MakerFocus 2pcs OLED Display Module I2C 128X64 1.3 Inch Display Module SSD1106 White with Pins for Ar duino UNO R3 Raspberry Pi 51 MCU STIM 32
Asin: B08V97FYD2 | Model: 128X64 1.3 Inch SSD1106 | PartNumber: 128X64 1.3 Inch SSD1106
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Four Square Holes Are Easy To Install.
Super Low Power Consumption.
Support I2c Communication Protocol.
128 X 64 Pixel: Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software.
Features
- Application: These serial modules can be used for Raspberry Pi 5/4B/3B+/3B/2B/Zero, Beagle Bone Black, Ar duino UNO and Mega, 51 MCU, STIM 32 and so on. Showing graphical & textual information directly on your micro-controller projects
- 128 X 64 Pixel: Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software
- Four square holes are easy to install
- Support I2c communication Protocol
- Super Low Power Consumption
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Weight: 0.03 Pounds
See On Amazon Similar To MakerFocus 2pcs OLED Display Module
#1
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico
Asin: B072Q2X2LL | Model: U602602 | PartNumber: U602602
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software. We Offer Technical Support And Software Library As Well As The Guide Book In The Package. Note: The Display Part Is 15Mm±0.5 Tall..
Need More Than 1 Pc? Please Refer To Asin: B08ky21sr2 (2Pcs).
Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.
Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc, Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W.
Features
- UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
- Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package. Note: the display part is 15mm 0.5 tall.
- Need more than 1 pc? Please refer to Asin: B08KY21SR2 (2pcs)
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.00 Pounds
See On Amazon #2
Hosyond 3pcs I2C IIC 1602 LCD Display Module 16x02 LCD Screen Module for Arduino Raspberry Pi
Asin: B0BWTFN9WF | Ean: 0732214748071 | UPC: 732214748071
Power Supply: 5V; I2c Address: 0X27; Wiring Method: Gnd—Gnd, Vcc—Vcc, Sda—A4, Scl—A5..
Widely Used In: Internet Of Things, School Electronics Projects, Smart Buildings, Maker Diy Projects, Etc., Can Display Letters, Characters, Numbers, Real-Time Clock Or Temperature..
Compatible With Most Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32, Etc..
Built-In Independent Potentiometer, Backlight Can Be Adjusted Through The Back Potentiometer..
Features
- 1602 LCD screen can display 2 lines x 16 characters, with i2c serial interface, blue display.
- Built-in independent potentiometer, backlight can be adjusted through the back potentiometer.
- Power supply: 5v; I2C address: 0x27; wiring method: GND GND, VCC VCC, SDA A4, SCL A5.
- Compatible with most development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32, etc.
- Widely used in: Internet of Things, school electronics projects, smart buildings, maker DIY projects, etc., can display letters, characters, numbers, real-time clock or temperature.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Warranty: Hosyond
See On Amazon #3
SunFounder IIC I2C TWI 1602 Serial LCD Module Display Compatible with Arduino R3 Mega 2560 16x2
Asin: B019K5X53O | Model: TS0351 | PartNumber: TS0351 | Ean: 0701715367685 | UPC: 701715367685
With A Potentiometer Used To Adjust Backlight And Contrast..
Address Of The Module: Ox27..
Power Supply: +5V.
Support Iic Protocol. The I2c Lcd1602 Library Is Provided, So You Can Call It Directly..
Features
- Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line).
- Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly.
- With a potentiometer used to adjust backlight and contrast.
- Power supply: +5V
- Address of the module: ox27.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.40 x 4.90 x 1.70 inches
Warranty: 1 Year Warranty
See On Amazon #4
Hosyond 5 Pcs 0.91 Inch I2C OLED Display Module IIC OLED Screen DC 3.3V~5V Compatible with Arduino Raspberry PI (White Display Color)
Asin: B09MZ8DW4R | Ean: 0761325160571 | UPC: 761325160571
Compatible With Arduino Nano, R3 Board, Raspberry Pi 4B/3B+/3B/2B/Zero,Esp8266, Esp32, Stm32, Etc..
What Will You Get: There Are 5 Pieces Oled Display Module Oled Display Module For You..
Working Power:3.3-5V, Operating Temperature: -40 - 85 ℃..
Low Power Consumptio; Ssd 1306 Oled Display; I2c Oled Display, Iic (I2c Communications) Simplifies Connection..
Features
- Resolution: 128 x 32 0.91 Inch OLED display, no need backlight, self-illumination, Display Color: White.
- Low power consumptio; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connection.
- Compatible with Arduino nano, R3 board, Raspberry Pi 4B/3B+/3B/2B/Zero,ESP8266, ESP32, STM32, etc.
- Working power:3.3-5v, Operating temperature: -40 - 85 .
- What will you get: there are 5 pieces OLED display module OLED display module for you.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 0.12 x 1.57 x 0.38 inches | Weight: 0.04 Pounds
See On Amazon #5
Hosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (Blue)
Asin: B0BFD4X6YV | Ean: 0782917535591 | UPC: 782917535591
It Compatibles With Arduino Nano, R3 Board And Mega, Raspberry Pi, 51 Mcu, Stim 32, Etc..
There Are No Fonts Embedded In The Oled Controller, Users Can Create Fonts Through Font Generation Software..
No Backlight Is Required, And The Display Unit Can Be Self-Luminous. It Has Ultra-High Contrast, Bright And Clear Dots, And It Is Easy To Read Even Small Fonts.
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
Features
- 0.96 inch,Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.09 Pounds
Warranty: NO
See On Amazon #6
Weewooday 5 Pieces 0.96 Inch OLED Module 12864 128x64 Driver IIC I2C Serial Self-Luminous Display Board Compatible with Arduino/Raspberry PI White
Asin: B09JWN8K99
Embedded Driver Ic: Communication: I2c/Iic Interface, Only Need 2 I/O Ports; Compatible With Mmdvm, Pi-Star, And It Is Compatible With Raspberry Pi.
About Fonts: No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software.
Self-Luminous Design: Needn't Backlight, The Display Can Self-Luminous; It Has High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.
Functional Usages: 0.96 Inch Oled Module For Showing Graphical And Textual Information Directly On Your Micro-Controller Projects; It Supports Many Chips: Compatible With Arduino Mega, Raspberry Pi, 51 Mcu, Stim 32, Etc.
Features
- Information: 128 x 64; View angle: more than 160 degree; Support voltage: 3.3V-5V DC; Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Functional usages: 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects; It supports many chips: compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc
- Embedded driver IC: Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star, and it is compatible with Raspberry pi
- Self-luminous design: needn't backlight, the display can self-luminous; It has high contrast, bright and crisp dots, even tiny fonts quite readable
- About fonts: no embedded fonts inside the OLED controller, user can create the fonts through the font generation software
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
Warranty: The brands or models we mentioned are only for expressing products adaptability explanation, not for trade mark using, our trade mark is Weewooday, kindly noted.
See On Amazon #7
MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Ar duino
Asin: B079BN2J8V | Model: 8541549353 | PartNumber: 8541549353 | Ean: 0702646045932 | UPC: 702646045932
The Display Performance Is Better Than The Traditional Lcd Display, Also Lower Consumption; Ssd 1306 Oled Display; I2c Oled Display, Iic (I2c Communications) Simplifies Connections.
We Have A Strong After-Sales Service Team: As Long As You Have Any Questions About The Product, We Will Resolve Your Issue Immediately If Received Your Email, Your Satisfactory Purchase Experience Is Our Greatest Hope! How To Email Us? Plz Click “Makerfocus” And Click “Ask A Question” To Email Us! Looking Forward To Your Consultation!.
Use With Ar Duino, Esp8266, Esp32, Stm32, Etc; 3.35V Power; Operating Temperature:-40 - 85 ℃.
128X32 Oled Display, No Need Backlight, Self-Illumination, Display Color: White. Plz Note: These I2c Oled Display Modules Come Without Pin Headers.
Features
- Product Manual: Please get the link from the product description below
- 128x32 OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Modules come without pin headers
- The display performance is better than the traditional LCD display, also lower consumption; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connections
- Use with Ar duino, ESP8266, ESP32, STM32, etc; 3.35v Power; Operating temperature:-40 - 85
- We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerFocus and click Ask a question to email us! Looking forward to your consultation!
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.50 x 2.76 inches | Weight: 0.02 Pounds
Warranty: No Warranty
See On Amazon #8
GeeekPi 2Pcs OLED Display Module I2C IIC 128X64 Pixel 0.96 Inch Display Module Yellow Blue Two-Color Display Compatible with Raspberry Pi Arduino 51 Series MCU STM32 R3 and Mega
Asin: B0B7RPCZ4Z
Support I2c Iic Communication Protocol,The Iic Address Can Be Changed,It Is Convenient To Use With Different Machines ..
Package Includes:2 X 0.96 Inch Oled Display Kits (Yellow Blue Two-Color), 8X Male To Femal Dupont Wire, 8X Female To Female Dupont Wire.
Pin Definitions: Gnd, Vcc, Scl, Sda;Pins: 4 Pins.
High Resoluton: 128*64 Pixels(Approx).
Features
- Fully compatible with Raspberry Pi, Arduino, 51 series, MSP430 Series, STM32/2, CSR IC, etc.
- High resoluton: 128*64 pixels(approx)
- Support I2c IIC communication Protocol,the IIC address can be changed,it is convenient to use with different machines .
- Pin Definitions: GND, VCC, SCL, SDA;Pins: 4 pins
- Package includes:2 x 0.96 inch OLED Display kits (Yellow Blue Two-Color), 8x Male to Femal Dupont Wire, 8x Female to Female Dupont Wire
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Weight: 0.07 pounds
Warranty: no
See On Amazon #9
DWEII 2.4" 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 DIY Electronic - White Light
Asin: B0B2R57SCJ | Ean: 0701715516403 | UPC: 701715516403
❃❃This Is A 2.42 Inch Oled Display Module Of 128X64 Resolution In Which The Emissive Electroluminescent Layer Is A Film Of Organic Compound That Emits Light In Response To An Electric Current.
❃❃Driver Ic: Ssd1309.
❃❃Diagonal Screen Size: 2.42 Inch.
❃❃Spi Communication Or I2c Communication Can Be Switched By Configuring Three Resistors R3 R4 R5.
Features
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current
- Diagonal Screen Size: 2.42 inch
- Driver IC: SSD1309
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #10
Weewooday 8 Pieces IIC/ I2C/ TWI LCD Serial Interface Adapter and LCD Module Display Backlight Compatible with Arduino R3 MEGA2560 (Blue,LCD 1602 16 x 2)
Asin: B08MPTND1V | Model: Weewooday-3275 | PartNumber: Weewooday-3275
Compatibility: 1602 Icd Display With I2c Serial Interface Is Compatible With For Arduino And Raspberry Pi; Working Voltage: 5V; To Come With A Potentiometer, Which Is Applied To Adjust Backlight And Contrast; How To Wire: Gnd—Gnd; Vcc—Vcc; Sda—A4; Scl—A5.
Display Function: 1602 Icd Display With I2c Serial Interface Can Be Applied To Display Real Time Clock, Temperature, Humidity And So On; (A Potentiometer Is Also Necessary To Adjust The Contrast; Working Voltage: Only 5V ).
Application: Lcd Module Is Applied To Display Letters, Characters, Numbers, Real Time Clock And Temperature.
Default Address: 0 X 27 For Pcf8574t Chip; 0 X 3F For Pcf8574at Chip; Please Kindly Check The Chip Of The I2c Interface; ( Please Remember To Download The I2c Library On Github Before Uploading The Code To The Control Board).
Features
- Components: blue LCD display with i2c serial interface backpack; LCD screen can display 2-lines x 16-characters; The i2c LCD adapter built-in industry standard equivalent LCD controller
- Default Address: 0 x 27 for PCF8574T chip; 0 x 3F for PCF8574AT chip; Please kindly check the chip of the i2c interface; ( Please remember to download the I2C library on GitHub before uploading the code to the control board)
- Compatibility: 1602 icd display with I2C serial interface is compatible with for Arduino and Raspberry pi; Working voltage: 5V; To come with a potentiometer, which is applied to adjust backlight and contrast; How to wire: GND GND; VCC VCC; SDA A4; SCL A5
- Application: LCD module is applied to display letters, characters, numbers, real time clock and temperature
- Display function: 1602 icd display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on; (A potentiometer is also necessary to adjust the contrast; Working Voltage: Only 5V )
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #11
Hosyond 5 Pcs 1.3 Inch IIC I2C OLED Display Module 128x64 Pixel SH1106 Screen Module Compatible with Arduino/Raspberry Pi (White)
Asin: B0C3L7N917 | Ean: 0732214748187 | UPC: 732214748187
Wide Voltage Power Supply (3V~5V), Compatible With 3.3V And 5V Logic Levels, No Need For Level Conversion Chips..
Compatible With R3 Board And Mega, Raspberry Pi, 51 Mcu, Stim 32 Etc. Provide Underlying Driver Technical Support(Contact Us For Instructions)..
Embedded Driver Ic: Sh1106. Using The Iic/I2c Bus, Only 2 Ios Are Needed To Light Up The Display..
128X64 Resolution, The Display Effect Is Clear And The Contrast Is High. The Viewing Angle Is Greater Than 160°. Even Small Fonts Are Easy To Read..
Features
- 1.3-inch OLED screen, self-luminous material, no backlight, ultra-low power consumption, normal display is only 0.06W. Blue display.
- 128x64 resolution, the display effect is clear and the contrast is high. The viewing angle is greater than 160 . Even small fonts are easy to read.
- Wide voltage power supply (3V~5V), compatible with 3.3V and 5V logic levels, no need for level conversion chips.
- Embedded driver IC: SH1106. Using the IIC/I2C bus, only 2 IOs are needed to light up the display.
- Compatible with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32 etc. Provide underlying driver technical support(Contact us for instructions).
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Warranty: NO
See On Amazon #12
HiLetgo 0.95" Inch 7 Pin Colorful 65K SPI OLED Display Module SSD1331 96 * 64 Resolution for Arduino 51 STM32
Asin: B0711RKXB5 | Model: 3-01-1401 | PartNumber: 3-01-1401
0.95 Inch Colorful Oled.
Easy To Set Up: Easy To Work With And Requires No Soldering For The Header Pins.
Draw Speed Is Responsive.
Resolution:96*64.
Features
- Main Driver:SSD1331
- Resolution:96*64
- 0.95 inch Colorful OLED
- Draw speed is responsive
- Easy to Set Up: Easy to work with and requires no soldering for the header pins
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V
Asin: B08CDN5PSJ | Model: Frienda-d'Affichage-02 | PartNumber: Frienda-d'Affichage-02
More Details: Use Compatible With Arduino, Esp8266, Stm32, Etc.; 3.35V Power; Operating Temperature: -40 - 85 Degree; Resolution: 128 X 32.
Product Manual: As Shown In The Instructions.
Good Compatibility: This I2c Oled Display Module Is Compatible With Raspberry Pi 4B/3B+/3B/2B/Zero, Compatible With Arduino, Also Compatible With Esp8266, Stm32, Etc..
Power-Saving Display: The I2c Oled Display Performs Better Than The Traditional Lcd Display And With Lower Consumption The Iic (I2c Communications) Simplifies Connections; Please Note That These I2c Oled Display Module Comes Without Pin Headers.
Features
- What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight
- Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers
- More details: use compatible with Arduino, ESP8266, STM32, etc.; 3.35v Power; Operating temperature: -40 - 85 degree; Resolution: 128 x 32
- Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, STM32, etc.
- Product manual: as shown in the instructions
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
See On Amazon #14
HiLetgo 0.91" IIC I2C Serial OLED LCD Display SSD1306 128x32 3.3V/5V AVR PIC for Arduino STM32
Asin: B01N0KIVUX | Model: 3-01-1259 | PartNumber: 3-01-1259
High Resolution Oled For Any Of Your Micro Controller Projects, 128X32 Pixels Gives You A Nice Sharp, Crisp Text Output..
The Display Can Run On 3.3V. It Is Legible, Even With 4 Lines Of Text. Highly Recommended For Projects That Require Some Form Of User Interface..
Use With Arduino, Esp8266, Esp32, Stm32, Etc. This Is A Really Good Way To Add A Very Compact Lcd To Your Project. No Need To Add Some Big Bulky Backlit Lcd..
The Display Performance Is Better Than The Traditional Lcd Display, It Uses The Very Common I2c Bus, And Runs On The Ssd1306 Display Driver..
Features
- OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Modules come without pin headers.
- The display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver.
- High resolution OLED for any of your micro controller projects, 128x32 pixels gives you a nice sharp, crisp text output.
- Use with Arduino, ESP8266, ESP32, STM32, etc. This is a really good way to add a very compact LCD to your project. No need to add some big bulky backlit LCD.
- The display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #15
2 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver 3.3V - 5V (White Light)
Asin: B08TLXYKS6
More Details: This I2c Lcd Display Is Compatible With Arduino, Esp8266, Stm32, Etc., 3.35V Power; Operating Temperature: -40 - 85 Degree Celsius; Resolution: 128 X 32.
Product Manual: As Shown In The Instructions.
Good Compatibility: This I2c Oled Display Module Is Compatible With Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, Compatible With Arduino, Also Compatible With Esp8266, Stm32, Etc..
Power-Saving Display: The I2c Oled Display Performs Better Than The Traditional Lcd Display And With Lower Consumption The Iic (I2c Communications) Simplifies Connections; Please Note That These I2c Oled Display Module Comes Without Pin Headers.
Features
- What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight
- Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers
- More details: this I2C LCD display is compatible with Arduino, ESP8266, STM32, etc., 3.35V power; Operating temperature: -40 - 85 degree Celsius; Resolution: 128 x 32
- Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with ESP8266, STM32, etc.
- Product manual: as shown in the instructions
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
See On Amazon #16
Teyleten Robot 0.96 inch LCD OLED Display Board Module 12864 128X64 IIC I2C SSD1306 Driver 4 Pins for Raspberry Pi Arduino(5pcs, White Light)
Asin: B0CN373JF4
Pin Definition: Vcc,Gnd,Scl, Sda.
Ultra-Low Power Consumption: Full Screen Lit 0.08W.
Voltage: 3V ~ 5V Dc.
There Is Also A Removable Transparent Film On Each Oled Glass Surface For Scratch Resistant Protection Until Use..
Features
- Pins has been soldered,comes in a small box to prevent it from being dropped during transportation
- There is also a removable transparent film on each OLED glass surface for scratch resistant protection until use.
- Pin Definition: VCC,GND,SCL, SDA
- Voltage: 3V ~ 5V DC
- Ultra-low power consumption: full screen lit 0.08W
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #17
Teyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Asin: B09LND6QJ1 | Ean: 9339036069134
Spi Communication Or I2c Communication Can Be Switched By Configuring Three Resistors R3 R4 R5.
For Iic Communication, It Is Necessary To Move The Resistor On R4 To R3, And R5 Is Soldered With 0 Ohm Resistor..
Features
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 2.80 x 1.71 inches
See On Amazon #18
Teyleten Robot 0.91 inch OLED LCD Display Module SSD1306 IIC 128x32 LCD OLED Screen 3.3V~5V 4PIN for Arduino White 5PCS
Asin: B08ZY4YBHL | Model: B58 | PartNumber: B58 | Ean: 6438014417493
Resolution: 128 X 32 Iic Interface Display.
Pin Description: Gnd: Power Ground Vcc: Power + (Dc 3.3 ~5V) Scl: Clock Line Sda: Data Line.
Driver Ic: Ssd1306.
Features
- OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
- Driver IC: SSD1306
- Resolution: 128 x 32 IIC interface Display
- Pin Description: GND: Power Ground VCC: Power + (DC 3.3 ~5v) SCL: Clock Line SDA: Data Line
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.59 x 1.48 x 0.47 inches
See On Amazon #19
Frienda 10 Pieces I2C OLED Display Module OLED Display Screen Driver IIC I2C Tabellone Seriale con Display Auto-Luminoso Compatible with Arduino/Raspberry PI
Asin: B08VNNCLHD | Model: Frienda-8546 | PartNumber: Frienda-8546
Driver And Communication: Embedded Driver Ic; Communication Is Iic/ I2c Interface, Only Needs 2 I/O Ports; Compatible With Mmdvm, Pi-Star, And Compatible With Raspberry Pi.
Create Fonts: There Are No Fonts Embedded In The Oled Controller, So Users Can Use The Font Generation Software To Create The Fonts.
Self-Luminous Design: The Oled Display Module Is Self-Luminous, So That No Backlight Is Required; It Features High Contrast, Bright And Crisp Dots, Which Is Convenient For You To Read Tiny Fonts.
Product Information: Resolution Is 128 X 64; View Angle Is More Than 160 Degrees; Supporting Voltage Is From 3.3V To 5V Dc; Power Consumption During Normal Operation Is 0.04W, Full Screen Lit Is 0.08W.
Features
- Compatibility: blue and yellow, 0.96 inch OLED module is designed to display graphic information and text information directly on your microcontroller project; Compatible with Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Product information: resolution is 128 x 64; View angle is more than 160 degrees; Supporting voltage is from 3.3V to 5V DC; Power consumption during normal operation is 0.04W, full screen lit is 0.08W
- Driver and communication: embedded driver IC; Communication is IIC/ I2C interface, only needs 2 I/O ports; Compatible with MMDVM, Pi-Star, and compatible with Raspberry pi
- Self-luminous design: the OLED display module is self-luminous, so that no backlight is required; It features high contrast, bright and crisp dots, which is convenient for you to read tiny fonts
- Create fonts: there are no fonts embedded in the OLED controller, so users can use the font generation software to create the fonts
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Warranty: 10 x OLED Display modules in 0.96 inches 128 x 64 yellow and blue
See On Amazon
Looking For Something Else?
Search