ElecGear 2 x Replacement Battery for Joy-Con Switch Controller, HAC-006 Internal Rechargeable Li-ion Battery for Nintendo Joycon Controller Left and Right with Repair Tool Kit
Asin: B08KNWRBR8 | Model: HAC-006 | PartNumber: HAC-006 | Ean: 0738634051975 | UPC: 738634051975
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Diy Reminder] - Disassemble The Controller With A Y-Tip Screwdriver And An Opening Lever Tool. Replace The New Battery With The Problem One. Make Sure The New Battery Is Working Before Screwing On The Back Cover. Note: The Included Phillips Screwdriver Is Not Intended For This Operation. We Packed It Because You Might Need It One Day To Disassemble The Game Console.).
[Package Content] - 2 X ✅Hac-006 Replacement Battery For Joy-Con Controller; 1 X Y00 Three-Wing Screwdriver; 1 X Ph000 Phillips Screwdriver; 1 X Plastic Opening Lever.
[When To Replace] - The Internal Battery Needs To Be Replaced When The Charging Process Has Completed In Fewer Hours Than Before, Or The Playing Hours Gradually Shorten Even If Fully Charged. (Please Note: Replacing The Battery Will Not Solve The Problem That Does Not Charge, Turn On Or Depletes Power When Not Used.).
Features
- [Joy Con HAC-006 Battery] - 2 packs of OEM replacement Li-ion batteries are for Nintendo Switch Joy-Con controllers. Model: HAC-006, 3.7 V, 525 mAh, 1.9 Wh. Suitable for left and right Joycon controllers: HAC-015 HAC-A-JCL-Cx and HAC-016 HAC-A-JCR-Cx. Interchangeable with part number: HAC-A-BPJPA-C0, HAC-A-BPJMX-C0, HAC-A-BPJMX-C1 and more. Repair tool kit included
- [WHEN TO REPLACE] - The internal battery needs to be replaced when the charging process has completed in fewer hours than before, or the playing hours gradually shorten even if fully charged. (Please note: replacing the battery will not solve the problem that does not charge, turn on or depletes power when not used.)
- [DIY Reminder] - Disassemble the controller with a Y-tip screwdriver and an opening lever tool. Replace the new battery with the problem one. Make sure the new battery is working before screwing on the back cover. Note: The included Phillips screwdriver is not intended for this operation. We packed it because you might need it one day to disassemble the game console.)
- [Package Content] - 2 x HAC-006 Replacement Battery for Joy-Con Controller; 1 x Y00 Three-Wing Screwdriver; 1 x PH000 Phillips Screwdriver; 1 x Plastic Opening Lever
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Weight: 0.03 pounds
See On Amazon Similar To ElecGear 2 x Replacement Battery
#1
ElecGear Replacement Internal Cooling Fan compatible with Nintendo Switch - CPU Heatsink Cooler, Thermal Compound Paste, Y00 Triwing and PH00 Phillips Screwdriver, Spudger, Wipes Repair Tool Kit
Asin: B07VFQ2KG8 | Model: NS-Fan | PartNumber: NS-Fan | Ean: 0797550074482 | UPC: 797550074482
[Thermal Paste And Tool Kit] – Specially Customized Thermal Compound Is The Ideal Cpu Heatsink Grease With High Thermal Conductivity (6.5W/M-K), Low Thermal Resistance, Metal-Free, Non-Bleeding And Easy To Apply. Y-Tipped Y00 Tri-Wing, Ph000 Phillips Screwdriver And Plastic Opening Tool For Easy Teardown And Assembly. The Disposable Pre-Moistened Wipes Makes Quick And Easy Removal Of The Old Thermal Paste.
[What’S In Package] – 1X Replacement Internal Cpu Cooling Fan; 1X Thermal Paste Tube; 1X Eva Sheet; 3X Silicone O-Ring Pads; 1X Y00 Tri-Wing Screwdriver; 1X Ph000 Cross Screwdriver; 1X Plastic Opening Pry Tool; 1X Wet And Dry Wipes. Installation Demonstration Offered On Elecgear Tech Support Site.
[Elecgear Vs. Nintendo] – 🔴Newly Designed Cooling Fan At Max 8800Rpm (100% Duty) Which Is 10% Faster Than Nintendo Original. 🟠Each Piece Of Fans Is Tested At Fine Dynamic Balance That Is Why You Might See The Red Balancing Mud On The Rotor. 🟡Refined 3X Shockproof O-Ring Feet. 🟢Additional Noise Absorbing Eva Sheet Covers The Entire Metal Plate And Makes Sure 2Db Decrease Of Noise Level. We Deliberately Leave You With The Pasting Operation For Diy Fun.
Features
- [Switch CPU Fan] The replacement cooling fan is compatible with Nintendo Switch video games console. Fits Switch HAC-001 and the battery improved model HAC-001(-01). Not compatible with Switch Lite HDH-001 or 2021 OLED. Brand-new and tested in perfect working condition. Well wrapped in ESD protective bag and all the necessary repair tools included. Please study what we have done on improving the fan system below
- [ElecGear vs. Nintendo] Newly designed cooling fan at max 8800RPM (100% Duty) which is 10% faster than Nintendo original. Each piece of fans is tested at fine dynamic balance that is why you might see the red balancing mud on the rotor. Refined 3x shockproof O-ring feet. Additional noise absorbing EVA sheet covers the entire metal plate and makes sure 2dB decrease of noise level. We deliberately leave you with the pasting operation for DIY fun
- [Thermal Paste and Tool Kit] Specially customized thermal compound is the ideal CPU heatsink grease with high thermal conductivity (6.5w/m-k), low thermal resistance, metal-free, non-bleeding and easy to apply. Y-tipped Y00 tri-wing, PH000 Phillips screwdriver and plastic opening tool for easy teardown and assembly. The disposable pre-moistened wipes makes quick and easy removal of the old thermal paste
- [What s in Package] 1x Replacement Internal CPU Cooling fan; 1x Thermal Paste Tube; 1x EVA sheet; 3x Silicone O-ring Pads; 1x Y00 Tri-wing Screwdriver; 1x PH000 Cross Screwdriver; 1x Plastic Opening Pry Tool; 1x Wet and Dry Wipes. Installation demonstration offered on ElecGear tech support site
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Weight: 0.29 pounds
See On Amazon #2
IKPEK 20pcs 2K3 Ohm Potentiometer Replacement for Dualsense PS5 Controller, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick
Asin: B0BWRNWJDC
Install -- This Product Will Require Moderate Soldering To Install..
Customer Service & Warranty -- We Provide 3 Months Warranty For Replacement Potentiometer. If You Have Any Problem About The Product, Please Feel Free To Contact Us, We Will Reply You With 24 Hours..
Package Included -- 20 X 2K3 Ohm Potentiometer, 1 X Cross Screwdriver, 1 X Tweezer, 1 X Pry Tools, 1 X Pry Bar..
Solve Most Joystick Problem -- Stick Drift, Stuttering, Dead Zones, Creeping, Blind Spots, Non Centered..
Features
- Compatibility -- 2K3 Ohm Potentiometer Compatible with PS5 Controller Only (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
- Solve Most Joystick Problem -- Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
- INSTALL -- This product will require moderate soldering to install.
- Package Included -- 20 x 2K3 Ohm Potentiometer, 1 x Cross Screwdriver, 1 x Tweezer, 1 x Pry tools, 1 x Pry bar.
- Customer Service & Warranty -- We provide 3 months warranty for replacement Potentiometer. If you have any problem about the product, please feel free to contact us, we will reply you with 24 hours.
- See more on Amazon...
Brand: IKPEK | Manufacturer: IKPEK
Weight: 0.07 pounds
See On Amazon #3
ElecGear 2X Hall Joystick Replacement for Switch Joy-Con, Electromagnetic Effect Sensor No-Drifting Thumbstick for Left and Right Joy Con Controller, Repair Tool and Power Saving Module Included
Asin: B0BXHMDN6Q
[All The Necessary Tools Included] – No Soldering Needed. Teardown Your Joy-Cons With The Tri-Wing (Y-Tipped), Cross Screwdriver And Plastic Pry Tool. Install The New Stick Unit And The Module. Remember To Calibrate The New Control Sticks In Settings.
[What’S In Box] – 2X Hall Joysticks (Works With Joy-Con And Switch Lite), 2X Additional Power Saving Adapter (For Joy-Con Alone), 1X Y00 Screwdriver, 1X Ph000 Screwdriver, 1X Plastic Opening Tool, 1X Tweezers. (🔺No Instruction Included, Please Search The Video Online.).
[Additional Power Saving Adapter] – To Further Reduce The Power Consumption And Prolong Battery Life, We Designed A Control Pcb For Better Power Management. The Hall Stick Unit Consumes Less Power When Playing And It Takes No Power When Your Joy Con Is In Sleeping Mode. (🔺Switch Lite Does Not Need This Adapter.).
Features
- [Hall Effect Joystick for Joy Con] Electromagnetic edition of joystick replacement for Nintendo Switch Joy-con controllers. Features high sensitivity hall sensors inside. More accurate, long durable and consumes less power. No wear on traditional carbon film resistor, say goodbye to drifting. (The Hall Stick also works with Switch Lite.)
- [Additional Power Saving Adapter] To further reduce the power consumption and prolong battery life, we designed a control PCB for better power management. The hall stick unit consumes less power when playing and it takes no power when your Joy Con is in sleeping mode. ( Switch Lite does not need this adapter.)
- [All the necessary tools included] No soldering needed. Teardown your Joy-Cons with the tri-wing (Y-tipped), cross screwdriver and plastic pry tool. Install the new stick unit and the module. Remember to calibrate the new control sticks in settings
- [What s in Box] 2x Hall joysticks (Works with Joy-Con and Switch Lite), 2x Additional Power Saving Adapter (for Joy-Con alone), 1x Y00 Screwdriver, 1x PH000 Screwdriver, 1x Plastic Opening Tool, 1x Tweezers. ( No instruction included, please search the video online.)
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Warranty: 30 Days of FBA service
See On Amazon
Looking For Something Else?
Search