Teyleten Robot TB6612FNG Dual DC Stepper Motor Driver Module 1.2A Peak 3.2A Better Than L298N(Pack of 3)
Asin: B08J3S6G2N | Ean: 8425553720601
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Input Voltage: 2.7 V – 10.8 V Output Current Of Single H-Bridge: 1.5A.
Can Drive Two Dc Deceleration Motors,Built In Over-Current Protection, Short-Circuit Protection, Under Voltage Locking And Over Temperature Protection,With Low Power Sleep Mode..
Size: 18 * 21Mm.
Features
- pin is black
- Size: 18 * 21mm
- Input voltage: 2.7 V 10.8 V Output current of single H-bridge: 1.5A
- can drive two DC deceleration motors,built in over-current protection, short-circuit protection, under voltage locking and over temperature protection,with low power sleep mode.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.12 x 0.83 x 0.71 inches
See On Amazon Similar To Teyleten Robot TB6612FNG Dual DC
#1
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
Asin: B00VY32VU4 | Model: COMINU039720 | PartNumber: COMINU039720 | Ean: 0743724368697, 8349396200871, 0748347529180, 7445803052208, 0717520029441, 0600346599383 | UPC: 717520029441, 600346599383, 748347529180, 743724368697
Runs At 2.7V-5V Logic. The Motor & Logic Voltage Are Separate..
Good For Motor Voltages From 4.5V Up To 13.5V.
2 Full H-Bridges Means You Can Drive 2-4 Solenoids (Only Two Can Be Active), Two Dc Motors Bi-Directionally, Or One Stepper Motor..
Features
- TB6612 motor driver with 1.2A per channel
- 2 full H-bridges means you can drive 2-4 solenoids (only two can be active), two DC motors bi-directionally, or one stepper motor.
- Runs at 2.7V-5V logic. The motor & logic voltage are separate.
- Good for motor voltages from 4.5V up to 13.5V
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 2.00 x 1.00 inches | Weight: 0.13 Pounds
See On Amazon #2
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
Asin: B07PV1S8HX | Ean: 0744790345797 | UPC: 744790345797
Standby Control To Save Power.
Assembled And Tested.
Built-In Thermal Shutdown Circuit And Low-Voltage Detecting Circuit.
Output Current: Iout = 1.2A (Average) / 3.2A (Peak).
Features
- Power supply voltage: VM = 15V max, VCC = 2.7--5.5V
- Output current: Iout = 1.2A (average) / 3.2A (peak)
- Standby control to save power
- Built-in thermal shutdown circuit and low-voltage detecting circuit
- Assembled and Tested
- See more on Amazon...
Brand: Electronics123.com, Inc. | Manufacturer: SparkFun Electronics
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #3
NOYITO Dual Motor Driver Module 1.2A Peak 3.2A TB6612FNG (Pack of 2)
Asin: B07DS2FG8K | Model: TB6612FNG | PartNumber: TB6612FNG | Ean: 0667797751098 | UPC: 667797751098
Logic Supply Voltage (Vcc) Can Be In The Range Of 2.7-5.5Vdc, While The Motor Supply (Vm) Is Limited To A Maximum Voltage Of 15Vdc. The Output Current Is Rated Up To 1.2A Per Channel (Or Up To 3.2A For A Short, Single Pulse)..
Power Supply Voltage: Vm=15V Max, Vcc=2.7-5.5V. Output Current: Iout=1.2A(Average) / 3.2A (Peak).
All Pins Of The Tb6612fng Are Broken Out To Two 0.1" Pitch Headers; The Pins Are Arranged Such That Input Pins Are On One Side And Output Pins Are On The Other..
Two Input Signals (In1 And In2) Can Be Used To Control The Motor In One Of Four Function Modes - Cw, Ccw, Short-Brake, And Stop. The Two Motor Outputs (A And B) Can Be Separately Controlled, The Speed Of Each Motor Is Controlled Via A Pwm Input Signal With A Frequency Up To 100Khz. The Stby Pin Should Be Pulled High To Take The Motor Out Of Standby Mode..
Features
- The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
- Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
- Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
- All pins of the TB6612FNG are broken out to two 0.1 pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
- Power supply voltage: VM=15V max, VCC=2.7-5.5V. Output current: Iout=1.2A(average) / 3.2A (peak)
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.20 x 0.83 x 0.71 inches | Weight: 0.02 pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #4
2 pcs TB6612FNG Dual DC Stepper Motor Driver Module, Dual Driver Controller Board H Bridge for DC Step TB6612FNG
Asin: B09MN94LVF
Simple Using: The Peripheral Circuit Is Simple And Does Not Require An External Heat Sink, Works Stably With High Working Efficiency..
Easy To Install: Comes With A Compact Size And A Light Weight, The Convenient Installation Can Be Quickly Completed Within Minutes..
Safe Working: Has Protection Against Over Current, Short Circuit, Under Voltage Lockout And Over Temperature, With Low Power Sleep Mode..
Has H Bridge: Tb6612fng Is A Mosfet Based H Bridge Integrated Circuit, Which Is Much More Efficient Than A Transistor H Bridge Driver..
Features
- Motor Driver: The dual motor driver module can be applied to DC motor and 4 wire step motor, can also be used to drive 2 DC gear motors.
- Has H Bridge: TB6612FNG is a MOSFET based H bridge integrated circuit, which is much more efficient than a transistor H bridge driver.
- Simple Using: The peripheral circuit is simple and does not require an external heat sink, works stably with high working efficiency.
- Safe Working: Has protection against over current, short circuit, under voltage lockout and over temperature, with low power sleep mode.
- Easy to Install: Comes with a compact size and a light weight, the convenient installation can be quickly completed within minutes.
- See more on Amazon...
Brand: POCREATION | Manufacturer: POCREATION
See On Amazon #5
ACEIRMC 5pcs DRV8833 Dual Motor Driver Compatible with TB6612 for Arduino Microcontroller Better Than L298N
Asin: B08ZSM5ZC1 | Ean: 0701715455313 | UPC: 701715455313
Built-In Overcurrent Protection, Short Circuit Protection, Undervoltage Lockout And Overheating Protection. With Low Power Sleep Mode..
Replaces Tb6612fng.
Uses: It Can Drive Dc Motors Below 1.5A And 4-Wire Stepper Motors..
Single H-Bridge Output Current: 1.5A, Can Drive 2 Dc Geared Motors..
Features
- Input voltage: 2.7 V 10.8 V
- Single H-bridge output current: 1.5A, can drive 2 DC geared motors.
- Built-in overcurrent protection, short circuit protection, undervoltage lockout and overheating protection. With low power sleep mode.
- Uses: It can drive DC motors below 1.5A and 4-wire stepper motors.
- Replaces TB6612FNG
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #6
ACEIRMC 2pcs IIC I2C TB6612 Mosfet Stepper Motor Module PCA9685 Servo Driver Shield Module for Arduino Robot PWM Leonardo Replace L293D
Asin: B09C24HNKG | Ean: 0701715479524 | UPC: 701715479524
Completely Stackable Design: 5 Address-Select Pins Means Up To 32 Stackable Shields.
Instead Of A L293d Darlington Driver, We Now Have The Tb6612 Mosfet Driver: With 1.2A Per Channel And 3A Peak Current Capability. It Also Has Much Lower Voltage Drops Across The Motor So You Get More Torque Out Of Your Batteries, And There Are Built-In Flyback Diodes As Well..
Characteristic: For Arduino Interface Is Fully Compatible Expansion.
H-Bridges: Tb6612 Chipset Provides 1.2A Per Bridge (3A Peak).
Features
- TB6612 Mosfet for Arduino Motor Shield Standard IIC I2C TB6612FNG Stepper Motor PCA9685 PWM Servo Driver Shield V2 Robot PWM Mega R3 Replace L293D
- H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak)
- Completely stackable design: 5 address-select pins means up to 32 stackable shields
- Characteristic: for Arduino interface is fully compatible expansion
- Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #7
Shutao 2 Pcs TB6612FNG DC Motor Drive Module 1.2A Peak 3.2A Compatible with DRV8833 Better Than L298N
Asin: B09NPLLSF2 | Model: 13-302 | PartNumber: 13-302 | Ean: 0701715510005 | UPC: 701715510005
【Safe Work】With Over-Current, Short-Circuit, Under-Voltage Lockout And Over-Heat Protection, Low-Power Sleep Mode. Input Voltage: 2.7V-10.8V Single H-Bridge Output Current: 1.5A..
【Easy To Use】 Simple Peripheral Circuit, No Need For External Heat Sink, Stable Work And High Work Efficiency..
【With H-Bridge】 Tb6612fng Is An Integrated H-Bridge Circuit Based On Mosfet, And Its Efficiency Is Much Higher Than That Of A Transistor H-Bridge Driver..
【Size】 18*21Mm. It Is Small In Size, Light In Weight, Easy To Install, And Can Be Completed Quickly Within A Few Minutes..
Features
- Motor drive The dual motor drive module can be applied to DC motors and 4-wire stepper motors, and can also be used to drive 2 DC gear motors.
- Size 18*21mm. It is small in size, light in weight, easy to install, and can be completed quickly within a few minutes.
- Safe work With over-current, short-circuit, under-voltage lockout and over-heat protection, low-power sleep mode. Input voltage: 2.7V-10.8V Single H-bridge output current: 1.5A.
- With H-bridge TB6612FNG is an integrated H-bridge circuit based on MOSFET, and its efficiency is much higher than that of a transistor H-bridge driver.
- Easy to use simple peripheral circuit, no need for external heat sink, stable work and high work efficiency.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #8
Motor Driver - Dual TB6612FNG v2
Asin: B01MF67DX6 | Model: ARFIREROB-14451L12A | PartNumber: ARFIREROB-14451L12A | Ean: 0717520029892 | UPC: 717520029892
Cw/Ccw/Short Brake/Stop Motor Control Modes.
Filtering Capacitors On Both Supply Lines.
Built-In Thermal Shutdown Circuit And Low Voltage Detecting Circuit.
Output Current: Iout=1.2A(Average) / 3.2A (Peak). Standby Control To Save Power.
Features
- Power supply voltage: VM=15V max, VCC=2.7-5.5V
- Output current: Iout=1.2A(average) / 3.2A (peak). Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- Filtering capacitors on both supply lines
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparfFun
Dimensions: 1.00 x 2.00 x 1.00 inches
See On Amazon #9
5Pcs TB6612FNG DC Motor Drive Module 1.2A Peak 3.2A Compatible with DRV8833 Better Than L298N
Asin: B0CBLTFDZ3 | Model: 13464ST-1 | PartNumber: 13464ST-1 | Ean: 0687117717337 | UPC: 687117717337
【Safe Work】With Over-Current, Short-Circuit, Under-Voltage Lockout And Over-Heat Protection, Low-Power Sleep Mode. Input Voltage: 2.7V-10.8V Single H-Bridge Output Current: 1.5A..
【Easy To Use】 Simple Peripheral Circuit, No Need For External Heat Sink, Stable Work And High Work Efficiency..
【With H-Bridge】 Tb6612fng Is An Integrated H-Bridge Circuit Based On Mosfet, And Its Efficiency Is Much Higher Than That Of A Transistor H-Bridge Driver..
【Size】 18*21Mm. It Is Small In Size, Light In Weight, Easy To Install, And Can Be Completed Quickly Within A Few Minutes..
Features
- Motor drive The dual motor drive module can be applied to DC motors and 4-wire stepper motors, and can also be used to drive 2 DC gear motors.
- Size 18*21mm. It is small in size, light in weight, easy to install, and can be completed quickly within a few minutes.
- Safe work With over-current, short-circuit, under-voltage lockout and over-heat protection, low-power sleep mode. Input voltage: 2.7V-10.8V Single H-bridge output current: 1.5A.
- With H-bridge TB6612FNG is an integrated H-bridge circuit based on MOSFET, and its efficiency is much higher than that of a transistor H-bridge driver.
- Easy to use simple peripheral circuit, no need for external heat sink, stable work and high work efficiency.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon
Looking For Something Else?
Search