Case Club 1911 & 6 Magazine Pre-Cut Heavy Duty Waterproof Pistol Case (Accommodates under barrel attachment)
Asin: B095XP1751 | Ean: 0850031432079 | UPC: 850031432079
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Outside Ribs On The Case Deflect Impact When Being Shipped And Wide Latches Allow The Case To Be Opened With Thick Gloves. A Manual Pressure Release Valve Will Allow You To Equalize The Atmospheric Pressure When Traveling To Higher Elevation..
The Pistol, Magazines, And Padlocks Are Not Included. This Item Is Just The Case With Pre-Cut Foam..
The Inside Foam Is Military Grade Closed Cell Polyethylene Which Can Be Wiped Down If It Gets Wet Or Oily. Don't Settle For A Flimsy Case With Pluck Foam. This Case Is Laser Cut Ready To Go Specifically For Your 1911 Handgun. Perfect For Offroaders, Campers, Concealed Permit Holders, Law Enforcement & Safe Weapon Storage..
The Case Is Waterproof, Dustproof And Crushproof With A Lifetime Warranty. It Is Airline Approved For Checked Luggage And Legal For Vehicle Transport In All 50 States. 2 Metal Reinforced Padlock Holes Will Take A Customer Supplied Padlock And Ensures Nobody Gets In Without Authorization. Fold Down Handle Stays Out Of The Way When Not In Use & Has A Molded Texture Which Provides A Comfortable Grip. Built In Lid-Stay Ensures The Lid Stays Upright When Open And Metal Pins Make The Hinges Robust..
Features
- Pre-cut foam fits a 1911 Pistol (check the size diagram image for compatibility), plus 6 single stack magazines (+1 in the magwell). There are also perforations below the barrel that can be cut out to accommodate a flashlight or laser attachment.
- The case is waterproof, dustproof and crushproof with a lifetime warranty. It is airline approved for checked luggage and legal for vehicle transport in all 50 states. 2 metal reinforced padlock holes will take a customer supplied padlock and ensures nobody gets in without authorization. Fold down handle stays out of the way when not in use & has a molded texture which provides a comfortable grip. Built in lid-stay ensures the lid stays upright when open and metal pins make the hinges robust.
- Outside ribs on the case deflect impact when being shipped and wide latches allow the case to be opened with thick gloves. A manual pressure release valve will allow you to equalize the atmospheric pressure when traveling to higher elevation.
- The inside foam is military grade closed cell polyethylene which can be wiped down if it gets wet or oily. Don't settle for a flimsy case with pluck foam. This case is laser cut ready to go specifically for your 1911 Handgun. Perfect for offroaders, campers, concealed permit holders, law enforcement & safe weapon storage.
- The pistol, magazines, and padlocks are not included. This item is just the case with pre-cut foam.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 4.75 x 10.50 x 9.50 Inches
See On Amazon Similar To Case Club 1911 6
#1
Case Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-3)
Asin: B00K7LGLRS | Model: 5 Pistol Case | PartNumber: 5 Pistol Case | Ean: 0856792005088 | UPC: 856792005088
Two Metal Reinforced Padlock Points That Support A Customer Supplied Padlock With A 1/4" Shackle Along With One Way Hinge Pins Ensure Your Gear Remains Safe And Secure..
Exterior Dimensions: 17.5" X 14.25" X 7.5".
Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Gen-3 Updates Include: Improved (User Friendly) Clamp Latches, Improved Heavy Duty Carry Handle With Molded Rubber Grip And Finger Grooves, Metal Reinforced Padlock Holes, Updated Pressure Release Valve And Sleeker Exterior Case Shell.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil..
Easily Convert The Case From A 5 Pistol Version To A 4 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 5 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations For The Price Of One!.
Features
- Holds 5 pistols, 20 magazines (+5 more in the magwells) & comes with a rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage.
- Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 5 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Two metal reinforced padlock points that support a customer supplied padlock with a 1/4 shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil.
- Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Gen-3 updates include: improved (user friendly) clamp latches, improved heavy duty carry handle with molded rubber grip and finger grooves, metal reinforced padlock holes, updated pressure release valve and sleeker exterior case shell
- Exterior Dimensions: 17.5 x 14.25 x 7.5
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 7.48 x 19.75 x 15.53 inches
See On Amazon #2
Case Club 6 Pistol and 21 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7LFJN0 | Model: 6 Pistol Case | PartNumber: 6 Pistol Case | Ean: 0856792005095 | UPC: 856792005095
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used Even With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 6 Pistol Version To A 5 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 6 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations!.
Case Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 6 pistols, 21 magazines (+6 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 6 pistol version to a 5 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 6 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used even with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #3
Case Club 8 Pistol and 12 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust
Asin: B08YJ5WS1Q | Model: 8 Pistol Case | PartNumber: 8 Pistol Case | Ean: 0850021069810 | UPC: 850021069810
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Case Is Ideal For Police Departments, Military, Firearm Instructors & Those Who Have Large Pistol Collections..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 8 semi-auto pistols, 12 magazines (+8 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #4
Case Club 24 Magazine Holder .50 Cal Ammo Can Foam (Pre-Cut, Closed Cell, Military Grade Foam) (1 Count)
Asin: B00X81D98S | Ean: 0856792005361 | UPC: 856792005361
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean.
Set Includes 3 Pieces. Soft Lid Foam, Denser Base Foam With Cutouts, Dense Flatpad For The Bottom.
Holds 24 Magazines (Both Single Stack & Double Stack).
Features
- Foam only, ammo can is NOT included with order, Foam Dimensions: 11"x5.625"
- Holds 24 magazines (both single stack & double stack)
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Set includes 3 pieces. Soft lid foam, denser base foam with cutouts, dense flatpad for the bottom
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 6.70 x 14.90 x 10.20 Inches | Weight: 0.35 pounds
See On Amazon #5
Case Club 4 Pistol and 16 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7L4GXY | Model: 4 Pistol Case | PartNumber: 4 Pistol Case | Ean: 0856792005071 | UPC: 856792005071
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 4 Pistol Version To A 3 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 4 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 4 pistols, 16 magazines (+4 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two metal reinforced padlock points that support a customer supplied padlock with a 0.3" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 4 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club
See On Amazon #6
Case Club 3 Pistol & Accessory & Up to 23 Magazines Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust (Gen 2)
Asin: B00K7K66CY | Model: 3 Pistol & Accessory Case | PartNumber: 3 Pistol & Accessory Case | Ean: 0856792005057 | UPC: 856792005057
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 3 Pistol & Accessory Version To A 3 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 17 While Adding Both Modules Increases It To 23. Quickly Convert It Back To The 3 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 3 pistols and (up to) 23 magazines with magazine modules or 9 magazines with accessory pocket (+3 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 17 while adding both modules increases it to 23. Quickly convert it back to the 3 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club
See On Amazon #7
Case Club 6 Pistol & 20 Magazine Case with Accessory Pocket. Pre-Cut, Heavy Duty, Waterproof, with Silica Gel for Gun Rust Prevention (Upgraded Gen-2)
Asin: B00K7KQS5O | Model: 6 Pistol & Accessory Case | PartNumber: 6 Pistol & Accessory Case | Ean: 0856792005064 | UPC: 856792005064
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 6 Pistol & Accessory Version To A 6 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 12 While Adding Both Modules Increases It To 20. Quickly Convert It Back To The 6 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack, Getting A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 6 pistols and up to 20 magazines (when used with magazine modules), or 6 pistols, 8 mags, and an accessory pocket (when magazine modules are removed). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack, getting a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer lengths.
- Easily convert the case from a 6 pistol & accessory version to a 6 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 12 while adding both modules increases it to 20. Quickly convert it back to the 6 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #8
Case Club 2 Pistol & 18 Magazine Case with Accessory Pocket. Pre-Cut, Heavy Duty, Waterproof with Silica Gel for Gun Rust Prevention (Upgraded Gen-2)
Asin: B00K7JHWD2 | Ean: 0856792005040 | UPC: 856792005040
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 2 Pistol Accessory Version To A 2 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Module. Adding The Module Increases Magazine Capacity To 18. Quickly Convert It Back To The 2 Pistol With Larger Accessory Pocket Version Anytime By Removing The Module. Dual Purpose Foam Design Allows For Two Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 2 pistols and (up to) 18 magazines with magazine module or 6 magazines with expanded accessory pocket (+2 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 2 pistol accessory version to a 2 pistol with increased magazine capacity version by adding/leaving in, the magazine module. Adding the module increases magazine capacity to 18. Quickly convert it back to the 2 pistol with larger accessory pocket version anytime by removing the module. Dual purpose foam design allows for two different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #9
Case Club 5 Pistol & (up to) 30 Magazine Case with Accessory Pocket. Pre-Cut, Heavy Duty, Waterproof, with Silica Gel for Gun Rust Prevention (Upgraded Gen-2)
Asin: B00K7M261M | Model: 5 Pistol & Accessory Case | PartNumber: 5 Pistol & Accessory Case | Ean: 0856792005101 | UPC: 856792005101
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 5 Pistol & Accessory Version To A 5 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 26 While Adding Both Modules Increases It To 30. Quickly Convert It Back To The 5 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 5 pistols and (up to) 30 magazines with magazine modules or 18 magazines with accessory pocket (+5 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 26 while adding both modules increases it to 30. Quickly convert it back to the 5 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #10
Case Club Case Fits Ruger Precision Rifle. Pre-Cut, Waterproof, with Accessory Box and Silica Gel to Help Prevent Gun Rust
Asin: B088HK5SJQ
Please Refer To Diagram Image To Make Sure Your Rifle Will Fit. Fits Scope (Within A 3.70" Height). Fits Palm Shelf. Fits Bipod. Fits Under Barrel Attachments. Fits Bolt In Or Out Of The Gun..
Case Is Airline Approved For Checked Luggage, Padlockable, Wheeled, Fully Shippable & Dustproof. Case Is Ata Approved And Can Be Shipped..
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean..
Stainless Steel Added To Padlock Points For Added Security. Orange Peel Texture Added To Exterior Finish To Minimize Scratches. Structural Ribs Added To Outside Of Case For Increased Durability. Long Front Handle Length To Help Counter Balance Off Center Weighted Loads. Wide Bodied Snap Latches That Can Be Used With Gloves..
Features
- Waterproof wheeled case comes with pre-cut foam to hold your Ruger Precision with folding stock along with one pistol, 4 extra pistol magazines, 3-5 extra rifle magazines, included silica gel canister, included waterproof box, bolt if desired & various accessories.
- Stainless steel added to padlock points for added security. Orange peel texture added to exterior finish to minimize scratches. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves.
- Please refer to diagram image to make sure your rifle will fit. Fits scope (within a 3.70 height). Fits Palm Shelf. Fits bipod. Fits under barrel attachments. Fits bolt in or out of the gun.
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean.
- Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Case is ATA approved and can be shipped.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #11
Case Club 4 Pistol and (up to) 29 Magazine with Accessory Pocket Pre-Cut Heavy Duty Waterproof Case with Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7ENO6G | Ean: 0856792005019 | UPC: 856792005019
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 4 Pistol & Accessory Version To A 4 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 21 While Adding Both Modules Increases It To 29. Quickly Convert It Back To The 4 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 4 pistols and (up to) 29 magazines with magazine modules or 12 magazines with accessory pocket (+5 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 4 pistol & accessory version to a 4 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 21 while adding both modules increases it to 29. Quickly convert it back to the 4 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #12
Case Club 8 Revolver/Semi-Auto Pre-Cut Waterproof Case with Accessory Pocket & Silica Gel to Help Prevent Gun Rust
Asin: B07QXMG9ZD | Ean: 0850939008581 | UPC: 850939008581
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean.
Max Length Of Revolvers Is 12.9 Inches. Does Not Accommodate Scopes Or Underbarrel Attacments..
Case Is Airline Approved For Checked Luggage & Padlockable.
Case Has A Lifetime Warrenty & Is 100% Waterproof, & Dustproof.
Features
- Holds up to 8 revolvers or semi-auto pistols with accessory pocket & included silica gel
- Case has a lifetime warrenty & is 100% Waterproof, & Dustproof
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Case is Airline Approved for checked luggage & padlockable
- Max length of revolvers is 12.9 inches. Does not accommodate scopes or underbarrel attacments.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #13
Case Club 7 Pistol and 14 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K8BB8ZM | Model: 7 Pistol Case | PartNumber: 7 Pistol Case | Ean: 0856792005118 | UPC: 856792005118
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Case Is Ideal For Police Departments, Military, Firearm Instructors & Those Who Have Large Pistol Collections..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 7 semi-auto pistols, 14 magazines (+7 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #14
Case Club Single Pistol Pre-Cut Waterproof Case (Gen 2)
Asin: B071VN4C4T | Model: Case Club Single Pistol | PartNumber: Case Club Single Pistol | Ean: 0856792005903 | UPC: 856792005903
Do Not Settle For Cheap And Flimsy Diced Foam! Diced Foam Tears Easily, Retains Water (Rust!), Collects Dirt, And Even If Left Untouched Will Eventually Disintigrate Right Into Your Gun! Case Club Foam Is Closed-Cell Military-Grade Polyethylene, Which Does Not Absorb Liquids, Does Not Tear Easily, Lasts A Lifetime, Can Be Cleaned Easily, And Will Not Disintigrate..
Max Length Of Pistols Is 8 5/8" & Not Intended For Revolvers.
Can Accommodate Under Barrel Attachments.
Case Has A Lifetime Warrenty & Is 100% Waterproof, & Dustproof.
Features
- The foam is already Pre-Cut to fit a pistol, so the customization work is already done for you! The case holds 1 semi-auto handgun & 2 extra magazines (see "Pre-Cut Diagram" image for where the foam is pre-cut)
- Case has a lifetime warrenty & is 100% Waterproof, & Dustproof
- DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does NOT tear easily, lasts a lifetime, can be cleaned easily, and will NOT disintigrate.
- Can accommodate under barrel attachments
- Max length of pistols is 8 5/8 & not intended for revolvers
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 6.00 x 12.00 x 10.00 Inches
See On Amazon #15
Case Club 4 Revolver Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust
Asin: B00X69Z9YY | Ean: 0856792005217 | UPC: 856792005217
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean.
Max Length Of Revolvers Is 12 1/4.
Case Is Airline Approved For Checked Luggage & Padlockable.
Case Has A Lifetime Warranty & Is 100% Waterproof, & Dustproof.
Features
- Holds up to 4 revolvers & included silica gel
- Case has a lifetime warranty & is 100% Waterproof, & Dustproof
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Case is Airline Approved for checked luggage & padlockable
- Max length of revolvers is 12 1/4
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #16
Case Club 10 Pistol Pre-Cut Waterproof Case with Silica Gel x2 to Help Prevent Gun Rust (Non-Wheeled)
Asin: B01G7JEZBC | Ean: 0856792005651 | UPC: 856792005651
Do Not Settle For Cheap And Flimsy Diced Foam! Diced Foam Tears Easily, Retains Water (Rust!), Collects Dirt, And Even If Left Untouched Will Eventually Disintigrate Right Into Your Gun! Case Club Foam Is Closed-Cell Military-Grade Polyethylene, Which Does Not Absorb Liquids, Does Not Tear Easily, Lasts A Lifetime, Can Be Cleaned Easily, And Will Not Disintegrate..
Max Length Of Pistols Is 8 5/8" & Not Intended For Revolvers.
Case Is Airline Approved For Checked Luggage & Padlockable.
Case Has A Lifetime Warranty & Is 100% Waterproof & Dustproof.
Features
- Holds up to 10 pistols with 20 additional magazines & 2 included silica gel
- Case has a lifetime warranty & is 100% Waterproof & Dustproof
- DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does NOT tear easily, lasts a lifetime, can be cleaned easily, and will NOT disintegrate.
- Case is Airline Approved for checked luggage & padlockable
- Max length of pistols is 8 5/8 & not intended for revolvers
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #17
Case Club 10 Pistol Pre-Cut Waterproof Case with 2 Silica Gel Canisters to Help Prevent Gun Rust (Wheeled)
Asin: B07WJJ19G6
Do Not Settle For Cheap And Flimsy Diced Foam! Diced Foam Tears Easily, Retains Water (Rust!), Collects Dirt, And Even If Left Untouched Will Eventually Disintigrate Right Into Your Gun! Case Club Foam Is Closed-Cell Military-Grade Polyethylene, Which Does Not Absorb Liquids, Does Not Tear Easily, Lasts A Lifetime, Can Be Cleaned Easily, And Will Not Disintegrate..
Max Length Of Pistols Is 8 5/8" & Not Intended For Revolvers.
Case Is Airline Approved For Checked Luggage & Padlockable.
Case Has A Lifetime Warranty & Is 100% Waterproof & Dustproof.
Features
- Holds up to 10 pistols with 10 extra magazine & 2 included silica gels
- Case has a lifetime warranty & is 100% Waterproof & Dustproof
- DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does NOT tear easily, lasts a lifetime, can be cleaned easily, and will NOT disintegrate.
- Case is Airline Approved for checked luggage & padlockable
- Max length of pistols is 8 5/8 & not intended for revolvers
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #18
Case Club 2 Pistol 8 Magazine Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust
Asin: B00K7JBY8G | Ean: 0856792005033 | UPC: 856792005033
Hydro Absorbent Silica Gel Included To Prevent Rust.
Case Club Foam Is Closed-Cell Military-Grade Polyethylene, Which Does Not Absorb Liquids, Does Not Tear Easily, Can Be Cleaned Easily, And Will Not Disintigrate.Do Not Settle For Cheap And Flimsy Diced Foam! Diced Foam Tears Easily, Retains Water (Rust!), Collects Dirt, And Even If Left Untouched Will Eventually Disintegrate Right Into Your Gun!.
Max Length Of Pistols Is 8 5/8" & Not Intended For Revolvers.
Case Has A Lifetime Warranty & Is 100% Waterproof, & Dustproof.
Case Is Airline Approved For Checked Luggage & Padlockable.
Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags, Or Remove The Spacer For Double Stack Mags!.
Fits Under-Barrel Attachments, But Likely Will Not Fit User Red Dot Sights.
Features
- Holds up to 2 pistols with 8 extra magazines (+2 more mags in magwells)
- Fits under-barrel attachments, but likely will NOT fit user red dot sights
- Hydro absorbent silica gel included to prevent rust
- Utilize our specially designed magazine spacers for your single stack mags, or remove the spacer for double stack mags!
- Case has a lifetime warranty & is 100% Waterproof, & Dustproof
- Case is Airline Approved for checked luggage & padlockable
- Case Club foam is closed-cell military-grade polyethylene, which does not absorb liquids, does not tear easily, can be cleaned easily, and will not disintigrate.DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if left untouched will eventually DISINTEGRATE right into your gun!
- Max length of pistols is 8 5/8 & not intended for revolvers
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #19
Case Club Waterproof 6 Revolver/Semi-Auto Case with Silica Gel
Asin: B00X6B5VC2 | Ean: 0856792005248 | UPC: 856792005248
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean.
Max Length Of Revolvers Is 12 1/4.
Case Is Airline Approved For Checked Luggage & Padlockable.
Case Has A Lifetime Warrenty & Is 100% Waterproof, & Dustproof.
Features
- Holds up to 6 revolvers or semi-auto pistols & included silica gel
- Case has a lifetime warrenty & is 100% Waterproof, & Dustproof
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Case is Airline Approved for checked luggage & padlockable
- Max length of revolvers is 12 1/4
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon
Looking For Something Else?
Search