WADEKING WHW Bike Pegs 4.3" Length,Suitable for 14mm Axles, Freestyle BMX Bicycles,Durable and Stylish Non-Slip (Black 1)
Asin: B08THZT43F | Model: WKP38 | PartNumber: WKP38 | Ean: 6971686542136, 6971686542167
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Installation Method:Mounted On The Rear Axle Of The Bicycle To Ensure That The Shaft Is Longer Than 0.5 Cm. If The Length Of The Bicycle Axle Is Too Short. It Is Necessary To Remove The Screws On The Shaft And Then Install The Pegs On The Shaft, Which Is More Secure..
Material: Made Of High Quality Aluminum Alloy, High Strength & Wear Resistant.
Function: Suitable For Front And Rear Axles, Convenient Tool For Picking Up Another Person By Bicycle, Support Your Feet..
Dimensions: 110Mm * 35Mm (4.33In * 1.37In),Suitable For M14*1 Axles.First, Measure Whether The Axle Size Data Of Your Bicycle Is Consistent..
Features
- Craft: Use quenching to enhance the strength of aluminum alloy and prevent thread striping. Better grip, increased foot friction and reduced slippage.
- Dimensions: 110mm * 35mm (4.33in * 1.37in),Suitable for M14*1 axles.first, measure whether the axle size data of your bicycle is consistent.
- Installation method:Mounted on the rear axle of the bicycle to ensure that the shaft is longer than 0.5 cm. If the length of the bicycle axle is too short. It is necessary to remove the screws on the shaft and then install the pegs on the shaft, which is more secure.
- Function: Suitable for front and rear axles, Convenient tool for picking up another person by bicycle, Support your feet.
- Material: Made of high quality aluminum alloy, high strength & wear resistant
- See more on Amazon...
Brand: WADEKING WHW | Manufacturer: WADEKING
Dimensions: 1.50 x 4.33 x 1.50 inches
See On Amazon Similar To WADEKING WHW Bike Pegs 4.3
#1
Mongoose Freestyle Steel Pegs, Compatible for Most BMX Bike and Freestyle Bicycle Axles, Set of Two, Chrome
Asin: B0001NDWHE | Model: MG505T 4PK | PartNumber: MG505T 4PK | Ean: 0026599727197 | UPC: 026599727197
Includes 2 Freestyle Pegs.
Mongoose Offers A 1 Year Limited Warranty.
Made From Chrome-Plated Steel For Durability.
Features
- Compatible with most BMX and freestyle bike axles
- Made from chrome-plated steel for durability
- Includes 2 freestyle pegs
- Mongoose offers a 1 year limited warranty
- See more on Amazon...
First Available: 09/08/2006
Brand: Mongoose | Manufacturer: Protective Technologies
Dimensions: 1.80 x 10.60 x 5.70 Inches | Weight: 1.20 pounds
Warranty: No warranty.
See On Amazon #2
Odyssey MPEG Alex Pegs, 14mm, Black
Asin: B0096XMXAM | Model: 97696 | PartNumber: 97696 | Ean: 0630950010929, 0058817799051 | UPC: 630950010929, 058817799051
Three Anti-Roll Positions.
Smaller Outer Diameter.
Brand: Odyssey | Manufacturer: J&B Importers, Inc.
Dimensions: 1.00 x 8.00 x 4.00 inches | Weight: 1.13 pounds
See On Amazon #3
WADEKING WHW BMX Bike Pegs 4.3" Compatible with Both 14mm and 3/8 Inch Axles, Wheel Studs Aluminum Alloy Durable and Stylish Non-Slip (Black)
Asin: B0BLZLXYNC | Model: WADE P3/8-14MM | PartNumber: WADE P3/8-14MM
Installation Method: First, You Need To Remove The Nut On The Shaft, Then Pass The Pegs Through The Shaft And Lock It With The Nut. (Please Bring Your Own Socket Wrench Tool)..
Material: Lightweight And Durable High-Quality Aluminum Alloy, With High Strength And Wear Resistance, Sold In Pairs.
Function: Applicable To The Front And Rear Axles, A Tool That Is Convenient To Pick Up And Drop Off Others By Bicycle, And Support Your Feet. Also Suitable For Some Electric Bicycles..
Dimensions: 110Mm * 38Mm (4.33In * 1.49In), Compatible With 14Mm And 3/8" Axles. Use The Included Adapter To Make The Pegs Fully Compatible With 3/8 Axles..
Features
- Process: The strength of aluminum alloy is enhanced by quenching. Better grip, increased friction with the foot and reduced slippage. More durable than other iron and plastic pegs.
- Dimensions: 110mm * 38mm (4.33in * 1.49in), compatible with 14mm and 3/8 axles. Use the included adapter to make the pegs fully compatible with 3/8 axles.
- Installation method: First, you need to remove the nut on the shaft, then pass the pegs through the shaft and lock it with the nut. (Please bring your own socket wrench tool).
- Function: Applicable to the front and rear axles, a tool that is convenient to pick up and drop off others by bicycle, and support your feet. Also suitable for some electric bicycles.
- Material: Lightweight and durable high-quality aluminum alloy, with high strength and wear resistance, sold in pairs
- See more on Amazon...
Brand: WADEKING WHW | Manufacturer: WDEKING
Weight: 0.51 Pounds
Warranty: 90-Day Money Back Guarantee - We are so sure that you will be satisfied with your purchase that we offer a 90-day money back guarantee to ensure that our customers are satisfied with our products. If for any reason you want to stop using the product, we will promptly issue a refund.
See On Amazon #4
KINSPORY 4PCS Bike Pegs for 3/8 inch Axles, Aluminum Alloy Anti-Skid BMX Bicycle Pegs for Mountain Bike Backseats Stands Cycling Rear Stunt Pegs (Black)
Asin: B0BRPZPNQ8 | Model: L0045 | PartNumber: L0045
Cylinder Shape Carved With Non-Slipping Stripe.
Easy To Install And Disassemble By Though 3/8 Inch - 26 Teeth.
0.26Lb Weight, 3.93*1.11 Inch Displayed Size, Convenient To Carry.
Designed For 3/8 Inch - 26 Teeth Regular Bike.
Features
- Suitable for both front and back wheel axles of bicycle
- Designed for 3/8 inch - 26 Teeth Regular bike
- Cylinder shape carved with non-slipping stripe
- 0.26lb weight, 3.93*1.11 inch displayed size, convenient to carry
- Easy to install and disassemble by though 3/8 inch - 26 teeth
- See more on Amazon...
Brand: KINSPORY | Manufacturer: KINSPORY
See On Amazon #5
KINSPORY 3/8 inch - 26 Teeth Aluminum Alloy Bike Pegs Backseats Stands Pack of 2 (Rainbow)
Asin: B098N7S7P1
Cylinder Shape Carved With Non-Slipping Stripe.
Easy To Install And Disassemble By Though 3/8 Inch - 26 Teeth.
0.26Lb Weight, 3.93*1.11 Inch Displayed Size, Convenient To Carry.
Designed For 3/8 Inch - 26 Teeth Regular Bike.
Features
- Suitable for both front and back wheel axles of bicycle
- Designed for 3/8 inch - 26 Teeth Regular bike
- Cylinder shape carved with non-slipping stripe
- 0.26lb weight, 3.93*1.11 inch displayed size, convenient to carry
- Easy to install and disassemble by though 3/8 inch - 26 teeth
- See more on Amazon...
Brand: KINSPORY | Manufacturer: KINSPORY
Weight: 0.26 pounds
See On Amazon #6
Zelerdo 4 Pack Aluminum Alloy Bike Pegs Foot Pedals Backseats Stands Fit 3/8 inch Axles (Black Mixed Silver, 100x28 mm)
Asin: B08NHJQNLX | Model: ZE-965 | PartNumber: ZE-965 | Ean: 0740881384010 | UPC: 740881384010
Fit 3/8 Inch Axles.Easy To Use: Tighten This Bike Pegs By Tool Or Hand Directly.
Designed For Bmx / Mountain Bike / Regular Bike,Suitable For Both Front And Back Wheel Axles Of Bicycle..
Size: 100*28 Mm / 3.93*1.1 Inch.
Made Of High-Strength Aluminum Alloy, Max Capacity Up To 200Lb..
Features
- Package included:2 pairs bike pegs
- Made of high-strength Aluminum Alloy, max capacity up to 200lb.
- Fit 3/8 inch axles.Easy to use: Tighten this bike pegs by tool or hand directly
- Size: 100*28 mm / 3.93*1.1 inch
- Designed for BMX / Mountain bike / Regular bike,Suitable for both front and back wheel axles of bicycle.
- See more on Amazon...
Brand: Zelerdo | Manufacturer: ZEZZ
Warranty: 1 YEAR
See On Amazon #7
Novatec Steel Pegs for 3/8 inch axles, Black
Asin: B001V5GBSI | Model: 329985 | PartNumber: 329985 | Ean: 0698238400886 | UPC: 698238400886
110Mm In Length.
Black In Color.
38Mm In Width.
Fits 3/8 Inch Axles Threads Are 24T.
Features
- Steel construction
- Fits 3/8 inch axles threads are 24t
- 110mm in length
- 38mm in width
- Black in color
- See more on Amazon...
First Available: 10/15/2008
Brand: Nova | Manufacturer: Cycle Force Group
Dimensions: 0.01 x 4.33 x 1.50 Inches | Weight: 1.04 Pounds
Warranty: 1 year
See On Amazon #8
NOSTIFY 2PC 3/8 inch - 26 Teeth Aluminum Alloy Bike Pegs - Red
Asin: B07QNX8M17 | Model: N00011 | PartNumber: N00011 | Ean: 8002124790685
Easy To Install And Disassemble By Though 3/8 Inch - 26 Teeth.
0.26Lb Weight, 3.93*1.11 Inch Displayed Size, Convenient To Carry.
Cylinder Shape Carved With Non-Slipping Stripe.
Suitable For Both Front And Back Wheel Axles Of Bicycle.
Features
- Designed for 3/8 inch - 26 Teeth Mountain bike & Regular bike
- Suitable for both front and back wheel axles of bicycle
- Easy to install and disassemble by though 3/8 inch - 26 teeth
- Cylinder shape carved with non-slipping stripe
- 0.26lb weight, 3.93*1.11 inch displayed size, convenient to carry
- See more on Amazon...
Brand: NOSTIFY | Manufacturer: NOSTIFY
Weight: 0.26 pounds
See On Amazon #9
WADEKING Aluminum Alloy Bike Pegs,Fit 3/8 inch Axles,Foot Pedals Backseats Stands,Durable, Non-Slip(2 Pieces)(Black)
Asin: B083HK55BH | Model: WK1 | PartNumber: WK1 | Ean: 6971686540613
Made Of High-Strength Aluminum Alloy; Lightweight..
Installation Method: The Length Of The Shaft Of The Bicycle Is Too Short. It Is Necessary To Remove The Screws On The Shaft And Then Put The Pegs On The Shaft, Which Is Much Safer..
Suitable For Both Front And Back Wheel Axles Of Bicycle..
100Mm * 28Mm (3.93In * 1.1In), This Applies To 3 / 8 Inch Shaft X 26T, First Ensure The Shaft Size Of Your Bicycle. This Pin Is Not Suitable For 14 Mm..
Features
- stylish engraving, enhanced rough surface. Better grip, increase the friction when the foot is pressed, and it is not easy to slip.
- 100mm * 28mm (3.93in * 1.1in), this applies to 3 / 8 inch shaft x 26T, first ensure the shaft size of your bicycle. This pin is not suitable for 14 mm.
- Made of high-strength aluminum alloy; Lightweight.
- Suitable for both front and back wheel axles of bicycle.
- Installation method: The length of the shaft of the bicycle is too short. It is necessary to remove the screws on the shaft and then put the pegs on the shaft, which is much safer.
- See more on Amazon...
Brand: WADEKING | Manufacturer: WADEKING
Dimensions: 1.10 x 3.90 x 1.10 inches | Weight: 0.26 Pounds
See On Amazon #10
Odyssey MPEG 14mm Pegs with 3/8" Adaptor Sold in Pairs Chrome
Asin: B0096XNI9W | Model: MPEG | PartNumber: MPEG | Ean: 0630950010936 | UPC: 630950010936
Brand: Odyssey | Manufacturer: Odyssey
Dimensions: 1.50 x 4.50 x 4.50 inches | Weight: 1.00 Pounds
See On Amazon #11
WADEKING Bike Pegs 4.3" Length, Fit 3/8 inch Axles, for Freestyle BMX Bikes and All Kinds of Bicycles, Durable, Stylish Non-Slip Carving 2 Pieces (Light Blue)
Asin: B07XJL1G95 | Model: WK | PartNumber: WK | Ean: 6971686540569
Material: Made Of High-Strength Aluminum Alloy, Cold Extruded, Once Formed. Load Capacity Can Reach 100Kg (220Lb)..
Function: Ordinary Bicycle, Which Allows You To Sit On The Bicycle And Support Your Feet. Bmx/Mountain Bikes Are Not Suitable For Standing For A Long Time, And More Are To Protect The Shifting Gear From Scratching..
Installation Method: The Length Of The Shaft Of The Bicycle Is Too Short. It Is Necessary To Remove The Screws On The Shaft And Then Put The Pegs On The Shaft, Which Is Much Safer..
Product Size: 110Mm * 38Mm (4.33In * 1.5In), This Applies To 3 / 8 Inch Shaft X 26T, First Ensure The Shaft Size Of Your Bicycle..
Features
- Craft Design: stylish engraving, enhanced rough surface. Better grip, increase the friction when the foot is pressed, and it is not easy to slip.
- Product Size: 110mm * 38mm (4.33in * 1.5in), this applies to 3 / 8 inch shaft x 26T, first ensure the shaft size of your bicycle.
- Material: Made of high-strength aluminum alloy, cold extruded, once formed. Load capacity can reach 100kg (220lb).
- Installation method: The length of the shaft of the bicycle is too short. It is necessary to remove the screws on the shaft and then put the pegs on the shaft, which is much safer.
- Function: Ordinary bicycle, which allows you to sit on the bicycle and support your feet. BMX/mountain bikes are not suitable for standing for a long time, and more are to protect the shifting gear from scratching.
- See more on Amazon...
Brand: WADEKING | Manufacturer: WADEKING
Weight: 0.20 pounds
See On Amazon #12
WADEKING Bike Pegs 4.3" Length,2 Pieces,Suitable for 3/8 inch Axles, Free-Style BMX Bicycles and Various Bicycles, Durable and Stylish Non-Slip (Upgraded Version Aluminum Alloy) (Light Blue)
Asin: B08QV8M4TW | Model: WK38 | PartNumber: WK38 | Ean: 6971686542051
Specification:Suitable For Both Front And Back Wheel Axles Of Bicycle.But It Does Not Meet The Thread Diameter Of 14Mm Or More..
Function: Ordinary Bicycle, Which Allows You To Sit On The Bicycle And Support Your Feet. Bmx/Mountain Bikes Are Not Suitable For Standing For A Long Time, And More Are To Protect The Shifting Gear From Scratching..
Installation Method: If The Length Of The Bicycle Axle Is Too Short. It Is Necessary To Remove The Screws On The Shaft And Then Install The Pegs On The Shaft, Which Is More Secure..
Dimensions: 110Mm * 38Mm (4.33In * 1.5In) Thickness 3Mm (0.12In). Suitable For 3/8 Inch Shaft X 26T Front And Rear Axles.First, Measure Whether The Axle Size Data Of Your Bicycle Is Consistent..
Features
- Craft: Use quenching to enhance the strength of aluminum alloy and prevent thread striping. Better grip, increased foot friction and reduced slippage.
- Dimensions: 110mm * 38mm (4.33in * 1.5in) thickness 3mm (0.12in). Suitable for 3/8 inch shaft x 26T front and rear axles.First, measure whether the axle size data of your bicycle is consistent.
- Specification Suitable for both front and back wheel axles of bicycle.But it does not meet the thread diameter of 14mm or more.
- Installation method: If the length of the bicycle axle is too short. It is necessary to remove the screws on the shaft and then install the pegs on the shaft, which is more secure.
- Function: Ordinary bicycle, which allows you to sit on the bicycle and support your feet. BMX/mountain bikes are not suitable for standing for a long time, and more are to protect the shifting gear from scratching.
- See more on Amazon...
Brand: WADEKING | Manufacturer: WADEKING
Weight: 0.49 pounds
See On Amazon #13
KINSPORY 4PCS Bike Pegs for 3/8 inch Axles, Aluminum Alloy Anti-Skid BMX Bicycle Pegs for Mountain Bike Backseats Stands Cycling Rear Stunt Pegs (Black, Stripe)
Asin: B0BRN8NRJS | Model: L0045 | PartNumber: L0045
Cylinder Shape Carved With Non-Slipping Stripe.
Easy To Install And Disassemble By Though 3/8 Inch - 26 Teeth.
0.26Lb Weight, 3.93*1.11 Inch Displayed Size, Convenient To Carry.
Designed For 3/8 Inch - 26 Teeth Regular Bike.
Features
- Suitable for both front and back wheel axles of bicycle
- Designed for 3/8 inch - 26 Teeth Regular bike
- Cylinder shape carved with non-slipping stripe
- 0.26lb weight, 3.93*1.11 inch displayed size, convenient to carry
- Easy to install and disassemble by though 3/8 inch - 26 teeth
- See more on Amazon...
Brand: KINSPORY | Manufacturer: KINSPORY
See On Amazon #14
4 PCS Bike Foot Pegs, 4 inch Length Aluminum Alloy Cylinder Anti-Skid Fit 3/8 inch Axles (BLACK)
Asin: B07ZM7SYSP | Ean: 0710731290846 | UPC: 710731290846
Beautiful Appearance, Meticulous Carving, Make Your Lovely Bicycle Unique..
Package Include Two Pair Bike Pegs. 3 Colors You Can Select..
Super Load Bearing:≤100Kg (200Lb),Please Don't Worry When You Cycling..
Product Size : 10Cm*2.8Cm, This Is Suit For Adult..
Features
- This is suit for 3/8 inch axle x 26T, Please make sure the axle size of your bike.
- Product Size : 10cm*2.8cm, This is suit for adult.
- Beautiful appearance, meticulous carving, Make your lovely bicycle unique.
- Super load bearing: 100kg (200lb),Please don't worry when you cycling.
- Package include two pair Bike Pegs. 3 colors you can select.
- See more on Amazon...
Brand: Mantain | Manufacturer: Mantain
Weight: 0.28 pounds
See On Amazon #15
WADEKING WHW Quick-Release Bike Pegs, Suitable for 3/8-inch Axles, with Tools, for Mountain Bicycle Pedal Rear Seat Bracket, Durable, Non-Slip Carving (2 Pcs)(Black(Unthreaded))
Asin: B0B95S4F4L | Model: WADE1 | PartNumber: WADE1 | Ean: 6971686542518
Made Of High-Strength Aluminum Alloy; Lightweight..
Installation Requirements: Find A Hole Suitable For The Rear Wheel And Leave Enough Screw Length To Avoid Blocking The Chain..
Combined With The Seat, It Will Be Comfortable And Safe To Ride, It Is Only 8.5Cm In Length, Suitable For Children And Teenagers..
Scaly Carving, Enhanced Rough Surface. Better Grip, Increased Friction When Stepping On Your Feet, Making It Less Slippery..
Features
- 85mm * 25mm (3.34in * 0.98in),4 pairs of screws, 3 types of allen wrenches, suitable for reserved screw holes for rear wheels, not for 14mm and 3/8 size bicycles.
- Scaly carving, enhanced rough surface. Better grip, increased friction when stepping on your feet, making it less slippery.
- Made of high-strength aluminum alloy; Lightweight.
- Combined with the seat, it will be comfortable and safe to ride, it is only 8.5cm in length, suitable for children and teenagers.
- Installation requirements: Find a hole suitable for the rear wheel and leave enough screw length to avoid blocking the chain.
- See more on Amazon...
Brand: WADEKING WHW | Manufacturer: WADEKING
Warranty: No warranty required
See On Amazon
Looking For Something Else?
Search