Drill America 5/8" Reduced Shank High Speed Steel Black & Gold Contractor Drill Bit with 3-Flat 1/2" Shank, KFD3F Series
Asin: B08SF96FX4 | Model: KFD3F5/8 | PartNumber: KFD3F5/8 | Ean: 0887861294331 | UPC: 887861294331
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.135 Degree Split Point Tip For Self-Centering And Reducing Thrust. Compared To A Conventional 118 Degree Tip, These Drills Wont Go "Walking" On You..
Common Flute And Overall Length For Minimal Adjustment During Tool Changes. 3" Flute Length, 6" Overall Length, 1/2" Shank.
3-Flat 1/2" Reduced Shank Creates An Extra Secure Hold In Your Chuck..
For Use In A Wide Range Of Materials In The Iron And Steel Families Such Aluminum, Iron, Steel And Other Metal Drilling..
Features
- Contractor grade drill bit manufactured from M1 High Speed Steel.
- For use in a wide range of materials in the iron and steel families such aluminum, iron, steel and other metal drilling.
- 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go walking on you.
- 3-Flat 1/2 reduced shank creates an extra secure hold in your chuck.
- Common flute and overall length for minimal adjustment during tool changes. 3 Flute Length, 6 Overall Length, 1/2 Shank
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.63 x 6.00 x 0.63 inches | Weight: 0.21 Pounds
See On Amazon Similar To Drill America 5 8 Reduced
#1
Drill America - DWDRSD5/8 5/8" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIEV0O | Model: DWDRSD5/8 | PartNumber: DWDRSD5/8 | Ean: 0887861033992 | UPC: 887861033992
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.40 x 7.00 x 0.60 inches | Weight: 0.30 Pounds
See On Amazon #2
Drill America - KFDRSD3/8X5/8 5/8" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 3/8" Shank, KFD Series
Asin: B01BKTNHMC | Model: KFDRSD3/8X5/8 | PartNumber: KFDRSD3/8X5/8 | Ean: 0887861227254 | UPC: 887861227254
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #3
Drill America - DWDDL8X5/16 5/16" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHOL1O | Model: DWDDL8X5/16 | PartNumber: DWDDL8X5/16 | Ean: 0887861060554 | UPC: 887861060554
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #4
Drill America - DWDCO5/8 5/8" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series
Asin: B00FXHD2PK | Model: DWDCO5/8 | PartNumber: DWDCO5/8 | Ean: 0887861041980 | UPC: 887861041980
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 4.00 x 6.00 x 4.00 inches | Weight: 0.10 Pounds
See On Amazon #5
Drill America 25 Piece Metric Killer Force Drill Bit Set in Round Case, Jobber Length, Heavy Duty, High Speed Steel Bits for Metal, Wood, Plastic, Sizes 1mm to 13mm by 0.5mm, KFD Series ZMKFD4025-PC
Asin: B0BTTQQV28 | Model: ZMKFD4025-PC | PartNumber: ZMKFD4025-PC | Ean: 0887861316583 | UPC: 887861316583
Heavy Duty Cutting: 135 Degree Split Point For Self-Centering And Fast Precision Drilling; Round Shanks Allow Use With Many Tool Holding Systems; When Run Counterclockwise (Right Hand Cut) Spiral Fluted Tools Evacuate Chips To Reduce Clogging.
About Drill America: Drill America Specializes In Supplying A Full Line Of Industrial And Contractor Cutting Tools Since 1923; Our Products Include Drills, Taps And Dies, Reamers, End Mills, Carbide Burs, Countersinks And More.
Metric Sizes Included: Full 25Pc Drill Bit Set Comes With Plastic Storage Holder Case And Includes Metric Sizes Ranging From 1Mm To 13Mm By 0.5Mm.
Best Uses: Can Be Used For Most General Use Applications And Compatible For Multi Material Drilling With Aluminum, Iron, Wood, Plastic And Stainless Steel, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- PREMIUM GRADE: KFD Killer Force Jobber Length Drill Bits are manufactured from M2 premium grade, high speed steel with a gold and black surface treated for use with stainless steel and other hard metal drilling
- BEST USES: Can be used for most general use applications and compatible for multi material drilling with aluminum, iron, wood, plastic and stainless steel, offering a combination of hardness and toughness for wear resistance
- HEAVY DUTY CUTTING: 135 degree split point for self-centering and fast precision drilling; Round shanks allow use with many tool holding systems; When run counterclockwise (right hand cut) spiral fluted tools evacuate chips to reduce clogging
- METRIC SIZES INCLUDED: Full 25pc drill bit set comes with plastic storage holder case and includes metric sizes ranging from 1mm to 13mm by 0.5mm
- ABOUT DRILL AMERICA: Drill America specializes in supplying a full line of industrial and contractor cutting tools since 1923; Our products include drills, taps and dies, reamers, end mills, carbide burs, countersinks and more
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #6
Drill America 5 Piece High-Speed Steel Extra-Long Drill Bit Set (1/4 - 1/2" x 12" Long), POU Series
Asin: B01H7PUK32 | Model: POUDWDDL12 | PartNumber: POUDWDDL12 | Ean: 0887861241809 | UPC: 887861241809
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Sizes included are 1/4", 5/16", 3/8", 7/16" and 1/2" with overall length of 12"
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of tool holding systems
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
Weight: 1.00 pounds
See On Amazon #7
Drill America - DWDDL12X5/8 5/8" x 12" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHJH86 | Model: DWDDL12X5/8 | PartNumber: DWDDL12X5/8 | Ean: 0887861061186 | UPC: 887861061186
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #8
Drill America - DEWCCD4 #4 Regular High Speed Steel Combined Drill Bit and Countersink, Dew Series
Asin: B00FXBP9D4 | Model: DEWCCD4 | PartNumber: DEWCCD4 | Ean: 0887861060134 | UPC: 887861060134
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For Producing Center Holes In Work Pieces Which Require Machining Between Centers.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Used for producing center holes in work pieces which require machining between centers
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #9
Drill America 5 Piece High Speed Steel Aircraft Extension Drill Bit Set (1/4 - 1/2" x 6" Long), POU Series
Asin: B01HBH7MPK | Model: POUA/CX6 | PartNumber: POUA/CX6 | Ean: 0887861241786 | UPC: 887861241786
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Manufactured To National Aerospace Standard 907.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Sizes included are 1/4", 5/16", 3/8", 7/17" and 1/2" with overall length of 6"
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
See On Amazon #10
Drill America 5/8" Reduced Shank Cobalt Drill Bit with 1/2" Shank, D/ACO Series
Asin: B00ARI51HC | Model: D/ACO5/8 | PartNumber: D/ACO5/8 | Ean: 0887861005913, 0887861015585 | UPC: 887861005913, 887861015585
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 1.20 x 6.20 x 1.20 inches | Weight: 0.99 Pounds
See On Amazon #11
Drill America - DWCT1110 5/16" X 3/8" High Speed Steel 2 Flute Single End Ball End Mill, DWC Series
Asin: B00FXFUIUO | Model: DWCT1110 | PartNumber: DWCT1110 | Ean: 0887861158244 | UPC: 887861158244
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Designed To Machine Most Materials Of Medium Hardness Such As Steel, Brass, Bronze And Iron.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Available In Polished Finish.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Available in polished finish
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
- See more on Amazon...
First Available: 11/25/2017
Brand: Drill America | Manufacturer: Drill America
See On Amazon #12
Drill America - DWDA/CX125/16 5/16" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B2QXXCI | Model: DWDA/CX125/16 | PartNumber: DWDA/CX125/16 | Ean: 0887861044509 | UPC: 887861044509
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon #13
Drill America - DWCT1128 5/8" X 5/8" High Speed Steel 2 Flute Single End Ball End Mill, DWC Series
Asin: B00FXFVAVK | Model: DWCT1128 | PartNumber: DWCT1128 | Ean: 0887861158305 | UPC: 887861158305
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Designed To Machine Most Materials Of Medium Hardness Such As Steel, Brass, Bronze And Iron.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Available In Polished Finish.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Available in polished finish
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #14
Drill America SDS588 5/8" x 8" SDS-Plus Hammer Bit Drill Bit, SDS Series
Asin: B00FXNJAGY | Model: SDS588 | PartNumber: SDS588 | Ean: 0887861054829 | UPC: 887861054829
Sds Plus Shank Hammer Bit.
Especially Suited For Drilling In Stone Or Concrete.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- SDS Plus shank hammer bit
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Especially suited for drilling in stone or concrete
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.10 Pounds
See On Amazon #15
Drill America DMS73-1030 5/8" x 18" Ship Auger Bit, DMS Series
Asin: B00FXE5GPM | Model: DMS73-1030 | PartNumber: DMS73-1030 | Ean: 0887861176583 | UPC: 887861176583
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
For Woodworking.
Comes Individually Packaged.
Comes With Polished Finish.
Features
- Made of carbon steel
- Comes with polished finish
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Comes individually packaged
- For woodworking
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #16
Drill America - DWDMM8.50P6 8.50mm High Speed Steel Drill Bit (Pack of 6), DWDMM Series
Asin: B00FXI2QY2 | Model: DWDMM8.50P6 | PartNumber: DWDMM8.50P6 | Ean: 0887861201858 | UPC: 887861201858
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #17
Drill America 5/8" High Speed Steel Heavy Duty Split Point Stub Drill Bit, DWDST Series
Asin: B00FXIPJ0K | Model: DWDST5/8 | PartNumber: DWDST5/8 | Ean: 0887861031004 | UPC: 887861031004
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Portable Or Machine Drilling.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for portable or machine drilling
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 4.00 x 6.00 x 4.00 inches
See On Amazon #18
Drill America DAM6X5/8X1/2 5/8" x 6" 1/2" Shank Carbide Tipped Masonry Drill Bit, Dam Series
Asin: B00B4ZNLJM | Model: DAM6X5/8X1/2 | PartNumber: DAM6X5/8X1/2 | Ean: 0887861053853 | UPC: 887861053853
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Designed For Use In Portable Electric Drill.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Designed for use in portable electric drill
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #19
Drill America - DWDN5/8 5/8" High Speed Steel Black Oxide Drill Bit, DWDN Series
Asin: B00FXI6I7S | Model: DWDN5/8 | PartNumber: DWDN5/8 | Ean: 0887861018463 | UPC: 887861018463
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
First Available: 05/15/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 4.00 x 6.00 x 4.00 inches | Weight: 0.10 Pounds
See On Amazon
Looking For Something Else?
Search