Eliminator Trolling Motor Prop Nut Replacement for MotorGuide X3 X5 XI3 XI5 (GFEL-MG-R-DP)
Asin: B08VD6R26N
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Stabilizes The Propeller By Providing A Larger Contact Point.
The Eliminator Prop Nut Is Built To Make Your Trolling Motor Perform Better, Longer And Quieter.
Designed To Lessen Prop Noise And Vibration, Stabilizes The Prop By Providing A Larger Contact Point.
Machined From 6061 Billet Aluminum Anodized Black Finish, Anti-Rust.
Features
- Eliminator trolling motor prop nut replacement for MotorGuide X3 X5 XI3 XI5 (GFEL-MG-R-DP)
- Machined from 6061 billet aluminum anodized black finish, anti-rust
- Stabilizes the propeller by providing a larger contact point
- Designed to lessen prop noise and vibration, stabilizes the prop by providing a larger contact point
- The eliminator prop nut is built to make your trolling motor perform better, longer and quieter
- See more on Amazon...
Brand: labwork | Manufacturer: labwork
See On Amazon Similar To Eliminator Trolling Motor Prop Nut
#1
Newport NV-Series 55lb Thrust Saltwater Transom Mounted Trolling Electric Trolling Motor w/ LED Battery Indicator & 30" Shaft (23M1000203)
Asin: B00EYST1L8 | Model: 23M1000203 | PartNumber: 23M1000203 | Ean: 0744288455748, 0700987987577 | UPC: 744288455748, 700987987577
Speed: This Motor Has 8 Speeds, 5 Forward And 3 Reverse. The Motor Is Designed For Trolling, So The Top Speed Of This Motor Is About 4Mph, But Depends On Your Boat Shape, Weight, Water, Wind, And Other Factors. Our 3 Blade Propeller Gives The Motor Great Low End Torque To Get The Boat Moving.
Battery: The Nv 55Lb Motor Requires One (1) 12V Lead-Acid Deep Cycle Or Lithium Deep Cycle Battery (Battery Not Included), 50Ah Recommended. The Motor Also Includes A 50Amp Circuit Breaker Which Is Recommended At All Times To Protect From Battery Voltage Surges. Max Amp Draw: 52A.
Features: This Motor Features A 30 Inch Shaft, A 5 Led Battery Meter, A 6 Inch Telescoping Tiller Handle, And 3 Blade Propeller. The Mount Angle, Height, And Direction Can All Be Adjusted And Locked Into Place When Needed.
Features
- Efficient Power: 55Lb Thrust - This 12V Electric Trolling Motor Provides Excellent Power And Efficiency For Any Boater. The High Quality Build Allows The Motor To Run All Day Long Without Overheating, Or Making Noise To Spook Fish
- Features: This Motor Features A 30 Inch Shaft, A 5 Led Battery Meter, A 6 Inch Telescoping Tiller Handle, And 3 Blade Propeller. The Mount Angle, Height, And Direction Can All Be Adjusted And Locked Into Place When Needed
- Speed: This Motor Has 8 Speeds, 5 Forward And 3 Reverse. The Motor Is Designed For Trolling, So The Top Speed Of This Motor Is About 4Mph, But Depends On Your Boat Shape, Weight, Water, Wind, And Other Factors. Our 3 Blade Propeller Gives The Motor Great Low End Torque To Get The Boat Moving
- Battery: The Nv 55Lb Motor Requires One (1) 12V Lead-Acid Deep Cycle Or Lithium Deep Cycle Battery (Battery Not Included), 50Ah Recommended. The Motor Also Includes A 50Amp Circuit Breaker Which Is Recommended At All Times To Protect From Battery Voltage Surges. Max Amp Draw: 52A
- See more on Amazon...
Brand: Newport | Manufacturer: Newport Vessels
Dimensions: 7.00 x 47.00 x 21.00 inches | Weight: 23.20 pounds
Warranty: 2 year manufacturer
See On Amazon #2
Taisioner Double Mount Clamp Bracket Monitor Magic Socket Arm for Desk Photo Studio Light Stand, Photography Reflector, Flag Holder Mount, Cross Bars, Umbrella, Pole Stick Shoot Accessories Tools
Asin: B09YH3Z5QY
【Suitable Clip Size】 It Could Be Clipped On The 0.67"-1.49" Of Rod / Stick / Handle / Grip / Pole / Tube / Hooks / Shelves / Plate / Gun / Desk / Chair / Tripod / Railing / Photo Studio Indoor & Outdoor Etc..
【The Clamp Supporting Tips】 It Could Be Quickly Conveniently To Attach And Detach From Object, The Maximum Load Weight Is 5 Lb (2.3Kg) Or Even More,You Need Pay Attention To Consider The Balance Of Bracing Objects..
【Instruction】 The Spring On Composite Double Socket Arm Play A Part Of Assisting Which Help The Ball Head Clamp To Fix. First Press The Side Of Spring And Put A Ball Head Mount Into The Other Side Of Composite Double Socket Arm,Second Put Another Ball Head Mount Into The Composite Double Socket Arm,Finally Adjust And Tighten It..
【Stable And Secure Ball Head】 The Overall Make Of Alloy And Reinforced Plastic Composite Material So It’S Very Hard And Durable. And The Double Clip Include Non-Slip Rubber In Order To Reduce Scratches And Keep Balance..
【Clamped Items】 Work For Most Kind Of Photography Shoot Accessory Or Tools Like Photo Studio Light Stand , Monitor , Led Flash Lamp , Photography Reflector , Photo Boom Stand , Cross Bars , Selfie Stick , Tripod , Equipment , Umbrella And So On..
Features
- Double Mounts Clamps Double magic socket arm connect with double clamp mount design which support to adjust all rotation of 360 degree as per you need,especially on photography shooting and video recording when you need extra accessories or tool to assist.
- Clamped Items Work for most kind of photography shoot accessory or tools like photo studio light stand , monitor , led flash lamp , photography reflector , photo boom stand , cross bars , selfie stick , tripod , equipment , umbrella and so on.
- Suitable Clip Size It could be clipped on the 0.67-1.49 of rod / stick / handle / grip / pole / tube / hooks / shelves / plate / gun / desk / chair / tripod / railing / photo studio indoor & outdoor etc.
- Stable and Secure Ball Head The overall make of alloy and reinforced plastic composite material so it s very hard and durable. And the double clip include non-slip rubber in order to reduce scratches and keep balance.
- The Clamp Supporting Tips It could be quickly conveniently to attach and detach from object, the maximum load weight is 5 lb (2.3KG) or even more,you need pay attention to consider the balance of bracing objects.
- Instruction The spring on Composite Double Socket Arm play a part of assisting which help the ball head clamp to fix. First press the side of spring and put a ball head mount into the other side of Composite Double Socket Arm,second put another ball head mount into the Composite Double Socket Arm,finally adjust and tighten it.
- See more on Amazon...
Brand: Taisioner | Manufacturer: Taisioner
Dimensions: 8.86 x 3.15 x 1.37 Inches | Weight: 0.73 pounds
See On Amazon #3
Minn Kota 1352270M Endura 30 lb. Thrust, 30" Shaft, Battery Meter
Asin: B0077OMFKK | Model: 1352270M | PartNumber: 1352270M | Ean: 0029402036837 | UPC: 029402036837
5 Fwd/3 Rev Speed Settings: Five Speed Settings For Forward And Three Speed Settings For Reverse..
Cool, Quiet Power: Every Minn Kota Lower Unit Runs Cool To Extend Trolling Motor Life, And Stays Quiet..
Indestructible Composite Shaft — Guaranteed For Life: At The Core Of Your Minn Kota Trolling Motor Is An Indestructible Composite Shaft. It's A Minn Kota Exclusive, And We Guarantee It For Life..
Push-To-Test Battery Meter: Press A Button On The Trolling Motor Head To Get An Instant Status Of Battery Life You Have Left..
Power Prop: This Prop Delivers Extra Power To Push Through Heavy Vegetation. Includes Prop Pin, Nut And Washer..
Telescoping Tiller: Get Easy, Comfortable, Intuitive Operation Of Your Trolling Motor With The Six-Inch Telescoping Tiller..
Features
- Lever Lock Bracket: This solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
- Telescoping Tiller: Get easy, comfortable, intuitive operation of your trolling motor with the six-inch telescoping tiller.
- 5 Fwd/3 Rev Speed Settings: Five speed settings for forward and three speed settings for reverse.
- Power Prop: This prop delivers extra power to push through heavy vegetation. Includes prop pin, nut and washer.
- Indestructible Composite Shaft Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.
- Push-to-Test Battery Meter: Press a button on the trolling motor head to get an instant status of battery life you have left.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
- See more on Amazon...
First Available: 01/01/2012
Brand: Minn Kota | Manufacturer: Minn Kota
Weight: 17.06 pounds
Warranty: Two-Year Warranty
See On Amazon #4
Minn Kota 1865017 Prop - Weedless Wedge 2 / MKP-32
Asin: B000E8BJHQ | Model: 1865017 | PartNumber: 1865017
Ean: 0724845015820, 0824365010203, 6348288549946, 0066510935423, 4121344581324, 0029402022298, 0523161291631
UPC: 029402022298, 066510935423, 724845015820, 523161291631, 824365010203
Prop Nut Thread: 5/16"-24.
For Use With 1.06" Prop/ Drive Pin.
Features
- Fits 3-5/8" Lower Unit Diameter
- For Use With 1.06 Prop/ Drive Pin
- Prop Nut Thread: 5/16-24
- See more on Amazon...
First Available: 01/01/2005
Brand: Minn Kota | Manufacturer: Johnson Outdoors
Dimensions: 5.85 x 2.45 x 12.70 inches | Weight: 2.75 Pounds
Warranty: One-Year Warranty
See On Amazon #5
Trolling Motor Part Cam Lock Depth Collar Assembly 2991521 Hand Control Depth Collar for Minn Kota Freshwater & Saltwater Motors
Asin: B0CB7MGLBP | Model: for hand control models | PartNumber: for hand control models
【Reliable Performance】Allow User To Regulate The Depth Of Trolling Motor On The Front Of Boat. Finding Suitable Depth, Lock The Collar In Tight To Keep Motor Right. It Does Not Slip Or Allow Motor To Slide Down The Shaft. Enhance Performance And Functionality Of Trolling Motors..
【Unique Feature】Equipped With A Reliable Locking Mechanism. Prevent Unintentional Depth Changes Caused By Boat Vibrations, Water Disturbances, Or Accidental Bumps, Guaranteeing Stability Of Motor..
【Precise Control】Allow Anglers To Adjust The Operating Depth Of Trolling Motors. By Modifying Collar's Placement, Achieve Precise Depth Adjustments. Keep Flexible To Fine-Tune The Motor's Depth, Effectively Target Fish In Changing Fishing Scenarios..
【High Quality】Made Of Premium Plastic And Steel. Plastic Provides A Lightweight And Durable Design. Ensure Wear And Corrosion Resistance, Withstanding Rigors Of Fishing. Stainless Steel Ensures Structural Support And Stability, Firmly Attached The Collar To Trolling Motor..
Features
- Great Compatibility :2991521 Hand Control Depth Collar designed for Minn Kota freshwater and saltwater motors, both transom mount motors and bow mount hand control motors. Also fitment for shafts that have a diameter of 1-1/8 .
- High Quality Made of premium plastic and steel. Plastic provides a lightweight and durable design. Ensure wear and corrosion resistance, withstanding rigors of fishing. Stainless steel ensures structural support and stability, firmly attached the collar to trolling motor.
- Reliable Performance Allow user to regulate the depth of trolling motor on the front of boat. Finding suitable depth, lock the collar in tight to keep motor right. It does not slip or allow motor to slide down the shaft. Enhance performance and functionality of trolling motors.
- Precise Control Allow anglers to adjust the operating depth of trolling motors. By modifying collar's placement, achieve precise depth adjustments. Keep flexible to fine-tune the motor's depth, effectively target fish in changing fishing scenarios.
- Unique Feature Equipped with a reliable locking mechanism. Prevent unintentional depth changes caused by boat vibrations, water disturbances, or accidental bumps, guaranteeing stability of motor.
- See more on Amazon...
Brand: Bonbo | Manufacturer: Bonbo
Dimensions: 1.26 x 2.52 x 1.65 inches
See On Amazon #6
GRONGU Motor Prop Pins 2092600 Compatible with Minn Kota Motors Fits for Minnkota Shear pin MKP-2 MKP-3 MKP-6 MKP-7 MKP-25 MKP-37 (4 Pack)
Asin: B0BGGLZMSN | Ean: 0721398768593 | UPC: 721398768593
【Easy Installation】Motor Prop Shear Pins Easy To Install, Easy Installation Without Additional Tools. Please Wear Gloves To Protect Your Hands During Installation..
【After-Sales Service】The Package Includes 4 Pieces Prop Drive Pin, And The Rest Can Be Used As A Spare, Saving You Money! If You Have Any Questions About The Trolling Motor Prop Pin, You Can Send Us An Email At Any Time, And We Will Reply You In Time..
【Applicable Models】Trolling Motor Prop Pins 2092600 Fit For Minn Kota 55 Lb, 55 Co Pilot, 45 Lb Riptide, 65 Lb Minnkota Edge, 50 Lb C2 Endura, 65 Lb Minn Kota; Motor Drive Pin Fits For Minnkota 45 Lb, 50 Lb, 55 Lb, 65 Lb. (Note : Trolling Motor Replacement Part Does Not Fit Mkp-2 Endurance Motor.).
【High Quality】Replacement For Minn Kota Shear Pin Is Stainless Steel Prop Pins, Not Easy To Damage, Durable. Perfect For Restoring Your Prop Motor Drive..
Features
- Compatibility Our shear pin 2092600 compatible with Minn Kota MKP-2,MKP-3,MKP-6,MKP-7,MKP-25,MKP-37.
- High Quality Replacement for minn kota shear pin is stainless steel prop Pins, not easy to damage, durable. Perfect for restoring your prop motor drive.
- Easy Installation Motor prop shear pins easy to install, easy installation without additional tools. Please wear gloves to protect your hands during installation.
- Applicable Models Trolling motor prop pins 2092600 fit for Minn Kota 55 lb, 55 co pilot, 45 lb riptide, 65 lb minnkota edge, 50 lb c2 endura, 65 lb Minn Kota; Motor drive pin fits for Minnkota 45 lb, 50 lb, 55 lb, 65 lb. (Note : Trolling motor replacement part does not fit MKP-2 Endurance motor.)
- After-Sales Service The package includes 4 pieces prop drive pin, and the rest can be used as a spare, saving you money! If you have any questions about the trolling motor prop pin, you can send us an email at any time, and we will reply you in time.
- See more on Amazon...
Brand: GRONGU | Manufacturer: GRONGU
See On Amazon #7
Minn Kota 1862060 Stabilizer Kit/MKA-60
Asin: B0C8WYNFBG | Model: 1862060 | PartNumber: 1862060 | Ean: 0029402051397 | UPC: 029402051397
Folds Down When Not In Use.
Multi-Position Strap Adjusts To Accommodate All Shaft Sizes.
Includes Stainless Steel Mounting Hardware.
Easily Removeable, Leaves Only A Low Profile Base.
Stabilizer Shaft Can Be Cut To Fit.
Multiple Mounting Orientations To Fit Your Boat Configuration.
Compatible With Quest Series Rt Instinct, Ulterra, Rt Terrova, Terrova And Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide St, Powerdrive, Riptide Powerdrive, Powerdrive V2, Riptide Sp, And Powerdrive Pontoon.
Absorb Vibrations To Protect Motor Shaft.
Features
- Reduces motor bounce in the stowed position
- Absorb vibrations to protect motor shaft
- Folds down when not in use
- Multiple mounting orientations to fit your boat configuration
- Easily removeable, leaves only a low profile base
- Stabilizer shaft can be cut to fit
- Multi-position strap adjusts to accommodate all shaft sizes
- Includes Stainless steel mounting hardware
- Compatible with QUEST series RT Instinct, Ulterra, RT Terrova, Terrova and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon
- See more on Amazon...
First Available: 06/26/2023
Brand: Minn Kota | Manufacturer: Minn Kota
Weight: 3.00 Pounds
Warranty: One-Year Warranty
See On Amazon #8
Bullnose Rudder clamp on boat rudder fits a 1.125" transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured
Asin: B01FRLDP26 | Model: 868527000206A | PartNumber: 868527000206A | Ean: 0868527000206, 0744288437614 | UPC: 744288437614, 868527000206
Essential - In Most Cases It Helps Hold A True Course At Both A Slow And High Trolling Speeds. Customers Have Also Said, “It Prevents The Boat From Spinning As Much When The Motor Is Off”. Most Tiny Boats Will Benefit From Having Some Kind Of A Rudder Set Up In The Back Vs Not Having A Rudder At All. Only Takes A Few Minutes To Install And You Are Ready To Go..
Bow Mount - Fits The Minn Kota, Edge, Maxxum, And Fortrex. The Bow Mount Motor Must Be A Hand Cable Pull, Not Self Deploy. Self Deploy Will Not Work Because The System Requires The Shaft To Slide Up And Down Right Where The Rudder Needs To Be Attached. However, A Hand Cable Pull Will Allow You To Carefully Bring The Motor Up Out Of The Water On The Motor Mount. Your Bow Mount Setup Needs To Have 1' Of Shaft Sticking Out From The End Of The Platform Allowing Enough Space To Attach The Rudder..
Quality - Manufactured In The Usa With High Quality Parts & Material To Help Ensure You Have A Stress-Free Fishing Experience. It Is Manufactured From Impact Plastic For Durability And Comes With Stainless Steel Screws. It Is Built Strong So You Don't Have To Worry About It Coming Loose, Allowing You To Focus More On Fishing. Patent No. D712,341S.
Fit - The Bullnose Rudder Is A Boat Rudder That Fits 1 1/8" (1.125") Transom Mount Trolling Motors. Please Note, It Will Not Work On A Self Deploy Bow Mount Trolling Motor. It Measures 10.5" High X 4.75" Wide And Fits A 1 1/8" Shaft Diameter. It's Most Commonly Used For "But Not Limited To" Minn Kota Trolling Motor, Motorguide Trolling Motors, Newport Vessel Trolling Motor, Etc. Common Tiny Boats Used Are, Inflatable Pontoon, Pelican Bass Raider 10E, Fishing Kayak, Canoes, Jon Boats, And More..
Features
- PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S
- FIT - The Bullnose Rudder is a boat rudder that fits 1 1/8 (1.125) transom mount trolling motors. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5 high x 4.75 wide and fits a 1 1/8 shaft diameter. It's most commonly used for but not limited to minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.
- ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, it prevents the boat from spinning as much when the motor is off . Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.
- QUALITY - Manufactured in the USA with high quality parts & material to help ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws. It is built strong so you don't have to worry about it coming loose, allowing you to focus more on fishing. Patent no. D712,341S
- BOW MOUNT - Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount. Your bow mount setup needs to have 1' of shaft sticking out from the end of the platform allowing enough space to attach the rudder.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products LLC
Dimensions: 1.50 x 10.50 x 6.75 inches | Weight: 0.54 pounds
See On Amazon #9
NyVoozy Rudder Clamp on Boat Rudder Fits Most 24 to 55" Trolling Motors, Kayak Rudder Kit Designed for Kayak, Canoe, Angling Boat, etc, Electric Motors Rudder Clamp Widely Use for Canoe, Jon boat, etc
Asin: B09N9G36J8 | Ean: 0767587303916 | UPC: 767587303916
Premium Material-The Body Of Our Trolling Motor Accessories Is Made From Pa66gf30 Which Is A New And Premium Material, It Can Last Long Time. And The Screws Are Made From Su304 Which Is One Kind Of Anti-Rust And Resistant To Hydrochloric Acid Corrosion Material, So You Could Use It In The Seawater..
Easy Use-It Can Be Used When It Is Installed In The Boat Trolling Motors, And It Is Easy To Operate Without Any Operation Skills. Because The Rudder Accessories Let You Keep You On The Right Way And Let You Reduce Wind Resistance, So Your Trolling Motor Battery Lasted Longer..
Easy Install-Very Easy To Install, With Screws, You Could Install Our Trolling Motor Mount To Trolling Motor Only A Few Minutes..
Widely Use For-Our Kayak Rudder Kit Measures 10.5" High X 4.75" Wide And Suitable For A 23-32Mm" Shaft Diameter Which Is Boat Rudder Clamp Compatible With Most 24-55Lb Transom Mount Trolling Motors. It's Commonly Used For Motorguide Trolling Motors, Minn Kota Trolling Motor, Newport Vessel Trolling Motor, Etc. Designed For Kayak, Canoe, Seayak, Angling Boat, Etc..
Features
- OBVIOUSLY IMPROVED-Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don't worry rudder out of control any more.
- WIDELY USE FOR-Our kayak rudder kit measures 10.5 high x 4.75 wide and suitable for a 23-32MM shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It's commonly used for motorguide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc.
- PREMIUM MATERIAL-The body of our trolling motor accessories is made from PA66GF30 which is a new and premium material, it can last long time. And the screws are made from SU304 which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater.
- EASY INSTALL-Very easy to install, with screws, you could install our trolling motor mount to trolling motor only a few minutes.
- EASY USE-It can be used when it is installed in the boat trolling motors, and it is easy to operate without any operation skills. Because the rudder accessories let you keep you on the right way and let you reduce wind resistance, so your trolling motor battery lasted longer.
- See more on Amazon...
Brand: NyVoozy | Manufacturer: NyVoozy
See On Amazon #10
Sierra International 18-3702 Marine Prop Nut Kit for Mercury/Mariner Outboard Motor
Asin: B00144ANBW | Model: SR18.3702 | PartNumber: SR18.3702 | Ean: 0030999256201 | UPC: 030999256201
Fit Specific, Check Model Numbers And Part Numbers To Ensure Proper Fit.
Switch Assembly.
Features
- SHURFLO Model 4008 Repair Kit
- Switch assembly
- Fit specific, check model numbers and part numbers to ensure proper fit
- See more on Amazon...
Brand: Sierra | Manufacturer: Sierra
Dimensions: 0.39 x 0.39 x 0.39 inches | Weight: 0.10 pounds
Warranty: No
See On Amazon #11
Minn Kota MKP-32 Weedless Wedge 2 Replacement Prop
Asin: B012NYD6Q0 | Ean: 0029402022298 | UPC: 029402022298
Swept-Back & Flared Blades.
Takes Prop Nut Kit "A".
Fits 3-5/8" Motor Diameters.
100% Fully-Weedless Prop.
Features
- Weedless Wedge 2 Prop #2091160, #1865017
- 100% Fully-weedless Prop
- Swept-back & Flared Blades
- Fits 3-5/8 Motor Diameters
- Takes Prop Nut Kit A
- See more on Amazon...
Brand: Minn Kota
Dimensions: 3.00 x 12.00 x 6.00 Inches
See On Amazon #12
Eliminator Trolling Motor Prop Nut Aluminum For MinnKota 35-70 lb Models (GFEL-MKS-BK-DP)
Asin: B08867TSWP | Ean: 0641197080545 | UPC: 641197080545
Nice Design -- Built-In Cooling Ports Reduce The Operating Temperature For Longer Battery And Trolling Motor Life..
Top Quality -- Manufactured From 6061 Billet Aluminum. Anodized Finish For Corrosion-Resistant. Using Top Of The Line Machining And Measuring Equipment To Ensure Each Part Is Manufactured To Oem Quality Standards And Specifications..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Asked Money Back Guarantee With 12 Months Warranty. No Worry About Buying!.
Easy Installation -- No Tools Needed. 1. Remove The Existing Prop Nut And Washer, 2. Hand-Tighten The Eliminator Till It’S Firmly Pressed Against The Face Of The Prop..
Function -- Reduce Prop Noise And Vibration. Design With A Wider Contact Area To Stabilizes The Propeller. Install This Eliminator Prop Nut Will Help Your Trolling Motor Perform Quieter, Better And Longer..
Features
- APPLICATION -- Suitable for MinnKota 35-70 lb models. Replace # GFEL-MKS-BK-DP. ( NOTE: For Minn Kota Maxxum and for Terrova trolling motors will require a for Weedless Wedge 2 or 3 prop to use our Eliminator. )
- FUNCTION -- Reduce prop noise and vibration. Design with a wider contact area to stabilizes the propeller. Install this Eliminator Prop Nut will help your trolling motor perform quieter, better and longer.
- NICE DESIGN -- Built-in cooling ports reduce the operating temperature for longer battery and trolling motor life.
- EASY INSTALLATION -- No tools needed. 1. Remove the existing prop nut and washer, 2. Hand-tighten the Eliminator till it s firmly pressed against the face of the prop.
- TOP QUALITY -- Manufactured from 6061 Billet Aluminum. Anodized finish for Corrosion-Resistant. Using top of the line machining and measuring equipment to ensure each part is manufactured to OEM quality standards and specifications.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #13
MotorGuide Propeller 3 Blade Machete Gray, 3.5"
Asin: B000KORMX4 | Model: 3005.0028 | PartNumber: 3005.0028 | Ean: 0089287102713, 0066510909684 | UPC: 066510909684, 089287102713
Performance-Tuned, Engineered To Enhance Motor’S Performance.
Durable 3-Blade Prop With 3.5-Inch Hub.
Designed With Input Of Mercury Propeller Engineers.
Operates Quietly.
Features
- Delivers the ultimate shallow-water performance
- Operates quietly
- Performance-tuned, engineered to enhance motor s performance
- Designed with input of Mercury Propeller engineers
- Durable 3-blade prop with 3.5-inch hub
- See more on Amazon...
First Available: 08/21/2010
Brand: MotorGuide | Manufacturer: MotorGuide
Dimensions: 2.00 x 11.00 x 9.00 inches | Weight: 0.10 pounds
See On Amazon #14
Newport X-Series 55lb Thrust Transom Mounted Saltwater Electric Trolling Motor w/LED Battery Indicator (36" Shaft)
Asin: B00VYP3QWO | Model: 23M1000306 | PartNumber: 23M1000306 | Ean: 0702685990866 | UPC: 702685990866
Speed: This Motor Has 8 Speeds, 5 Forward And 3 Reverse. The Motor Is Designed For Trolling, So The Top Speed Of This Motor Is About 4Mph, But Depends On Your Boat Shape, Weight, Water, Wind, And Other Factors. Our 3 Blade Propeller Gives The Motor Great Low End Torque To Get The Boat Moving..
Usa Service: Newport Is Based In California With A Full In-House Customer Service Team (M-F 9Am-5Pm Pst). Buy In Confidence.
Battery: The 55Lb X Series Motor Requires One (1) 12V Lead-Acid Deep Cycle Or Lithium Deep Cycle Battery (Battery Not Included), 50Ah Recommended. The Motor Also Includes A 50Amp Circuit Breaker Which Is Recommended At All Times To Protect From Battery Voltage Surges. Max Amp Draw: 52A.
Features: This Motor Features A 36 Inch Fiberglass Shaft, A 10 Led Battery Meter, A 6 Inch Telescoping Tiller Handle, 30 Degree Adjustable Head, And 3 Blade Propeller. The Tiller Angle, As Well As Mount, Height, Angle, And Direction Can All Be Adjusted And Locked Into Place When Needed..
Features
- EFFICIENT POWER: 55lb Thrust - this 12v electric trolling motor provides excellent power and efficiency for any boater. High quality components allow the motor to run all day long without overheating, or making noise to spook fish.
- FEATURES: This motor features a 36 inch fiberglass shaft, a 10 LED battery meter, a 6 inch telescoping tiller handle, 30 degree adjustable head, and 3 blade propeller. The tiller angle, as well as mount, height, angle, and direction can all be adjusted and locked into place when needed.
- SPEED: This motor has 8 speeds, 5 forward and 3 reverse. The motor is designed for trolling, so the top speed of this motor is about 4mph, but depends on your boat shape, weight, water, wind, and other factors. Our 3 Blade Propeller gives the motor great low end torque to get the boat moving.
- BATTERY: The 55lb X Series motor requires one (1) 12V Lead-Acid Deep Cycle or Lithium Deep Cycle battery (battery not included), 50ah recommended. The motor also includes a 50amp circuit breaker which is recommended at all times to protect from battery voltage surges. Max Amp Draw: 52A
- USA SERVICE: Newport is based in California with a full in-house customer service team (M-F 9am-5pm PST). BUY IN CONFIDENCE
- See more on Amazon...
Brand: Newport | Manufacturer: Torero Imports LLC
Dimensions: 42.00 x 18.00 x 5.00 Inches | Weight: 23.00 pounds
Warranty: 2 Year Limited Warranty
See On Amazon #15
Newport Replacement Trolling Motor Prop for 55lb, 62lb, 86lb Motors
Asin: B01H42PDYO | Model: 23A1000098 | PartNumber: 23A1000098 | Ean: 0603803715586 | UPC: 603803715586
Comes With The Nut Kit: Washer, Screw Cap, Pin, And Spanner.
Benefits: Increased Thrust With 3 Blades Resulting In Higher Speeds.
Diameter: 10.10 Inches.
3 Blade Propeller - Designed For The 55Lb, 62Lb, & 86Lb Thrust Newport Electric Trolling Motors (All Series).
Features
- Replacement for Newport Brand trolling motor only
- 3 Blade Propeller - designed for the 55lb, 62lb, & 86lb thrust Newport Electric trolling motors (all series)
- Comes with the nut kit: washer, screw cap, pin, and spanner
- Diameter: 10.10 inches
- Benefits: increased thrust with 3 blades resulting in higher speeds
- See more on Amazon...
Brand: Newport | Manufacturer: Torero Imports LLC
Warranty: 1 Year Warranty
See On Amazon #16
MotorGuide 940200060 X3 Freshwater Bow Mount Trolling Motor Cable Steer, Foot-Control 45-Inch Shaft, 45-Pound Peak Thrust
Asin: B00FPQPGAI | Model: 940200060 | PartNumber: 940200060 | Ean: 0520893355921, 0400265013041, 0089287106834 | UPC: 400265013041, 520893355921, 089287106834
5 Speed With Pull/Pull Smooth Responsive Steering Control.
Mounting Bracket Built With Aircraft-Grade Extruded Aluminum.
Corrosion Resistant Shaft.
45" Composite Shaft.
Features
- 45 pounds peak thrust rating with 12-volt power
- 45 composite shaft
- 5 speed with pull/pull smooth responsive steering control
- Corrosion Resistant Shaft
- Mounting bracket built with aircraft-grade extruded aluminum
- See more on Amazon...
First Available: 09/13/2018
Brand: MotorGuide | Manufacturer: MotorGuide
Dimensions: 8.00 x 57.00 x 22.00 inches | Weight: 46.00 pounds
See On Amazon #17
Motor Prop Shear Pins 2092600 Compatible with Minn Kota Trolling Motors Fits for Minnkota Shear pin MKP-2 MKP-3 MKP-6 MKP-7 MKP-25 MKP-37
Asin: B0BWHY7RPN | Ean: 0767738566535 | UPC: 767738566535
Motor Prop Shear Pins Easy To Install,Easy Installation Without Additional Tools. Please Wear Gloves To Protect Your Hands During Installation. In The Package: 4 Pack Of Stainless Steel Prop Drive Pins..
Replacing Broken Shear Pin On Your Minkota Thrust Motor. Back To Fishing! It's A Good Thing You Have A Spare Pins In Your Boat..
Trolling Motor Prop Pins 2092600 Fit Minn Kota 45 Lb, 50 Lb, 55 Lb, 65 Lb. Compatible With Terrova Riptide, Newport Vessels, Endura, Edge And Other Series. (Note:Does Not Fit Mkp-2 Endurance Motor.).
Our Motor Drive Pin 2092600 Is Stainless Steel Prop Pins,Not Easy To Damage, Durable. Perfect For Restoring Your Prop Motor Drive. Replacement For All Minn Kota Trolling Motors..
Features
- Our shear pins 2092600 compatible with Minn Kota MKP-2,MKP-3,MKP-6,MKP-7,MKP-25,MKP-37. Approximate measurement: 1" x 1/8".
- Our motor drive pin 2092600 is stainless steel prop Pins,not easy to damage, durable. Perfect for restoring your prop motor drive. Replacement For All Minn Kota Trolling Motors.
- Motor prop shear pins easy to install,easy installation without additional tools. Please wear gloves to protect your hands during installation. In the package: 4 Pack of Stainless Steel Prop Drive Pins.
- Trolling motor prop pins 2092600 fit Minn Kota 45 lb, 50 lb, 55 lb, 65 lb. Compatible with Terrova Riptide, Newport Vessels, Endura, Edge and other series. (Note:Does not fit MKP-2 Endurance motor.)
- Replacing broken shear pin on your Minkota thrust motor. Back to fishing! It's a good thing you have a spare pins in your boat.
- See more on Amazon...
Brand: Spurick | Manufacturer: Spurick Motor Prop Pins
Warranty: 2 Year
See On Amazon #18
VEVOR Electric Trolling Motor 55lb Thrust Transom Mounted 24-Volt Boat Motor Variable Speed 10 LED Indicator for Kayak, Small Fishing Boats (30" Shaft)
Asin: B0C1YQVRNW | Model: Electric Trolling Motor 55lb Thrust | PartNumber: Electric Trolling Motor 55lb Thrust | Ean: 0197988463641, 0840349935195 | UPC: 840349935195, 197988463641
【Upgraded Design】Vevor Boat Motor Features A 30-Inch Stainless Steel Shaft, Copper Motor And Three-Bladed Propeller, Which Can Enhance Efficiency And Service Life, Whatever Sailing On Saltwater Or Freshwater. Three Sharp Blades Give The Motor Great Low-End Torque To Get The Boat Moving. Suitable For Small Fishing Boats, Kayaks, Inflatable Boats, Canoes..
【10 Led Battery Indicator】Make It Easy To Check Your Battery Status. When The Battery Level Drops Below 20%, An Audible Notification Alerts You To Charge The Battery. With This Feature, You Can Quickly Get Back To Fishing In No Time! (Note: Battery Not Included).
【Warm Note】This Trolling Motor Requires One (1) 24V Or Two (2) 12V Connected In Series Lead-Acid Deep Cycle Or Lithium Deep Cycle Battery For Operation. ≥60A Recommended. Battery Not Included, Need Be Purchased Separately..
【Adjustable Depth & Angle】You Can Easily Adjust The Shaft Angle By Press The Button To Fit Different Sailing Conditions According To Your Fishing Demands. Also, You Can Adjust The Depth Of The Motor In The Water With A Knob For Better Fishing..
【Variable Speed & Adjustable Handle】More Precise Control Of The Boat's Moving Speed At Your Will Up To 1700Rpm. The Up And Down 12.4" Adjustable Handle Help Navigate Through Water And Weeds. The Handle Angle, As Well As Mount, Height, Angle, And Direction Can All Be Adjusted And Locked Into Place When Needed..
Features
- Powerful Motor This 55lb thrust 24V electric trolling motor provides excellent power and efficiency for small to medium boats. High quality components allow the motor to run all day long without overheating or disturb your fishing experience.
- Variable Speed & Adjustable Handle More precise control of the boat's moving speed at your will up to 1700RPM. The up and down 12.4 adjustable handle help navigate through water and weeds. The handle angle, as well as mount, height, angle, and direction can all be adjusted and locked into place when needed.
- Upgraded Design VEVOR boat motor features a 30-inch stainless steel shaft, copper motor and three-bladed propeller, which can enhance efficiency and service life, whatever sailing on saltwater or freshwater. Three sharp blades give the motor great low-end torque to get the boat moving. Suitable for small fishing boats, kayaks, inflatable boats, canoes.
- Adjustable Depth & Angle You can easily adjust the shaft angle by press the button to fit different sailing conditions according to your fishing demands. Also, you can adjust the depth of the motor in the water with a knob for better fishing.
- 10 LED Battery Indicator Make it easy to check your battery status. When the battery level drops below 20%, an audible notification alerts you to charge the battery. With this feature, you can quickly get back to fishing in no time! (Note: Battery not included)
- Warm Note This trolling motor requires one (1) 24V or two (2) 12V connected in series Lead-Acid Deep Cycle or Lithium Deep Cycle battery for operation. 60A recommended. Battery not included, need be purchased separately.
- See more on Amazon...
Brand: 12 | Manufacturer: VEVOR
Dimensions: 43.70 x 21.60 x 9.80 Inches | Weight: 30.00 Pounds
See On Amazon #19
MotorGuide XI3-55lb Thrust 36" Shaft 12-Volt Kayak Trolling Motor with Wireless FOB Control (Non GPS)
Asin: B09F265PPL | Model: 940700270 | PartNumber: 940700270 | Ean: 0089287301086 | UPC: 089287301086
Easy Stow And Deploying: A Large Securestep Lever Allows Fishermen To Quickly And Easily Stow And Deploy, Saving You Time And Energy As You Bounce From Spot To Spot.
Led Dashboard: Easily Monitor Functions – Even In Bright Conditions – With Four Led Notifications Showing Power, Propeller Activity, Pinpoint Gps Status And Battery Life.
Wireless Control: Control In The Palm Of Your Hand. Intuitive Remote-Control Steering Is Ready For Use Right Out Of The Box. Also Compatible With Optional Wireless Foot Pedal.
Features
- Peak thrust: 55 lb; Shaft length: 36"; Max amp draw: 52A; Voltage: 12V DC; Speed control/Motor directions: Digital variable forward; Steering: Wireless Remote; Propeller: 3bl Machete; Pinpoint GPS: No; Pinpoint GPS Gateway: Compatible
- Wireless Control: control in the palm of your hand. Intuitive remote-control steering is ready for use right out of the box. Also compatible with optional wireless foot pedal
- Easy Stow and Deploying: a large SecureStep lever allows fishermen to quickly and easily stow and deploy, saving you time and energy as you bounce from spot to spot
- LED Dashboard: easily monitor functions even in bright conditions with four LED notifications showing Power, Propeller Activity, Pinpoint GPS status and Battery Life
- See more on Amazon...
Brand: MotorGuide | Manufacturer: MotorGuide
See On Amazon #20
Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat
Asin: B09NPT65T7 | Model: 1 | PartNumber: 1 | Ean: 0779288407145 | UPC: 779288407145
Universal Mount - Compatible With Most Electric Trolling Motors (24 To 55 Thrust). Ideal For Use As A Canoe Rudder, Or A Inflatable Pontoon Rudder, Kayak Rudder, Or Pelican Bass Raider 10E Rudder.
Bow Mount - Compatible With Edge, Minn Kota, And Fortrex, Etc. The Bow Mounting Motor Must Be Manually Drawn Rather Than Self-Deployed.
Easy Installation - Complimentary Socket Wrench For Easy Installation, Very Easy. You May Even Mount It With The Short End Down (Upside Down) For Shorter Motors.
More Control - Easy Turns When Steering, Provides Better Control In Wind Or Other Most Weather Environments, Reduces The Need For Oars, It Really Helps To Keep Your Boat Heading In The Wind And Reduces Your Boat Rotation As Much As Possible When The Motor Is Turned Off.
Features
- STURDY & DURABLE - The rudder is made of stainless steel material, and also equipped with stainless steel screws and jam nut to improve stability, rust and corrosion resistance. It is sturdy and durable to extend the service life and allowing you to focus more on fishing
- MORE CONTROL - Easy turns when steering, provides better control in wind or other most weather environments, reduces the need for oars, it really helps to keep your boat heading in the wind and reduces your boat rotation as much as possible when the motor is turned off
- UNIVERSAL MOUNT - Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder
- EASY INSTALLATION - Complimentary socket wrench for easy installation, very easy. You may even mount it with the short end down (upside down) for shorter motors
- BOW MOUNT - Compatible with EDGE, Minn Kota, and FORTREX, etc. The bow mounting motor must be manually drawn rather than self-deployed
- See more on Amazon...
Brand: Haoguo | Manufacturer: Haoguo
Dimensions: 1.00 x 2.00 x 1.00 Inches
See On Amazon
Looking For Something Else?
Search