Loctite 518 Non-Corrosive Anaerobic Gasket Maker Flange Sealant, 300 Milliliter (2096063)
Asin: B095J58GRV | Model: 2096063 | PartNumber: 2096063 | Ean: 0079340010727 | UPC: 079340010727
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fills & Seals. Fills Gaps Up To 0.050" (1.27 Mm) And Forms A Flexible, Solvent-Resistant Seal That Will Not Tear Or Decay..
Applications. Water Pumps, Thermostat Housings, Transmission Pans, Transmission Case Covers, Transaxle Casings, O-Ring Replacement..
Easy To Use. Parts Disassemble Easily, Even After Extended Service, And Old Gasket Material Can Be Removed With A Putty Knife..
Premium. Ideal For On-The-Spot And Emergency Repairs, Or When A Conventional Gasket Is Out Of Stock..
Features
- DESIGN USE. Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces.
- PREMIUM. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock.
- FILLS & SEALS. Fills gaps up to 0.050 (1.27 mm) and forms a flexible, solvent-resistant seal that will not tear or decay.
- EASY TO USE. Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife.
- APPLICATIONS. Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Warranty: No
See On Amazon Similar To Loctite 518 NonCorrosive Anaerobic Gasket
#1
Loctite 222 Threadlocker for Automotive: High-Temperature, Low-Strength, Anaerobic, One-Piece Assembly, Non-Corrosive, Locks and Seals | Purple, 6 ml Tube (PN: 38653-555339)
Asin: B0002KKTT0 | Model: 555339 | PartNumber: 555339 | Ean: 0079340386532, 7262318399426, 4684505029986 | UPC: 079340386532
Results. Secure, One-Piece Assembly That Will Not Loosen Under Stress..
Application. Carburetors, Relay Locks, Headlamps, Throttle Body Assembly, Choke Assembly And Fuel Injection Set Screws, And Much More..
Secure. Locks And Seals While Preventing Parts From Loosening Due To Vibration. Removable With Hand Tools For Disassembly. Noncorrosive..
Reliable Adhesion. Ideal For Fasteners Under 1/4-Inches (6 Mm) That Require Occasional Adjustment..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Ideal for fasteners under 1/4-Inches (6 mm) that require occasional adjustment.
- RESULTS. Secure, one-piece assembly that will not loosen under stress.
- SECURE. Locks and seals while preventing parts from loosening due to vibration. Removable with hand tools for disassembly. Noncorrosive.
- APPLICATION. Carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, and much more.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.20 x 6.50 x 3.81 inches | Weight: 0.05 pounds
See On Amazon #2
Loctite 271 Threadlocker for Automotive: High-Strength, High-Temp, Fluorescent, Anaerobic, Heavy-Duty Applications, Works on All Metals | Red, 36 ml Bottle (PN: 37479-492142)
Asin: B004DWUN5S | Model: 492142 | PartNumber: 492142 | Ean: 0079340374799 | UPC: 079340374799
Removable With Heat. Designed For Securing Parts That Must Withstand Heavy Shock, Vibration, Or Extreme Chemical Or Environmental Conditions. Localized Heating And Hand Tools Are Required To Separate Parts..
Convenient Curing. Sets In Just 10 Minutes & Is Fully Cured In 24 Hours..
Multi-Purpose Applications. Frame Brackets, Suspension Fasteners, Shock Absorber Mounts, Wheel Studs. Ideal For As-Received Fasteners Up To 1" (25 Mm) In Size..
Reliable Adhesion. Works On All Metals, Including Passive Substrates (E.G. Stainless Steel, Aluminum, Plated Surfaces) With Improved Oil Tolerance..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) with improved oil tolerance.
- REMOVABLE WITH HEAT. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts.
- MULTI-PURPOSE APPLICATIONS. Frame brackets, suspension fasteners, shock absorber mounts, wheel studs. Ideal for as-received fasteners up to 1 (25 mm) in size.
- CONVENIENT CURING. Sets in just 10 minutes & is fully cured in 24 hours.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.10 x 6.25 x 2.25 inches | Weight: 0.10 Pounds
See On Amazon #3
Loctite 268 Red Threadlocker Glue Stick: All-Purpose, High-Strength, Anaerobic, for Heavy-Duty Applications, Works on All Metals | Red, 9 Gram Wax Stick (PN: 37701-511537)
Asin: B0053ZNNC4 | Model: 511537 | PartNumber: 511537 | Ean: 0079340377011, 0826732897349 | UPC: 826732897349, 079340377011
Brand: Loctite | Manufacturer: Loctite
Dimensions: 0.90 x 6.50 x 3.81 inches | Weight: 0.05 pounds
See On Amazon #4
Loctite 88442 Red 272 High Temperature/Strength Thread Locker, 50 mL Bottle
Asin: B00B749E1O | Model: 88442 | PartNumber: 88442 | Ean: 0079340272408 | UPC: 079340272408
Threadlocking Strength: High.
Color: Red.
Loctite Number: 272.
Brand: Loctite | Manufacturer: Loctite
Dimensions: 5.04 x 2.36 x 0.98 inches | Weight: 0.11 pounds
See On Amazon #5
LOCTITE 242 Threadlocker for Automotive: High-Temp, Medium-Strength, Anaerobic | Red, 6mL Tube (PN: 37418 - 487229)
Asin: B000FIXQXK | Model: 487229 | PartNumber: 487229 | Ean: 0079340374188 | UPC: 079340374188
Removable With Hand Tools. Well Suited For Automotive And Other Applications Where Maintenance Or Servicing Is Required..
Convenient Curing. Sets In Just 5 Minutes & Is Fully Cured In 24 Hours..
Multi-Purpose Applications. Valve Cover Bolts, Water Pump Bolts, Oil Pan Bolts, Drive Shaft Bolts, Rocker Arm Adjustment Nuts, Carburetor Studs. Ideal For All Nut And Bolt Applications ¼" To ¾" (6 Mm To 19 Mm). Eliminates The Need For Stocking Expensive Lock Nuts And Lock Washers..
Reliable Adhesion. Works On All Metals, Including Passive Substrates (E.G. Stainless Steel, Aluminum, Plated Surfaces)..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces).
- REMOVABLE WITH HAND TOOLS. Well suited for automotive and other applications where maintenance or servicing is required.
- MULTI-PURPOSE APPLICATIONS. Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs. Ideal for all nut and bolt applications to (6 mm to 19 mm). Eliminates the need for stocking expensive lock nuts and lock washers.
- CONVENIENT CURING. Sets in just 5 minutes & is fully cured in 24 hours.
- See more on Amazon...
First Available: 09/19/2016
Brand: Loctite | Manufacturer: Loctite
Dimensions: 0.80 x 6.50 x 3.81 inches | Weight: 0.05 pounds
See On Amazon #6
Loctite 21448 Green 638 High Strength Retaining Compound, 50 mL Bottle
Asin: B000O01EV0 | Model: 21448 | PartNumber: 21448 | Ean: 0079340006393, 0079340214484 | UPC: 079340214484, 079340006393
Item Package Width: 1.99999999796".
Item Package Height: 1.099999998878".
Item Package Length: 5.99999999388".
Features
- Approvals: Canadian Food Inspection Agency (CFIA)
- Item Package Length: 5.99999999388
- Item Package Width: 1.99999999796
- Item Package Height: 1.099999998878
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 12.00 x 1.00 x 1.00 inches | Weight: 0.18 pounds
See On Amazon #7
Loctite Gasket Sealant,50mL,Red,Paste
Asin: B01M9EY8FE | Model: 2096059 | PartNumber: 2096059 | Ean: 0079340010710, 0079340010772, 0079340107724, 0079340373945 | UPC: 079340010772, 079340373945, 079340010710, 079340107724
Country Of Manufacturer: United States.
Package Dimensions: 6.1" L X 2.2" W X 1.5" H.
Manufacturer: Loctite.
Features
- Threadlockers and Gasket Sealants
- Manufacturer: Loctite
- Country of Manufacturer: United States
- Package Dimensions: 6.1 L x 2.2 W x 1.5 H
- See more on Amazon...
First Available: 09/09/2017
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.20 x 8.00 x 3.81 inches | Weight: 0.14 pounds
Warranty: No
See On Amazon #8
Loctite 272 Threadlocker for Automotive: High-Strength, High-Temperature, Anaerobic, Heavy-Duty Applications, Works on All Metals | Red, 36 ml Bottle (PN: 37480-492143)
Asin: B0002KKTR2 | Model: 492143 | PartNumber: 492143 | Ean: 0079340374805 | UPC: 079340374805
Removable With Heat. Designed For Securing Parts That Must Withstand Heavy Shock, Vibration, Or Extreme Chemical Or Environmental Conditions. Localized Heating And Hand Tools Are Required To Separate Parts..
Convenient Curing. Sets In Just 1 Hour & Is Fully Cured In 24 Hours..
Multi-Purpose Applications. Camshaft Sprocket Bolts, Crankshaft Bolts, Idler Bearings, Press Fit Filler Tubes, Transmission Input And Output Shaft Threads, Ring Gear, And Shock Bolts. Ideal For As Received Fasteners Up To 1-1/2" (38 Mm) In Size..
Reliable Adhesion. Works On All Metals, Including Passive Substrates (E.G. Stainless Steel, Aluminum, Plated Surfaces) With Improved Oil Tolerance..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) with improved oil tolerance.
- REMOVABLE WITH HEAT. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts.
- MULTI-PURPOSE APPLICATIONS. Camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads, ring gear, and shock bolts. Ideal for as received fasteners up to 1-1/2 (38 mm) in size.
- CONVENIENT CURING. Sets in just 1 hour & is fully cured in 24 hours.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.10 x 6.25 x 2.25 inches | Weight: 0.15 pounds
See On Amazon #9
Loctite 51001 C5-A Copper Based Anti-Seize Lubricant, 1 oz. Tube
Asin: B001HW6QA8 | Model: 442-51001 | PartNumber: 442-51001 | Ean: 0079340510012 | UPC: 079340510012
Item Package Dimension: 8.5" L X 6.0" W X 5.5" H.
Item Package Weight: 4.14 Lb.
Model Number: 442-51001.
Features
- Country Of Origin: United States
- Model Number: 442-51001
- Item Package Dimension: 8.5 L x 6.0 W x 5.5 H
- Item Package Weight: 4.14 lb
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 5.80 x 8.50 x 5.80 inches | Weight: 0.07 pounds
Warranty: Manufacturer
See On Amazon #10
LOCTITE Black RTV 598 High Performance Silicone Gasket Maker: Sensor-Safe, Non-Corrosive, Fast Curing, High Flexibility, Oil Resistant | Black, 80 ml Tube (PN: 37467-491985)
Asin: B000FW7V3C | Model: 491985 | PartNumber: 491985 | Ean: 0079340374676 | UPC: 079340374676
Flexible. High-Quality Construction And Durability..
Oil Resistance. Tolerates Minor Contamination By Oils (E.G. Motor Oils, Corrosion Protection Oils, Cutting Fluids)..
High Quality. Top Quality Products To Enhance The Style, Comfort And Functionality Of Your Vehicle..
Rreliable Adhesion. Sensor Safe, Low Odor, Non-Corrosive, Fast-Curing..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RRELIABLE ADHESION. Sensor Safe, low odor, non-corrosive, Fast-curing.
- FLEXIBLE. High-quality construction and durability.
- HIGH QUALITY. Top quality products to enhance the style, comfort and functionality of your vehicle.
- OIL RESISTANCE. Tolerates minor contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids).
- See more on Amazon...
First Available: 02/10/2005
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.00 x 8.00 x 4.00 inches
See On Amazon #11
Loctite 515 Gasket Maker & Flange Sealant for Automotive: High-Temperature, Medium-Strength, Anaerobic, Works on All Metals, Flexes with Movement | Purple, 50 ml (PN: 555352)
Asin: B0002KKTTA | Model: 555352 | PartNumber: 555352 | Ean: 0777714719855, 0079340386556, 0826732886886 | UPC: 826732886886, 079340386556, 777714719855
Flexible. Adds Flexibility To Rigid Machined Flanges That Move In Service & Eliminates The Need For Preformed, Paper, Rubber & Cork Gaskets..
Convenient Curing. With Primer, Sets In 15M – 2Hrs. Without Primer, Sets In 1-12Hrs. For Use On Close-Fitting Flanged Parts With Gaps Up To 0.25 Mm (0.01 In)..
Easily Removable. Well Suited For Automotive And Other Applications Such As Water Pumps, Thermostat Housings, Transmission Pans, Transmission Case Covers, Transaxle Casings, And O-Ring Replacement..
Reliable Adhesion. Works On All Metals, Including Passive Substrates (E.G. Stainless Steel, Aluminum, Plated Surfaces) & Tolerates Minor Contamination By Oils (E.G. Motor Oils, Corrosion Protection Oils, Cutting Fluids)..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) & tolerates minor contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids).
- FLEXIBLE. Adds flexibility to rigid machined flanges that move in service & eliminates the need for preformed, paper, rubber & cork gaskets.
- EASILY REMOVABLE. Well suited for automotive and other applications such as water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, and O-ring replacement.
- CONVENIENT CURING. With primer, sets in 15m 2hrs. Without primer, sets in 1-12hrs. For use on close-fitting flanged parts with gaps up to 0.25 mm (0.01 in).
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.20 x 8.00 x 3.81 inches | Weight: 0.14 pounds
See On Amazon #12
LOCTITE 680 High Strength Bearing Mount For Relaxed Fits, O.E.M. Specified, Anaerobic, High Strength, Medium Viscosity, Slip Fit Assemblies | 36 ml. Bottle (PN: 2301375)
Asin: B086638DFK | Model: 2301375 | PartNumber: 2301375 | Ean: 0079340012332 | UPC: 079340012332
Resistant. Replaces Set Screws, Clamp Rings, Snap Rings, Wheel Bearings, Idler Shaft, Fit Bearings..
Easy To Use. Adheres In 10 Minutes At Room Temperature. Seal Joints To Stop Leakage And Prevent Fretting And Corrosion..
Formulated. Selection Of Viscosity, Gap-Filling Ability, Flexibility And Strength Characteristics..
Reliable Adhesion. High Strength, Medium Viscosity Anaerobic Adhesive For Slip Fit Assemblies..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. High strength, medium viscosity anaerobic adhesive for slip fit assemblies.
- RESISTANT. Replaces set screws, clamp rings, snap rings, wheel bearings, idler shaft, fit bearings.
- FORMULATED. Selection of viscosity, gap-filling ability, flexibility and strength characteristics.
- EASY TO USE. Adheres in 10 minutes at room temperature. Seal joints to stop leakage and prevent fretting and corrosion.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.10 x 6.25 x 2.25 inches | Weight: 0.18 pounds
See On Amazon #13
LOCTITE 242 Threadlocker for Automotive: High-Temp, Medium-Strength, Anaerobic, All Purpose TYPICAL APPLICATIONS, Works on all Metals| Blue, 36 ml Bottle (PN: 37477 - 492140)
Asin: B000XSGJKY | Model: 492140 | PartNumber: 492140 | Ean: 0079340374775 | UPC: 079340374775
Removable With Hand Tools. Well Suited For Automotive And Other Applications Where Maintenance Or Servicing Is Required..
Convenient Curing. Sets In Just 5 Minutes & Is Fully Cured In 24 Hours..
Multi-Purpose Applications. Great For Valve Cover Bolts, Water Pump Bolts, Oil Pan Bolts, Drive Shaft Bolts, Rocker Arm Adjustment Nuts, Carburetor Studs. Ideal For All Nut And Bolt Applications ¼" To ¾" (6 Mm To 19 Mm). Eliminates The Need For Stocking Expensive Lock Nuts And Lock Washers..
Reliable Adhesion. Works On All Metals, Including Passive Substrates (E.G. Stainless Steel, Aluminum, Plated Surfaces)..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces).
- REMOVABLE WITH HAND TOOLS. Well suited for automotive and other applications where maintenance or servicing is required.
- MULTI-PURPOSE APPLICATIONS. Great for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs. Ideal for all nut and bolt applications to (6 mm to 19 mm). Eliminates the need for stocking expensive lock nuts and lock washers.
- CONVENIENT CURING. Sets in just 5 minutes & is fully cured in 24 hours.
- See more on Amazon...
First Available: 09/19/2016
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.10 x 6.25 x 2.25 inches | Weight: 0.14 Pounds
See On Amazon #14
LOCTITE 518 Gasket Maker & Flange Sealant for Automotive: Anaerobic, Medium-Strength, Non-Corrosive, Flexes with Movement, Solvent-Resistant | Red, 6 ml Tube (PN: 2203452-2096064)
Asin: B07FKS7T7X | Model: 2203452 | PartNumber: 2203452 | Ean: 0079340011663 | UPC: 079340011663
Flexible. Enhances Load Bearing & Shock Absorbing Characteristics Of The Bond Area. Typically Used For Water Pumps, Thermostat Housings, Transmission Pans, Transmission Case Covers, Transaxle Casings, O-Ring Replacement. Replaces Almost Any Cut Gasket Or Coat Pre-Cut Gaskets To Increase Reliability..
Convenient Curing. 30 Minutes To 4 Hours With Primer. 4 - 24 Hours Without Primer. Cure Speed Will Depend On The Substrate Used..
Removable With Hand Tools. Parts Disassemble Easily, Even After Extended Service, And Old Gasket Material Can Be Removed With A Putty Knife..
Reliable Adhesion. Forms A Flexible, Solvent-Resistant Seal That Will Not Tear Or Decay. Primarily For Use On Aluminum, Iron & Steel Flanged Mating Surfaces..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Forms a flexible, solvent-resistant seal that will not tear or decay. Primarily for use on aluminum, iron & steel flanged mating surfaces.
- FLEXIBLE. Enhances load bearing & shock absorbing characteristics of the bond area. Typically used for Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement. Replaces almost any cut gasket or coat pre-cut gaskets to increase reliability.
- REMOVABLE WITH HAND TOOLS. Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife.
- CONVENIENT CURING. 30 minutes to 4 hours with primer. 4 - 24 hours without primer. Cure speed will depend on the substrate used.
- See more on Amazon...
First Available: 07/13/2018
Brand: Loctite | Manufacturer: Loctite
Dimensions: 6.50 x 0.50 x 3.38 inches
See On Amazon #15
Loctite 565 442-56507 6ml PST Thread Sealant, Controlled Strength, White Color
Asin: B000O05CS6 | Model: 234438 | PartNumber: 234438 | Ean: 0079340565074 | UPC: 079340565074
Model Number:234438.
Package Dimensions: 1 L X 1 W X 12 H Inches.
Controlled Strength For Ease Of Diassembly.
Features
- A general purpose instant sealant for tapered and straight/tapered fittings
- Controlled strength for ease of diassembly
- Model Number:234438
- Package Dimensions: 1 L x 1 W x 12 H inches
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 12.00 x 1.00 x 1.00 inches | Weight: 0.02 pounds
See On Amazon #16
LOCTITE 263 Threadlocker for Automotive: High-Strength, Oil Tolerant, High-Temperature, Fluorescent, Anaerobic, Heavy Duty Applications | Red, 36 ml. Bottle (PN: 44068-2205310)
Asin: B07FKJVH6P | Model: 2205310 | PartNumber: 2205310 | Ean: 0079340011656 | UPC: 079340011656
Removable With Heat. Designed For Securing Parts That Must Withstand Heavy Shock, Vibration, Or Extreme Chemical Or Environmental Conditions. Localized Heating And Hand Tools Are Required To Separate Parts..
Convenient Curing. Sets In Just 10 Minutes & Is Fully Cured In 24 Hours..
Multi-Purpose Applications. Assembly With Air Tools, Cylinder Block Bolts, Ring Gear Bolts, And Transmission Shaft Bolts. Ideal For As-Received Fasteners Up To 1" (25 Mm) In Size..
Reliable Adhesion. Works On All Metals, Including Passive Substrates (E.G. Stainless Steel, Aluminum, Plated Surfaces) With Improved Oil Tolerance..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) with improved oil tolerance.
- REMOVABLE WITH HEAT. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts.
- MULTI-PURPOSE APPLICATIONS. Assembly with air tools, cylinder block bolts, ring gear bolts, and transmission shaft bolts. Ideal for as-received fasteners up to 1 (25 mm) in size.
- CONVENIENT CURING. Sets in just 10 minutes & is fully cured in 24 hours.
- See more on Amazon...
First Available: 07/13/2018
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.00 x 5.00 x 2.00 inches | Weight: 0.10 pounds
See On Amazon #17
Loctite 1835201 Green 680 Retaining Compound, 50 mL Bottle
Asin: B00KC541DA | Model: 1835201 | PartNumber: 1835201 | Ean: 0079340006843 | UPC: 079340006843
Allows Relaxed Machining Tolerances, And Replaces Clamp Rings, Set Screws, And Snap Rings.
Recommended For Retaining Shafts, Gears, Pulleys And Similar Cylindrical Parts.
Used To Join Fitted Cylindrical Parts.
Features
- High strength, high viscosity room temperature curing adhesive
- Used to join fitted Cylindrical parts
- Allows relaxed machining tolerances, and replaces Clamp Rings, set screws, and snap Rings
- Recommended for retaining shafts, gears, pulleys and similar Cylindrical parts
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 6.30 x 2.30 x 1.10 inches | Weight: 0.18 Pounds
See On Amazon #18
LOCTITE 262 Threadlocker for Automotive: High-Strength, Oil Tolerant, High-Temp, Anaerobic, Permanent, Works on all Metals | Red, 6 ml Tube (PN: 37420 - 487231)
Asin: B000WJZ86K | Model: 487231 | PartNumber: 487231 | Ean: 0079340374201 | UPC: 079340374201
Removable With Heat. Designed For Securing Parts That Must Withstand Heavy Shock, Vibration, Or Extreme Chemical Or Environmental Conditions. Localized Heating And Hand Tools Are Required To Separate Parts..
Convenient Curing. Sets In Just 5 Minutes & Is Fully Cured In 24 Hours..
Multi-Purpose Applications. Assembly With Air Tools, Cylinder Block Bolts, Ring Gear Bolts, And Transmission Shaft Bolts. Ideal For Fasteners Up To ¾" (19 Mm) In Size Before Assembly..
Reliable Adhesion. Works On All Metals, Including Passive Substrates (E.G. Stainless Steel, Aluminum, Plated Surfaces) With Improved Oil Tolerance..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) with improved oil tolerance.
- REMOVABLE WITH HEAT. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts.
- MULTI-PURPOSE APPLICATIONS. Assembly with air tools, cylinder block bolts, ring gear bolts, and transmission shaft bolts. Ideal for fasteners up to (19 mm) in size before assembly.
- CONVENIENT CURING. Sets in just 5 minutes & is fully cured in 24 hours.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 0.80 x 6.50 x 3.81 inches | Weight: 0.00 Pounds
See On Amazon #19
LOCTITE 1158514 Head Bolt and Water Jacket Sealant: Thread Selant, Single Component Anaerobic Hybrid, Eliminates Corrosion, Prevents Premature Loosening | 50 ml. Tube
Asin: B004QXL4F2 | Model: 1158514 | PartNumber: 1158514 | Ean: 0094714287826, 0079340432093, 0795871517770 | UPC: 795871517770, 094714287826, 079340432093
Eliminates Corrosion Which Can Cause Difficulties If Future Disassembly Is Required.
Oem Specified. Our Loctite Automotive Aftermarket Products Are Not Just Oem-Specified, They Are Also Designed By Auto Manufacturers And Lab Tested. Wherever Engines Are Being Built Or Repaired, Loctite Is Trusted By Professionals..
Multi-Purpose Applications Include Headbolts, Water Pump Bolts, Thermostat Housings, Intake Manifold Bolts, Temperature Sensors.
Resistant. Seals The Gaps Between The Threads And Prevents Premature Loosening..
Features
- RELIABLE SEALING. Lubricates fasteners during assembly
- RESISTANT. Seals the gaps between the threads and prevents premature loosening.
- ELIMINATES CORROSION which can cause difficulties if future disassembly is required
- MULTI-PURPOSE APPLICATIONS include headbolts, water pump bolts, thermostat housings, intake manifold bolts, temperature sensors
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.38 x 4.50 x 1.38 inches | Weight: 0.11 pounds
See On Amazon #20
Loctite 620 High-Temperature Bearing Mount Retaining Compound: High Viscosity, Seals Against Leakage, High-Strength, Locks and Secures Cylindrical Assembliesl| 36 ml, Bottle (PN: 555338)
Asin: B00070LQWE | Model: 555338 | PartNumber: 555338 | Ean: 0079340386525 | UPC: 079340386525
Tight Seal. Seals Against Leakage. Prevents Metal Fretting And Corrosion..
Strong. Provides A Shear Strength Of Over 3,800 Psi On Steel..
Reliable Adhesion. High Viscosity Liquid Retaining Compound..
Features
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. High viscosity liquid retaining compound.
- TIGHT SEAL. Seals against leakage. Prevents metal fretting and corrosion.
- STRONG. Provides a shear strength of over 3,800 psi on steel.
- See more on Amazon...
Brand: Loctite | Manufacturer: Loctite
Dimensions: 1.10 x 6.25 x 2.25 inches
See On Amazon
Looking For Something Else?
Search