5 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module
Asin: B08NV3JCBC | Model: LM2596 | PartNumber: LM2596 | Ean: 0701715453975 | UPC: 701715453975
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Steps: Connect To Power Source, Adjust The Swirl Button On The Blue Potentiometer And Monitor Voltage With Multimeter To Get The Needed Voltage (The Factory Have Tested These At Max Voltage So They Are Very High By Default, Takes About 15-20 Turns Ccw Before The Voltage Starts Ramping Down).
Quantity: 5 Pieces; Size: 45 * 20 * 14 Mm.
Features: All Use Sanyo Solid-State Capacitors, 36 U Thickening Circuit Boards, High-Q Inductance With Led Indicator Output.
Output: Dc 1.5 V To 35 V Voltage Is Continuously Adjustable, Maximum Output Current Is 3 A.
Features
- Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
- Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A
- Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)
- Features: all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output
- Quantity: 5 pieces; Size: 45 * 20 * 14 mm
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
See On Amazon Similar To 5 Pack LM2596 DC to
#1
DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case
Asin: B07JZ2GQJF | Model: 180080AFA | PartNumber: 180080AFA
Display --- Large Clear Digital Lcd Display Voltage & Current Value Simultaneously..
Note --- 1). Output Voltage Is Set As Around 20V By Default, If Your Input Is Lower Than That, Please Turn Potentiometer Anticlockwise For 10 Laps Or More Until Voltage Changes. 2). The Case Is Packaged Unassembled To Avoid Damage During Transit. It Needs To Be Manually Installed. 3). Please Carefully Read The User’S Manual, Especially The “Cautions” Before Using. You Can Find The Pdf Instructions On This Page -- Product Information -- Product Guides And Documents -- User Manual [Pdf]..
Features --- Constant Current/Voltage Mode; Voltage Calibration & Current Calibration; Usb Interface; Protective Case; Short-Circuit Protection; Over-Temperature Protection; Input Reverse Connection Protection..
General Use --- As Ordinary Step-Down Module With Over-Current Protection; As Constant Current Led Driver Module; Diy A Solar Power Controller, Etc..
Features
- PARAMETER --- Input voltage range DC 6V-32V; Output voltage DC 1.5V-32V; Max output current 5A, recommend use of within 4.5A; Max output power 75W, recommend use of within 50W.
- GENERAL USE --- As ordinary step-down module with over-current protection; As constant current LED driver module; DIY a solar power controller, etc.
- DISPLAY --- Large clear digital LCD display voltage & current value simultaneously.
- FEATURES --- Constant current/voltage mode; Voltage calibration & current calibration; USB interface; Protective case; Short-circuit protection; Over-temperature protection; Input reverse connection protection.
- NOTE --- 1). Output voltage is set as around 20V by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. 2). The case is packaged unassembled to avoid damage during transit. It needs to be manually installed. 3). Please carefully read the user s manual, especially the Cautions before using. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF].
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Dimensions: 0.98 x 1.57 x 2.58 Inches | Weight: 0.15 Pounds
See On Amazon #2
DROK Waterproof DC Buck Converter Voltage Regulator 8-22V to 3-15V 5V 12V 3A Adjustable Output Power Supply Transformer Step-Down Volt Module Board for Car Auto Vehicle Motor Regulated SR
Asin: B00C0KL1OM | Model: 090010 | PartNumber: 090010 | Ean: 0619397027004 | UPC: 619397027004
Fully Sealed, Outer Enclosure Acts As A Heat Sink, Specially Made To Be Waterproof, Anti-Shock, Anti-Humidity And Dust-Proof, More Durable..
Perfect For Electronic Hobby Project, Wide Application, You Can Use It On Radio, Car Audio, Led Display, Motor, Cell Phone, Etc..
With Reversed-Connection Protection, Over-Current Protection, Over-Heating Protection And Over-Voltage Protection, Hence Is Safe To Use..
With Potentiometer On The Bottom, Which Allows You Adjust The Accuracy With The Mini Screw, But Ensures You Won't Easily Change Its Setting When Mounted..
Features
- Uses synchronous rectification technology, has high conversion efficiency and stable performance; The input should be at least 3V higher than output.
- With potentiometer on the bottom, which allows you adjust the accuracy with the mini screw, but ensures you won't easily change its setting when mounted.
- Fully sealed, outer enclosure acts as a heat sink, specially made to be waterproof, anti-shock, anti-humidity and dust-proof, more durable.
- With reversed-connection protection, over-current protection, over-heating protection and over-voltage protection, hence is safe to use.
- Perfect for electronic hobby project, wide application, you can use it on radio, Car Audio, LED display, motor, cell phone, etc.
- See more on Amazon...
First Available: 05/26/2021
Brand: DROK | Manufacturer: DROK
Dimensions: 0.79 x 1.30 x 0.98 inches | Weight: 0.00 pounds
Warranty: 1 year
See On Amazon #3
DROK 12v to 5v Volt Converter, DC 8-35V to 5V 3A 15W Voltage Regulator Board Power Supply Module, 9V 12V 24V Waterproof Car Volt Step Down Buck Converter
Asin: B07P663XJV | Model: 090600AFA | PartNumber: 090600AFA | Ean: 0682516778958 | UPC: 682516778958
Protection --- Over-Current Protection; Over-Temp Protection; Input Reverse Connection Protection; Short-Circuit Protection; Waterproof; Dust-Proof; Moisture-Proof; Shock-Proof..
Feature --- High Conversion Efficiency, Low Heat Generation; Aluminum Case, Good Heat Dissipation, High Safety..
Conversion Efficiency --- Over 95% Max..
Application --- 12V To 5V Step Down Converter. Can Be Used For Car Audio, Led Display; Motor, Speaker; Auto Map Navigator; Hard Disk Player; Media; Electric Fan; Toy Cars; Air Conditioning; Solar Energy, Etc..
Features
- PARAMETER --- input voltage DC 8V-35V (12V 9V); output voltage DC 5V; output current 3A; output power 15W.
- APPLICATION --- 12v to 5v step down converter. Can be used for car audio, LED display; motor, speaker; auto map navigator; hard disk player; media; electric fan; toy cars; air conditioning; solar energy, etc.
- PROTECTION --- over-current protection; over-temp protection; input reverse connection protection; short-circuit protection; waterproof; dust-proof; moisture-proof; shock-proof.
- CONVERSION EFFICIENCY --- over 95% max.
- FEATURE --- high conversion efficiency, low heat generation; aluminum case, good heat dissipation, high safety.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.00 pounds
See On Amazon #4
DROK DC Buck Converter, 5.3V-32V to 1.2V-32V 12A Adjustable Power Supply, 5v 9v 12v 24V 30V 32V Step Down Voltage Regulator with LCD Display Volt Transformer Reducer CC CV for RV Solar Panel Golf Cart
Asin: B078Q1624B | Model: REES-1822 | PartNumber: REES-1822 | Ean: 0678535742056 | UPC: 678535742056
【Easy Operation】 A User Manual Will Be Included In Package, Which Can Help You Easier To Operate. The Button Can Control Ouput Voltage On/Off Status, And You Can Set The Default Output State Is On/Off For The Next Time. The Potentiometer Can Help You To Adjust Volt Amp In A Simple And Fast Way..
【Application】 The Volt Conversion Board Can Be Used For 5V 6V 9V 12V 24V 30V 32V 3A 5A 10A Devices, Like Solar Panel, Lab, Experiment, Rv, All-Terrain Vehicle, Car, Battery Charger, Led Stripes, Etc..
【Protection】 It Has Reverse-Connect Protection, Short Circuit Protection And Over Current Protection. When You Connect The Input Wire Reversely Or Short Circuit, The Module Will Not Burn. And Roate The Cc Potentiometer To Set Over Current Protection Value You Want..
【Characteristics】 This Buck Converter Is Equipped With Lcd Display, Acrylic Case And Heat Sink. Lcd Screen Can Display Input/Output Voltage, Output Current And Output Power. Voltage Precision Is 0.05V, Current Precision Is 0.005A. Acrylic Case Can Keep The Converter Board Away From Dust, Which Is Protective. Heat Sink Can Keep Module 120W For Long-Time Using In A Low Temperature. If You Want To Reach Maximum Power 160W, Please Improve Heat Dissipation..
Features
- Parameter DROK Power Supply Module input volt range is DC 5.3-32V; Output volt range is DC 1.2-32V which is variable. Output current can reach to 8A and Output Power can reach to 120W for long-time use. If enhance heat dissipation, this converter can reach 12A and 160W output.
- Characteristics This Buck Converter is equipped with LCD Display, Acrylic Case and Heat Sink. LCD Screen can display input/output voltage, output current and output power. Voltage precision is 0.05V, current precision is 0.005A. Acrylic case can keep the converter board away from dust, which is protective. Heat Sink can keep module 120W for long-time using in a low temperature. If you want to reach maximum power 160W, please improve heat dissipation.
- Easy Operation A user manual will be included in package, which can help you easier to operate. The button can control ouput voltage ON/OFF status, and you can set the default output state is ON/OFF for the next time. The potentiometer can help you to adjust volt amp in a simple and fast way.
- Protection It has reverse-connect protection, short circuit protection and over current protection. When you connect the input wire reversely or short circuit, the module will not burn. And roate the CC potentiometer to set over current protection value you want.
- Application The volt conversion board can be used for 5v 6v 9v 12v 24V 30V 32V 3a 5a 10a devices, like solar panel, lab, experiment, RV, All-Terrain Vehicle, car, battery charger, LED stripes, etc.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Dimensions: 1.25 x 2.04 x 3.22 inches
See On Amazon #5
Wolfwhoop PW-D Control Buck Converter 6-24V to 5V 1.5A Step-Down Regulator Module Power Inverter Volt Stabilizer
Asin: B076P4C42B | Model: 5824093032 | PartNumber: 5824093032
It With A Super Mini Size: 17Mm * 5.5Mm.
This Voltage Step Down Module Is Designed For 2-6S Battery.
It Can Power For Transmitter And Receiver Or Mini Camera.
Voltage Buck: 6-24V In, 5V Out..
Features
- 4pcs PW-D
- Voltage buck: 6-24V in, 5V out.
- It with a super mini size: 17mm * 5.5mm
- It can power for transmitter and receiver or mini camera
- This voltage step down module is designed for 2-6S Battery
- See more on Amazon...
Brand: Wolfwhoop | Manufacturer: Wolfwhoop
Weight: 0.02 pounds
See On Amazon #6
HiLetgo 2pcs LM2596 Adjustable DC-DC Step Down Buck Power Convert Module 4.0-40V Input to 1.25-37V Output with LED Voltmeter Display
Asin: B00LSEBYHU | Model: 3-01-0167 | PartNumber: 3-01-0167 | Ean: 0702082654835 | UPC: 702082654835
Output Voltage Range Of 1.25V ~ 37V.
4.0-40V To 1.25-37V Led Voltmeter.
Features
- LM2596 DC-DC Buck Step-down Power Converter Module
- 4.0-40V to 1.25-37V LED Voltmeter
- output voltage range of 1.25V ~ 37V
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
5V Regulator 5pcs Mini Reducer DC 5-30V 12V 24V Buck to 5V Buck Converter Board 1.8A Output Mini360 Small Size Aircraft Model MP1584EN Power Module(Black 5V)
Asin: B0B779ZYN1 | Model: ASDS-ZH108 | PartNumber: ASDS-ZH108
Output Ripple: Less Than 30 Mv; Switching Frequency: 1.5 Mhz (Highest), Typically 1 Mhz.
Package: 5Pcs 5V Buck Module.
When Using This Module With An Inductive Load, Please Pay Attention To The Protection Of The Current In The Rear Stage. For Example, When Using A Steering Gear Or A Motor, A Large Ripple May Be Generated, Which May Affect The Chips In The Rear Stage Circuit. You Can Add Zener And Capacitor For Protection.
The Maximum Output Current Can Reach 1.8A, When The Output Current Is 1.5A, The Output Voltage Is 4.6V.
Features
- Very small size, length, width and height are 17.5*12.3*4.3mm,Input: 5V-28V,Output: 5V
- The maximum output current can reach 1.8A, when the output current is 1.5A, the output voltage is 4.6V
- Output ripple: less than 30 mV; Switching frequency: 1.5 MHz (highest), typically 1 MHz
- When using this module with an inductive load, please pay attention to the protection of the current in the rear stage. For example, when using a steering gear or a motor, a large ripple may be generated, which may affect the chips in the rear stage circuit. You can add Zener and capacitor for protection
- Package: 5PCS 5V Buck Module
- See more on Amazon...
Brand: Generic | Manufacturer: Esedese
See On Amazon #8
UCTRONICS DC 9V 12V 24V to DC 5V 5A Buck Converter Module, 9-36V Step Down to USB 5V Transformer Dual Output Voltage Regulator Board [2 Pack]
Asin: B07XXWQ49N | Model: U6223 | PartNumber: U6223
High-Efficient Transformation: The Module Adopts The New Technology Synchronous Rectification, Which Improves Conversion Efficiency Obviously And Expands The Working Voltage And Current..
Application: As A Usb 5V Buck Converter, Diy A Phone Charger, Refit Car Charger, Supply Power To Raspberry Pi 4 B..
Mini And Portable: 63 X 2 X 10Mm, Suitable For Various Narrow Installation Space And Small Case..
Input Port: 5.5Mm×2.1Mm Dc Socket And Wiring Terminal, Each Way Makes The Module Work; Output Port: Usb And Wiring Terminal, Can Output Power At The Same Time..
Features
- Power Supply: DC 9-36V; Output Voltage: 5-5.3V; Output Power: 18W to 30W (input DC 9-24V, output 5.2V/6A; input DC 24-32V, output 5.2V/5A; input DC 32-36V, output 5.2V/3.5A)
- Input Port: 5.5mm 2.1mm DC socket and wiring terminal, each way makes the module work; Output Port: USB and wiring terminal, can output power at the same time.
- High-efficient Transformation: the module adopts the new technology synchronous rectification, which improves conversion efficiency obviously and expands the working voltage and current.
- Mini and Portable: 63 x 2 x 10mm, suitable for various narrow installation space and small case.
- Application: as a USB 5V buck converter, DIY a phone charger, refit car charger, supply power to raspberry pi 4 b.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.10 pounds
See On Amazon #9
DROK DC Buck Converter, 6-55V to 0-50V 8A 400W 6V 12V 24V 36V 48V Constant Voltage and Constant Current Buck Module, DC Regulated Power Supply, Stepdown Adjustable Voltage Regulator
Asin: B098347BD9
Protection --- Hardware Protection: Input Anti Reverse-Connect Protection And Output Short Circuit Protection. Software Protection: Over Voltage Protection(Ovp), Over Current Protection(Ocp), Over Power Protection(Opp), Over Temperature Protection(Otp), Input Low Voltage Protection(Lvp)..
Lcd Display --- The Module Status Reader Is Designed With Lcd Screen, Clear And Convenient..
Oah/Oph/Ohp Function --- When The Recorded Capacity/Energy/Operation Time Is Higher Than The Setting Maximum Capacity/Energy/Time, The Power Supply Will Automatically Turn Off Output, And "Oah"/"Oph"/"Ohp" Will Flash On The Screen..
Intelligent Cooling Fan --- When Temperature Is Over 50℃ Or Current Is Over 2A, The Fan Will Be Activated Automatically..
Features
- Adjustable Voltage & Current --- Input Voltage is 6.0-55V; Output Voltage is 0.0-50V; Output Current is 0.000A-8.100A; Output Power is 0-400W; can be arbitrary adjusted.
- Intelligent Cooling Fan --- when temperature is over 50 or current is over 2A, the fan will be activated automatically.
- Protection --- Hardware Protection: input anti reverse-connect protection and output short circuit protection. Software Protection: over voltage protection(OVP), over current protection(OCP), over power protection(OPP), over temperature protection(OTP), input low voltage protection(LVP).
- OAH/OPH/OHP Function --- when the recorded capacity/energy/operation time is higher than the setting maximum capacity/energy/time, the power supply will automatically turn off output, and OAH/OPH/OHP will flash on the screen.
- LCD Display --- the module status reader is designed with LCD screen, clear and convenient.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.29 pounds
See On Amazon #10
DC 12v 24v to 5v Step Down Converter Regulator 5A 25W Power Adapter Reducer for Car Electronics Truck Vehicle Boat Solar System (Accept DC 8-40V Inputs)
Asin: B07Q5W1BG3 | Model: 8-40T5-5A | PartNumber: 8-40T5-5A | Ean: 8431275307839
Built-In Over-Voltage, Under-Voltage, Overload, Over-Heat And Short Circuit Protection.
High Quality And Performance. 3 Year Warranty. Notice: If Your Device's Load Is Close To The Max Power, Please Select A Higher Power Converter, As It Can Not Be Used For Long Time By The Max Power..
The Length Of The Line Is About 12Cm, Slim, Small Volume, Easy Installation..
Waterproof Housing Makes The Converter Ideal For Use In A Wide Range Of Applications Including Vehicles, Phone Charging, Electronics, Hospital Equipment, Telecommunications, Lab Etc..
Features
- DC 12V 24V 36V to DC 5V Step Down Converter. Input voltage range: 8V-40V. Output voltage: 5V. Max Current 5A 25W. Working Current:3.5A.
- Waterproof housing makes the converter ideal for use in a wide range of applications including vehicles, phone charging, electronics, hospital equipment, telecommunications, Lab etc.
- Built-in over-voltage, under-voltage, overload, over-heat and short circuit protection
- The length of the line is about 12CM, slim, small volume, easy installation.
- High quality and performance. 3 Year Warranty. NOTICE: If your device's load is close to the MAX POWER, please select a higher power converter, as it can not be used for long time by the MAX POWER.
- See more on Amazon...
Brand: EKYLIN | Manufacturer: EKYLIN
See On Amazon #11
5Pack LM2596 LM2596S DC-DC Step Down Variable Volt Regulator Input 3.0-40V Output 1.5-35V Adjustable Buck Converter Electronic Voltage Stabilizer Power Supply Module
Asin: B07PDGG84B | Model: NA | PartNumber: NA | Ean: 0682228946256 | UPC: 682228946256
★Easy Work: Convenient To Accurately Adjust The Output Voltage With A Mini Screwdriver..
★Application: Widely Used For Diy Mobile Power, Monitor Power Supply, Power Buggies,Communications Equipment Supply,Etc..
★Features: Thickened Circuit Boards,Short Circuit And Over-Temperature Protection..
★Output: Dc 1.5-35 V Voltage Is Continuously Adjustable, Maximum Output Current Is 3 A..
Features
- Input DC 3-40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
- Output: DC 1.5-35 V voltage is continuously adjustable, maximum output current is 3 A.
- Easy work: convenient to accurately adjust the output voltage with a mini screwdriver.
- Features: Thickened circuit boards,Short circuit and over-temperature protection.
- Application: widely used for DIY mobile power, monitor power supply, power buggies,communications equipment supply,etc.
- See more on Amazon...
First Available: 02/20/2023
Brand: Generic | Manufacturer: Does Not Apply
Warranty: 1 year
See On Amazon #12
4 Pieces Adjustable LM2596S DC-DC Buck Converter Reduced Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display
Asin: B081N6WWJS | Model: Frienda-Power Converters-01 | PartNumber: Frienda-Power Converters-01
Easy To Use: With Terminal Block, No Soldering Iron Is Also Convenient To Use, And Retain The Wire Bond Point (The Input Voltage Must Be Higher Than The Voltage To Be Output By 1V Or More).
Nice Design: With 150Khz Internal Oscillation Frequency, Features Low Power Consumption And High Efficiency; When The Output Voltage Cannot Be Adjusted And Is Always Equal To The Input Voltage, Please Turn The Potentiometer Counterclockwise For More Than 10 Turns, And Then Use The Module To Adjust The Voltage Normally; This Is Because When The Module Leaves The Factory, The Default Output Voltage Is About 20V.
Output Current: The Maximum Output Current Can Be As High As 3A, The Recommended Working Current Is About 2A, More Than 2A Plus Heat Sink.
Simple To Operate: The Voltmeter Can Be Turned Off, And The Switch Can Be Turned Off By Pressing And Holding The Switch For More Than 1 Second And Less Than 4 Seconds, Once The Voltmeter Is Turned Off, Simply Press The Switch To Turn On The Voltmeter.
Features
- Product parameters: input voltage is 4.0V - 40V, output voltage is 1.25V - 37V, output current is 2A (normal and stable) and 3A max, conversion efficiency 92% (highest), output ripple under 30mV, switching frequency 150KHz, operating temperature is -45 to 85 degree Celsius
- Simple to operate: the voltmeter can be turned off, and the switch can be turned off by pressing and holding the switch for more than 1 second and less than 4 seconds, once the voltmeter is turned off, simply press the switch to turn on the voltmeter
- Easy to use: with terminal block, no soldering iron is also convenient to use, and retain the wire bond point (the input voltage must be higher than the voltage to be output by 1v or more)
- Output current: the maximum output current can be as high as 3A, the recommended working current is about 2A, more than 2A plus heat sink
- Nice design: with 150KHz internal oscillation frequency, features low power consumption and high efficiency; When the output voltage cannot be adjusted and is always equal to the input voltage, please turn the potentiometer counterclockwise for more than 10 turns, and then use the module to adjust the voltage normally; This is because when the module leaves the factory, the default output voltage is about 20V
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Weight: 0.20 pounds
See On Amazon #13
BULVACK 10 Pack LM2596 DC-DC Buck Converter Step Down Module Power Supply DIP Output 1.25V-30V 3A
Asin: B07VVXF7YX | Model: ZT001 | PartNumber: ZT001 | Ean: 0745672639546 | UPC: 745672639546
All Solid Capacitors Using Sanyo.
High-Q Inductors With High Power Output Led Indicator.
36U Thick Circuit Boards.
Output: 1.25V To 30V Dc Voltage Is Continuously Adjustable, High Efficiency And Maximum Output Current Of 3A..
Features
- Input voltage range: DC 3.2V to 35V (input voltage must be higher than the voltage output to 1.5V or more can not be boosted.)
- Output: 1.25V to 30V DC voltage is continuously adjustable, high efficiency and maximum output current of 3A.
- All solid capacitors using SANYO
- 36u thick circuit boards
- High-Q inductors with high power output LED indicator
- See more on Amazon...
First Available: 07/27/2020
Brand: BULVACK | Manufacturer: Zixtec
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.29 Pounds
Warranty: No
See On Amazon #14
Valefod 6 Pack LM2596 DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step-Down Module
Asin: B076H3XHXP | Model: VA-HW-411 | PartNumber: VA-HW-411 | Ean: 0889328049201 | UPC: 889328049201
【Output Voltage】Dc 1.25V To 30V Voltage Is Continuously Adjustable, Maximum Output Current Is 3A..
【Easy To Diy】Connect To Power Source, Using A Mini Screwdriver To Increase Or Decrease Output Voltage By Adjusting The Screw On The Blue Potentiometer And Monitor Voltage With Multimeter To Get The Needed Voltage, Clockwise To Step Up Voltage And Counterclockwise To Step-Down Voltage. (Factory Default Stays A High Voltage, You Need To Contrarotate About 7-15 Circles Before The Voltage Starts Ramping Down, 1 Circle Means +/- 1V).
【Mini Size】45 * 23 * 14 Mm (With Potentiometer). 6Pcs Included..
【Input Voltage】Dc 3.2V To 35V (Input Voltage Must Be 1.5V Higher Than The Output Voltage, No Boost)..
Features
- High Precision The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- Input Voltage DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost).
- Output Voltage DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A.
- Mini Size 45 * 23 * 14 mm (with potentiometer). 6pcs included.
- Easy to DIY Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
Dimensions: 0.55 x 0.90 x 1.77 Inches | Weight: 0.03 pounds
See On Amazon #15
[2 Pack] DC-DC 5A Buck Converter 4-38V to 1.25-36V Step-Down Voltage Regulator High Power Module with LED Display
Asin: B085T73CSD | Model: VA-0189 | PartNumber: VA-0189 | Ean: 0722453988321 | UPC: 722453988321
【Output Voltage】Dc 1.25V To 36V Voltage Is Continuously Adjustable, Maximum Output Current Is 5A..
【Easy To Diy】Connect To Power Source, Using A Mini Screwdriver To Increase Or Decrease Output Voltage By Adjusting The Screw On The Blue Potentiometer And Monitor Voltage With Multimeter To Get The Needed Voltage, Clockwise To Step Up Voltage And Counterclockwise To Step-Down Voltage. (Factory Default Stays A High Voltage, You Need To Contrarotate About 7-15 Circles Before The Voltage Starts Ramping Down, 1 Circle Means +/- 1V).
【Mini Size】62*38*14 Mm (With Potentiometer). 2 Sets Included..
【Input Voltage】Dc 4V To 38V (Input Voltage Must Be 1.5V Higher Than The Output Voltage, No Boost)..
Features
- High Precision The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- Input Voltage DC 4V to 38V (input voltage must be 1.5V higher than the output voltage, no boost).
- Output Voltage DC 1.25V to 36V voltage is continuously adjustable, maximum output current is 5A.
- Mini Size 62*38*14 mm (with potentiometer). 2 sets included.
- Easy to DIY Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
Weight: 0.07 pounds
See On Amazon #16
DROK Buck Converter 12v to 5v, 5A USB Voltage Regulator DC 9V-36V Step Down to DC 5V-5.3V 5.2V 3.5-6A Volt Transformer Power Supply Module for Phone Fast Charging
Asin: B01NALDSJ0 | Model: 200217 | PartNumber: 200217
Our Buck Voltage Regulator Is User-Friendly, Accompany With Dc Interface And Connecting Terminals, Make It Easier To Be Connected To Different Devices..
Note: Input Different Voltage Will Output Different Power: Input Dc 9-24V, Output 5.2V/6A/30W; Input Dc 24-32V, Output 5.2V/5A/25W; Input Dc 32-36V, Output 5.2V/3.5A/18W..
The Voltage Reducer Is With Usb Interface And Quick Charge Identifying Chip, And Is Compatible With Android And Apple..
The Step Down Regulator Adopts Synchronous Rectification Scheme To Provide Wide Voltage Range, Large Current And High Efficiency..
Features
- DROK buck converter input voltage is DC 9v-36v, output voltage is 5.2V (5V-5.3V available according to your input voltage).
- The step down regulator adopts synchronous rectification scheme to provide wide voltage range, large current and high efficiency.
- Our buck voltage regulator is user-friendly, accompany with DC interface and connecting terminals, make it easier to be connected to different devices.
- The voltage reducer is with USB interface and quick charge identifying chip, and is compatible with Android and Apple.
- Note: Input different voltage will output different power: input DC 9-24V, output 5.2V/6A/30W; input DC 24-32V, output 5.2V/5A/25W; input DC 32-36V, output 5.2V/3.5A/18W.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #17
Valefod 3 Pack LM2596 DC to DC Voltage Regulator 4-40V to 1.5-35V Buck Converter with LED Display
Asin: B07WQJ2GD6 | Model: VA-0162-BL | PartNumber: VA-0162-BL | Ean: 0793118392197 | UPC: 793118392197
【Output Voltage】Dc 1.5V To 35V Voltage Is Continuously Adjustable, Maximum Output Current Is 3A..
【Easy To Diy】Connect To Power Source, Using A Mini Screwdriver To Increase Or Decrease Output Voltage By Adjusting The Screw On The Blue Potentiometer And Monitor Voltage With Multimeter To Get The Needed Voltage, Clockwise To Step Up Voltage And Counterclockwise To Step-Down Voltage. (Factory Default Stays A High Voltage, You Need To Contrarotate About 7-15 Circles Before The Voltage Starts Ramping Down, 1 Circle Means +/- 1V).
【Mini Size】57*36*13 Mm (With Potentiometer). 3Pcs Included..
【Input Voltage】Dc 4V To 40V (Input Voltage Must Be 1.5V Higher Than The Output Voltage, No Boost)..
Features
- High Precision The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- Input Voltage DC 4V to 40V (input voltage must be 1.5V higher than the output voltage, no boost).
- Output Voltage DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A.
- Mini Size 57*36*13 mm (with potentiometer). 3pcs included.
- Easy to DIY Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
Dimensions: 1.40 x 2.20 x 0.50 inches
See On Amazon #18
HiLetgo 5pcs DC-DC Buck Step Down Module 6-20V 12V/20V to 5V 3A USB Charger Module
Asin: B01HXU1C6U
Compatible To Arduino.
Dc-Dc Module.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #19
UMLIFE 4PCS AC/DC to DC Step Down Buck Converter AC 5-30V DC 5-48V 24V 36V 48V to DC 2.5-35V 12V Voltage Regulator Board 2A Adjustable Volt Power Supply Module
Asin: B094ZTG5S8 | Ean: 0701715466395 | UPC: 701715466395
Input Ac Voltage Ac5v~Ac30v Or Dc5v-50V. Due To The Large Fluctuation Of Ac Voltage, The Recommended Ac Voltage Range Has Been Reserved..
Input Voltage Range: Ac 5V-30V, Dc 5V-50V Output Output Range: Dc 3.3V-33V.
The Power Module Adopts Plug-In Lm2596hv, Lm2596 Version Of High Voltage, The Highest Input Voltage Is 50V(Limited By Filter Capacitor Voltage) With External Radiator, Can Withstand High Current Work..
Adjustable Ac/Dc To Dc Buck Converter Power Supply Module Voltage Regulator.
Features
- 4PCS LM2596HV AC/DC to DC Buck Step Down Converter Module 3v 3.3V 5V 6V 9V 12V 15V 24V DC 5V-50V Adjustable Step-Down 3A Power Supply
- Adjustable AC/DC to DC buck converter power supply module Voltage Regulator
- Input ac voltage AC5V~AC30V or dc5v-50v. Due to the large fluctuation of ac voltage, the recommended ac voltage range has been reserved.
- The power module adopts plug-in LM2596HV, LM2596 version of high voltage, the highest input voltage is 50V(limited by filter capacitor voltage) with external radiator, can withstand high current work.
- Input voltage range: AC 5V-30V, DC 5V-50V Output output range: DC 3.3V-33V
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Weight: 0.24 Pounds
See On Amazon
Looking For Something Else?
Search