SENDUO Pen Blank Drilling Chuck 2 inch 2 jaws,Woodworking Products Dedicated Pen Blank Chuck,Pen Blank Chuck for Woodturning
Asin: B094J6TBK1 | Model: 1 | PartNumber: 1 | Ean: 0657573974582 | UPC: 657573974582
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Clamping Range Of The Pen Blank Chuck Is Approx 8×8 To 23×23Mm For Square Shaped Material..
Includes 2 Tightening Levers To Tighten And Loosen The Jaws..
The Pen Blank Lathe Chuck Is Pre Threaded To 1" X 8 Tpi To Match Your Spindle..
Reversible Jaws On Chuck Will Secure Blanks Up To 1" Square X 4" Long.
Features
- Pen Blank Drilling Chuck-Weighs 1.43 pounds, and diameter is 2.5";Made of high-quality steel,can withstand high-intensity work without damage.
- Reversible jaws on chuck will secure blanks up to 1 square x 4 long
- The clamping range of the pen blank chuck is approx 8 8 to 23 23mm for square shaped material.
- The pen blank lathe chuck is pre threaded to 1 x 8 tpi to match your spindle.
- Includes 2 tightening levers to tighten and loosen the jaws.
- See more on Amazon...
Brand: SENDUO | Manufacturer: SENDUO
Dimensions: 2.76 x 3.90 x 2.76 inches
See On Amazon Similar To SENDUO Pen Blank Drilling Chuck
#1
NNBWKIXI 2-inch 2-Jaw Pen Drilling Wood Lathe Chuck with 1" X 8TPI Direct Thread,Dedicated Pen Drilling Lathe Chuck Chuck for Woodturning Pen Turning Lathe
Asin: B0CJTY5BM2 | Model: NNBWKIXI-0926 | PartNumber: NNBWKIXI-0926 | Ean: 0788081186614 | UPC: 788081186614
Precision Design】:This Chuck Has A Special V- Slot Design Inside The Jaw,Which Is More Suitable For Clamp Square Material. The Jaws Are Attached To The Chuck Body Through An I-Shaped Structure Which Has High Precision And Firmness..
【Free Accessories】:We Will Provide You 2 Tightening Levers Allows You Easily To Tighten And Loosen The Jaws..
【Simple And Convenient】:Added This Pen Chuck To Your Lathe The Pen Blanks Come Out With The Drilled Hole So Accurate,Very Easy To Set Up And Drill The Pen Blanks..
【Applicable Size】:The Clamping Range Of The Lathe Chuck Is Approx 8×8 To 23×23Mm For Square Shaped Material. Weights 1.43 Pounds, And 2.5" Diameter..
Features
- Scope of Application Applicable to pen-making square material clamping, auxiliary drilling, end milling. With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market.
- Applicable Size The clamping range of the lathe chuck is approx 8 8 to 23 23mm for square shaped material. Weights 1.43 pounds, and 2.5 diameter.
- Precision Design This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness.
- Simple and Convenient Added this pen chuck to your lathe the pen blanks come out with the drilled hole so accurate Very easy to set up and drill the pen blanks.
- FREE ACCESSORIES We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws.
- See more on Amazon...
Brand: NNBWKIXI | Manufacturer: NNBWKIXI
Dimensions: 2.50 x 2.00 x 2.50 inches
See On Amazon #2
PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For "C" Series PSI Lathe Chucks
Asin: B00AO01JVA | Model: CJAWPEN | PartNumber: CJAWPEN | Ean: 0718122572694 | UPC: 718122572694
Converts Your Existing Chuck Fast And Easy..
Inexpensive And Accurate..
Eliminates The Need To Purchase A Separate New Chuck For Blank Drilling..
Features
- Will hold a large variety of blank sizes depending on which chuck you attach these jaws.
- Eliminates the need to purchase a separate new chuck for blank drilling.
- Converts your existing chuck fast and easy.
- Inexpensive and accurate.
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 1.50 x 2.00 x 2.25 inches | Weight: 0.50 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #3
marddpair Woodturning Lathe Chuck 3-1/4Inch Large Dedicated Pen Blank Drilling Lathe Chuck with 1 x 8TPI Pre-Threaded for Lathe
Asin: B09M8HPCV8 | Model: Does Not Apply | PartNumber: Does Not Apply
Product Size - The Chuck Diameter Is 3.25 Inch, The Chuck Is Pre Threaded To 1 X 8 Tpi To Match Your Spindle..
Product Package- Includes One Chuck Body And Two Tightening Levers To Tighten And Loosen The Jaws..
Usage - Thread Chuck Onto Your Lathes Headstock Spindle. Mount A Drill Bit In A Drill Chuck In Your Lathes Tailstock. Advance Drill Bit Into Blank While Lathe Is Spinning..
Jaws - Reversible Jaws On Chuck Will Secure Blanks Up To 2. 5 Square X 5 Long..
Features
- Product Material - It is made of high quality metal material to ensure its durability and stability.
- Jaws - Reversible jaws on chuck will secure blanks up to 2. 5 square x 5 long.
- Product Size - The chuck diameter is 3.25 inch, the chuck is pre threaded to 1 x 8 tpi to match your spindle.
- Usage - Thread chuck onto your lathes headstock spindle. Mount a drill bit in a drill chuck in your lathes tailstock. Advance drill bit into blank while lathe is spinning.
- Product Package- Includes one chuck body and two tightening levers to tighten and loosen the jaws.
- See more on Amazon...
Brand: marddpair | Manufacturer: marddpair
See On Amazon #4
HAowosi Woodworking Products Dedicated Pen Drilling Lathe Chuck 2-inch 2-Jaw,Pen Blank Drilling Chuck with 1" X 8TPI Direct Thread,Pen Blank Chuck for Woodturning
Asin: B0C9L43HV7 | Ean: 0761241405299 | UPC: 761241405299
The Reversible Jaws Of The Chuck Can Fix 1 "Square X 4" Long Blanks.
The Pen Blank Drilling Chuck Can Perfectly Fix The Blank And Keep It Straight And Centered,Ensuring That Drill A Perfectly Centered Hole In Your Pen Blank Directly On Your Lathe.
Features A 1” X 8 Tpi Thread For Compatibility With The Majority Of Wood Lathes On The Market.
2 Tightening Levers You Allows Easily To Tighten And Loosen The Jaws.
Features
- Pen Blank Chuck- weighs 1.43 pounds,and diameter is 2.5",Clamp Range: 8 8 to 23 23mm,Clamping square material
- 2 Tightening Levers you allows easily to tighten and loosen the jaws
- The reversible jaws of the chuck can fix 1 square x 4 long blanks
- Features a 1 x 8 TPI thread for compatibility with the majority of wood lathes on the market
- The pen blank drilling chuck can perfectly fix the blank and keep it straight and centered,ensuring that Drill a perfectly centered hole in your pen blank directly on your lathe
- See more on Amazon...
Brand: HAowosi | Manufacturer: HAowosi
See On Amazon #5
PNBO Lathe Chuck 2 Inch,2-Jaw Dedicated Pen Drilling Lathe Chuck,Wood Lathe Chuck
Asin: B094FNCGW6 | Model: 0 | PartNumber: 0 | Ean: 0657573973592 | UPC: 657573973592
【Free Accessories】:We Will Provide You 2 Tightening Levers Allows You Easily To Tighten And Loosen The Jaws..
【Wide Application】:Applicable To Pen-Making Square Material Clamping, Auxiliary Drilling, End Milling.With A 1-Inch X 8Tpi Thread, Which Is Suitable For Most Woodworking Lathes On The Market..
【High Precision Design】:This Chuck Has A Special V- Slot Design Inside The Jaw,Which Is More Suitable For Clamp Square Material. The Jaws Are Attached To The Chuck Body Through An I-Shaped Structure Which Has High Precision And Firmness..
【Applicable Workpiece Size】:The Clamping Range Of The Lathe Chuck Is Approx 8×8 To 23×23Mm For Square Shaped Material.Weights 1.43 Pounds, And 2.5" Diameter..
Features
- EXCELLENT QUALITY The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck.
- APPLICABLE WORKPIECE SIZE The clamping range of the lathe chuck is approx 8 8 to 23 23mm for square shaped material.Weights 1.43 pounds, and 2.5 diameter.
- FREE ACCESSORIES We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws.
- HIGH PRECISION DESIGN This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness.
- WIDE APPLICATION Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #6
NAGU 2-inch 2-Jaw Pen Drilling Lathe Chuck Set with 1" X 8TPI Direct Thread,Dedicated Pen Drilling Lathe Chuck
Asin: B095Y48NHN | Model: 10601 | PartNumber: 10601 | Ean: 0788489272117 | UPC: 788489272117
►Precision Design:This Chuck Has A Special V- Slot Design Inside The Jaw,Which Is More Suitable For Clamp Square Material. The Jaws Are Attached To The Chuck Body Through An I-Shaped Structure Which Has High Precision And Firmness..
►Giveaway:Includes Two Tommy Bars To Tighten And Loosen The Jaws..
►Scope Of Application:Applicable To Pen-Making Square Material Clamping, Auxiliary Drilling, End Milling.With A 1-Inch X 8Tpi Thread, Which Is Suitable For Most Woodworking Lathes On The Market..
►Applicable Size:The Clamping Range Of The Lathe Chuck Is Approx 8×8 To 23×23Mm For Square Shaped Material.Weights 1.43 Pounds, And 2.5" Diameter..
Features
- Special for Lathes The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage.
- Applicable Size The clamping range of the lathe chuck is approx 8 8 to 23 23mm for square shaped material.Weights 1.43 pounds, and 2.5 diameter.
- Precision Design This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness.
- Scope of Application Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market.
- Giveaway Includes two tommy bars to tighten and loosen the jaws.
- See more on Amazon...
Brand: NAGU | Manufacturer: NTLToolworks
See On Amazon #7
findmall Woodworking Lathe Chuck 3-1/4Inch Large Dedicated Pen Blank Drilling Lathe Chuck with 1 x 8TPI Pre-Threaded
Asin: B092D3HS7F | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6903036905322
Capacity - Use The Standard Jaw Position To Drill From 1/4 To 1. 5. Reverse The Jaws To Drill From 1. 5 To 2. 5..
Application - Drill A Perfectly Centered Hole In Your Pen Blank Or Bottle Stopper Blank Directly On Your Lathe..
Usage - Thread Chuck Onto Your Lathes Headstock Spindle; Mount A Drill Bit In A Drill Chuck In Your Lathes Tailstock; Advance Drill Bit Into Blank While Lathe Is Spinning..
Size - Reversible Jaws On Chuck Will Secure Blanks Up To 2. 5 Square X 5 Long..
Features
- Parameter - Chuck is pre-threaded to 1 x 8tpi; Weighs 2. 35 lbs; Diameter 3. 25; Includes (2) tightening levers to open and close the chuck jaws.
- Size - Reversible jaws on chuck will secure blanks up to 2. 5 square x 5 long.
- Capacity - Use the standard jaw position to drill from 1/4 to 1. 5. Reverse the jaws to drill from 1. 5 to 2. 5.
- Usage - Thread chuck onto your lathes headstock spindle; Mount a drill bit in a drill chuck in your lathes tailstock; Advance drill bit into blank while lathe is spinning.
- Application - Drill a perfectly centered hole in your pen blank or bottle stopper blank directly on your lathe.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 2.30 pounds
See On Amazon #8
PSI Woodworking PENPALXD Pen Blank Drilling Chuck Accessory Set
Asin: B09JGNL7RH | Model: PENPALXD | PartNumber: PENPALXD | Ean: 0840229914555 | UPC: 840229914555
Lathe Headstock Spindle Adapter La3418x Converts A 3/4" X 16Tpi Spindle To 1" X 8Tpi; Allows A 3/4" X 16Tpi Threaded Spindle To Accept 1" X 8Tpi Threaded Chucks, Faceplates, And Other Woodturning Tools And Accessories; Weighs .2 Lbs.
Drill Chuck Penpaldc Mounts In The Tailstock With A #1 Morse Taper Arbor; Maximum Opening Is 10 Mm; 10 Mm = 0.393701".
Dedicated Pen Blank Drilling Lathe Chuck Cscpenchk Securely Holds Pen Blanks Up To 1" X 1" X 4"; Chuck Is Pre-Threaded To 1" X 8Tpi; Weighs 1.2 Lbs; Diameter Is 2.5"; Jaws Are 2" Long; Includes (2) Tightening Levers To Open And Close The Chuck Jaws.
Includes (1) Dedicated Pen Blank Drilling Lathe Chuck, (1) Drill Chuck, And (1) Lathe Headstock Spindle Adapter.
Features
- Drill pen blanks up to 3-1/2"; Compatible with the PENPAL Mini Pen Making Lathe, or other lathes with similar headstock and tailstock mounts
- Includes (1) dedicated pen blank drilling lathe chuck, (1) drill chuck, and (1) lathe headstock spindle adapter
- Lathe Headstock Spindle Adapter LA3418X converts a 3/4 x 16tpi spindle to 1 x 8tpi; Allows a 3/4 x 16tpi threaded spindle to accept 1 x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories; Weighs .2 lbs
- Dedicated Pen Blank Drilling Lathe Chuck CSCPENCHK securely holds pen blanks up to 1 x 1 x 4; Chuck is pre-threaded to 1 x 8tpi; Weighs 1.2 lbs; Diameter is 2.5; Jaws are 2 long; Includes (2) tightening levers to open and close the chuck jaws
- Drill Chuck PENPALDC mounts in the tailstock with a #1 Morse Taper arbor; Maximum opening is 10 mm; 10 mm = 0.393701
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Weight: 2.35 pounds
Warranty: 2 Years Under Normal Use
See On Amazon
Looking For Something Else?
Search