DEVMO 5pcs 3.3V 5V TXS0108E High Speed Full Duplex Shifter 8 Way 8 Channel Logic Level Conversion Module 8-Bit 8 CH Logic Level Bi-Directional Voltage Converter Compatible with Ar-duino Raspberry Pi
Asin: B08HK8GW7R
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★Vcca Side Voltage Range: 1.2V-3.6V; Vccb Side Voltage Range: 1.65V-5.5V..
★Serial Communication Interface Is Compatible With Uart/Iic/Spi Port, Which Is Easy To Connect..
★You Can Provide Other Common 3.3-5V 1.8-3.3V Level Conversion Capability..
★Provide Two-Way Communication Capabilities..
Features
- 5pcs TXS0108E 8 Way 8 Channel high-speed full-duplex level conversion module.
- Provide two-way communication capabilities.
- VCCA side voltage range: 1.2V-3.6V; VCCB side voltage range: 1.65v-5.5v.
- You can provide other common 3.3-5V 1.8-3.3v level conversion capability.
- Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon Similar To DEVMO 5pcs 3.3V 5V TXS0108E
#1
Comidox 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Power Module Voltage Boost Converter Board 0.9-5V to 5V 5PCS
Asin: B07L76KLRY | Model: CP323 | PartNumber: CP323 | Ean: 0661083425243 | UPC: 661083425243
Input Voltage: 0.9-5V, Output Voltage: 5V, Maximum Output Current: 480 Ma..
Weight: About 1G.
Dimensions: 11Mm X 10.5Mm X 7.5Mm (Ultra-Small Module, 1Mm=0.0393Inch).
Pin 2.54Mm Pitch..
Features
- DC-DC boost converter module, operating frequency 150KHZ, typical conversion efficiency of 85%.
- Pin 2.54MM pitch.
- Input voltage: 0.9-5V, output voltage: 5V, maximum output current: 480 mA.
- Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch)
- Weight: about 1g
- See more on Amazon...
Brand: Comidox | Manufacturer: Comidox
Weight: 0.00 pounds
See On Amazon #2
Anmbest 10 Pack 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply Buck Module 800mA
Asin: B07CP4P5XJ | Model: Anmbest_MD01 | PartNumber: Anmbest_MD01 | Ean: 7898822206532
Applicable For High-Efficiency Linear Regulator Published Active Power Regulator Battery Charger Active Instrument..
Ams1117 Overheat Shutdown Circuit Provides Overload And Over-Temperature Protection..
Applications: Arduino Uno Mega2560; Msp430 Development Board; 3.3V Low Power Consumption Mcu; Fpga/Cpld Pld Programmable Logic Systems; Arm7 Arm9 Arm11 Stm32; Etc..
The Module Is Suitable For Electronic Devices Such As Scm Project Design Needs 5V Power Supply, It Is Simple Dual-Panel Design And The Input Output Using The 2 Pin Single Row Pin For Easy Connection. Ams1117-3.3 Pinout Can Be Easy To Connected With Your Mcu Development And Provide The Contant Power Supply..
Features
- AMS1117-3.3 is a positive Voltage Regulator Step Down Power Supply Module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The module is suitable for electronic devices such as SCM project design needs 5V power supply, It is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection. AMS1117-3.3 pinout can be easy to connected with your MCU development and provide the contant power supply.
- Applicable for high-efficiency linear regulator Published Active Power Regulator Battery Charger Active instrument.
- Applications: Arduino UNO MEGA2560; MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11 STM32; etc.
- AMS1117 overheat shutdown circuit provides overload and over-temperature protection.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: Anmbest
Weight: 0.01 pounds
See On Amazon #3
DC-DC Step Up Power Module Output Voltage 5V DC to DC Boost Converter 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Regulator Voltage Boost Converter Board 0.9-5V to 5V (10)
Asin: B08NCM9ZPQ | Model: Weewooday-Step Up Power-01 | PartNumber: Weewooday-Step Up Power-01
Basic Detail: Input Voltage: 0.9-5V; Output Voltage: 5V; Maximum Output Current: 480 Ma; Please Know The Basic Information About The Product Before You Ordering It.
Attention: The Input Voltage Must Not Be Greater Than Nominal Voltage, Otherwise It Will Burn Out The Template; The Input Power Must Be Greater Than The Output Power, Or The Output Voltage Will Be Less Than The Nominal Voltage.
Dimensions: 11Mm X 10.5Mm X 7.5Mm (Ultra-Small Module, 1Mm=0.0393Inch); Pin: 2.54Mm Pitch; Weight: About 1G.
Frequency And Conversion Efficiency: Dc-Dc Step Up Power Module's Operating Frequency Is 150Khz With Typical Conversion Efficiency Of 85%.
Features
- Widely support: mini DC-DC voltage converter can support 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V
- Frequency and conversion efficiency: DC-DC step up power module's operating frequency is 150KHZ with typical conversion efficiency of 85%
- Basic detail: input voltage: 0.9-5V; Output voltage: 5V; Maximum output current: 480 mA; Please know the basic information about the product before you ordering it
- Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch); Pin: 2.54MM pitch; Weight: about 1g
- Attention: the input voltage must not be greater than nominal voltage, otherwise it will burn out the template; The input power must be greater than the output power, or the output voltage will be less than the nominal voltage
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
Weight: 0.00 pounds
See On Amazon #4
ANMBEST 10PCS Mini Boost Module 3.7V to 5V 8V 9V 12V Step Up Board with LED Indicator for Electronic DIY
Asin: B091CRCZ65 | Ean: 7903265709196
The Maximum Output Current Reaches 1A..
The Led Indicator Can Be Turned Off By The Pad Next To It..
Low Power Consumption..
You Can Easily Convert A Single-Cell Lithium Battery To 5V 8V 9V 12V..
Features
- IInput Voltage: 2.5V~VOUT-0.5V; Output Voltage: can be set to 5V/8V/9V/12V.nput Voltage: 2.5V~VOUT-0.5V; Output Voltage: can be set to 5V/8V/9V/12V.
- You can easily convert a single-cell lithium battery to 5V 8V 9V 12V.
- The maximum output current reaches 1A.
- Low power consumption.
- The LED indicator can be turned off by the pad next to it.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
Weight: 0.02 pounds
See On Amazon #5
DEVMO DC 3V-6V to 400kV 400000V Boost Step-up Power Module High-Voltage Generator
Asin: B07S712WKL | Ean: 0016071890013 | UPC: 016071890013
★Input Voltage: Dc 3 V To 6 V,Input Current: 2 A - 5 A.
★Package Includes:1Pcs 400000V Boost Step-Up Power Module..
★High Pressure Discharge Distance Between: 10 Mm - 20 Mm.To Avoid Burning, Use The Time Limit For 1 Minute..
★High Pressure Type: The Type Of Pulse Current.
Features
- Output voltage: 400000 v(Please pay attention to safety)
- High pressure type: the type of pulse current
- input voltage: DC 3 V to 6 V,Input current: 2 A - 5 A
- High pressure discharge distance between: 10 mm - 20 mm.To avoid burning, use the time limit for 1 minute.
- Package Includes:1pcs 400000V Boost Step-up Power Module.
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #6
Dorhea 7 Pack 3.3V DC-DC Buck Converter 3 Pins AMS1117-3.3V DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply 800mA Buck Module
Asin: B089MZM12H | Model: D13540-1 | PartNumber: D13540-1 | Ean: 0701715434035 | UPC: 701715434035
Applicable For High-Efficiency Linear Regulator Published Active Power Regulator Battery Charger Active Instrument..
Ams1117 Overheat Shutdown Circuit Provides Overload And Over-Temperature Protection. Ams1117-3.3V Buck Converter Soldering Kit Only Supports 3.3V,800Ma Output, So The Load Current Can Not Exceed 800Ma..
Applications: Msp430 Development Board; 3.3V Low Power Consumption Mcu; Fpga/Cpld Pld Programmable Logic Systems; Arm7 Arm9 Arm11 Stm32; Etc..
The Voltage Regulator Converter Module Is Suitable For Electronic Devices, With The Design Of 3 Pins, This Buck Converter Is Easy To Connect Your Mcu Development And Provide Constant Power Supply, Which Suitable For Electronic Devices Such As Scm Project Design Needs 3.3V Power Supply..
Features
- AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The voltage regulator converter module is suitable for electronic devices, with the design of 3 pins, this buck converter is easy to connect your MCU development and provide constant power supply, which suitable for electronic devices such as SCM project design needs 3.3V power supply.
- Applicable for high-efficiency linear regulator Published Active Power Regulator Battery Charger Active instrument.
- Applications: MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11 STM32; etc.
- AMS1117 overheat shutdown circuit provides overload and over-temperature protection. AMS1117-3.3V Buck Converter soldering kit only supports 3.3V,800mA output, So the load current can not exceed 800mA.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
Weight: 0.03 pounds
See On Amazon #7
HiLetgo 5pcs DC-DC 12V to 3.3V 5V Power Module 3.3V 5V 12V Multi Output Voltage Conversion
Asin: B00WG9I3B6 | Model: 3-01-0791 | PartNumber: 3-01-0791 | Ean: 0702949574580 | UPC: 702949574580
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
Teyleten Robot Multi-Function Mini Boost Module 3.7V to 5V/8V/9V/12V Step Up Board 1.5A LED Indicator DIY Voltage Module 10pcs
Asin: B0B4TB9QNY | Ean: 9331632970616
The Front Side Of The Pcb Can Be Seen With The Words A And B. The Output Voltage Can Be Changed By Using The Soldering Iron To Change The Pad On And Off..
Support 5V/8V/9V/12V, The Default Is 12V.
Features
- Small size,product size: 22 11 3.6mm
- Support 5V/8V/9V/12V, the default is 12V
- The front side of the PCB can be seen with the words A and B. The output voltage can be changed by using the soldering iron to change the pad on and off.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.08 x 0.91 x 0.43 inches
See On Amazon #9
DEVMO 2PCS 5V Out, 6V to 12V in AMS1117-5.0 5.0V Step-Down Linear Voltage Regulator Module Compatible with Ar-duino
Asin: B07R55XCDR | Ean: 0741722788561 | UPC: 741722788561
★Pins For Input And Output Connectors Are Solder Onto The Board For Easy Connection..
★Package Includes: 2Pcs 6V - 12V In 5.0V Out Ams1117-5 Step-Down Linear Voltage Regulator Power Converter Module.
★A Pcb-Mounted Led Illuminates When Voltage Is Applied To The Module.
★Output: 5.0V At 800Ma Maximum Current With A 6V Input, 200Ma Maximum Current At 12V Input. The Maximum Current Is Limited By The Regulator's Internal Power Dissipation And It Cannot Provide 800Ma Output At All Input Voltages..
Features
- Input: 6V to 12V DC on + and - terminals
- Output: 5.0V at 800mA maximum current with a 6V input, 200mA maximum current at 12V input. The maximum current is limited by the regulator's internal power dissipation and it cannot provide 800mA output at all input voltages.
- Pins for input and output connectors are solder onto the board for easy connection.
- A PCB-mounted LED illuminates when voltage is applied to the module
- Package Includes: 2PCS 6V - 12V In 5.0V Out AMS1117-5 Step-Down Linear Voltage Regulator Power Converter Module
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #10
Diitao 20PCS AMS1117-5V 3 Pins DC-DC 4.75V-12V to 5V Voltage Regulator Step Down Power Supply Buck 800mA Module
Asin: B0B52TNZXM | Ean: 0701715524491 | UPC: 701715524491
Features: Ams1117-5 Is A Positive Voltage Regulator Buck Power Module With Stable Output, Whose Standby Power Consumption Is Small..
Safety Protection: With Overheat Shutdown Circuit, Overload Protection, Overtemperature Protection, Easy To Use..
Application: Suitable For Single Chip Computer And Other Electronic Equipment Projects..
Easy Connection: It Is A Simple Two-Panel Design, And The Input And Output Use 2-Pin Single-Row Pins For Easy Connection..
Features
- Size:8.6mm x12.33mm/0.3"x0.5";Support DC 4.75-12V input;Fixed voltage:5V;Current output:0.8A.
- Easy connection: It is a simple two-panel design, and the input and output use 2-pin single-row pins for easy connection.
- Features: AMS1117-5 is a positive voltage regulator buck power module with stable output, whose standby power consumption is small.
- Application: Suitable for single chip computer and other electronic equipment projects.
- Safety protection: With overheat shutdown circuit, overload protection, overtemperature protection, easy to use.
- See more on Amazon...
Brand: Diitao | Manufacturer: Diitao
Warranty: Warranty within 6 months
See On Amazon #11
WWZMDiB 12Pcs AMS1117-3.3 DC-DC Buck Converter 4.75~12V to 3.3V Step-Down Power Module LDO 800MA (12 pcs)
Asin: B0BD5BMXBK | Model: 12 pcs | PartNumber: 12 pcs | Ean: 0618202520587, 0705252403066 | UPC: 705252403066, 618202520587
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #12
D-FLIFE 10pcs 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Power Module Voltage Boost Converter Board 0.9-5V to 5V
Asin: B0BZYMQJBX | Ean: 0701715473560 | UPC: 701715473560
Frequency And Conversion Efficiency: Dc-Dc Step Up Power Module's Operating Frequency Is 150Khz With Typical Conversion Efficiency Of 85%.
The Dc To Dc Boost Converter Can Be Powered By Any Suitable Dc Power Source, Such As A Battery, Solar Panel, Rectifier, Dc Generator And So On, Bringing Convenience To Your Life.
Dimensions: 11Mm X 10.5Mm X 7.5Mm (Ultra-Small Module, 1Mm=0.0393Inch); Pin: 2.54Mm Pitch; Weight: About 1G.
Widely Support: Mini Dc-Dc Voltage Converter Can Support 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V.
Features
- DC-DC Step Up Power Module Output Voltage 5V DC to DC Boost Converter 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Regulator Voltage Boost Converter Board 0.9-5V to 5V
- Widely support: mini DC-DC voltage converter can support 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V
- Frequency and conversion efficiency: DC-DC step up power module's operating frequency is 150KHZ with typical conversion efficiency of 85%
- Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch); Pin: 2.54MM pitch; Weight: about 1g
- The DC to DC boost converter can be powered by any suitable DC power source, such as a battery, solar panel, rectifier, DC generator and so on, bringing convenience to your life
- See more on Amazon...
Brand: D-FLIFE | Manufacturer: D-FLIFE
Weight: 0.00 pounds
See On Amazon #13
E-Outstanding 2PCS PFM Control DC-DC 0.9V-5V to USB 5V Boost Step-up Power Supply Module Booster Circuit Board
Asin: B07QKYHFJB | Model: BCB-DC-0.9T5V-2 | PartNumber: BCB-DC-0.9T5V-2 | Ean: 0713871349658 | UPC: 713871349658
The Lamp On The Circuit Board Can Indicate The Working State Of The Circuit Board..
Pcb Size: 34X16x11 Mm/1.34X0.63X0.43 Inches(Lxwxh). Package:2 Pcs..
Directly Use The Usb Interface To Power Usb Interface Devices.This Can Provide Power For Your Mobile Phone, Camera, Single-Chip Microcomputer And Digital Products..
Input 0.9 V ~ 5 V Dc Voltage, Stable Output 5 V Dc Voltage..
Features
- Onboard subminiature PFM control DC/DC boost controller chip.
- Input 0.9 V ~ 5 V dc voltage, stable output 5 V dc voltage.
- The lamp on the circuit board can indicate the working state of the circuit board.
- Directly use the USB interface to power USB interface devices.This can provide power for your mobile phone, camera, single-chip microcomputer and digital products.
- PCB Size: 34x16x11 mm/1.34x0.63X0.43 Inches(LXWXH). Package:2 PCS.
- See more on Amazon...
Brand: E-outstandin | Manufacturer: E-outstandin
Weight: 0.04 pounds
See On Amazon #14
SDTC Tech 5pcs DC-DC Boost Converter 2V-24V to 5V-28V 2A Adjustable Voltage Regulator Micro USB 5V 9V 12V 24V Step Up Power Supply Module
Asin: B07NRLG7ZV | Model: E-2T24-BOOST-5 | PartNumber: E-2T24-BOOST-5 | Ean: 0743832001981 | UPC: 743832001981
Output Current: Suggest To Use In 1A For Long Time Work, And Can Pass The Maximum Current 2A （In A Short Time）..
Mini Module Size: 30X17x14mm / 1.18X0.67X0.55 Inch (Lxwxh), Can Be Easily To Install In All Kinds Of Small Step-Up Voltage Regulation Power Equipment..
Adopt Micro Usb Or Soldering Joints Input, To Get 9V, 12V, 15V, 18V, 24V Voltage From Usb Charger Or Portable Power Source By Moblie Data Cable Conveniently..
Ultra Low Input Voltage: 2V-24V, Super-Wide Output Voltage: 5V-28V, Max Transfer Efficiency Up To 93%..
Features
- Mini DC-DC Boost Converter Board, Suitable for DIY digital device portable power supply, LED power driver and so on.
- Ultra low input voltage: 2V-24V, super-wide output voltage: 5V-28V, max transfer efficiency up to 93%.
- Output current: Suggest to use in 1A for long time work, and can pass the maximum current 2A in a short time .
- Adopt Micro USB or soldering joints input, to get 9V, 12V, 15V, 18V, 24V voltage from USB charger or portable power source by moblie data cable conveniently.
- Mini module size: 30x17x14mm / 1.18x0.67x0.55 inch (LxWxH), can be easily to install in all kinds of small step-up voltage regulation power equipment.
- See more on Amazon...
Brand: SDTC Tech | Manufacturer: SDTC Tech
Weight: 0.04 pounds
See On Amazon #15
AITRIP 10PCS DC-DC Boost Converter Module,1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Power Module Voltage Boost Converter Board 0.9-5V to 5V
Asin: B08RJ8769R | Ean: 0701715454439 | UPC: 701715454439
Pin 2.54Mm Pitch; Dimensions: 11Mm X 10.5Mm X 7.5Mm (Ultra-Small Module, 1Mm=0.0393Inch); Weight: About 1G.
Wide Application: It Is Convenience For Your Life.The Dc To Dc Boost Converter Can Be Powered By Any Suitable Dc Power Source, Such As A Battery, Solar Panel, Rectifier, Dc Generator And So On,.
Widely Support: Mini Dc-Dc Voltage Converter Can Support 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V.
Dc-Dc Boost Converter Module, Operating Frequency 150Khz, Typical Conversion Efficiency Of 85%..
Features
- Input voltage: 0.9-5V, output voltage: 5V, maximum output current: 480 mA
- DC-DC boost converter module, operating frequency 150KHZ, typical conversion efficiency of 85%.
- Pin 2.54MM pitch; Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch); Weight: about 1g
- Widely support: mini DC-DC voltage converter can support 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V
- Wide application: it is convenience for your life.The DC to DC boost converter can be powered by any suitable DC power source, such as a battery, solar panel, rectifier, DC generator and so on,
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.00 pounds
See On Amazon #16
QEBIDUM DC DC Boost Converter, 0.9 V 3V 3.3V 3.7 V to 5V Synchronous Switching Regulator Mini DIY Non-Isolated Adjustable Ultra Low Voltage Step Up Booster Converter Board Module for Arduino (6 packs)
Asin: B0B9SXCXV9 | Model: boost converter module | PartNumber: boost converter module | Ean: 0740727313709 | UPC: 740727313709
Ultra Low Quiescent Current And High Efficiency: The Low Power Dc To Dc Voltage Booster Consumes ？？Μa Quiescent Current, The Convert Efficiency Up To 90%..
Pin 2.54Mm Pitch：The Pin Pitch Of Input And Output Ports Is 2.54Mm, The Boost Converter Module Dc To Dc Pads Are Gold-Plated..
Multiple Protection Functions: The Dc Voltage Booster Is Integrated With Overcurrent Protection, Anti Surge Protection And Output Short Circuit Protection..
Programmable Output Voltage: The Boost Converter Module Default Output Voltage Is Boost Converter 5V, And Boost Converter 3.3V Voltage Output Can Be Obtained By Shorting The Two Pads Of Cn1..
Features
- Support Ultra Low Voltage Startup: Input Voltage Range 0.9V to 5.5V, the dc to dc step up converter is suited for alkaline battery Li-ion or Lipolymer battery powered systems.
- Programmable Output Voltage: The boost converter module default output voltage is boost converter 5v, and boost converter 3.3V voltage output can be obtained by shorting the two pads of CN1.
- Ultra Low Quiescent Current and High Efficiency: The low power dc to dc voltage booster consumes A quiescent current, the convert efficiency up to 90%.
- Multiple Protection Functions: The dc voltage booster is Integrated with overcurrent protection, anti surge protection and output short circuit protection.
- Pin 2.54mm Pitch The pin pitch of input and output ports is 2.54mm, the boost converter module dc to dc pads are gold-plated.
- See more on Amazon...
Brand: QEBIDUM | Manufacturer: QEBIDUM FACTORY
Dimensions: 0.07 x 1.18 x 0.74 inches | Weight: 0.02 pounds
Warranty: 12 months
See On Amazon #17
15Pcs 5V to 3.3V DC-DC Step Down Power Supply Buck Module AMS1117 3.3V 800MA Automatic Adjustable Boost Board Start Limit Voltage
Asin: B09WTVGJL3 | Model: 13397-1 | PartNumber: 13397-1 | Ean: 0701715506930 | UPC: 701715506930
The Module Is Suitable For Electronic Devices Such As Scm Project Design Needs 5V Power Supply, It Is Simple Dual-Panel Design And The Input Output Using The 2 Pin Single Row Pin For Easy Connection..
Ams1117-3.3 Pinout Can Be Easy To Connected With Your Mcu Development And Provide The Contant Power Supply..
Buck Module Input Voltage Must Be Who The Output Voltage Of 1.5 V Or 2 V, Otherwise It Can Not Output The Enough Power!.
Ams1117 Step-Down Power Supply Buck Module The Output: 3.3 V, 800 Ma (The Load Current Can 'T Wining 800 Ma).
Features
- AMS1117 step-down power supply buck module input: 4.5 V DC - 7 V (input voltage must be wining the to the output voltage high 1 V above.)
- AMS1117 step-down power supply buck module the output: 3.3 V, 800 mA (the load current can 't wining 800 mA)
- The module is suitable for electronic devices such as SCM project design needs 5V power supply, It is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection.
- Buck module input voltage must be who the output voltage of 1.5 V or 2 V, otherwise it can not output the enough power!
- AMS1117-3.3 pinout can be easy to connected with your MCU development and provide the contant power supply.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #18
ECSiNG 10PCS 0.9-5V to 5V DC-DC Step-Up Power Module 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Voltage Boost Converter Board 10.6x10.6x7.6mm Module Green
Asin: B0CRSW6ZTW | Model: 810-EN | PartNumber: 810-EN | Ean: 4895243582767
[Usage Precautions] The Input Voltage Cannot Be Greater Than The Nominal Voltage, Otherwise The Module Will Be Burned; The Input Power Must Be Greater Than The Output Power, Otherwise The Output Voltage Will Be Less Than The Nominal Voltage..
[Quantity] Package Includes 10 0.9-5V To 5V Dc-Dc Boost Conversion Modules..
[Efficient Dc-Dc Boost Module] Operates At 150Khz, Offering A Typical Conversion Efficiency Of 85% For Reliable Power Conversion..
[Wide Input Range: 0.9-5V] Accepts An Input Range From 0.9V To 5V, Delivering A Stable 5V Output With A Maximum Current Of 480Ma..
Features
- [Tiny Size: 10.6x10.6x7.6mm] Measures 10.6x10.6x7.6mm with a 2.54mm pin spacing, perfect for compact setups.
- [Wide Input Range: 0.9-5V] Accepts an input range from 0.9V to 5V, delivering a stable 5V output with a maximum current of 480mA.
- [Usage Precautions] The input voltage cannot be greater than the nominal voltage, otherwise the module will be burned; the input power must be greater than the output power, otherwise the output voltage will be less than the nominal voltage.
- [Efficient DC-DC Boost Module] Operates at 150KHz, offering a typical conversion efficiency of 85% for reliable power conversion.
- [Quantity] Package includes 10 0.9-5V to 5V DC-DC boost conversion modules.
- See more on Amazon...
Brand: ECSiNG | Manufacturer: ECSiNG
See On Amazon #19
DEVMO 5PCS IIC I2C Logic Level Converter Bi-Directional Module 4 Channels 5V to 3.3V Shifter Compatible with Ar-duino
Asin: B07SZQMWFS | Ean: 0796753378724 | UPC: 796753378724
★This Level Converter Works With 2.8V And 1.8V Devices..
★Dimensions: 0.63 X 0.52" (16.05 X 13.33Mm).
★The Level Converter Is Very Easy To Use..
★The Board Needs To Be Powered From The Two Voltages Sources (High Voltage And Low Voltage) That Your System Is Using..
Features
- Brand New and High Quality.
- The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using.
- This level converter works with 2.8V and 1.8V devices.
- The level converter is very easy to use.
- Dimensions: 0.63 x 0.52 (16.05 x 13.33mm)
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #20
UMLIFE 10PCS High Efficiency Output 3.3V 5V 9V 12V 5A Mini560 Step Down DC-DC Converter Voltage Regulator Buck Stabilized Power Supply Module
Asin: B098HZPKLX | Ean: 0701715483590 | UPC: 701715483590
The Output Voltage: 9V.
Module Size : 29*18*5.4Mm.
High Conversion Efficiency And Low Heat Generation.
The Input Voltage:11V-20V.
Features
- High efficiency/high stability/high cost performance MINI560 step-down power module
- The input voltage:11V-20V
- The output voltage: 9V
- High conversion efficiency and low heat generation
- Module size : 29*18*5.4mm
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
See On Amazon
Looking For Something Else?
Search