Flashers #3 Grey EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5") - 100% Made in The USA
Asin: B08HVSGR4D | Model: FG3 | PartNumber: FG3
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit..
Features
- MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 4.00 x 7.75 x 7.75 inches
See On Amazon Similar To Flashers 3 Grey EPDM Flexible
#1
Dektite Premium #4 Black EPDM Metal Roof Pipe Flashing, Square Base, Pipe OD 3" to 7"
Asin: B0771T9FLW | Model: DFE104B | PartNumber: DFE104B | Ean: 0687748063056 | UPC: 687748063056
Slide Flashing Down Pipe And Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
20 Year Manufacturer's Warranty Against Manufacturing Defects.
If Trimmed And Installed Correctly, Pipe Flashing Will Not Break Or Crack.
Flashing Base Is 11" X 11" - Pipe Boot Fits 3" To 7" Outside Pipe Diameter.
Features
- Continuous Service Temperature Ranges of -58F to 239F (EPDM)
- Flashing Base is 11 x 11 - Pipe Boot Fits 3 to 7 Outside Pipe Diameter
- Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2
- If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
- 20 Year Manufacturer's Warranty Against Manufacturing Defects
- See more on Amazon...
Brand: Dektite | Manufacturer: Deks Industries Pty Ltd
Dimensions: 4.75 x 11.00 x 11.00 Inches | Weight: 14.00 ounces
See On Amazon #2
Flashers #1 Black EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 2") - 100% Made In The USA
Asin: B08HVTR22W | Model: FB1 | PartNumber: FB1
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit..
Features
- MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 3.00 x 4.75 x 4.75 Inches
See On Amazon #3
DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4" - 3")
Asin: B07FZSHC9C | Ean: 9316867050791
See Description Below For More Information.
Flashing Base Is 7" X 7" - Pipe Boot Fits 1/4" To 3" Outside Pipe Diameter.
Features
- Continuous Service Temperature Ranges of -58F to 239F (EPDM)
- Flashing Base is 7 x 7 - Pipe Boot Fits 1/4 to 3 Outside Pipe Diameter
- See Description Below for More Information
- See more on Amazon...
Brand: Dektite | Manufacturer: Dektite
See On Amazon #4
Flashers #3 Silicone Grey High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5") - 100% Made in The USA
Asin: B08HVSHXDC | Model: FSG3 | PartNumber: FSG3
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Silicone Flashers Are Rated To Service A Continuous Temperature Range Of -100 To +450 Degrees Fahrenheit..
Features
- MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
- Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit.
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 4.00 x 7.75 x 7.75 inches
See On Amazon #5
Fasteners Plus ST Fastening #3 Roofjack Square EPDM Pipe Flashing Boot (Pipe OD 1/4" to 5-3/4"), Gray
Asin: B09SGP9MB7 | Model: EPDM3S-GRY | PartNumber: EPDM3S-GRY
Easy To Use: Clearly Marked And Can Be Easily Be Cut With Shears To Fit Exactly The Pipe Size Used.
Water Diverter: Square Roofjack Can Be Turned So Corner Is Point Up The Roof.
Flexible Aluminum Base: Allows Flashing To Conform To Any Metal Roof Configuration. Pipe Location Can Be Centered In The Flat Of The Panel Or The Rib. Urethane Sealant And Self-Driving Screws Complete The Installation.
Features
- EPDM FLASHERS: Maximum resistance to ozone, UV light, and temperature range of -65 to +275 degrees Fahrenheit
- FLEXIBLE ALUMINUM BASE: Allows flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant and self-driving screws complete the installation
- EASY TO USE: Clearly marked and can be easily be cut with shears to fit exactly the pipe size used
- WATER DIVERTER: Square Roofjack can be turned so corner is point up the roof
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: ST Fastening
Weight: 3.00 pounds
See On Amazon #6
Fasteners Plus ST Fastening #8 Roofjack Square EPDM Pipe Flashing Kit (Pipe OD 6-3/4" to 13-1/2"), Gray
Asin: B07MWC9M4S | Model: EPDM8S-GRY-KIT | PartNumber: EPDM8S-GRY-KIT | Ean: 0601844810734 | UPC: 601844810734
Easy To Use: Clearly Marked And Can Be Easily Be Cut With Shears To Fit Exactly The Pipe Size Used.
Easy Installation.
Water Diverter: Square Roofjack Can Be Turned So Corner Is Point Up The Roof.
Flexible Aluminum Base: Allows Flashing To Conform To Any Metal Roof Configuration. Pipe Location Can Be Centered In The Flat Of The Panel Or The Rib. Urethane Sealant And Self-Driving Screws Complete The Installation.
Features
- EPDM Flashers: Maximum resistance to ozone, UV light, and temperature range of -65 to +250 degrees Fahrenheit
- Flexible Aluminum Base: Allows flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant and self-driving screws complete the installation
- Easy to Use: Clearly marked and can be easily be cut with shears to fit exactly the pipe size used
- Water Diverter: Square Roofjack can be turned so corner is point up the roof
- Easy Installation
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Weight: 10.10 Pounds
See On Amazon #7
2pc Bundle - Flashers #3 Black EPDM and Grey High-Temp Silicone (Pipe OD 1/4" to 5") Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing - 100% Made In The USA
Asin: B095XG6BGJ
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit. Silicone Flashers Are Rated To Service A Continuous Temperature Range Of -100 To +450 Degrees Fahrenheit..
Features
- Manufacturer Direct - 100% Made in the USA by an American Workforce
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit. Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit.
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- See more on Amazon...
Brand: Flashers
See On Amazon #8
Fasteners Plus ST Fastening #2 Roofjack Rounds EPDM Pipe Flashing Kit (Pipe OD 1-3/4" to 3"), Gray
Asin: B07MWBMDVJ | Model: EPDM2R-GRY-KIT | PartNumber: EPDM2R-GRY-KIT | Ean: 0601844810475 | UPC: 601844810475
Easy To Use: Clearly Marked And Can Be Easily Be Cut With Shears To Fit Exactly The Pipe Size Used.
Easy Installation.
5/16" Magnetic Socket Nutsetter.
Flexible Aluminum Base: Allows Flashing To Conform To Any Metal Roof Configuration. Pipe Location Can Be Centered In The Flat Of The Panel Or The Rib. Urethane Sealant And Self-Driving Screws Complete The Installation.
Features
- EPDM Flashers: Maximum resistance to ozone, UV light, and temperature range of -65 to +275 degrees Fahrenheit
- Flexible Aluminum Base: Allows flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant and self-driving screws complete the installation
- Easy to Use: Clearly marked and can be easily be cut with shears to fit exactly the pipe size used
- 5/16 Magnetic Socket Nutsetter
- Easy Installation
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Weight: 3.80 Pounds
See On Amazon #9
Fasteners Plus #4 Roofjack Rounds EPDM Pipe Flashing (Pipe OD 3" to 6-1/4"), Gray
Asin: B09SJ5K34R | Model: EPDM4R-GRY | PartNumber: EPDM4R-GRY
Easy To Use: Clearly Marked And Can Be Easily Be Cut With Shears To Fit Exactly The Pipe Size Used.
Flexible Aluminum Base: Allows Flashing To Conform To Any Metal Roof Configuration. Pipe Location Can Be Centered In The Flat Of The Panel Or The Rib. Urethane Sealant And Self-Driving Screws Complete The Installation.
Features
- EPDM Flashers: Maximum resistance to ozone, UV light, and temperature range of -65 to +275 degrees Fahrenheit
- Flexible Aluminum Base: Allows flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant and self-driving screws complete the installation
- Easy to Use: Clearly marked and can be easily be cut with shears to fit exactly the pipe size used
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: ST Fastening
Weight: 4.00 Pounds
See On Amazon
Looking For Something Else?
Search