HEATIT HICK Crankcase Heater
Asin: B08RBQHC3M
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Self-Regulating Crankcase Heater Is A 4-Ft. Heater That Fits Units Up To 40" Circumference. Can Be Overlapped Without Overheating. Moistureproof. Includes Flexible Lockstrap With 28" Wire Leads..
Do Not Use An Extension Cord To Power The Crankcase Heater. Expose Heater To Temperature Lower Than 150℉. Disconnect All Power Before Installing Or Servicing Heating Cable And Accessories. Additional Materials, Such As Junction Box And Appropriate Connection Accessories Must Be Ul Listed Or Certified For Intended Use..
The Compressor Surface Should Be Inspected To Ensure That It Is Clean And Has No Sharp Or Jagged Edges That Might Damage The Heating Cable Before The Heater Installation..
Due To The Risk Of Electrical Shock, Arcing And Fire Caused By Product Damage Or Improper Usage, Installation Or Maintenance, A Ground-Fault Protection Device With A 30Ma Trip Level Must Be Used On Each Branch Circuit Supplying Power To The Crankcase Heater..
Features
- Designed for use with refrigeration compressors up to 5 HP and 40 inches or less in circumference. The heaters should be used in non-hazardous areas. The self-regulating cable provides peak heat during cold periods and reduced heat when the air temperature rises.
- Due to the risk of electrical shock, arcing and fire caused by product damage or improper usage, installation or maintenance, a ground-fault protection device with a 30mA trip level must be used on each branch circuit supplying power to the crankcase heater.
- The self-regulating crankcase heater is a 4-ft. heater that fits units up to 40 circumference. Can be overlapped without overheating. Moistureproof. Includes flexible lockstrap with 28 wire leads.
- The compressor surface should be inspected to ensure that it is clean and has no sharp or jagged edges that might damage the heating cable before the heater installation.
- Do not use an extension cord to power the crankcase heater. Expose heater to temperature lower than 150 . Disconnect all power before installing or servicing heating cable and accessories. Additional materials, such as junction box and appropriate connection accessories must be UL listed or certified for intended use.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
See On Amazon Similar To HEATIT HICK Crankcase Heater
#1
KDP 3-ply Reinforced Silicone Engine Heater Core Bypass Kit with 2 Stainless Steel Clamps universal Fit for Most Common Heater Hoses
Asin: B0CJ81L2Z3 | Ean: 0735632403768 | UPC: 735632403768
Complete Solution- This Heater Core Kit Ontains Components And Hardware Required To Bypass A Leaking Or Failed Heater Core..
Easy Install And All-In -Kit. You Just Need To Push The Hose On And Fasten It With Our Matched Worm Clamp With A Common Screwdriver Every Family Has..
Durable: The Kdp Heater Core Bypass Hose Is Made Of High Quality Silicone Instead Of Normal Rubber,The Heater Hose Connectors Are All Made Of Pa66-Gf33, Which Is Durable And High Temperature Resistant And It Won't Cut The Pipe As Rough Aluminun Fittings..
Universal Fit And Cost-Effective - This Kdp Heater Core Bypass Kit Offers An Affordable Alternative To Replacing An Entire Failed Heater Core..
Features
- KDP heater core bypass kit is upgraded according to the products on the market, ensuring the premise of high quality and adapting to various unexpected scenarios to the greatest extent.We have our own moulds and tooling for this whole kit.
- Universal fit and Cost-effective - this KDP heater core bypass kit offers an affordable alternative to replacing an entire failed heater core.
- Complete solution- This heater core kit ontains components and hardware required to bypass a leaking or failed heater core.
- DURABLE: The KDP heater core bypass hose is made of high quality silicone instead of normal rubber,the heater hose connectors are all made of PA66-GF33, which is durable and high temperature resistant and it won't cut the pipe as rough aluminun fittings.
- Easy install and AlL-in -kit. You just need to push the hose on and fasten it with our matched worm clamp with a common screwdriver every family has.
- See more on Amazon...
Brand: KDP | Manufacturer: KDP MOTORSPORT
Weight: 103.00 Grams
See On Amazon #2
Service First HTR14977 CRANKCASE Heater
Asin: B0BBH1WH7V | Ean: 0723651972228 | UPC: 723651972228
Dims: H-3/4" W-8" L-8".
Watts: 70.
Brand: Generic | Manufacturer: SERVICE FIRST
See On Amazon #3
Muzzys HEATER CORE BYPASS KIT, Universal, Fits MOST Vehicles and ALL 5/8" and 3/4" ID Heater Hoses. Easily Stop Flow to Your Heater Core With This Premium Hi Temp Hi Pressure By-Pass Kit. Made In USA!
Asin: B0932BRSBQ | Model: 10378 | PartNumber: 10378 | Ean: 0600599657700 | UPC: 600599657700
This Kit Is 100% Safe For Your Vehicle And Won't Cause Any Damage Or Check Engine Lights. This Kit Is Comprised Of Premium Components That Will Not Fail..
This Kit Does Fit 5/8" Hoses Contrary To Several Reviewers. It Does Take A Little M. A. N. To Get A 5/8" Hose On The Nipple But It Can Be Done. If Needed You Can Use A Little Soapy Water To Get The Hose To Slide Over The Barbs On The Valve..
This Kit Includes A 4" Section Of High Quality Heater Hose So You Do Not Need To Cut Or Modify Your Oem Heater Hose To Install This Valve. Install The Supplied Valve At The End Of Your Oem Hose And Then Attach The Valve And Supplied 4" Hose To Your Engine Outlet. On Some Vehicles It Will Not Be Easily Accessible To Install This Kit On The Engine Side Of The Heater Inlet Hose. If This Is Your Case You Can Also Install The Bypass Kit On The Fitting At The Firewall Where The Inlet Hose Attaches..
This Kit Fits All 5/8" And 3/4" Heater Hose Systems Which Is Just About 99% Of All Vehicles Out There..
This Premium Kit Is Made In The Usa And Includes: One Hi-Temp/Hi-Pressure Shut Off Valve, One 4" Hi-Temp/Hi Pressure Heater Hose, Three Stainless Steel Smooth Edge Band Clamps That Will Not Cut Into Your Hoses.
Easy 5 Minute Install. Locate Your Heater Core Inlet Hose. There Will Be Two Hoses Coming From The Firewall. One Is The Heater Core "In" And The Other Is The "Out". This Kit Must Be Installed On The "In" Hose. Follow The Hoses From The Firewall And Install This Kit On The Other End. Remove The Vehicle Heater Hose From The Port On The Engine And Install The Supplied Hose, Valve, And Clamps. This Kit Can Be Installed On Either End Of The Heater In Hose. See Photos To The Left..
Features
- This kit installs in minutes without making any permanent mods to your vehicle. NO HOSE CUTTING REQUIRED! With this kit you can control flow to your heater core with a turn of the handle!
- Easy 5 Minute Install. Locate your heater core inlet hose. There will be two hoses coming from the firewall. One is the heater core in and the other is the out. This kit MUST be installed on the IN hose. Follow the hoses from the firewall and install this kit on the other end. Remove the vehicle heater hose from the port on the engine and install the supplied hose, valve, and clamps. This kit can be installed on either end of the heater IN hose. SEE PHOTOS TO THE LEFT.
- This kit is 100% safe for your vehicle and won't cause any damage or Check Engine Lights. This kit is comprised of PREMIUM components that WILL NOT fail.
- This PREMIUM kit is MADE IN THE USA and includes: ONE Hi-Temp/Hi-Pressure Shut off Valve, ONE 4 Hi-Temp/Hi Pressure Heater Hose, THREE Stainless Steel Smooth Edge Band Clamps that WILL NOT cut into your hoses
- This Kit includes a 4 section of high quality heater hose so you do not need to cut or modify your OEM heater hose to install this valve. Install the supplied valve at the END of your OEM hose and then attach the valve and supplied 4 hose to your engine outlet. On some vehicles it will not be easily accessible to install this kit on the engine side of the heater inlet hose. If this is your case you can also install the bypass kit on the fitting at the firewall where the inlet hose attaches.
- This kit fits all 5/8 and 3/4 heater hose systems which is just about 99% of all vehicles out there.
- This kit DOES fit 5/8 hoses contrary to several reviewers. It does take a little M. A. N. to get a 5/8 hose on the nipple but it can be done. If needed you can use a little soapy water to get the hose to slide over the barbs on the valve.
- See more on Amazon...
Brand: Muzzys | Manufacturer: Muzzys
See On Amazon #4
Solarhome Engine Block Immersion Heater Compatible with Cummins 5.9 6.7L Engine Heater 750W 120V 3/4" NPT
Asin: B08NGDYN3H
3/4" Npt Thread.
Works For Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
Application Models: Compatible With All 2002-2007 5.9L Cummins And 2007-2015 6.7L Cummins Engine.
Specification: 120V, 750Watts.
Features
- Product Name: Engine Block Immersion Heater;Freeze Plug Heater
- Specification: 120V, 750Watts
- 3/4 NPT thread
- Application Models: Compatible With All 2002-2007 5.9L Cummins and 2007-2015 6.7L Cummins Engine
- Works for Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
- See more on Amazon...
Brand: Solarhome | Manufacturer: Solarhome
See On Amazon #5
COPELAND CORPORATION 918001901 COPELAND CRANKCASE HEATER
Asin: B00QW2B38I
Brand: Copeland | Manufacturer: COPELAND CORPORATION
Weight: 4.00 pounds
See On Amazon #6
Trane Service First OEM Crankcase Heater - HTR03384 Replaces HTR-1298
Asin: B077KDYLDG | Model: HTR03384T | PartNumber: HTR03384T
See Product Description Below For Additional Information.
Replaces / Supersedes: Htr1221 Htr01221 Htr-1221 Htr-1221 Htr-1298 Htr1298 Htr01298 Htr-2738 Htr02738 Htr2738 Htr-3389 Htr03389 Htr3389 Htr-3868 Htr03868 Htr3868 Htr3877 Htr-3877 Htr03877 Htr4155 Htr-4155 Htr04155 Htr4418 Htr-4418 Htr04418 Htr-3384 Htr3384 Htr03384 And Other Heaters..
Unit Specific Component , Used In Various American Standard / Trane Systems.
Features
- OEM Crankcase Heater , NOT A Generic Replacement
- Unit Specific Component , Used in Various American Standard / Trane Systems
- See Product Description Below for Additional Information
- Replaces / Supersedes: HTR1221 HTR01221 HTR-1221 HTR-1221 HTR-1298 HTR1298 HTR01298 HTR-2738 HTR02738 HTR2738 HTR-3389 HTR03389 HTR3389 HTR-3868 HTR03868 HTR3868 HTR3877 HTR-3877 HTR03877 HTR4155 HTR-4155 HTR04155 HTR4418 HTR-4418 HTR04418 HTR-3384 HTR3384 HTR03384 and other heaters.
- See more on Amazon...
Brand: Trane | Manufacturer: Trane
Weight: 1.00 pounds
See On Amazon #7
Band-Style Crankcase Heaters for HVAC/R Compressors 15.3 in to 22 in, 21 Lead Length, 240V
Asin: B07RK4KNMY
Rapid Heat-Up.
Corrosion-Resistant.
Grounded For Safety.
Moisture-Proof.
Flexible And Easy To Install.
Features
- Protects A/C and heat pump compressors in cold weather
- Flexible and easy to install
- Rapid Heat-Up
- Moisture-Proof
- Corrosion-Resistant
- Grounded for safety
- See more on Amazon...
Brand: BriskHeat | Manufacturer: BriskHeat
Weight: 1.00 Pounds
See On Amazon #8
Carrier HT32TC701 Crankcase Heater
Asin: B00P0KU3T8
Brand: Carrier
See On Amazon #9
Band-Style Crankcase Heaters for HVAC/R Compressors 20.5 in to 27.1 in, 21 Lead Length 240V
Asin: B07RGX2KT5
Rapid Heat-Up.
Corrosion-Resistant.
Moisture-Proof.
Easy To Install.
Features
- Protects A/C and heat pump compressors in cold weather
- Easy to Install
- Rapid Heat-Up
- Moisture-Proof
- Corrosion-Resistant
- See more on Amazon...
Brand: BriskHeat | Manufacturer: BriskHeat
Weight: 1.00 pounds
See On Amazon #10
Copeland 918-0043-01 Heater- Crankcase
Asin: B0041NM26M | Ean: 0696498798200 | UPC: 696498798200
Features
- Price For: Each For Use With Mfr. Model Number: ZB21KCE-TF5-940 Item: Crankcase Heater, 480V, 70W Fits Brand: Copeland Country of Origin (subject to change): United States
- See more on Amazon...
Brand: Copeland | Manufacturer: COPELAND
See On Amazon #11
Rheem 44-17402-45 Crankcase Heater
Asin: B088NHBX8R | Ean: 0662766152371 | UPC: 662766152371
Brand: Rheem | Manufacturer: Rheem
See On Amazon #12
Crankcase Heater, 480V, 70W
Asin: B008FM5GDG | Ean: 0696334366471 | UPC: 696334366471
Brand: Copeland | Manufacturer: COPELAND
Weight: 1.40 pounds
See On Amazon #13
RAYCHEM Crankcase Heater, Turns On at 50 F, Min. Watts 32, 208 to 277 VAC
Asin: B07HLT3T38 | Ean: 0696333133074 | UPC: 696333133074
Brand: Raychem | Manufacturer: CAI - RAYCHEM
Dimensions: 2.10 x 9.10 x 8.60 inches | Weight: 1.00 pounds
See On Amazon #14
American Standard OEM Crankcase Heater HTR03384 / HTR-3384
Asin: B077KFHWYY | Model: HTR03384A | PartNumber: HTR03384A
See Product Description Below For Additional Information.
Replaces / Supersedes: Htr1221 Htr01221 Htr-1221 Htr-1221 Htr-1298 Htr1298 Htr01298 Htr-2738 Htr02738 Htr2738 Htr-3389 Htr03389 Htr3389 Htr-3868 Htr03868 Htr3868 Htr3877 Htr-3877 Htr03877 Htr4155 Htr-4155 Htr04155 Htr4418 Htr-4418 Htr04418 Htr-3384 Htr3384 Htr03384 And Other Heaters..
Unit Specific Component , Used In Various American Standard / Trane Systems.
Features
- OEM Crankcase Heater , NOT A Generic Replacement
- Unit Specific Component , Used in Various American Standard / Trane Systems
- See Product Description Below for Additional Information
- Replaces / Supersedes: HTR1221 HTR01221 HTR-1221 HTR-1221 HTR-1298 HTR1298 HTR01298 HTR-2738 HTR02738 HTR2738 HTR-3389 HTR03389 HTR3389 HTR-3868 HTR03868 HTR3868 HTR3877 HTR-3877 HTR03877 HTR4155 HTR-4155 HTR04155 HTR4418 HTR-4418 HTR04418 HTR-3384 HTR3384 HTR03384 and other heaters.
- See more on Amazon...
Brand: AmStd | Manufacturer: AmStd
Weight: 1.00 pounds
See On Amazon #15
Crankcase Heater, 120V, 150W
Asin: B00QW2LZYA | Ean: 6967421679311
Features
- Price For: Each For Use With Mfr. Model Number: ZP285KCE-TWD-951 Fits Brand: Copeland Item: Crankcase Heater, 120V, 150W Country of Origin (subject to change): United States
- See more on Amazon...
Brand: Copeland | Manufacturer: COPELAND
Weight: 1.35 Pounds
See On Amazon #16
COPELAND CORPORATION 918002801 COPELAND CRANKCASE HEATER
Asin: B00QW2ITW6 | Ean: 0696498798187 | UPC: 696498798187
Brand: Copeland | Manufacturer: COPELAND CORPORATION
Weight: 4.00 pounds
See On Amazon #17
Lennox 93M09 Crankcase Heater
Asin: B0067RXW6E
Brand: Lennox | Manufacturer: Lennox
See On Amazon #18
Aaon Crankcase Heater P83900 480V 90W - P83900
Asin: B0CK2RVVV8
Size : 14X14x14.
Weight : 0.225 Pounds.
Aaon Parts Come From A World Leader In Creating Comfortable And Healthy Indoor Environments.
Features
- This is a genuine OEM (Original Equipment Manufacturer) part.
- Aaon parts come from a world leader in creating comfortable and healthy indoor environments
- Size : 14x14x14
- Weight : 0.225 pounds
- See more on Amazon...
Brand: Aaon | Manufacturer: Aaon
Dimensions: 14.00 x 14.00 x 14.00 inches | Weight: 0.23 pounds
See On Amazon #19
Band-Style Crankcase Heaters for HVAC/R Compressors 27.3 in to 34 in, 48 Lead Length 480V or 400V
Asin: B07RM6V5R4
Rapid Heat-Up.
Corrosion-Resistant.
Moisture-Proof.
Easy To Install.
Features
- Protects A/C and heat pump compressors in cold weather
- Easy to Install
- Rapid Heat-Up
- Moisture-Proof
- Corrosion-Resistant
- See more on Amazon...
Brand: BriskHeat | Manufacturer: BriskHeat
Weight: 1.00 pounds
See On Amazon
Looking For Something Else?
Search