And Damage-Free.
Features
- Pull Size: 2 inch; Open Maximum Width: 35mm / 1.38"; Open Maximum Depth: 45mm / 1.77"
- Removal tool kit for slide gears, pulley, and flywheel makes removal simple and damage-free
- Made of carbon steel material for strength and longevity, it is durable.
- Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
- Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
See On Amazon #17
ARES 71002 - Harmonic Balancer Puller Set - Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator - Storage Case Included
Asin: B079J6T6JB | Model: 8542036071 | PartNumber: 8542036071 | Ean: 0818765027800 | UPC: 818765027800
Common Applications: This Set Is Compatible With Chrysler, Compatible With Gm, Compatible With Mitsubishi, Compatible With Cadillac, And Compatible With Oldsmobile Cars, Suvs, Vans, And Pickup Trucks..
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We're Proud To Help This Great Organization..
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools That Make An Impact. You Are Backed By Our Performance Assurance. If You Have Any Issues With Your Ares Harmonic Balancer Puller Set Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Includes: This High Quality Set Includes A 3-Jaw Puller, Four Lengths Of Forcing Rods, A Forcing Screw With A 3/8-Inch Square Drive For Use With A Ratchet And A 3/4-Inch Hex For Wrench Or Socket Use. It Also Includes A High Quality Storage Case So You'll Never Have To Go Looking For A Tool Again!.
Features
- ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.
- INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!
- COMMON APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance. If you have any issues with your ARES harmonic balancer puller set set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
- See more on Amazon...
First Available: 01/01/2024
Brand: ARES | Manufacturer: ARES
Warranty: Performance Assurance Limited Lifetime Warranty
See On Amazon #18
Performance Tool W137P 6-Inch 3-Jaw Gear Puller with Reversible Design for Vehicle Maintenance and Repair, Drop-Forged Steel, Chrome Plating
Asin: B000V4FIRK | Model: W137P | PartNumber: W137P | Ean: 0039564101465, 0027077003987 | UPC: 027077003987, 039564101465
Drop Forged For Strength.
Durable Construction: Mig Welding; Industrial Grade Air Hose With Standard Tire Air Chuck.
Chrome Plated Finish.
Chrome Vanadium Jaws.
Features
- Heat treated center screw
- Chrome vanadium jaws
- Drop forged for strength
- Chrome plated finish
- DURABLE CONSTRUCTION: MIG welding; Industrial grade air hose with standard tire air chuck
- See more on Amazon...
First Available: 11/06/2019
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 3.30 x 8.80 x 4.30 inches | Weight: 0.53 pounds
Warranty: Manufacturer Warranty
See On Amazon #19
VEVOR Gear Puller Set, 3" and 7" Puller Kit, 3 Jaw Gear Bearing Flywheel Pulley Removal Tool, 2 or 3 Reversible Jaws Wheel Puller, Vertically and Horizontally, External and Internal, 2-Piece
Asin: B0CKPLHKW3 | Model: XC6527 | PartNumber: XC6527 | Ean: 0840349968629 | UPC: 840349968629
Flexible Jaw Conversion: Effortlessly Switch Between A Two-Jaw And Three-Jaw Wheel Puller For Versatile Pulling Power. Use Two Jaws For Strong Pulling Force, Ideal For Small Bearings And Gears. Three Jaws Form A Stable Triangular Structure, Perfect For Securely Gripping Heavy Components During Disassembly..
Flexible Usage: You Can Easily Reverse Install The Jaw To Access Narrow Spaces, Making It Perfect For Grasping Small-Diameter Hollow Parts. Conversely, The Forward Jaw Is Ideal For Grabbing Large Parts And Adapting To Various Machines' Bearings And Spare Parts..
Built For Durability: Our Gear Puller Is Built To Withstand Tough Tasks. The High-Temperature Quenched Screw, Finely Processed Hook And Claw, And Industrial-Grade 45# Steel Construction Ensure Longevity. A Rust And Corrosion-Resistant Coating Adds To Its Durability..
Effortless Assembly: With Our Two-Step Quick Installation, You Can Have Your Pulley Puller Ready To Use In Just One Minute. Unlike Traditional Pullers, Our Design Minimizes The Number Of Screws And Nuts Required, Reducing The Risk Of Loose Parts During Frequent Hook Switching..
Features
- Complete 2-Piece Set: Our gear puller set comes in two convenient sizes, 3 inches and 7 inches, making it perfect for disassembling various components such as gears, pulleys, bearings, and flywheels. Whether you're a mechanic or run an auto repair shop, these tools are essential for your needs.
- Effortless Assembly: With our two-step quick installation, you can have your pulley puller ready to use in just one minute. Unlike traditional pullers, our design minimizes the number of screws and nuts required, reducing the risk of loose parts during frequent hook switching.
- Flexible Jaw Conversion: Effortlessly switch between a two-jaw and three-jaw wheel puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.
- Built for Durability: Our gear puller is built to withstand tough tasks. The high-temperature quenched screw, finely processed hook and claw, and industrial-grade 45# steel construction ensure longevity. A rust and corrosion-resistant coating adds to its durability.
- Flexible Usage: You can easily reverse install the jaw to access narrow spaces, making it perfect for grasping small-diameter hollow parts. Conversely, the forward jaw is ideal for grabbing large parts and adapting to various machines' bearings and spare parts.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Weight: 5.50 pounds
See On Amazon #20
MANNIFEN 2-Jaw Gear Puller, 2 Claw Gears Puller for Removal of Pulley Flywheel Bearing, Puller Tool Separate Lifting Device 10 Inch
Asin: B0C8SBSLLG | Model: LM120303-4 | PartNumber: LM120303-4
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
Steering Wheel Puller: The Steering Wheel Puller Is Designed For Easy Operation, Allowing Users To Safely And Efficiently Remove The Steering Wheel Without Causing Damage..
Mark 10"-250Mm（2 Jaw Gear Puller 10 Inch） Size - The Screw Length Of The Two Jaw Puller Is 9.64Inches/245Mm,Bracket Length:10.43 Inches/ 265Mm（Due To The Anti-Falling Pin, The Actual Bracket Is Only 240Mm/9.44 Inches For Use ）,Screw Diameter (Top): 21Mm,Screw Diameter (Bottom): 16Mm,Claw Length:8.18Inches/208Mm(The Actual Length Of The Claw Installed On The Bracket: 146Mm /5.74Inches), For More Size Description Please See Size Picture..
2 Jaw Bearing Puller - Ideal For Dismounting Bearings And Other Fasteners On Delicate Equipment..
Features
- The 10 inch two jaw gear puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more good.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- 2 jaw bearing puller - ideal for dismounting bearings and other fasteners on delicate equipment.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Mark 10-250mm 2 jaw gear puller 10 inch size - The screw length of the two jaw puller is 9.64inches/245mm,Bracket Length:10.43 inches/ 265mm Due to the anti-falling pin, the actual bracket is only 240mm/9.44 inches for use ,Screw Diameter (top): 21mm,Screw Diameter (bottom): 16mm,Claw Length:8.18inches/208mm(The actual length of the claw installed on the bracket: 146mm /5.74inches), For more size description please see size picture.
- Steering wheel puller: The steering wheel puller is designed for easy operation, allowing users to safely and efficiently remove the steering wheel without causing damage.
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: MANNIFEN
Warranty: NO
See On Amazon
Looking For Something Else?
Search