Raidenracing Upgrade Harden Steel 50T Main Spur Gear for Arrma 1/8 Kraton Notorious Outcast Senton Talion Typhon AR310429
Asin: B08QTXZFHH | Model: RSJ6 | PartNumber: RSJ6 | Ean: 8424615657480
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.50 Tooth Hardened Steel Mod 1 (1.0 Metric Pitch) Spur Gear For Arrma 1/8 4X4 Vehicles.
Kraton: Ar106005, Ar106015, Ar106018, Ar106029/31 (Red/Green), Ara106040t1/2 (Red/Blue) - Notorious: Ar106034/6 (Black/Blue), Ara106044t1/2 (Black/Blue) - Outcast: Ar106021, Ar106027, Ar106032/3 (Silver/Orange), Ara106042t1/2 (Silv/Org) - Senton: Ar106007, Ar102654, Ar102673 - Talion: Ar106003, Ar106014, Ar106030 (2018 V3 Model), Ara106048 (V4) - Typhon: Ar106001, Ar106013, Ar106028, Ara106046.
Known To Fit The Following Arrma Vehicle Part Numbers. The Vehicle Part Number Can Be Found On Arrma's Website, The Literature That Came With The Vehicle, Or On The Vehicle Box Around The Barcode. If A Vehicle Is Marked Below With The Word "Optional, " Then The Part May Fit, But May Require Some Modification..
Replaces: Ar310429 Stock 50T Spur Gear.
Features
- Material: Harden Steel
- Replaces: AR310429 stock 50T spur gear
- 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for Arrma 1/8 4x4 Vehicles
- Known to fit the following Arrma vehicle part numbers. The vehicle part number can be found on Arrma's website, the literature that came with the vehicle, or on the vehicle box around the barcode. If a vehicle is marked below with the word optional, then the part may fit, but may require some modification.
- Kraton: AR106005, AR106015, AR106018, AR106029/31 (red/green), ARA106040T1/2 (red/blue) - Notorious: AR106034/6 (black/blue), ARA106044T1/2 (black/blue) - Outcast: AR106021, AR106027, AR106032/3 (silver/orange), ARA106042T1/2 (silv/org) - Senton: AR106007, AR102654, AR102673 - Talion: AR106003, AR106014, AR106030 (2018 V3 model), ARA106048 (V4) - Typhon: AR106001, AR106013, AR106028, ARA106046
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
See On Amazon Similar To Raidenracing Upgrade Harden Steel 50T
#1
Upgrade Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas X-MAXX XRT E-REVO 2.0 New MAXX XO-1-1 pc
Asin: B076CMVC42 | Model: B076CMVC42 | PartNumber: B076CMVC42 | Ean: 7849717313118
50 Tooth Hardened Steel Mod 1 (1.0 Metric Pitch) Spur Gear For The Traxxas E Revo2, X-Maxx 6S And 8S, Maxx 4S And Xo-1.
With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins. Refer To The Traxxas Manual For Instructions (Ref. Pg.22 - Adjusting Gear Mesh).
Color : Black.
Features
- Material: Harden Steel
- Color : Black
- 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.09 pounds
See On Amazon #2
Raidenracing Harden Steel Center Transmission 49T Main Gear for HPI 1/12 Savage XS Flux Replace 105811
Asin: B07PK42XH8 | Model: 0423SNAD13T | PartNumber: 0423SNAD13T | Ean: 8411254559725
Replace Stock 105811.
For Hpi 1/12 Savage Xs Flux.
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.04 Pounds
See On Amazon #3
Harden Steel 50T Spur Main Gear for 1/10 Traxxas Slash Stampede Rustler Hoss Bandit Jato Rally E-REVO Summit T-Maxx 4x4 Vxl 2WD 6842
Asin: B0BM4XTHW9 | Model: W6842 | PartNumber: W6842
✔Hard Steel More Durable.
✔Full Set Ready To Install.
✔Cnc Machined For Precision,Easy Upgrade From The Original Part.
✔Compatible With: 1/10 Traxxas Slash 2Wd & 4X4/Stampede 2Wd & 4×4/Rustler 2Wd & 4×4/Hoss 2Wd & 4×4/Bandit 2Wd & 4×4 Hard Steel Spur Main Gear 50T.
Features
- Replaces Part Model# Traxxas 6842
- Compatible with: 1/10 Traxxas Slash 2WD & 4x4/Stampede 2WD & 4 4/Rustler 2WD & 4 4/Hoss 2WD & 4 4/Bandit 2WD & 4 4 Hard Steel Spur Main Gear 50T
- Hard steel more durable
- CNC machined for precision,Easy upgrade from the original part
- Full Set Ready To Install
- See more on Amazon...
Brand: Generic | Manufacturer: WASRC
See On Amazon #4
Harden Steel Spur Main Gear, 50T CNC Machining Lightweight RC Car Main Gear for 1/10 RC Car
Asin: B0D4293G89 | Model: Changorong5psyxzk | PartNumber: Changorong5psyxzk
Cnc Machining: Cnc Machining Hardened Steel Structure, Excellent Structure, Stable Performance, Which Makes It Not Easy To Damage..
Easy To Install: The Compact And Lightweight Design Makes The Gear Easy To Install And Remove, Making It The Perfect Rc Car Accessory..
Premium Materials: This Steel Gear Is Made Of Premium Hardened Steel, It Is Resistant To Wear And Tear, Durable For A Long Time Use..
Applicable Models: This Remote Control Car Main Gear Is Suitable For Traxxas Slash 1/10 Rc Cars, Please Confirm The Model Of The Remote Control Car Before Use..
Features
- Laser Etching: Gears are treated with black oxidation, laser etched tooth number marks, which is precisely fit, has efficient drive.
- Applicable Models: This remote control car main gear is suitable for TRAXXAS SLASH 1/10 RC cars, please confirm the model of the remote control car before use.
- CNC Machining: CNC machining hardened steel structure, excellent structure, stable performance, which makes it not easy to damage.
- Premium Materials: This steel gear is made of premium hardened steel, it is resistant to wear and tear, durable for a long time use.
- Easy to Install: The compact and lightweight design makes the gear easy to install and remove, making it the perfect RC car accessory.
- See more on Amazon...
Brand: Changor | Manufacturer: Changor
See On Amazon
Looking For Something Else?
Search