MUZZYS A/C HACK KIT Fits: Ram 2019 2020 2021 2022 1500 2500 3500 Trucks with Weak/Warm Air Conditioning from Factory, Heater Core Blend Door By-Pass Mod Fix, W/Clamps Hose Shut Off Valve, Gas & Diesel
Asin: B092YVQS7K | Model: 10377 | PartNumber: 10377 | Ean: 0600599657694 | UPC: 600599657694
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Gas Trucks-**See Photo 4**Install The Valve At The Water Pump On The Front Of The Motor On The Heater Supply Hose. Find The Hose Labeled "Eng Out" And Remove It. Install This Valve To The Hose You Removed And Connect The Supplied Hose To The Valve And The Water Pump. Install Clamps As Shown In The Photos. Top Off Coolant, You Will Lose Some When You Initially Removed The Hose From The Water Pump..
There Is A Known Defect In These New Trucks. The Blend Door In The Dash Allows Hot Air Via The Heater Core Into The Hvac System When The Ac Is On. There Is A Service Bulletin To Address This And It Requires Them To Rip Your Entire Dash Out To Replace The Hvac System. I Guarantee You Will Have Damage And Problems Down The Road If You Allow Them To Do This Plus There Are Many Reports That It Does Not Even Fix The Problem! This Is An Easy Fix That Is Guaranteed To Make Your A/C Blow 8°-15° Cooler!.
Diesel Trucks- **See Photo 5** Install The Valve On The Heater Supply Line Above The Turbo. See Photo 5 To Determine Exact Location To Install The Valve. Remove The Heater Supply Line From The Black Tube Coming From The Motor. Install This Valve To The Hose You Removed And Connect The Included Hose To The Valve And Black Tube And Install The Clamps As Shown In The Photos. Top Off Your Coolant, You Will Lose A Small Amount When You Remove The Line..
This Kit Installs In Minutes Without Making Any Permanent Mods To Your Truck. It Is 100% Safe For Your Truck And Won't Cause Any Damage Or Check Engine Lights. This Kit Is Comprised Of Premium Components That Will Not Fail. Don't Buy Cheap Chinese Valves, Clamps, And Hoses To Save A Couple Dollars That Will Leave You On The Side Of The Road With Your 40K-90K Truck! Don't Be The Guy Using A $2 Clamp From Harbor Freight That Will Collapse Your Heater Hose And Cause Leaks And Cracks Over Time..
Features
- Muzzys Premium A/C Hack Mod Kit Fits: Ram 1981-2019, 2020, 2021, 2022, 2023, 2024 1500, 2500, 3500, Gas, and Diesel Trucks With Weak and or Warm A/C from the factory. Fix the design defect they refuse to fix yourself!
- This kit installs in minutes without making any permanent mods to your truck. It is 100% safe for your truck and won't cause any damage or Check Engine Lights. This kit is comprised of premium components that will not fail. Don't buy cheap chinese valves, clamps, and hoses to save a couple dollars that will leave you on the side of the road with your 40k-90K truck! Don't be the guy using a $2 clamp from harbor freight that will collapse your heater hose and cause leaks and cracks over time.
- Gas Trucks-**See Photo 4**Install the valve at the water pump on the front of the motor on the heater supply hose. Find the hose labeled Eng Out and remove it. Install this valve to the hose you removed and connect the supplied hose to the valve and the water pump. Install clamps as shown in the photos. Top off coolant, you will lose some when you initially removed the hose from the water pump.
- Diesel Trucks- **See Photo 5** Install the valve on the heater supply line above the turbo. See Photo 5 to determine exact location to install the valve. Remove the heater supply line from the black tube coming from the motor. Install this valve to the hose you removed and connect the included hose to the valve and black tube and install the clamps as shown in the photos. Top off your coolant, you will lose a small amount when you remove the line.
- There is a known defect in these new trucks. The blend door in the dash allows hot air via the heater core into the HVAC system when the AC is on. There is a service bulletin to address this and it requires them to rip your entire dash out to replace the HVAC system. I guarantee you will have damage and problems down the road if you allow them to do this plus there are many reports that it does not even fix the problem! This is an easy fix that is guaranteed to make your A/C blow 8 -15 cooler!
- See more on Amazon...
Brand: Muzzys | Manufacturer: Muzzys
Weight: 1.00 Pounds
See On Amazon Similar To MUZZYS A C HACK KIT
#1
Muzzys HEATER CORE BYPASS KIT, Universal, Fits MOST Vehicles and ALL 5/8" and 3/4" ID Heater Hoses. Easily Stop Flow to Your Heater Core With This Premium Hi Temp Hi Pressure By-Pass Kit. Made In USA!
Asin: B0932BRSBQ | Model: 10378 | PartNumber: 10378 | Ean: 0600599657700 | UPC: 600599657700
This Kit Is 100% Safe For Your Vehicle And Won't Cause Any Damage Or Check Engine Lights. This Kit Is Comprised Of Premium Components That Will Not Fail..
This Kit Does Fit 5/8" Hoses Contrary To Several Reviewers. It Does Take A Little M. A. N. To Get A 5/8" Hose On The Nipple But It Can Be Done. If Needed You Can Use A Little Soapy Water To Get The Hose To Slide Over The Barbs On The Valve..
This Kit Includes A 4" Section Of High Quality Heater Hose So You Do Not Need To Cut Or Modify Your Oem Heater Hose To Install This Valve. Install The Supplied Valve At The End Of Your Oem Hose And Then Attach The Valve And Supplied 4" Hose To Your Engine Outlet. On Some Vehicles It Will Not Be Easily Accessible To Install This Kit On The Engine Side Of The Heater Inlet Hose. If This Is Your Case You Can Also Install The Bypass Kit On The Fitting At The Firewall Where The Inlet Hose Attaches..
This Kit Fits All 5/8" And 3/4" Heater Hose Systems Which Is Just About 99% Of All Vehicles Out There..
This Premium Kit Is Made In The Usa And Includes: One Hi-Temp/Hi-Pressure Shut Off Valve, One 4" Hi-Temp/Hi Pressure Heater Hose, Three Stainless Steel Smooth Edge Band Clamps That Will Not Cut Into Your Hoses.
Easy 5 Minute Install. Locate Your Heater Core Inlet Hose. There Will Be Two Hoses Coming From The Firewall. One Is The Heater Core "In" And The Other Is The "Out". This Kit Must Be Installed On The "In" Hose. Follow The Hoses From The Firewall And Install This Kit On The Other End. Remove The Vehicle Heater Hose From The Port On The Engine And Install The Supplied Hose, Valve, And Clamps. This Kit Can Be Installed On Either End Of The Heater In Hose. See Photos To The Left..
Features
- This kit installs in minutes without making any permanent mods to your vehicle. NO HOSE CUTTING REQUIRED! With this kit you can control flow to your heater core with a turn of the handle!
- Easy 5 Minute Install. Locate your heater core inlet hose. There will be two hoses coming from the firewall. One is the heater core in and the other is the out. This kit MUST be installed on the IN hose. Follow the hoses from the firewall and install this kit on the other end. Remove the vehicle heater hose from the port on the engine and install the supplied hose, valve, and clamps. This kit can be installed on either end of the heater IN hose. SEE PHOTOS TO THE LEFT.
- This kit is 100% safe for your vehicle and won't cause any damage or Check Engine Lights. This kit is comprised of PREMIUM components that WILL NOT fail.
- This PREMIUM kit is MADE IN THE USA and includes: ONE Hi-Temp/Hi-Pressure Shut off Valve, ONE 4 Hi-Temp/Hi Pressure Heater Hose, THREE Stainless Steel Smooth Edge Band Clamps that WILL NOT cut into your hoses
- This Kit includes a 4 section of high quality heater hose so you do not need to cut or modify your OEM heater hose to install this valve. Install the supplied valve at the END of your OEM hose and then attach the valve and supplied 4 hose to your engine outlet. On some vehicles it will not be easily accessible to install this kit on the engine side of the heater inlet hose. If this is your case you can also install the bypass kit on the fitting at the firewall where the inlet hose attaches.
- This kit fits all 5/8 and 3/4 heater hose systems which is just about 99% of all vehicles out there.
- This kit DOES fit 5/8 hoses contrary to several reviewers. It does take a little M. A. N. to get a 5/8 hose on the nipple but it can be done. If needed you can use a little soapy water to get the hose to slide over the barbs on the valve.
- See more on Amazon...
Brand: Muzzys | Manufacturer: Muzzys
See On Amazon #2
Muzzys UNIVERSAL A/C HACK KIT, Fits MOST Vehicles and ALL 5/8" and 3/4" ID Heater Hose systems. Repair cars and trucks with Weak/Warm Air Conditioning, Faulty Blend Door, Heater Core By-Pass Mod Fix.
Asin: B0C4RX2HVK | Model: 10405 | PartNumber: 10405 | Ean: 0600599658288 | UPC: 600599658288
Easy 5 Minute Install. Locate Your Heater Core Inlet Hose. There Will Be Two Hoses Coming From The Firewall. One Is The Heater Core "In" And The Other Is The "Out". This Kit Must Be Installed On The "In" Hose. Follow The Hoses From The Firewall And Install This Kit On The Other End. Remove The Vehicle Heater Hose From The Port On The Engine And Install The Supplied Hose, Valve, And Clamps. This Kit Can Be Installed On Either End Of The Heater In Hose. See Photos To The Left..
This Kit Fits All 5/8" And 3/4" Heater Hose Systems Which Covers About 99% Of All Cars And Trucks Out There..
This Kit Does Fit 5/8" Hoses. It Does Take A Little M-A-N To Get A 5/8" Hose On The Nipple, If You Can't Get It On You Probabaly Shouldn't Be Working On Vehicles Or Perhaps You Should Get Your Wife To Help You. A Little Soapy Water Might Also Help..
This Premium Kit Is Made In The Usa And Includes: One Hi-Temp/Hi-Pressure Shut Off Valve, One 4" Hi-Temp/Hi Pressure Heater Hose, Three Stainless Steel Smooth Edge Band Clamps That Will Not Cut Into Your Hoses.
This Kit Includes A 4" Section Of High Quality Heater Hose So You Do Not Need To Cut Or Modify Your Oem Heater Hose To Install This Valve. Install The Supplied Valve At The End Of Your Oem Hose And Then Attach The Valve And Supplied 4" Hose To Your Engine Outlet. On Some Vehicles It Will Not Be Easily Accessible To Install This Kit On The Engine Side Of The Heater Inlet Hose. If This Is Your Case You Can Also Install The Bypass Kit On The Fitting At The Firewall Where The Inlet Hose Attaches..
This Kit Is 100% Safe For Your Vehicle And Won't Cause Any Damage Or Check Engine Lights. This Kit Is Comprised Of Premium Components That Will Not Fail..
This Kit Installs In Minutes Without Making Any Permanent Mods To Your Vehicle. No Hose Cutting Required! With This Kit You Can Control Flow To Your Heater Core With A Turn Of The Handle!.
Features
- This kit stops hot coolant from flowing to your heater core from the engine thus not allowing hot air to blend with the cold air behind the dash. This is often caused by a faulty blend door or simply a poor design from the vehicle manufacturer. This kit will NOT fix a non-functioning air conditioner. This kit simply blocks hot air from being introduced into a function air conditioning system. If you have a problem with hot air bleeding into your A/C system you can expect this kit to allow your A/C to blow 8 -15 cooler at the vents!
- This kit installs in minutes without making any permanent mods to your vehicle. NO HOSE CUTTING REQUIRED! With this kit you can control flow to your heater core with a turn of the handle!
- Easy 5 Minute Install. Locate your heater core inlet hose. There will be two hoses coming from the firewall. One is the heater core in and the other is the out. This kit MUST be installed on the IN hose. Follow the hoses from the firewall and install this kit on the other end. Remove the vehicle heater hose from the port on the engine and install the supplied hose, valve, and clamps. This kit can be installed on either end of the heater IN hose. SEE PHOTOS TO THE LEFT.
- This kit is 100% safe for your vehicle and won't cause any damage or Check Engine Lights. This kit is comprised of PREMIUM components that WILL NOT fail.
- This PREMIUM kit is MADE IN THE USA and includes: ONE Hi-Temp/Hi-Pressure Shut off Valve, ONE 4 Hi-Temp/Hi Pressure Heater Hose, THREE Stainless Steel Smooth Edge Band Clamps that WILL NOT cut into your hoses
- This Kit includes a 4 section of high quality heater hose so you do not need to cut or modify your OEM heater hose to install this valve. Install the supplied valve at the END of your OEM hose and then attach the valve and supplied 4 hose to your engine outlet. On some vehicles it will not be easily accessible to install this kit on the engine side of the heater inlet hose. If this is your case you can also install the bypass kit on the fitting at the firewall where the inlet hose attaches.
- This kit fits all 5/8 and 3/4 heater hose systems which covers about 99% of all cars and trucks out there.
- This kit DOES fit 5/8 hoses. It does take a little M-A-N to get a 5/8 hose on the nipple, if you can't get it on you probabaly shouldn't be working on vehicles or perhaps you should get your wife to help you. A little soapy water might also help.
- See more on Amazon...
Brand: Muzzys | Manufacturer: Muzzys
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search