Titan Fitness X-3 Series Crossmember with Gussets, 3" x 3" Stabilizer Bar Power Rack Connector
Asin: B093FLS9R3 | Ean: 0840009215438 | UPC: 840009215438
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.2-Inch Hole Spacing Spans The Length Of The Stabilizer Bar.
Stabilizer Bar With Gusset Plates Square Your Rack And Lock It Together.
Laser-Cut Titan €Œt†Logo Gusset Plate.
Add New Workstations To The Front Or Back Of Your Rack.
Features
- Compatible with the X-3 Series Power Racks
- Add new workstations to the front or back of your rack
- 2-inch hole spacing spans the length of the stabilizer bar
- Laser-cut TITAN T logo Gusset Plate
- Stabilizer bar with Gusset plates square your rack and lock it together
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 26.00 Pounds
See On Amazon Similar To Titan Fitness X3 Series Crossmember
#1
Titan Fitness X-3 Series Roller J-Hooks
Asin: B086R5SYHB | Ean: 0840009208249 | UPC: 840009208249
Locking Mechanism: The Built-In Spring Pin Locking Mechanism Allows You To Train With A Piece Of Mind, Knowing That The X-3 Series Roller J-Hooks Won't Move..
Subtle Features: The J-Hooks Have A Tilted Roller Base Which Helps Avoid Rocking When Unracking The Barbell..
Preserve Your Equipment: Roller J-Hooks Are Padded With Uhmw Plastic, Which Will Not Only Protect The Paint On Your Power Rack, But Also Reduce The Noise And Eliminate Any Chance Of Equipment Damage..
Features
- UPDATED VERSION: Featuring UHMW plastic on the implement's frame to prevent the rack from being damaged. Additionally, we have replaced the M12 front nut with a flush fastener to prevent your bar from being damaged.
- PRESERVE YOUR EQUIPMENT: Roller J-Hooks are padded with UHMW plastic, which will not only protect the paint on your power rack, but also reduce the noise and eliminate any chance of equipment damage.
- LOCKING MECHANISM: The built-in spring pin locking mechanism allows you to train with a piece of mind, knowing that the X-3 Series Roller J-Hooks won't move.
- SUBTLE FEATURES: The J-Hooks have a tilted roller base which helps avoid rocking when unracking the barbell.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 9.00 Pounds
See On Amazon #2
Titan Fitness Pair of Shackles Fit X-3 Series Power Racks, 500 LB Capacity, Fits on 3" x 3" Crossmember
Asin: B09BDFTW46 | Ean: 0840009215391 | UPC: 840009215391
Add Accessories To Your Pull-Up System.
Includes Hardware And Carabiners.
Work Your Grip Strength And Endurance With Pull-Up And Hang Varieties.
Fits On 3 X 3-Inch Steel Crossmembers.
Features
- Compatible with the X-3 Series Power Racks
- Fits on 3 x 3-inch steel crossmembers
- Add accessories to your Pull-Up System
- Work your grip strength and endurance with Pull-Up and Hang varieties
- Includes hardware and carabiners
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 6.00 Pounds
See On Amazon #3
Titan Fitness T-3 Series Black Short Power Rack, 24in Depth, 1,100 LB Capacity Cage for Weightlifting and Strength Training
Asin: B0964RMBNY | Ean: 0840009216633 | UPC: 840009216633
Pull-Up Bars: Our Standard Front And Back Crossmembers Are The T-3 Series Single Pull-Up Bar With A 1.25" Diameter And Fat Pull-Up Bar With A 2" Diameter. The Bars Include 7.5" X 2" Endplates That Mount 6" On The Center And Are Powder-Coated Black..
All-In-One Gym Solution: Each Rack Features Laser-Cut Holes Along The Sides Of The Uprights To Allow Your Power Rack To Be Compatible With A Series Of Accessories That Will Squeeze Every Ounce Out Of Your Workout Routines..
Standard J-Hooks: Our Standard J-Hook Features A Nylon Plastic Core On The Backside And The Clasp To Protect The Bar's Knurling And The Uprights From Scratching. They Are Rated At A Combined 1,000 Lb Weight Capacity..
Custom Color Options: Make Your Power Rack The Centerpiece Of Your Gym With Your Choice In Three Custom Color Powder Coated Finishes For 82" Or 91" Uprights. Please Note That The Crossmember Stabilizers Are Only Available In A Black Powder Coat. Titan Amazon Bullet Point 2 Side Bracing Depth: The 24" Depth Side Bracings With Laser-Cut Holes Are Spaced 2-Inches On The Center. The Bracings Include 7.5" X 2" Endplates That Mount 6" On The Center And Are Powder-Coated Black..
Features
- T-3 SERIES POWER RACK: Available in 82 or 91-inch models, comes standard with (4) laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing above and below, 6-inch side hole spacing throughout entire upright, and (4) steel side bracings for optimal stability.
- CUSTOM COLOR OPTIONS: Make your Power Rack the centerpiece of your gym with your choice in three custom color powder coated finishes for 82 or 91 uprights. Please note that the crossmember stabilizers are only available in a black powder coat. TITAN AMAZON BULLET POINT 2 SIDE BRACING DEPTH: The 24 depth side bracings with laser-cut holes are spaced 2-inches on the center. The bracings include 7.5 x 2 endplates that mount 6 on the center and are powder-coated black.
- PULL-UP BARS: Our standard front and back crossmembers are the T-3 Series Single Pull-Up Bar with a 1.25 diameter and Fat Pull-Up Bar with a 2 diameter. The bars include 7.5 x 2 endplates that mount 6 on the center and are powder-coated black.
- STANDARD J-HOOKS: Our standard J-Hook features a nylon plastic core on the backside and the clasp to protect the bar's knurling and the uprights from scratching. They are rated at a combined 1,000 LB weight capacity.
- ALL-IN-ONE GYM SOLUTION: Each rack features laser-cut holes along the sides of the uprights to allow your power rack to be compatible with a series of accessories that will squeeze every ounce out of your workout routines.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 186.00 Pounds
See On Amazon #4
Titan Fitness T-3 Series Space Saving Rack 82 in. Tall 24 in. Deep Wall Mount
Asin: B075JNTFF9
Durable Construction: The T-3 Space Saver Racks Are Made From Tough, Heavy-Duty Steel. Its Durable Construction Ensures That It Will Withstand The Most Intense Workouts You Can Muster. With Its Powerful Steel Material, It Has A Rackable Capacity Of 1100 Lbs. And A Total Rack Capacity Of 4400 Lbs..
Includes: (2) Heavy-Duty Steel Uprights, (2) Top Side Braces, (2) Handed J-Hooks, Skinny Pull-Up Bar, And Assembly Hardware..
Easy Assembly: The Simple And Efficient Bolt-Together Design Means You Can Set This Power Rack Up In No Time. For Safety Reasons, Titan Recommends A Two-Person Assembly For All Home Or Garage Gym Power Racks, Including The T-3. Get Ripped In The Comfort Of Your Own Home With Titan Fitnessâ€S T-3 Space Saver Rack!.
Build Muscle: Get Ripped Using The T-3 Space Saver Rack! It Can Accommodate Many Different Heights And Workouts. You Can Perform A Variety Of Exercises With The T-3 Series, Including Chin-Ups, Deadlifts, And Pull-Ups. Place A Bench Underneath And Perform Bench Presses Or Leave It Empty And Perform Powerful Barbell Squats.
Features
- IMPROVE YOUR FORM: If you re not lifting weights right, you might strain or injure a muscle, putting you out of the game for months. That s why we ve designed special safety features on this power rack. On either side of the power rack, there are spotter bars designed to catch the barbell, helping you stay safe while you work out. The T-3 rack also has a convenient, wide walk-in design.
- BUILD MUSCLE: Get ripped using the T-3 Space Saver Rack! It can accommodate many different heights and workouts. You can perform a variety of exercises with the T-3 series, including chin-ups, deadlifts, and pull-ups. Place a bench underneath and perform bench presses or leave it empty and perform powerful barbell squats
- DURABLE CONSTRUCTION: The T-3 Space Saver Racks are made from tough, heavy-duty steel. Its durable construction ensures that it will withstand the most intense workouts you can muster. With its powerful steel material, it has a rackable capacity of 1100 lbs. and a total rack capacity of 4400 lbs.
- EASY ASSEMBLY: The simple and efficient bolt-together design means you can set this power rack up in no time. For safety reasons, Titan recommends a two-person assembly for all home or garage gym power racks, including the T-3. Get ripped in the comfort of your own home with Titan Fitness s T-3 Space Saver Rack!
- INCLUDES: (2) heavy-duty steel uprights, (2) top side braces, (2) Handed J-Hooks, skinny pull-up bar, and assembly hardware.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 121.00 pounds
See On Amazon #5
Titan Fitness T-3 Series Stabilizer Bar, 2" x 3" Crossmember Power Rack Connector
Asin: B093DN4C7N | Ean: 0840009215339 | UPC: 840009215339
Add A Bottom Stabilizer Bar For Extra Stability (Eliminates Walk-Through Design).
Pair With T-3 Series Crossmember With Gussets To Create Top And Bottom Supports.
Connect Multiple T-3 Series Power Racks Together To Make A Multi-Power Rack Station.
2-Inch Hole Spacing Spans The Length Of The Stabilizer Bar.
Features
- Compatible with the T-3 Series Power Rack
- 2-inch hole spacing spans the length of the stabilizer bar
- Add a bottom stabilizer bar for extra stability (eliminates walk-through design)
- Connect multiple T-3 Series Power Racks together to make a Multi-Power Rack Station
- Pair with T-3 Series Crossmember With Gussets to create top and bottom supports
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 15.00 Pounds
See On Amazon #6
Titan Fitness T-3 Series 36 Flip-Down Safety Bars for T-3 Series Power Racks, Rated 1,500 LB, UHMW Liner, Pulling Platform
Asin: B09TX1LBZ4 | Ean: 0840009215247 | UPC: 840009215247
2-Inch Side Hole Spacing Spans The Entire Bar.
Quick Pins To Prevent Safeties From Rotating.
Nylon Liner Spans The Entire Bar.
J-Hook Style Mounting System Allows For Quick Adjustments.
Features
- Compatible with T-3 Series Power Racks - Can be used as a pulling platform
- J-hook style mounting system allows for quick adjustments
- 2-inch side hole spacing spans the entire bar
- Nylon liner spans the entire bar
- Quick Pins to prevent safeties from rotating
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Dimensions: 8.00 x 43.50 x 2.00 inches | Weight: 35.00 Pounds
See On Amazon #7
Titan Fitness T-3 Series Half Rack Conversion Kit for T-3 Series Tall or Short Squat Stand, 1,000 LB Capacity
Asin: B09CSF856P | Ean: 0840009212857 | UPC: 840009212857
Optional Weight Plate Holders: Customize Your Power Rack With T-3 Series Weight Plate Holders. Featuring 7.5 X 2-Inch Endplates That Are Bolted 6-Inches On Center. The Sleeves Provide A 49 Mm Diameter And Support Up To 11.25-Inches Of Loadable Plate Length..
Hardware Included: Each Unit Comes With All The Hardware You Need To Assemble Your T-3 Series Half Rack Conversion Kit. For Safety Reasons, Titan Recommends A Two-Person Assembly For All Home Or Garage Gym Power Racks..
Designed Safe. Designed Strong.: You Are Never More Vulnerable As An Athlete Than When You Are Working Out Heavy, Let Alone Maxing Out. Our T-3 Series Half Rack Conversion Kit Is Built Sturdy So You Have All The Support You Could Ever Need Throughout Your Workout..
Compatible With: The T-3 Series Short (72-Inch) And Tall (92-Inch) Squat Stands From Titan Fitness Gives You The Same Durability And Versatility Of The T-3 Series Power Rack With A Dynamic Bolt-Together Frame..
Features
- CONVERSION KIT: Featuring (2) 70-inch laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing above and below, 6-inch side hole spacing throughout entire upright, (2) topside braces, (2) triangle gusset plates, and all the assembly hardware for the bolt-together frame.
- COMPATIBLE WITH: The T-3 Series Short (72-inch) and Tall (92-inch) Squat Stands from Titan Fitness gives you the same durability and versatility of the T-3 Series Power Rack with a dynamic bolt-together frame.
- OPTIONAL WEIGHT PLATE HOLDERS: Customize your Power Rack with T-3 Series Weight Plate Holders. Featuring 7.5 x 2-inch endplates that are bolted 6-inches on center. The sleeves provide a 49 mm diameter and support up to 11.25-inches of loadable plate length.
- DESIGNED SAFE. DESIGNED STRONG.: You are never more vulnerable as an athlete than when you are working out heavy, let alone maxing out. Our T-3 Series Half Rack Conversion Kit is built sturdy so you have all the support you could ever need throughout your workout.
- HARDWARE INCLUDED: Each unit comes with all the hardware you need to assemble your T-3 Series Half Rack Conversion Kit. For safety reasons, Titan recommends a two-person assembly for all home or garage gym power racks.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 68.00 Pounds
See On Amazon #8
Titan Fitness Titan Series Flip-Down Safety Bars, 36" Depth Spotter Arms, Rated 3,000 LB, Safety Bars for 3"x3" Uprights with Plastic Liner Protection, Spotter Arms for Squat Rack
Asin: B0D3NJ3S14 | Ean: 0840009226090 | UPC: 840009226090
Easy Installation: Raising And Lowering Your Safeties To The Ideal Height Has Never Been Easier. Simply Slide Your Safeties Into Your Uprights With The J-Cup Mounting Style And Lock Them Into Place With The Pin, Then Flip Them Down To Fully Secure In Seconds..
Durable Construction: Constructed With Heavy-Duty 3" X 3" 11-Gauge Steel, These Spotter Arms Feature A Tough Protective Umhw Plastic Liner That Spans The Top Of The Entire Safety Bar To Reduce Noise And Protect Both Your Barbell's Knurling And Your Power Rack's Uprights..
Double As A Pulling Platform: These Versatile Safety Catches Double As A Band Peg Pulling Platform For More Of A Challenge. Each Bar Features Laser Cut Numbers Every 2" For Band Peg Placement And Has A Weight Capacity Of 3,000 Lb..
Compatibility: These Flip-Down Safety Bars Fit Titan Series 90" Or 100" Power Racks (Note: Available In 36" And 42" Depth Options €“ Make Sure To Choose The Correct Depth For Your Rack!).
Features
- PROTECTIVE FLIP-DOWN SPOTTER ARMS: Stay protected when you miss a lift. These flip-down safety catches provide protection when you don t have a spotter, a must in any home gym. Not only do they protect you through a failed rep, they also protect against wear and tear on your barbell and rack.
- COMPATIBILITY: These flip-down safety bars fit TITAN Series 90 or 100 power racks (NOTE: Available in 36 and 42 depth options make sure to choose the correct depth for your rack!)
- EASY INSTALLATION: Raising and lowering your safeties to the ideal height has never been easier. Simply slide your safeties into your uprights with the J-cup mounting style and lock them into place with the pin, then flip them down to fully secure in seconds.
- DOUBLE AS A PULLING PLATFORM: These versatile safety catches double as a band peg pulling platform for more of a challenge. Each bar features laser cut numbers every 2 for band peg placement and has a weight capacity of 3,000 LB.
- DURABLE CONSTRUCTION: Constructed with heavy-duty 3 x 3 11-gauge steel, these spotter arms feature a tough protective UMHW plastic liner that spans the top of the entire safety bar to reduce noise and protect both your barbell's knurling and your power rack's uprights.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Dimensions: 9.00 x 46.00 x 8.00 inches | Weight: 0.00 Pounds
See On Amazon #9
Titan Fitness T-3 Series Black Tall 36in Depth Power Rack Extension Kit
Asin: B09B7XMDF1 | Ean: 0840009216688 | UPC: 840009216688
Standard Pull-Up Bar: Our Standard, Single Pull-Up Bar With A 1.25-Inch Diameter Includes 7.5 X 2-Inch Endplates That Mount 6-Inches On Center And Are Powder-Coated Black..
Hardware Included: Each Unit Comes With All The Hardware You Need To Assemble Your Power Rack Extensions. For Safety Reasons, Titan Recommends A Two-Person Assembly For All Home Or Garage Gym Power Racks..
Weight Plate Holders: The Plate Holders Includes 7.5 X 2-Inch Endplates That Are Bolted 6-Inches On Center. The Sleeves Provide A 49 Mm Diameter And Support Up To 11.25-Inches Of Loadable Plate Length..
All-In-One Gym Solution: Features Laser-Cut Holes Along The Sides Of The Uprights To Allow Your Power Rack To Be Compatible With A Series Of Accessories That Will Squeeze Every Ounce Out Of Your Workout Routines. Take Your Workouts Even Further And Add More Variety To Your Power Rack With Accessories Built Specifically For The T-3 Series Power Rack..
Features
- T-3 SERIES EXTENSIONS: Customize your Power Rack with 24 or 36-inch depth side bracings. The models come standard with (2) laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing above and below, 6-inch side hole spacing throughout the entire upright, and (4) steel side bracings for optimal stability.
- ALL-IN-ONE GYM SOLUTION: Features laser-cut holes along the sides of the uprights to allow your power rack to be compatible with a series of accessories that will squeeze every ounce out of your workout routines. Take your workouts even further and add more variety to your power rack with accessories built specifically for the T-3 Series Power Rack.
- STANDARD PULL-UP BAR: Our standard, Single Pull-Up Bar with a 1.25-inch diameter includes 7.5 x 2-inch endplates that mount 6-inches on center and are powder-coated black.
- WEIGHT PLATE HOLDERS: The plate holders includes 7.5 x 2-inch endplates that are bolted 6-inches on center. The sleeves provide a 49 mm diameter and support up to 11.25-inches of loadable plate length.
- HARDWARE INCLUDED: Each unit comes with all the hardware you need to assemble your power rack extensions. For safety reasons, Titan recommends a two-person assembly for all home or garage gym power racks.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 158.00 Pounds
See On Amazon #10
Titan Fitness X-3 Series Adjustable Lever Arms, Rated 600 LB Per Arm, Adjustable Pin-On Style Design
Asin: B08666WQ9F | Ean: 0840009206160 | UPC: 840009206160
Save Space: This Power Rack Attachment Gives You A One-Stop Place For The Bulk Of Your Weightlifting Workout And Will Save Space In Your Home Gym..
These Arms Are 45-Pounds Each And Come With A Pair Of 32Mm Handles That Have Multiple Grip Options, Including Neutral And Angled. The Loadable Weight Posts Are 11-Inches Long And Have A 50Mm Diameter..
Durable Construction: The Arms Are 3" X 3", 11-Gauge Steel, And Have A Black Powder Coat Finish To Protect Your Equipment From Damage. This Mechanism Fits Most Standard-Sized Plates For Weightlifting And Are Rated At 600-Pounds Per Arm..
Adjustable Bracket Design: These Adjustable Brackets Allow You To Work Out At Your Own Pace. First, Align The Pin-On Style Brackets With Your Uprights. Once You Have Chosen A Good Height €“ Insert The Bracket And Add The Accessory Pin..
Features
- UPPER BODY EXERCISE: This set of hinged power rack arms is perfect for various upper body exercises. Use them for multiple presses, rows, and squats to get the toned physique you have always wanted.
- ADJUSTABLE BRACKET DESIGN: These adjustable brackets allow you to work out at your own pace. First, align the pin-on style brackets with your uprights. Once you have chosen a good height insert the bracket and add the accessory pin.
- SAVE SPACE: This power rack attachment gives you a one-stop place for the bulk of your weightlifting workout and will save space in your home gym.
- DURABLE CONSTRUCTION: The arms are 3 x 3, 11-Gauge steel, and have a black powder coat finish to protect your equipment from damage. This mechanism fits most standard-sized plates for weightlifting and are rated at 600-pounds per arm.
- These arms are 45-pounds each and come with a pair of 32mm handles that have multiple grip options, including neutral and angled. The loadable weight posts are 11-inches long and have a 50mm diameter.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 65.00 Pounds
See On Amazon #11
Titan Fitness Strap Safety System T-3 Series 24" Depth
Asin: B09CJHNGQY | Ean: 0840009201295 | UPC: 840009201295
Saves Your Knurling And Bar From Damage.
Slope The Strap Heights To Have The Bar Roll Safely Away From You.
Fully Adjustable Heights For Either Side Of Strap.
2-Inch Wide Reinforced Nylon Webbing.
Features
- Compatible with T-3 Series Power Racks (24" or 36" Depth)
- 2-inch wide reinforced Nylon webbing
- Saves your knurling and bar from damage
- Fully adjustable heights for either side of strap
- Slope the strap heights to have the bar roll safely away from you
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 22.00 Pounds
See On Amazon #12
Titan Fitness Bracket Conversion Kit X-3 Series Pair for Lever Arms Steel
Asin: B086H6Z8NY
Durable Steel Construction Will Maintain Integrity For Years To Come.
Black Powder Coating Will Protect Against Early Rust / Scuffing.
Adjustable Jhook Style Design Allows Attaching / Detaching With Ease.
Features
- Compatible only with X3 Series Power Rack Lever Arms
- Adjustable JHook Style design allows attaching / detaching with ease
- Durable steel construction will maintain integrity for years to come
- Black powder coating will protect against early rust / scuffing
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 35.00 pounds
See On Amazon #13
Titan Fitness Sphere Pull-Up Bar Fits T-3, X-3, TITAN Series Racks, Rated 440 LB, Multi-Grip Rack Mounted Training Station
Asin: B0BLSKTSK7 | Ean: 0840009225871 | UPC: 840009225871
Medium Knurled Grip Texture | Standard And Fat Grip Options.
Installation Hardware Included.
Non-Slip Grips For Added Safety | High-Quality Steel Construction.
Offers Wide, Narrow, Neutral, Pronated, And Supinated Grip Options.
Features
- Compatible with T-3, X-3, or TITAN Series Power Racks
- Offers wide, narrow, neutral, pronated, and supinated grip options
- Medium knurled grip texture | Standard and Fat grip options
- Non-slip grips for added safety | High-quality steel construction
- Installation hardware included
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
See On Amazon #14
Titan Fitness T-3 Series Crossmember with Gussets, 2" x 3" Stabilizer Bar Power Rack Connector
Asin: B093DWB23B | Ean: 0840009215186 | UPC: 840009215186
2-Inch Hole Spacing Spans The Length Of The Stabilizer Bar.
Pair With T-3 Series Stabilizer Bar To Create Top And Bottom Supports.
Stabilizer Bar With Gusset Plates Square Your Rack And Lock It Together.
Add New Workstations To The Front Or Back Of Your Rack.
Features
- Compatible with the T-3 Series Power Racks
- Add new workstations to the front or back of your rack
- 2-inch hole spacing spans the length of the stabilizer bar
- Stabilizer bar with Gusset plates square your rack and lock it together
- Pair with T-3 Series Stabilizer Bar to create top and bottom supports
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 19.00 Pounds
See On Amazon #15
Titan Fitness X-3 Series 24" Flip-Down Safety Bars for X-3 Series Bolt-Down Power Racks, Rated 3,000 LB, Nylon Liner Pulling Platform, Safety Spotters
Asin: B0CNY93DD8 | Ean: 0840009233876 | UPC: 840009233876
Nylon Liner Spans The Entire Bar; Can Be Used As A Pulling Platform.
Quick Pins To Prevent Safeties From Rotating.
2" Side Hole Spacing Spans The Entire Safety Bar.
J-Hook Style Mounting System Allows For Quick Adjustments.
Features
- Compatible with X-3 Series Bolt-Down Power Racks; Fits on 3" x 3" steel uprights
- J-hook style mounting system allows for quick adjustments
- Nylon liner spans the entire bar; Can be used as a pulling platform
- 2 side hole spacing spans the entire safety bar
- Quick Pins to prevent safeties from rotating
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 34.00 Pounds
See On Amazon #16
Titan Fitness X-3 Series Tall Bolt Down 24-in. D Extension Kit 90-in. H
Asin: B09CLRSFQC | Ean: 0840009217074 | UPC: 840009217074
Weight Plate Holders: The Plate Holders Include 7.5 X 2-Inch Endplates That Are Bolted 6-Inches On Center. The Sleeves Provide A 49 Mm Diameter And Support Up To 11.25-Inches Of Loadable Plate Length..
Designed Safe. Designed Strong.: You Are Never More Vulnerable As An Athlete Than When Working Out Heavy, Let Alone Maxing Out. Our X-3 Series Bolt Down Power Rack Has A Rackable Capacity Of 1,650-Pounds And A Total Rack Capacity Up To 6,170-Pounds, Additionally, The Rack Extensions Have A Total Rack Capacity Up To 1,000-Pounds..
All-In-One Gym Solution: Features Laser-Cut Holes Along The Sides Of The Uprights To Allow Your Power Rack To Be Compatible With A Series Of Accessories That Will Squeeze Every Ounce Out Of Your Workout Routines. Take Your Workouts Even Further And Add More Variety To Your Power Rack With Accessories Built Specifically For The X-3 Series Bolt Down Power Rack..
Standard Pull-Up Bar: Our Standard, Single Pull-Up Bar With A 1.25-Inch Diameter Includes 7.5 X 2-Inch Endplates That Mount 6-Inches On Center And Are Powder-Coated Black..
Features
- X-3 SERIES BOLT DOWN EXTENSIONS: Customize your Power Rack with 24 or 36-inch depth side bracings. The models come standard with (2) laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing above and below, 6-inch side hole spacing throughout the entire upright, and (4) steel side bracings for optimal stability.
- STANDARD PULL-UP BAR: Our standard, Single Pull-Up Bar with a 1.25-inch diameter includes 7.5 x 2-inch endplates that mount 6-inches on center and are powder-coated black.
- WEIGHT PLATE HOLDERS: The plate holders include 7.5 x 2-inch endplates that are bolted 6-inches on center. The sleeves provide a 49 mm diameter and support up to 11.25-inches of loadable plate length.
- ALL-IN-ONE GYM SOLUTION: Features laser-cut holes along the sides of the uprights to allow your power rack to be compatible with a series of accessories that will squeeze every ounce out of your workout routines. Take your workouts even further and add more variety to your power rack with accessories built specifically for the X-3 Series Bolt Down Power Rack.
- DESIGNED SAFE. DESIGNED STRONG.: You are never more vulnerable as an athlete than when working out heavy, let alone maxing out. Our X-3 Series Bolt Down Power Rack has a rackable capacity of 1,650-pounds and a total rack capacity up to 6,170-pounds, additionally, the rack extensions have a total rack capacity up to 1,000-pounds.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 160.00 pounds
See On Amazon #17
Titan Fitness X-3 Series Rack Mounted Step-Up Platform, 22" x 15" Diamond Plate Platform
Asin: B099QWYNVV | Ean: 0840009215407 | UPC: 840009215407
Large Platform Provides Ample Room For Varying Exercises.
Extends 21-Inches From Your Power Rack.
Quick Pin Secures The Step To The Rack And Allows You To Mount The Step At The Desired Height.
Fits On 3 X 3-Inch Steel Uprights.
Features
- Compatible with the X-3 Series Power Racks
- Fits on 3 x 3-inch steel uprights
- Large platform provides ample room for varying exercises
- Quick pin secures the step to the rack and allows you to mount the step at the desired height
- Extends 21-inches from your power rack
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 37.00 Pounds
See On Amazon #18
Titan Fitness T-3 Series Half Rack Conversion Kit for T-3 Series Tall or Short Squat Stand, 1,000 LB Capacity
Asin: B09DZ3253Z | Ean: 0840009217432 | UPC: 840009217432
Includes Weight Plate Holders: Customize Your Power Rack With T-3 Series Weight Plate Holders. Featuring 7.5 X 2-Inch Endplates That Are Bolted 6-Inches On Center. The Sleeves Provide A 49 Mm Diameter And Support Up To 11.25-Inches Of Loadable Plate Length..
Hardware Included: Each Unit Comes With All The Hardware You Need To Assemble Your T-3 Series Half Rack Conversion Kit. For Safety Reasons, Titan Recommends A Two-Person Assembly For All Home Or Garage Gym Power Racks..
Designed Safe. Designed Strong.: You Are Never More Vulnerable As An Athlete Than When You Are Working Out Heavy, Let Alone Maxing Out. Our T-3 Series Half Rack Conversion Kit Is Built Sturdy So You Have All The Support You Could Ever Need Throughout Your Workout..
Compatible With: The T-3 Series Short (72-Inch) And Tall (92-Inch) Squat Stands From Titan Fitness Gives You The Same Durability And Versatility Of The T-3 Series Power Rack With A Dynamic Bolt-Together Frame..
Features
- CONVERSION KIT: Featuring (2) 70-inch laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing above and below, 6-inch side hole spacing throughout entire upright, (2) topside braces, (2) triangle gusset plates, and all the assembly hardware for the bolt-together frame.
- COMPATIBLE WITH: The T-3 Series Short (72-inch) and Tall (92-inch) Squat Stands from Titan Fitness gives you the same durability and versatility of the T-3 Series Power Rack with a dynamic bolt-together frame.
- INCLUDES WEIGHT PLATE HOLDERS: Customize your Power Rack with T-3 Series Weight Plate Holders. Featuring 7.5 x 2-inch endplates that are bolted 6-inches on center. The sleeves provide a 49 mm diameter and support up to 11.25-inches of loadable plate length.
- DESIGNED SAFE. DESIGNED STRONG.: You are never more vulnerable as an athlete than when you are working out heavy, let alone maxing out. Our T-3 Series Half Rack Conversion Kit is built sturdy so you have all the support you could ever need throughout your workout.
- HARDWARE INCLUDED: Each unit comes with all the hardware you need to assemble your T-3 Series Half Rack Conversion Kit. For safety reasons, Titan recommends a two-person assembly for all home or garage gym power racks.
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 89.00 Pounds
See On Amazon #19
Titan Fitness X-3 Series Stabilizer Bar, 3" x 3" Crossmember Power Rack Connector
Asin: B093FGW16P | Ean: 0840009215421 | UPC: 840009215421
Add A Bottom Stabilizer Bar For Extra Stability (Eliminates Walk-Through Design).
Pair With X-3 Series Crossmember With Gussets To Create Top And Bottom Supports.
Connect Multiple X-3 Series Power Racks Together To Make A Multi-Power Rack Station.
2-Inch Hole Spacing Spans The Length Of The Stabilizer Bar.
Features
- Compatible with X-3 Series Bolt-Down Power Rack
- 2-inch hole spacing spans the length of the stabilizer bar
- Add a bottom stabilizer bar for extra stability (eliminates walk-through design)
- Connect multiple X-3 Series Power Racks together to make a Multi-Power Rack Station
- Pair with X-3 Series Crossmember With Gussets to create top and bottom supports
- See more on Amazon...
Brand: Titan Fitness | Manufacturer: Titan Fitness
Weight: 20.00 Pounds
See On Amazon
Looking For Something Else?
Search